1 <module name="m_md5.so">
2 <module name="m_sha256.so">
3 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
4 # Alias module: Allows you to define server-side command aliases
5 <module name="m_alias.so">
6 <fantasy prefix="!" allowbots="no">
8 <alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
9 <alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
10 <alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
11 <alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
12 <alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
13 <alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
14 <alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
15 <alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
16 <alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
17 <alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
18 <alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
19 <alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
21 # An example of using the format value to create an alias with two
22 # different behaviours depending on the format of the parameters.
24 #<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
25 # requires="ChanServ" uline="yes">
27 #<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
28 # requires="NickServ" uline="yes">
30 # This alias fixes a glitch in xchat 2.6.x and above and the way it
31 # assumes IDENTIFY must be prefixed by a colon (:) character. It should
32 # be placed ABOVE the default NICKSERV alias (the first example) listed
35 #<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
36 # requires="NickServ" uline="yes">
38 <module name="m_allowinvite.so">
39 <module name="m_alltime.so">
40 <module name="m_auditorium.so">
41 <auditorium showops="yes" operoverride="yes">
42 <module name="m_banexception.so">
43 <module name="m_blockcaps.so">
44 <blockcaps percent="50"
46 capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
47 <module name="m_blockcolor.so">
48 <module name="m_botmode.so">
49 <module name="m_censor.so">
50 <include file="inspircd.censor.example">
52 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
53 # CGI:IRC module: Adds support for automatic host changing in CGI:IRC
54 # (http://cgiirc.sourceforge.net).
55 #<module name="m_cgiirc.so">
57 #-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
59 # Optional - If you specify to use m_cgiirc, then you must specify one
60 # or more cgihost tags which indicate authorised CGI:IRC servers which
61 # will be connecting to your network, and an optional cgiirc tag.
62 # For more information see: http://wiki.inspircd.org/Modules/cgiirc
64 # Set to yes if you want to notice opers when CGI clients connect
65 # <cgiirc opernotice="no">
67 # The type field indicates where the module should get the real
68 # client's IP address from, for further information, please see the
69 # CGI:IRC documentation.
72 # <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS
73 # <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
74 # <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
76 # <cgihost type="webirc" password="foobar"
77 # mask="somebox.mysite.com"> # Get IP from WEBIRC
82 # When you connect CGI:IRC clients, there are two connect classes which
83 # apply to these clients. When the client initially connects, the connect
84 # class which matches the cgi:irc site's host is checked. Therefore you
85 # must raise the maximum local/global clients for this ip as high as you
86 # want to allow cgi clients. After the client has connected and is
87 # determined to be a cgi:irc client, the class which matches the client's
88 # real IP is then checked. You may set this class to a lower value, so that
89 # the real IP of the client can still be restricted to, for example, 3
93 <module name="m_chanfilter.so">
94 <chanfilter hidemask="yes">
96 <module name="m_chanprotect.so">
103 deprotectothers="yes">
105 <module name="m_check.so">
106 <module name="m_chghost.so">
107 <hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
109 <module name="m_chgident.so">
110 <module name="m_chgname.so">
111 <module name="m_cloaking.so">
116 <module name="m_close.so">
117 <module name="m_clones.so">
118 <module name="m_commonchans.so">
120 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
121 # Conn-Join: Allows you to force users to join one or more channels
122 # automatically upon connecting to the server.
123 #<module name="m_conn_join.so">
125 #-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
127 # If you have m_conn_join.so loaded, you can configure it using the
130 #<autojoin channel="#one,#two,#three">
132 <module name="m_conn_umodes.so">
133 <module name="m_cycle.so">
135 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
136 # Connection throttle module. Configuration:
137 #<module name="m_connflood.so">
139 #-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
140 # seconds, maxconns - Amount of connections per <seconds>.
142 # timeout - Time to wait after the throttle was activated
143 # before deactivating it. Be aware that the time
144 # is seconds + timeout.
146 # quitmsg - The message that users get if they attempt to
147 # connect while the throttle is active.
149 # bootwait - Amount of time to wait before enforcing the
150 # throttling when the server just booted.
152 #<connflood seconds="30" maxconns="3" timeout="30"
153 # quitmsg="Throttled" bootwait="10">
155 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
156 # DCCALLOW module: Adds the /DCCALLOW command
157 <module name="m_dccallow.so">
159 #-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
160 # blockchat - Whether to block DCC CHAT as well as DCC SEND
161 # length - Default duration of entries in DCCALLOW list
162 # action - Default action to take if no action is specified
163 # can be 'block' or 'allow'
165 # File configuration:
166 # pattern - The glob pattern to match against
167 # action - Action to take if a user attempts to send a file
168 # that matches this pattern, can be 'block' or 'allow'
170 #<dccallow blockchat="yes" length="5m" action="block">
171 #<banfile pattern="*.exe" action="block">
172 #<banfile pattern="*.txt" action="allow">
174 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
176 <module name="m_deaf.so">
177 <module name="m_denychans.so">
178 #<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> #
179 #<badchan name="#heaven" redirect="#hell" reason="Nice try!"> #
181 <module name="m_devoice.so">
183 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
184 # Filter module: Provides message filtering, similar to SPAMFILTER.
185 <module name="m_filter.so">
187 # This module depends upon a regex provider such as m_regex_pcre or #
188 # m_regex_glob to function. You must specify which of these you want #
189 # m_filter to use via the tag below. #
191 # Valid engines are: #
193 # glob - Glob patterns, provided via m_regex_glob.so #
194 # pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre #
195 # tre - TRE regexps, provided via m_regex_tre.so, requires libtre #
196 # posix - POSIX regexps, provided via m_regex_posix.so, not availale #
197 # on windows, no dependencies on other operating systems. #
199 <filteropts engine="glob">
201 # Your choice of regex engine must match on all servers network-wide.
203 # You may specify specific channels that are exempt from being filtered:
204 #<exemptfromfilter channel="#blah">
206 #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
208 # Optional - If you specify to use the m_filter module, then #
209 # specfiy below the path to the filter.conf file, or define some #
212 #<include file="filter.conf">
214 <module name="m_gecosban.so">
215 <module name="m_globops.so">
216 <module name="m_globalload.so">
217 <module name="m_halfop.so">
218 <module name="m_helpop.so">
219 <include file="inspircd.helpop-full.example">
221 <module name="m_hidechans.so">
222 <hidechans affectsopers="false">
224 <module name="m_hideoper.so">
225 <module name="m_ident.so">
227 <module name="m_inviteexception.so">
228 <module name="m_joinflood.so">
229 <module name="m_jumpserver.so">
230 <module name="m_knock.so">
231 <module name="m_messageflood.so">
232 <module name="m_namesx.so">
233 <module name="m_nickflood.so">
234 <module name="m_noctcp.so">
235 <module name="m_nokicks.so">
236 <module name="m_nonicks.so">
237 <module name="m_nopartmsg.so">
238 <module name="m_nonotice.so">
239 <module name="m_operchans.so">
241 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
242 # Oper Join module: Auto-joins opers to a channel upon oper-up
243 # This module is oper-only. For the user equivalent, see m_conn_join.
244 <module name="m_operjoin.so">
246 #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
248 # If you are using the m_operjoin.so module, specify options here: #
250 # channel - The channel name to join, can also be a comma #
251 # seperated list eg. "#channel1,#channel2". #
253 # override - Lets the oper join walking thru any modes that #
254 # might be set, even bans. Use "yes" or "no". #
256 #<operjoin channel="#channel" override="no">
258 # Alternatively you can use the autojoin="channellist" in a <type> #
259 # tag to set specific autojoins for a type of oper, for example: #
261 #<type name="Helper" autojoin="#help" classes="...">
263 <module name="m_operlog.so">
265 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
266 # Oper MOTD module: Provides support for seperate message of the day
268 # This module is oper-only.
269 #<module name="m_opermotd.so">
271 #-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
273 # If you are using the m_opermotd.so module, specify the motd here #
275 # onoper - Should the message be sent on /OPER or only when #
276 # /OPERMOTD is used. Use "yes" or "no". #
278 #<opermotd file="oper.motd" onoper="yes">
280 <module name="m_override.so">
281 #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
283 # m_override.so is too complex it describe here, see the wiki: #
284 # http://wiki.inspircd.org/Modules/override #
286 <module name="m_operlevels.so">
287 <module name="m_opermodes.so">
288 <module name="m_password_hash.so">
289 <module name="m_muteban.so">
291 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
292 # Random Quote module: provides a random quote on connect.
293 # NOTE: Some of these may mimic fatal errors and confuse users and
294 # opers alike! - BEWARE!
295 #<module name="m_randquote.so">
297 #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
299 # Optional - If you specify to use the m_randquote.so module, then #
300 # specify below the path to the randquotes.conf file. #
302 #<randquote file="randquotes.conf">
304 <module name="m_redirect.so">
305 <module name="m_regex_glob.so">
307 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
308 # Regular Expression Provider for PCRE (Perl-Compatible Regular
309 # Expressions). You need libpcre installed to compile and load this
310 # module. You must have at least 1 provider loaded to use m_filter or
312 #<module name="m_regex_pcre.so">
314 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
315 # Regular Expression Provider for POSIX Regular Expressions.
316 # You shouldn't need any additional libraries on a POSIX-compatible
317 # system (ie: any Linux, BSD, but not Windows). You must have at least
318 # 1 provider loaded to use m_filter or m_rline.
319 # On POSIX-compliant systems, regex syntax can be found by using the
320 # command: 'man 7 regex'.
321 #<module name="m_regex_posix.so">
323 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
324 # Regular Expression Provider for TRE Regular Expressions.
325 # This is the same regular expression engine used by UnrealIRCd, so
326 # if you are most familiar with the syntax of /spamfilter from there,
327 # this is the provider you want. You need libtre installed in order
328 # to compile and load this module.
329 #<module name="m_regex_tre.so">
331 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
332 # Registered users only channel creation
333 # Allows only registered users and opers to create new channels.
335 # You probably *DO NOT* want to load this module on a public network.
337 #<module name="m_regonlycreate.so">
339 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
340 # Restricted channels module: Allows only opers to create channels.
342 # You probably *DO NOT* want to load this module on a public network.
344 #<module name="m_restrictchans.so">
346 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
347 # Restrict message module: Allows users to only message opers.
349 # You probably *DO NOT* want to load this module on a public network.
351 #<module name="m_restrictmsg.so">
353 <module name="m_sajoin.so">
354 <module name="m_sakick.so">
355 <module name="m_samode.so">
356 <module name="m_sanick.so">
357 <module name="m_sapart.so">
358 <module name="m_saquit.so">
359 <module name="m_satopic.so">
360 <module name="m_servprotect.so">
361 <module name="m_seenicks.so">
362 <module name="m_setidle.so">
363 <module name="m_services_account.so">
364 <module name="m_sethost.so">
365 <module name="m_setident.so">
366 <module name="m_setname.so">
367 <module name="m_showwhois.so">
368 <showwhois opersonly="yes" showfromopers="yes">
370 <module name="m_shun.so">
371 <shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="no" affectopers="no">
373 <module name="m_spy.so">
374 <module name="m_sslmodes.so">
376 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
377 # GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
378 # if enabled. You must copy the source for this module from the directory
379 # src/modules/extra, or answer 'yes' in ./configure when asked if you
380 # want to enable this, or it will not load.
381 #<module name="m_ssl_gnutls.so">
383 #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
385 # m_ssl_gnutls.so is too complex it describe here, see the wiki: #
386 # http://wiki.inspircd.org/Modules/ssl_gnutls #
388 # NOTE: If you want to use this module to encrypt and sign your #
389 # server to server traffic, you MUST load it before m_spanningtree in #
390 # your configuration file! #
392 <module name="m_sslinfo.so">
394 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
395 # OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
396 # if enabled. You must copy the source for this module from the directory
397 # src/modules/extra, or answer 'yes' in ./configure when asked if you
398 # want to enable this, or it will not load.
399 #<module name="m_ssl_openssl.so">
401 #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
403 # m_ssl_openssl.so is too complex it describe here, see the wiki: #
404 # http://wiki.inspircd.org/Modules/ssl_openssl #
406 # NOTE: If you want to use this module to encrypt and sign your #
407 # server to server traffic, you MUST load it before m_spanningtree in #
408 # your configuration file! #
410 <module name="m_stripcolor.so">
411 <module name="m_svshold.so">
412 <module name="m_swhois.so">
413 <module name="m_tline.so">
414 <module name="m_uhnames.so">
415 <module name="m_userip.so">
416 <module name="m_watch.so">
417 <watch maxentries="32">
419 <module name="m_spanningtree.so">