diff options
| -rw-r--r-- | conf/censor.conf.example | 12 | ||||
| -rw-r--r-- | conf/filter.conf.example | 24 | ||||
| -rw-r--r-- | conf/helpop.conf.example | 323 | ||||
| -rw-r--r-- | conf/inspircd.conf.example | 744 | ||||
| -rw-r--r-- | conf/inspire.motd.example | 12 | ||||
| -rw-r--r-- | conf/inspire.quotes.example | 175 | ||||
| -rw-r--r-- | conf/inspire.rules.example | 3 |
7 files changed, 1293 insertions, 0 deletions
diff --git a/conf/censor.conf.example b/conf/censor.conf.example new file mode 100644 index 000000000..89730669f --- /dev/null +++ b/conf/censor.conf.example @@ -0,0 +1,12 @@ +# Configuration file for m_censor.so (1.0.0.0) +# C.J.Edwards May 2004. +# + +# The tags for this module are formatted as follows: +# +# <badword text="simple word" +# replace="text to replace with"> + +<badword text="shit" replace="poo"> +<badword text="fuck" replace="(censored)"> + diff --git a/conf/filter.conf.example b/conf/filter.conf.example new file mode 100644 index 000000000..99e133256 --- /dev/null +++ b/conf/filter.conf.example @@ -0,0 +1,24 @@ +# Configuration file for m_filter.so (2.0.0.0) +# C.J.Edwards April 2004. +# + +# The tags for this module are formatted as follows: +# +# <keyword pattern="any glob pattern here" +# reason="reason for filtering" +# action="action to take"> +# +# Valid actions for 'action' are: +# +# block This blocks the line, sends out a notice to all opers with +# +s and informs the user that their message was blocked. +# +# none This action causes nothing to be done except logging. This +# is the default action if none is specified. +# +# kill This disconnects the user, with the 'reason' parameter as +# the kill reason. + +<keyword pattern="*qwerty*" reason="You qwertied!" action="block"> +<keyword pattern="*killmenow*" reason="As you request." action="kill"> + diff --git a/conf/helpop.conf.example b/conf/helpop.conf.example new file mode 100644 index 000000000..ae4c62229 --- /dev/null +++ b/conf/helpop.conf.example @@ -0,0 +1,323 @@ +# Sample configuration file for m_helpop.so +# You can either copy this into your conf folder and set up the module to use it, +# or you can customise the responses for your network and/or add more. + +<start line1=" InspIRCd help system" + line2=" --------------------" + line3="-" + line4="This system provides help for commands and modes." + line5="Specify your question or a command name as the" + line6="parameter for this command. If you are an oper" + line7="you must prefix your query with a ? symbol." + line8="-" + line9="/HELPOP COMMANDS - To see a list of user commands" + line10="/HELPOP COPER - To see a list of oper commands" + line11="/HELPOP UMODES - To see a list of user modes" + line12="/HELPOP CHMODES - To see a list of channel modes"> + +<nohelp line1="There is no help for the topic" + line2="You searched for. Please try again."> + +<nohelpo line1="There is no help for the topic" + line2="You searched for. Please try again." + line3="-" + line4="Your Query has been forwarded to the IRCops"> + +<commands line1="User Commands" + line2="-------------" + line3="USER NICK QUIT VERSION PING" + line4="PONG ADMIN PRIVMSG INFO TIME" + line5="WHOIS NOTICE JOIN NAMES PART" + line6="KICK MODE TOPIC WHO MOTD" + line7="RULES OPER LIST LUSERS STATS" + line8="USERHOST AWAY ISON SUMMON USERS" + line9="INVITE PASS WHOWAS LINKS MAP" + line10="COMMANDS MODULES"> + +<user line1="/USER [ident] [local host] [remote host] :[GECOS]" + line2="This command is used by your client to register your irc session." + line3="You should not use it during an established connection."> + +<nick line1="/NICK [new nick]" + line2="Change your nickname to [new nick]"> + +<quit line1="/QUIT [reason]" + line2="Quit from IRC and end your current session"> + +<version line1="/VERSION" + line2="Returns the server's version number"> + +<ping line1="/PING [server]" + line2="Ping a server. Target server will answer with a PONG"> + +<pong line2="/PONG [server]" + line2="Your client should send this to answer server PINGs. You" + line3="should not issue this command manually."> + +<admin line1="/ADMIN [server]" + line2="Fetches the administrative information on the given" + line3="server."> + +<privmsg line1="/MSG [target] [text]" + line2="Sends a message to a user or channel specified in [target]"> + +<notice line1="/NOTICE [target] [text]" + line2="Sends a notice to a user or channel specified in [target]"> + +<join line1="/JOIN [channel]{,[channel]} [key]{,[key]}" + line2="Joins one or more channels you provide the names for"> + +<names line1="/NAMES [channel]{,[channel]}" + line2="Return a list of users on the channels you provide"> + +<part line1="/PART [channel]{,[channel]}" + line2="Leaves one or more channels you specify"> + +<kick line1="/KICK [channel] [nick]" + line2="Kicks a user from a channel you specify. You must be" + line3-"At least a channel halfoperator to kick a user"> + +<mode line1="/MODE [target] [+|-][modes]{[+|-][modes]} {mode parameters}" + line2="Sets the mode for a channel or a nickname specified in [target]" + line3="A user may only set modes upon themselves, and may not set the" + line4="+o usermode, and a user may only change channel modes of" + line5="channels where they are at least a halfoperator."> + +<topic line1="/TOPIC [channel] {topic}" + line2="Sets or retrieves the channel topic. If a channel topic is" + line3="given in teh command and the channel is either not +t, or" + line4="You are at least a halfoperator, the channel topic will be" + line5="changed to the new one you provide"> + +<who line1="/WHO [channel|nick|servermask|o 0]" + line2="Looks up the information of users matching the range you" + line3="provide. You may only /WHO nicknames in channels or on servers" + line4="where you share a common channel with them." + line5="The syntax '/WHO o 0' shows a list of online IRC operators."> + +<motd line1="/MOTD [server]" + line2="Show the message of the day for [server]. Messages of the" + line3="day contain important server rules and notice and should be" + line4="read before using a server in any way!"> + +<rules line1="/RULES" + line2="Show the rules file for the local server. This is similar in" + line3="effect to /MOTD except that rules are optional. All users are" + line4="sent the MOTD when they connect without having to request it."> + +<oper line1="/OPER [login] [password]" + line2="Attempts to authenticate a user as an IRC operator." + line3="Please be aware that both successful and unsucessful oper attempts" + line4="Are logged, and sent to online IRC operators"> + + +<list line1="/LIST [pattern]" + line2="Creates a list of all existing channels matching the glob pattern" + line3="[pattern], e.g. *chat* or bot*"> + +<lusers line1="/LUSERS" + line2="Shows a count of local and remote users, servers and channels."> + +<stats line1="/STATS [symbol]" + line2="Shows various server statistics. Depending on configuration this" + line3="command may be reserved for oper-only use." + line4="-" + line5="Valid symbols are:" + line6="-" + line7="m Show command statistics, number of times commands have been used" + line8="z Show memory usage statistics" + line9="o Show a list of all valid oper usernames and hostmasks" + line10="l Show all inbound and outbound server and client connections" + line11="u Show server uptime" + line12="k Show k-lines (local bans)" + line13="g Show g-lines (global bans)" + line14="q Show q-lines (nick mask bans)" + line15="Z Show z-lines (ip mask bans)" + line16="Y Show connection classes" + line17="C Show link blocks" + line18="U Show u-lined servers" + line19="P Show online opers and their idle times" + line20="I Show connect class permissions" + line21="e Show e-lines (local ban exemptions)" + line22="-" + line23="Note that all /STATS use is broadcast to online IRC operators."> + +<kline line1="/KLINE [user@host] {[duration] :[reason]}" + line2="Sets or removes a k-line (host based ban) on a host and ident mask." + line3="You must specify at least 3 parameters to add a ban, and one" + line4="parameter to remove a ban (just the user@host section)." + line5="The duration may be specified in seconds, or in the following format" + line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," + line7="5 minutes and 6 seconds. All fields in this format are optional."> + +<zline line1="/ZLINE [ipmask] {[duration] :[reason]}" + line2="Sets or removes a z-line (ip based ban) on an ip range mask." + line3="You must specify at least 3 parameters to add a ban, and one" + line4="parameter to remove a ban (just the user@host section)." + line5="The duration may be specified in seconds, or in the following format" + line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," + line7="5 minutes and 6 seconds. All fields in this format are optional."> + +<qline line1="/QLINE [nickmask] {[duration] :[reason]}" + line2="Sets or removes a q-line (nick based ban) on a nick mask." + line3="You must specify at least 3 parameters to add a ban, and one" + line4="parameter to remove a ban (just the user@host section)." + line5="The duration may be specified in seconds, or in the following format" + line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," + line7="5 minutes and 6 seconds. All fields in this format are optional."> + +<gline line1="/GLINE [user@host] {[duration] :[reason]}" + line2="Sets or removes a g-line (global host based ban) on host mask." + line3="You must specify at least 3 parameters to add a ban, and one" + line4="parameter to remove a ban (just the user@host section)." + line5="The duration may be specified in seconds, or in the following format" + line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," + line7="5 minutes and 6 seconds. All fields in this format are optional."> + +<eline line1="/ELINE [user@host] {[duration] :[reason]}" + line2="Sets or removes a e-line (local ban exception) on host mask." + line3="You must specify at least 3 parameters to add an exception, and one" + line4="parameter to remove an exception (just the user@host section)." + line5="The duration may be specified in seconds, or in the following format" + line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours," + line7="5 minutes and 6 seconds. All fields in this format are optional."> + +<userhost line1="/USERHOST [nickname]" + line2="Returns the hostname and nickname of a user, and some other" + line3="miscellanious information."> + +<away line1="/AWAY {message}" + line2="If a message is given, marks you as being away, otherwise" + line3="removes your away status and previous message"> + +<ison line1="/ISON [nick] {[nick]...}" + line2="Returns a subset of the nicks you give, showing only those" + line3="that are currently online."> + +<summon line1="/SUMMON [user]" + line2="Summons a user from the shell where the ircd is running onto irc" + line3="This command is deprecated in the current protocol."> + +<users line1="/USERS" + line2="Shows users logged into the shell where the ircd is running." + line3="This command is deprecated in the current protocol."> + +<invite line1="/INVITE [nick] [channel]" + line2="Invites a user to a channel. If the channel is NOT +i, any" + line3="user, channel op or not, may invite any other user to the" + line4="channel, so long as they are a member of that channel." + line5="Otherwise, if +i is set only channel halfoperators" + line6="and above may invite users into the channel"> + +<pass line1="/PASS [password]" + line2="This command is used by your irc client when setting up" + line3="your irc session, and should not be issued by a fully" + line4="connected client."> + +<whowas line1="/WHOWAS [nick]" + line2="Returns a list of times the user was last seen on irc" + line3="along with the time they were last seen and their server."> + +<links line1="/LINKS" + line2="Shows all servers linked to this one. Note that in this" + line3="server implementation all links will be flattened as" + line4="a tree based layout is not in use."> + +<map line1="/MAP" + line2="Shows a graphical representation of all users and servers" + line3="on the network. The tree diagram is inaccurate in this" + line4="implementation as a tree based network is not in place."> + + +<coper line1="Oper Commands" + line2="-------------" + line3="DIE RESTART KILL REHASH TRACE" + line4="CONNECT SQUIT MODULES KLINE ZLINE" + line5="QLINE GLINE ELINE"> + +<die line1="/DIE [password]" + line2="If the correct password is provided, and you are an operator," + line3="This command will shut down the local server."> + +<restart line1="/RESTART [password]" + line2="If the correct password is provided, and you are an operator," + line3="This command will restart the local server."> + +<commands line1="/COMMANDS" + line2="Shows all currently available commands."> + +<kill line1="/KILL [user] [reason]" + line2="This command will disconnect a user from IRC with the given" + line3="reason."> + +<rehash line1="/REHASH" + line2="This command will cause the server configuration file to be" + line3="re-read and values re-initialised."> + +<trace line1="/TRACE [nick|user@host|servermask]" + line2="This command will provide a list of all users and servers which" + line3="must be passed through or over to reach a given object (server" + line4="or user)"> + +<connect line1="/CONNECT [servermask]" + line2="Create a mesh connection to the given servermask. You must have" + line3="configured the server for linking in your configuration file," + line4="and provided a password."> + +<squit line1="/SQUIT" + line2="Disconnects the local server from the mesh network, causing every" + line3="other server in the mesh to drop it."> + +<modules line1="/MODULES" + line2="Lists currently loaded modules, their memory offsets and version" + line3="numbers and flags. If you are not an operator, you will see reduced" + line4="detail."> + +<loadmodule line1="/LOADMODULE [filename.so]" + line2="Loads a module into the IRCd."> + +<unloadmodule line1="/UNLOADMODULE [filename.so]" + line3="Unloads a module from the IRCd. The module cannot have the static" + line4="flag set (see the output of /MODULES)"> + +<umodes line1="User Modes" + line2="----------" + line3="o Is an IRC operator" + line4="i Is invisible to /WHO" + line5="w Can receive wallops messages" + line6="s Can receive server notices" + line7="x Cloaked hostname (requires cloaking module)" + line8="g Can receive globops (requires globops module)" + line9="h Will receive helpops notification (requires helpop module)"> + +<chmodes line1="Channel Modes" + line2="-------------" + line3="v [nickname] Gives voice to [nickname] (can talk on +m channel)" + line4="h [nickname] Gives halfops to [nickname] (requires halfop module)" + line5="o [nickname] Gives ops to [nickname]" + line6="b [hostmask] Bans [hostmask] on the channel" + line7="a [nickname] Give protected status to [nickname] (+q only)" + line8="q [nickname] Give founder status to [nickname] (ulines only)" + line9="i Make the channel invite only, must /INVITE users" + line10="k [key] Set the channel key (password) to [key]" + line11="l [limit] Set the maximum possible users to [limit]" + line12="m Enable moderation. Only +vo(h) can speak" + line13="n Only users who are members of the channel may message it" + line14="p Make channel private (hide from /LIST)" + line15="s Make channel secret (can't be used at the same time as +p)" + line16="O Channel is IRCops only (can only be set by IRCops)" + line17="t Only halfops and above can change the topic" + line18="Q Only U-Lined servers/nicks can kick" + line19="T Only halfops/ops can send NOTICEs to the channel" + line20="C No CTCPs allowed to the channel" + line21="c mIRC colour codes blocked on the channel" + line22="K No /KNOCK allowed to channel (if knock module is loaded)" + line23="L [channel] If the channel is full, redirect users to [channel]" + line24="N No nickchanges while on the channel" + line25="-------------" + line26="NOTE: A large number of these modes are dependent upon server-side modules" + line27="being loaded by a server/network administrator. The actual modes available" + line28="on your network may be very different to this list. Please consult your" + line29="help channel if you have any questions."> + + diff --git a/conf/inspircd.conf.example b/conf/inspircd.conf.example new file mode 100644 index 000000000..ac48be1ee --- /dev/null +++ b/conf/inspircd.conf.example @@ -0,0 +1,744 @@ +######################################################################## +# # +# --------------------------- # +# InspIRCd Configuration File # +# --------------------------- # +# # +##################################||#################################### + #||# +##################################||#################################### +# # +# This is an example of the config file for InspIRCd. # +# Change the options to suit your network # +# # +# Last updated on : 06/06/2005 # +# Written by : CC (cc@backchat.co.za) # +# Updated by : katsklaw (katsklaw@gmail.com) # +######################################################################## + + + +#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#- +# # +# Here is where you enter the information about your server. # +# # +# Syntax is as follows: # +# <server name="server.name" # +# description="Server Description" # +# network="MyNetwork"> # +# # + +<server name="penguin.omega.org.za" + description="Waddle World" + network="Omega"> + + +#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-# +# # +# Describes the Server Administrator's real name, nick # +# and email address. # +# # +# Syntax is as follows: # +# <admin name="real name" # +# nick="nick name" # +# email="email@address.com"> # +# # + +<admin name="Johnny English" + nick="MI5" + email="MI5@the.best.secret.agent"> + + +#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- +# # +# Enter the port and address bindings here. # +# # +# bind address - specifies which the address which ports bind # +# port - opens an unused port # +# type - can be 'clients' or 'servers'. The clients type is # +# a standard tcp based socket, the servers type is a # +# also a TCP based connection but of a different # +# format. # +# default - if the port type is 'servers' then this can be # +# specified. If set to 'yes', it indicates that this # +# port is the default route for all /connect commands.# +# if you do not bind your default route to an # +# external ip, or all ip's, you may have connection # +# problems. # +# # +# Leaving address empty binds to all available interfaces # +# # +# Syntax is as follows: # +# # +# <bind address="ip number" port="port" type="clients"> # +# <bind address="ip number" port="port" type="servers"> # +# <bind address="ip number" port="port" type="servers" default="yes"> # +# # + +<bind address="" port="6660" type="clients"> +<bind address="" port="7000" type="servers" default="yes"> +<bind address="" port="7001" type="servers"> + + +#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- +# # +# You can configure the passwords here which you wish to use for # +# the die and restart commands. Only trusted ircops who will # +# need this ability should know the die and restart password. # +# # +# Syntax is as follows: # +# <power diepass="die password" restartpass="restart password" # +# pause="secs before dying"> # +# # + +<power diepass="diepass" restartpass="restartpass" pause="2"> + + +#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# This optional tag allows you to include another config file # +# allowing you to keep your configuration tidy. The configuration # +# file you include will be treated as part of the configuration file # +# which includes it, in simple terms the inclusion is transparent. # +# # +# All paths to config files are relative to the directory of the main # +# config file inspircd.conf, unless the filename starts with a forward# +# slash (/) in which case it is treated as an absolute path. # +# # +# Syntax is as follows: # +# <include file="file.conf"> # +# # + +#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#- +# # +# This is where you can configure which connections are allowed # +# and denied access onto your server. # +# The password is optional. # +# You may have as many of these as you require. # +# To allow/deny all connections use a * # +# # +# Syntax is as follows: # +# <connect allow="ip or host"> # +# <connect allow="ip or host" password="blahblah"> # +# <connect allow="ip or host" password="blah" timeout="10"> # +# <connect allow="ip or host" timeout="blah" flood="5"> # +# <connect allow="ip or host" threshold="8" pingfreq="120"> # +# <connect allow="ip or host" sendq="99999" revcq="696969"> # +# <connect deny="ip or host"> # +# # +# You may optionally include timeout="x" on any allow line, which # +# specifies the amount of time given before an unknown connection # +# is closed if USER/NICK/PASS are not given. This value is in secs # +# # +# You may also optionally include a flood="x" line which indicates # +# the number of lines a user may place into their buffer at once # +# before they are disconnected for excess flood. The default is to # +# DISABLE this feature. A recommended value is 10. A counter is # +# maintained for each user which is reset every 'threshold' seconds # +# and specifying this threshold value with threshold="X" indicates # +# how often the counter is reset. For example, with flood="5" and # +# threshold="8", the user may not send more than 5 lines in 8 secs. # +# # +# You may optionally specify the sendq size and ping frequency of # +# each connect:allow line using the pingfreq="X" and sendq="X" # +# settings as shown in the full example below. # +# The ping frequency is specified in seconds, and the sendq size # +# in bytes. It is recommended, although not enforced, that you # +# should never set your sendq size to less than 8k. Send Queues are # +# dynamically allocated and can grow as needed up to the maximum # +# size specified. # +# # +# The optional recvq value is the maximum size which users in this # +# group may grow their receive queue to. This is recommended to be # +# kept pretty low compared to the sendq, as users will always # +# recieve more than they send in normal circumstances. The default # +# if not specified is 4096. # +# # +# IMPORTANT NOTE, CALL THE CONFUSION POLICE! # +# The sendq is the data waiting to be sent TO THE USER. # +# The recvq is the data being received FROM THE USER. # +# The names sendq and recvq are from the SERVER'S PERSPECTIVE not # +# that of the user... Just to clear up any confusion or complaints # +# that these are backwards :p # +# # + +<connect allow="196.12.*" password="secret"> +<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096"> + +<connect deny="69.254.*"> + + +#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- +# # +# Classes are a group of commands which are grouped together # +# and given a unique name. They used to define which commands # +# are available to certain types of Operators. # +# # +# Syntax is as follow: # +# <class name="name" commands="oper commands"> # +# # + +<class name="Shutdown" commands="DIE RESTART REHASH"> +<class name="ServerLink" commands="CONNECT SQUIT"> +<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE SHUN"> +<class name="OperChat" commands="WALLOPS CHATOPS"> +<class name="HostCloak" commands="SETHOST SETIDENT SETNAME"> + + +#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# +# # +# This is where you specify which types of operators you have on # +# your server, as well as the commands they are allowed to use. # +# This works alongside with the classes specified above. # +# # +# type name - a name for the combined class types # +# classes - specified above, used for flexibility for the # +# server admin to decide on which operators get # +# what commands # +# host - hostmask operators will recieve on oper-up. # +#(optional) # +# # +# Syntax is as follows: # +# <type name="name" classes="class name" host="oper hostmask"> # +# # + +<type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za"> +<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za"> +<type name="LocalOp" classes="OperChat BanControl HostCloak" host="local.omega.org.za"> +<type name="Helper" classes="HostCloak" host="helper.omega.org.za"> + + +#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# +# # +# Opers are defined here. This is a very important section. # +# Remember to only make operators out of truthworthy people. # +# # +# name - oper name, best to use lower-case # +# password - password to oper-up, # +# encryption not supported by inspircd. However, there # +# are modules that allow for oper password encryption. # +# # +# host - host of client allowed to oper-up, more hostmasks # +# seperated by spaces, wildcards accepted # +# type - specified above, defines the kind of operator # +# # +# Syntax is as follows: # +# <oper name="login" # +# password="pass" # +# host="hostmask@of.oper" # +# type="oper type"> # +# # + +<oper name="katsklaw" + password="s3cret" + host="*@*" + type="NetAdmin"> + + +#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-# +# # +# Defines which servers can link to this one, and which servers this # +# server may create outbound links to. # +# # +# name - The name is the canocial name of the server, it does # +# not have to resolve - but it is expected to be sent # +# in the remote servers connection info. # +# ipaddr - Valid host or ip address for remote server. * # +# port - Valid listening UDP port for remote server. # +# sendpass - Password to send to create an outbound connection to # +# this server. # +# recvpass - Password to receive to accept an inbound connection # +# from this server. # +# autoconnect - Sets the server to autoconnect. Where x is the number # +# (optional) of seconds between attempts. 300 = 5 minutes # +# # +# to u:line a server (give it extra privilages required for running # +# services, Q, etc) you must include the <uline server> tag as shown # +# in the example below. You can have as many of these as you like. # +# # +# WARNING: Unlike other ircds, u:lining a server allows ALL users on # +# that server to operoverride modes. This should only be used for # +# services and protected oper servers! # +# # +# IMPORTANT NOTE: When specifying the ip address and/or host, the # +# server software will prioritize RESOLVED hostnames above ip # +# addresses, so for example if your target server resolves to a.b.com # +# you MUST put a.b.com into your link block, and NOT the IP address # +# of a.b.com. The system uses reverse resolution. # +# # + +<link name="hub.penguin.org" + ipaddr="penguin.box.com" + port="7000" + autoconnect="300" + sendpass="outgoing!password" + recvpass="incoming!password"> + +<link name="services.antarctic.com" + ipaddr="localhost" + port="7000" + sendpass="penguins" + recvpass="polarbears"> + +<uline server="services.antarctic.com"> + + +#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# +# # +# These options let you define the path to your motd and rules # +# files. # +# # + +<files motd="/home/cc/inspircd/conf/inspire.motd" + rules="/home/cc/inspircd/conf/inspire.rules"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# Define your DNS server address here. InspIRCd has its own resolver # +# and you must define this otherwise nobody's host will resolve. The # +# timeout value is in seconds. # +# # + +<dns server="127.0.0.1" timeout="5"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# Define the path to the PID file here. The PID file can be used to # +# rehash the ircd from the shell or to terminate the ircd from the # +# shell using shell scripts, perl scripts etc, and to monitor the # +# ircd's state via cron jobs. # +# # + +<pid file="/path/to/inspircd.pid"> + +#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# Use these tags to customise the ban limits on a per channel basis. # +# the tags are read from top to bottom, and any tag found which # +# matches the channels name applies the banlimit to that channel. # +# It is advisable to put an entry with the channel as '*' at the # +# bottom of the list. If none are specified or no maxbans tag is # +# matched, the banlist size defaults to 64 entries. # +# # + +<banlist chan="#morons" limit="128"> +<banlist chan="*" limit="69"> + +#-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# This tag is optional, and specifies one or more commands which are # +# not available to non-operators. For example you may wish to disable # +# NICK and prevent non-opers from changing their nicknames. # +# Note that any disabled commands take effect only after the user has # +# 'registered' (e.g. after the initial USER/NICK/PASS on connection) # +# so for example disabling NICK will not cripple your network. # +# # +# <disabled commands="TOPIC MODE"> # +# # + + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# Just remove this... Its here to make you read ALL of the config # +# file options ;) # + +<die value="You should probably edit your config *PROPERLY* and try again."> + + + +#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# Settings to define which features are useable on your server. # +# # +# prefixquit - a prefix for a client's quit message # +# loglevel - specifies what detail of messages to log in the # +# log file. You may select from debug, verbose, # +# default, sparse and none. # +# allowhalfop - allows the +h channel mode # +# noservices - If noservices is true, yes, or 1, then the first # +# user into a channel gets founder status. This is # +# only useful on networks running the m_chanprotect # +# module without services. # +# netbuffersize - size of the buffer used to receive data from # +# clients. The ircd may only read() this amount # +# of text in one go at any time. (OPTIONAL) # +# maxwho - The maximum number of results returned by a /WHO # +# query. This is to prevent /WHO being used as a # +# spam vector or means of flooding an ircd. The # +# default is 128, it is not recommended to raise it # +# above 1024. Values up to 65535 are permitted. # +# somaxconn - The maximum number of sockets that may be waiting # +# in the accept queue. This usually allows the ircd # +# to soak up more connections in a shorter space of # +# time when increased but please be aware there is a # +# system defined maximum value to this, the same way # +# there is a system defined maximum number of file # +# descriptors. Some systems may only allow this to # +# be up to 5 (ugh) while others such as FreeBSD will # +# default to a much nicer 128. # +# moduledir - This optional value indicates a runtime change of # +# the location where modules are to be found. This # +# does not add a supplementary directory. There can # +# only be one module path. # +# softlimit - This optional feature allows a defined softlimit. # +# if defined sets a soft maxconnections value, has # +# to be less than the ./configure maxclients # +# # + +<options prefixquit="Quit: " + loglevel="default" + netbuffersize="10240" + maxwho="128" + noservices="0" + somaxconn="128" + softlimit="128" + allowhalfop="yes"> + + + +#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# These tags define which modules will be loaded on startup by your # +# server. Add modules without any paths. When you make your ircd # +# using the 'make' command, all compiled modules will be moved into # +# the folder you specified when you ran ./configure. The module tag # +# automatically looks for modules in this location. # +# If you attempt to load a module outside of this location, either # +# in the config, or via /LOADMODULE, you will receive an error. # +# # +# By default, ALL modules are commented out. You must uncomment them # +# or add lines to your config to load modules. Please refer to # +# http://www.inspircd.org/wiki/Modules_List for a list of modules and# +# each modules link for any additional conf tags they require. # +# # +# WINDOWS USERS PLEASE NOTE: You can still load these modules! They # +# are incorporated into the executable and can be loaded and removed # +# similarly to if they were in a ramdisk. # + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Foobar module - does nothing +#<module name="m_foobar.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Chanprotect module: gives +q and +a channel modes +#<module name="m_chanprotect.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Globops module: gives /GLOBOPS and usermode +g +#<module name="m_globops.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Noinvite module: Gives channel mode +V +#<module name="m_noinvite.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Oper MD5 module: Allows MD5 hashed oper passwords +#<module name="m_opermd5.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Restricted channels module: Allows only opers to create channels +#<module name="m_restrictchans.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Deny Channels: Deny Channels from being used by users +#<module name="m_denychans.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Services support module: Adds several usermodes such as +R and +M +#<module name="m_services.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Userip module: Adds the /USERIP command +#<module name="m_userip.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Alias module: Allows you to define server-side command aliases +#<module name="m_alias.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# CHGHOST module: Adds the /CHGHOST command +#<module name="m_chghost.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# HELPOP module: Provides the /HELPOP command +#<module name="m_helpop.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# No kicks module: Adds the +Q channel mode +#<module name="m_nokicks.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Oper MOTD module: Provides support for seperate message of the day +# on oper-up +#<module name="m_opermotd.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Restrict message module: Allows users to only message opers +#<module name="m_restrictmsg.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Sethost module: Adds the /SETHOST command +#<module name="m_sethost.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Antibottler module: Labels bottler leech bots +#<module name="m_antibottler.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Watch module: Adds the WATCH command, which is used by clients to +# maintain notify lists. +#<module name="m_watch.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Cloaking module: Adds usermode +x and cloaking support +#<module name="m_cloaking.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Hostchange module: Allows a different style of cloaking +#<module name="m_hostchange.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# No nicks module: Adds the +N channel mode +#<module name="m_nonicks.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Override module: Adds support for oper override +#<module name="m_override.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SAJOIN module: Adds the /SAJOIN command +#<module name="m_sajoin.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Set Idle module: Adds a command for opers to change their +# idle time (mainly a toy) +#<module name="m_setidle.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Block colour module: Adds the +c channel mode +#<module name="m_blockcolor.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Conn-Lusers: Shows the LUSERS output on connect +#<module name="m_conn_lusers.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Ident: Provides RFC 1413 ident lookup support +#<module name="m_ident.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# No Notice module: adds the channel mode +T +#<module name="m_nonotice.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Parking module: Adds parking support and /PARK and /UNPARK +#<module name="m_park.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SAMODE module: Adds the oper /SAMODE command +#<module name="m_samode.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SETNAME module: Adds the /SETNAME command +#<module name="m_setname.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Botmode module: Adds the user mode +B +#<module name="m_botmode.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Filter module: Provides glob-based message filtering +#<module name="m_filter.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Knock module: adds the /KNOCK command and +K channel mode +#<module name="m_knock.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Oper channels mode: Adds the +O channel mode +#<module name="m_operchans.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Random Quote module: provides a random quote on connect +#<module name="m_randquote.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SANICK module: Allows opers to change user's nicks +#<module name="m_sanick.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Show Whois module: Adds the +W usermode which allows opers +# to see when they are whois'ed +#<module name="m_showwhois.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Strip colour module: Adds the channel mode +S +#<module name="m_stripcolor.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Censor module: Adds the channel mode +G +#<module name="m_censor.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Nick locking module: Adds the oper-only /NICKLOCK command +#<module name="m_nicklock.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Oper Join module: Forces opers to join a channel on oper-up +#<module name="m_operjoin.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Redirect module: Adds channel redirection (mode +L) +#<module name="m_redirect.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SAPART module: Adds the oper /SAPART command +#<module name="m_sapart.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SILENCE module: Adds support for /SILENCE +#<module name="m_silence.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Test command module: Does nothing significant +#<module name="m_testcommand.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Channel filter module: Allows channel-op defined message +# filtering using simple string matches (channel mode +g) +#<module name="m_chanfilter.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# No ctcp module: Adds the channel mode +C to block CTCPs +#<module name="m_noctcp.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Oper levels module: Gives each oper a level and prevents +# actions being taken against higher level opers +#<module name="m_operlevels.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Remove module: Adds the /REMOVE command which is a peaceful +# alternative to /KICK +#<module name="m_remove.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) +#<module name="m_saquit.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Timed bans module: Adds timed bans and the /TBAN command +#<module name="m_timedbans.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Oper modes module: Allows you to specify modes to add/remove on oper +#<module name="m_opermodes.so"> + + +#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# +# # +# Optional - If you specify to use the m_filter.so module, then # +# specfiy below the path to the filter.conf file. # + +#<filter file="/path/to/inspircd/filter.conf"> + + +#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# +# # +# Optional - If you specify to use the m_helpop.so module, then # +# specify below the path to the helpop.conf file. # + +<die value="If you used the helpop include above then do *NOT* use this tag."> +#<helpop file="/path/to/inspircd/helpop.conf"> + + +#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# +# # +# Optional - If you specify to use the m_randquotes.so module, then # +# specify below the path to the randquotes.conf file. # + +#<randquote file="/path/to/inspircd/randquotes.conf"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# The ban tags define nick masks, host masks and ip ranges which are # +# banned from your server. All details in these tags are local to # +# Your server. # +# # +# # +# badip lines ban an ip range (same as a zline) # +# # +# ipmask - The ip range to ban (wildcards possible) # +# reason - Reason to display when disconnected # +# # +# badnick lines ban a nick mask (same as a qline) # +# # +# nick - Nick mask to ban (wildcards possible) # +# reason - Reason to display on /NICK # +# # +# badhost lines ban a user@host mask (same as a kline) # +# # +# host - ident@hostname (wildcards possible) # +# reason - Reason to display on disconnection # +# # +# exception lines define a hostmask that is excempt from [kzg]lines # +# # +# host - ident@hostname (wildcards possible) # +# reason - Reason, shown only in /stats e # +# # + +<badip ipmask="69.69.69.69" reason="No porn here thanks."> + +<badnick nick="ChanServ" reason="Reserved For Services"> +<badnick nick="NickServ" reason="Reserved For Services"> +<badnick nick="OperServ" reason="Reserved For Services"> +<badnick nick="MemoServ" reason="Reserved For Services"> + +<badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots"> +<badhost host="*@localhost" reason="No irc from localhost!"> + +<exception host="*@ircop.host.com" reason="Opers hostname"> + +#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# If you have the m_alias.so module loaded, you may also define # +# aliases as shown below. They are commonly used to provide shortcut # +# commands to services, however they are not limited to jsut this use.# +# An alias tag requires the following values to be defined in it: # +# # +# text - The text to detect at the start of the line, # +# must be at the start of the line to trigger the # +# alias. May contain spaces, but case insensitive. # +# replace - The text to replace 'text' with. Usually this # +# will be "PRIVMSG ServiceName :" or similar. # +# requires - If you provide a value for 'requires' this means # +# the given nickname MUST be online for the alias # +# to successfully trigger. If they are not, then # +# the user receives a 'no such nick' 401 numeric. # +# uline - Defining this value with 'yes', 'true' or '1' # +# will ensure that the user given in 'requires' # +# must also be on a u-lined server, as well as # +# actually being on the network. If the user is # +# online, but not on a u-lined server, then an # +# oper-alert is sent out as this is possibly signs # +# of a user trying to impersonate a service. # +# # + +<alias text="NICKSERV" replace="PRIVMSG NickServ :" requires="NickServ" uline="yes"> +<alias text="CHANSERV" replace="PRIVMSG ChanServ :" requires="ChanServ" uline="yes"> +<alias text="NS" replace="PRIVMSG NickServ :" requires="NickServ" uline="yes"> +<alias text="CS" replace="PRIVMSG ChanServ :" requires="ChanServ" uline="yes"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# You should already know what to do here :) # + +<die value="You should probably edit your config *PROPERLY* and try again."> + + +######################################################################### +# # +# -InspIRCd Development and Coding Team- # +# www.inspircd.org # +# # +######################################################################### diff --git a/conf/inspire.motd.example b/conf/inspire.motd.example new file mode 100644 index 000000000..67df9d3db --- /dev/null +++ b/conf/inspire.motd.example @@ -0,0 +1,12 @@ + + _____ _____ _____ _____ _ +|_ _| |_ _| | __ \ / ____| | | + | | _ __ ___ _ __ | | | |__) || | __| | + | | | '_ \ / __| | '_ \ | | | _ / | | / _` | + _| |_ | | | | \__ \ | |_) | _| |_ | | \ \ | |____ | (_| | +|_____| |_| |_| |___/ | .__/ |_____| |_| \_\ \_____| \__,_| + __________________| |_______________________________ + |__________________|_|_______________________________| + + Insert something funkeh here + diff --git a/conf/inspire.quotes.example b/conf/inspire.quotes.example new file mode 100644 index 000000000..9b2bc0f6a --- /dev/null +++ b/conf/inspire.quotes.example @@ -0,0 +1,175 @@ +Men are from Mars. Women are from Venus. Computers are from hell +Computer /nm./: a device designed to speed and automate errors +Hardware /nm./: the part of the computer that you can kick. +Maniac /n./ An early computer built by nuts. +RAM /abr./: Rarely Adequate Memory. +Programmer /n./ A red-eyed, mumbling mammal capable of conversing with inanimate objects +Multitasking /adj./ 3 PCs and a chair with wheels +Plonk /excl./: The sound a newbie makes as he falls to the bottom of a kill file +hURL /n./: a link to a web site that makes you want to puke +SUPERCOMPUTER: what it sounded like before you bought it. +If it's really a supercomputer, how come the bullets don't bounce off when I shoot it? . The Covert Comic. +A computer is like an Old Testament god, with a lot of rules and no mercy. . Joseph Campbell +I dropped my computer on my foot! That Megahurtz!! +A computer's attention span is as long as it's power cord +586: The average IQ needed to understand a PC +Memory is like an orgasm. It's a lot better if you don't have to fake it +If it jams, force it. If it breaks, it needed replacing anyway. +A bus station is where a bus stops. A train station is where a train stops. On my desk I have a workstation.. +Want to come see my HARD DRIVE ? I promise it isn't 3.5 inches and it ain't floppy. . Geek pick-up line. +If you torture the data enough, it will confess. . Ronald Coase +If you give someone a program, you will frustrate them for a day; if you teach them how to program, you will frustrate them for a lifetime +ASCII stupid question, get a stupid ANSI! +Use the source, Luke... +Programming is an art form that fights back +MacOS, Windows, BeOS: they're all just Xerox copies +Whenever you think you have a clever programming trick... forget it! +Managing senior programmers is like herding cats. . Dave Platt +Your program is sick ! Shoot it and put it out of its memory +/* You are not expected to understand this */ +To define recursion, we must first define recursion +ERROR: Computer possessed; Load EXOR.SYS ? [Y/N] +Linux is only free if your time is worthless +Linux: find out what you've been missing while you've been rebooting Windows NT +unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep +Profanity is the one language all programmers know best +It's 5.50 a.m.... Do you know where your stack pointer is? +#define QUESTION ((bb) || !(bb)) . Shakespeare +The more I C, the less I see. +Confucius say: He who play in root, eventually kill tree. +Unix is the answer, but only if you phrase the question very carefully +C++: Hard to learn and built to stay that way +Java is, in many ways, C++-- . Michael Feldman. +They don't make bugs like Bunny anymore . Olav Mjelde +If debugging is the process of removing software bugs, then programming must be the process of putting them in +When the only tool you own is a hammer, every problem you encounter resembles a nail +System Error: press F13 to continue... +To err is human, but for a real disaster you need a computer +Computers make very fast, very accurate mistakes +Life would be so much easier if we only had the source code +Who is this 'General Failure' and why is he reading my disk? +hAS aNYONE sEEN MY cAPSLOCK kEY? +InspIRCd, now with excessive ammounts of Cheeze +I'm in the computer business, I make Out-Of-Order signs +Kevorkian Virus: helps your computer shut down whenever it wants to. + [OUT OF QUOTES, PLEASE ORDER MORE] +Error, no keyboard . press F1 to continue. +Insert Something Funkeh.. err.. There! --> +Cannot delete tmp150---3.tmp: There is not enough free disk space. Delete one or more files to free disk space, and then try again +File not found. Should I fake it ? (Y/N) +The definition of an upgrade: Take old bugs out, put new ones in +If it's not on fire, it's a software problem +My software never has bugs. It just develops random features +It's a little-known fact that the Y1K problem caused the Dark Ages +Artificial Intelligence usually beats natural stupidity +Making fun of AOL users is like making fun of the kid in the wheel chair +Daddy, why doesn't this magnet pick up this floppy disk? +Daddy, what does FORMATTING DRIVE C mean? +See daddy ? All the keys are in alphabetical order now. +If you can't beat your computer at chess, do what I did . try kick-boxing. +Enter any 11-digit prime number to continue... +ASCII and ye shall receive. +The web is a dominatrix. Every where I turn, I see little buttons ordering me to Submit. +<FrostyCoolSlug> NO, You cannot dial 999, I'm downloading my mail ;/ +640K ought to be enough for anybody. . Bill Gates, 1981 +Windows not found, [P]arty, [C]elebrate, [D]rink? +English, the Microsoft of languages... +It's been said that Bill Gates named his company after his dick... +Ever notice how fast Windows runs ? -- Neither did I +If at first you don't succeed, work for Microsoft +We are Microsoft. Resistance Is Futile. You Will Be Assimilated +"Microsoft Works." . Oxymoron +Windows isn't a virus, viruses do something +PANIC! buffer = :NickServ WRITE_DB(3). <-- JUST KIDDING! +It just keeps going and going and going and going and goi <BANG> +All that I know is that nukes are comming from 127.0.0.1 +I know all about the irc and the mirc cops. +M re ink n ed d, ple s r fil +Please refrain from feeding the IRC Operators. Thank you. +I know all about mirc stuff, hmm.. I think this channel is experiencing packet loss.. +MacDonalds claims Macintosh stole their next idea of the iMac +I can't hold her any longer, captain, she's gonna bl.. sorry, got caught up in the moment +I recommend purchasing a Cyrix CPU for testing nuclear meltdowns +Is it an international rule to have the worst picture possible on your driver license? +Have you hugged your services coder, today? +Ever wonder why they make the colon flash on alarm clocks? +Whats this?.. blue screen with a VXD error?!.. I'VE BEEN NUKED! +do-do-bop-doo-doo-do-do-doo.. For those of you who know that song, you have problems.. +be wery wery quiet... hunting wabbit... +I've been IRC Nuked"Great warrior? War does not make one great." - Yoda +"I find your lack of faith.....disturbing." - Darth Vader +"I have a bad feeling about this.."--All of the Star Wars characters. +Can I upgrade my Hard Drive to a WARP drive? +Canadian DOS prompt: EH?\> +Canadian DOS: "Yer sure, eh?" [y/n] +CONGRESS.SYS Corrupted: Re-boot Washington D.C (Y/n)? +I don't have a solution but I admire the problem. +Famous Last Words: Trust me. I know what I'm doing. +Hey Captain, I just created a black ho-÷p!%$û NO CARRIER +I like work ... I can sit and watch it for hours. +Access denied--nah nah na nah nah! +Bad command. Bad, bad command! Sit! Stay! Staaay.. +Error: Keyboard not attached. Press F1 to continue. +*grumble* "You're just supposed to sit here?" +"Hey, what's this button d..<BOOM>" -W. Crusher +"He has become One with Himself!" "He's passed out!" "That too."-B5 +For a funny quote, call back later. +Famous last words: 'You saw a WHAT around the corner?!' +I like work ... I can sit and watch it for hours. +If debugging is the process of removing bugs, then programming must be the process of putting them in. +Copywight 1994 Elmer Fudd. All wights wesewved. +Cannot find REALITY.SYS. Universe halted. +BUFFERS=20 FILES=15 2nd down, 4th quarter, 5 yards to go! +My software never has bugs. It just develops random features. +Why doesn't DOS ever say 'EXCELLENT command or filename!? +Who's General Failure & why's he reading my disk? +Shell to DOS... Come in DOS, do you copy? Shell to DOS... +Computing Definition - Network-Admin: Primary person who just got set up for the blame of the system crash. +An expert is a person who has made all the mistakes which can be made in a very narrow field. +Famous last words: This is the safe way to do it....... +Famous Last Words: Trust me. I know what I'm doing. +Clinton, "I didn't say that - er, well - yes, but I didn't mean..." +CLINTON LEGACY??...even Pharaoh had only ten plagues... +IBM I Bought McIntosh +IBM I Bring Manuals +IBM I've Been Moved +IBM Idolized By Management +IBM Impenetrable Brain Matter +IBM Imperialism By Marketing +IBM Incorrigible Boisterous Mammoth +IBM Inertia Breeds Mediocrity +IBM Ingenuity Becomes Mysterious +IBM Ingrained Batch Mentality +IBM Innovation By Management +IBM Insipid Belligerent Mossbacks +IBM Insipidly Bankrolling Millions +IBM Inspect Before Multiusing +IBM Install Bigger Memory +IBM Institution By Machiavelli +IBM Insultingly Boring Merchandisers +IBM Intellectuals Being Moronized +IBM Intelligence Belittling Meaning +IBM Intimidated, Buffaloed Management +IBM Into Building Money +IBM Intolerant of Beards & Moustaches +IBM Invest Before Multi-tasking +IBM Investigate Baffling Malodor +IBM Irresponsible Behave Multinational +IBM It Beats Mattel +IBM It's a Big Mess +IBM It's Better Manually +IBM Itty Bitty Machine +IBM Institute for Black Magic +100,000 lemmings can't be wrong. +Murphy's Eighth Law: If everything seems to be going well, you have obviously overlooked something. +Rules of the game: Do not believe in miracles - rely on them. +Rules of the game: Any given program, once running, is obsolete. +Computing Definition - Error: What someone else has made when they disagree with your computer output. +Backup not found: (A)bort (R)etry (P)anic +WinErr 653: Multitasking attempted - system confused. +Cannot join #real_life (invite only) +"Unfortunatly, no one can be told what the Matrix is. You have to see it for yourself." - Matrix +"Reality is a thing of the past" - Matrix +"The future will not be user friendly" - Matrix +"The general idea in chat is to make yourself understandable... ..." - Peer +"heh i am talkin to someone...she not dead...yet anyways" - Stinky diff --git a/conf/inspire.rules.example b/conf/inspire.rules.example new file mode 100644 index 000000000..e51f0afd9 --- /dev/null +++ b/conf/inspire.rules.example @@ -0,0 +1,3 @@ +This is the InspIRCd rules file. + +Place any network or server rules here :) |