diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/inspircd.conf.example | 145 |
1 files changed, 87 insertions, 58 deletions
diff --git a/docs/inspircd.conf.example b/docs/inspircd.conf.example index fc383580d..2c31849e1 100644 --- a/docs/inspircd.conf.example +++ b/docs/inspircd.conf.example @@ -14,13 +14,13 @@ # |___/ # # # ##################################||#################################### - #||# + #||# ##################################||#################################### # # # This is an example of the config file for InspIRCd. # # Change the options to suit your network # # # -# Last updated on : 09/01/2006 # +# Last updated on : 04/09/2006 # # Written by : CC (cc@backchat.co.za) # # Updated by : katsklaw (katsklaw@gmail.com) # # Updated by : brain (brain@inspircd.org) # @@ -79,17 +79,18 @@ # # # Enter the port and address bindings here. # # # -# bind address - specifies which the address which ports bind. # -# may be a hostname or an IP address. Resolution of # -# hostnames may block for up to one second per IP # -# as port binding occurs before the socket engine is # -# initialized and therefore nonblocking DNS is not # -# available at this point until startup is complete. # +# bind address - specifies which address ports bind to. Leaving this # +# field blank binds the port to all IPs available. # +# # # port - The port number to bind to # +# # # type - can be 'clients' or 'servers'. The clients type is # # a standard tcp based socket, the servers type is a # # also a TCP based connection but of a different # -# format. # +# format. SSL support is provided by modules, to # +# enable SSL support, please read the module section # +# of this configuration file. # +# # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # @@ -146,7 +147,7 @@ # slash (/) in which case it is treated as an absolute path. # # # # Syntax is as follows: # -# <include file="file.conf"> # +#<include file="file.conf"> # # # #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# @@ -168,7 +169,8 @@ # <connect allow="ip mask" localmax="3" globalmax="3"> # # <connect deny="ip mask"> # # # -# IP masks may be specified in CIDR format for IPV4 and IPV6. # +# IP masks may be specified in CIDR format or wildcard format, # +# for IPV4 and IPV6. # # # # You may optionally include timeout="x" on any allow line, which # # specifies the amount of time given before an unknown connection # @@ -219,7 +221,7 @@ # # <connect allow="196.12.*" password="secret"> -<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096" localmax="3" globalmax="3"> +<connect allow="*" timeout="60" flood="20" threshold="1" pingfreq="120" sendq="262144" recvq="8192" localmax="3" globalmax="3"> <connect deny="69.254.*"> <connect deny="3ffe::0/32"> @@ -245,12 +247,17 @@ # You can create your own named classes, if you want, in fact that # # is the whole idea of this system! # # # +# Note: It is possible to make a class which covers all available # +# commands. To do this, specify commands="*". This is not really # +# recommended, as it negates the whole purpose of the class system, # +# however it is provided for fast configuration (e.g. in test nets) # +# # -<class name="Shutdown" commands="DIE RESTART REHASH"> -<class name="ServerLink" commands="CONNECT SQUIT"> +<class name="Shutdown" commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOAD"> +<class name="ServerLink" commands="CONNECT SQUIT RCONNECT MKPASSWD MKSHA256"> <class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE"> -<class name="OperChat" commands="WALLOPS GLOBOPS"> -<class name="HostCloak" commands="SETHOST SETIDENT SETNAME"> +<class name="OperChat" commands="WALLOPS GLOBOPS SETIDLE SPYLIST SPYNAMES"> +<class name="HostCloak" commands="SETHOST SETIDENT SETNAME CHGHOST CHGIDENT"> #-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# @@ -266,13 +273,14 @@ # # # classes - specified above, used for flexibility for the # # server admin to decide on which operators get # -# what commands # +# what commands. Class names are case sensitive, # +# seperate multiple class names with spaces. # # # # host - optional hostmask operators will recieve on oper-up. # # # # Syntax is as follows: # # # -# <type name="name" classes="class name" host="oper hostmask"> # +# <type name="name" classes="class names" host="oper hostmask"> # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # @@ -295,21 +303,26 @@ # Opers are defined here. This is a very important section. # # Remember to only make operators out of truthworthy people. # # # -# name - oper name, best to use lower-case # +# name - oper name, This is case sensitive, so it is best to # +# use lower-case. # # # -# password - password to oper-up, # -# encryption not supported by inspircd. However, there # -# are modules that allow for oper password encryption. # +# password - password to oper-up, also case sensitive. # +# encryption is supported via modules. You may load # +# modules for MD5 or SHA256 encryption, and if you do, # +# this value will be a hash value, otherwise put a # +# plaintext password in this value. # # # -# host - host of client allowed to oper-up. # +# host - hosts of client allowed to oper-up. # # wildcards accepted, seperate multiple hosts with a # # space. You may also specify CIDR ip addresses. # # # # fingerprint - When using the m_ssl_oper_cert.so module, you may # # specify a key fingerprint here. This can be obtained # # using the /fingerprint command whilst the module is # -# loaded, and will lock this oper block to only the # -# user who has that specific key/certificate pair. # +# loaded, or from the notice given to you when you # +# connect to the ircd using a client certificate, # +# and will lock this oper block to only the user who # +# has that specific key/certificate pair. # # This enhances security a great deal, however it # # requires that opers use clients which can send ssl # # client certificates, if this is configured for that # @@ -318,7 +331,8 @@ # is not loaded, this configuration option has no # # effect and will be ignored. # # # -# type - specified above, defines the kind of operator # +# type - Sefines the kind of operator. This must match a type # +# tag you defined above, and is case sensitive. # # # # Syntax is as follows: # # <oper name="login" # @@ -341,9 +355,15 @@ # server may create outbound links to. # # # # name - The name is the canocial name of the server, does # -# not have to resolve - but it is expected to be sent # +# not have to resolve - but it is expected to be set # # in the remote servers connection info. # -# ipaddr - Valid host or ip address for remote server. * # +# # +# ipaddr - Valid host or ip address for remote server. These # +# hosts are resolved on rehash, and cached, if you # +# specify a hostname, so if you find that your server # +# is still trying to connect to an old IP after you # +# have updated your dns, try rehashing and then # +# attempting the connect again. # # # # port - The TCP port for the remote server. # # # @@ -372,7 +392,8 @@ # password or servername) # # # # allowmask - When this is defined, it indicates a range of IP # -# addresses to allow for this link (in CIDR form). # +# addresses to allow for this link (You may use CIDR # +# or wildcard form for this address). # # e.g. if your server is going to connect to you from # # the range 1.2.3.1 through 1.2.3.255, put 1.2.3.0/24 # # into this value. If it is not defined, then only # @@ -425,7 +446,7 @@ #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # These options let you define the path to your motd and rules # -# files. # +# files. These should be absolute paths. # # # <files motd="/home/cc/inspircd/conf/inspircd.motd" @@ -475,7 +496,8 @@ # Define the path to the PID file here. The PID file can be used to # # rehash the ircd from the shell or to terminate the ircd from the # # shell using shell scripts, perl scripts etc, and to monitor the # -# ircd's state via cron jobs. # +# ircd's state via cron jobs. This is IMPORTANT and you must define # +# it or the ircd will refuse to start. # # # <pid file="/path/to/inspircd.pid"> @@ -680,9 +702,6 @@ # http://www.inspircd.org/wiki/Modules_List for a list of modules and# # each modules link for any additional conf tags they require. # # # -# WINDOWS USERS PLEASE NOTE: You can still load these modules! They # -# are incorporated into the executable and can be loaded and removed # -# similarly to if they were in a ramdisk. # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # @@ -821,15 +840,15 @@ # be included. However, if prefix is not included, it will default # # to your networks name from the <server> tag. # # # -# <cloak key1="-543241423" # +# <cloak key1="543241423" # # key2="5378410432" # # key3="1143242382" # # key4="9504324581" # # prefix="mynet"> # # # -# Please note that the key values will accept any number, positive # -# or negative, and should be large numbers. Using small numbers such # -# as "7" or "1924" will seriously weaken the security of your cloak. # +# Please note that the key values will accept any number, and should # +# be large numbers. Using small numbers such as "7" or "1924" will # +# seriously weaken the security of your cloak. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Lusers: Shows the LUSERS output on connect @@ -844,10 +863,12 @@ # If you have the m_conn_waitpong.so module loaded, configure it with # # the <waitpong> tag: # # # -# sendsnotice - Whether to send a snotice on connect, like Unreal# +# sendsnotice - Whether to send a snotice on connect, like other # +# older ircds # +# # # killonbadreply - Whether to kill the user if they send the wrong # # PONG reply. # -# +# # #<waitpong sendsnotice="yes" killonbadreply="yes"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -856,11 +877,14 @@ # #-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # seconds, maxconns - Amount of connections per <seconds>. +# # timeout - Time to wait after the throttle was activated # before deactivating it. Be aware that the time # is seconds + timeout. +# # quitmsg - The message that users get if they attempt to # connect while the throttle is active. +# # bootwait - Amount of time to wait before enforcing the # throttling when the server just booted. # @@ -874,12 +898,14 @@ #-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_denychans.so module loaded, you need to specify # -# the channels to deny: +# the channels to deny: # # # # name - The channel name to deny. # +# # # allowopers - If operators are allowed to override the deny. # +# # # reason - Reason given for the deny. # -# +# # #<badchan name="#gods" allowopers="yes" reason="Tortoises!"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -897,11 +923,11 @@ # # # Optional - If you specify to use the m_filter or m_filter_pcre # # modules, then specfiy below the path to the filter.conf file. # -# +# # #<filter file="/path/to/inspircd/filter.conf"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Foobar module - does nothing - historical relic +# Foobar module: does nothing - historical relic #<module name="m_foobar.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -921,7 +947,7 @@ # # # Optional - If you specify to use the m_helpop.so module, then # # specify below the path to the helpop.conf file. # -# +# # #<helpop file="/path/to/inspircd/helpop.conf"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -932,7 +958,7 @@ # # # Optional - If you choose to use the m_hostchange.so module. # # Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module # -# +# # #<host suffix="polarbears.org"> #<hostchange mask="*@fbi.gov" action="addnick"> #<hostchange mask="*r00t@*" action="suffix"> @@ -953,12 +979,12 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # http stats module: Provides basic stats pages over HTTP -# Required m_httpd.so +# Requires m_httpd.so to be loaded for it to function. #<module name="m_http_stats.so"> # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # -# No extra configuration yet. +#<httpstats stylesheet="http://remote.style/sheet.css"> # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -971,7 +997,7 @@ # specify the timeout for ident lookups here. If not defined, it will # # default to one second. This is a non-blocking timeout which holds # # the user in a 'connecting' state until the lookup is complete. # -# +# # #<ident timeout="5"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1010,11 +1036,12 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # NAMESX module: Provides support for the NAMESX extension which allows # clients to see all the prefixes set on a user without getting confused. +# This is supported by mIRC, x-chat, klient, and maybe more. #<module name="m_namesx.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nicklock module: Let opers change a user's nick and then stop that -# user from changing their nick again. /NICKLOCK and /NICKUNLOCK +# user from changing their nick again. #<module name="m_nicklock.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1048,7 +1075,7 @@ #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you are using the m_operjoin.so module, specify the channel here # -# +# # #<operjoin channel="#channel"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1059,7 +1086,7 @@ #-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # If you are using the m_opermotd.so module, specify the motd here # -# +# # #<opermotd file="/path/to/oper.motd"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1092,7 +1119,7 @@ #<module name="m_opermodes.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Parking module: Adds parking support and /PARK and /UNPARK +# Parking module: Adds parking support via /PARK and /UNPARK #<module name="m_park.so"> # #-#-#-#-#-#-#-#-#-#-#-# PARK CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# @@ -1114,14 +1141,16 @@ #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Random Quote module: provides a random quote on connect +# Random Quote module: provides a random quote on connect. +# NOTE: Some of these may mimic fatal errors and confuse users and +# opers alike! - BEWARE! #<module name="m_randquote.so"> # #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_randquote.so module, then # # specify below the path to the randquotes.conf file. # -# +# # #<randquote file="/path/to/inspircd/randquotes.conf"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1203,14 +1232,14 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Show Whois module: Adds the +W usermode which allows opers -# to see when they are whois'ed +# to see when they are whois'ed (can be annoying). #<module name="m_showwhois.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Spy module: Adds the commands SPYLIST and SPYNAMES that let opers # see who is in a +s channel, and list +s channels, show keys of keyed # channels the oper is not a member of etc. (standard 'abusive' features -# of unrealircd, modulized here in InspIRCd). +# of many other ircds, modulized here in InspIRCd). #<module name="m_spy.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1406,7 +1435,7 @@ # # # You should already know what to do here :) # -<die value="You should probably edit your config *PROPERLY* and try again."> +<die value="No, i wasnt joking. You should probably edit your config *PROPERLY* and try again."> ######################################################################### |