2 # InspIRCd Configuration Script
4 # Copyright 2003 The ChatSpike Development Team
5 # <brain@chatspike.net>
6 # <Craig@chatspike.net>
11 ########################################
13 echo "Configuring default values..."
16 GCCVER=`gcc -dumpversion | cut -c 1`
17 GCC34=`gcc -dumpversion | cut -c 3`
19 MODULE_DIR=$ME/modules
21 INSTALL=`which install`
24 MAX_CLIENT_T=`ulimit -n`
29 OSNAME=`(uname -s) 2>/dev/null` || OSNAME="unknown"
31 if [ -z $MAX_CLIENT_T ] ; then
37 if [ "$1" = "-clean" -o "$2" = "-clean" ] ; then
38 `rm -rf .config.cache`
41 if [ -e ".config.cache" -a -z "$CLEAN" ] ; then
45 if [ "$1" = "-update" -o "$2" = "-update" ] ; then
46 # They wanna update their Makefile.. good for 'em
47 # Make sure .config.cache exists
48 if [ ! -e ".config.cache" ] ; then
49 echo "You have not run ./configure before. Please do this before trying to run the update script."
52 # Right, load the cache values
59 FLAGS="-fPIC -frtti $OPTIMISATI"
64 FLAGS="-fPIC -frtti $OPTIMISATI"
70 for module in src/modules/*.cpp ; do
71 mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
72 MODULES="$MODULES $mod"
75 # Write the new makefile.
76 for file in Makefile; do
77 echo -e "\033[0;37mWriting \033[1;32m$file\033[0;37m"
80 s%@MAKEPROG@%$MAKEPROG%g
83 s%@CONFIG_DIR@%$CONFIG_DIR%g
84 s%@MODULE_DIR@%$MODULE_DIR%g
85 s%@BINARY_DIR@%$BINARY_DIR%g
86 s%@MODULES@%$MODULES%g
87 " .${file}.inc >> $file
89 echo -e "\033[0;37mWriting \033[1;32msrc/modules/Makefile\033[0;37m"
90 rm -f src/modules/Makefile
92 # Generate the Header..
94 echo "# (C) ChatSpike development team" >> src/modules/Makefile
95 echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
96 echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
97 echo "# for assisting with making this work right." >> src/modules/Makefile
98 echo "#" >> src/modules/Makefile
99 echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
100 echo "# please run ./configure --update" >> src/modules/Makefile
101 echo "" >> src/modules/Makefile
102 echo "all: \$(MODULES)" >> src/modules/Makefile
103 echo "" >> src/modules/Makefile
106 for module in src/modules/*.cpp ; do
107 flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
108 mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
109 mod2=`echo $module | sed 's/src\/modules\///'`
110 echo "$mod:" >> src/modules/Makefile
111 echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
112 echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
113 echo "" >> src/modules/Makefile
122 if [ -z $MAX_CLIENT ] ; then
123 MAX_CLIENT=$MAX_CLIENT_T
129 if [ "`eval echo -e -n 'a'`" = "-n a" ] ; then
135 exists () { # because some shells don't have test -e
136 if [ -f $1 -o -d $1 -o -p $1 -o -c $1 -o -b $1 ] ; then
143 echo "#include <string.h>">.test.cpp
144 echo "#include <stdio.h>">>.test.cpp
145 echo "int main() { char a[10]; char b[10]; strlcpy(a,b,10); printf(\"%d\\n\",999); }" >>.test.cpp
146 g++ -o .test .test.cpp 2>&1
147 HAS_STRLCPY=`./.test 2>&1`
148 rm -f .test.cpp .test
151 echo -e "'\033[1;33m####\033[0;37m:'\033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m::'\033[1;33m######\033[0;37m::'\033[1;33m########\033[0;37m::'\033[1;33m####\033[0;37m:'\033[1;33m########\033[0;37m:::'\033[1;33m######\033[0;37m::'\033[1;33m########\033[0;37m::"
152 echo -e ". \033[1;33m##\033[0;37m:: \033[1;33m###\033[0;37m:: \033[1;33m##\033[0;37m:'\033[1;33m##\033[0;37m... \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m.... \033[1;33m##\033[0;37m:. \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m.... \033[1;33m##\033[0;37m:'\033[1;33m##\033[0;37m... \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m.... \033[1;33m##\033[0;37m:"
153 echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m####\033[0;37m: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m:::..:: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m:::..:: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
154 echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m \033[1;33m##\033[0;37m \033[1;33m##\033[0;37m:. \033[1;33m######\033[0;37m:: \033[1;33m########\033[0;37m::: \033[1;33m##\033[0;37m:: \033[1;33m########\033[0;37m:: \033[1;33m##\033[0;37m::::::: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
155 echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m. \033[1;33m####\033[0;37m::..... \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m.....:::: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m.. \033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m::::::: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
156 echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m:. \033[1;33m###\033[0;37m:'\033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m::::::::: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m::. \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
157 echo -e "'\033[1;33m####\033[0;37m: \033[1;33m##\033[0;37m::. \033[1;33m##\033[0;37m:. \033[1;33m######\033[0;37m:: \033[1;33m##\033[0;37m::::::::'\033[1;33m####\033[0;37m: \033[1;33m##\033[0;37m:::. \033[1;33m##\033[0;37m:. \033[1;33m######\033[0;37m:: \033[1;33m########\033[0;37m::"
158 echo -e "\033[0;37m\033[0;37m....::..::::..:::......:::..:::::::::....::..:::::..:::......:::........:::"
160 echo -e "\033[1;37mWelcome to the InspIRCd Configuration program!"
162 echo "*** If you are unsure of any of these values, leave it blank for ***"
163 echo "*** standard settings that will work, and your server will run ***"
164 echo "*** using them. If you are running this server as part of a ***"
165 echo "*** larger network, you must consult with your network admins ***"
166 echo "*** for the proper values to use, or server links will be unstable! ***"
168 echo -e "Press \033[1;37m<RETURN>\033[0;37m to accept the default for any option, or enter"
169 echo -e "a new value. Please note: You will \033[1;37mHAVE\033[0;37m to read the docs"
170 echo -e "dir, otherwise you won't have a config file!"
172 echo -e "Your operating system is: \033[1;37m$OSNAME\033[0;37m (`uname -mnr`), fdmax: $MAX_CLIENT_T"
175 #############################################################################
179 echo "In what directory are the configuration files?"
180 while [ $ok -eq 0 ] ; do
181 echo -e $n "[\033[1;32m$CONFIG_DIR\033[0;37m] -> $c"
182 if read INPUT ; then : ; else echo "" ; exit 1 ; fi
183 if [ ! "$INPUT" ] ; then
187 if echo "$INPUT" | grep -q \[\'\"\\\] ; then
188 echo 'Please use a pathname without the characters: '\'' " \'
189 elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
190 if exists "$INPUT" ; then
191 echo "$INPUT exists, but is not a directory!"
193 echo "$INPUT does not exist. Create it?"
194 echo -e $n "[\033[1;32my\033[0;37m] $c"
196 if [ "$YN" != "n" ] ; then
197 if mkdir -p "$INPUT" ; then
210 ##############################################################################
214 echo "In What directory are the modules to be compiled to?"
215 while [ $ok -eq 0 ] ; do
216 echo -e $n "[\033[1;32m$MODULE_DIR\033[0;37m] -> $c"
217 if read INPUT ; then : ; else echo "" ; exit 1 ; fi
218 if [ ! "$INPUT" ] ; then
222 if echo "$INPUT" | grep -q \[\'\"\\\] ; then
223 echo 'Please use a pathname without the characters: '\'' " \'
224 elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
225 if exists "$INPUT" ; then
226 echo "$INPUT exists, but is not a directory!"
228 echo "$INPUT does not exist. Create it?"
229 echo -e $n "[\033[1;32my\033[0;37m] $c"
231 if [ "$YN" != "n" ] ; then
232 if mkdir -p "$INPUT" ; then
245 ##############################################################################
249 echo "In what directory is the IRCd binary to be placed?"
250 while [ $ok -eq 0 ] ; do
251 echo -e $n "[\033[1;32m$BINARY_DIR\033[0;37m] -> $c"
252 if read INPUT ; then : ; else echo "" ; exit 1 ; fi
253 if [ ! "$INPUT" ] ; then
257 if echo "$INPUT" | grep -q \[\'\"\\\] ; then
258 echo 'Please use a pathname without the characters: '\'' " \'
259 elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
260 if exists "$INPUT" ; then
261 echo "$INPUT exists, but is not a directory!"
263 echo "$INPUT does not exist. Create it?"
264 echo -e $n "[\033[1;32my\033[0;37m] $c"
266 if [ "$YN" != "n" ] ; then
267 if mkdir -p "$INPUT" ; then
279 ###############################################################################
280 # Craigs Version 3 With slightly less Cheeze :p
283 echo -e "Maximum number of clients at any one time (\033[1;32m1-$MAX_CLIENT_T\033[0;37m)?"
284 while [ "$cheeze" -eq "0" ] ; do
285 echo -e $n "[\033[1;32m$MAX_CLIENT\033[0;37m] -> $c"
288 if [ -z "$cc" ] ; then
294 if [ "$cc" -gt "$MAX_CLIENT_T" -a -z "$SCAN_FAILED" ] ; then
295 echo -e "WARNING: Our scans have indicated that you are attempting"
296 echo -e "to use more sockets than there are avaliable. Are you sure"
297 echo -e "you wish to do this? It may cause the IRCd to malfunction [y/n]"
298 echo -e $n "[\033[1;32mn\033[0;37m] -> $c"
300 if [ "$YN" = "y" ] ; then
305 echo -e "Please enter the correct value (\033[1;32m1-$MAX_CLIENT_T\033[0;37m)"
315 echo "You must enter a number in this field. Please try again."
322 ###############################################################################
325 echo -e "What is the Maximum length of nicknames?"
326 while [ "$cheeze" -eq "0" ] ; do
327 echo -e $n "[\033[1;32m$NICK_LENGT\033[0;37m] -> $c"
337 echo "You Must Enter a Number in this field. Please Try Again."
347 ###############################################################################
350 echo -e "What is the Maximum length of channel names?"
351 while [ "$cheeze" -eq "0" ] ; do
352 echo -e $n "[\033[1;32m$MAX_CHANNE\033[0;37m] -> $c"
362 echo "You Must Enter a Number in this field. Please Try Again."
372 ###############################################################################
375 echo -e "What is the Maximum number of mode changes in one line?"
376 while [ "$cheeze" -eq "0" ] ; do
377 echo -e $n "[\033[1;32m$MAXI_MODES\033[0;37m] -> $c"
387 echo "You Must Enter a Number in this field. Please Try Again."
397 ###############################################################################
401 echo -e "Enter the Level Of Binary optimisation. This is a number between 0 and 3 (inclusive)"
402 echo -e "The InspIRCd Team will _NOT_ support any bug reports above 0."
403 echo -e "Also note, the IRCd behaviour will be different depending on this value."
404 echo -e "Please read the documentation for more information."
406 echo -e "The Higher the number, the more optimised your binary will be. This value will default to 0"
407 echo -e "If you either a) Dont enter a number, or b) Enter a value outside the range."
408 echo -e $n "[\033[1;32m$OPTIMITEMP\033[0;37m] -> $c"
410 if [ -z "$cc" ] ; then
433 ###############################################################################
436 echo -e "\033[1;32mPre-build configuration is complete!\033[0;37m"
438 echo -e "\033[0;37mConfig path:\033[1;32m\t\t\t$CONFIG_DIR"
439 echo -e "\033[0;37mModule path:\033[1;32m\t\t\t$MODULE_DIR"
440 echo -e "\033[0;37mMax connections:\033[1;32m\t\t$MAX_CLIENT"
441 echo -e "\033[0;37mMax User Channels\033[1;32m\t\t$MAX_CHANNE"
442 echo -e "\033[0;37mMax nickname length:\033[1;32m\t\t$NICK_LENGT"
443 echo -e "\033[0;37mMax channel length:\033[1;32m\t\t$CHAN_LENGT"
444 echo -e "\033[0;37mMax mode length:\033[1;32m\t\t$MAXI_MODES"
445 echo -e "\033[0;37mGCC Version Found:\033[1;32m\t\t$GCCVER.$GCC34"
446 echo -e "\033[0;37mOptimatizaton Flag:\033[1;32m\t\t$OPTIMISATI"
449 echo "Writing cache file for future ./configures ..."
452 if [ "$CONFIG_DIR" != "$ME/conf" ] ; then
457 if [ -e ".config.cache" ] ; then
460 echo "CONFIG_DIR=\"$CONFIG_DIR\"" >> .config.cache
461 echo "MODULE_DIR=\"$MODULE_DIR\"" >> .config.cache
462 echo "BINARY_DIR=\"$BINARY_DIR\"" >> .config.cache
463 echo "MAX_CLIENT=\"$MAX_CLIENT\"" >> .config.cache
464 echo "MAX_CHANNE=\"$MAX_CHANNE\"" >> .config.cache
465 echo "NICK_LENGT=\"$NICK_LENGT\"" >> .config.cache
466 echo "MAXI_MODES=\"$MAXI_MODES\"" >> .config.cache
467 echo "OPTIMITEMP=\"$OPTIMITEMP\"" >> .config.cache
468 echo "OPTIMISATI=\"$OPTIMISATI\"" >> .config.cache
469 echo "GCC34=\"$GCC34\"" >> .config.cache
470 echo "HAS_STRLCPY=\"$HAS_STRLCPY\"" >> .config.cache
471 echo "COPY_CONF=\"$COPY_CONF\"" >> .config.cache
473 echo -e "Writing \033[1;32minspircd_config.h"
475 echo "/* Auto generated by configure, do not modify! */" >include/inspircd_config.h
476 echo "" >>include/inspircd_config.h
477 if [ "$GCCVER" -eq "3" ] ; then
478 echo "#define GCC3" >>include/inspircd_config.h
479 if [ "$GCC34" -gt "3" ] ; then
480 echo "#define GCC34" >>include/inspircd_config.h
483 if [ "$HAS_STRLCPY" -eq "999" ] ; then
484 echo "#define HAS_STRLCPY" >>include/inspircd_config.h
486 echo "#define SYSLOG_FACILITY LOG_DAEMON" >>include/inspircd_config.h
487 echo "#define SYSLOG_LEVEL LOG_NOTICE" >>include/inspircd_config.h
488 echo "#define CONFIG_FILE \"$CONFIG_DIR/inspircd.conf\"" >>include/inspircd_config.h
489 echo "#define MOD_PATH \"$MODULE_DIR\"" >>include/inspircd_config.h
490 echo "#define VERSION \"`sh ./src/version.sh`\"" >>include/inspircd_config.h
491 echo "#define MAXCLIENTS $MAX_CLIENT" >>include/inspircd_config.h
492 echo "#define NICKMAX $NICK_LENGT" >>include/inspircd_config.h
493 echo "#define CHANMAX $CHAN_LENGT" >>include/inspircd_config.h
494 echo "#define MAXCHANS $MAX_CHANNE" >>include/inspircd_config.h
495 echo "#define MAXMODES $MAXI_MODES" >>include/inspircd_config.h
496 echo "#define OPTIMISATION $OPTIMITEMP" >>include/inspircd_config.h
497 echo "#define SYSTEM \"`uname -n -s -r`\"" >>include/inspircd_config.h
498 echo "#define MAXBUF 514">>include/inspircd_config.h
499 touch include/inspircd_config.h
504 FLAGS="-fPIC -frtti $OPTIMISATI"
509 FLAGS="-fPIC -frtti $OPTIMISATI"
515 for module in src/modules/*.cpp ; do
516 mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
517 MODULES="$MODULES $mod"
520 for file in Makefile inspircd; do
521 echo -e "\033[0;37mWriting \033[1;32m$file\033[0;37m"
524 s%@MAKEPROG@%$MAKEPROG%g
527 s%@CONFIG_DIR@%$CONFIG_DIR%g
528 s%@MODULE_DIR@%$MODULE_DIR%g
529 s%@BINARY_DIR@%$BINARY_DIR%g
530 s%@MODULES@%$MODULES%g
531 " .${file}.inc >> $file
535 echo -e "\033[0;37mWriting \033[1;32msrc/modules/Makefile\033[0;37m"
536 rm -f src/modules/Makefile
538 # Generate the Header..
540 echo "# (C) ChatSpike development team" >> src/modules/Makefile
541 echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
542 echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
543 echo "# for assisting with making this work right." >> src/modules/Makefile
544 echo "#" >> src/modules/Makefile
545 echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
546 echo "# please run ./configure --update" >> src/modules/Makefile
547 echo "" >> src/modules/Makefile
548 echo "all: \$(MODULES)" >> src/modules/Makefile
549 echo "" >> src/modules/Makefile
551 for module in src/modules/*.cpp ; do
552 flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
553 mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
554 mod2=`echo $module | sed 's/src\/modules\///'`
555 echo "$mod:" >> src/modules/Makefile
556 echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
557 echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
558 echo "" >> src/modules/Makefile
565 echo "Do you want to compile the IRCd binaries?"
566 echo -e $n "[\033[1;32my\033[0;37m] $c"
568 if [ "$YN" != "n" ] ; then
570 echo -e "\033[1;32mCompiling...\033[0;37m"
578 echo -e "To build your server with these settings, please type '\033[1;32m$MAKEPROG\033[0;37m' now."
583 echo -e "*** \033[1;32mRemember to edit your configuration files!!!\033[0;37m ***"