diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/conf/inspircd.conf.example | 16 | ||||
| -rw-r--r-- | docs/conf/links.conf.example | 4 | ||||
| -rw-r--r-- | docs/conf/modules.conf.example | 54 | ||||
| -rw-r--r-- | docs/conf/modules/unrealircd.conf.example | 12 |
4 files changed, 48 insertions, 38 deletions
diff --git a/docs/conf/inspircd.conf.example b/docs/conf/inspircd.conf.example index bd4629eca..551797f7b 100644 --- a/docs/conf/inspircd.conf.example +++ b/docs/conf/inspircd.conf.example @@ -148,10 +148,10 @@ # to this bind section. type="clients" - # ssl: If you want this bind section to use SSL, define either - # gnutls or openssl here. The appropriate SSL modules must be loaded - # for ssl to work. If you do not want this bind section to support ssl, - # just remove or comment out this option. + # ssl: If you want the port(s) in this bind tag to use SSL, set this + # to either "gnutls" or "openssl". The appropriate SSL module must be + # loaded for SSL to work. If you do not want the port(s) in this bind + # tag to support SSL, just remove or comment out this option. ssl="gnutls" > @@ -160,8 +160,8 @@ # When linking servers, the OpenSSL and GnuTLS implementations are completely # link-compatible and can be used alongside each other # on each end of the link without any significant issues. -# Supported ssl types are: "openssl" and "gnutls". -# You must load, m_ssl_openssl for OpenSSL or m_ssl_gnutls for GnuTLS. +# Supported SSL types are: "openssl" and "gnutls". +# You must load m_ssl_openssl for OpenSSL or m_ssl_gnutls for GnuTLS. <bind address="" port="7000,7001" type="servers"> <bind address="1.2.3.4" port="7005" type="servers" ssl="openssl"> @@ -450,7 +450,7 @@ # server: DNS server to use to attempt to resolve IP's to hostnames. # in most cases, you won't need to change this, as inspircd will # automatically detect the nameserver depending on /etc/resolv.conf - # (or, on windows, your set nameservers in the registry.) + # (or, on Windows, your set nameservers in the registry.) # Note that this must be an IP address and not a hostname, because # there is no resolver to resolve the name until this is defined! # @@ -628,7 +628,7 @@ # somaxconn: The maximum number of connections that may be waiting # in the accept queue. This is *NOT* the total maximum number of # connections per server. Some systems may only allow this to be up - # to 5, while others (such as linux and *BSD) default to 128. + # to 5, while others (such as Linux and *BSD) default to 128. somaxconn="128" # limitsomaxconn: By default, somaxconn (see above) is limited to a diff --git a/docs/conf/links.conf.example b/docs/conf/links.conf.example index e4ebea556..591ebcac3 100644 --- a/docs/conf/links.conf.example +++ b/docs/conf/links.conf.example @@ -55,11 +55,11 @@ bind="1.2.3.4" # statshidden: Defines if IP is shown to opers when - # /stats c is invoked. + # /STATS c is invoked. statshidden="no" # hidden: If this is set to yes, this server and its "child" - # servers will not be shown when users do a /map or /links + # servers will not be shown when users do a /MAP or /LINKS. hidden="no" # passwords: the passwords we send and receive. diff --git a/docs/conf/modules.conf.example b/docs/conf/modules.conf.example index b4a5afab6..5b79fc2b6 100644 --- a/docs/conf/modules.conf.example +++ b/docs/conf/modules.conf.example @@ -243,7 +243,7 @@ #<blockamsg delay="3" action="killopers"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block CAPS module: Blocking all-CAPS messages with channel mode +B. +# Block CAPS module: Adds channel mode +B, blocks all-CAPS messages. #<module name="m_blockcaps.so"> # #-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# @@ -254,10 +254,10 @@ # minlen - The minimum length a line must be for the block # # percent to have any effect. # # # -# capsmap - A list of chars to be considered CAPS, this was # -# you can add CAPS for your language. Also you can # -# add things like ! and space to further lock down # -# on caps usage. # +# capsmap - A list of chars to be considered CAPS. Can be used # +# to add CAPS characters for your language. Also you # +# can add things like ! and space to further lock # +# down on caps usage. # #<blockcaps percent="50" # minlen="5" # capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! "> @@ -273,12 +273,12 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CallerID module: Adds usermode +g which activates hybrid-style -# callerid: block all private messages unless you /accept first +# callerid: block all private messages unless you /ACCEPT first. #<module name="m_callerid.so"> # #-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # maxaccepts - Maximum number of entries a user can add to his # -# /accept list. Default is 16 entries. # +# /ACCEPT list. Default is 16 entries. # # operoverride - Can opers (note: ALL opers) override callerid? # # Default is no. # # tracknick - Preserve /accept entries when a user changes nick? # @@ -299,7 +299,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CBAN module: Lets you disallow channels from being used at runtime. -# This module is oper-only and provides /cban. +# This module is oper-only and provides /CBAN. # To use, CBAN must be in one of your oper class blocks. #<module name="m_cban.so"> @@ -473,7 +473,7 @@ #<module name="m_chgident.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# CHGNAME module: Adds the /CHGNAME command +# CHGNAME module: Adds the /CHGNAME command. # This module is oper-only. # To use, CHGNAME must be in one of your oper class blocks. #<module name="m_chgname.so"> @@ -481,8 +481,9 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Cloaking module: Adds usermode +x and cloaking support. # Relies on the module m_md5.so being loaded. -# To use, you should enable m_conn_umodes and add +x as -# an enabled mode. See the m_conn_umodes module for more information. +# To cloak users when they connect, load m_conn_umodes and set +# <connect:modes> to include the +x mode. The example <connect> tag +# shows this. See the m_conn_umodes module for more information. #<module name="m_cloaking.so"> # #-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# @@ -748,11 +749,13 @@ # # # Valid engines are: # # # -# glob - Glob patterns, provided via m_regex_glob.so # -# pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre # -# tre - TRE regexps, provided via m_regex_tre.so, requires libtre # -# posix - POSIX regexps, provided via m_regex_posix.so, not availale # -# on windows, no dependencies on other operating systems. # +# glob - Glob patterns, provided via m_regex_glob. # +# pcre - PCRE regexps, provided via m_regex_pcre, needs libpcre. # +# tre - TRE regexps, provided via m_regex_tre, requires libtre. # +# posix - POSIX regexps, provided via m_regex_posix, not available # +# on Windows, no dependencies on other operating systems. # +# stdlib - stdlib regexps, provided via m_regex_stdlib, see comment # +# at the <module> tag for info on availability. # # # #<filteropts engine="glob"> # # # @@ -805,8 +808,8 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Global load module: Allows loading and unloading of modules network- # wide (USE WITH EXTREME CAUTION!) -# This module is oper-only and provides /gloadmodule, /gunloadmodule -# and /greloadmodule. +# This module is oper-only and provides /GLOADMODULE, /GUNLOADMODULE +# and /GRELOADMODULE. # To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE # must be in one of your oper class blocks. #<module name="m_globalload.so"> @@ -1153,7 +1156,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nicklock module: Let opers change a user's nick and then stop that -# user from changing their nick again. +# user from changing their nick again until unlocked. # This module is oper-only. # To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks. #<module name="m_nicklock.so"> @@ -1240,8 +1243,13 @@ #<operlog tosnomask="off"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper prefixing module: Gives server operators a prefix status -# character on all channels they are in. +# Oper prefixing module: Adds a channel prefix mode +y which is given +# to all IRC operators automatically on all channels they are in. +# This prefix mode is more powerful than channel op and other regular +# prefix modes. +# +# Load this module if you want all your IRC operators to have channel +# operator powers. #<module name="m_operprefix.so"> # # You may additionally customise the prefix character. @@ -1442,7 +1450,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular expression provider for TRE regular expressions. # This is the same regular expression engine used by UnrealIRCd, so -# if you are most familiar with the syntax of /spamfilter from there, +# if you are most familiar with the syntax of /SPAMFILTER from there, # this is the provider you want. You need libtre installed in order # to compile and load this module. #<module name="m_regex_tre.so"> @@ -1611,7 +1619,7 @@ # Sethost module: Adds the /SETHOST command. # This module is oper-only. # To use, SETHOST must be in one of your oper class blocks. -# See m_chghost for how to customise valid chars for hostnames +# See m_chghost for how to customise valid chars for hostnames. #<module name="m_sethost.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# diff --git a/docs/conf/modules/unrealircd.conf.example b/docs/conf/modules/unrealircd.conf.example index d195e6afd..58f36da23 100644 --- a/docs/conf/modules/unrealircd.conf.example +++ b/docs/conf/modules/unrealircd.conf.example @@ -190,11 +190,13 @@ # # # Valid engines are: # # # -# glob - Glob patterns, provided via m_regex_glob.so # -# pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre # -# tre - TRE regexps, provided via m_regex_tre.so, requires libtre # -# posix - POSIX regexps, provided via m_regex_posix.so, not availale # -# on windows, no dependencies on other operating systems. # +# glob - Glob patterns, provided via m_regex_glob. # +# pcre - PCRE regexps, provided via m_regex_pcre, needs libpcre. # +# tre - TRE regexps, provided via m_regex_tre, requires libtre. # +# posix - POSIX regexps, provided via m_regex_posix, not available # +# on Windows, no dependencies on other operating systems. # +# stdlib - stdlib regexps, provided via m_regex_stdlib, see comment # +# at the <module> tag for info on availability. # # # <filteropts engine="glob"> # # |