1 #-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
3 # These tags define which modules will be loaded on startup by your #
4 # server. Add modules without any paths. When you make your ircd #
5 # using the 'make' command, all compiled modules will be moved into #
6 # the folder you specified when you ran ./configure. The module tag #
7 # automatically looks for modules in this location. #
8 # If you attempt to load a module outside of this location, either #
9 # in the config, or via /LOADMODULE, you will receive an error. #
11 # By default, ALL modules are commented out. You must uncomment them #
12 # or add lines to your config to load modules. Please refer to #
13 # http://wiki.inspircd.org/Modules for a list of modules and #
14 # each modules link for any additional conf tags they require. #
16 # ____ _ _____ _ _ ____ _ _ _ #
17 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
18 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
19 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
20 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
22 # To link servers to InspIRCd, you MUST load the m_spanningtree #
23 # module. If you don't do this, server links will NOT work at all. #
24 # This is by design, to allow for the implementation of other linking #
25 # protocols in modules in the future. #
28 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
29 # MD5 Module - Allows other modules to generate MD5 hashes, usually for
30 # cryptographic uses and security.
33 # Other modules such as m_cloaking.so and m_password_hash.so may rely on
34 # this module being loaded to function.
36 #<module name="m_md5.so">
38 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
39 # SHA256 Module - Allows other modules to generate SHA256 hashes,
40 # usually for cryptographic uses and security.
43 # Other modules such as m_password_hash.so may rely on this module being
44 # loaded to function. Certain modules such as m_spanningtree.so will
45 # function without this module but when it is loaded their features will
46 # be enhanced (for example the addition of HMAC authentication).
48 #<module name="m_sha256.so">
49 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
50 # RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes,
51 # usually for cryptographic uses and security.
54 # Other modules may rely on this module being loaded to function.
55 #<module name="m_ripemd160.so">
57 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
58 # Abbreviation module: Provides the ability to abbreviate commands a-la
60 #<module name="m_abbreviation.so">
62 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
63 # Alias module: Allows you to define server-side command aliases
64 #<module name="m_alias.so">
68 #<fantasy prefix="!" allowbots="no">
71 # Set the prefix for in-channel aliases (fantasy commands) to the
72 # specified character. If not set, the default is "!".
74 # If this is set to no, +B clients will not be able to use fantasy
75 # commands. If not set, the default is no.
77 #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
79 # If you have the m_alias.so module loaded, you may also define #
80 # aliases as shown below. They are commonly used to provide shortcut #
81 # commands to services, however they are not limited to just this use.#
82 # An alias tag requires the following values to be defined in it: #
84 # text - The text to detect as the actual command line, #
85 # Cant contain spaces, but case insensitive. #
86 # You may have multiple aliases with the same #
87 # command name (text="" value), however the first #
88 # found will be executed if its format value is #
89 # matched, or it has no format value. Aliases are #
90 # read from the top of the file to the bottom. #
92 # usercommand - If this is true, the alias can be run simply as #
93 # /aliasname. Defaults to true. #
95 # channelcommand - If this is true, the alias can be used as an #
96 # in-channel alias or 'fantasy command', prefixed #
97 # by the fantasy prefix character, !aliasname by #
98 # default. Defaults to false. #
100 # format - If this is defined, the parameters of the alias #
101 # must match this glob pattern. For example if you #
102 # want the first parameter to start with a # for #
103 # the alias to be executed, set format="#*" in the #
104 # alias definition. Note that the :'s which are #
105 # part of IRC formatted lines will be preserved #
106 # for matching of this text. This value is #
109 # replace - The text to replace 'text' with. Usually this #
110 # will be "PRIVMSG ServiceName :$2-" or similar. #
111 # You may use the variables $1 through $9 in the #
112 # replace string, which refer to the first through #
113 # ninth word in the original string typed by the #
114 # user. You may also use $1- through $9- which #
115 # refer to the first word onwards, through to the #
116 # ninth word onwards, e.g. if the user types the #
117 # command "foo bar baz qux quz" then $3- will hold #
118 # "baz qux quz" and $2 will contain "bar". You may #
119 # also use the special variables: $nick, $ident, #
120 # $host and $vhost, and you may separate multiple #
121 # commands with a newline (which can be written in #
122 # the file literally, or encoded as &nl; or \n #
123 # depending on the config format setting). #
125 # requires - If you provide a value for 'requires' this means #
126 # the given nickname MUST be online for the alias #
127 # to successfully trigger. If they are not, then #
128 # the user receives a 'no such nick' 401 numeric. #
130 # uline - Defining this value with 'yes', 'true' or '1' #
131 # will ensure that the user given in 'requires' #
132 # must also be on a u-lined server, as well as #
133 # actually being on the network. If the user is #
134 # online, but not on a u-lined server, then an #
135 # oper-alert is sent out as this is possibly signs #
136 # of a user trying to impersonate a service. #
138 # operonly - Defining this value, with a value of 'yes', '1' #
139 # or true will make the alias oper only. If a non- #
140 # oper attempts to use the alias, it will appear #
143 #<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
144 #<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
145 #<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
146 #<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
147 #<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
148 #<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
149 #<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
150 #<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
151 #<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
152 #<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
153 #<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
154 #<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
156 # An example of using the format value to create an alias with two
157 # different behaviours depending on the format of the parameters.
159 #<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
160 # requires="ChanServ" uline="yes">
162 #<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
163 # requires="NickServ" uline="yes">
165 # This alias fixes a glitch in xchat 2.6.x and above and the way it
166 # assumes IDENTIFY must be prefixed by a colon (:) character. It should
167 # be placed ABOVE the default NICKSERV alias (the first example) listed
170 #<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
171 # requires="NickServ" uline="yes">
173 # You may also add aliases to trigger based on something said in a
174 # channel, aka 'fantasy' commands, configured in the same manner as any
175 # other alias, with usercommand="no" and channelcommand="yes" The
176 # command must be preceded by the fantasy prefix when used.
178 #<alias text="CS" usercommand="no" channelcommand="yes"
179 # replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
181 # This would be used as "!cs <command> <options>", with the channel
182 # being automatically inserted after the command in the message to
183 # ChanServ, assuming the fantasy prefix is "!".
185 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
186 # Allowinvite module: Gives channel mode +A to allow all users to use
187 # /invite, and extban A to deny invite from specific masks
188 #<module name="m_allowinvite.so">
190 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
191 # Alltime module: Shows time on all connected servers at once.
192 # This module is oper-only and provides /alltime.
193 # To use, ALLTIME must be in one of your oper class blocks.
194 #<module name="m_alltime.so">
196 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
197 # Auditorium module: Adds channel mode +u which makes everyone else
198 # except you in the channel invisible, used for large meetings etc.
199 #<module name="m_auditorium.so">
201 # Auditorium settings:
203 #<auditorium opvisible="no" opcansee="no" opercansee="yes">
205 # opvisible (auditorium-vis in exemptchanops):
206 # Show channel ops to all users
207 # opcansee (auditorium-see in exemptchanops):
208 # Allow ops to see all joins/parts/kicks in the channel
210 # Allow opers (channels/auspex) to see see all joins/parts/kicks in the channel
212 # Exemptchanops can be used to adjust the level at which users become visible or
213 # the level at which they can see the full membe list of the channel.
215 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
216 # Autoop module: Adds basic channel access controls via the +w listmode.
217 # For example, +w o:R:Brain will op anyone identified to the account "Brain"
219 #<module name="m_autoop.so">
221 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
222 # Ban except module: Adds support for channel ban exceptions (+e)
223 #<module name="m_banexception.so">
225 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
226 # Ban redirection module: Allows bans which redirect to a specified
227 # channel. e.g. +b nick!ident@host#channelbanneduserissentto
228 #<module name="m_banredirect.so">
230 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
231 # Block amsg module: Attempt to block all usage of /amsg and /ame
232 #<module name="m_blockamsg.so">
234 #-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
236 # If you have the m_blockamsg.so module loaded, you can configure it #
237 # with the <blockamsg> tag: #
239 # delay - How many seconds between two messages to force #
240 # them to be recognised as unrelated. #
241 # action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
242 # or 'killopers'. Define how to take action when #
243 # a user uses /amsg or /ame. #
245 #<blockamsg delay="3" action="killopers">
247 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
248 # Block CAPS module: Blocking all-CAPS messages with cmode +B
249 #<module name="m_blockcaps.so">
251 #-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
253 # percent - How many percent of text must be caps before text #
256 # minlen - The minimum length a line must be for the block #
257 # percent to have any effect. #
259 # capsmap - A list of chars to be considered CAPS, this was #
260 # you can add CAPS for your language. Also you can #
261 # add things like ! and space to further lock down #
263 #<blockcaps percent="50"
265 # capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
267 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
268 # Block color module: Blocking color-coded messages with cmode +c
269 #<module name="m_blockcolor.so">
271 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
272 # Botmode module: Adds the user mode +B
273 #<module name="m_botmode.so">
275 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
276 # CallerID module: Adds usermode +g which activates hybrid-style
277 # callerid (== block all private messages unless you /accept first)
278 #<module name="m_callerid.so">
280 #-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
281 # maxaccepts - Maximum number of entires a user can add to his #
282 # /accept list. Default is 16 entries. #
283 # operoverride - Can opers (note: ALL opers) ignore callerid mode? #
285 # tracknick - Preserve /accept entries when a user changes nick? #
286 # If no (the default), the user is removed from #
287 # everyone's accept list if he changes nickname. #
288 # cooldown - Amount of time (in seconds) that must pass since #
289 # the last notification sent to a user before he can #
290 # be sent another. Default is 60 (1 minute). #
291 #<callerid maxaccepts="16"
296 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
297 # CAP module: Provides the CAP negotiation mechanism seen in
298 # ratbox-derived ircds
299 #<module name="m_cap.so">
301 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
302 # CBAN module: Lets you disallow channels from being used at runtime.
303 # This module is oper-only and provides /cban.
304 # To use, CBAN must be in one of your oper class blocks.
305 #<module name="m_cban.so">
307 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
308 # Censor module: Adds channel and user mode +G
309 #<module name="m_censor.so">
311 #-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
313 # Optional - If you specify to use the m_censor module, then you must #
314 # specify some censor tags. See also: #
315 # http://wiki.inspircd.org/Modules/censor #
317 #<include file="conf/censor.conf">
319 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
320 # CGI:IRC module: Adds support for automatic host changing in CGI:IRC
321 # (http://cgiirc.sourceforge.net).
322 #<module name="m_cgiirc.so">
324 #-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
326 # Optional - If you specify to use m_cgiirc, then you must specify one
327 # or more cgihost tags which indicate authorised CGI:IRC servers which
328 # will be connecting to your network, and an optional cgiirc tag.
329 # For more information see: http://wiki.inspircd.org/Modules/cgiirc
331 # Set to yes if you want to notice opers when CGI clients connect
332 # <cgiirc opernotice="no">
334 # The type field indicates where the module should get the real
335 # client's IP address from, for further information, please see the
336 # CGI:IRC documentation.
339 # <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS
340 # <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
341 # <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
343 # <cgihost type="webirc" password="foobar"
344 # mask="somebox.mysite.com"> # Get IP from WEBIRC
349 # When you connect CGI:IRC clients, there are two connect classes which
350 # apply to these clients. When the client initially connects, the connect
351 # class which matches the cgi:irc site's host is checked. Therefore you
352 # must raise the maximum local/global clients for this ip as high as you
353 # want to allow cgi clients. After the client has connected and is
354 # determined to be a cgi:irc client, the class which matches the client's
355 # real IP is then checked. You may set this class to a lower value, so that
356 # the real IP of the client can still be restricted to, for example, 3
361 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
362 # Channel create module: Adds snomask +j, which will notify opers of
363 # any new channels that are created.
364 # This module is oper-only.
365 #<module name="m_chancreate.so">
367 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
368 # Channel filter module: Allows channel-op defined message
369 # filtering using simple string matches (channel mode +g)
370 #<module name="m_chanfilter.so">
372 # If hidemask is set to yes, the user will not be shown the mask when
373 # his/her message is blocked.
374 #<chanfilter hidemask="yes">
376 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
377 # Channel History module: Displays the last 'X' lines of chat to a user
378 # joining a channel with +H 'X:T' set; 'T' is the maximum time to keep
379 # lines in the history buffer. Designed so that the new user knows what
380 # the current topic of conversation is when joining the channel.
381 #<module name="m_chanhistory.so">
383 # Set the maximum number of lines allowed to be stored per channel below.
384 # This is the hard limit for 'X'.
385 # If notice is set to yes, joining users will get a NOTICE before playback
386 # telling them about the following lines being the pre-join history.
387 #<chanhistory maxlines="20" notice="yes">
389 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
390 # Channel logging module: used to send snotice output to channels, to
391 # allow staff to centrally monitor and discuss network activity.
393 # The "channel" field is where you want the messages to go, "snomasks"
394 # is what snomasks you want to be sent to that channel. Multiple tags
396 #<module name="m_chanlog.so">
397 #<chanlog snomasks="AOcC" channel="#opers">
399 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
400 # Channel Names module: Allows disabling channels which have certain
401 # characters in the channel name such as bold, colorcodes, etc which
402 # can be quite annoying and allow users to on occasion have a channel
403 # that looks like the name of another channel on the network.
404 #<module name="m_channames.so">
407 # denyrange: characters or range of characters to deny in channel
411 # allowrange: characters or range of characters to specifically allow
415 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
416 # Channelban: Implements extended ban j:, which stops anyone in already
417 # in a channel matching a mask like +b j:#channel*mask from joining.
418 #<module name="m_channelban.so">
420 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
421 # Chanprotect module: gives +q and +a channel modes
422 #<module name="m_chanprotect.so">
425 # noservices: With this set to yes, when a user joins a empty channel,
426 # the server will set +q on them. If set to no, it will only set +o
427 # on them until they register the channel.
430 # qprefix: Prefix (symbol) to use for +q users.
433 # aprefix: Prefix (symbol) to use for +a users.
436 # deprotectself: If this value is set (true, yes or 1), it will allow
437 # +a and +q users to remove the +a and +q from themselves, otherwise,
438 # the status will have to be removed by services.
441 # deprotectothers: If this value is set to yes, true, or 1, then any
442 # user with +q or +a may remove the +q or +a from other users.
443 deprotectothers="yes">
446 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
447 # Check module: gives /check
448 # Check is useful for looking up information on channels,
449 # users, IP addresses and hosts.
450 # This module is oper-only.
451 # To use, CHECK must be in one of your oper class blocks.
452 #<module name="m_check.so">
454 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
455 # CHGHOST module: Adds the /CHGHOST command
456 # This module is oper-only.
457 # To use, CHGHOST must be in one of your oper class blocks.
458 # NOTE: Services will not be able to set vhosts on users if this module
459 # isn't loaded. If you're planning on running services, you probably
461 #<module name="m_chghost.so">
463 #-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
464 # Optional - If you want to use special chars for hostnames you can #
465 # specify your own custom list of chars with the <hostname> tag: #
467 # charmap - A list of chars accepted as valid by the /CHGHOST #
468 # and /SETHOST commands. Also note that the list is #
470 #<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
472 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
473 # CHGIDENT module: Adds the /CHGIDENT command
474 # This module is oper-only.
475 # To use, CHGIDENT must be in one of your oper class blocks.
476 #<module name="m_chgident.so">
478 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
479 # CHGNAME module: Adds the /CHGNAME command
480 # This module is oper-only.
481 # To use, CHGNAME must be in one of your oper class blocks.
482 #<module name="m_chgname.so">
484 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
485 # Cloaking module: Adds usermode +x and cloaking support.
486 # Relies on the module m_md5.so being loaded before m_cloaking.so in
487 # the configuration file.
488 # To use, you should enable m_conn_umodes and add +x as
489 # an enabled mode. See the m_conn_umodes module for more information.
490 #<module name="m_cloaking.so">
492 #-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
494 # If you specify the m_cloaking.so module as above, you must define #
495 # cloak keys, and optionally a cloak prefix as shown below. The cloak #
496 # keys must be shared across the network for correct cloaking. #
498 # There are four methods of cloaking: #
500 # half Cloak only the "unique" portion of a host; show #
501 # the last 2 parts of the domain, /16 subnet of IPv4 #
502 # or /48 subnet of the IPv6 address. #
504 # full Cloak the users completely, using three slices for #
505 # common CIDR bans (IPv4: /16, /24; IPv6: /48, /64) #
507 # These methods use a single key that can be any length of text. #
508 # An optional prefix may be specified to mark cloaked hosts. #
510 # The following methods are maintained for backwards compatibility; #
511 # they are slightly less secure, and always hide unresolved IPs #
513 # compat-host InspIRCd 1.2-compatible host-based cloaking #
514 # compat-ip InspIRCd 1.2-compatible ip-always cloaking #
516 # You must specify key1, key2, key3, key4 for the compat cloaking #
517 # modes; the values must be less than 0x80000000 and should be picked #
518 # at random. Prefix is mandatory, will default to network name if not #
519 # specified, and will always have a "-" appended. #
520 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
526 #-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
527 # Close module: Allows an oper to close all unregistered connections.
528 # This module is oper-only and provides /close.
529 # To use, CLOSE must be in one of your oper class blocks.
530 #<module name="m_close.so">
532 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
533 # Clones module: Adds an oper command /CLONES for detecting cloned
534 # users. Warning: This module may be resource intensive when its
535 # command is issued, use with care.
536 # This module is oper-only.
537 # To use, CLONES must be in one of your oper class blocks.
538 #<module name="m_clones.so">
540 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
541 # Common channels module: Adds user mode +c, which, when set, requires
542 # that users must share a common channel with you to PRIVMSG or NOTICE
544 #<module name="m_commonchans.so">
546 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
547 # Conn-Join: Allows you to force users to join one or more channels
548 # automatically upon connecting to the server.
549 #<module name="m_conn_join.so">
551 #-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
553 # If you have m_conn_join.so loaded, you can configure it using the
556 #<autojoin channel="#one,#two,#three">
558 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
559 # Conn-Usermodes: Set modes on users when they connect
560 # When this module is loaded <connect:allow> tags may have an optional
561 # modes="" value, which contains modes to add or remove from users
562 # when they connect to the server.
563 #<module name="m_conn_umodes.so">
565 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
566 # Conn-Wait-for-Pong: Don't let a user connect until they PONG
567 #<module name="m_conn_waitpong.so">
569 #-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
571 # If you have the m_conn_waitpong.so module loaded, configure it with #
572 # the <waitpong> tag: #
574 # sendsnotice - Whether to send a snotice on connect, like other #
577 # killonbadreply - Whether to kill the user if they send the wrong #
580 #<waitpong sendsnotice="yes" killonbadreply="yes">
583 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
584 # Channel cycle module. Server side /hop, with +ilk etc bypass.
585 #<module name="m_cycle.so">
587 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
588 # Connectban: Provides IP connection throttling. Any IP range that connects
589 # too many times (configurable) in an hour is zlined for a (configurable)
590 # duration, and their count resets to 0.
592 # ipv4cidr and ipv6cidr allow you to turn the comparison from individual
593 # IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling
594 # over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
596 #<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
597 # This allows for 10 connections in an hour with a 10 minute ban if that is exceeded.
599 #<module name="m_connectban.so">
601 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
602 # Connection throttle module. Configuration:
603 #<module name="m_connflood.so">
605 #-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
606 # seconds, maxconns - Amount of connections per <seconds>.
608 # timeout - Time to wait after the throttle was activated
609 # before deactivating it. Be aware that the time
610 # is seconds + timeout.
612 # quitmsg - The message that users get if they attempt to
613 # connect while the throttle is active.
615 # bootwait - Amount of time in seconds to wait before enforcing
616 # the throttling when the server just booted.
618 #<connflood seconds="30" maxconns="3" timeout="30"
619 # quitmsg="Throttled" bootwait="10">
621 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
622 # Custom prefixes : allows for channel prefixes to be added.
623 # This can replace m_chanprotect and m_halfop, except for services that
624 # recognise those modules by name
625 #<module name="m_customprefix.so">
627 # name The name of the mode, must be unique from other modes
628 # letter The letter used for this mode. Required.
629 # prefix The prefix used for nicks with this mode. Not required.
630 # rank A numeric rank for this prefix, defining what permissions it gives
631 # VOICE_VALUE is 10000, HALFOP_VALUE is 20000, OP_VALUE is 30000
632 # ranktoset The numeric rank required to set/unset this mode. Defaults to rank.
633 # depriv Can you remove the mode from yourself? Defaults to yes.
634 #<customprefix name="founder" letter="q" prefix="~" rank="50000" ranktoset="50000">
635 #<customprefix name="admin" letter="a" prefix="&" rank="40000" ranktoset="50000">
636 #<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
637 #<customprefix name="halfvoice" letter="V" prefix="-" rank="1" ranktoset="20000">
639 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
640 # Custom title module: Adds the /TITLE command which allows for trusted
641 # users to gain a custom whois line and a optional
642 # vhost can be specified.
643 #<module name="m_customtitle.so">
645 #-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
646 # name - The username used to identify
647 # password - The password used to identify
648 # hash - The hash for the specific user's password (optional)
649 # m_password_hash.so and a hashing module must be loaded for this to work
650 # host - Allowed hostmask [optional]
651 # title - Title shown in whois
652 # vhost - Displayed host [optional]
654 #<title name="foo" password="bar" title="Official Chat Helper">
655 #<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
656 #<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
658 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
659 # DCCALLOW module: Adds the /DCCALLOW command
660 #<module name="m_dccallow.so">
662 #-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
663 # blockchat - Whether to block DCC CHAT as well as DCC SEND
664 # length - Default duration of entries in DCCALLOW list
665 # action - Default action to take if no action is specified
666 # can be 'block' or 'allow'
668 # File configuration:
669 # pattern - The glob pattern to match against
670 # action - Action to take if a user attempts to send a file
671 # that matches this pattern, can be 'block' or 'allow'
673 #<dccallow blockchat="yes" length="5m" action="block">
674 #<banfile pattern="*.exe" action="block">
675 #<banfile pattern="*.txt" action="allow">
677 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
679 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
680 # Deaf module: adds support for ircu style usermode +d - deaf to
681 # channel messages and channel notices.
682 #<module name="m_deaf.so">
684 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
685 # Delay join module: Adds the channel mode +D which delays all JOIN
686 # messages from users until they speak. If they quit or part before
687 # speaking, their quit or part message will not be shown to the channel
688 # which helps cut down noise on large channels in a more friendly way
689 # than the auditorium mode. Only channel ops may set the +D mode.
690 #<module name="m_delayjoin.so">
692 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
693 # Delay message module: Adds the channel mode +d which disallows a user
694 # from talking in the channel unless they've been joined for X seconds.
695 # Settable a la: /mode +d 30
696 #<module name="m_delaymsg.so">
698 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
699 # Deny Channels: Deny Channels from being used by users
700 #<module name="m_denychans.so">
702 #-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
704 # If you have the m_denychans.so module loaded, you need to specify #
705 # the channels to deny: #
707 # name - The channel name to deny. (glob masks are ok) #
709 # allowopers - If operators are allowed to override the deny. #
711 # reason - Reason given for the deny. #
713 # redirect - Redirect the user to a different channel #
715 #<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> #
716 #<badchan name="#heaven" redirect="#hell" reason="Nice try!"> #
718 # Redirects will not work if the target channel is set +L. #
720 # Additionally, you may specify channels which are allowed, even if #
721 # a badchan tag specifies it would be denied: #
722 #<goodchan name="#godsleeps"> #
723 # Glob masks are accepted here also.
725 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
726 # Devoice Module: Let users devoice themselves.
727 #<module name="m_devoice.so">
729 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
730 # DNS Blacklist Module: Provides support for looking up IPs on one or #
732 #<module name="m_dnsbl.so"> #
734 # For configuration options please see the wiki page for m_dnsbl at #
735 # http://wiki.inspircd.org/Modules/dnsbl #
737 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
738 # Exempt Channel Operators Module: Provides support for allowing #
739 # channel operators to be exempt from some channel modes. Supported #
740 # modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, #
741 # filter, regmoderated, nonick, nonotice, and stripcolor. #
742 #<module name="m_exemptchanops.so"> #
744 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
745 # Filter module: Provides message filtering, similar to SPAMFILTER.
746 #<module name="m_filter.so">
748 # This module depends upon a regex provider such as m_regex_pcre or #
749 # m_regex_glob to function. You must specify which of these you want #
750 # m_filter to use via the tag below. #
752 # Valid engines are: #
754 # glob - Glob patterns, provided via m_regex_glob.so #
755 # pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre #
756 # tre - TRE regexps, provided via m_regex_tre.so, requires libtre #
757 # posix - POSIX regexps, provided via m_regex_posix.so, not availale #
758 # on windows, no dependencies on other operating systems. #
760 #<filteropts engine="glob"> #
762 # Your choice of regex engine must match on all servers network-wide.
764 # You may specify specific channels that are exempt from being filtered:
765 #<exemptfromfilter channel="#blah">
767 #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
769 # Optional - If you specify to use the m_filter module, then #
770 # specfiy below the path to the filter.conf file, or define some #
773 #<include file="conf/filter.conf">
775 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
776 # Gecosban: Implements extended ban r:, which stops anyone matching
777 # a mask like +b r:*realname?here* from joining a channel.
778 #<module name="m_gecosban.so">
780 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
781 # GeoIP module: Allows the server admin to match users by country code.
782 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp
783 # and run make install, then uncomment this module to enable it.
784 # This module requires GeoIP to be installed on your system,
785 # use your package manager to find the appropriate packages
786 # or check the InspIRCd wiki page for this module.
787 #<module name="m_geoip.so">
789 # The actual allow/ban actions are done by connect classes, not by the
790 # GeoIP module. An example connect class to ban people from russia or
793 # <connect deny="*" geoip="TR,RU">
795 # The country code must be in capitals and should be an ISO country
796 # code such as TR, GB, or US. Unknown IPs (localhost, LAN IPs, etc)
797 # will be assigned the country code "UNK". Since connect classes are
798 # matched from top down, your deny classes must be above your allow
799 # classes for them to match.
801 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
802 # Globops module: gives /GLOBOPS and SNOMASK +g
803 # This module is oper-only.
804 # To use, GLOBOPS must be in one of your oper class blocks.
805 #<module name="m_globops.so">
807 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
808 # Global load module: Allows loading and unloading of modules network-
809 # wide (USE WITH EXTREME CAUTION!)
810 # This module is oper-only and provides /gloadmodule, /gunloadmodule
811 # and /greloadmodule.
812 # To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
813 # must be in one of your oper class blocks.
814 #<module name="m_globalload.so">
816 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
817 # Halfop module: Provides the +h (halfops) channel status mode.
818 #<module name="m_halfop.so">
820 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
821 # HELPOP module: Provides the /HELPOP command
822 #<module name="m_helpop.so">
824 #-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
826 # Optional - If you specify to use the m_helpop.so module, then #
827 # specify below the path to the helpop.conf file, or if you like to #
828 # make a mess, define your helpop tags in this conf. #
830 #<include file="conf/inspircd.helpop-full.example">
832 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
833 # HIDECHANS module: Allows opers to hide their channels list from non-
834 # opers by setting user mode +I on themselves.
835 #<module name="m_hidechans.so">
837 # HIDECHANS can optionally prevent opers from seeing channels on a +I
838 # user, for more privacy if set to true.
839 # This setting is not recommended for most mainstream networks.
840 #<hidechans affectsopers="false">
842 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
843 # HIDEOPER module: Allows opers to hide their oper status from non-
844 # opers by setting user mode +H on themselves.
845 # This module is oper-only.
846 #<module name="m_hideoper.so">
848 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
849 # Hostchange module: Allows a different style of cloaking
850 #<module name="m_hostchange.so">
852 #-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
854 # Optional - If you choose to use the m_hostchange.so module. #
855 # Config Help - See http://wiki.inspircd.org/Modules/hostchange #
857 #<host suffix="polarbears.org" separator="." prefix="">
858 #<hostchange mask="*@fbi.gov" action="addnick">
859 #<hostchange mask="*r00t@*" action="suffix">
860 #<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
861 #<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
863 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
864 # httpd module: Provides http server support for InspIRCd
865 #<module name="m_httpd.so">
867 #-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
869 # If you choose to use the m_httpd.so module, then you will need to add
870 # a <bind> tag with type "httpd", and load at least one of the other
871 # m_httpd_* modules to provide pages to display.
874 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
875 # http ACL module: Provides access control lists for m_httpd dependent
876 # modules. Use this module to restrict pages by IP address and by
879 #<module name="m_httpd_acl.so">
881 #-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
883 # Restrict access to the m_httpd_stats module to all but the local
884 # network and when the correct password is specified:
886 # <httpdacl path="/stats*" types="password,whitelist"
887 # username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*">
889 # Deny all connections to all but the main index page:
891 # <httpdacl path="/*" types="blacklist" blacklist="*">
894 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
895 # http config module: Allows the server's configuration to be viewed
896 # over HTTP. Requires m_httpd.so to be loaded for it to function.
897 #<module name="m_httpd_config.so">
899 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
900 # http stats module: Provides basic stats pages over HTTP
901 # Requires m_httpd.so to be loaded for it to function.
902 #<module name="m_httpd_stats.so">
904 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
905 # Ident: Provides RFC 1413 ident lookup support
906 # When this module is loaded <connect:allow> tags may have an optional
907 # useident="yes|no" boolean value, determining whether or not to lookup
908 # ident on users matching that connect tag.
909 #<module name="m_ident.so">
911 #-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
913 # Optional - If you are using the m_ident.so module, then you can #
914 # specify the timeout for ident lookups here. If not defined, it will #
915 # default to one second. This is a non-blocking timeout which holds #
916 # the user in a 'connecting' state until the lookup is complete. #
917 # The bind value indicates which IP to bind outbound requests to. #
921 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
922 # Invite except module: Adds support for channel invite exceptions (+I)
923 #<module name="m_inviteexception.so">
924 # Does a +I bypass channel +k in addition to +i?
925 #<inviteexception bypasskey="yes">
927 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
928 # Join flood module: Adds support for join flood protection (+j)
929 #<module name="m_joinflood.so">
931 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
932 # Jump Server module: Adds support for the RPL_REDIR numeric
933 # This module is oper-only.
934 # To use, JUMPSERVER must be in one of your oper class blocks.
935 # If your server is redirecting new clients and you get disconnected,
936 # do a REHASH from shell to open up again.
937 #<module name="m_jumpserver.so">
939 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
940 # Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
941 #<module name="m_kicknorejoin.so">
943 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
944 # Knock module: adds the /KNOCK command and +K channel mode
945 #<module name="m_knock.so">
946 # This setting specifes what to do when someone successfully /KNOCKs.
947 # If set to "notice", then a NOTICE will be sent to the channel.
948 # This is the default and the compatible setting, as it requires no
949 # special support from the clients.
950 # If set to "numeric" then a 710 numeric will be sent to the channel.
951 # This allows easier scripting but not all clients support it.
952 # If set to "both" then (surprise!) both will be sent.
953 #<knock notify="notice">
955 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
956 # LDAP authentication module: Adds the ability to authenticate users #
957 # via LDAP. This is an extra module which must be enabled explicitly #
958 # by symlinking it from modules/extra, and requires the OpenLDAP libs #
959 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_ldapauth.cpp
960 # and run make install, then uncomment this module to enable it. #
962 #<module name="m_ldapauth.so"> #
966 # <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" #
968 # server="ldap://brainwave.brainbox.cc" #
969 # allowpattern="Guest*" #
970 # killreason="Access denied" #
971 # searchscope="subtree" #
972 # binddn="cn=Manager,dc=brainbox,dc=cc" #
973 # bindauth="mysecretpass" #
976 # <ldapwhitelist cidr="10.42.0.0/16"> #
978 # The baserdn indicates the base DN to search in for users. Usually #
979 # this is 'ou=People,dc=yourdomain,dc=yourtld'. #
981 # The attribute value indicates the attribute which is used to locate #
982 # a user account by name. On POSIX systems this is usually 'uid'. #
984 # The server parameter indicates the LDAP server to connect to. The #
985 # ldap:// style scheme before the hostname proper is MANDITORY. #
987 # The allowpattern value allows you to specify a wildcard mask which #
988 # will always be allowed to connect regardless of if they have an #
989 # account, for example guest users. #
991 # Killreason indicates the QUIT reason to give to users if they fail #
994 # The searchscope value indicates the subtree to search under. On our #
995 # test system this is 'subtree'. Your mileage may vary. #
997 # Setting the verbose value causes an oper notice to be sent out for #
998 # every failed authentication to the server, with an error string. #
1000 # The binddn and bindauth indicate the DN to bind to for searching, #
1001 # and the password for the distinguished name. Some LDAP servers will #
1002 # allow anonymous searching in which case these two values do not #
1003 # need defining, otherwise they should be set similar to the examples #
1006 # ldapwhitelist indicates that clients connecting from an IP in the #
1007 # provided CIDR do not need to authenticate against LDAP. It can be #
1008 # repeated to whitelist multiple CIDRs. #
1010 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1011 # LDAP oper configuration module: Adds the ability to authenticate #
1012 # opers via LDAP. This is an extra module which must be enabled #
1013 # explicitly by symlinking it from modules/extra, and requires the #
1014 # OpenLDAP libs. Re-run configure with: ./configure --enable-extras=m_ldapoper.cpp
1015 # and run make install, then uncomment this module to enable it. #
1017 #<module name="m_ldapoper.so">
1021 # <ldapoper baserdn="ou=People,dc=brainbox,dc=cc"
1022 # server="ldap://brainwave.brainbox.cc"
1023 # searchscope="subtree"
1024 # binddn="cn=Manager,dc=brainbox,dc=cc"
1025 # bindauth="mysecretpass">
1027 # Available configuration items are identical to the same items in #
1028 # m_ldapauth above. #
1030 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1031 # Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
1032 # used to temporarily close/open for new connections to the server. #
1033 # These commands require OPER status and that the LOCKSERV UNLOCKSERV #
1034 # are specified in a <class> tag that the oper is part of. This is so #
1035 # you can control who has access to this possible dangerous command. #
1036 # If your server is locked and you get disconnected, do a REHASH from #
1037 # shell to open up again.
1039 # This module is oper-only.
1041 #<module name="m_lockserv.so">
1043 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1044 # Map hiding module: replaces /MAP and /LINKS output to users with a #
1045 # message to see a website, set by maphide="http://link.to/site" in #
1046 # the security tag, instead. #
1047 #<module name="m_maphide.so">
1049 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1050 # Msg flood module: Adds message/notice flood protection (+f)
1051 #<module name="m_messageflood.so">
1053 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1054 # MLOCK module: Adds support for server-side enforcement of services
1055 # side MLOCKs. Basically, this module suppresses any mode change that
1056 # would likely be immediately bounced by services.
1057 #<module name="m_mlock.so">
1059 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1060 # MsSQL module: Allows other SQL modules to access MS SQL Server
1061 # through a unified API. You must copy the source for this module
1062 # from the directory src/modules/extra, plus the file m_sqlv2.h
1063 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mssql.cpp
1064 # and run make install, then uncomment this module to enable it.
1066 #<module name="m_mssql.so">
1068 #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1070 # m_mssql.so is more complex than described here, see wiki for more #
1071 # info http://wiki.inspircd.org/Modules/mssql #
1073 #<database module="mssql" name="db" user="user" pass="pass" host="localhost" id="db1">
1075 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1076 # MySQL module: Allows other SQL modules to access MySQL databases
1077 # through a unified API. You must copy the source for this module
1078 # from the directory src/modules/extra, plus the file m_sqlv2.h
1079 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mysql.cpp
1080 # and run make install, then uncomment this module to enable it.
1082 #<module name="m_mysql.so">
1084 #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1086 # m_mysql.so is more complex than described here, see the wiki for #
1087 # more: http://wiki.inspircd.org/Modules/mysql #
1089 #<database module="mysql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database2">
1091 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1092 # Named Modes module: This module allows for the display and set/unset
1093 # of channel settings and modes via long-form mode names in channels with
1094 # channelmode +Z set. For example, to set a channelban with named modes:
1095 # /mode #channel +Z ban=foo!bar@baz . Currently this doesn't serve much
1096 # purpose outside of making channel administration a bit easier in some
1097 # cases, but eventually modules will start using named modes only because
1098 # we're running out of channelmodes. :D
1099 #<module name="m_namedmodes.so">
1101 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1102 # NAMESX module: Provides support for the NAMESX extension which allows
1103 # clients to see all the prefixes set on a user without getting confused.
1104 # This is supported by mIRC, x-chat, klient, and maybe more.
1105 #<module name="m_namesx.so">
1107 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1108 # National characters module:
1109 # 1) Allows using national characters in nicknames.
1110 # 2) Allows using custom (national) casemapping over the network.
1111 # file -- filename of existing file in "locales" directory
1112 # casemapping -- custom value for 005 numeric (if you want it to be
1113 # different from the filename.
1115 #<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink">
1116 #<module name="m_nationalchars.so">
1118 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1119 # Nickchange flood protection module: Allows up to X nick changes in Y seconds.
1120 # Provides channel mode +F.
1121 #<module name="m_nickflood.so">
1123 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1124 # Nicklock module: Let opers change a user's nick and then stop that
1125 # user from changing their nick again.
1126 # This module is oper-only.
1127 # To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
1128 #<module name="m_nicklock.so">
1130 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1131 # No ctcp module: Adds the channel mode +C to block CTCPs and extban C
1132 # to block CTCPs sent by specific users.
1133 #<module name="m_noctcp.so">
1135 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1136 # No kicks module: Adds the +Q channel mode and the Q: extban to deny
1137 # certain users from kicking.
1138 #<module name="m_nokicks.so">
1140 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1141 # No nicks module: Adds the +N channel mode, as well as the +b N:
1142 # extended bantype. +N stops all users from changing their nick,
1143 # the +b N: extban stops anyone from matching a +b N:nick!user@host
1144 # mask from changing their nick.
1145 #<module name="m_nonicks.so">
1147 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1148 # No part message module: adds extban 'p' to block part messages from #
1150 #<module name="m_nopartmsg.so">
1152 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1153 # No Notice module: adds the channel mode +T and the extban T to block
1154 # specific users from noticing the channel.
1155 #<module name="m_nonotice.so">
1157 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1158 # Network buisness join module
1159 # Allows an oper to join a channel using /OJOIN, giving them +Y on the
1160 # channel which makes them immune to kick/deop/etc.
1161 #<module name="m_ojoin.so">
1163 #<ojoin prefix="!" notice="yes" op="yes">
1164 # Specify the prefix that +Y will grant here
1165 # Leave prefix empty if you do not wish +Y to grant a prefix
1166 # If notice is set to on, upon ojoin, the server will notice
1167 # the channel saying that the oper is joining on network business
1168 # If op is set to on, it will give them +o along with +Y
1171 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1172 # Oper channels mode: Adds the +O channel mode and +beI type O:<mask>
1173 # to ban, exempt, and invex given oper type masks.
1174 # e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you
1175 # may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins.
1176 # +be work in a similar fashion.
1178 #<module name="m_operchans.so">
1180 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1181 # Oper Join module: Auto-joins opers to a channel upon oper-up
1182 # This module is oper-only. For the user equivalent, see m_conn_join.
1183 #<module name="m_operjoin.so">
1185 #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1187 # If you are using the m_operjoin.so module, specify options here: #
1189 # channel - The channel name to join, can also be a comma #
1190 # seperated list eg. "#channel1,#channel2". #
1192 # override - Lets the oper join walking thru any modes that #
1193 # might be set, even bans. Use "yes" or "no". #
1195 #<operjoin channel="#channel" override="no">
1197 # Alternatively you can use the autojoin="channellist" in a <type> #
1198 # tag to set specific autojoins for a type of oper, for example: #
1200 #<type name="Helper" autojoin="#help" classes="...">
1202 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1203 # Oper log module: Logs all oper commands to the ircd log at default
1205 # This module is oper-only.
1206 #<module name="m_operlog.so">
1208 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1209 # Oper prefixing module: Gives IRC operators a prefix status character
1210 # on all channels they are in.
1212 #<module name="m_operprefix.so">
1214 # You may additionally customise the prefix character.
1215 #<operprefix prefix="!">
1217 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1218 # Oper MOTD module: Provides support for seperate message of the day
1220 # This module is oper-only.
1221 #<module name="m_opermotd.so">
1223 #-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1225 # If you are using the m_opermotd.so module, specify the motd here #
1227 # onoper - Should the message be sent on /OPER or only when #
1228 # /OPERMOTD is used. Use "yes" or "no". #
1230 #<opermotd file="oper.motd" onoper="yes">
1232 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1233 # Override module: Adds support for oper override
1234 # This module is oper-only.
1235 #<module name="m_override.so">
1237 #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1239 # m_override.so is too complex it describe here, see the wiki: #
1240 # http://wiki.inspircd.org/Modules/override #
1242 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1243 # Oper levels module: Gives each oper a level and prevents
1244 # actions being taken against higher level opers
1245 # Specify the level as the 'level' parameter of the <type> tag
1246 # # This module is oper-only.
1247 #<module name="m_operlevels.so">
1249 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1250 # Oper modes module: Allows you to specify modes to add/remove on oper
1251 # Specify the modes as the 'modes' parameter of the <type> tag
1252 # and/or as the 'modes' parameter of the <oper> tag.
1253 # This module is oper-only. For the user equivalent, see m_conn_umodes
1254 #<module name="m_opermodes.so">
1256 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1257 # Password forwarding module: Forwards a password users can send on connect
1258 # to the specified client below. The client is usually nickserv and this
1259 # module is usually used to authenticate users with nickserv using their
1261 #<module name="m_passforward.so">
1264 # nick: nick to forward connect passwords to.
1267 # forwardmsg: Message to send to users using a connect password.
1268 # $nick will be the users' nick, $nickrequired will be the nick
1269 # of where the password is going (the nick above).
1270 # You can also use $user for the user ident string.
1271 forwardmsg="NOTICE $nick :*** Forwarding PASS to $nickrequired"
1273 # cmd: Command for the nick to run when it recieves a connect
1275 cmd="PRIVMSG $nickrequired :IDENTIFY $pass">
1277 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1278 # Password hash module: Allows hashed passwords to be used.
1279 # To be useful, a hashing module like m_sha256.so also needs to be loaded.
1281 #<module name="m_password_hash.so">
1283 #-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
1285 # To use this module, you must define a hash type for each oper's
1286 # password you want to hash. For example:
1288 # <oper name="Brain"
1289 # host="ident@dialup15.isp.com"
1291 # password="01ba4719c80b6fe911b091a7c05124b64eeece964e09c058ef8f9805daca546b"
1294 # Starting from 2.0, you can use a more secure salted hash that prevents simply
1295 # looking up the hash's value in a rainbow table built for the hash.
1296 # hash="hmac-sha256" password="lkS1Nbtp$CyLd/WPQXizsbxFUTqFRoMvaC+zhOULEeZaQkUJj+Gg"
1298 # Generate hashes using the /MKPASSWD command on the server. Don't run it on a
1299 # server you don't trust with your password.
1301 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1302 # Permanent Channels module: Channels with the permanent channels mode
1303 # will remain open even after everyone else has left the channel, and
1304 # therefore keep things like modes, ban lists and topic. Permanent
1305 # channels -may- need support from your Services package to function
1306 # properly with them. This adds channel mode +P.
1307 # This module is oper-only.
1308 #<module name="m_permchannels.so">
1310 # If you like, m_permchannels can write a config file of permanent channels
1311 # whenever +P is set, unset, or the topic/modes on a +P channel is changed.
1312 # If you want to do this, set the filename below, and uncomment the include.
1314 #<permchanneldb filename="data/permchannels.conf">
1315 #<include file="data/permchannels.conf">
1317 # You may also create channels on startup by using the <permchannels> block.
1318 # Don't forget to set them +P in the modes, or they won't stay permanent.
1319 #<permchannels channel="#opers" modes="isP" topic="Opers only.">
1321 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1322 # PostgreSQL module: Allows other SQL modules to access PgSQL databases
1323 # through a unified API. You must copy the source for this module
1324 # from the directory src/modules/extra, plus the file m_sqlv2.h
1325 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_pgsql.cpp
1326 # and run make install, then uncomment this module to enable it.
1328 #<module name="m_pgsql.so">
1330 #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1332 # m_pgsql.so is more complex than described here, see the wiki for #
1333 # more: http://wiki.inspircd.org/Modules/pgsql #
1335 #<database module="pgsql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database" ssl="no">
1337 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1338 # Muteban: Implements extended ban m:, which stops anyone matching
1339 # a mask like +b m:nick!user@host from speaking on channel.
1340 #<module name="m_muteban.so">
1343 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1344 # Random Quote module: provides a random quote on connect.
1345 # NOTE: Some of these may mimic fatal errors and confuse users and
1346 # opers alike! - BEWARE!
1347 #<module name="m_randquote.so">
1349 #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1351 # Optional - If you specify to use the m_randquote.so module, then #
1352 # specify below the path to the randquotes.conf file. #
1354 #<randquote file="randquotes.conf">
1356 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1357 # Redirect module: Adds channel redirection (mode +L) #
1358 # Optional: <redirect:antiredirect> to add usermode +L to stop forced #
1359 # redirection and instead print an error. #
1361 # Note: You can not update this with a simple rehash, it requires #
1362 # reloading the module for it to take effect. #
1363 # This also breaks linking to servers that do not have the option. #
1364 # This defaults to false for the 2.0 version, it will be enabled in #
1365 # all the future versions. #
1366 #<module name="m_redirect.so">
1367 #<redirect antiredirect="true">
1369 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1370 # Regular Expression Provider for Glob or wildcard (?/*) matching.
1371 # You must have at least 1 provider loaded to use m_filter or m_rline
1372 # modules. This module has no additional requirements, as it uses the
1373 # matching already present in InspIRCd core.
1374 #<module name="m_regex_glob.so">
1376 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1377 # Regular Expression Provider for PCRE (Perl-Compatible Regular
1378 # Expressions). You need libpcre installed to compile and load this
1379 # module. You must have at least 1 provider loaded to use m_filter or
1381 #<module name="m_regex_pcre.so">
1383 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1384 # Regular Expression Provider for POSIX Regular Expressions.
1385 # You shouldn't need any additional libraries on a POSIX-compatible
1386 # system (ie: any Linux, BSD, but not Windows). You must have at least
1387 # 1 provider loaded to use m_filter or m_rline.
1388 # On POSIX-compliant systems, regex syntax can be found by using the
1389 # command: 'man 7 regex'.
1390 #<module name="m_regex_posix.so">
1392 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1393 # Regular Expression Provider for C++11 std::regex Regular Expressions.
1394 # This module works on any fully compliant implementation of the C++11
1395 # std::regex container. Examples for such are Visual C++ 2010 and newer
1396 # but not libstdc++ (which GCC uses)
1397 # You should verify that std::regex is supported by your setup before
1398 # using this module, as it may compile normally but won't do anything
1399 # on some implementations.
1400 #<module name="m_regex_stdlib.so">
1402 # Specify the Regular Expression engine to use here. Valid settings are
1403 # bre, ere, awk, grep, egrep, ecmascript (default if not specified)
1404 #<stdregex type="ecmascript">
1406 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1407 # Regular Expression Provider for TRE Regular Expressions.
1408 # This is the same regular expression engine used by UnrealIRCd, so
1409 # if you are most familiar with the syntax of /spamfilter from there,
1410 # this is the provider you want. You need libtre installed in order
1411 # to compile and load this module.
1412 #<module name="m_regex_tre.so">
1414 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1415 # Registered users only channel creation
1416 # Allows only registered users and opers to create new channels.
1418 # You probably *DO NOT* want to load this module on a public network.
1420 #<module name="m_regonlycreate.so">
1422 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1423 # Remove module: Adds the /REMOVE command which is a peaceful
1424 # alternative to /KICK
1425 #<module name="m_remove.so">
1427 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1428 # Restricted channels module: Allows only opers to create channels.
1430 # You probably *DO NOT* want to load this module on a public network.
1432 #<module name="m_restrictchans.so">
1434 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1435 # Restrict message module: Allows users to only message opers.
1437 # You probably *DO NOT* want to load this module on a public network.
1439 #<module name="m_restrictmsg.so">
1441 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1442 # Ban users through regular expression patterns
1443 #<module name="m_rline.so">
1445 #-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1447 # If you wish to re-check a user when they change nickname (can be
1448 # useful under some situations, but *can* also use CPU with more users
1449 # on a server) then set the following configuration value:
1450 # Also, this is where you set what Regular Expression engine is to be
1451 # used. If you ever change it while running, all of your R-Lines will be
1452 # wiped. This is the regex engine used by all R-Lines set, and
1453 # m_regex_<engine>.so must be loaded, or rline will be nonfunctional
1454 # until you load it or change the engine to one that is loaded.
1456 #<rline matchonnickchange="yes" engine="pcre">
1458 # Generally, you will NOT want to use 'glob' here, as this turns
1459 # rline into just another gline. The exceptions are that rline will
1460 # always use the full nick!user@host realname string, rather than only
1461 # user@host, but beware that only the ? and * wildcards are available,
1462 # and are the only way to specify where the space can occur if you do
1463 # use glob. For this reason, is recommended to use a real regex engine
1464 # so that at least \s or [[:space:]] is available.
1466 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1467 # SAJOIN module: Adds the /SAJOIN command
1468 # This module is oper-only.
1469 # To use, SAJOIN must be in one of your oper class blocks.
1470 #<module name="m_sajoin.so">
1472 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1473 # SAKICK module: Adds the /SAKICK command
1474 # This module is oper-only.
1475 # To use, SAKICK must be in one of your oper class blocks.
1476 #<module name="m_sakick.so">
1478 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1479 # SAMODE module: Adds the oper /SAMODE command
1480 # This module is oper-only.
1481 # To use, SAMODE must be in one of your oper class blocks.
1482 #<module name="m_samode.so">
1484 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1485 # SANICK module: Allows opers to change user's nicks
1486 # This module is oper-only.
1487 # To use, SANICK must be in one of your oper class blocks.
1488 #<module name="m_sanick.so">
1490 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1491 # SAPART module: Adds the oper /SAPART command
1492 # This module is oper-only.
1493 # To use, SAPART must be in one of your oper class blocks.
1494 #<module name="m_sapart.so">
1496 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1497 # SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
1498 # This module is oper-only.
1499 # To use, SAQUIT must be in one of your oper class blocks.
1500 #<module name="m_saquit.so">
1502 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1503 # SATOPIC module: Adds the oper /SATOPIC command
1504 # This module is oper-only.
1505 # To use, SATOPIC must be in one of your oper class blocks.
1506 #<module name="m_satopic.so">
1508 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1509 # SASL authentication module: Provides support for IRC Authentication
1510 # Layer (aka: atheme SASL) via AUTHENTICATE.
1511 #<module name="m_sasl.so">
1513 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1514 # Secure list module: Prevent /LIST in the first minute of connection,
1515 # crippling most spambots and trojan spreader bots.
1516 #<module name="m_securelist.so">
1518 #-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1520 # Securelist can be harmful to some irc search engines such as #
1521 # netsplit.de and searchirc.com. To prevent securelist blocking these #
1522 # sites from listing, define exception tags as shown below: #
1523 <securehost exception="*@*.searchirc.org">
1524 <securehost exception="*@*.netsplit.de">
1525 <securehost exception="*@echo940.server4you.de">
1526 <securehost exception="*@*.ircdriven.com">
1528 # Define the following variable to change how long a user must wait #
1529 # before issuing a LIST. If not defined, defaults to 60 seconds. #
1531 #<securelist waittime="60"> #
1533 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1534 # Servprotect module: Provides support for Austhex style +k /
1535 # UnrealIRCD +S services mode
1536 #<module name="m_servprotect.so">
1538 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1539 # See nicks module: Allow for SNOMASK +N which shows nick changes.
1540 # This module is oper-only.
1541 #<module name="m_seenicks.so">
1543 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1544 # Set Idle module: Adds a command for opers to change their
1545 # idle time (mainly a toy)
1546 # This module is oper-only.
1547 # To use, SETIDLE must be in one of your oper class blocks.
1548 #<module name="m_setidle.so">
1550 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1551 # Services support module: Adds several usermodes such as +R and +M
1552 # this module implements the 'identified' state via account names (AC)
1553 # and is similar in operation to the way asuka and ircu handle services.
1555 # At the same time, this offers +r for users and channels to mark them
1556 # as identified seperately from the idea of a master account, which
1557 # can be useful for services which are heavily nick-as-account centric.
1559 # This replaces m_services from 1.1 and earlier.
1561 # Also of note is that this module implements three extbans:
1562 # +b R: (stop matching account names from joining)
1563 # +b M: (stop matching account names from speaking)
1564 # +b U:n!u@h (blocks matching unregistered users)
1566 #<module name="m_services_account.so">
1568 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1569 # Sethost module: Adds the /SETHOST command
1570 # This module is oper-only.
1571 # To use, SETHOST must be in one of your oper class blocks.
1572 # See m_chghost for how to customise valid chars for hostnames
1573 #<module name="m_sethost.so">
1575 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1576 # Setident module: Adds the /SETIDENT command
1577 # This module is oper-only.
1578 # To use, SETIDENT must be in one of your oper class blocks.
1579 #<module name="m_setident.so">
1581 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1582 # SETNAME module: Adds the /SETNAME command
1583 # This module is oper-only.
1584 # To use, SETNAME must be in one of your oper class blocks.
1585 #<module name="m_setname.so">
1587 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1588 # Serverban: Implements extended ban s:, which stops anyone connected
1589 # to a server matching a mask like +b s:server.mask.here from joining.
1590 #<module name="m_serverban.so">
1592 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1593 # Show Whois module: Adds the +W usermode which allows opers
1594 # to see when they are whois'ed (can be annoying).
1595 # This module is oper-only.
1596 #<module name="m_showwhois.so">
1598 # If you wish, you may also let users set this mode. Only opers with the
1599 # users/auspex priv will see real hosts of people, though. This setting
1600 # is not reloadable via /rehash, and will require /reloadmodule, as
1601 # it directly affects the mode object itself.
1602 #<showwhois opersonly="yes"
1604 # You may also set whether or not users should recieve whois notices, should
1605 # they be /whois'd by an oper.
1606 # showfromopers="yes">
1608 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1609 # Shun module: Provides the /SHUN command, which stops a user from
1610 # executing all except configured commands.
1611 # This module is oper-only.
1612 # To use, SHUN must be in one of your oper class blocks.
1613 #<module name="m_shun.so">
1615 # You may also configure which commands you wish a user to be able to
1616 # perform. It should be noted that if a shunned user issues QUIT or PART
1617 # then their message will be removed, as if they did not issue one.
1619 # You can (optionally) let the user know that their command was blocked.
1621 # You may also let SHUN affect opers (defaults to no).
1622 #<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
1624 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1625 # SSL channel mode module: Adds support for SSL-only channels (+z).
1626 # does not do anything useful without a working SSL module (see below)
1627 #<module name="m_sslmodes.so">
1629 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1630 # GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
1631 # if enabled. You must copy the source for this module from the directory
1632 # src/modules/extra, or answer 'yes' in ./configure when asked if you
1633 # want to enable this, or it will not load.
1634 #<module name="m_ssl_gnutls.so">
1636 #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1638 # m_ssl_gnutls.so is too complex it describe here, see the wiki: #
1639 # http://wiki.inspircd.org/Modules/ssl_gnutls #
1641 # NOTE: If you want to use this module to encrypt and sign your #
1642 # server to server traffic, you MUST load it before m_spanningtree in #
1643 # your configuration file! #
1645 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1646 # SSL Info module: Allows users to retrieve information about other
1647 # user's peer SSL certificates and keys. This can be used by client
1648 # scripts to validate users. For this to work, one of m_ssl_gnutls.so
1649 # or m_ssl_openssl.so must be loaded. This module also adds the
1650 # "* <user> is using a secure connection" whois line, the ability for
1651 # opers to use SSL fingerprints to verify their identity and the ability
1652 # to force opers to use SSL connections in order to oper up.
1653 # It is highly recommended to load this module especially if
1654 # you use SSL on your network.
1655 # For how to use the oper features, please see the first example <oper> tag
1656 # in opers.conf.example.
1658 #<module name="m_sslinfo.so">
1660 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1661 # OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
1662 # if enabled. You must copy the source for this module from the directory
1663 # src/modules/extra, or answer 'yes' in ./configure when asked if you
1664 # want to enable this, or it will not load.
1665 #<module name="m_ssl_openssl.so">
1667 #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1669 # m_ssl_openssl.so is too complex it describe here, see the wiki: #
1670 # http://wiki.inspircd.org/Modules/ssl_openssl #
1672 # NOTE: If you want to use this module to encrypt and sign your #
1673 # server to server traffic, you MUST load it before m_spanningtree in #
1674 # your configuration file! #
1676 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1677 # Strip color module: Adds the channel mode +S
1678 #<module name="m_stripcolor.so">
1680 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1681 # SILENCE module: Adds support for /SILENCE
1682 #<module name="m_silence.so">
1684 # Configuration tags:
1686 #<silence maxentries="32">
1688 # Sets the maximum number of entries on a users silence list.
1690 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1691 # SQLite3 module: Allows other SQL modules to access SQLite3 #
1692 # databases through a unified API. You must link the source for this #
1693 # module from the directory src/modules/extra to src/modules, plus #
1694 # the file m_sqlv2.h #
1695 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_aqlite.cpp
1696 # and run make install, then uncomment this module to enable it. #
1698 #<module name="m_sqlite3.so">
1700 #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1702 # m_sqlite.so is more complex than described here, see the wiki for #
1703 # more: http://wiki.inspircd.org/Modules/sqlite3 #
1705 #<database module="sqlite" hostname="/full/path/to/database.db" id="anytext">
1707 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1708 # SQL authentication module: Allows IRCd connections to be tied into
1709 # a database table (for example a forum). You must copy the source for
1710 # this module from the directory src/modules/extra
1711 # Depends on the SQLutils module being loaded first.
1712 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqlauth.cpp
1713 # and run make install, then uncomment this module to enable it.
1715 #<module name="m_sqlauth.so">
1717 #-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1719 # m_sqlauth.so is too complex it describe here, see the wiki: #
1720 # http://wiki.inspircd.org/Modules/sqlauth #
1722 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1723 # SQL oper module: Allows you to store oper credentials in an SQL table
1724 # You must copy the source for this module from the directory src/modules/extra
1725 # Depends on the SQLutils module being loaded first.
1726 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqloper.cpp
1727 # and run make install, then uncomment this module to enable it.
1729 #<module name="m_sqloper.so">
1731 #-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1733 # dbid - Database ID to use (see m_sql) #
1734 # hash - Hashing provider to use for password hashing #
1736 # See also: http://wiki.inspircd.org/Modules/sqloper #
1738 #<sqloper dbid="1" hash="md5">
1740 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1741 # SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
1742 # added/removed by Services. #
1743 #<module name="m_svshold.so">
1745 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1746 # SWHOIS module: Allows you to add arbitary lines to user WHOIS.
1747 # This module is oper-only.
1748 # To use, SWHOIS must be in one of your oper class blocks.
1749 #<module name="m_swhois.so">
1751 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1752 # Test module: enable this to create a command useful in testing
1753 # flood control. To avoid accidental use on live networks, the server
1754 # name must contain ".test" to load the module
1755 #<module name="m_testnet.so">
1757 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1758 # Timed bans module: Adds timed channel bans and the /TBAN command
1759 #<module name="m_timedbans.so">
1761 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1762 # Test line module: Adds the /TLINE command, used to test how many
1763 # users a /GLINE or /ZLINE etc would match.
1764 # This module is oper-only.
1765 # To use, TLINE must be in one of your oper class blocks.
1766 #<module name="m_tline.so">
1768 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1769 # Topiclock module: implements server-side topic locking to achieve deeper
1770 # integration with services packages.
1771 #<module name="m_topiclock.so">
1773 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1774 # UHNAMES support module: Adds support for the IRCX style UHNAMES
1775 # extension, which displays ident and hostname in the names list for
1776 # each user, saving clients from doing a WHO on the channel. Note that
1777 # this module is not widely supported yet. If a client does not support
1778 # UHNAMES it will not enable it, this will not break incompatible
1780 #<module name="m_uhnames.so">
1782 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1783 # Uninvite module: Adds the /UNINVITE command which lets users remove
1784 # pending invites from channels without waiting for the user to join.
1785 #<module name="m_uninvite.so">
1787 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1788 # Userip module: Adds the /USERIP command
1789 # This module is oper-only.
1790 # To use, USERIP must be in one of your oper class blocks.
1791 #<module name="m_userip.so">
1793 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1794 # Vhost module: Adds the VHOST command which allows for adding virtual
1795 # hosts which are accessible using a username and password in the config.
1796 #<module name="m_vhost.so">
1798 #-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1800 # user - Username for the vhost. #
1802 # pass - Password for the vhost. #
1804 # hash - The hash for the specific user (optional) #
1805 # m_password_hash.so and a hashing module must be loaded #
1806 # for this to work. #
1808 # host - Vhost to set. #
1810 #<vhost user="some_username" pass="some_password" host="some.host">
1811 #<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host">
1813 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1814 # Watch module: Adds the WATCH command, which is used by clients to
1815 # maintain notify lists.
1816 #<module name="m_watch.so">
1818 # Configuration tags:
1820 #<watch maxentries="32">
1822 # Sets the maximum number of entries on a user's watch list.
1824 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1825 # XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
1826 # in a file "xline.db" which can be re-loaded on restart. This is useful
1827 # for two reasons: it keeps bans so users may not evade them, and on
1828 # bigger networks, server connections will take less time as there will
1829 # be a lot less bans to apply - as most of them will already be there.
1830 #<module name="m_xline_db.so">
1832 # Specify the filename for the xline database here
1833 #<xlinedb filename="data/xline.db">
1835 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1836 # ____ _ _____ _ _ ____ _ _ _ #
1837 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
1838 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
1839 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
1840 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
1842 # To link servers to InspIRCd, you MUST load the m_spanningtree #
1843 # module. If you don't do this, server links will NOT work at all. #
1844 # This is by design, to allow for the implementation of other linking #
1845 # protocols in modules in the future. #
1848 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1849 # Spanning Tree module - allows linking of servers using the spanning
1850 # tree protocol (see the READ THIS BIT section above).
1851 # You will almost always want to load this.
1853 #<module name="m_spanningtree.so">
projects / user / henk / code / inspircd.git / blob