1 ########################################################################
3 # ___ ___ ____ ____ _ #
4 # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
5 # | || '_ \/ __| '_ \| || |_) | | / _` | #
6 # | || | | \__ \ |_) | || _ <| |__| (_| | #
7 # |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
10 # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
11 # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
12 # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
13 # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
16 ##################################||####################################
18 ##################################||####################################
20 # This is an example of the config file for InspIRCd. #
21 # Change the options to suit your network #
23 # Last updated on : 04/09/2006 #
24 # Written by : CC (cc@backchat.co.za) #
25 # Updated by : katsklaw (katsklaw@gmail.com) #
26 # Updated by : brain (brain@inspircd.org) #
28 # ____ _ _____ _ _ ____ _ _ _ #
29 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
30 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
31 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
32 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
34 # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
35 # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
36 # if you've configured InspIRCd before, these probably indicate #
37 # something new or different to this version and you SHOULD READ IT. #
39 ########################################################################
41 # Unalphabeticalise the modules list at your own risk #
43 ########################################################################
46 #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
48 # Here is where you enter the information about your server. #
50 # Syntax is as follows: #
52 # <server name="server.name" #
53 # description="Server Description" #
54 # network="MyNetwork"> #
57 <server name="penguin.omega.org.za"
58 description="Waddle World"
62 #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
64 # Describes the Server Administrator's real name, nick #
65 # and email address. #
67 # Syntax is as follows: #
68 # <admin name="real name" #
70 # email="email@address.com"> #
73 <admin name="Johnny English"
75 email="MI5@the.best.secret.agent">
78 #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
80 # Enter the port and address bindings here. #
82 # bind address - specifies which address ports bind to. Leaving this #
83 # field blank binds the port to all IPs available. #
85 # port - The port number to bind to. You may specify a port #
86 # range here, e.g. "6667-6669,7000,7001". If you do #
87 # this, the server will count each port within your #
88 # range as a seperate binding, making the above #
89 # example equivalent to five seperate bind tags. #
90 # A failure on one port in the range does not prevent #
91 # the entire range from being bound, just that one #
94 # type - can be 'clients' or 'servers'. The clients type is #
95 # a standard tcp based socket, the servers type is a #
96 # also a TCP based connection but of a different #
97 # format. SSL support is provided by modules, to #
98 # enable SSL support, please read the module section #
99 # of this configuration file. #
101 # ____ _ _____ _ _ ____ _ _ _ #
102 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
103 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
104 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
105 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
107 # If you want to link servers to InspIRCd you must load the #
108 # m_spanningtree module! Please see the modules list below for #
109 # information on how to load this module! If you do not load this #
110 # module, server ports will NOT be bound! #
112 # Leaving address empty binds to all available interfaces #
114 # Syntax is as follows: #
116 # <bind address="ip or host" port="port" type="clients"> #
117 # <bind address="ip or host" port="port" type="servers"> #
119 # If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, #
120 # then you must specify your IPV6 clients in the following form: #
121 # ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 address to bind the #
122 # port on. If InspIRCd is built for IPV4 connections (this is the #
123 # default) then you do not need to prefix your addresses like this. #
126 <bind address="" port="6660-6669" type="clients">
127 <bind address="" port="7000,7001" type="servers">
130 #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
132 # You can configure the passwords here which you wish to use for #
133 # the die and restart commands. Only trusted ircops who will #
134 # need this ability should know the die and restart password. #
136 # Syntax is as follows: #
137 # <power diepass="die password" restartpass="restart password" #
138 # pause="secs before dying"> #
141 <power diepass="diepass" restartpass="restartpass" pause="2">
144 #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
146 # This optional tag allows you to include another config file #
147 # allowing you to keep your configuration tidy. The configuration #
148 # file you include will be treated as part of the configuration file #
149 # which includes it, in simple terms the inclusion is transparent. #
151 # All paths to config files are relative to the directory of the main #
152 # config file inspircd.conf, unless the filename starts with a forward#
153 # slash (/) in which case it is treated as an absolute path. #
155 # Syntax is as follows: #
156 #<include file="file.conf"> #
159 #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
161 # This is where you can configure which connections are allowed #
162 # and denied access onto your server. #
163 # The password is optional. #
164 # You may have as many of these as you require. #
165 # To allow/deny all connections use a * #
167 # Syntax is as follows: #
169 # <connect allow="ip mask"> #
170 # <connect allow="ip mask" password="blahblah"> #
171 # <connect allow="ip mask" password="blah" timeout="10"> #
172 # <connect allow="ip mask" timeout="blah" flood="5"> #
173 # <connect allow="ip mask" threshold="8" pingfreq="120"> #
174 # <connect allow="ip mask" sendq="99999" revcq="696969"> #
175 # <connect allow="ip mask" localmax="3" globalmax="3"> #
176 # <connect deny="ip mask"> #
178 # IP masks may be specified in CIDR format or wildcard format, #
179 # for IPV4 and IPV6. #
181 # You may optionally include timeout="x" on any allow line, which #
182 # specifies the amount of time given before an unknown connection #
183 # is closed if USER/NICK/PASS are not given. This value is in secs #
185 # You should also include a flood="x" line which indicates #
186 # the number of lines a user may place into their buffer at once #
187 # before they are disconnected for excess flood. This feature can #
188 # not be disabled, however it can be set to exremely high values, #
189 # rendering it effectively disabled. A recommended value is 10. #
190 # A counter is maintained for each user which is reset every #
191 # 'threshold' seconds and specifying this threshold value with #
192 # threshold="X" indicates how often the counter is reset. For #
193 # example, with flood="5" and threshold="8", the user may not send #
194 # more than 5 lines in 8 secs. #
196 # You may optionally specify the sendq size and ping frequency of #
197 # each connect:allow line using the pingfreq="X" and sendq="X" #
198 # settings as shown in the full example below. #
199 # The ping frequency is specified in seconds, and the sendq size #
200 # in bytes. It is recommended, although not enforced, that you #
201 # should never set your sendq size to less than 8k. Send Queues are #
202 # dynamically allocated and can grow as needed up to the maximum #
205 # The optional recvq value is the maximum size which users in this #
206 # group may grow their receive queue to. This is recommended to be #
207 # kept pretty low compared to the sendq, as users will always #
208 # recieve more than they send in normal circumstances. The default #
209 # if not specified is 4096. #
211 # IMPORTANT NOTE, CALL THE CONFUSION POLICE! #
212 # The sendq is the data waiting to be sent TO THE USER. #
213 # The recvq is the data being received FROM THE USER. #
214 # The names sendq and recvq are from the SERVER'S PERSPECTIVE not #
215 # that of the user... Just to clear up any confusion or complaints #
216 # that these are backwards :p #
218 # The localmax and globalmax values can be used to enforce local #
219 # and global session limits on connections. The session limits are #
220 # counted against all users, but applied only to users within the #
221 # class. For example, if you had a class 'A' which has a session #
222 # limit of 3, and a class 'B' which has a session limit of 5, and #
223 # somehow, two users managed to get into class B which also match #
224 # class A, there is only one connection left for this IP now in A, #
225 # but if they can connect again to B, there are three. You get the #
229 <connect allow="196.12.*" password="secret">
230 <connect allow="*" timeout="60" flood="20" threshold="1" pingfreq="120" sendq="262144" recvq="8192" localmax="3" globalmax="3">
232 <connect deny="69.254.*">
233 <connect deny="3ffe::0/32">
236 #-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
238 # Classes are a group of commands which are grouped together #
239 # and given a unique name. They used to define which commands #
240 # are available to certain types of Operators. #
242 # Syntax is as follows: #
244 # <class name="name" commands="oper commands"> #
246 # ____ _ _____ _ _ ____ _ _ _ #
247 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
248 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
249 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
250 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
252 # You are not forced to give these classes the names given below. #
253 # You can create your own named classes, if you want, in fact that #
254 # is the whole idea of this system! #
256 # Note: It is possible to make a class which covers all available #
257 # commands. To do this, specify commands="*". This is not really #
258 # recommended, as it negates the whole purpose of the class system, #
259 # however it is provided for fast configuration (e.g. in test nets) #
262 <class name="Shutdown" commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOAD">
263 <class name="ServerLink" commands="CONNECT SQUIT RCONNECT MKPASSWD MKSHA256">
264 <class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE">
265 <class name="OperChat" commands="WALLOPS GLOBOPS SETIDLE SPYLIST SPYNAMES">
266 <class name="HostCloak" commands="SETHOST SETIDENT SETNAME CHGHOST CHGIDENT">
269 #-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-#
271 # This is where you specify which types of operators you have on #
272 # your server, as well as the commands they are allowed to use. #
273 # This works alongside with the classes specified above. #
275 # type name - a name for the combined class types #
276 # a type name cannot contain spaces, however if you #
277 # put an _ symbol in the name, it will be translated #
278 # to a space when displayed in a WHOIS. #
280 # classes - specified above, used for flexibility for the #
281 # server admin to decide on which operators get #
282 # what commands. Class names are case sensitive, #
283 # seperate multiple class names with spaces. #
285 # host - optional hostmask operators will recieve on oper-up. #
287 # Syntax is as follows: #
289 # <type name="name" classes="class names" host="oper hostmask"> #
291 # ____ _ _____ _ _ ____ _ _ _ #
292 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
293 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
294 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
295 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
297 # You are not forced to give these types the names given below. #
298 # You can create your own named types, if you want, in fact that #
299 # is the whole idea of this system! #
302 <type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za">
303 <type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za">
304 <type name="Helper" classes="HostCloak" host="helper.omega.org.za">
307 #-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
309 # Opers are defined here. This is a very important section. #
310 # Remember to only make operators out of truthworthy people. #
312 # name - oper name, This is case sensitive, so it is best to #
315 # password - password to oper-up, also case sensitive. #
316 # encryption is supported via modules. You may load #
317 # modules for MD5 or SHA256 encryption, and if you do, #
318 # this value will be a hash value, otherwise put a #
319 # plaintext password in this value. #
321 # host - hosts of client allowed to oper-up. #
322 # wildcards accepted, seperate multiple hosts with a #
323 # space. You may also specify CIDR ip addresses. #
325 # fingerprint - When using the m_ssl_oper_cert.so module, you may #
326 # specify a key fingerprint here. This can be obtained #
327 # using the /fingerprint command whilst the module is #
328 # loaded, or from the notice given to you when you #
329 # connect to the ircd using a client certificate, #
330 # and will lock this oper block to only the user who #
331 # has that specific key/certificate pair. #
332 # This enhances security a great deal, however it #
333 # requires that opers use clients which can send ssl #
334 # client certificates, if this is configured for that #
335 # oper. Note that if the m_ssl_oper.so module is not #
336 # loaded, and/or one of m_ssl_openssl or m_ssl_gnutls #
337 # is not loaded, this configuration option has no #
338 # effect and will be ignored. #
340 # type - Sefines the kind of operator. This must match a type #
341 # tag you defined above, and is case sensitive. #
343 # Syntax is as follows: #
344 # <oper name="login" #
346 # host="hostmask@of.oper" #
347 # fingerprint="hexsequence" #
348 # type="oper type"> #
351 <oper name="katsklaw"
353 host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16"
354 fingerprint="a41d730937a53b79f788c0ab13e9e1d5"
358 #-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-#
360 # Defines which servers can link to this one, and which servers this #
361 # server may create outbound links to. #
363 # name - The name is the canocial name of the server, does #
364 # not have to resolve - but it is expected to be set #
365 # in the remote servers connection info. #
367 # ipaddr - Valid host or ip address for remote server. These #
368 # hosts are resolved on rehash, and cached, if you #
369 # specify a hostname, so if you find that your server #
370 # is still trying to connect to an old IP after you #
371 # have updated your dns, try rehashing and then #
372 # attempting the connect again. #
374 # port - The TCP port for the remote server. #
376 # sendpass - Password to send to create an outbound connection #
379 # recvpass - Password to receive to accept an inbound connection #
380 # from this server. #
382 # autoconnect - Sets the server to autoconnect. Where x is the num. #
383 # (optional) of seconds between attempts. e.g. 300 = 5 minutes. #
385 # encryptionkey - Encryption key to be used for AES encryption, where #
386 # supported. Links using the spanning tree protocol #
387 # support AES. The encryption key must be EXACTLY 8, #
388 # 16 or 32 characters in length for a 64, 128 or 256 #
389 # bit key, respectively. #
391 # hidden - When using m_spanningtree.so for linking. you may #
392 # set this to 'yes', and if you do, the IP address/ #
393 # hostname of this connection will NEVER be shown to #
394 # any opers on the network. In /STATS c its address #
395 # will show as *@<hidden>, and during CONNECT and #
396 # inbound connections, its IP will show as <hidden> #
397 # UNLESS the connection fails (e.g. due to a bad #
398 # password or servername) #
400 # allowmask - When this is defined, it indicates a range of IP #
401 # addresses to allow for this link (You may use CIDR #
402 # or wildcard form for this address). #
403 # e.g. if your server is going to connect to you from #
404 # the range 1.2.3.1 through 1.2.3.255, put 1.2.3.0/24 #
405 # into this value. If it is not defined, then only #
406 # the ipaddr field of the server shall be allowed. #
408 # failover - If you define this option, it must be the name of a #
409 # different link tag in your configuration. This #
410 # option causes the ircd to attempt a connection to #
411 # the failover link in the event that the connection #
412 # to this server fails. For example, you could define #
413 # two hub uplinks to a leaf server, and set an #
414 # american server to autoconnect, with a european #
415 # hub as its failover. In this situation, your ircd #
416 # will only try the link to the european hub if the #
417 # american hub is unreachable. NOTE that for the #
418 # intents and purposes of this option, an unreachable #
419 # server is one which DOES NOT ANSWER THE CONNECTION. #
420 # If the server answers the connection with accept(), #
421 # EVEN IF THE CREDENTIALS ARE INVALID, the failover #
422 # link will not be tried! Failover settings will also #
423 # apply to autoconnected servers as well as manually #
426 # timeout - If this is defined, then outbound connections will #
427 # time out if they are not connected within this many #
428 # seconds. If this is not defined, the default of ten #
431 # to u:line a server (give it extra privilages required for running #
432 # services, Q, etc) you must include the <uline server> tag as shown #
433 # in the example below. You can have as many of these as you like. #
435 # WARNING: Unlike other ircds, u:lining a server allows ALL users on #
436 # that server to operoverride modes. This should only be used for #
437 # services and protected oper servers! #
439 # NOTE: If you have built InspIRCd with IPV6 support, and you want #
440 # to link to an IPV4 server, you must specify the IP address in the #
441 # form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
442 # server. If you have built InspIRCd for IPV4 (this is the default) #
443 # you should not prefix your IP addresses in this fashion. #
445 # ____ _ _____ _ _ ____ _ _ _ #
446 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
447 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
448 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
449 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
451 # If you want to link servers to InspIRCd you must load the #
452 # m_spanningtree module! Please see the modules list below for #
453 # information on how to load this module! If you do not load this #
454 # module, server links will NOT work! #
457 <link name="hub.penguin.org"
458 ipaddr="penguin.box.com"
460 allowmask="69.58.44.0/24"
462 failover="hub.other.net"
464 sendpass="outgoing!password"
465 recvpass="incoming!password">
467 <link name="services.antarctic.com"
470 allowmask="127.0.0.0/8"
472 recvpass="polarbears">
474 <uline server="services.antarctic.com">
477 #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
479 # These options let you define the path to your motd and rules #
480 # files. If these are relative paths, they are relative to the #
481 # configurtion directory. #
484 <files motd="inspircd.motd"
485 rules="inspircd.rules">
487 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
489 # Define your DNS server address here. InspIRCd has its own resolver. #
490 # If you do not define this value, the first dns server from your #
491 # /etc/resolv.conf file is read. If no entries are found in this file #
492 # or the file cannot be opened, the default value '127.0.0.1' is used #
493 # instead. The timeout value is in seconds. #
495 # ____ _ _____ _ _ ____ _ _ _ #
496 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
497 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
498 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
499 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
501 # When choosing a server, be sure to choose one which will do a #
502 # RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these #
503 # recursive lookups itself, to save time and resources. The dns #
504 # server recommended by the InspIRCd team is bind, available from the #
505 # ISC website. If your DNS server does not do a recursive lookup, you #
506 # will be able to notice this by the fact that none of your users are #
507 # resolving even though the DNS server appears to be up! Most ISP and #
508 # hosting provider DNS servers support recursive lookups. #
510 # NOTE: If you have built InspIRCd with IPV6 support, and you want #
511 # to use an IPV4 nameserver, you must specify the IP address in the #
512 # form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
513 # server. If you have built InspIRCd for IPV4 (this is the default) #
514 # you should not prefix your IP addresses in this fashion. #
516 # IF YOUR RESOLV.CONF CONTAINS ONLY IPV4 ADDRESSES, AND YOU ARE USING #
517 # IPV6, YOU MUST DEFINE THE <DNS SERVER> TAG, AND USE THE ::FFFF #
518 # PREFIX NOTATION. IF YOU DO NOT, HOSTS WILL *NOT* RESOLVE. #
521 <dns server="127.0.0.1" timeout="5">
523 # An example of using IPV4 nameservers over IPV6
524 #<dns server="::ffff:127.0.0.1" timeout="5">
526 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
528 # Define the path to the PID file here. The PID file can be used to #
529 # rehash the ircd from the shell or to terminate the ircd from the #
530 # shell using shell scripts, perl scripts etc, and to monitor the #
531 # ircd's state via cron jobs. If this is a relative path, it will be #
532 # relative to the configuration directory, and if it is not defined, #
533 # the default of 'inspircd.pid' is used. #
536 #<pid file="/path/to/inspircd.pid">
538 #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
540 # Use these tags to customise the ban limits on a per channel basis. #
541 # the tags are read from top to bottom, and any tag found which #
542 # matches the channels name applies the banlimit to that channel. #
543 # It is advisable to put an entry with the channel as '*' at the #
544 # bottom of the list. If none are specified or no maxbans tag is #
545 # matched, the banlist size defaults to 64 entries. #
548 <banlist chan="#morons" limit="128">
549 <banlist chan="*" limit="69">
551 #-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
553 # This tag is optional, and specifies one or more commands which are #
554 # not available to non-operators. For example you may wish to disable #
555 # NICK and prevent non-opers from changing their nicknames. #
556 # Note that any disabled commands take effect only after the user has #
557 # 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
558 # so for example disabling NICK will not cripple your network. #
561 #<disabled commands="TOPIC MODE">
564 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
566 # Just remove this... Its here to make you read ALL of the config #
569 <die value="You should probably edit your config *PROPERLY* and try again.">
573 #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
575 # Settings to define which features are useable on your server. #
577 # prefixquit - a prefix for a client's quit message #
579 # loglevel - specifies what detail of messages to log in the #
580 # log file. You may select from debug, verbose, #
581 # default, sparse and none. #
583 # allowhalfop - allows the +h channel mode #
585 # noservices - If noservices is true, yes, or 1, then the first #
586 # user into a channel gets founder status. This is #
587 # only useful on networks running the m_chanprotect #
588 # module without services. #
590 # qaprefixes - If qaprefixes is true, yes, or 1, then users #
591 # with +q or +a will get the ~ or & prefixes #
592 # used in unreal. This is only useful on networks #
593 # running the m_chanprotect module #
595 # deprotectself - If this value is set to yes, true, or 1, then any #
596 # user with +q or +a may remove the +q or +a from #
597 # themselves. The default setting is to not enable #
598 # this feature, which stops even the founder taking #
599 # away their founder status without using services. #
601 # cyclehosts - If this is set to true, yes or 1, then when a #
602 # user's hostname changes, they will appear to quit #
603 # and then rejoin with their new host. This prevents #
604 # clients from being confused by host changes, #
605 # especially in the case of bots, and it is #
606 # recommended that this option is enabled. #
608 # netbuffersize - size of the buffer used to receive data from #
609 # clients. The ircd may only read() this amount #
610 # of text in one go at any time. (OPTIONAL) #
612 # maxwho - The maximum number of results returned by a /WHO #
613 # query. This is to prevent /WHO being used as a #
614 # spam vector or means of flooding an ircd. The #
615 # default is 128, it is not recommended to raise it #
616 # above 1024. Values up to 65535 are permitted. #
618 # somaxconn - The maximum number of sockets that may be waiting #
619 # in the accept queue. This usually allows the ircd #
620 # to soak up more connections in a shorter space of #
621 # time when increased but please be aware there is a #
622 # system defined maximum value to this, the same way #
623 # there is a system defined maximum number of file #
624 # descriptors. Some systems may only allow this to #
625 # be up to 5 (ugh) while others such as FreeBSD will #
626 # default to a much nicer 128. #
628 # moduledir - This optional value indicates a runtime change of #
629 # the location where modules are to be found. This #
630 # does not add a supplementary directory. There can #
631 # only be one module path. #
633 # softlimit - This optional feature allows a defined softlimit. #
634 # if defined sets a soft maxconnections value, has #
635 # to be less than the ./configure maxclients #
637 # userstats - The userstats field is optional and specifies #
638 # which stats characters in /STATS may be requested #
639 # by non-operators. Stats characters in this field #
640 # are case sensitive and are allowed to users #
641 # independent of if they are in a module or the core #
643 # operspywhois - If this is set then when an IRC operator uses #
644 # /WHOIS on a user they will see all channels, even #
645 # ones if channels are secret (+s), private (+p) or #
646 # if the target user is invisible +i. #
648 # customversion - If you specify this configuration item, and it is #
649 # not set to an empty value, then when a user does #
650 # a /VERSION command on the ircd, this string will #
651 # be displayed as the second portion of the output, #
652 # replacing the system 'uname', compile flags and #
653 # socket engine/dns engine names. You may use this #
654 # to enhance security, or simply for vanity. #
656 # maxtargets - The maxtargets field is optional, and if not #
657 # defined, defaults to 20. It indicates the maximum #
658 # number of targets which may be given to commands #
659 # such as PRIVMSG, KICK etc. #
661 # hidesplits - When set to 'yes', will hide split server names #
662 # from non-opers. Non-opers will see '*.net *.split' #
663 # instead of the server names in the quit message, #
664 # identical to the way IRCu displays them. #
666 # hidebans - When set to 'yes', will hide gline, kline, zline #
667 # and qline quit messages from non-opers. For #
668 # example, user A who is not an oper will just see #
669 # (G-Lined) while user B who is an oper will see the #
670 # text (G-Lined: Reason here) instead. #
672 # hidewhois - When defined with a non-empty value, the given #
673 # text will be used in place of the user's server #
674 # in WHOIS, when a user is WHOISed by a non-oper. #
675 # For example, most nets will want to set this to #
676 # something like '*.netname.net' to conceal the #
677 # actual server the user is on. #
679 # flatlinks - When you are using m_spanningtree.so, and this #
680 # value is set to true, yes or 1, /MAP and /LINKS #
681 # will be flattened when shown to a non-oper. #
683 # hideulines - When you are using m_spanningtree.so, and this #
684 # value is set to true, yes or 1, then U-lined #
685 # servers will be hidden in /LINKS and /MAP. For non #
686 # opers. Please be aware that this will also hide #
687 # any leaf servers of a U-lined server, e.g. jupes. #
689 # tempdir - If defined, indicates a path where modules will be #
690 # temporarily copied before loading. If not defined, #
691 # defaults to /tmp. #
693 # nouserdns - If set to 'yes', 'true' or '1', no user dns #
694 # lookups will be performed for connecting users. #
695 # this can save a lot of resources on very busy irc #
698 # syntaxhints - If set to 'yes', 'true' or '1', when a user does #
699 # not give enough parameters for a command, a syntax #
700 # hint will be given (using the RPL_TEXT numeric) #
701 # as well as the standard ERR_NEEDMOREPARAMS. #
703 # announcets - If this value is defined to 'yes', 'true' or '1', #
704 # then if a channel's timestamp is updated the users #
705 # on the channel will be informed of the change via #
706 # a server notice to the channel with the old and #
707 # new TS values in the timestamp. If you think this #
708 # is just pointless noise, define the value to 0. #
710 # notimesync - If this value is 'yes', 'true', or '1', time #
711 # synchronization is disabled on this server. This #
712 # means any servers you are linked to will not #
713 # automatically synchronize time with you, and in #
714 # most cases will just result in more bounced modes #
715 # on netsplits. This option should be the same on #
719 <options prefixquit="Quit: "
721 netbuffersize="10240"
744 #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
746 # This tag lets you define the behaviour of the /whowas command of #
749 # groupsize - Controls the maximum entries per nick shown when #
750 # performing a /whowas nick. Setting this to 0 dis- #
751 # ables whowas completely. #
753 # maxgroups - The maximum number of nickgroups that can be added #
754 # to the list. If max is reached, oldest group will #
755 # be deleted first like a FIFO. A groupsize of 3 and #
756 # a maxgroups of 5000 will allow for 5000 nicks to #
757 # be stored with a history of 3, thus giving a total #
758 # of 3 * 5000 = 15000 entries. A setting of 0 dis- #
759 # ables whowas completely. #
761 # maxkeep - The maximum time a nick is kept in the whowas list #
762 # before being pruned. Time may be specified in #
763 # seconds, or in the following format: 1y2w3d4h5m6s #
764 # meaning one year, two weeks, three days, 4 hours, #
765 # 5 minutes and 6 seconds. All fields in this format #
766 # are optional. Minimum is 1 hour, if less InspIRCd #
767 # will default back to 1 hour. #
769 #<whowas groupsize="10" #
770 # maxgroups="100000" #
774 #-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
776 # These tags define which modules will be loaded on startup by your #
777 # server. Add modules without any paths. When you make your ircd #
778 # using the 'make' command, all compiled modules will be moved into #
779 # the folder you specified when you ran ./configure. The module tag #
780 # automatically looks for modules in this location. #
781 # If you attempt to load a module outside of this location, either #
782 # in the config, or via /LOADMODULE, you will receive an error. #
784 # By default, ALL modules are commented out. You must uncomment them #
785 # or add lines to your config to load modules. Please refer to #
786 # http://www.inspircd.org/wiki/Modules_List for a list of modules and#
787 # each modules link for any additional conf tags they require. #
789 # You may use wildcards in a <module> tag to load all modules which #
790 # match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
791 # m_sapart, m_saquit and m_sanick) #
793 # ____ _ _____ _ _ ____ _ _ _ #
794 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
795 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
796 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
797 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
799 # To link servers to InspIRCd, you MUST load the m_spanningtree #
800 # module, as shown below. If you DO NOT do this, server links will #
801 # NOT work at all. ie. The ports will NOT bind, and /connect will not #
802 # work properly. This is by design, to allow for the implementation #
803 # of other linking protocols in modules in the future. #
805 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
806 # Spanning Tree module - allows linking of servers using the spanning
807 # tree protocol (see the READ THIS BIT section above).
809 #<module name="m_spanningtree.so">
811 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
812 # Alias module: Allows you to define server-side command aliases
813 #<module name="m_alias.so">
815 #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
817 # If you have the m_alias.so module loaded, you may also define #
818 # aliases as shown below. They are commonly used to provide shortcut #
819 # commands to services, however they are not limited to just this use.#
820 # An alias tag requires the following values to be defined in it: #
822 # text - The text to detect at the start of the line, #
823 # must be at the start of the line to trigger the #
824 # alias. Cant contain spaces, but case insensitive #
825 # replace - The text to replace 'text' with. Usually this #
826 # will be "PRIVMSG ServiceName :$2-" or similar. #
827 # You may use the variables $1 through $9 in the #
828 # replace string, which refer to the first through #
829 # ninth word in the original string typed by the #
830 # user. You may also use $1- through $9- which #
831 # refer to the first word onwards, through to the #
832 # ninth word onwards, e.g. if the user types the #
833 # command "foo bar baz qux quz" then $3- will hold #
834 # "baz qux quz" and $2 will contain "bar". You may #
835 # also use the special variables: $nick, $ident, #
836 # $host and $vhost, and you may seperate multiple #
837 # commands with \n. If you wish to use the ACTUAL #
838 # characters \ and n together in a line, you must #
839 # use the sequence "\\n". #
840 # requires - If you provide a value for 'requires' this means #
841 # the given nickname MUST be online for the alias #
842 # to successfully trigger. If they are not, then #
843 # the user receives a 'no such nick' 401 numeric. #
844 # uline - Defining this value with 'yes', 'true' or '1' #
845 # will ensure that the user given in 'requires' #
846 # must also be on a u-lined server, as well as #
847 # actually being on the network. If the user is #
848 # online, but not on a u-lined server, then an #
849 # oper-alert is sent out as this is possibly signs #
850 # of a user trying to impersonate a service. #
851 # operonly - Defining this value, with a value of 'yes', '1' #
852 # or true will make the alias oper only. If a non- #
853 # oper attempts to use the alias, it will appear #
856 #<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
857 #<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
858 #<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
859 #<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
860 #<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
861 #<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
862 #<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $3" requires="NickServ" uline="yes">
864 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
865 # Alltime module: Shows time on all connected servers at once
866 # #<module name="m_alltime.so">
868 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
869 # Antibear security module: Prevents 'bear.txt' based trojans from
870 # connecting to your network by sending them a numeric they can't handle.
871 #<module name="m_antibear.so">
873 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
874 # Antibottler module: Labels bottler leech bots
875 #<module name="m_antibottler.so">
877 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
878 # Ban except module: Adds support for channel ban exceptions (+e)
879 #<module name="m_banexception.so">
881 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
882 # Block amsg module: Attempt to block all usage of /amsg and /ame
883 #<module name="m_blockamsg.so">
885 #-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
887 # If you have the m_blockamsg.so module loaded, you can configure it #
888 # with the <blockamsg> tag: #
890 # delay - How many seconds between two messages to force #
891 # them to be recognised as unrelated. #
892 # action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
893 # or 'killopers'. Define how to take action when #
894 # a user uses /amsg or /ame. #
896 #<blockamsg delay="3" action="killopers">
898 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
899 # Block CAPS module: Blocking all-CAPS messages with cmode +P
900 #<module name="m_blockcaps.so">
902 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
903 # Block colour module: Blocking colour-coded messages with cmode +c
904 #<module name="m_blockcolor.so">
906 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
907 # Botmode module: Adds the user mode +B
908 #<module name="m_botmode.so">
910 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
911 # CBAN module: Lets you disallow channels from being used at runtime.
912 #<module name="m_cban.so">
914 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
915 # Censor module: Adds the channel mode +G
916 #<module name="m_censor.so">
918 #-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
920 # Optional - If you specify to use the m_censor module, then you must #
921 # specify some censor tags. See also: #
922 # http://www.inspircd.org/wiki/Censor_Module #
924 #<include file="censor.conf">
926 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
927 # Channel filter module: Allows channel-op defined message
928 # filtering using simple string matches (channel mode +g)
929 #<module name="m_chanfilter.so">
931 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
932 # Chanprotect module: gives +q and +a channel modes
933 #<module name="m_chanprotect.so">
935 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
936 # CHGHOST module: Adds the /CHGHOST command
937 #<module name="m_chghost.so">
939 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
940 # CHGIDENT module: Adds the /CHGIDENT command
941 #<module name="m_chgident.so">
943 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
944 # Cloaking module: Adds usermode +x and cloaking support
945 #<module name="m_cloaking.so">
947 #-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
949 # Optional - If ypu specify the m_cloaking.so module as above, you #
950 # must define cloak keys, and optionally a cloak prefix as shown #
951 # below. When using cloaking, the cloak keys are MANDITORY and must #
952 # be included. However, if prefix is not included, it will default #
953 # to your networks name from the <server> tag. #
955 # <cloak key1="543241423" #
956 # key2="5378410432" #
957 # key3="1143242382" #
958 # key4="9504324581" #
961 # Please note that the key values will accept any number, and should #
962 # be large numbers. Using small numbers such as "7" or "1924" will #
963 # seriously weaken the security of your cloak. #
965 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
966 # Conn-Lusers: Shows the LUSERS output on connect
967 #<module name="m_conn_lusers.so">
969 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
970 # Conn-Usermodes: Set modes on users when they connect
971 # When this module is loaded <connect:allow> tags may have an optional
972 # modes="" value, which contains modes to add or remove from users
973 # when they connect to the server.
974 #<module name="m_conn_umodes.so">
976 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
977 # Conn-Wait-for-Pong: Don't let a user connect until they PONG
978 #<module name="m_conn_waitpong.so">
980 #-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
982 # If you have the m_conn_waitpong.so module loaded, configure it with #
983 # the <waitpong> tag: #
985 # sendsnotice - Whether to send a snotice on connect, like other #
988 # killonbadreply - Whether to kill the user if they send the wrong #
991 #<waitpong sendsnotice="yes" killonbadreply="yes">
993 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
994 # Connection throttle module. Configuration:
995 #<module name="m_connflood.so">
997 #-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
998 # seconds, maxconns - Amount of connections per <seconds>.
1000 # timeout - Time to wait after the throttle was activated
1001 # before deactivating it. Be aware that the time
1002 # is seconds + timeout.
1004 # quitmsg - The message that users get if they attempt to
1005 # connect while the throttle is active.
1007 # bootwait - Amount of time to wait before enforcing the
1008 # throttling when the server just booted.
1010 #<connflood seconds="30" maxconns="3" timeout="30"
1011 # quitmsg="Throttled" bootwait="10">
1013 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1014 # DCCALLOW module: Adds the /DCCALLOW command
1015 #<module name="m_dccallow.so">
1017 #-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1018 # blockchat - Whether to block DCC CHAT as well as DCC SEND
1019 # length - Default duration of entries in DCCALLOW list
1020 # action - Default action to take if no action is specified
1021 # can be 'block' or 'allow'
1023 # File configuration:
1024 # pattern - The glob pattern to match against
1025 # action - Action to take if a user attempts to send a file
1026 # that matches this pattern, can be 'block' or 'allow'
1028 #<dccallow blockchat="yes" length="5m" action="block">
1029 #<banfile pattern="*.exe" action="block">
1030 #<banfile pattern="*.txt" action="allow">
1032 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1034 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1035 # Deny Channels: Deny Channels from being used by users
1036 #<module name="m_denychans.so">
1038 #-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
1040 # If you have the m_denychans.so module loaded, you need to specify #
1041 # the channels to deny: #
1043 # name - The channel name to deny. #
1045 # allowopers - If operators are allowed to override the deny. #
1047 # reason - Reason given for the deny. #
1049 #<badchan name="#gods" allowopers="yes" reason="Tortoises!">
1051 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1052 # Devoice Module: Let users devoice themselves.
1053 #<module name="m_devoice.so">
1055 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1056 # Filter module: Provides glob-based message filtering
1057 #<module name="m_filter.so">
1059 # PCRE filter module: Filters messages using regular expressions
1060 #<module name="m_filter_pcre.so">
1062 # You may only use one or the other with these modules, network-wide.
1064 #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1066 # Optional - If you specify to use the m_filter or m_filter_pcre #
1067 # modules, then specfiy below the path to the filter.conf file, #
1068 # or define some <filter> tags. #
1070 #<include file="filter.conf">
1072 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1073 # Foobar module: does nothing - historical relic
1074 #<module name="m_foobar.so">
1076 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1077 # Globops module: gives /GLOBOPS and usermode +g
1078 #<module name="m_globops.so">
1080 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1081 # Global load module: Allows loading and unloading of modules network-
1082 # wide (USE WITH EXTREME CAUTION!)
1083 #<module name="m_globalload.so">
1085 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1086 # HELPOP module: Provides the /HELPOP command
1087 #<module name="m_helpop.so">
1089 #-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1091 # Optional - If you specify to use the m_helpop.so module, then #
1092 # specify below the path to the helpop.conf file, or if you like to #
1093 # make a mess, define your helpop tags in this conf. #
1095 #<include file="helpop.conf">
1097 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1098 # HIDECHANS module: Allows opers to hide their channels list from non-
1099 # opers by setting user mode +I on themselves.
1100 # <module name="m_hidechans.so">
1102 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1103 # HIDEOPER module: Allows opers to hide their oper status from non-
1104 # opers by setting user mode +H on themselves.
1105 # <module name="m_hideoper.so">
1107 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1108 # Hostchange module: Allows a different style of cloaking
1109 #<module name="m_hostchange.so">
1111 #-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
1113 # Optional - If you choose to use the m_hostchange.so module. #
1114 # Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
1116 #<host suffix="polarbears.org">
1117 #<hostchange mask="*@fbi.gov" action="addnick">
1118 #<hostchange mask="*r00t@*" action="suffix">
1119 #<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
1121 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1122 # httpd module: Provides http server support for InspIRCd
1123 #<module name="m_httpd.so">
1125 #-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1127 # Optional - If you choose to use the m_httpd.so module, then you must
1128 # specify the port number and other details of your http server:
1130 #<http ip="192.168.1.10" host="brainwave" port="32006"
1131 # index="/home/brain/inspircd/http/index.html">
1133 # You may have as many of these tags as you wish, each with a different
1134 # IP, port, host or index file. Each one will act as an independent
1138 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1139 # http stats module: Provides basic stats pages over HTTP
1140 # Requires m_httpd.so to be loaded for it to function.
1141 #<module name="m_httpd_stats.so">
1143 #-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
1145 #<httpstats stylesheet="http://remote.style/sheet.css">
1148 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1149 # Ident: Provides RFC 1413 ident lookup support
1150 #<module name="m_ident.so">
1152 #-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1154 # Optional - If you are using the m_ident.so module, then you can #
1155 # specify the timeout for ident lookups here. If not defined, it will #
1156 # default to one second. This is a non-blocking timeout which holds #
1157 # the user in a 'connecting' state until the lookup is complete. #
1159 #<ident timeout="5">
1161 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1162 # Invite except module: Adds support for channel invite exceptions (+I)
1163 #<module name="m_inviteexception.so">
1165 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1166 # Join flood module: Adds support for join flood protection (+j)
1167 #<module name="m_joinflood.so">
1169 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1170 # Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
1171 #<module name="m_kicknorejoin.so">
1173 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1174 # Knock module: adds the /KNOCK command and +K channel mode
1175 #<module name="m_knock.so">
1177 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1178 # Msg flood module: Adds message/notice flood protection (+f)
1179 #<module name="m_messageflood.so">
1181 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1182 # MySQL module: Allows other SQL modules to access MySQL databases
1183 # through a unified API. You must copy the source for this module
1184 # from the directory src/modules/extra, plus the file m_sqlv2.h
1185 #<module name="m_mysql.so">
1187 #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1189 # m_mysql.so is more complex than described here, see the wiki for #
1190 # more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
1192 #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
1194 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1195 # NAMESX module: Provides support for the NAMESX extension which allows
1196 # clients to see all the prefixes set on a user without getting confused.
1197 # This is supported by mIRC, x-chat, klient, and maybe more.
1198 #<module name="m_namesx.so">
1200 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1201 # Nicklock module: Let opers change a user's nick and then stop that
1202 # user from changing their nick again.
1203 #<module name="m_nicklock.so">
1205 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1206 # No ctcp module: Adds the channel mode +C to block CTCPs
1207 #<module name="m_noctcp.so">
1209 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1210 # Noinvite module: Gives channel mode +V
1211 #<module name="m_noinvite.so">
1213 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1214 # No kicks module: Adds the +Q channel mode
1215 #<module name="m_nokicks.so">
1217 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1218 # No nicks module: Adds the +N channel mode
1219 #<module name="m_nonicks.so">
1221 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1222 # No Notice module: adds the channel mode +T
1223 #<module name="m_nonotice.so">
1225 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1226 # Oper channels mode: Adds the +O channel mode
1227 #<module name="m_operchans.so">
1229 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1230 # Oper Join module: Forces opers to join a channel on oper-up
1231 #<module name="m_operjoin.so">
1233 #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1235 # If you are using the m_operjoin.so module, specify the channel here #
1237 #<operjoin channel="#channel">
1239 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1240 # Oper MOTD module: Provides support for seperate message of the day
1242 #<module name="m_opermotd.so">
1244 #-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1246 # If you are using the m_opermotd.so module, specify the motd here #
1248 #<opermotd file="/path/to/oper.motd">
1250 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1251 # Override module: Adds support for oper override
1252 #<module name="m_override.so">
1254 #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1256 # m_override.so is too complex it describe here, see the wiki: #
1257 # http://www.inspircd.org/wiki/Oper_Override_Module #
1259 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1260 # Oper levels module: Gives each oper a level and prevents
1261 # actions being taken against higher level opers
1262 # Specify the level as the 'level' parameter of the <type> tag
1263 #<module name="m_operlevels.so">
1265 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1266 # Oper MD5 module: Allows MD5 hashed oper passwords
1267 #<module name="m_opermd5.so">
1269 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1270 # Oper SHA256 module: Allows SHA256 hashed oper passwords
1271 # This module is in src/modules/extra
1272 #<module name="m_opersha256.so">
1274 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1275 # Oper modes module: Allows you to specify modes to add/remove on oper
1276 # Specify the modes as the 'modes' parameter of the <type> tag
1277 #<module name="m_opermodes.so">
1279 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1280 # PostgreSQL module: Allows other SQL modules to access PgSQL databases
1281 # through a unified API. You must copy the source for this module
1282 # from the directory src/modules/extra, plus the file m_sqlv2.h
1283 #<module name="m_pgsql.so">
1285 #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1287 # m_pgsql.so is more complex than described here, see the wiki for #
1288 # more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
1290 #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
1292 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1293 # Random Quote module: provides a random quote on connect.
1294 # NOTE: Some of these may mimic fatal errors and confuse users and
1295 # opers alike! - BEWARE!
1296 #<module name="m_randquote.so">
1298 #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1300 # Optional - If you specify to use the m_randquote.so module, then #
1301 # specify below the path to the randquotes.conf file. #
1303 #<randquote file="/path/to/inspircd/randquotes.conf">
1305 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1306 # Redirect module: Adds channel redirection (mode +L)
1307 #<module name="m_redirect.so">
1309 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1310 # Remove module: Adds the /REMOVE command which is a peaceful
1311 # alternative to /KICK
1312 #<module name="m_remove.so">
1314 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1315 # Restrict banned users module:
1316 # Disallows banned users on a channel from messaging the channel,
1317 # changing nick, or changing the topic, if loaded.
1318 #<module name="m_restrictbanned.so">
1320 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1321 # Restricted channels module: Allows only opers to create channels
1322 #<module name="m_restrictchans.so">
1324 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1325 # Restrict message module: Allows users to only message opers
1326 #<module name="m_restrictmsg.so">
1328 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1329 # Provide /LIST throttling (to prevent flooding) and /LIST safety to
1330 # prevent excess flood when the list is large.
1331 #<module name="m_safelist.so">
1333 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1334 # SAJOIN module: Adds the /SAJOIN command
1335 #<module name="m_sajoin.so">
1337 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1338 # SAMODE module: Adds the oper /SAMODE command
1339 #<module name="m_samode.so">
1341 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1342 # SANICK module: Allows opers to change user's nicks
1343 #<module name="m_sanick.so">
1345 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1346 # SAPART module: Adds the oper /SAPART command
1347 #<module name="m_sapart.so">
1349 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1350 # SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
1351 #<module name="m_saquit.so">
1353 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-
1354 # Secure list module: Prevent /LIST in the first minute of connection,
1355 # crippling most spambots and trojan spreader bots.
1356 #<module name="m_securelist.so">
1358 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1359 # Set Idle module: Adds a command for opers to change their
1360 # idle time (mainly a toy)
1361 #<module name="m_setidle.so">
1363 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1364 # Services support module: Adds several usermodes such as +R and +M
1365 # this module implements the 'identified' state via user mode +r, which
1366 # is similar to the DALnet and dreamforge systems.
1367 #<module name="m_services.so">
1369 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1370 # Services support module: Adds several usermodes such as +R and +M
1371 # this module implements the 'identified' state via account names (AC)
1372 # and is similar in operation to the way asuka and ircu handle services.
1373 # it cannot be used at the same time as m_services, above.
1374 #<module name="m_services_account.so">
1376 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1377 # Sethost module: Adds the /SETHOST command
1378 #<module name="m_sethost.so">
1380 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1381 # Setident module: Adds the /SETIDENT command
1382 #<module name="m_setident.so">
1384 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1385 # SETNAME module: Adds the /SETNAME command
1386 #<module name="m_setname.so">
1388 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1389 # Show Whois module: Adds the +W usermode which allows opers
1390 # to see when they are whois'ed (can be annoying).
1391 #<module name="m_showwhois.so">
1393 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1394 # Spy module: Adds the commands SPYLIST and SPYNAMES that let opers
1395 # see who is in a +s channel, and list +s channels, show keys of keyed
1396 # channels the oper is not a member of etc. (standard 'abusive' features
1397 # of many other ircds, modulized here in InspIRCd).
1398 #<module name="m_spy.so">
1400 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1401 # SSL channel mode module: Adds support for SSL-only channels (+z).
1402 # does not do anything useful without a working SSL module (see below)
1403 #<module name="m_sslmodes.so">
1405 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1406 # Dummy ssl module: If you have other servers on your network which
1407 # have SSL, but your server does not have ssl enabled, you should load
1408 # this module, which will handle SSL metadata (e.g. the "Is using ssl"
1409 # field in the WHOIS information).
1410 #<module name="m_ssl_dummy.so">
1412 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1413 # GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
1414 # if enabled. You must copy the source for this module from the directory
1415 # src/modules/extra, or answer 'yes' in ./configure when asked if you
1416 # want to enable this, or it will not load.
1417 #<module name="m_ssl_gnutls.so">
1419 #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1421 # m_ssl_gnutls.so is too complex it describe here, see the wiki: #
1422 # http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
1424 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1425 # SSL Info module: Allows users to retrieve information about other
1426 # user's peer SSL certificates and keys. This can be used by client
1427 # scripts to validate users. For this to work, one of m_ssl_gnutls.so
1428 # or m_ssl_openssl.so must be loaded. You must symlink the source for
1429 # this module from the directory src/modules/extra.
1430 #<module name="m_sslinfo.so">
1432 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1433 # OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
1434 # if enabled. You must copy the source for this module from the directory
1435 # src/modules/extra, or answer 'yes' in ./configure when asked if you
1436 # want to enable this, or it will not load.
1437 #<module name="m_ssl_openssl.so">
1439 #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1441 # m_ssl_openssl.so is too complex it describe here, see the wiki: #
1442 # http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
1444 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1445 # SSL Cert Oper module: Allows opers to oper up using the key fingerprint
1446 # stored within their SSL certificate and key pair.
1447 # When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
1448 # be loaded. An extra value should be added to enabled opers, which
1449 # is in the following format: fingerprint="<hash>". For more information,
1450 # see the example in the oper blocks.
1451 #<module name="m_ssl_oper_cert.so">
1453 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1454 # Strip colour module: Adds the channel mode +S
1455 #<module name="m_stripcolor.so">
1457 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1458 # SILENCE module: Adds support for /SILENCE
1459 #<module name="m_silence.so">
1461 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1462 # SQLutils module: Provides some utilities to SQL client modules, such
1463 # as mapping queries to users and channels. You must copy the source
1464 # for this module from the directory src/modules/extra/m_sqlutils.cpp
1465 # and src/modules/extra/m_sqlutils.h into /src/modules
1466 # Needed for, and loaded before: SQLauth and SQLoper
1467 #<module name="m_sqlutils.so">
1469 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1470 # SQL authentication module: Allows IRCd connections to be tied into
1471 # a database table (for example a forum). You must copy the source for
1472 # this module from the directory src/modules/extra
1473 # Depends on the SQLutils module being loaded first.
1474 #<module name="m_sqlauth.so">
1476 #-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1478 # m_sqlauth.so is too complex it describe here, see the wiki: #
1479 # http://www.inspircd.org/wiki/SQL_Authentication_Module #
1481 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1482 # SQL logging module: Allows you to log network-wide data for your
1483 # network in a fully normalized set of SQL tables. You must copy the
1484 # source for this module from the directory src/modules/extra
1485 #<module name="m_sqllog.so">
1487 #-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1489 # dbid - Database ID to use (see m_sql) #
1491 # See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
1495 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1496 # SQL oper module: Allows you to store oper credentials in an SQL table
1497 # You must copy the source for this module from the directory src/modules/extra
1498 # Depends on the SQLutils module being loaded first.
1499 #<module name="m_sqloper.so">
1501 #-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1503 # dbid - Database ID to use (see m_sql) #
1505 # See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
1509 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1510 # SWHOIS module: Allows you to add arbitary lines to user WHOIS.
1511 #<module name="m_swhois.so">
1513 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1514 # Test command module: Does nothing significant. Read: pointless.
1515 #<module name="m_testcommand.so">
1517 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1518 # Timed bans module: Adds timed bans and the /TBAN command
1519 #<module name="m_timedbans.so">
1521 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1522 # Test line module: Adds the /TLINE command, used to test how many
1523 # users a /GLINE or /ZLINE etc would match.
1524 #<module name="m_tline.so">
1526 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1527 # Uninvite module: Adds the /UNINVITE command which lets users remove
1528 # pending invites from channels without waiting for the user to join.
1529 #<module name="m_uninvite.so">
1531 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1532 # Userip module: Adds the /USERIP command
1533 #<module name="m_userip.so">
1535 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1536 # Vhost module: Adds the VHOST command which allows for adding virtual
1537 # hosts which are accessible using a username and password in the config.
1538 #<module name="m_vhost.so">
1540 #-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1542 # user - Username for the vhost. #
1544 # pass - Password for the vhost. #
1546 # host - Vhost to set. #
1548 #<vhost user="some_username" pass="some_password" host="some.host">
1550 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1551 # Watch module: Adds the WATCH command, which is used by clients to
1552 # maintain notify lists.
1553 #<module name="m_watch.so">
1555 #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
1557 # The ban tags define nick masks, host masks and ip ranges which are #
1558 # banned from your server. All details in these tags are local to #
1562 # badip lines ban an ip range (same as a zline) #
1564 # ipmask - The ip range to ban (wildcards possible) #
1565 # CIDR is supported in the IP mask. #
1566 # reason - Reason to display when disconnected #
1568 # badnick lines ban a nick mask (same as a qline) #
1570 # nick - Nick mask to ban (wildcards possible) #
1571 # reason - Reason to display on /NICK #
1573 # badhost lines ban a user@host mask (same as a kline) #
1575 # host - ident@hostname (wildcards possible) #
1576 # If you specify an IP, CIDR is supported. #
1577 # reason - Reason to display on disconnection #
1579 # exception lines define a hostmask that is excempt from [kzg]lines #
1581 # host - ident@hostname (wildcards possible) #
1582 # If you specify an IP, CIDR is supported. #
1583 # reason - Reason, shown only in /stats e #
1586 <badip ipmask="69.69.69.69" reason="No porn here thanks.">
1588 <badnick nick="ChanServ" reason="Reserved For Services">
1589 <badnick nick="NickServ" reason="Reserved For Services">
1590 <badnick nick="OperServ" reason="Reserved For Services">
1591 <badnick nick="MemoServ" reason="Reserved For Services">
1593 <badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots">
1594 <badhost host="*@localhost" reason="No irc from localhost!">
1595 <badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
1597 <exception host="*@ircop.host.com" reason="Opers hostname">
1599 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1601 # You should already know what to do here :) #
1603 <die value="No, i wasnt joking. You should probably edit your config *PROPERLY* and try again.">
1606 #########################################################################
1608 # - InspIRCd Development Team - #
1609 # http://www.inspircd.org #
1611 #########################################################################