1 ########################################################################
3 # ___ ___ ____ ____ _ #
4 # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
5 # | || '_ \/ __| '_ \| || |_) | | / _` | #
6 # | || | | \__ \ |_) | || _ <| |__| (_| | #
7 # |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
10 # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
11 # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
12 # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
13 # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
16 ##################################||####################################
18 ##################################||####################################
20 # This is an example of the config file for InspIRCd. #
21 # Change the options to suit your network #
25 # ____ _ _____ _ _ ____ _ _ _ #
26 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
27 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
28 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
29 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
31 # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
32 # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
33 # if you've configured InspIRCd before, these probably indicate #
34 # something new or different to this version and you SHOULD READ IT. #
36 ########################################################################
38 # Unalphabeticalise the modules list at your own risk #
40 ########################################################################
42 #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
44 # This optional tag allows you to include another config file #
45 # allowing you to keep your configuration tidy. The configuration #
46 # file you include will be treated as part of the configuration file #
47 # which includes it, in simple terms the inclusion is transparent. #
49 # All paths to config files are relative to the directory of the main #
50 # config file inspircd.conf, unless the filename starts with a forward#
51 # slash (/) in which case it is treated as an absolute path. #
53 # You may also include an executable file, in which case if you do so #
54 # the output of the executable on the standard output will be added #
55 # to your config at the point of the include tag. #
57 # Syntax is as follows: #
58 #<include file="file.conf"> #
59 #<include executable="/path/to/executable parameters"> #
61 # Executable Include Example: #
62 #<include executable="/usr/bin/wget -q -O - http://mynet.net/inspircd.conf">
66 #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
68 # Here is where you enter the information about your server. #
72 # name: Hostname of your server. Does not need to resolve, but
73 # does need to be correct syntax (something.somethingelse.tld).
74 name="penguin.omega.org.za"
76 # description: Server description. Spaces are allowed.
77 description="Waddle World"
79 # id: The SID to use for this server. This should not be uncommented
80 # unless there is a SID conflict. This must be three characters long.
81 # The first character must be a digit [0-9], the remaining two chars
82 # may be letters [A-Z] or digits.
85 # network: Network name given on connect to clients.
86 # Should be the same on all servers on the network and
91 #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
93 # Describes the Server Administrator's real name (optionally), #
94 # nick, and email address. #
101 # nick: Nickname (preferably what you use on the network)
104 # email: email address. Does not have to be valid
105 # but should be for the users to be able to contact you.
106 email="MI5@the.best.secret.agent">
109 #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
111 # Enter the port and address bindings here. #
114 # ____ _ _____ _ _ ____ _ _ _ #
115 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
116 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
117 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
118 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
120 # If you want to link servers to InspIRCd you must load the #
121 # m_spanningtree.so module! Please see the modules list below for #
122 # information on how to load this module! If you do not load this #
123 # module, server ports will NOT be bound! #
125 # PLEASE NOTE: If you have build InspIRCd with IPv6 support, you MUST #
126 # specify a bind address if you want the IRCd to bind to a IPv4 IP. #
129 # address: IP address to bind to if the box that you are hosting
130 # on has more than one IP, else the ircd will try to bind to all
131 # IP's on the box if this is not defined.
134 # port: Port for users or servers to be able to connect to.
135 # you can select multiple ports by separating them
136 # with a - character like the example below.
139 # type: Type of bind block this is. It can either be clients or
140 # servers. Whichever you select will be the only type able to connect
141 # to this bind section.
144 # ssl: If you want this bind section to use SSL, define either
145 # gnutls or openssl here. The appropriate SSL modules must be loaded
146 # for ssl to work. If you do not want this bind section to support ssl,
147 # just remove or comment out this option.
150 <bind address="" port="6660-6669" type="clients">
152 # When linking servers, the openssl and gnutls transports are largely
153 # link-compatible and can be used alongside each other
154 # on each end of the link without any significant issues.
155 # Transports can only be used on server blocks.
156 # Supported Transports are: "zip", "openssl" and "gnutls".
157 # You must load m_ziplinks module for zip, m_ssl_openssl for openssl
158 # or m_ssl_gnutls for gnutls.
160 <bind address="" port="7000,7001" type="servers">
161 <bind address="1.2.3.4" port="7005" type="servers" transport="openssl">
164 #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
166 # You can configure the passwords here which you wish to use for #
167 # the die and restart commands. Only trusted IRCop's who will #
168 # need this ability should know the die and restart password. #
172 # hash: what hash these passwords are hashed with. requires the module
173 # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
174 # loaded and the password hashing module (m_password_hash.so)
175 # loaded. Options here are: "md5", "sha256" and "ripemd160".
176 # Optional, but recommended. Create hashed password with:
177 # /mkpasswd <hash> <password>
180 # diepass: Password for opers to use if they need to shutdown (die)
184 # restartpass: Password for opers to use if they need to restart
189 #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
191 # This is where you can configure which connections are allowed #
192 # and denied access onto your server. The password is optional. #
193 # You may have as many of these as you require. To allow/deny all #
194 # connections, use a '*' or 0.0.0.0/0. #
196 # -- It is important to note that connect tags are read from the -- #
197 # TOP DOWN. This means that you should have more specific deny #
198 # and allow tags at the top, progressively more general, followed #
199 # by a <connect allow="*" (should you wish to have one). #
203 # deny: Will not let people connect if they have specified host/IP.
206 <connect deny="3ffe::0/32">
209 # name: Name to use for this connect block. Mainly used for
210 # connect class inheriting.
213 # parent: This setting is to specify if this connect class
214 # inherits settings from any other. Put the other class's name
215 # in here to use its settings as a template - for example, if
216 # you only want to adjust sendq and a password
219 # allow: What IP addresses/hosts to allow for this block.
222 # hash: what hash this password is hashed with. requires the module
223 # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
224 # loaded and the password hashing module (m_password_hash.so)
225 # loaded. Options here are: "md5", "sha256" and "ripemd160".
226 # Optional, but recommended. Create hashed password with:
227 # /mkpasswd <hash> <password>
230 # password: Password to use for this block/user(s)
233 # port: What port this user is allowed to connect on. (optional)
234 # The port MUST be set to listen in the bind blocks above.
238 # name: Name to use for this connect block. Mainly used for
239 # connect class inheriting.
242 # allow: What IP addresses/hosts to allow for this block.
245 # maxchans: Maximum number of channels a user in this class
246 # be in at one time. This overrides every other maxchans setting.
249 # timeout: How long (in seconds) the server will wait before
250 # disconnecting a user if they do not do anything on connect.
251 # (Note, this is a client-side thing, if the client does not
252 # send /nick, /user or /pass)
255 # pingfreq: How often (in seconds) the server tries to ping connecting clients.
258 # sendq: Amount of data that the server is allowed to send to the user
259 # before they are dropped.
262 # recvq: amount of data allowed in a clients queue before they are dropped.
265 # localmax: Maximum local connections per IP.
268 # globalmax: Maximum global (network-wide) connections per IP.
271 # useident: Defines if users in this class must respond to a ident query or not.
274 # limit: How many users are allowed in this class
277 # modes: Usermodes that are set on users in this block on connect.
278 # Enabling this option requires that the m_conn_umodes module be loaded.
279 # This entry is highly recommended to use for/with IP Cloaking/masking.
283 #-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
285 # CIDR configuration allows detection of clones and applying of #
286 # throttle limits across a CIDR range. (A CIDR range is a group of #
287 # IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
288 # represented as 192.168.1.0/24). This means that abuse across an ISP #
289 # is detected and curtailed much easier. #
293 # ipv4clone: specifies how many bits of an IP address should be
294 # looked at for clones. The default only looks for clones on a
295 # single IP address of a user. You do not want to set this
296 # extremely low. (Values are 0-32).
299 # ipv6clone: specifies how many bits of an IP address should be
300 # looked at for clones. The default only looks for clones on a
301 # single IP address of a user. You do not want to set this
302 # extremely low. (Values are 0-128).
305 # This file has all the information about oper classes, types and o:lines.
306 # You *MUST* edit it.
307 <include file="opers.conf.example">
309 # This file has all the information about server links and ulined servers.
310 # You *MUST* edit it if you intend to link servers.
311 <include file="links.conf.example">
313 #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
317 # motd: Path to your motd file. Path is relative to the conf directory.
318 motd="inspircd.motd.example"
320 # rules: Path to your rules file. Path is relative to the conf directory.
321 rules="inspircd.rules.example">
323 #-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
327 # users: Maximum number of channels a user can be in at once.
330 # opers: Maximum number of channels a oper can be in at once.
333 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
334 # If these values are not defined, InspIRCd uses the default DNS resolver
338 # server: DNS server to use to attempt to resolve IP's to hostnames.
341 # timeout: seconds to wait to try to resolve DNS/hostname.
344 # An example of using an IPv6 nameserver
345 #<dns server="::1" timeout="5">
347 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
349 # Define the path to the PID file here. The PID file can be used to #
350 # rehash the ircd from the shell or to terminate the ircd from the #
351 # shell using shell scripts, perl scripts, etc... and to monitor the #
352 # ircd's state via cron jobs. If this is a relative path, it will be #
353 # relative to the configuration directory, and if it is not defined, #
354 # the default of 'inspircd.pid' is used. #
357 #<pid file="/path/to/inspircd.pid">
359 #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
361 # Use these tags to customise the ban limits on a per channel basis. #
362 # The tags are read from top to bottom, and any tag found which #
363 # matches the channels name applies the banlimit to that channel. #
364 # It is advisable to put an entry with the channel as '*' at the #
365 # bottom of the list. If none are specified or no maxbans tag is #
366 # matched, the banlist size defaults to 64 entries. #
369 <banlist chan="#morons" limit="128">
370 <banlist chan="*" limit="69">
372 #-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
374 # This tag is optional, and specifies one or more features which are #
375 # not available to non-operators. #
377 # For example you may wish to disable NICK and prevent non-opers from #
378 # changing their nicknames. #
379 # Note that any disabled commands take effect only after the user has #
380 # 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
381 # so for example disabling NICK will not cripple your network. #
383 # You can also define if you want to disable any channelmodes #
384 # or usermodes from your users. #
386 # `fakenonexistant' will make the ircd pretend that nonexistant #
387 # commands simply don't exist to non-opers ("no such command"). #
389 #<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">
392 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
394 # Just remove this... Its here to make you read ALL of the config #
397 <die value="You should probably edit your config *PROPERLY* and try again.">
401 #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
403 # Settings to define which features are usable on your server. #
407 # prefixquit: What (if anything) a users' quit message
408 # should be prefixed with.
411 # suffixquit: What (if anything) a users' quit message
412 # should be suffixed with.
415 # prefixpart: What (if anything) a users' part message
416 # should be prefixed with.
419 # suffixpart: What (if anything) a users' part message
420 # should be suffixed with.
423 # syntaxhints: If enabled, if a user fails to send the correct parameters
424 # for a command, the ircd will give back some help text of what
425 # the correct parameters are.
428 # cyclehosts: If enabled, when a user gets a host set, it will cycle
429 # them in all their channels. If not, it will simply change their host
430 # without cycling them.
433 # ircumsgprefix: Use undernet-style message prefixing for NOTICE and
434 # PRIVMSG. If enabled, it will add users' prefix to the line, if not,
435 # it will just message the user normally.
438 # announcets: If set to yes, when the TS on a channel changes, all users
439 # in channel will be sent a NOTICE about it.
442 # hostintopic: If enabled, channels will show the host of the topicsetter
446 # pingwarning: If a server does not respond to a ping within x seconds,
447 # it will send a notice to opers with snomask +l informing that the server
448 # is about to ping timeout.
451 # serverpingfreq: How often pings are sent between servers (in seconds).
454 # allowhalfop: Allows the use of +h channelmode (halfops).
457 # defaultmodes: What modes are set on a empty channel when a user
458 # joins it and it is unregistered. This is similar to Asuka's
462 # moronbanner: This is the text that is sent to a user when they are
463 # banned from the server.
464 moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
466 # exemptchanops: Defines what channel modes channel operators are
467 # exempt from. Supported modes are +TCGfcSFBgN. Defaults to off.
470 # invitebypassmodes: This allows /invite to bypass other channel modes.
471 # (Such as +k, +j, +l, etc)
472 invitebypassmodes="yes">
475 #-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
479 # netbuffersize: Size of the buffer used to recieve data from clients.
480 # The ircd may only read this amount of text in 1 go at any time.
481 netbuffersize="10240"
483 # maxwho: Maximum number of results to show in a /who query.
484 # It is not recommended to set this above 1024.
487 # somaxconn: The maximum number of connections that may be waiting
488 # in the accept queue. This is *NOT* the total maximum number of
489 # connections per server. Some systems may only allow this to be up
490 # to 5, while others (such as linux and *BSD) default to 128.
493 # softlimit: This optional feature allows a defined softlimit for
494 # connections. If defined, it sets a soft max connections value.
495 # must be lower than ./configure maxclients.
498 # quietbursts: When syncing or splitting from a network, a server
499 # can generate a lot of connect and quit messages to opers with
500 # +C and +Q snomasks. Setting this to yes squelches those messages,
501 # which makes it easier for opers, but degrades the functionality of
502 # bots like BOPM during netsplits.
505 # nouserdns: If enabled, no DNS lookups will be performed on
506 # connecting users. This can save a lot of resources on very busy servers.
509 #-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
514 # announceinvites: If this option is set, then invites are announced
515 # to the channel when a user invites another user. If you consider
516 # this to be unnecessary noise, set this to 'none'.
517 # To announce to all ops, set this to 'ops' and to announce to all users,
518 # set the value to 'all'. The value 'dynamic' will make the messages
519 # go to every user who has power of INVITE on the channel. This
520 # is the recommended setting.
521 announceinvites="dynamic"
523 # hidemodes: If enabled, then the listmodes given will be hidden
524 # from users below halfop. This is not recommended to be set on +b
525 # as it may break some functionality in popular clients such as mIRC.
528 # hideulines: If this value is set to yes, U-lined servers will
529 # be hidden from non-opers in /links and /map.
532 # flatlinks: If this value is set to yes, /map and /links will
533 # be flattened when shown to non-opers.
536 # hidewhois: When defined, the given text will be used in place
537 # of the server a user is on when whoised by a non-oper. Most
538 # networks will want to set this to something like "*.netname.net"
539 # to conceal the actual server a user is on.
542 # hidebans: If this value is set to yes, when a user is banned ([gkz]lined)
543 # only opers will see the ban message when the user is removed
547 # hidekills: If defined, replaces who set a /kill with a custom string.
550 # hidesplits: If enabled, non-opers will not be able to see which
551 # servers split in a netsplit, they will only be able to see that one
552 # occurred (If their client has netsplit detection).
555 # maxtargets: Maximum number of targets per command.
556 # (Commands like /notice, /privmsg, /kick, etc)
559 # customversion: Displays a custom string when a user /version's
560 # the ircd. This may be set for security reasons or vanity reasons.
563 # operspywhois: If this is set to yes, when a oper /whois 's a user,
564 # it will show all channels the user is in including +s and +p
568 # runasuser: If this is set, InspIRCd will attempt to setuid
569 # to run as this user- allows binding of ports under 1024.
570 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
573 # runasgroup: If this is set, InspIRCd will attempt to set group
574 # to run under this group, which allows binding of ports under 1024
575 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
578 # restrictbannedusers: If this is set to yes, InspIRCd will not allow users
579 # banned on a channel to change nickname or message channels they are
581 restrictbannedusers="yes"
583 # genericoper: Setting this value to yes makes all opers on this server
584 # appear as 'is an IRC operator' in their WHOIS, regardless of their
585 # oper type, however oper types are still used internally. This only
586 # affects the display in WHOIS.
589 # userstats: /stats commands that users can run (opers can run all).
592 #-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
594 # This configuration tag defines the maximum sizes of various types #
595 # on IRC, such as the maximum length of a channel name, and the #
596 # maximum length of a channel. Note that with the exception of the #
597 # identmax value all values given here are the exact values you would #
598 # expect to see on IRC. This contrasts with the older InspIRCd #
599 # releases where these values would be one character shorter than #
600 # defined to account for a null terminator on the end of the text. #
602 # These values should match network-wide otherwise issues will occur. #
605 # maxnick: Maximum length of a nickname.
608 # maxchan: Maximum length of a channel name.
611 # maxmodes: Maximum number of mode changes per line.
614 # maxident: Maximum length of a ident/username.
617 # maxquit: Maximum length of a quit message.
620 # maxtopic: Maximum length of a channel topic.
623 # maxkick: Maximum length of a kick message.
626 # maxgecos: Maximum length of a GECOS (realname).
629 # maxaway: Maximum length of an away message.
633 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
637 # Logging is covered with the <log> tag, which you may use to change
638 # the behaviour of the logging of the IRCd.
640 # In InspIRCd as of 1.2, logging is pluggable and very extensible.
641 # Different files can log the same thing, different 'types' of log can
642 # go to different places, and modules can even extend the log tag
643 # to do what they want.
645 # An example log tag would be:
646 # <log method="file" type="OPER" level="default" target="opers.log">
647 # which would log all information on /oper (failed and successful) to
648 # a file called opers.log.
650 # There are many different types which may be used, and modules may
651 # generate their own. A list of useful types:
652 # - USERS - information relating to user connection and disconnection
653 # - CHANNELS - information relating to joining and parting of channels.
654 # XXX someone doc more on this
656 # You may also log *everything* by using a type of *, and subtract things out
657 # of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
659 # The following log tag is highly default and uncustomised. It is recommended you
660 # sort out your own log tags. This is just here so you get some output.
662 <log method="file" type="* -USERINPUT -USEROUTPUT -m_spanningtree" level="default" target="ircd.log">
664 #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
666 # This tag lets you define the behaviour of the /whowas command of #
671 # groupsize: Maximum entries per nick shown when performing
675 # maxgroups: Maximum number of nickgroups that can be added to
676 # the list so that /whowas does not use a lot of resources on
680 # maxkeep: Maximum time a nick is kept in the whowas list
681 # before being pruned. Time may be specified in seconds,
682 # or in the following format: 1y2w3d4h5m6s. Minimum is
686 #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
688 # The ban tags define nick masks, host masks and ip ranges which are #
689 # banned from your server. All details in these tags are local to #
694 # ipmask: IP range to ban. Wildcards and CIDR can be used.
697 # reason: Reason to display when user is disconnected.
698 reason="No porn here thanks.">
701 # nick: Nick to disallow. Wildcards are supported.
704 # reason: Reason to display on /nick.
705 reason="Reserved For Services">
707 <badnick nick="NickServ" reason="Reserved For Services">
708 <badnick nick="OperServ" reason="Reserved For Services">
709 <badnick nick="MemoServ" reason="Reserved For Services">
712 # host: ident@hostname to ban.
713 # Wildcards and CIDR (if you specify an IP) can be used.
714 host="*@hundredz.n.hundredz.o.1337.kiddies.com"
716 # reason: Reason to display when user is disconnected
717 reason="Too many 1337 kiddiots">
719 <badhost host="root@*" reason="Don't irc as root!">
720 <badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
722 # exception: Hosts that are exempt from [kgz]lines.
724 # host: ident@hostname to exempt.
725 # Wildcards and CIDR (if you specify an IP) can be used.
726 host="*@ircop.host.com"
728 # reason: Reason for exception. Only shown in /stats e
729 reason="Opers hostname">
731 #-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
733 # This optional tag allows you to specify how wide a gline, eline, #
734 # kline, zline or qline can be before it is forbidden from being #
735 # set. By setting hostmasks="yes", you can allow all G, K, E lines, #
736 # no matter how many users the ban would cover. This is not #
737 # recommended! By setting ipmasks="yes", you can allow all Z lines, #
738 # no matter how many users these cover too. Needless to say we #
739 # don't recommend you do this, or, set nickmasks="yes", which will #
744 # hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
747 # ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
750 # nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
753 # trigger: What percentage of users on the network to trigger
754 # specifying an insane ban as. The default is 95.5%, which means
755 # if you have a 1000 user network, a ban will not be allowed if it
756 # will be banning 955 or more users.
760 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
762 # You should already know what to do here :) #
764 <die value="User error. Insert new user and press any key. (you didn't edit your config properly.)">
766 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
767 # ____ _ _____ _ _ ____ _ _ _ #
768 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
769 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
770 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
771 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
773 # Well done, you've reached the end of the basic configuration, your #
774 # ircd should now start if you want to try it out! (./inspircd start) #
776 # We now suggest you read and edit modules.conf, as modules are what #
777 # provide almost all the features of InspIRCd. :) #
779 # The default does nothing -- we include it for simplicity for you. #
780 <include file="modules.conf.example">
783 #########################################################################
785 # - InspIRCd Development Team - #
786 # http://www.inspircd.org #
788 #########################################################################