1 ########################################################################
3 # ___ ___ ____ ____ _ #
4 # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
5 # | || '_ \/ __| '_ \| || |_) | | / _` | #
6 # | || | | \__ \ |_) | || _ <| |__| (_| | #
7 # |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
10 # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
11 # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
12 # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
13 # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
16 ##################################||####################################
18 ##################################||####################################
20 # This is an example of the config file for InspIRCd. #
21 # Change the options to suit your network #
25 # ____ _ _____ _ _ ____ _ _ _ #
26 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
27 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
28 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
29 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
31 # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
32 # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
33 # if you've configured InspIRCd before, these probably indicate #
34 # something new or different to this version and you SHOULD READ IT. #
36 ########################################################################
38 # Unalphabeticalise the modules list at your own risk #
40 ########################################################################
42 #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
44 # This optional tag allows you to include another config file #
45 # allowing you to keep your configuration tidy. The configuration #
46 # file you include will be treated as part of the configuration file #
47 # which includes it, in simple terms the inclusion is transparent. #
49 # All paths to config files are relative to the directory that the #
52 # You may also include an executable file, in which case if you do so #
53 # the output of the executable on the standard output will be added #
54 # to your config at the point of the include tag. #
56 # Syntax is as follows: #
57 #<include file="file.conf"> #
58 #<include executable="/path/to/executable parameters"> #
60 # Executable Include Example: #
61 #<include executable="/usr/bin/wget -q -O - http://mynet.net/inspircd.conf">
65 #-#-#-#-#-#-#-#-#-#-#-# VARIABLE DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
67 # You can define variables that will be substituted later in the #
68 # configuration file. This can be useful to allow settings to be #
69 # easily changed, or to parameterize a remote includes. #
71 # Variables may be redefined and may reference other variables. #
72 # Value expansion happens at the time the tag is read. #
74 # Using variable definitions REQUIRES that the config format be #
75 # changed to "xml" from the default "compat" that uses escape #
76 # sequences such as "\"" and "\n", and does not support <define> #
78 <define name="bindip" value="1.2.2.3">
79 <define name="localips" value="&bindip;/24">
81 #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
83 # Here is where you enter the information about your server. #
87 # name: Hostname of your server. Does not need to resolve, but
88 # does need to be correct syntax (something.somethingelse.tld).
89 name="penguin.omega.org.za"
91 # description: Server description. Spaces are allowed.
92 description="Waddle World"
94 # id: The SID to use for this server. This should not be uncommented
95 # unless there is a SID conflict. This must be three characters long.
96 # The first character must be a digit [0-9], the remaining two chars
97 # may be letters [A-Z] or digits.
100 # network: Network name given on connect to clients.
101 # Should be the same on all servers on the network and
102 # not contain spaces.
106 #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
108 # Describes the Server Administrator's real name (optionally), #
109 # nick, and email address. #
114 name="Johnny English"
116 # nick: Nickname (preferably what you use on the network)
119 # email: email address. Does not have to be valid
120 # but should be for the users to be able to contact you.
121 email="MI5@the.best.secret.agent">
124 #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
126 # Enter the port and address bindings here. #
129 # ____ _ _____ _ _ ____ _ _ _ #
130 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
131 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
132 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
133 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
135 # If you want to link servers to InspIRCd you must load the #
136 # m_spanningtree.so module! Please see the modules list below for #
137 # information on how to load this module! If you do not load this #
138 # module, server ports will NOT be bound! #
140 # PLEASE NOTE: If you have build InspIRCd with IPv6 support, you MUST #
141 # specify a bind address if you want the IRCd to bind to a IPv4 IP. #
144 # address: IP address to bind to if the box that you are hosting
145 # on has more than one IP, else the ircd will try to bind to all
146 # IP's on the box if this is not defined.
149 # port: Port for users or servers to be able to connect to.
150 # you can select multiple ports by separating them
151 # with a - character like the example below.
154 # type: Type of bind block this is. It can either be clients or
155 # servers. Whichever you select will be the only type able to connect
156 # to this bind section.
159 # ssl: If you want this bind section to use SSL, define either
160 # gnutls or openssl here. The appropriate SSL modules must be loaded
161 # for ssl to work. If you do not want this bind section to support ssl,
162 # just remove or comment out this option.
166 <bind address="" port="6660-6669" type="clients">
168 # When linking servers, the openssl and gnutls transports are completely
169 # link-compatible and can be used alongside each other
170 # on each end of the link without any significant issues.
171 # Transports can only be used on server blocks.
172 # Supported Transports are: "ziplinks", "openssl" and "gnutls".
173 # You must load m_ziplinks module for zip, m_ssl_openssl for openssl
174 # or m_ssl_gnutls for gnutls.
176 <bind address="" port="7000,7001" type="servers">
177 <bind address="1.2.3.4" port="7005" type="servers" ssl="openssl">
180 #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
182 # You can configure the passwords here which you wish to use for #
183 # the die and restart commands. Only trusted IRCop's who will #
184 # need this ability should know the die and restart password. #
188 # hash: what hash these passwords are hashed with. requires the module
189 # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
190 # loaded and the password hashing module (m_password_hash.so)
191 # loaded. Options here are: "md5", "sha256" and "ripemd160".
192 # Optional, but recommended. Create hashed password with:
193 # /mkpasswd <hash> <password>
196 # diepass: Password for opers to use if they need to shutdown (die)
200 # restartpass: Password for opers to use if they need to restart
205 #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
207 # This is where you can configure which connections are allowed #
208 # and denied access onto your server. The password is optional. #
209 # You may have as many of these as you require. To allow/deny all #
210 # connections, use a '*' or 0.0.0.0/0. #
212 # -- It is important to note that connect tags are read from the -- #
213 # TOP DOWN. This means that you should have more specific deny #
214 # and allow tags at the top, progressively more general, followed #
215 # by a <connect allow="*" (should you wish to have one). #
219 # deny: Will not let people connect if they have specified host/IP.
222 <connect deny="3ffe::0/32">
225 # name: Name to use for this connect block. Mainly used for
226 # connect class inheriting.
229 # parent: This setting is to specify if this connect class
230 # inherits settings from any other. Put the other class's name
231 # in here to use its settings as a template - for example, if
232 # you only want to adjust sendq and a password
235 # allow: What IP addresses/hosts to allow for this block.
238 # hash: what hash this password is hashed with. requires the module
239 # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
240 # loaded and the password hashing module (m_password_hash.so)
241 # loaded. Options here are: "md5", "sha256" and "ripemd160".
242 # Optional, but recommended. Create hashed password with:
243 # /mkpasswd <hash> <password>
246 # password: Password to use for this block/user(s)
249 # maxchans: Maximum number of channels a user in this class
250 # be in at one time. This overrides every other maxchans setting.
253 # timeout: How long (in seconds) the server will wait before
254 # disconnecting a user if they do not do anything on connect.
255 # (Note, this is a client-side thing, if the client does not
256 # send /nick, /user or /pass)
259 # localmax: Maximum local connections per IP (or CIDR mask, see below).
262 # globalmax: Maximum global (network-wide) connections per IP (or CIDR mask, see below).
265 # useident: Defines if users in this class MUST respond to a ident query or not.
268 # limit: How many users are allowed in this class
271 # modes: Usermodes that are set on users in this block on connect.
272 # Enabling this option requires that the m_conn_umodes module be loaded.
273 # This entry is highly recommended to use for/with IP Cloaking/masking.
274 # For the example to work, this also requires that the m_cloaking
275 # module be loaded as well.
278 # requireident, requiressl, requiresasl: require that users of this
279 # block have a valid ident response, use SSL, or have authenticated with SASL.
280 # Requires m_ident, m_sslinfo, or m_sasl respectively
283 # port: What port this user is allowed to connect on. (optional)
284 # The port MUST be set to listen in the bind blocks above.
288 # name: Name to use for this connect block. Mainly used for
289 # connect class inheriting.
292 # allow: What IP addresses/hosts to allow for this block.
295 # maxchans: Maximum number of channels a user in this class
296 # be in at one time. This overrides every other maxchans setting.
299 # timeout: How long (in seconds) the server will wait before
300 # disconnecting a user if they do not do anything on connect.
301 # (Note, this is a client-side thing, if the client does not
302 # send /nick, /user or /pass)
305 # pingfreq: How often (in seconds) the server tries to ping connecting clients.
308 # hardsendq: maximum amount of data allowed in a client's send queue
309 # before they are dropped. Keep this value higher than the length of
310 # your network's /LIST or /WHO output, or you will have lots of
311 # disconnects from sendq overruns!
314 # softsendq: amount of data in a client's send queue before the server
315 # begins delaying their commands in order to allow the sendq to drain
318 # recvq: amount of data allowed in a client's queue before they are dropped.
321 # threshold: This specifies the amount of command penalty a user is allowed to have
322 # before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
323 # ones such as /OPER have penalties up to 10.
325 # If you are not using fakelag, this should be at least 20 to avoid excess flood kills
326 # from processing some commands.
329 # commandrate: This specifies the maximum rate that commands can be processed.
330 # If commands are sent more rapidly, the user's penalty will increase and they will
331 # either be fakelagged or killed when they reach the threshold
333 # Units are millicommands per second, so 1000 means one line per second.
336 # fakelag: Use fakelag instead of killing users for excessive flood
338 # Fake lag stops command processing for a user when a flood is detected rather than
339 # immediately killing them; their commands are held in the recvq and processed later
340 # as the user's command penalty drops. Note that if this is enabled, flooders will
341 # quit with "RecvQ exceeded" rather than "Excess Flood".
344 # localmax: Maximum local connections per IP.
347 # globalmax: Maximum global (network-wide) connections per IP.
350 # useident: Defines if users in this class must respond to a ident query or not.
353 # limit: How many users are allowed in this class
356 # modes: Usermodes that are set on users in this block on connect.
357 # Enabling this option requires that the m_conn_umodes module be loaded.
358 # This entry is highly recommended to use for/with IP Cloaking/masking.
359 # For the example to work, this also requires that the m_cloaking
360 # module be loaded as well.
364 #-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
366 # CIDR configuration allows detection of clones and applying of #
367 # throttle limits across a CIDR range. (A CIDR range is a group of #
368 # IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
369 # represented as 192.168.1.0/24). This means that abuse across an ISP #
370 # is detected and curtailed much easier. Here is a good chart that #
371 # shows how many IPs the different CIDRs correspond to: #
372 # http://en.wikipedia.org/wiki/CIDR#Prefix_aggregation #
376 # ipv4clone: specifies how many bits of an IP address should be
377 # looked at for clones. The default only looks for clones on a
378 # single IP address of a user. You do not want to set this
379 # extremely low. (Values are 0-32).
382 # ipv6clone: specifies how many bits of an IP address should be
383 # looked at for clones. The default only looks for clones on a
384 # single IP address of a user. You do not want to set this
385 # extremely low. (Values are 0-128).
388 # This file has all the information about oper classes, types and o:lines.
389 # You *MUST* edit it.
390 <include file="conf/opers.conf.example">
392 # This file has all the information about server links and ulined servers.
393 # You *MUST* edit it if you intend to link servers.
394 <include file="conf/links.conf.example">
396 #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
399 # Files block - contains files whose contents are used by the ircd
401 # motd - displayed on connect and when a user executes /MOTD
402 # rules - displayed when the user executes /RULES
403 # Modules can also define their own files
404 <files motd="conf/inspircd.motd.example" rules="conf/inspircd.rules.example">
406 # Example of an executable file include. Note this will be read on rehash,
407 # not when the command is run.
408 #<execfiles rules="wget -O - http://www.example.com/rules.txt">
410 #-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
414 # users: Maximum number of channels a user can be in at once.
417 # opers: Maximum number of channels a oper can be in at once.
420 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
421 # If these values are not defined, InspIRCd uses the default DNS resolver
425 # server: DNS server to use to attempt to resolve IP's to hostnames.
426 # in most cases, you won't need to change this, as inspircd will
427 # automatically detect the nameserver depending on /etc/resolv.conf
428 # (or, on windows, your set nameservers in the registry.)
429 # Note that this must be an IP address and not a hostname, because
430 # there is no resolver to resolve the name until this is defined!
434 # timeout: seconds to wait to try to resolve DNS/hostname.
437 # An example of using an IPv6 nameserver
438 #<dns server="::1" timeout="5">
440 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
442 # Define the path to the PID file here. The PID file can be used to #
443 # rehash the ircd from the shell or to terminate the ircd from the #
444 # shell using shell scripts, perl scripts, etc... and to monitor the #
445 # ircd's state via cron jobs. If this is a relative path, it will be #
446 # relative to the configuration directory, and if it is not defined, #
447 # the default of 'inspircd.pid' is used. #
450 #<pid file="/path/to/inspircd.pid">
452 #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
454 # Use these tags to customise the ban limits on a per channel basis. #
455 # The tags are read from top to bottom, and any tag found which #
456 # matches the channels name applies the banlimit to that channel. #
457 # It is advisable to put an entry with the channel as '*' at the #
458 # bottom of the list. If none are specified or no maxbans tag is #
459 # matched, the banlist size defaults to 64 entries. #
462 <banlist chan="#morons" limit="128">
463 <banlist chan="*" limit="69">
465 #-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
467 # This tag is optional, and specifies one or more features which are #
468 # not available to non-operators. #
470 # For example you may wish to disable NICK and prevent non-opers from #
471 # changing their nicknames. #
472 # Note that any disabled commands take effect only after the user has #
473 # 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
474 # so for example disabling NICK will not cripple your network. #
476 # You can also define if you want to disable any channelmodes #
477 # or usermodes from your users. #
479 # `fakenonexistant' will make the ircd pretend that nonexistant #
480 # commands simply don't exist to non-opers ("no such command"). #
482 #<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">
485 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
487 # Just remove this... Its here to make you read ALL of the config #
490 <die value="You should probably edit your config *PROPERLY* and try again.">
494 #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
496 # Settings to define which features are usable on your server. #
500 # prefixquit: What (if anything) a users' quit message
501 # should be prefixed with.
504 # suffixquit: What (if anything) a users' quit message
505 # should be suffixed with.
508 # prefixpart: What (if anything) a users' part message
509 # should be prefixed with.
511 # NOTE: Use "\"" instead of """ if not using <config format="xml">
513 # suffixpart: What (if anything) a users' part message
514 # should be suffixed with.
517 # fixedquit: Set all users' quit messages to this value.
520 # fixedpart: Set all users' part messages in all channels
524 # syntaxhints: If enabled, if a user fails to send the correct parameters
525 # for a command, the ircd will give back some help text of what
526 # the correct parameters are.
529 # cyclehosts: If enabled, when a user gets a host set, it will cycle
530 # them in all their channels. If not, it will simply change their host
531 # without cycling them.
534 # ircumsgprefix: Use undernet-style message prefixing for NOTICE and
535 # PRIVMSG. If enabled, it will add users' prefix to the line, if not,
536 # it will just message the user normally.
539 # announcets: If set to yes, when the TimeStamp on a channel changes, all users
540 # in channel will be sent a NOTICE about it.
543 # allowmismatched: Setting this option to yes will allow servers to link even
544 # if they don't have the same VF_OPTCOMMON modules loaded. Setting this to
545 # yes may introduce some desyncs and weirdness.
548 # hostintopic: If enabled, channels will show the host of the topicsetter
549 # in the topic. If set to no, it will only show the nick of the topicsetter.
552 # pingwarning: If a server does not respond to a ping within x seconds,
553 # it will send a notice to opers with snomask +l informing that the server
554 # is about to ping timeout.
557 # serverpingfreq: How often pings are sent between servers (in seconds).
560 # defaultmodes: What modes are set on a empty channel when a user
561 # joins it and it is unregistered. This is similar to Asuka's
565 # moronbanner: This is the text that is sent to a user when they are
566 # banned from the server.
567 moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
569 # invitebypassmodes: This allows /invite to bypass other channel modes.
570 # (Such as +k, +j, +l, etc)
571 invitebypassmodes="yes">
574 #-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
578 # netbuffersize: Size of the buffer used to recieve data from clients.
579 # The ircd may only read this amount of text in 1 go at any time.
580 netbuffersize="10240"
582 # maxwho: Maximum number of results to show in a /who query.
585 # somaxconn: The maximum number of connections that may be waiting
586 # in the accept queue. This is *NOT* the total maximum number of
587 # connections per server. Some systems may only allow this to be up
588 # to 5, while others (such as linux and *BSD) default to 128.
591 # softlimit: This optional feature allows a defined softlimit for
592 # connections. If defined, it sets a soft max connections value.
593 # must be lower than ./configure maxclients.
596 # quietbursts: When syncing or splitting from a network, a server
597 # can generate a lot of connect and quit messages to opers with
598 # +C and +Q snomasks. Setting this to yes squelches those messages,
599 # which makes it easier for opers, but degrades the functionality of
600 # bots like BOPM during netsplits.
603 # nouserdns: If enabled, no DNS lookups will be performed on
604 # connecting users. This can save a lot of resources on very busy servers.
607 #-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
612 # announceinvites: If this option is set, then invites are announced
613 # to the channel when a user invites another user. If you consider
614 # this to be unnecessary noise, set this to 'none'.
615 # To announce to all ops, set this to 'ops' and to announce to all users,
616 # set the value to 'all'. The value 'dynamic' will make the messages
617 # go to every user who has power of INVITE on the channel. This
618 # is the recommended setting.
619 announceinvites="dynamic"
621 # hidemodes: If enabled, then the listmodes given will be hidden
622 # from users below halfop. This is not recommended to be set on +b
623 # as it may break some functionality in popular clients such as mIRC.
626 # hideulines: If this value is set to yes, U-lined servers will
627 # be hidden from non-opers in /links and /map.
630 # flatlinks: If this value is set to yes, /map and /links will
631 # be flattened when shown to non-opers.
634 # hidewhois: When defined, the given text will be used in place
635 # of the server a user is on when whoised by a non-oper. Most
636 # networks will want to set this to something like "*.netname.net"
637 # to conceal the actual server a user is on.
640 # hidebans: If this value is set to yes, when a user is banned ([gkz]lined)
641 # only opers will see the ban message when the user is removed
645 # hidekills: If defined, replaces who set a /kill with a custom string.
648 # hidesplits: If enabled, non-opers will not be able to see which
649 # servers split in a netsplit, they will only be able to see that one
650 # occurred (If their client has netsplit detection).
653 # maxtargets: Maximum number of targets per command.
654 # (Commands like /notice, /privmsg, /kick, etc)
657 # customversion: Displays a custom string when a user /version's
658 # the ircd. This may be set for security reasons or vanity reasons.
661 # operspywhois: If this is set to yes, when a oper /whois 's a user,
662 # it will show all channels the user is in including +s and +p
666 # runasuser: If this is set, InspIRCd will attempt to setuid
667 # to run as this user- allows binding of ports under 1024.
668 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
671 # runasgroup: If this is set, InspIRCd will attempt to set group
672 # to run under this group, which allows binding of ports under 1024
673 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
676 # restrictbannedusers: If this is set to yes, InspIRCd will not allow users
677 # banned on a channel to change nickname or message channels they are
679 restrictbannedusers="yes"
681 # genericoper: Setting this value to yes makes all opers on this server
682 # appear as 'is an IRC operator' in their WHOIS, regardless of their
683 # oper type, however oper types are still used internally. This only
684 # affects the display in WHOIS.
687 # userstats: /stats commands that users can run (opers can run all).
690 #-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
692 # This configuration tag defines the maximum sizes of various types #
693 # on IRC, such as the maximum length of a channel name, and the #
694 # maximum length of a channel. Note that with the exception of the #
695 # identmax value all values given here are the exact values you would #
696 # expect to see on IRC. This contrasts with the older InspIRCd #
697 # releases where these values would be one character shorter than #
698 # defined to account for a null terminator on the end of the text. #
700 # These values should match network-wide otherwise issues will occur. #
702 # The highest safe value you can set any of these options to is 500, #
703 # but it is recommended that you keep them somewhat #
704 # near their defaults (or lower). #
707 # maxnick: Maximum length of a nickname.
710 # maxchan: Maximum length of a channel name.
713 # maxmodes: Maximum number of mode changes per line.
716 # maxident: Maximum length of a ident/username.
719 # maxquit: Maximum length of a quit message.
722 # maxtopic: Maximum length of a channel topic.
725 # maxkick: Maximum length of a kick message.
728 # maxgecos: Maximum length of a GECOS (realname).
731 # maxaway: Maximum length of an away message.
735 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
739 # Logging is covered with the <log> tag, which you may use to change
740 # the behaviour of the logging of the IRCd.
742 # In InspIRCd as of 1.2, logging is pluggable and very extensible.
743 # Different files can log the same thing, different 'types' of log can
744 # go to different places, and modules can even extend the log tag
745 # to do what they want.
747 # An example log tag would be:
748 # <log method="file" type="OPER" level="default" target="opers.log">
749 # which would log all information on /oper (failed and successful) to
750 # a file called opers.log.
752 # There are many different types which may be used, and modules may
753 # generate their own. A list of useful types:
754 # - USERS - information relating to user connection and disconnection
755 # - CHANNELS - information relating to joining and parting of channels.
756 # XXX someone doc more on this
758 # You may also log *everything* by using a type of *, and subtract things out
759 # of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
761 # The following log tag is highly default and uncustomised. It is recommended you
762 # sort out your own log tags. This is just here so you get some output.
764 <log method="file" type="* -USERINPUT -USEROUTPUT -m_spanningtree" level="default" target="ircd.log">
766 #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
768 # This tag lets you define the behaviour of the /whowas command of #
773 # groupsize: Maximum entries per nick shown when performing
777 # maxgroups: Maximum number of nickgroups that can be added to
778 # the list so that /whowas does not use a lot of resources on
782 # maxkeep: Maximum time a nick is kept in the whowas list
783 # before being pruned. Time may be specified in seconds,
784 # or in the following format: 1y2w3d4h5m6s. Minimum is
788 #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
790 # The ban tags define nick masks, host masks and ip ranges which are #
791 # banned from your server. All details in these tags are local to #
796 # ipmask: IP range to ban. Wildcards and CIDR can be used.
799 # reason: Reason to display when user is disconnected.
800 reason="No porn here thanks.">
803 # nick: Nick to disallow. Wildcards are supported.
806 # reason: Reason to display on /nick.
807 reason="Reserved For Services">
809 <badnick nick="NickServ" reason="Reserved For Services">
810 <badnick nick="OperServ" reason="Reserved For Services">
811 <badnick nick="MemoServ" reason="Reserved For Services">
814 # host: ident@hostname to ban.
815 # Wildcards and CIDR (if you specify an IP) can be used.
816 host="*@hundredz.n.hundredz.o.1337.kiddies.com"
818 # reason: Reason to display when user is disconnected
819 reason="Too many 1337 kiddiots">
821 <badhost host="root@*" reason="Don't irc as root!">
822 <badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
824 # exception: Hosts that are exempt from [kgz]lines.
826 # host: ident@hostname to exempt.
827 # Wildcards and CIDR (if you specify an IP) can be used.
828 host="*@ircop.host.com"
830 # reason: Reason for exception. Only shown in /stats e
831 reason="Opers hostname">
833 #-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
835 # This optional tag allows you to specify how wide a gline, eline, #
836 # kline, zline or qline can be before it is forbidden from being #
837 # set. By setting hostmasks="yes", you can allow all G, K, E lines, #
838 # no matter how many users the ban would cover. This is not #
839 # recommended! By setting ipmasks="yes", you can allow all Z lines, #
840 # no matter how many users these cover too. Needless to say we #
841 # don't recommend you do this, or, set nickmasks="yes", which will #
846 # hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
849 # ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
852 # nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
855 # trigger: What percentage of users on the network to trigger
856 # specifying an insane ban as. The default is 95.5%, which means
857 # if you have a 1000 user network, a ban will not be allowed if it
858 # will be banning 955 or more users.
862 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
864 # You should already know what to do here :) #
866 <die value="User error. Insert new user and press any key. (you didn't edit your config properly.)">
868 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
869 # ____ _ _____ _ _ ____ _ _ _ #
870 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
871 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
872 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
873 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
875 # Well done, you've reached the end of the basic configuration, your #
876 # ircd should now start if you want to try it out! (./inspircd start) #
878 # We now suggest you read and edit modules.conf, as modules are what #
879 # provide almost all the features of InspIRCd. :) #
881 # The default does nothing -- we include it for simplicity for you. #
882 <include file="conf/modules.conf.example">
884 # Here are some pre-built modules.conf files that closely match the
885 # default configurations of some popular IRCd's. You still may want to
886 # look over them and make sure if everything is correct for you and setup
887 # the proper SSL information.
889 # *NOTE*: These files have no comments for what the modules do. If you
890 # are interested in that, please read the modules.conf.example. It is also
891 # recommended that you make your own modules file based on modules.conf.example.
893 # Settings similar to UnrealIRCd defaults.
894 #<include file="conf/modules/modules.conf.unreal">
896 # Settings similar to Charybdis IRCd defaults.
897 #<include file="conf/modules/modules.conf.charybdis">
900 #########################################################################
902 # - InspIRCd Development Team - #
903 # http://www.inspircd.org #
905 #########################################################################