[user/henk/code/inspircd.git] / docs / conf / helpop-full.conf.example

#####################
#  Helpop Standard  #
#####################

<alias text="HELP" replace="HELPOP $2-">

<helpop key="start" value="InspIRCd Help System

This system provides help for commands and modes.
Specify your question or a command name as the
parameter for this command.

/HELPOP CUSER    -      To see a list of user commands
/HELPOP COPER    -      To see a list of oper commands
/HELPOP UMODES   -      To see a list of user modes
/HELPOP CHMODES  -      To see a list of channel modes
/HELPOP SNOMASKS -      To see a list of oper snotice masks
/HELPOP EXTBANS  -      To see a list of extended bans">

<helpop key="nohelp" value="There is no help for the topic
you searched for. Please try again.">

#####################
#   User Commands   #
#####################

<helpop key="cuser" value="User Commands
-------------

PRIVMSG   NOTICE   NICK      JOIN      PART
CYCLE     KNOCK    MODE      DEVOICE   TOPIC
KICK      FPART    REMOVE    TBAN      INVITE
UNINVITE  AWAY     DCCALLOW  SILENCE   ACCEPT
MKPASSWD  VHOST    TITLE     SETNAME

WHOIS     WHOWAS   ISON      USERHOST  WATCH
LIST      NAMES    WHO       MOTD
ADMIN     MAP      LINKS     LUSERS    TIME
STATS     VERSION  INFO      MODULES   COMMANDS
SSLINFO

USER      PASS     PING     PONG       QUIT

OPER">

<helpop key="sslinfo" value="/SSLINFO [nick]

Displays information on the SSL connection and certificate of the
target user.">

<helpop key="uninvite" value="/UNINVITE [nick] [channel]

Uninvite a user from a channel, same syntax as INVITE.">

<helpop key="tban" value="/TBAN [channel] [duration] [banmask]

Sets a timed ban. The duration of the ban can be specified in the
following format: 1w2d3h4m6s which indicates a ban of one week, two
days, three hours, four minutes and six seconds. Alternatively the
ban may just be specified as a number of seconds. All timed bans
appear in the banlist as normal bans and may be safely removed
before their time is up.">

<helpop key="dccallow" value="/DCCALLOW [+|-] [nick] [duration]

Adds a nickname to or deletes a nickname from your DCCALLOW list.">

<helpop key="accept" value="/ACCEPT [+-*] [nick]{ [, [+-]<nick> ] }

Manages your accept list. This list is used to determine who can
private message you when you have usermode +g set. ACCEPT +nick adds
a nick to your accept list, ACCEPT -nick removes a nick from your
accept list, and ACCEPT * displays your accept list.">

<helpop key="cycle" value="/CYCLE [channel]

Cycles a channel (leaving and rejoining), overrides restrictions that
would stop a new user joining, such as user limits and channel keys.">

<helpop key="title" value="/TITLE [name] [password]

Authenticate for a WHOIS title line and optionally a vhost using the
specified username and password.">

<helpop key="watch" value="/WATCH [C|S|+/-[NICK]]

Adds or deletes a user from the watch list. C clears the list
and S queries the status.">

<helpop key="vhost" value="/VHOST [username] [password]

Authenticate for a vhost using the specified username and password.">

<helpop key="remove" value="/REMOVE [nick] [channel] {[reason]}

Removes a user from a channel you specify. You must be at least a
channel halfoperator to remove a user. A removed user will part with
a message stating they were removed from the channel and by whom.">

<helpop key="rmode" value="/RMODE [channel] [modeletter] {[pattern]}

Removes listmodes from a channel.
E.g. /RMODE #Chan b m:* will remove all mute extbans.">

<helpop key="fpart" value="/FPART [channel] [nick] {[reason]}

This behaves identically to /REMOVE, the only difference is that that
[channel] and [nick] parameters are switched around to match /KICK's
syntax. Also, /REMOVE is a builtin mIRC command which caused trouble
for some users. This feature was added in the 1.1 branch.">

<helpop key="devoice" value="/DEVOICE [channel]

Devoices yourself from the specified channel.">

<helpop key="silence" value="/SILENCE [+/-][hostmask] [p|c|i|n|t|a|x]

A serverside ignore of the given n!u@h mask. The letter(s) at the end
specify what is to be ignored from this hostmask.

Valid SILENCE Flags
-------------------

 p        Block private messages
 c        Block channel messages
 i        Block invites
 n        Block private notices
 t        Block channel notices
 a        Block all of the above
 x        Exception

Multiple letters may be specified. For an exception, you msut pair x
with what you want excepted. For example, if you wanted to except
everything from people with a host matching *.foo.net, you would do
/SILENCE +*!*@*.foo.net xa

/SILENCE without a parameter will list the hostmasks that you have silenced.">

<helpop key="knock" value="/KNOCK [channel]

Sends a notice to a channel indicating you wish to join.">

<helpop key="user" value="/USER [ident] [local host] [remote host] :[GECOS]

This command is used by your client to register your
IRC session, providing your ident and GECOS to the
server.

You should not use it during an established connection.">

<helpop key="nick" value="/NICK [new nick]

Change your nickname to [new nick].">

<helpop key="quit" value="/QUIT {[reason]}

Quit from IRC and end your current session.">

<helpop key="version" value="/VERSION

Returns the server's version information.">

<helpop key="ping" value="/PING [server]

Ping a server. Target server will answer with a PONG.">

<helpop key="pong" value="/PONG [server]

Your client should send this to answer server PINGs. You
should not issue this command manually.">

<helpop key="admin" value="/ADMIN [server]

Shows the administrative information for the given server.">

<helpop key="privmsg" value="/PRIVMSG [target] [text]

Sends a message to a user or channel specified in [target].">

<helpop key="notice" value="/NOTICE [target] [text]

Sends a notice to a user or channel specified in [target].">

<helpop key="join" value="/JOIN [channel]{,[channel]} [key]{,[key]}

Joins one or more channels you provide the names for.">

<helpop key="names" value="/NAMES [channel]{,[channel]}

Return a list of users on the channels you provide.">

<helpop key="part" value="/PART [channel]{,[channel] [reason]}

Leaves one or more channels you specify.">

<helpop key="kick" value="/KICK [channel] [nick] {[reason]}

Kicks a user from a channel you specify. You must be
At least a channel halfoperator to kick a user.">

<helpop key="mode" value="/MODE [target] [+|-][modes]{[+|-][modes]} {mode parameters}

Sets the mode for a channel or a nickname specified in [target]
A user may only set modes upon themselves, and may not set the
+o usermode, and a user may only change channel modes of
channels where they are at least a halfoperator.

For a list of all user and channel modes, enter /HELPOP UMODES or
/HELPOP CHMODES.">

<helpop key="topic" value="/TOPIC [channel] {topic}

Sets or retrieves the channel topic. If a channel topic is
given in the command and either the channel is not +t, or
you are at least a halfoperator, the channel topic will be
changed to the new one you provide.">

<helpop key="who" value="/WHO [ [search-pattern] [ohurmaiMplf] ]

Looks up the information of users matching the range you provide.
You may only /WHO nicknames in channels or on servers where you
share a common channel with them, or ones which are not +i (unless
you are an IRC operator). The search-pattern may be a special
sequence of characters determined by the flags given below, or
it may be one of a nickname, a channel, a hostmask, an ip address
mask or a server mask.

Valid WHO Flags
---------------

The following flags after the mask have the following effects:

 o      Show online IRC operators matching the mask

 a      Show all users who have an away message matching the given mask
 i      Show all users who have an ident (username) matching the given mask
 p      Show all users who are connected on the given port number
 r      Show all users whose realnames match the mask. When this
        flag is set it overrides the meaning of the search-pattern,
        which must contain a glob pattern intended to match GECOS
        (realname) fields.
 m      Search for all users with a given set of user modes. When
        this flag is set it overrides the meaning of the
        search-pattern, which must contain the mode sequence to
        search for, for example to find all users with +i and
        without +s, issue the command WHO +i-s m.
 t      Show users connected within this number of seconds
 M      Show all users who have metadata attached to them with
        the given key name

 f      Show only remote (far) users
 l      Show only local users

 h      Show real hostnames rather than masked hostnames (IRC
        operators only)
 u      Unlimit the results past the maximum /who results value
        (IRC operators only)

You may combine multiple flags in one WHO command except where stated in the table above.">

<helpop key="motd" value="/MOTD [server]

Show the message of the day for [server]. Messages of the day often
contain important server rules and notices and should be read prior
to using a server.">

<helpop key="oper" value="/OPER [login] [password]

Attempts to authenticate a user as an IRC operator.

Both successful and unsuccessful oper attempts are
logged, and sent to online IRC operators.">

<helpop key="list" value="/LIST [pattern]

Creates a list of all existing channels matching the glob pattern
[pattern], e.g. *chat* or bot*.">

<helpop key="lusers" value="/LUSERS

Shows a count of local and remote users, servers and channels.">

<helpop key="userhost" value="/USERHOST [nickname]

Returns the hostname and nickname of a user, and some other
miscellaneous information.">

<helpop key="away" value="/AWAY {message}

If a message is given, marks you as being away, otherwise
removes your away status and previous message.">

<helpop key="ison" value="/ISON [nick] {[nick]...}

Returns a subset of the nicks you give, showing only those
that are currently online.">

<helpop key="invite" value="/INVITE [nick] [channel] {[time]}

Invites a user to a channel. If the channel is NOT +A, only
channel halfoperators or above can invite people. If +A is set,
anyone can invite people to the channel, as long as the person
doing the invite is a member of the channel they wish to invite
the user to.

Invited users may override bans, +k, and similar in addition to
+i, depending on configuration.

If a time is provided, the invite expires after that time and the user
can no longer use it to enter the channel.">

<helpop key="pass" value="/PASS [password]

This command is used by your client when setting up
your IRC session to submit a server password to the
server.

You should not use it during an established connection.">

<helpop key="whowas" value="/WHOWAS [nick]

Returns a list of times the user was seen recently on IRC along with
the time they were last seen and their server.">

<helpop key="links" value="/LINKS

Shows all servers linked to this one.">

<helpop key="map" value="/MAP

Shows a graphical representation of all users and servers on the
network, and the links between them, as a tree from the perspective
of your server.">

<helpop key="whois" value="/WHOIS [nick] {server}

Returns the WHOIS information of a user, their channels, hostname,
etc. If a second nickname or server is provided, then a whois is
performed from the server where the user is actually located rather
than locally, showing idle and signon times.">

<helpop key="time" value="/TIME [servermask]

Returns the local time of the server, or remote time of another
server.">

<helpop key="info" value="/INFO

Returns information on the developers and supporters who made this
IRC server possible.">

<helpop key="setname" value="/SETNAME [name]

Sets your name to the specified name.">


#####################
#   Oper Commands   #
#####################

<helpop key="coper" value="Oper Commands
-------------

OPERMOTD  CHECK     CLONES      USERIP   LINE
ALLTIME   MODULES   WALLOPS     GLOBOPS

SETHOST   SETIDENT  CHGHOST     CHGIDENT CHGNAME
SETIDLE   SWHOIS

SANICK    NICKLOCK  NICKUNLOCK

SAJOIN    SAPART    SAMODE      SATOPIC  SAKICK

KILL      SAQUIT    GLINE       ZLINE    QLINE
KLINE     RLINE     ELINE       CBAN     SHUN
FILTER    OJOIN

CONNECT   SQUIT     RCONNECT    RSQUIT

DIE            RESTART      REHASH
CLEARCACHE     LOADMODULE   UNLOADMODULE
RELOADMODULE   GLOADMODULE  GUNLOADMODULE
GRELOADMODULE  RELOAD       CLOSE
LOCKSERV       UNLOCKSERV   JUMPSERVER">

<helpop key="userip" value="/USERIP [nickname]

Returns the ip and nickname of a user.">

<helpop key="tline" value="/TLINE [host or ip mask]

This command returns the number of local and global clients matched,
and the percentage of clients matched, plus how they were matched
(by IP address or by hostname).">

<helpop key="lockserv" value="/LOCKSERV

Locks out all new connections notifying connecting users that the
service is temporarily closed and to try again later.">

<helpop key="unlockserv" value="/UNLOCKSERV

Opens the server up again for new connections.">

<helpop key="jumpserver" value="/JUMPSERVER {[newserver] [newport] [+/-flags] {:[reason]}}

Sets or cancels jumpserver mode. If no parameters are given,
jumpserver mode is cancelled, if it is currently set. If parameters
are given, a server address must be given for [newserver] and a
server port must be given for [newport]. Zero or more status flags
should be given for 'flags', from the list below (if you do not
wish to specify any flags just place a '+' in this field):

1. +a: Redirect all users immediately (except for opers) and cause
them to quit with the given reason

2. +n: Redirect any new users who connect and cause them to quit
during registration

You may use + and - to set or unset these flags in the command, the
default flags are -a+n, which will just redirect new users. The
reason parameter is optional, and if not provided defaults to
'Please use this server/port instead' (the default given in various
numeric lists)">

<helpop key="filter" value="/FILTER [filter-definition] {[action] [flags] {[gline-duration]} :[reason]}

This command will add a filter when more than one parameter is given,
for messages of the types specified by the flags, with the given
filter definition, action, gline duration (when the action is 'gline')
and reason.

The filter will take effect when a message of any type specified by
the flags and matching the definition is sent to the server, and
perform the specified action.

Valid FILTER Actions
--------------------

None    Does nothing
Block   Blocks message and informs +s IRCops of the blocked message
        and all relevant info
Silent  Blocks message, but does not notify IRCops
Kill    Kills the user
Gline   Glines the user for the specified duration

Valid FILTER Flags
------------------

p    Block private and channel messages
n    Block private and channel notices
P    Block part messages
q    Block quit messages
o    Don't match against opers
*    Represents all of the above flags
-    Does nothing, a non-op for when you do not want to specify any
     flags

The reason for the filter will be used as the reason for the action,
unless the ation is 'none', and is sent to the user when their text is
blocked by 'block' and 'silent' actions.

A gline duration may be specified in seconds, or in the format
1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours, 5
minutes and 6 seconds. All fields in this format are optional.

When only one parameter is provided (the filter pattern) the provided
filter will be removed. Note that if you remove a
configuration-defined filter, it will reappear at next rehash unless
it is also removed from the config file.">

<helpop key="ojoin" value="/OJOIN [#chan]

Force joins you to the specified channel, and gives you +Y and any other
configuration-defined modes on it, preventing you from being kicked.
Depending on configuration, may announce that you have joined the
channel on official network business.">

<helpop key="clones" value="/CLONES [limit]

Retrieves a list of users with more clones than the specified
limit.">

<helpop key="check" value="/CHECK [nick|ip|hostmask|channel] {[server]}

Allows opers to look up advanced information on channels, hostmasks
or IP addresses, in a similar way to WHO but in more detail, displaying
most information the IRCD has stored on the target, including all
metadata.

With the second parameter given, runs the command remotely on the
specified server.">

<helpop key="alltime" value="/ALLTIME

Shows the time on all servers on the network.">

<helpop key="rconnect" value="/RCONNECT [source mask] [target mask]

The server matching [source mask] will try to connect to the first
server in the config file matching [target mask].">

<helpop key="rsquit" value="/RSQUIT {[source mask]} [target mask]

Causes a remote server matching [target mask] to be disconnected from
the network, only if connected via a server matching [source mask] if
it is specified.">

<helpop key="globops" value="/GLOBOPS [message]

Sends a message to all users with the +g snomask.">

<helpop key="cban" value="/CBAN [channel] {[duration] :[reason]}

Sets or removes a channel ban. You must specify all three parameters
to add a ban, and one parameter to remove a ban (just the channel).

The duration may be specified in seconds, or in the format
1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
5 minutes and 6 seconds. All fields in this format are optional.">

<helpop key="sajoin" value="/SAJOIN [nick] [channel]

Forces the user to join the channel.">

<helpop key="sapart" value="/SAPART [nick] [channel]

Forces the user to part the channel.">

<helpop key="samode" value="/SAMODE [target] +/-[modes] {[parameters for modes]}

Applies the given mode change to the channel or nick specified.">

<helpop key="sanick" value="/SANICK [nick] [new nick]

Changes the user's nick to the new nick.">

<helpop key="saquit" value="/SAQUIT [nick] [reason]

Forces user to quit with the specified reason.">

<helpop key="setidle" value="/SETIDLE [idle time]

Sets your idle time (in seconds) to the specified value.">

<helpop key="sethost" value="/SETHOST [host]

Sets your host to the specified host.">

<helpop key="setident" value="/SETIDENT [ident]

Sets your ident to the specified ident.">

<helpop key="swhois" line="/SWHOIS [nick] [swhois]

Sets the user's swhois field to the given swhois.">

<helpop key="mkpasswd" value="/MKPASSWD [hashtype] [plaintext]

Encodes the plaintext to a hash of the given type and displays
the result.">

<helpop key="opermotd" value="/OPERMOTD

Redisplays the Oper MOTD.">

<helpop key="nicklock" value="/NICKLOCK [nick] [new nick]

Changes the user's nick to the new nick, and forces
it to remain as such for the remainder of the session.">

<helpop key="nickunlock" value="/NICKUNLOCK [nick]

Allows a previously locked user to change nicks again.">

<helpop key="chghost" value="/CHGHOST [nickname] [new hostname]

Changes the hostname of the user to the new hostname.">

<helpop key="chgname" value="/CHGNAME [nickname] [new name]

Changes the name of the user to the new name.">

<helpop key="chgident" value="/CHGIDENT [nickname] [new ident]

Changes the ident of the user to the new ident.">

<helpop key="shun" value="/SHUN [nick!user@host] {[duration] :[reason]}

Sets or removes a shun (serverside ignore) on a host and ident mask.
You must specify all three parameters to add a shun, and one parameter
to remove a shun (just the nick!user@host section).

The duration may be specified in seconds, or in the format
1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
5 minutes and 6 seconds. All fields in this format are optional.">

<helpop key="die" value="/DIE [password]

This command shuts down the local server. A single parameter is
required, which must match the password in the configuration for the
command to function.">

<helpop key="restart" value="/RESTART [password]

This command restarts down the local server. A single parameter is
required, which must match the password in the configuration for the
command to function.">

<helpop key="commands" value="/COMMANDS

Shows all currently available commands.">

<helpop key="kill" value="/KILL [user] [reason]

This command will disconnect a user from IRC with the given reason.">

<helpop key="rehash" value="/REHASH

This command will cause the server configuration file to be reread and
values reinitialized for all servers matchin the server mask, or the
local server if one is not specified.">

<helpop key="connect" value="/CONNECT [servermask]

Add a connection to the server matching the given servermask. You must
have configured the server for linking in your configuration file
before trying to link them.">

<helpop key="squit" value="/SQUIT [servermask]

Disconnects the server matching the given servermask from this server.">

<helpop key="modules" value="/MODULES

Lists currently loaded modules, their memory offsets, version numbers,
and flags. If you are not an operator, you will see reduced detail.">

<helpop key="loadmodule" value="/LOADMODULE [filename.so]

Loads the specified module into the local server.">

<helpop key="unloadmodule" value="/UNLOADMODULE [filename.so]

Unloads a module from the local server. The module cannot have the
static flag set (see the output of /MODULES).">

<helpop key="reloadmodule" value="/RELOADMODULE [filename.so]

Unloads and reloads a module on the local server. This module cannot
have the static flag set (see the output of /MODULES).">

<helpop key="loadmodule" value="/GLOADMODULE [filename.so]

Loads the specified module on all linked servers.">

<helpop key="unloadmodule" value="/GUNLOADMODULE [filename.so]

Unloads a module from all linked servers. The module cannot have the
static flag set (see the output of /MODULES).">

<helpop key="reloadmodule" value="/GRELOADMODULE [filename.so]

Unloads and reloads a module on all linked servers. This module cannot
have the static flag set (see the output of /MODULES).">

<helpop key="kline" value="/KLINE [user@host] {[duration] :[reason]}

Sets or removes a k-line (local host based ban) on a host and ident mask.
You must specify all three parameters to add a ban, and one parameter
to remove a ban (just the user@host section).

The duration may be specified in seconds, or in the format
1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
5 minutes and 6 seconds. All fields in this format are optional.">

<helpop key="zline" value="/ZLINE [ipmask] {[duration] :[reason]}

Sets or removes a z-line (ip based ban) on an ip range mask.
You must specify all three parameters to add a ban, and one parameter
to remove a ban (just the ipmask).

The duration may be specified in seconds, or in the format
1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
5 minutes and 6 seconds. All fields in this format are optional.">

<helpop key="qline" value="/QLINE [nickmask] {[duration] :[reason]}

Sets or removes a q-line (nick based ban) on a nick mask.
You must specify all three parameters to add a ban, and one parameter
to remove a ban (just the nickmask).

The duration may be specified in seconds, or in the format
1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
5 minutes and 6 seconds. All fields in this format are optional.">

<helpop key="gline" value="/GLINE [user@host] {[duration] :[reason]}

Sets or removes a g-line (host based ban) on host mask.
You must specify all three parameters to add a ban, and one
parameter to remove a ban (just the user@host section).

The duration may be specified in seconds, or in the format
1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
5 minutes and 6 seconds. All fields in this format are optional.">

<helpop key="eline" value="/ELINE [user@host] {[duration] :[reason]}

Sets or removes a e-line (local ban exception) on host mask.
You must specify at least 3 parameters to add an exception, and one
parameter to remove an exception (just the user@host section).

The duration may be specified in seconds, or in the format
1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
5 minutes and 6 seconds. All fields in this format are optional.

This command has a few important limitations. Bans on *@<ip> can only
be negated by an eline on *@<ip>, bans on *@<host> can be negated by
elines on *@<ip>, or *@<host>, and bans on <ident>@* or <ident>@<host>
can be negated by any eline that matches.">

<helpop key="wallops" value="/WALLOPS [message]

Sends a message to all +w users.">

<helpop key="sakick" value="/SAKICK [#chan] [nick] [reason]

Kicks the given user from the specified channel.">

<helpop key="satopic" value="/SATOPIC [#chan] [new topic]

Applies the given topic to the specified channel.">

<helpop key="rline" value="/RLINE [regex] {[duration] :[reason]}

Sets or removes an r-line (regex line) on a n!u@h\\sgecos mask. You
must specify all three parameters to add an rline, and one parameter
to remove an rline (just the regex).

The duration may be specified in seconds, or in the format
1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
5 minutes and 6 seconds. All fields in this format are optional.">

<helpop key="clearcache" value="/CLEARCACHE {servername}

This command clears the DNS cache of the specified server. If no
server is specified, the local server's DNS cache will be cleared.">

<helpop key="reload" value="/RELOAD [core command]

Reloads the specified core command.">

<helpop key="close" value="/CLOSE

Closes all unregistered connections to the local server.">

######################
# User/Channel Modes #
######################

<helpop key="umodes" value="User Modes
----------

 c            Blocks private messages and notices from users who do
              not share a common channel with you (requires
              commonchans module).
 d            Deaf mode. User will not receive any messages or notices
              from channels they are in (requires deaf module).
 g            In combination with /allow, provides for server side
              ignore (requires callerid module).
 h            Marks as 'available for help' in WHOIS (IRCop only,
              requires helpop module).
 i            Makes invisible to /WHO if the user using /WHO is not in
              a common channel.
 k            Prevents the user from being kicked from channels, or
              having op modes removed from them (services only,
              requires servprotect module).
 o            Marks as a IRC operator.
 s [mask]     Receives server notices specified by [mask]
              (IRCop only).
 r            Marks as a having a registered nickname
              (requires services account module).
 w            Receives wallops messages.
 x            Gives a cloaked hostname (requires cloaking module).
 B            Marks as a bot (requires botmode module).
 G            Censors messages sent to the user based on filters
              configured for the network (requires censor module).
 H            Hides an oper's oper status from WHOIS (requires
              hideoper module).
 I            Hides a user's entire channel list in WHOIS from
              non-IRCops (requires hidechans module).
 Q            Makes an operator invisible, preventing users from
              seeing their presence, including in channel user lists
              (IRCop only, requires invisible module).
 R            Blocks private messages from unregistered users
              (requires services account module).
 S            Strips mIRC color/bold/underline codes out of private
              messages to the user (requires stripcolor module).
 W            Receives notification when a user uses WHOIS on them
              (IRCop only, requires showwhois module).">

<helpop key="chmodes" value="Channel Modes
-------------

 v [nickname]       Gives voice to [nickname], allowing them to speak
                    while the channel is +m.
 h [nickname]       Gives halfop status to [nickname] (requires
                    customprefix module).
 o [nickname]       Gives op status to [nickname].
 a [nickname]       Gives protected status to [nickname], preventing
                    them from them from being kicked (+q only,
                    requires customprefix module).
 q [nickname]       Gives owner status to [nickname], preventing them
                    from being kicked (Services or only, requires
                    customprefix module).

 b [hostmask]       Bans [hostmask] from the channel.
 e [hostmask]       Excepts [hostmask] from bans (requires
                    banexception module).
 I [hostmask]       Excepts [hostmask] from +i, allowing matching
                    users to join while the channel is invite-only
                    (requires inviteexception module).

 c                  Blocks messages containing mIRC color codes
                    (requires blockcolor module).
 d [time]           Blocks messages to a channel from new users
                    until they have been in the channel for [time]
                    seconds (requires delaymsg module).
 f [*][lines]:[sec] Kicks on text flood equal to or above the
                    specified rate. With *, the user is banned
                    (requires messageflood module).
 i                  Makes the channel invite-only.
                    Users can only join if an operator
                    uses /INVITE to invite them.
 j [joins]:[sec]    Limits joins to the specified rate (requires
                    joinflood module).
 k [key]            Set the channel key (password) to [key].
 l [limit]          Set the maximum allowed users to [limit].
 m                  Enable moderation. Only users with +v, +h, or +o
                    can speak.
 n                  Blocks users who are not members of the channel
                    from messaging it.
 p                  Make channel private, hiding it in users' whoises
                    and replacing it with * in /LIST.
 r                  Marks the channel as registered with Services
                    (requires services account module).
 s                  Make channel secret, hiding it in users' whoises
                    and /LIST.
 t                  Prevents users without +h or +o from changing the
                    topic.
 u                  Makes the channel an auditorium; normal users only
                    see themselves or themselves and the operators,
                    while operators see all the users (requires
                    auditorium module).
 w [flag]:[banmask] Adds basic channel access controls of [flag] to
                    [banmask], via the +w listmode.
                    For example, +w o:R:Brain will op anyone identified
                    to the account 'Brain' on join.
                    (requires autoop module)
 z                  Blocks non-SSL clients from joining the channel.

 A                  Allows anyone to invite users to the channel
                    (normally only chanops can invite, requires
                    allowinvite module).
 B                  Blocks messages with too many capital letters,
                    as determined by the network configuration
                    (requires blockcaps module).
 C                  Blocks any CTCPs to the channel (requires noctcp
                    module).
 D                  Delays join messages from users until they
                    message the channel (requires delayjoin module).
 E [~*][lines]:[sec]{[:difference]}{[:backlog]} Allows blocking of similiar messages.
                    Kicks as default, blocks with ~ and bans with *
                    The last two parameters are optional.
 F [changes]:[sec]  Blocks nick changes when they equal or exceed the
                    specified rate (requires nickflood module).
 G                  Censors messages to the channel based on the
                    network configuration (requires censor module).
 J [seconds]        Prevents rejoin after kick for the specified
                    number of seconds. This prevents auto-rejoin
                    (requires kicknorejoin module).
 K                  Blocks /KNOCK on the channel.
 L [channel]        If the channel reaches its limit set by +l,
                    redirect users to [channel] (requires redirect
                    module).
 M                  Blocks unregistered users from speaking (requires
                    services account module).
 N                  Prevents users on the channel from chainging nick
                    (requires nonicks module).
 O                  Channel is IRCops only (can only be set by IRCops,
                    requires operchans module).
 P                  Makes the channel permanent; Bans, invites, the
                    topic, modes, and such will not be lost when it
                    empties (can only be set by IRCops, requires
                    permchannels module).
 Q                  Only ulined servers and their users can kick
                    (requires nokicks module)
 R                  Blocks unregistered users from joining (requires
                    services account module).
 S                  Strips mIRC color codes from messages to the
                    channel (requirs stripcolor module).
 T                  Blocks /NOTICEs to the channel from users who are
                    not at least halfop (requires nonotice module).
 
 g [mask]           Blocks messages matching the given blob mask
                    (requires chanfilter module).
 X [mode]           Makes channel operators immune to the specified
                    restrictive mode (requires exemptchanops module).

-------------
NOTE: A large number of these modes are dependent upon server-side modules
being loaded by a server/network administrator. The actual modes available
on your network may be very different to this list. Please consult your
help channel if you have any questions.">

######################
#   Stats Symbols    #
######################

<helpop key="stats" value="/STATS [symbol]

Shows various server statistics. Depending on configuration, some
symbols may be only available to opers.

Valid symbols are:

e  Show e-lines (local ban exemptions)
g  Show g-lines (host bans)
k  Show k-lines (local host bans)
q  Show q-lines (nick mask bans)
Z  Show z-lines (IP mask bans)
R  Show R-lines (regular expression bans)

H  Show shuns
s  Show filters
C  Show channel bans

c  Show link blocks
d  Show configured DNSBLs and related statistics
m  Show command statistics, number of times commands have been used
o  Show a list of all valid oper usernames and hostmasks
p  Show open client ports, and the port type (ssl, plaintext, etc)
u  Show server uptime
z  Show memory usage statistics
i  Show connect class permissions
l  Show all client connections with information (sendq, commands, bytes, time connected)
L  Show all client connections with information and IP address
P  Show online opers and their idle times
T  Show bandwidth/socket statistics
U  Show U-lined servers
Y  Show connection classes
O  Show opertypes and the allowed user and channel modes it can set
E  Show socket engine events
S  Show currently held registered nicknames
G  Show how many local users are connected from each country according to GeoIP

Note that all /STATS use is broadcast to online IRC operators.">

######################
#      SNOMASKS      #
######################

<helpop key="snomasks" value="Server Notice Masks

 a      Allows receipt of local announcement messages.
 A      Allows receipt of remote announcement messages.
 c      Allows receipt of local connect messages.
 C      Allows receipt of remote connect messages.
 d      Allows receipt of general (and sometimes random) debug
        messages.
 f      Allows receipt of flooding notices.
 g      Allows receipt of globops (requires globops module).
 G      Allows receipt of notices of use of oper-override (requires
        override module)
 j      Allows receipt of channel creation notices (requires
        chancreate module).
 J      Allows receipt of remote channel creation notices (requires
        chancreate module).
 k      Allows receipt of local kill messages.
 K      Allows receipt of remote kill messages.
 l      Allows receipt of local linking related
        messages.
 L      Allows receipt of remote linking related
        messages.
 n      See local nickname changes (requires seenicks module).
 N      See remote nickname changes (requires seenicks modules).
 o      Allows receipt of oper-up, oper-down, and oper-failure
        messages.
 O      Allows receipt of remote oper-up, oper-down, and oper-failure
        messages.
 q      Allows receipt of local quit messages.
 Q      Allows receipt of remote quit messages.
 t      Allows receipt of attempts to use /STATS (local and remote).
 v      Allows receipt of oper-override notices (requires override module).
 x      Allows receipt of Xline notices (g/z/q/k/e/R/shuns).">

######################
#      EXTBANS       #
######################

<helpop key="extbans" value="Extended Bans
----------

Extbans are split into two types; matching extbans, which match on
users in additional ways, and acting extbans, which restrict users
in different ways to a standard ban.

To use an extban, simply set +b <ban> or +e <ban> with it as the ban,
instead of a normal nick!user@host mask, to ban or exempt matching
users. Ban exceptions on acting extbans exempt that user from matching
an extban of that type, and from any channel mode corresponding to the
restriction. Matching extbans may also be used for invite exceptions by
setting +I <extban>.

Matching extbans:

 j:#channel    Matches anyone in #channel. Does not support wildcards
               for #channel (requires channelban module).
 r:realname    Matches users with a matching realname (requires gecosban
               module).
 s:server      Matches users on a matching server (requires serverban
               module).
 z:fingerprint Matches users with a matching ssl fingerprint (requires
               sslmodes module)
 O:opertype    Matches IRCops of a matching type, mostly useful as an
               an invite exception (requires operchans module).
 R:account     Matches users logged into a matching account (requires
               services account module).

Acting extbans:

 c:<ban>       Blocks any messages that contain color codes from
               matching users (requires blockcolor module).
 m:<ban>       Blocks messages from matching users (requires muteban
               module). Users with +v or above are not affected.
 p:<ban>       Blocks part messages from matching users (requires
               nopartmsg module).
 A:<ban>       Blocks invites by matching users even when +A is set
               (requires allowinvite module).
 B:<ban>       Blocks all capital or nearly all capital messages from
               matching users (requires blockcaps module).
 C:<ban>       Blocks CTCPs from matching users (requires noctcp
               module).
 N:<ban>       Blocks nick changes from matching users (requires
               nonicks module).
 Q:<ban>       Blocks kicks by matching users (requires nokicks
               module).
 S:<ban>       Strips color/bold/underline from messages from matching
               users (requires stripcolor module).
 T:<ban>       Blocks notices from matching users (requires nonotice
               module).
 U:<ban>       Blocks unregistered users matching the given ban.
               (requires m_services_account)

A ban given to an acting extban may either be a nick!user@host mask,
matched against users as for a normal ban, or a matching extban.

There is an additional special type of extended ban, a redirect ban:

 Redirect      n!u@h#channel will redirect the banned user to #channel
               when they try to join (requires banredirect module).">