diff options
Diffstat (limited to 'conf/modules.conf.example')
| -rw-r--r-- | conf/modules.conf.example | 1849 |
1 files changed, 0 insertions, 1849 deletions
diff --git a/conf/modules.conf.example b/conf/modules.conf.example deleted file mode 100644 index cc8620e89..000000000 --- a/conf/modules.conf.example +++ /dev/null @@ -1,1849 +0,0 @@ -#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# These tags define which modules will be loaded on startup by your # -# server. Add modules without any paths. When you make your ircd # -# using the 'make' command, all compiled modules will be moved into # -# the folder you specified when you ran ./configure. The module tag # -# automatically looks for modules in this location. # -# If you attempt to load a module outside of this location, either # -# in the config, or via /LOADMODULE, you will receive an error. # -# # -# By default, ALL modules are commented out. You must uncomment them # -# or add lines to your config to load modules. Please refer to # -# http://wiki.inspircd.org/Modules for a list of modules and # -# each modules link for any additional conf tags they require. # -# # -# You may use wildcards in a <module> tag to load all modules which # -# match a glob pattern (e.g. m_sa????.so would load m_sajoin, # -# m_sapart, m_saquit and m_sanick) # -# # -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# To link servers to InspIRCd, you MUST load the m_spanningtree # -# module. Since several features (like SSL server links) rely on # -# other modules being loaded before m_spanningtree, the module itself # -# is at the bottom of this file. DO NOT forget to load it. If you DO # -# NOT do this, server links will NOT work at all. ie. The ports will # -# NOT bind, and /connect will not work properly. This is by design, # -# to allow for the implementation of other linking protocols in # -# modules in the future. # -# # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# MD5 Module - Allows other modules to generate MD5 hashes, usually for -# cryptographic uses and security. -# -# IMPORTANT: -# Other modules such as m_cloaking.so and m_password_hash.so may rely on -# this module being loaded to function. -# -#<module name="m_md5.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SHA256 Module - Allows other modules to generate SHA256 hashes, -# usually for cryptographic uses and security. -# -# IMPORTANT: -# Other modules such as m_password_hash.so may rely on this module being -# loaded to function. Certain modules such as m_spanningtree.so will -# function without this module but when it is loaded their features will -# be enhanced (for example the addition of HMAC authentication). -# -#<module name="m_sha256.so"> -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes, -# usually for cryptographic uses and security. -# -# IMPORTANT: -# Other modules may rely on this module being loaded to function. -#<module name="m_ripemd160.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Abbreviation module: Provides the ability to abbreviate commands a-la -# BBC BASIC keywords. -#<module name="m_abbreviation.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Alias module: Allows you to define server-side command aliases -#<module name="m_alias.so"> -# -# Fantasy settings: -# -#<fantasy prefix="!" allowbots="no"> -# -# prefix: -# Set the prefix for in-channel aliases (fantasy commands) to the -# specified character. If not set, the default is "!". -# allowbots: -# If this is set to no, +B clients will not be able to use fantasy -# commands. If not set, the default is no. -# -#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_alias.so module loaded, you may also define # -# aliases as shown below. They are commonly used to provide shortcut # -# commands to services, however they are not limited to just this use.# -# An alias tag requires the following values to be defined in it: # -# # -# text - The text to detect as the actual command line, # -# Cant contain spaces, but case insensitive. # -# You may have multiple aliases with the same # -# command name (text="" value), however the first # -# found will be executed if its format value is # -# matched, or it has no format value. Aliases are # -# read from the top of the file to the bottom. # -# # -# usercommand - If this is true, the alias can be run simply as # -# /aliasname. Defaults to true. # -# # -# channelcommand - If this is true, the alias can be used as an # -# in-channel alias or 'fantasy command', prefixed # -# by the fantasy prefix character, !aliasname by # -# default. Defaults to false. # -# # -# format - If this is defined, the parameters of the alias # -# must match this glob pattern. For example if you # -# want the first parameter to start with a # for # -# the alias to be executed, set format="#*" in the # -# alias definition. Note that the :'s which are # -# part of IRC formatted lines will be preserved # -# for matching of this text. This value is # -# optional. # -# # -# replace - The text to replace 'text' with. Usually this # -# will be "PRIVMSG ServiceName :$2-" or similar. # -# You may use the variables $1 through $9 in the # -# replace string, which refer to the first through # -# ninth word in the original string typed by the # -# user. You may also use $1- through $9- which # -# refer to the first word onwards, through to the # -# ninth word onwards, e.g. if the user types the # -# command "foo bar baz qux quz" then $3- will hold # -# "baz qux quz" and $2 will contain "bar". You may # -# also use the special variables: $nick, $ident, # -# $host and $vhost, and you may separate multiple # -# commands with a newline (which can be written in # -# the file literally, or encoded as &nl; or \n # -# depending on the config format setting). # -# # -# requires - If you provide a value for 'requires' this means # -# the given nickname MUST be online for the alias # -# to successfully trigger. If they are not, then # -# the user receives a 'no such nick' 401 numeric. # -# # -# uline - Defining this value with 'yes', 'true' or '1' # -# will ensure that the user given in 'requires' # -# must also be on a u-lined server, as well as # -# actually being on the network. If the user is # -# online, but not on a u-lined server, then an # -# oper-alert is sent out as this is possibly signs # -# of a user trying to impersonate a service. # -# # -# operonly - Defining this value, with a value of 'yes', '1' # -# or true will make the alias oper only. If a non- # -# oper attempts to use the alias, it will appear # -# to not exist. # -# # -#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes"> -#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes"> -#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes"> -#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes"> -#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes"> -#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes"> -#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes"> -#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes"> -#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes"> -#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes"> -#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes"> -#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes"> -# -# An example of using the format value to create an alias with two -# different behaviours depending on the format of the parameters. -# -#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3" -# requires="ChanServ" uline="yes"> -# -#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2" -# requires="NickServ" uline="yes"> -# -# This alias fixes a glitch in xchat 2.6.x and above and the way it -# assumes IDENTIFY must be prefixed by a colon (:) character. It should -# be placed ABOVE the default NICKSERV alias (the first example) listed -# above. -# -#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-" -# requires="NickServ" uline="yes"> -# -# You may also add aliases to trigger based on something said in a -# channel, aka 'fantasy' commands, configured in the same manner as any -# other alias, with usercommand="no" and channelcommand="yes" The -# command must be preceded by the fantasy prefix when used. -# -#<alias text="CS" usercommand="no" channelcommand="yes" -# replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes"> -# -# This would be used as "!cs <command> <options>", with the channel -# being automatically inserted after the command in the message to -# ChanServ, assuming the fantasy prefix is "!". - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Allowinvite module: Gives channel mode +A to allow all users to use -# /invite, and extban A to deny invite from specific masks -#<module name="m_allowinvite.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Alltime module: Shows time on all connected servers at once. -# This module is oper-only and provides /alltime. -# To use, ALLTIME must be in one of your oper class blocks. -#<module name="m_alltime.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Antibear security module: Prevents 'bear.txt' based trojans from -# connecting to your network by sending them a numeric they can't handle. -#<module name="m_antibear.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Antibottler module: Labels bottler leech bots -#<module name="m_antibottler.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Auditorium module: Adds channel mode +u which makes everyone else -# except you in the channel invisible, used for large meetings etc. -#<module name="m_auditorium.so"> -# -# Auditorium settings: -# -#<auditorium showops="no" operoverride="no"> -# -# showops: -# Setting this value to yes makes m_auditorium behave like unrealircd -# +u channel mode, e.g. ops see users joining, parting, etc, and users -# joining the channel see the ops. Without this flag, the mode acts -# like ircnet's +a (anonymous channels), showing only the user in the -# names list, and not even showing the ops in the list, or showing the -# ops that the user has joined. -# operoverride: -# Setting this value to yes makes m_auditorium affect the userlist for -# regular users only. Opers will view all users in the channel normally. - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Autoop module: Adds basic channel access controls via the +w listmode. -# For example, +w o:R:Brain will op anyone identified to the account "Brain" -# on join. -#<module name="m_autoop.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ban except module: Adds support for channel ban exceptions (+e) -#<module name="m_banexception.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ban redirection module: Allows bans which redirect to a specified -# channel. e.g. +b nick!ident@host#channelbanneduserissentto -#<module name="m_banredirect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block amsg module: Attempt to block all usage of /amsg and /ame -#<module name="m_blockamsg.so"> -# -#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_blockamsg.so module loaded, you can configure it # -# with the <blockamsg> tag: # -# # -# delay - How many seconds between two messages to force # -# them to be recognised as unrelated. # -# action - Any of 'notice', 'noticeopers', 'silent', 'kill' # -# or 'killopers'. Define how to take action when # -# a user uses /amsg or /ame. # -# -#<blockamsg delay="3" action="killopers"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block CAPS module: Blocking all-CAPS messages with cmode +B -#<module name="m_blockcaps.so"> -# # -#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# percent - How many percent of text must be caps before text # -# will be blocked. # -# # -# minlen - The minimum length a line must be for the block # -# percent to have any effect. # -# # -# capsmap - A list of chars to be considered CAPS, this was # -# you can add CAPS for your language. Also you can # -# add things like ! and space to further lock down # -# on caps usage. # -#<blockcaps percent="50" -# minlen="5" -# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! "> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block colour module: Blocking colour-coded messages with cmode +c -#<module name="m_blockcolor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Botmode module: Adds the user mode +B -#<module name="m_botmode.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CallerID module: Adds usermode +g which activates hybrid-style -# callerid (== block all private messages unless you /accept first) -#<module name="m_callerid.so"> -# -#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# maxaccepts - Maximum number of entires a user can add to his # -# /accept list. Default is 16 entries. # -# operoverride - Can opers (note: ALL opers) ignore callerid mode? # -# Default is no. # -# tracknick - Preserve /accept entries when a user changes nick? # -# If no (the default), the user is removed from # -# everyone's accept list if he changes nickname. # -# cooldown - Amount of time (in seconds) that must pass since # -# the last notification sent to a user before he can # -# be sent another. Default is 60 (1 minute). # -#<callerid maxaccepts="16" -# operoverride="no" -# tracknick="no" -# cooldown="60"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CAP module: Provides the CAP negotiation mechanism seen in -# ratbox-derived ircds -#<module name="m_cap.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CBAN module: Lets you disallow channels from being used at runtime. -# This module is oper-only and provides /cban. -# To use, CBAN must be in one of your oper class blocks. -#<module name="m_cban.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Censor module: Adds the channel mode +G -#<module name="m_censor.so"> -# -#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_censor module, then you must # -# specify some censor tags. See also: # -# http://wiki.inspircd.org/Modules/censor # -# -#<include file="censor.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CGI:IRC module: Adds support for automatic host changing in CGI:IRC -# (http://cgiirc.sourceforge.net). -#<module name="m_cgiirc.so"> -# -#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# -# -# Optional - If you specify to use m_cgiirc, then you must specify one -# or more cgihost tags which indicate authorised CGI:IRC servers which -# will be connecting to your network, and an optional cgiirc tag. -# For more information see: http://wiki.inspircd.org/Modules/cgiirc -# -# Set to yes if you want to notice opers when CGI clients connect -# <cgiirc opernotice="no"> -# -# The type field indicates where the module should get the real -# client's IP address from, for further information, please see the -# CGI:IRC documentation. -# -# Old style: -# <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS -# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident -# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs -# New style: -# <cgihost type="webirc" password="foobar" -# mask="somebox.mysite.com"> # Get IP from WEBIRC -# -# IMPORTANT NOTE: -# --------------- -# -# When you connect CGI:IRC clients, there are two connect classes which -# apply to these clients. When the client initially connects, the connect -# class which matches the cgi:irc site's host is checked. Therefore you -# must raise the maximum local/global clients for this ip as high as you -# want to allow cgi clients. After the client has connected and is -# determined to be a cgi:irc client, the class which matches the client's -# real IP is then checked. You may set this class to a lower value, so that -# the real IP of the client can still be restricted to, for example, 3 -# sessions maximum. -# - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel create module: Adds snomask +j, which will notify opers of -# any new channels that are created. -# This module is oper-only. -#<module name="m_chancreate.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel filter module: Allows channel-op defined message -# filtering using simple string matches (channel mode +g) -#<module name="m_chanfilter.so"> -# -# If hidemask is set to yes, the user will not be shown the mask when -# his/her message is blocked. -#<chanfilter hidemask="yes"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel History module: Displays the last 'X' lines of chat to a user -# joining a channel with +H 'X:T' set; 'T' is the maximum time to keep -# lines in the history buffer. Designed so that the new user knows what -# the current topic of conversation is when joining the channel. -# NOTE: Currently hard-limited to a maximum of 50 lines. -#<module name="m_chanhistory.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel logging module: used to send snotice output to channels, to -# allow staff to centrally monitor and discuss network activity. -# -# The "channel" field is where you want the messages to go, "snomasks" -# is what snomasks you want to be sent to that channel. Multiple tags -# are allowed. -#<module name="m_chanlog.so"> -#<chanlog snomasks="AOcC" channel="#opers"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel Names module: Allows disabling channels which have certain -# characters in the channel name such as bold, colourcodes, etc which -# can be quite annoying and allow users to on occasion have a channel -# that looks like the name of another channel on the network. -#<module name="m_channames.so"> - -<channames - # denyrange: characters or range of characters to deny in channel - # names. - denyrange="2,3" - - # allowrange: characters or range of characters to specifically allow - # in channel names. - allowrange=""> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channelban: Implements extended ban j:, which stops anyone in already -# in a channel matching a mask like +b j:#channel*mask from joining. -#<module name="m_channelban.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Chanprotect module: gives +q and +a channel modes -#<module name="m_chanprotect.so"> - -<chanprotect - # noservices: With this set to yes, when a user joins a empty channel, - # the server will set +q on them. If set to no, it will only set +o - # on them until they register the channel. - noservices="no" - - # qprefix: Prefix (symbol) to use for +q users. - qprefix="~" - - # aprefix: Prefix (symbol) to use for +a users. - aprefix="&" - - # deprotectself: If this value is set (true, yes or 1), it will allow - # +a and +q users to remove the +a and +q from themselves, otherwise, - # the status will have to be removed by services. - deprotectself="yes" - - # deprotectothers: If this value is set to yes, true, or 1, then any - # user with +q or +a may remove the +q or +a from other users. - deprotectothers="yes"> - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Check module: gives /check -# Check is useful for looking up information on channels, -# users, IP addresses and hosts. -# This module is oper-only. -# To use, CHECK must be in one of your oper class blocks. -#<module name="m_check.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGHOST module: Adds the /CHGHOST command -# This module is oper-only. -# To use, CHGHOST must be in one of your oper class blocks. -# NOTE: Services will not be able to set vhosts on users if this module -# isn't loaded. If you're planning on running services, you probably -# want to load this. -#<module name="m_chghost.so"> -# -#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-# -# Optional - If you want to use special chars for hostnames you can # -# specify your own custom list of chars with the <hostname> tag: # -# # -# charmap - A list of chars accepted as valid by the /CHGHOST # -# and /SETHOST commands. Also note that the list is # -# case-sensitive. # -#<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGIDENT module: Adds the /CHGIDENT command -# This module is oper-only. -# To use, CHGIDENT must be in one of your oper class blocks. -#<module name="m_chgident.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGNAME module: Adds the /CHGNAME command -# This module is oper-only. -# To use, CHGNAME must be in one of your oper class blocks. -#<module name="m_chgname.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Cloaking module: Adds usermode +x and cloaking support. -# Relies on the module m_md5.so being loaded before m_cloaking.so in -# the configuration file. -# To use, you should enable m_conn_umodes and add +x as -# an enabled mode. See the m_conn_umodes module for more information. -#<module name="m_cloaking.so"> -# -#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# If you specify the m_cloaking.so module as above, you must define # -# cloak keys, and optionally a cloak prefix as shown below. The cloak # -# keys must be shared across the network for correct cloaking. # -# # -# There are four methods of cloaking: # -# # -# half Cloak only the "unique" portion of a host; show # -# the last 2 parts of the domain, /16 subnet of IPv4 # -# or /48 subnet of the IPv6 address. # -# # -# full Cloak the users completely, using three slices for # -# common CIDR bans (IPv4: /16, /24; IPv6: /48, /64) # -# # -# These methods use a single key that can be any length of text. # -# An optional prefix may be specified to mark cloaked hosts. # -# # -# The following methods are maintained for backwards compatibility; # -# they are slightly less secure, and always hide unresolved IPs # -# # -# compat-host InspIRCd 1.2-compatible host-based cloaking # -# compat-ip InspIRCd 1.2-compatible ip-always cloaking # -# # -# You must specify key1, key2, key3, key4 for the compat cloaking # -# modes; the values must be less than 0x80000000 and should be picked # -# at random. Prefix is mandatory, will default to network name if not # -# specified, and will always have a "-" appended. # -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# -#<cloak mode="half" -# key="secret" -# prefix="net-"> - -#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Close module: Allows an oper to close all unregistered connections. -# This module is oper-only and provides /close. -# To use, CLOSE must be in one of your oper class blocks. -#<module name="m_close.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Clones module: Adds an oper command /CLONES for detecting cloned -# users. Warning: This module may be resource intensive when its -# command is issued, use with care. -# This module is oper-only. -# To use, CLONES must be in one of your oper class blocks. -#<module name="m_clones.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Common channels module: Adds user mode +c, which, when set, requires -# that users must share a common channel with you to PRIVMSG or NOTICE -# you. -#<module name="m_commonchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Join: Allows you to force users to join one or more channels -# automatically upon connecting to the server. -#<module name="m_conn_join.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# -# If you have m_conn_join.so loaded, you can configure it using the -# follow values: -# -#<autojoin channel="#one,#two,#three"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Usermodes: Set modes on users when they connect -# When this module is loaded <connect:allow> tags may have an optional -# modes="" value, which contains modes to add or remove from users -# when they connect to the server. -#<module name="m_conn_umodes.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Wait-for-Pong: Don't let a user connect until they PONG -#<module name="m_conn_waitpong.so"> -# -#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_conn_waitpong.so module loaded, configure it with # -# the <waitpong> tag: # -# # -# sendsnotice - Whether to send a snotice on connect, like other # -# older ircds # -# # -# killonbadreply - Whether to kill the user if they send the wrong # -# PONG reply. # -# # -#<waitpong sendsnotice="yes" killonbadreply="yes"> - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Channel cycle module. Server side /hop, with +ilk etc bypass. -#<module name="m_cycle.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Connectban: Provides IP connection throttling. Any IP range that connects -# too many times (configurable) in an hour is zlined for a (configurable) -# duration, and their count resets to 0. -# -# ipv4cidr and ipv6cidr allow you to turn the comparison from individual -# IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling -# over whole ISPs/blocks of IPs, which may be needed to prevent attacks. -# -#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128"> -# This allows for 10 connections in an hour with a 10 minute ban if that is exceeded. -# -#<module name="m_connectban.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Connection throttle module. Configuration: -#<module name="m_connflood.so"> -# -#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# seconds, maxconns - Amount of connections per <seconds>. -# -# timeout - Time to wait after the throttle was activated -# before deactivating it. Be aware that the time -# is seconds + timeout. -# -# quitmsg - The message that users get if they attempt to -# connect while the throttle is active. -# -# bootwait - Amount of time to wait before enforcing the -# throttling when the server just booted. -# -#<connflood seconds="30" maxconns="3" timeout="30" -# quitmsg="Throttled" bootwait="10"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Custom title module: Adds the /TITLE command which allows for trusted -# users to gain a custom whois line and a optional -# vhost can be specified. -#<module name="m_customtitle.so"> -# -#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# name - The username used to identify -# password - The password used to identify -# hash - The hash for the specific user's password (optional) -# m_password_hash.so and a hashing module must be loaded for this to work -# host - Allowed hostmask [optional] -# title - Title shown in whois -# vhost - Displayed host [optional] -# -#<title name="foo" password="bar" title="Official Chat Helper"> -#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat"> -#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# DCCALLOW module: Adds the /DCCALLOW command -#<module name="m_dccallow.so"> -# -#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# blockchat - Whether to block DCC CHAT as well as DCC SEND -# length - Default duration of entries in DCCALLOW list -# action - Default action to take if no action is specified -# can be 'block' or 'allow' -# -# File configuration: -# pattern - The glob pattern to match against -# action - Action to take if a user attempts to send a file -# that matches this pattern, can be 'block' or 'allow' -# -#<dccallow blockchat="yes" length="5m" action="block"> -#<banfile pattern="*.exe" action="block"> -#<banfile pattern="*.txt" action="allow"> -# -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Deaf module: adds support for ircu style usermode +d - deaf to -# channel messages and channel notices. -#<module name="m_deaf.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Delay join module: Adds the channel mode +D which delays all JOIN -# messages from users until they speak. If they quit or part before -# speaking, their quit or part message will not be shown to the channel -# which helps cut down noise on large channels in a more friendly way -# than the auditorium mode. Only channel ops may set the +D mode. -#<module name="m_delayjoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Delay message module: Adds the channel mode +d which disallows a user -# from talking in the channel unless they've been joined for X seconds. -# Settable a la: /mode +d 30 -#<module name="m_delaymsg.so> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Deny Channels: Deny Channels from being used by users -#<module name="m_denychans.so"> -# -#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-# -# # -# If you have the m_denychans.so module loaded, you need to specify # -# the channels to deny: # -# # -# name - The channel name to deny. (glob masks are ok) # -# # -# allowopers - If operators are allowed to override the deny. # -# # -# reason - Reason given for the deny. # -# # -# redirect - Redirect the user to a different channel # -# # -#<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> # -#<badchan name="#heaven" redirect="#hell" reason="Nice try!"> # -# # -# Redirects will not work if the target channel is set +L. # -# # -# Additionally, you may specify channels which are allowed, even if # -# a badchan tag specifies it would be denied: # -#<goodchan name="#godsleeps"> # -# Glob masks are accepted here also. - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Devoice Module: Let users devoice themselves. -#<module name="m_devoice.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# DNS Blacklist Module: Provides support for looking up IPs on one or # -# more blacklists. # -#<module name="m_dnsbl.so"> # -# # -# For configuration options please see the wiki page for m_dnsbl at # -# http://wiki.inspircd.org/Modules/dnsbl # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Exempt Channel Operators Module: Provides support for allowing # -# channel operators to be exempt from some channel modes. Supported # -# modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, # -# filter, regmoderated, nonick, nonotice, and stripcolor. # -#<module name="m_exemptchanops.so"> # -# # -#-#-#-#-#-#-#-#-#-#- EXEMPTCHANOPS CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# alwaysexempt - Modes channel operators are always exempt from, -# regardless of channel setting. -# neverexempt - Modes channel operators are never exempt from, -# regardless of channel setting. -#<exemptchanops alwaysexempt="nickflood censor flood filter" neverexempt="regmoderated"> - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Filter module: Provides message filtering, similar to SPAMFILTER. -#<module name="m_filter.so"> -# # -# This module depends upon a regex provider such as m_regex_pcre or # -# m_regex_glob to function. You must specify which of these you want # -# m_filter to use via the tag below. # -# # -# Valid engines are: # -# # -# glob - Glob patterns, provided via m_regex_glob.so # -# pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre # -# tre - TRE regexps, provided via m_regex_tre.so, requires libtre # -# posix - POSIX regexps, provided via m_regex_posix.so, not availale # -# on windows, no dependencies on other operating systems. # -# # -#<filteropts engine="glob"> # -# # -# Your choice of regex engine must match on all servers network-wide. -# -# You may specify specific channels that are exempt from being filtered: -#<exemptfromfilter channel="#blah"> -# -#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_filter module, then # -# specfiy below the path to the filter.conf file, or define some # -# <filter> tags. # -# # -#<include file="filter.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Gecosban: Implements extended ban r:, which stops anyone matching -# a mask like +b r:*realname?here* from joining a channel. -#<module name="m_gecosban.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# GeoIP module: Allows the server admin to ban users by country code. -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp -# and run make install, then uncomment this module to enable it. -# This module requires GeoIP to be installed on your system, -# use your package manager to find the appropriate packages -# or check the InspIRCd wiki page for this module. -#<module name="m_geoip.so"> -# -#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# -# # -# <geoip banunknown="false"> # -# # -# Set this value to true or yes to block unknown IP ranges which are # -# not in the database (usually LAN addresses, localhost, etc) # -# # -# <geoban country="TR" reason="This country not permitted"> # -# # -# Use one or more of these tags to ban countries by country code. # -# The country code must be in capitals and should be an ISO country # -# code such as TR, GB, or US. # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Globops module: gives /GLOBOPS and SNOMASK +g -# This module is oper-only. -# To use, GLOBOPS must be in one of your oper class blocks. -#<module name="m_globops.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Global load module: Allows loading and unloading of modules network- -# wide (USE WITH EXTREME CAUTION!) -# This module is oper-only and provides /gloadmodule, /gunloadmodule -# and /greloadmodule. -# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE -# must be in one of your oper class blocks. -#<module name="m_globalload.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Halfop module: Provides the +h (halfops) channel status mode. -#<module name="m_halfop.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HELPOP module: Provides the /HELPOP command -#<module name="m_helpop.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_helpop.so module, then # -# specify below the path to the helpop.conf file, or if you like to # -# make a mess, define your helpop tags in this conf. # -# # -#<include file="helpop.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HIDECHANS module: Allows opers to hide their channels list from non- -# opers by setting user mode +I on themselves. -# <module name="m_hidechans.so"> -# -# HIDECHANS can optionally prevent opers from seeing channels on a +I -# user, for more privacy if set to true. -# This setting is not recommended for most mainstream networks. -#<hidechans affectsopers="false"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HIDEOPER module: Allows opers to hide their oper status from non- -# opers by setting user mode +H on themselves. -# This module is oper-only. -# <module name="m_hideoper.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Hostchange module: Allows a different style of cloaking -#<module name="m_hostchange.so"> -# -#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you choose to use the m_hostchange.so module. # -# Config Help - See http://wiki.inspircd.org/Modules/hostchange # -# # -#<host suffix="polarbears.org" separator="." prefix=""> -#<hostchange mask="*@fbi.gov" action="addnick"> -#<hostchange mask="*r00t@*" action="suffix"> -#<hostchange mask="a@b.com" action="set" value="blah.blah.blah"> -#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# httpd module: Provides http server support for InspIRCd -#<module name="m_httpd.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# -# If you choose to use the m_httpd.so module, then you will need to add -# a <bind> tag with type "httpd", and load at least one of the other -# m_httpd_* modules to provide pages to display. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# http ACL module: Provides access control lists for m_httpd dependent -# modules. Use this module to restrict pages by IP address and by -# password. -# -#<module name="m_httpd_acl.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# -# Restrict access to the m_httpd_stats module to all but the local -# network and when the correct password is specified: -# -# <httpdacl path="/stats*" types="password,whitelist" -# username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*"> -# -# Deny all connections to all but the main index page: -# -# <httpdacl path="/*" types="blacklist" blacklist="*"> -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# http config module: Allows the server's configuration to be viewed -# over HTTP. Requires m_httpd.so to be loaded for it to function. -#<module name="m_httpd_config.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# http stats module: Provides basic stats pages over HTTP -# Requires m_httpd.so to be loaded for it to function. -#<module name="m_httpd_stats.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ident: Provides RFC 1413 ident lookup support -# When this module is loaded <connect:allow> tags may have an optional -# useident="yes|no" boolean value, determining whether or not to lookup -# ident on users matching that connect tag. -#<module name="m_ident.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you are using the m_ident.so module, then you can # -# specify the timeout for ident lookups here. If not defined, it will # -# default to one second. This is a non-blocking timeout which holds # -# the user in a 'connecting' state until the lookup is complete. # -# The bind value indicates which IP to bind outbound requests to. # -# # -#<ident timeout="5"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Invite except module: Adds support for channel invite exceptions (+I) -#<module name="m_inviteexception.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Invisible module - Adds support for usermode +Q (quiet) which lets an -# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that -# opers are still able to see invisible users, and if an oper with +Q -# deopers, they will become visible. -# -# This module is oper-only and seen by many to be quite abusive. -# -#<module name="m_invisible.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Join flood module: Adds support for join flood protection (+j) -#<module name="m_joinflood.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Jump Server module: Adds support for the RPL_REDIR numeric -# This module is oper-only. -# To use, JUMPSERVER must be in one of your oper class blocks. -#<module name="m_jumpserver.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J) -#<module name="m_kicknorejoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Knock module: adds the /KNOCK command and +K channel mode -#<module name="m_knock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# LDAP authentication module: Adds the ability to authenticate users # -# via LDAP. This is an extra module which must be enabled explicitly # -# by symlinking it from modules/extra, and requires the OpenLDAP libs # -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_ldapauth.cpp -# and run make install, then uncomment this module to enable it. # -# # -#<module name="m_ldapauth.so"> # -# # -# Configuration: # -# # -# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" # -# attribute="uid" # -# server="ldap://brainwave.brainbox.cc" # -# allowpattern="Guest*" # -# killreason="Access denied" # -# searchscope="subtree" # -# binddn="cn=Manager,dc=brainbox,dc=cc" # -# bindauth="mysecretpass" # -# verbose="yes"> # -# # -# The baserdn indicates the base DN to search in for users. Usually # -# this is 'ou=People,dc=yourdomain,dc=yourtld'. # -# # -# The attribute value indicates the attribute which is used to locate # -# a user account by name. On POSIX systems this is usually 'uid'. # -# # -# The server parameter indicates the LDAP server to connect to. The # -# ldap:// style scheme before the hostname proper is MANDITORY. # -# # -# The allowpattern value allows you to specify a wildcard mask which # -# will always be allowed to connect regardless of if they have an # -# account, for example guest users. # -# # -# Killreason indicates the QUIT reason to give to users if they fail # -# to authenticate. # -# # -# The searchscope value indicates the subtree to search under. On our # -# test system this is 'subtree'. Your mileage may vary. # -# # -# Setting the verbose value causes an oper notice to be sent out for # -# every failed authentication to the server, with an error string. # -# # -# The binddn and bindauth indicate the DN to bind to for searching, # -# and the password for the distinguished name. Some LDAP servers will # -# allow anonymous searching in which case these two values do not # -# need defining, otherwise they should be set similar to the examples # -# above. # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# LDAP oper configuration module: Adds the ability to authenticate # -# opers via LDAP. This is an extra module which must be enabled # -# explicitly by symlinking it from modules/extra, and requires the # -# OpenLDAP libs. Re-run configure with: ./configure --enable-extras=m_ldapoper.cpp -# and run make install, then uncomment this module to enable it. # -# # -#<module name="m_ldapoper.so"> -# # -# Configuration: # -# # -# <ldapoper baserdn="ou=People,dc=brainbox,dc=cc" -# server="ldap://brainwave.brainbox.cc" -# searchscope="subtree" -# binddn="cn=Manager,dc=brainbox,dc=cc" -# bindauth="mysecretpass"> -# # -# Available configuration items are identical to the same items in # -# m_ldapauth above. # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is # -# used to temporarily close/open for new connections to the server. # -# These commands require OPER status and that the LOCKSERV UNLOCKSERV # -# are specified in a <class> tag that the oper is part of. This is so # -# you can control who has access to this possible dangerous command. # -# If your server is locked and you got disconnected, do a REHASH from # -# shell to open up again. -# -# This module is oper-only. -# -#<module name="m_lockserv.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Map hiding module: replaces /MAP and /LINKS output to users with a # -# message to see a website, set by maphide="http://link.to/site" in # -# the security tag, instead. # -#<module name="m_maphide.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Msg flood module: Adds message/notice flood protection (+f) -#<module name="m_messageflood.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# MsSQL module: Allows other SQL modules to access MS SQL Server -# through a unified API. You must copy the source for this module -# from the directory src/modules/extra, plus the file m_sqlv2.h -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mssql.cpp -# and run make install, then uncomment this module to enable it. -# -#<module name="m_mssql.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_mssql.so is more complex than described here, see wiki for more # -# info http://wiki.inspircd.org/Modules/mssql # -# -#<database name="db" username="user" password="pass" hostname="localhost" id="db1"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# MySQL module: Allows other SQL modules to access MySQL databases -# through a unified API. You must copy the source for this module -# from the directory src/modules/extra, plus the file m_sqlv2.h -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mysql.cpp -# and run make install, then uncomment this module to enable it. -# -#<module name="m_mysql.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_mysql.so is more complex than described here, see the wiki for # -# more: http://wiki.inspircd.org/Modules/mysql # -# -#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Named Modes module: This module allows for the display and set/unset -# of channel settings and modes via long-form mode names in channels with -# channelmode +Z set. For example, to set a channelban with named modes: -# /mode #channel +Z ban=foo!bar@baz . Currently this doesn't serve much -# purpose outside of making channel administration a bit easier in some -# cases, but eventually modules will start using named modes only because -# we're running out of channelmodes. :D -#<module name="m_namedmodes.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# NAMESX module: Provides support for the NAMESX extension which allows -# clients to see all the prefixes set on a user without getting confused. -# This is supported by mIRC, x-chat, klient, and maybe more. -#<module name="m_namesx.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# National characters module: -# 1) Allows using national characters in nicknames. -# 2) Allows using custom (national) casemapping over the network. -# file -- filename of existing file in "locales" directory -# casemapping -- custom value for 005 numeric (if you want it to be -# different from the filename. -# -#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink"> -#<module name="m_nationalchars.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Nickchange flood protection module: Allows up to X nick changes in Y seconds. -# Provides channel mode +F. -#<module name="m_nickflood.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Nicklock module: Let opers change a user's nick and then stop that -# user from changing their nick again. -# This module is oper-only. -# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks. -#<module name="m_nicklock.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No ctcp module: Adds the channel mode +C to block CTCPs and extban C -# to block CTCPs sent by specific users. -#<module name="m_noctcp.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No kicks module: Adds the +Q channel mode and the Q: extban to deny -# certain users from kicking. -#<module name="m_nokicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No nicks module: Adds the +N channel mode, as well as the +b N: -# extended bantype. +N stops all users from changing their nick, -# the +b N: extban stops anyone from matching a +b N:nick!user@host -# mask from changing their nick. -#<module name="m_nonicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No part message module: adds extban 'p' to block part messages from # -# matching users. # -#<module name="m_nopartmsg.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No Notice module: adds the channel mode +T and the extban T to block -# specific users from noticing the channel. -#<module name="m_nonotice.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Network buisness join module -# Allows an oper to join a channel using /OJOIN, giving them +Y on the -# channel which makes them immune to kick/deop/etc. -#<module name="m_ojoin.so"> -# -#<ojoin prefix="!" notice="yes" op="yes"> -# Specify the prefix that +Y will grant here -# Leave prefix empty if you do not wish +Y to grant a prefix -# If notice is set to on, upon ojoin, the server will notice -# the channel saying that the oper is joining on network business -# If op is set to on, it will give them +o along with +Y - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper channels mode: Adds the +O channel mode and +beI type O:<mask> -# to ban, exempt, and invex given oper type masks. -# e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you -# may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins. -# +be work in a similar fashion. -# -#<module name="m_operchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper Join module: Auto-joins opers to a channel upon oper-up -# This module is oper-only. For the user equivalent, see m_conn_join. -#<module name="m_operjoin.so"> -# -#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you are using the m_operjoin.so module, specify options here: # -# # -# channel - The channel name to join, can also be a comma # -# seperated list eg. "#channel1,#channel2". # -# # -# override - Lets the oper join walking thru any modes that # -# might be set, even bans. Use "yes" or "no". # -# # -#<operjoin channel="#channel" override="no"> -# -# Alternatively you can use the autojoin="channellist" in a <type> # -# tag to set specific autojoins for a type of oper, for example: # -# -#<type name="Helper" autojoin="#help" classes="..."> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper log module: Logs all oper commands to the ircd log at default -# loglevel. -# This module is oper-only. -#<module name="m_operlog.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper prefixing module: Gives IRC operators a prefix status character -# on all channels they are in. -# -#<module name="m_operprefix.so"> -# -# You may additionally customise the prefix character. -#<operprefix prefix="!"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper MOTD module: Provides support for seperate message of the day -# on oper-up -# This module is oper-only. -#<module name="m_opermotd.so"> -# -#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# If you are using the m_opermotd.so module, specify the motd here # -# # -# onoper - Should the message be sent on /OPER or only when # -# /OPERMOTD is used. Use "yes" or "no". # -# # -#<opermotd file="oper.motd" onoper="yes"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Override module: Adds support for oper override -# This module is oper-only. -#<module name="m_override.so"> -# -#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# m_override.so is too complex it describe here, see the wiki: # -# http://wiki.inspircd.org/Modules/override # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper levels module: Gives each oper a level and prevents -# actions being taken against higher level opers -# Specify the level as the 'level' parameter of the <type> tag -# # This module is oper-only. -#<module name="m_operlevels.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper modes module: Allows you to specify modes to add/remove on oper -# Specify the modes as the 'modes' parameter of the <type> tag -# and/or as the 'modes' parameter of the <oper> tag. -# This module is oper-only. For the user equivalent, see m_conn_umodes -#<module name="m_opermodes.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper password hash module: Allows hashed oper passwords -# Relies on the module m_md5.so and/or m_sha256.so being loaded before -# m_password_hash.so in the configuration file. -# This module is oper-only. -#<module name="m_password_hash.so"> -# -#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# -# -# To use this module, you must define a hash type for each oper's -# password you want to hash. For example: -# -# <oper name="Brain" -# host="ident@dialup15.isp.com" -# hash="sha256" -# password="a41d730937a53b79f788c0ab13e9e1d5" -# type="NetAdmin"> -# -# The types of hashing available vary depending on which hashing modules -# you load, but usually if you load m_sha256.so and m_md5.so, both md5 -# and sha256 type hashing will be available (the most secure of which -# is SHA256). - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Permanent Channels module: Channels with the permanent channels mode -# will remain open even after everyone else has left the channel, and -# therefore keep things like modes, ban lists and topic. Permanent -# channels -may- need support from your Services package to function -# properly with them. This adds channel mode +P. -# This module is oper-only. -#<module name="m_permchannels.so"> -# -# If you like, m_permchannels can write a config file of permanent channels -# whenever +P is set, unset, or the topic/modes on a +P channel is changed. -# If you want to do this, set the filename below, and uncomment the include. -# -#<permchanneldb filename="conf/permchannels.conf"> -#<include file="permchannels.conf"> -# -# You may also create channels on startup by using the <permchannels> block. -#<permchannels channel="#opers" modes="is" topic="Opers only."> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# PostgreSQL module: Allows other SQL modules to access PgSQL databases -# through a unified API. You must copy the source for this module -# from the directory src/modules/extra, plus the file m_sqlv2.h -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_pgsql.cpp -# and run make install, then uncomment this module to enable it. -# -#<module name="m_pgsql.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_pgsql.so is more complex than described here, see the wiki for # -# more: http://wiki.inspircd.org/Modules/pgsql # -# -#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Muteban: Implements extended ban m:, which stops anyone matching -# a mask like +b m:nick!user@host from speaking on channel. -#<module name="m_muteban.so"> -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Random Quote module: provides a random quote on connect. -# NOTE: Some of these may mimic fatal errors and confuse users and -# opers alike! - BEWARE! -#<module name="m_randquote.so"> -# -#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# -# # -# Optional - If you specify to use the m_randquote.so module, then # -# specify below the path to the randquotes.conf file. # -# # -#<randquote file="randquotes.conf"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Redirect module: Adds channel redirection (mode +L) -#<module name="m_redirect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Regular Expression Provider for Glob or wildcard (?/*) matching. -# You must have at least 1 provider loaded to use m_filter or m_rline -# modules. This module has no additional requirements, as it uses the -# matching already present in InspIRCd core. -#<module name="m_regex_glob.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Regular Expression Provider for PCRE (Perl-Compatible Regular -# Expressions). You need libpcre installed to compile and load this -# module. You must have at least 1 provider loaded to use m_filter or -# m_rline. -#<module name="m_regex_pcre.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Regular Expression Provider for POSIX Regular Expressions. -# You shouldn't need any additional libraries on a POSIX-compatible -# system (ie: any Linux, BSD, but not Windows). You must have at least -# 1 provider loaded to use m_filter or m_rline. -# On POSIX-compliant systems, regex syntax can be found by using the -# command: 'man 7 regex'. -#<module name="m_regex_posix.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Regular Expression Provider for TRE Regular Expressions. -# This is the same regular expression engine used by UnrealIRCd, so -# if you are most familiar with the syntax of /spamfilter from there, -# this is the provider you want. You need libtre installed in order -# to compile and load this module. -#<module name="m_regex_tre.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Registered users only channel creation -# Allows only registered users and opers to create new channels. -# -# You probably *DO NOT* want to load this module on a public network. -# -#<module name="m_regonlycreate.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Remove module: Adds the /REMOVE command which is a peaceful -# alternative to /KICK -#<module name="m_remove.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restricted channels module: Allows only opers to create channels. -# -# You probably *DO NOT* want to load this module on a public network. -# -#<module name="m_restrictchans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restrict message module: Allows users to only message opers. -# -# You probably *DO NOT* want to load this module on a public network. -# -#<module name="m_restrictmsg.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Ban users through regular expression patterns -#<module name="m_rline.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# -# If you wish to re-check a user when they change nickname (can be -# useful under some situations, but *can* also use CPU with more users -# on a server) then set the following configuration value: -# Also, this is where you set what Regular Expression engine is to be -# used. If you ever change it while running, all of your R-Lines will be -# wiped. This is the regex engine used by all R-Lines set, and -# m_regex_<engine>.so must be loaded, or rline will be nonfunctional -# until you load it or change the engine to one that is loaded. -# -#<rline matchonnickchange="yes" engine="pcre"> -# -# Generally, you will NOT want to use 'glob' here, as this turns -# rline into just another gline. The exceptions are that rline will -# always use the full nick!user@host realname string, rather than only -# user@host, but beware that only the ? and * wildcards are available, -# and are the only way to specify where the space can occur if you do -# use glob. For this reason, is recommended to use a real regex engine -# so that at least \s or [[:space:]] is available. - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# JSON-RPC module: Encode and decode JSON-RPC requests for modules -#<module name="m_rpc_json.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# RPC test module: A test of the RPC API -#<module name="m_rpctest.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAJOIN module: Adds the /SAJOIN command -# This module is oper-only. -# To use, SAJOIN must be in one of your oper class blocks. -#<module name="m_sajoin.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAKICK module: Adds the /SAKICK command -# This module is oper-only. -# To use, SAKICK must be in one of your oper class blocks. -#<module name="m_sakick.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAMODE module: Adds the oper /SAMODE command -# This module is oper-only. -# To use, SAMODE must be in one of your oper class blocks. -#<module name="m_samode.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SANICK module: Allows opers to change user's nicks -# This module is oper-only. -# To use, SANICK must be in one of your oper class blocks. -#<module name="m_sanick.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAPART module: Adds the oper /SAPART command -# This module is oper-only. -# To use, SAPART must be in one of your oper class blocks. -#<module name="m_sapart.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) -# This module is oper-only. -# To use, SAQUIT must be in one of your oper class blocks. -#<module name="m_saquit.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SATOPIC module: Adds the oper /SATOPIC command -# This module is oper-only. -# To use, SATOPIC must be in one of your oper class blocks. -#<module name="m_satopic.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SASL authentication module: Provides support for IRC Authentication -# Layer (aka: atheme SASL) via AUTHENTICATE. -#<module name="m_sasl.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Secure list module: Prevent /LIST in the first minute of connection, -# crippling most spambots and trojan spreader bots. -#<module name="m_securelist.so"> -# -#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Securelist can be harmful to some irc search engines such as # -# netsplit.de and searchirc.com. To prevent securelist blocking these # -# sites from listing, define exception tags as shown below: # -<securehost exception="*@*.searchirc.org"> -<securehost exception="*@*.netsplit.de"> -<securehost exception="*@echo940.server4you.de"> -<securehost exception="*@*.ircdriven.com"> -# # -# Define the following variable to change how long a user must wait # -# before issuing a LIST. If not defined, defaults to 60 seconds. # -# # -#<securelist waittime="60"> # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Servprotect module: Provides support for Austhex style +k / -# UnrealIRCD +S services mode -#<module name="m_servprotect.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# See nicks module: Allow for SNOMASK +N which shows nick changes. -# This module is oper-only. -#<module name="m_seenicks.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Set Idle module: Adds a command for opers to change their -# idle time (mainly a toy) -# This module is oper-only. -# To use, SETIDLE must be in one of your oper class blocks. -#<module name="m_setidle.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Services support module: Adds several usermodes such as +R and +M -# this module implements the 'identified' state via account names (AC) -# and is similar in operation to the way asuka and ircu handle services. -# -# At the same time, this offers +r for users and channels to mark them -# as identified seperately from the idea of a master account, which -# can be useful for services which are heavily nick-as-account centric. -# -# This replaces m_services from 1.1 and earlier. -# -# Also of note is that this module implements two extbans: -# +b R: (stop matching account names from joining) -# +b M: (stop matching account names from speaking) -# -#<module name="m_services_account.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Sethost module: Adds the /SETHOST command -# This module is oper-only. -# To use, SETHOST must be in one of your oper class blocks. -# See m_chghost for how to customise valid chars for hostnames -#<module name="m_sethost.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Setident module: Adds the /SETIDENT command -# This module is oper-only. -# To use, SETIDENT must be in one of your oper class blocks. -#<module name="m_setident.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SETNAME module: Adds the /SETNAME command -# This module is oper-only. -# To use, SETNAME must be in one of your oper class blocks. -#<module name="m_setname.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Serverban: Implements extended ban s:, which stops anyone connected -# to a server matching a mask like +b s:server.mask.here from joining. -#<module name="m_serverban.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Show Whois module: Adds the +W usermode which allows opers -# to see when they are whois'ed (can be annoying). -# This module is oper-only. -#<module name="m_showwhois.so"> -# -# If you wish, you may also let users set this mode. Only opers with the -# users/auspex priv will see real hosts of people, though. This setting -# is not reloadable via /rehash, and will require /reloadmodule, as -# it directly affects the mode object itself. -#<showwhois opersonly="yes" -# -# You may also set whether or not users should recieve whois notices, should -# they be /whois'd by an oper. -# showfromopers="yes"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Shun module: Provides the /shun command, which stops a user executing -# most commands. -# This module is oper-only. -# To use, SHUN must be in one of your oper class blocks. -#<module name="m_shun.so"> -# -# You may also configure which commands you wish a user to be able to -# perform. It should be noted that if a shunned user issues QUIT or PART -# then their message will be removed, as if they did not issue one. -# -# You can (optionally) let the user know that their command was blocked. -# -# You may also let SHUN affect opers (defaults to no). -#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Spy module: Provides the ability to see the complete names list of -# channels an oper is not a member of -# This module is oper-only. -#<module name="m_spy.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SSL channel mode module: Adds support for SSL-only channels (+z). -# does not do anything useful without a working SSL module (see below) -#<module name="m_sslmodes.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS, -# if enabled. You must copy the source for this module from the directory -# src/modules/extra, or answer 'yes' in ./configure when asked if you -# want to enable this, or it will not load. -#<module name="m_ssl_gnutls.so"> -# -#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_ssl_gnutls.so is too complex it describe here, see the wiki: # -# http://wiki.inspircd.org/Modules/ssl_gnutls # -# # -# NOTE: If you want to use this module to encrypt and sign your # -# server to server traffic, you MUST load it before m_spanningtree in # -# your configuration file! # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SSL Info module: Allows users to retrieve information about other -# user's peer SSL certificates and keys. This can be used by client -# scripts to validate users. For this to work, one of m_ssl_gnutls.so -# or m_ssl_openssl.so must be loaded. This module also adds the -# "* <user> is using a secure connection" whois line, the ability for -# opers to use SSL fingerprints to verify their identity and the ability -# to force opers to use SSL connections in order to oper up. -# It is highly recommended to load this module especially if -# you use SSL on your network. -# For how to use the oper features, please see the first example <oper> tag -# in opers.conf.example. -# -#<module name="m_sslinfo.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL, -# if enabled. You must copy the source for this module from the directory -# src/modules/extra, or answer 'yes' in ./configure when asked if you -# want to enable this, or it will not load. -#<module name="m_ssl_openssl.so"> -# -#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_ssl_openssl.so is too complex it describe here, see the wiki: # -# http://wiki.inspircd.org/Modules/ssl_openssl # -# # -# NOTE: If you want to use this module to encrypt and sign your # -# server to server traffic, you MUST load it before m_spanningtree in # -# your configuration file! # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Strip colour module: Adds the channel mode +S -#<module name="m_stripcolor.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SILENCE module: Adds support for /SILENCE -#<module name="m_silence.so"> -# -# Configuration tags: -# -#<silence maxentries="32"> -# -# Sets the maximum number of entries on a users silence list. - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQLite3 module: Allows other SQL modules to access SQLite3 # -# databases through a unified API. You must link the source for this # -# module from the directory src/modules/extra to src/modules, plus # -# the file m_sqlv2.h # -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_aqlite.cpp -# and run make install, then uncomment this module to enable it. # -# -#<module name="m_sqlite3.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_sqlite.so is more complex than described here, see the wiki for # -# more: http://wiki.inspircd.org/Modules/sqlite3 # -# -#<database hostname="/full/path/to/database.db" id="anytext"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQLutils module: Provides some utilities to SQL client modules, such -# as mapping queries to users and channels. You must copy the source -# for this module from the directory src/modules/extra/m_sqlutils.cpp -# and src/modules/extra/m_sqlutils.h into /src/modules -# Needed for, and loaded before: SQLauth and SQLoper -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqlutils.cpp -# and run make install, then uncomment this module to enable it. -# -#<module name="m_sqlutils.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL authentication module: Allows IRCd connections to be tied into -# a database table (for example a forum). You must copy the source for -# this module from the directory src/modules/extra -# Depends on the SQLutils module being loaded first. -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqlauth.cpp -# and run make install, then uncomment this module to enable it. -# -#<module name="m_sqlauth.so"> -# -#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_sqlauth.so is too complex it describe here, see the wiki: # -# http://wiki.inspircd.org/Modules/sqlauth # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL logging module: Allows you to log network-wide data for your -# network in a fully normalised set of SQL tables. You must copy the -# source for this module from the directory src/modules/extra -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqllog.cpp -# and run make install, then uncomment this module to enable it. -# -#<module name="m_sqllog.so"> -# -#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# dbid - Database ID to use (see m_sql) # -# # -# See also: http://wiki.inspircd.org/Modules/sqllog # -# # -#<sqllog dbid="1"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL oper module: Allows you to store oper credentials in an SQL table -# You must copy the source for this module from the directory src/modules/extra -# Depends on the SQLutils module being loaded first. -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqloper.cpp -# and run make install, then uncomment this module to enable it. -# -#<module name="m_sqloper.so"> -# -#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# # -# dbid - Database ID to use (see m_sql) # -# hash - Hashing provider to use for password hashing # -# # -# See also: http://wiki.inspircd.org/Modules/sqloper # -# # -#<sqloper dbid="1" hash="md5"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be # -# added/removed by Services. # -#<module name="m_svshold.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SWHOIS module: Allows you to add arbitary lines to user WHOIS. -# This module is oper-only. -# To use, SWHOIS must be in one of your oper class blocks. -#<module name="m_swhois.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Test module: enable this to create a command useful in testing -# flood control. To avoid accidental use on live networks, the server -# name must contain ".test" to load the module -#<module name="m_testnet.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Timed bans module: Adds timed channel bans and the /TBAN command -#<module name="m_timedbans.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Test line module: Adds the /TLINE command, used to test how many -# users a /GLINE or /ZLINE etc would match. -# This module is oper-only. -# To use, TLINE must be in one of your oper class blocks. -#<module name="m_tline.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# UHNAMES support module: Adds support for the IRCX style UHNAMES -# extension, which displays ident and hostname in the names list for -# each user, saving clients from doing a WHO on the channel. Note that -# this module is not widely supported yet. If a client does not support -# UHNAMES it will not enable it, this will not break incompatible -# clients. -#<module name="m_uhnames.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Uninvite module: Adds the /UNINVITE command which lets users remove -# pending invites from channels without waiting for the user to join. -#<module name="m_uninvite.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Userip module: Adds the /USERIP command -# This module is oper-only. -# To use, USERIP must be in one of your oper class blocks. -#<module name="m_userip.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Vhost module: Adds the VHOST command which allows for adding virtual -# hosts which are accessible using a username and password in the config. -#<module name="m_vhost.so"> -# -#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# user - Username for the vhost. # -# # -# pass - Password for the vhost. # -# # -# hash - The hash for the specific user (optional) -# m_password_hash.so and a hashing module must be loaded for this to work -# # -# host - Vhost to set. # -# -#<vhost user="some_username" pass="some_password" host="some.host"> -#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Watch module: Adds the WATCH command, which is used by clients to -# maintain notify lists. -#<module name="m_watch.so"> -# -# Configuration tags: -# -#<watch maxentries="32"> -# -# Sets the maximum number of entries on a user's watch list. - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules) -# in a file "xline.db" which can be re-loaded on restart. This is useful -# for two reasons: it keeps bans so users may not evade them, and on -# bigger networks, server connections will take less time as there will -# be a lot less bans to apply - as most of them will already be there. -#<module name="m_xline_db.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# ZipLinks module: Adds support for zlib deflate on server to server -# connections. Both ends of the connection must load this module. -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_ziplink.cpp -# and run make install, then uncomment this module to enable it. -# -#<module name="m_ziplink.so"> -# -# To use this module, you must enable it as a ssl type in your -# <link> tags or <bind> tags using the ssl name 'ziplinks'. -# See the documentation of <link> and <bind>, respectively. -# - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# ____ _ _____ _ _ ____ _ _ _ # -# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # -# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # -# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # -# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # -# # -# To link servers to InspIRCd, you MUST load the m_spanningtree # -# module. Since several features (like SSL server links) rely on # -# other modules being loaded before m_spanningtree, the module itself # -# is at the bottom of this file. DO NOT forget to load it. If you DO # -# NOT do this, server links will NOT work at all. ie. The ports will # -# NOT bind, and /connect will not work properly. This is by design, # -# to allow for the implementation of other linking protocols in # -# modules in the future. # -# # - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Spanning Tree module - allows linking of servers using the spanning -# tree protocol (see the READ THIS BIT section above). -# You will almost always want to load this. -# -#<module name="m_spanningtree.so"> - - |