1 ########################################################################
3 # ___ ___ ____ ____ _ #
4 # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
5 # | || '_ \/ __| '_ \| || |_) | | / _` | #
6 # | || | | \__ \ |_) | || _ <| |__| (_| | #
7 # |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
10 # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
11 # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
12 # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
13 # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
16 ##################################||####################################
18 ##################################||####################################
20 # This is an example of the config file for InspIRCd. #
21 # Change the options to suit your network. #
24 # ____ _ _____ _ _ ____ _ _ _ #
25 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
26 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
27 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
28 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
30 # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
31 # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
32 # if you've configured InspIRCd before, these probably indicate #
33 # something new or different to this version and you SHOULD READ IT. #
35 ########################################################################
37 #-#-#-#-#-#-#-#-#-# CONFIGURATION FORMAT #-#-#-#-#-#-#-#-#-#-#-#-#-#-
39 # In order to maintain compatibility with older configuration files, #
40 # you can change the configuration parser to parse as it did in #
41 # previous releases. When using the "compat" format, you need to use #
42 # C++ escape sequences (e.g. \n) instead of XML ones (e.g. &nl;) and #
43 # can not use <define> to create macros. #
44 #<config format="compat">
46 #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
48 # This optional tag allows you to include another config file #
49 # allowing you to keep your configuration tidy. The configuration #
50 # file you include will be treated as part of the configuration file #
51 # which includes it, in simple terms the inclusion is transparent. #
53 # All paths to config files are relative to the directory that the #
56 # You may also include an executable file, in which case if you do so #
57 # the output of the executable on the standard output will be added #
58 # to your config at the point of the include tag. #
60 # Syntax is as follows: #
61 #<include file="file.conf"> #
62 #<include executable="/path/to/executable parameters"> #
64 # Executable include example: #
65 #<include executable="/usr/bin/wget -q -O - https://example.com/inspircd.conf">
69 #-#-#-#-#-#-#-#-#-#-#-# VARIABLE DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
71 # You can define variables that will be substituted later in the #
72 # configuration file. This can be useful to allow settings to be #
73 # easily changed, or to parameterize a remote includes. #
75 # Variables may be redefined and may reference other variables. #
76 # Value expansion happens at the time the tag is read. #
77 <define name="bindip" value="1.2.2.3">
78 <define name="localips" value="&bindip;/24">
80 #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
82 # Here is where you enter the information about your server. #
86 # name: Hostname of your server. Does not need to resolve, but
87 # does need to be correct syntax (something.somethingelse.tld).
88 name="penguin.omega.example.org"
90 # description: Server description. Spaces are allowed.
91 description="Waddle World"
93 # id: The SID to use for this server. This should not be uncommented
94 # unless there is a SID conflict. This must be three characters long.
95 # The first character must be a digit [0-9], the remaining two chars
96 # may be letters [A-Z] or digits.
99 # network: Network name given on connect to clients.
100 # Should be the same on all servers on the network.
104 #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
106 # Describes the Server Administrator's real name (optionally), #
107 # nick, and email address. #
112 name="Johnny English"
114 # nick: Nickname (preferably what you use on the network)
117 # email: email address. Does not have to be valid
118 # but should be for the users to be able to contact you.
119 email="MI5@the.best.secret.agent">
122 #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
124 # Enter the port and address bindings here. #
127 # ____ _ _____ _ _ ____ _ _ _ #
128 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
129 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
130 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
131 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
133 # If you want to link servers to InspIRCd you must load the #
134 # spanningtree module! Please see the modules list for #
135 # information on how to load this module! If you do not load this #
136 # module, server ports will NOT work! #
139 # address: IP address to bind to if the box that you are hosting
140 # on has more than one IP, else the ircd will try to bind to all
141 # IP's on the box if this is not defined.
144 # port: Port for users or servers to be able to connect to.
145 # you can select multiple ports by separating them
146 # with a - character like the example below.
149 # type: Type of bind block this is. It can either be clients or
150 # servers. Whichever you select will be the only type able to connect
151 # to this bind section.
154 # ssl: If you want the port(s) in this bind tag to use SSL, set this to
155 # the name of a custom <sslprofile> tag that you have defined or one
156 # of "openssl", "gnutls", "mbedtls" if you have not defined any. See the
157 # docs page for the SSL module you are using for more details.
159 # You will need to load the ssl_openssl module for OpenSSL, ssl_gnutls
160 # for GnuTLS and ssl_mbedtls for mbedTLS.
163 # defer: When this is non-zero, connections will not be handed over to
164 # the daemon from the operating system before data is ready.
165 # In Linux, the value indicates the time period we'll wait for a
166 # connection to come up with data. Don't set it too low!
167 # In BSD the value is ignored; only zero and non-zero is possible.
168 # Windows ignores this parameter completely.
169 # Note: This does not take effect on rehash.
170 # To change it on a running bind, you'll have to comment it out,
171 # rehash, comment it in and rehash again.
174 # free: When this is enabled the listener will be created regardless of
175 # whether the interface that provides the bind address is available. This
176 # is useful for if you are starting InspIRCd on boot when the server may
177 # not have brought the network interfaces up yet.
181 <bind address="" port="6660-6669" type="clients">
183 # Listener accepting HTML5 WebSocket connections.
184 # Requires the websocket module and SHA-1 hashing support (provided by the sha1
186 #<bind address="" port="7002" type="clients" hook="websocket">
188 # EXPERIMENTAL: Listener that binds on a UNIX endpoint instead of a TCP/IP endpoint:
189 #<bind path="/tmp/inspircd.sock" type="clients">
191 # You can define a custom <sslprofile> tag which defines the SSL configuration
192 # for this listener. See the docs page for the SSL module you are using for
195 # Alternatively, you can use one of the default SSL profiles which are created
196 # when you have not defined any:
197 # "openssl" (requires the ssl_openssl module)
198 # "gnutls" (requires the ssl_gnutls module)
199 # "mbedtls" (requires the ssl_mbedtls module)
201 # When linking servers, the OpenSSL, GnuTLS, and mbedTLS implementations are
202 # completely link-compatible and can be used alongside each other on each end
203 # of the link without any significant issues.
205 <bind address="" port="7000,7001" type="servers">
206 <bind address="1.2.3.4" port="7005" type="servers" ssl="openssl">
209 #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
211 # This is where you can configure which connections are allowed #
212 # and denied access onto your server. The password is optional. #
213 # You may have as many of these as you require. To allow/deny all #
214 # connections, use a '*' or 0.0.0.0/0. #
216 # -- It is important to note that connect tags are read from the -- #
217 # TOP DOWN. This means that you should have more specific deny #
218 # and allow tags at the top, progressively more general, followed #
219 # by a <connect allow="*"> (should you wish to have one). #
221 # Connect blocks are searched twice for each user - once when the TCP #
222 # connection is accepted, and once when the user completes their #
223 # registration. Most of the information (hostname, ident response, #
224 # password, SSL when using STARTTLS, etc) is only available during #
225 # the second search, so if you are trying to make a closed server, #
226 # you will probably need a connect block just for user registration. #
227 # This can be done by using <connect registered="no"> #
230 # deny: Will not let people connect if they have specified host/IP.
233 # connect:reason is the message that users will see if they match a deny block
234 <connect deny="3ffe::0/32" reason="The 6bone address space is deprecated">
237 # name: Name to use for this connect block. Mainly used for
238 # connect class inheriting.
241 # parent: This setting is to specify if this connect class
242 # inherits settings from any other. Put the other class's name
243 # in here to use its settings as a template - for example, if
244 # you only want to adjust sendq and a password
247 # allow: The IP address or hostname of clients that can use this
248 # class. You can specify either an exact match, a glob match, or
252 # hash: the hash function this password is hashed with. Requires the
253 # module for the selected function (bcrypt, md5, sha1, or sha256) and
254 # the password hashing module (password_hash) to be loaded.
256 # You may also use any of the above other than bcrypt prefixed with
257 # either "hmac-" or "pbkdf2-hmac-" (requires the pbkdf2 module).
258 # Create hashed passwords with: /MKPASSWD <hashtype> <plaintext>
261 # password: Password to use for this block/user(s)
264 # maxchans: Maximum number of channels a user in this class
268 # timeout: How long the server will wait before disconnecting
269 # a user if they do not do anything on connect.
270 # (Note, this is a client-side thing, if the client does not
271 # send /NICK, /USER or /PASS)
274 # localmax: Maximum local connections per IP (or CIDR mask, see below).
277 # globalmax: Maximum global (network-wide) connections per IP (or CIDR mask, see below).
280 # maxconnwarn: Enable warnings when localmax or globalmax are reached (defaults to on)
283 # resolvehostnames: If disabled, no DNS lookups will be performed on connecting users
284 # in this class. This can save a lot of resources on very busy servers.
285 resolvehostnames="yes"
287 # usednsbl: Defines whether or not users in this class are subject to DNSBL. Default is yes.
288 # This setting only has effect when the dnsbl module is loaded.
291 # useident: Defines if users in this class MUST respond to a ident query or not.
294 # usests: Whether a STS policy should be advertised to users in this class.
295 # This setting only has effect when the ircv3_sts module is loaded.
298 # webirc: Restricts usage of this class to the specified WebIRC gateway.
299 # This setting only has effect when the cgiirc module is loaded.
302 # limit: How many users are allowed in this class
305 # modes: User modes that are set on users in this block on connect.
306 # Enabling this option requires that the conn_umodes module be loaded.
307 # This entry is highly recommended to use for/with IP cloaking/masking.
308 # For the example to work, this also requires that the cloaking
309 # module be loaded as well.
312 # requireident: Require that users of this block have a valid ident response.
313 # Requires the ident module to be loaded.
316 # requiressl: Require that users of this block use an SSL connection.
317 # This can also be set to "trusted", as to only accept certificates
318 # issued by a certificate authority that you can configure in the
319 # settings of the SSL module that you're using.
320 # Requires the sslinfo module to be loaded.
323 # requireaccount: Require that users of this block have authenticated to a
325 # NOTE: You must complete the signon prior to full connection. Currently,
326 # this is only possible by using SASL authentication; passforward
327 # and PRIVMSG NickServ happen after your final connect block has been found.
328 # Requires the services_account module to be loaded.
329 #requireaccount="yes"
331 # Alternate MOTD file for this connect class. The contents of this file are
332 # specified using <files secretmotd="filename"> or <execfiles ...>
334 # NOTE: the following escape sequences for IRC formatting characters can be
337 # Color: \c<fg>[,<bg>]
339 # Monospace: \m (not widely supported)
342 # Strikethrough: \s (not widely supported)
344 # See https://defs.ircdocs.horse/info/formatting.html for more information
345 # on client support for formatting characters.
348 # port: What port range this user is allowed to connect on. (optional)
349 # The ports MUST be set to listen in the bind blocks above.
353 # name: Name to use for this connect block. Mainly used for
354 # connect class inheriting.
357 # allow: The IP address or hostname of clients that can use this
358 # class. You can specify either an exact match, a glob match, or
362 # maxchans: Maximum number of channels a user in this class
366 # timeout: How long the server will wait before disconnecting
367 # a user if they do not do anything on connect.
368 # (Note, this is a client-side thing, if the client does not
369 # send /NICK, /USER or /PASS)
372 # pingfreq: How often the server tries to ping connecting clients.
375 # hardsendq: maximum amount of data allowed in a client's send queue
376 # before they are dropped. Keep this value higher than the length of
377 # your network's /LIST or /WHO output, or you will have lots of
378 # disconnects from sendq overruns!
379 # Setting this to "1M" is equivalent to "1048576", "8K" is 8192, etc.
382 # softsendq: amount of data in a client's send queue before the server
383 # begins delaying their commands in order to allow the sendq to drain
386 # recvq: amount of data allowed in a client's queue before they are dropped.
387 # Entering "10K" is equivalent to "10240", see above.
390 # threshold: This specifies the amount of command penalty a user is allowed to have
391 # before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
392 # ones such as /OPER have penalties up to 10.
394 # If you are not using fakelag, this should be at least 20 to avoid excess flood kills
395 # from processing some commands.
398 # commandrate: This specifies the maximum rate that commands can be processed.
399 # If commands are sent more rapidly, the user's penalty will increase and they will
400 # either be fakelagged or killed when they reach the threshold
402 # Units are millicommands per second, so 1000 means one line per second.
405 # fakelag: Use fakelag instead of killing users for excessive flood
407 # Fake lag stops command processing for a user when a flood is detected rather than
408 # immediately killing them; their commands are held in the recvq and processed later
409 # as the user's command penalty drops. Note that if this is enabled, flooders will
410 # quit with "RecvQ exceeded" rather than "Excess Flood".
413 # localmax: Maximum local connections per IP.
416 # globalmax: Maximum global (network-wide) connections per IP.
419 # resolvehostnames: If disabled, no DNS lookups will be performed on connecting users
420 # in this class. This can save a lot of resources on very busy servers.
421 resolvehostnames="yes"
423 # useident: Defines if users in this class must respond to a ident query or not.
426 # usests: Whether a STS policy should be advertised to users in this class.
427 # This setting only has effect when the ircv3_sts module is loaded.
430 # limit: How many users are allowed in this class
433 # modes: User modes that are set on users in this block on connect.
434 # Enabling this option requires that the conn_umodes module be loaded.
435 # This entry is highly recommended to use for/with IP cloaking/masking.
436 # For the example to work, this also requires that the cloaking
437 # module be loaded as well.
441 #-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
443 # CIDR configuration allows detection of clones and applying of #
444 # throttle limits across a CIDR range. (A CIDR range is a group of #
445 # IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
446 # represented as 192.168.1.0/24). This means that abuse across an ISP #
447 # is detected and curtailed much easier. Here is a good chart that #
448 # shows how many IPs the different CIDRs correspond to: #
449 # https://en.wikipedia.org/wiki/IPv4_subnetting_reference #
450 # https://en.wikipedia.org/wiki/IPv6_subnetting_reference #
454 # ipv4clone: specifies how many bits of an IP address should be
455 # looked at for clones. The default only looks for clones on a
456 # single IP address of a user. You do not want to set this
457 # extremely low. (Values are 0-32).
460 # ipv6clone: specifies how many bits of an IP address should be
461 # looked at for clones. The default only looks for clones on a
462 # single IP address of a user. You do not want to set this
463 # extremely low. (Values are 0-128).
466 # This file has all the information about oper classes, types and o:lines.
467 # You *MUST* edit it.
468 <include file="examples/opers.conf.example">
470 # This file has all the information about server links and ulined servers.
471 # You *MUST* edit it if you intend to link servers.
472 <include file="examples/links.conf.example">
474 #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
477 # Files block - contains files whose contents are used by the ircd
479 # motd - displayed on connect and when a user executes /MOTD
480 # Modules can also define their own files
481 <files motd="examples/motd.txt.example">
483 # Example of an executable file include. Note this will be read on rehash,
484 # not when the command is run.
485 #<execfiles motd="wget -O - https://www.example.com/motd.txt">
487 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
488 # If these values are not defined, InspIRCd uses the default DNS resolver
492 # server: DNS server to use to attempt to resolve IP's to hostnames.
493 # in most cases, you won't need to change this, as inspircd will
494 # automatically detect the nameserver depending on /etc/resolv.conf
495 # (or, on Windows, your set nameservers in the registry.)
496 # Note that this must be an IP address and not a hostname, because
497 # there is no resolver to resolve the name until this is defined!
501 # timeout: time to wait to try to resolve DNS/hostname.
504 # An example of using an IPv6 nameserver
505 #<dns server="::1" timeout="5">
507 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
509 # Define the path to the PID file here. The PID file can be used to #
510 # rehash the ircd from the shell or to terminate the ircd from the #
511 # shell using shell scripts, perl scripts, etc... and to monitor the #
512 # ircd's state via cron jobs. If this is a relative path, it will be #
513 # relative to the configuration directory, and if it is not defined, #
514 # the default of 'inspircd.pid' is used. #
517 #<pid file="/path/to/inspircd.pid">
519 #-#-#-#-#-#-#-#-#-#-#-#-#- LIST MODE LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#
521 # The <maxlist> tag is used customise the maximum number of each list #
522 # mode that can be set on a channel. #
523 # The tags are read from top to bottom and the list mode limit from #
524 # the first tag found which matches the channel name and mode type is #
525 # applied to that channel. #
526 # It is advisable to put an entry with the channel as '*' at the #
527 # bottom of the list. If none are specified or no maxlist tag is #
528 # matched, the banlist size defaults to 100 entries. #
531 # Allows #largechan to have up to 200 ban entries.
532 #<maxlist mode="ban" chan="#largechan" limit="200">
534 # Allows #largechan to have up to 200 ban exception entries.
535 #<maxlist mode="e" chan="#largechan" limit="200">
537 # Allows all channels and list modes not previously matched to have
539 <maxlist chan="*" limit="100">
541 #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
543 # Settings to define which features are usable on your server. #
547 # prefixquit: What (if anything) users' quit messages
548 # should be prefixed with.
551 # suffixquit: What (if anything) users' quit messages
552 # should be suffixed with.
555 # prefixpart: What (if anything) users' part messages
556 # should be prefixed with.
558 # NOTE: Use "\"" instead of """ if not using <config format="xml">
560 # suffixpart: What (if anything) users' part message
561 # should be suffixed with.
564 # fixedquit: Set all users' quit messages to this value.
567 # fixedpart: Set all users' part messages in all channels
571 # syntaxhints: If enabled, if a user fails to send the correct parameters
572 # for a command, the ircd will give back some help text of what
573 # the correct parameters are.
576 # casemapping: This sets the case mapping method to be used by the
577 # server. This MUST be the same on all servers. Possible values are:
578 # "ascii" (recommended)
579 # "rfc1459" (default, required for linking to 2.0 servers)
580 # NOTE: if you are using the nationalchars module this setting will be
581 # ignored. You should use <nationalchars:casemapping> instead.
584 # cyclehostsfromuser: If enabled, the source of the mode change for
585 # cyclehosts will be the user who cycled. This can look nicer, but
586 # triggers anti-takeover mechanisms of some obsolete bots.
587 cyclehostsfromuser="no"
589 # announcets: If set to yes, when the timestamp on a channel changes, all users
590 # in the channel will be sent a NOTICE about it.
593 # allowmismatch: Setting this option to yes will allow servers to link even
594 # if they don't have the same "optionally common" modules loaded. Setting this to
595 # yes may introduce some desyncs and unwanted behaviour.
598 # defaultbind: Sets the default for <bind> tags without an address. Choices are
599 # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
600 # falling back to IPv4 otherwise.
603 # hostintopic: If enabled, channels will show the host of the topic setter
604 # in the topic. If set to no, it will only show the nick of the topic setter.
607 # pingwarning: If a server does not respond to a ping within this period,
608 # it will send a notice to opers with snomask +l informing that the server
609 # is about to ping timeout.
612 # serverpingfreq: How often pings are sent between servers.
615 # splitwhois: Whether to split private/secret channels from normal channels
616 # in WHOIS responses. Possible values for this are:
617 # 'no' - list all channels together in the WHOIS response regardless of type.
618 # 'split' - split private/secret channels to a separate WHOIS response numeric.
619 # 'splitmsg' - the same as split but also send a message explaining the split.
622 # defaultmodes: What modes are set on a empty channel when a user
623 # joins it and it is unregistered.
626 # xlinemessage: This is the text that is sent to a user when they are
627 # banned from the server.
628 xlinemessage="You're banned! Email irc@example.com with the ERROR line below for help."
630 # allowzerolimit: If enabled then allow a limit of 0 to be set on channels.
631 # This is non-standard behaviour and should only be enabled if you need to
632 # link with servers running 2.0. Defaults to yes.
635 # exemptchanops: Allows users with with a status mode to be exempt
636 # from various channel restrictions. Possible restrictions are:
637 # - anticaps Channel mode +B - blocks messages with too many capital
638 # letters (requires the anticaps module).
639 # - auditorium-see Permission required to see the full user list of
640 # a +u channel (requires the auditorium module).
641 # - auditorium-vis Permission required to be visible in a +u channel
642 # (requires the auditorium module).
643 # - blockcaps Channel mode +B - blocks messages with too many capital
644 # letters (requires the blockcaps module).
645 # - blockcolor Channel mode +c - blocks messages with formatting codes
646 # (requires the blockcolor module).
647 # - censor Channel mode +G - censors messages based on the network
648 # configuration (requires the censor module).
649 # - filter Channel mode +g - blocks messages containing the given
650 # glob mask (requires the chanfilter module).
651 # - flood Channel mode +f - kicks (and bans) on text flood of a
652 # specified rate (requires the messageflood module).
653 # - nickflood Channel mode +F - blocks nick changes after a specified
654 # rate (requires the nickflood module).
655 # - noctcp Channel mode +C - blocks any CTCPs to the channel
656 # (requires the noctcp module).
657 # - nonick Channel mode +N - prevents users on the channel from
658 # changing nicks (requires the nonicks module).
659 # - nonotice Channel mode +T - blocks /NOTICEs to the channel
660 # (requires the nonotice module).
661 # - regmoderated Channel mode +M - blocks unregistered users from
662 # speaking (requires the services account module).
663 # - stripcolor Channel mode +S - strips formatting codes from
664 # messages (requires the stripcolor module).
665 # - topiclock Channel mode +t - limits changing the topic to (half)ops
666 # You can also configure this on a per-channel basis with a channel mode.
667 # See m_exemptchanops in modules.conf.example for more details.
668 exemptchanops="censor:o filter:o nickflood:o nonick:v regmoderated:o"
670 # invitebypassmodes: This allows /INVITE to bypass other channel modes.
671 # (Such as +k, +j, +l, etc.)
672 invitebypassmodes="yes"
674 # nosnoticestack: This prevents snotices from 'stacking' and giving you
675 # the message saying '(last message repeated X times)'. Defaults to no.
679 #-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
683 # netbuffersize: Size of the buffer used to receive data from clients.
684 # The ircd may only read this amount of text in 1 go at any time.
685 netbuffersize="10240"
687 # somaxconn: The maximum number of connections that may be waiting
688 # in the accept queue. This is *NOT* the total maximum number of
689 # connections per server. Some systems may only allow this to be up
690 # to 5, while others (such as Linux and *BSD) default to 128.
691 # Setting this above the limit imposed by your OS can have undesired
695 # softlimit: This optional feature allows a defined softlimit for
696 # connections. If defined, it sets a soft max connections value.
699 # clonesonconnect: If this is set to false, we won't check for clones
700 # on initial connection, but only after the DNS check is done.
701 # This can be useful where your main class is more restrictive
702 # than some other class a user can be assigned after DNS lookup is complete.
703 # Turning this option off will make the server spend more time on users we may
704 # potentially not want. Normally this should be neglible, though.
705 # Default value is true
706 clonesonconnect="true"
708 # timeskipwarn: The time period that a server clock can jump by before
709 # operators will be warned that the server is having performance issues.
712 # quietbursts: When syncing or splitting from a network, a server
713 # can generate a lot of connect and quit messages to opers with
714 # +C and +Q snomasks. Setting this to yes squelches those messages,
715 # which makes it easier for opers, but degrades the functionality of
716 # bots like BOPM during netsplits.
719 #-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
723 # allowcoreunload: If this value is set to yes, Opers will be able to
724 # unload core modules (e.g. core_privmsg).
727 # announceinvites: This option controls which members of the channel
728 # receive an announcement when someone is INVITEd. Available values:
729 # 'none' - don't send invite announcements
730 # 'all' - send invite announcements to all members
731 # 'ops' - send invite announcements to ops and higher ranked users
732 # 'dynamic' - send invite announcements to halfops (if available) and
733 # higher ranked users. This is the recommended setting.
734 announceinvites="dynamic"
736 # hideulines: If this value is set to yes, U-lined servers will
737 # be hidden from non-opers in /LINKS and /MAP.
740 # flatlinks: If this value is set to yes, /MAP and /LINKS will
741 # be flattened when shown to non-opers.
744 # hideserver: When defined, the given text will be used in place
745 # of the server name in public messages. As with <server:name> this
746 # does not need to resolve but does need to be a valid hostname.
748 # NOTE: enabling this will cause users' idle times to only be shown
749 # when a remote whois (/WHOIS <nick> <nick>) is used.
750 #hideserver="*.example.com"
752 # hidebans: If this value is set to yes, when a user is banned ([KGZ]-lined)
753 # only opers will see the ban message when the user is removed
757 # hidekills: If defined, replaces who executed a /KILL with a custom string.
760 # hideulinekills: Hide kills from clients of ulined servers from server notices.
763 # hidesplits: If enabled, non-opers will not be able to see which
764 # servers split in a netsplit, they will only be able to see that one
765 # occurred (If their client has netsplit detection).
768 # maxtargets: Maximum number of targets per command.
769 # (Commands like /NOTICE, /PRIVMSG, /KICK, etc)
772 # customversion: A custom message to be displayed in the comments field
773 # of the VERSION command response. This does not hide the InspIRCd version.
776 # runasuser: If this is set, InspIRCd will attempt to switch
777 # to run as this user, which allows binding of ports under 1024.
778 # You should NOT set this unless you are starting as root.
779 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
782 # runasgroup: If this is set, InspIRCd will attempt to switch
783 # to run as this group, which allows binding of ports under 1024.
784 # You should NOT set this unless you are starting as root.
785 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
788 # restrictbannedusers: If this is set to yes, InspIRCd will not allow users
789 # banned on a channel to change nickname or message channels they are
790 # banned on. This can also be set to silent to restrict the user but not
792 restrictbannedusers="yes"
794 # genericoper: Setting this value to yes makes all opers on this server
795 # appear as 'is a server operator' in their WHOIS, regardless of their
796 # oper type, however oper types are still used internally. This only
797 # affects the display in WHOIS.
800 # userstats: /STATS commands that users can run (opers can run all).
803 #-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
805 # This configuration tag defines the maximum sizes of various types #
806 # on IRC, such as the maximum length of a channel name, and the #
807 # maximum length of a channel. Note that with the exception of the #
808 # identmax value all values given here are the exact values you would #
809 # expect to see on IRC. This contrasts with the older InspIRCd #
810 # releases where these values would be one character shorter than #
811 # defined to account for a null terminator on the end of the text. #
813 # These values should match network-wide otherwise issues will occur. #
815 # The highest safe value you can set any of these options to is 500, #
816 # but it is recommended that you keep them somewhat #
817 # near their defaults (or lower). #
820 # maxnick: Maximum length of a nickname.
823 # maxchan: Maximum length of a channel name.
826 # maxmodes: Maximum number of mode changes per line.
829 # maxident: Maximum length of a ident/username.
832 # maxhost: Maximum length of a hostname.
835 # maxquit: Maximum length of a quit message.
838 # maxtopic: Maximum length of a channel topic.
841 # maxkick: Maximum length of a kick message.
844 # maxreal: Maximum length of a real name.
847 # maxaway: Maximum length of an away message.
850 #-#-#-#-#-#-#-#-#-#-#-#-# PATHS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
852 # This configuration tag defines the location that InspIRCd stores #
853 # various types of files such as configuration files, log files and #
854 # modules. You will probably not need to change these from the values #
855 # set when InspIRCd was built unless you are using a binary package #
856 # where you do not have the ability to set build time configuration. #
857 #<path configdir="conf" datadir="data" logdir="logs" moduledir="modules">
859 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
863 # Logging is covered with the <log> tag, which you may use to change
864 # the behaviour of the logging of the IRCd.
866 # An example log tag would be:
867 # <log method="file" type="OPER" level="default" target="opers.log">
868 # which would log all information on /OPER (failed and successful) to
869 # a file called opers.log.
871 # There are many different types which may be used, and modules may
872 # generate their own. A list of useful types:
873 # - USERS - information relating to user connection and disconnection
874 # - OPER - succesful and failed oper attempts
875 # - KILL - kill related messages
876 # - FILTER - messages related to filter matches (filter module)
877 # - CONFIG - configuration related messages
878 # - COMMAND - die and restart messages, and messages related to unknown user types
879 # - SOCKET - socket engine informational/error messages
880 # - MODULE - module related messages
881 # - STARTUP - messages related to starting up the server
883 # You may also log *everything* by using a type of *, and subtract things out
884 # of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
887 # - default (general messages, including errors)
888 # - sparse (misc error messages)
889 # - debug (debug messages)
891 # Some types only produce output in the debug level, those are:
892 # - BANCACHE - ban cache debug messages
893 # - CHANNELS - information relating to joining/creating channels
894 # - CULLLIST - debug messages related to issues with removing users
895 # - RESOLVER - DNS related debug messages
896 # - CONNECTCLASS - Connection class debug messages
900 # If your server is producing a high levels of log messages you can also set the
901 # flush="[positive number]" attribute to specify how many log messages should be
902 # buffered before flushing to disk. You should probably not specify this unless
903 # you are having problems.
905 # The following log tag is highly default and uncustomised. It is recommended you
906 # sort out your own log tags. This is just here so you get some output.
908 <log method="file" type="* -USERINPUT -USEROUTPUT" level="default" target="ircd.log">
910 #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
912 # This tag lets you define the behaviour of the /WHOWAS command of #
917 # groupsize: Maximum entries per nick shown when performing
921 # maxgroups: Maximum number of nickgroups that can be added to
922 # the list so that /WHOWAS does not use a lot of resources on
926 # maxkeep: Maximum time a nick is kept in the whowas list
927 # before being pruned. Time may be specified in seconds,
928 # or in the following format: 1y2w3d4h5m6s. Minimum is
932 #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
934 # The ban tags define nick masks, host masks and ip ranges which are #
935 # banned from your server. All details in these tags are local to #
940 # ipmask: IP range to ban. Wildcards and CIDR can be used.
943 # reason: Reason to display when user is disconnected.
944 reason="No porn here thanks.">
947 # nick: Nick to disallow. Wildcards are supported.
950 # reason: Reason to display on /NICK.
951 reason="Reserved for a network service">
954 # host: ident@hostname to ban.
955 # Wildcards and CIDR (if you specify an IP) can be used.
956 host="*@banneduser.example.net"
958 # reason: Reason to display when user is disconnected
959 reason="Evading Bans">
961 <badhost host="root@*" reason="Don't IRC as root!">
962 <badhost host="*@198.51.100.0/24" reason="This subnet is bad.">
964 # exception: Hosts that are exempt from [KGZ]-lines.
966 # host: ident@hostname to exempt.
967 # Wildcards and CIDR (if you specify an IP) can be used.
968 host="*@serverop.example.com"
970 # reason: Reason for exception. Only shown in /STATS e.
971 reason="Oper's hostname">
973 #-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
975 # This optional tag allows you to specify how wide a G-line, E-line, #
976 # K-line, Z-line or Q-line can be before it is forbidden from being #
977 # set. By setting hostmasks="yes", you can allow all G-, K-, E-lines, #
978 # no matter how many users the ban would cover. This is not #
979 # recommended! By setting ipmasks="yes", you can allow all Z-lines, #
980 # no matter how many users these cover too. Needless to say we #
981 # don't recommend you do this, or, set nickmasks="yes", which will #
982 # allow any Q-line. #
986 # hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
989 # ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
992 # nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
995 # trigger: What percentage of users on the network to trigger
996 # specifying an insane ban as. The default is 95.5%, which means
997 # if you have a 1000 user network, a ban will not be allowed if it
998 # will be banning 955 or more users.
1001 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1002 # ____ _ _____ _ _ ____ _ _ _ #
1003 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
1004 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
1005 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
1006 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
1008 # Well done, you've reached the end of the basic configuration, your #
1009 # ircd should now start if you want to try it out! (./inspircd start) #
1011 # We now suggest you read and edit modules.conf, as modules are what #
1012 # provide almost all the features of InspIRCd. :) #
1014 # The default does nothing -- we include it for simplicity for you. #
1015 <include file="examples/modules.conf.example">
1017 #-#-#-#-#-#-#-#-#-#-#-# SERVICES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
1019 # If you use services you will probably want to include one of the #
1020 # following files which set up aliases, nick reservations and filter #
1021 # exemptions for services pseudoclients: #
1023 # Anope users should uncomment this:
1024 #<include file="examples/services/anope.conf.example">
1026 # Atheme users should uncomment this:
1027 #<include file="examples/services/atheme.conf.example">
1029 # Users of other services should uncomment this:
1030 #<include file="examples/services/generic.conf.example">
1032 #########################################################################
1034 # - InspIRCd Development Team - #
1035 # https://www.inspircd.org #
1037 #########################################################################