1 ########################################################################
3 # ___ ___ ____ ____ _ #
4 # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
5 # | || '_ \/ __| '_ \| || |_) | | / _` | #
6 # | || | | \__ \ |_) | || _ <| |__| (_| | #
7 # |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
10 # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
11 # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
12 # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
13 # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
16 ##################################||####################################
18 ##################################||####################################
20 # This is an example of the config file for InspIRCd. #
21 # Change the options to suit your network #
24 # ____ _ _____ _ _ ____ _ _ _ #
25 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
26 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
27 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
28 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
30 # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
31 # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
32 # if you've configured InspIRCd before, these probably indicate #
33 # something new or different to this version and you SHOULD READ IT. #
35 ########################################################################
37 # Unalphabeticalise the modules list at your own risk #
39 ########################################################################
41 #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
43 # This optional tag allows you to include another config file #
44 # allowing you to keep your configuration tidy. The configuration #
45 # file you include will be treated as part of the configuration file #
46 # which includes it, in simple terms the inclusion is transparent. #
48 # All paths to config files are relative to the directory that the #
51 # You may also include an executable file, in which case if you do so #
52 # the output of the executable on the standard output will be added #
53 # to your config at the point of the include tag. #
55 # Syntax is as follows: #
56 #<include file="file.conf"> #
57 #<include executable="/path/to/executable parameters"> #
59 # Executable Include Example: #
60 #<include executable="/usr/bin/wget -q -O - http://mynet.net/inspircd.conf">
64 #-#-#-#-#-#-#-#-#-#-#-# VARIABLE DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
66 # You can define variables that will be substituted later in the #
67 # configuration file. This can be useful to allow settings to be #
68 # easily changed, or to parameterize a remote includes. #
70 # Variables may be redefined and may reference other variables. #
71 # Value expansion happens at the time the tag is read. #
73 # Using variable definitions REQUIRES that the config format be #
74 # changed to "xml" from the default "compat" that uses escape #
75 # sequences such as "\"" and "\n", and does not support <define> #
77 <define name="bindip" value="1.2.2.3">
78 <define name="localips" value="&bindip;/24">
80 #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
82 # Here is where you enter the information about your server. #
86 # name: Hostname of your server. Does not need to resolve, but
87 # does need to be correct syntax (something.somethingelse.tld).
88 name="penguin.omega.org.za"
90 # description: Server description. Spaces are allowed.
91 description="Waddle World"
93 # id: The SID to use for this server. This should not be uncommented
94 # unless there is a SID conflict. This must be three characters long.
95 # The first character must be a digit [0-9], the remaining two chars
96 # may be letters [A-Z] or digits.
99 # network: Network name given on connect to clients.
100 # Should be the same on all servers on the network and
101 # not contain spaces.
105 #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
107 # Describes the Server Administrator's real name (optionally), #
108 # nick, and email address. #
113 name="Johnny English"
115 # nick: Nickname (preferably what you use on the network)
118 # email: email address. Does not have to be valid
119 # but should be for the users to be able to contact you.
120 email="MI5@the.best.secret.agent">
123 #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
125 # Enter the port and address bindings here. #
128 # ____ _ _____ _ _ ____ _ _ _ #
129 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
130 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
131 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
132 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
134 # If you want to link servers to InspIRCd you must load the #
135 # m_spanningtree.so module! Please see the modules list below for #
136 # information on how to load this module! If you do not load this #
137 # module, server ports will NOT be bound! #
139 # PLEASE NOTE: If you have build InspIRCd with IPv6 support, you MUST #
140 # specify a bind address if you want the IRCd to bind to a IPv4 IP. #
143 # address: IP address to bind to if the box that you are hosting
144 # on has more than one IP, else the ircd will try to bind to all
145 # IP's on the box if this is not defined.
148 # port: Port for users or servers to be able to connect to.
149 # you can select multiple ports by separating them
150 # with a - character like the example below.
153 # type: Type of bind block this is. It can either be clients or
154 # servers. Whichever you select will be the only type able to connect
155 # to this bind section.
158 # ssl: If you want this bind section to use SSL, define either
159 # gnutls or openssl here. The appropriate SSL modules must be loaded
160 # for ssl to work. If you do not want this bind section to support ssl,
161 # just remove or comment out this option.
165 <bind address="" port="6660-6669" type="clients">
167 # When linking servers, the openssl and gnutls implementations are completely
168 # link-compatible and can be used alongside each other
169 # on each end of the link without any significant issues.
170 # Supported ssl types are: "openssl" and "gnutls".
171 # You must load, m_ssl_openssl for openssl
172 # or m_ssl_gnutls for gnutls.
174 <bind address="" port="7000,7001" type="servers">
175 <bind address="1.2.3.4" port="7005" type="servers" ssl="openssl">
178 #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
180 # You can configure the passwords here which you wish to use for #
181 # the die and restart commands. Only trusted IRCop's who will #
182 # need this ability should know the die and restart password. #
186 # hash: what hash these passwords are hashed with. requires the module
187 # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
188 # loaded and the password hashing module (m_password_hash.so)
189 # loaded. Options here are: "md5", "sha256" and "ripemd160".
190 # Optional, but recommended. Create hashed password with:
191 # /mkpasswd <hash> <password>
194 # diepass: Password for opers to use if they need to shutdown (die)
198 # restartpass: Password for opers to use if they need to restart
203 #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
205 # This is where you can configure which connections are allowed #
206 # and denied access onto your server. The password is optional. #
207 # You may have as many of these as you require. To allow/deny all #
208 # connections, use a '*' or 0.0.0.0/0. #
210 # -- It is important to note that connect tags are read from the -- #
211 # TOP DOWN. This means that you should have more specific deny #
212 # and allow tags at the top, progressively more general, followed #
213 # by a <connect allow="*" (should you wish to have one). #
215 # Connect blocks are searched twice for each user - once when the TCP #
216 # connection is accepted, and once when the user completes their #
217 # registration. Most of the information (hostname, ident response, #
218 # password, SSL when using STARTTLS, etc) is only available during #
219 # the second search, so if you are trying to make a closed server, #
220 # you will probably need a connect block just for user registration. #
221 # This can be done by using <connect registered="no"> #
224 # deny: Will not let people connect if they have specified host/IP.
227 # connect:reason is the message that users will see if they match a deny block
228 <connect deny="3ffe::0/32" reason="The 6bone address space is deprecated">
231 # name: Name to use for this connect block. Mainly used for
232 # connect class inheriting.
235 # parent: This setting is to specify if this connect class
236 # inherits settings from any other. Put the other class's name
237 # in here to use its settings as a template - for example, if
238 # you only want to adjust sendq and a password
241 # allow: What IP addresses/hosts to allow for this block.
244 # hash: what hash this password is hashed with. requires the module
245 # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
246 # loaded and the password hashing module (m_password_hash.so)
247 # loaded. Options here are: "md5", "sha256" and "ripemd160".
248 # Optional, but recommended. Create hashed password with:
249 # /mkpasswd <hash> <password>
252 # password: Password to use for this block/user(s)
255 # maxchans: Maximum number of channels a user in this class
256 # be in at one time. This overrides every other maxchans setting.
259 # timeout: How long (in seconds) the server will wait before
260 # disconnecting a user if they do not do anything on connect.
261 # (Note, this is a client-side thing, if the client does not
262 # send /nick, /user or /pass)
265 # localmax: Maximum local connections per IP (or CIDR mask, see below).
268 # globalmax: Maximum global (network-wide) connections per IP (or CIDR mask, see below).
271 # useident: Defines if users in this class MUST respond to a ident query or not.
274 # limit: How many users are allowed in this class
277 # modes: Usermodes that are set on users in this block on connect.
278 # Enabling this option requires that the m_conn_umodes module be loaded.
279 # This entry is highly recommended to use for/with IP Cloaking/masking.
280 # For the example to work, this also requires that the m_cloaking
281 # module be loaded as well.
284 # requireident, requiressl, requireaccount: require that users of this
285 # block have a valid ident response, use SSL, or have authenticated.
286 # Requires m_ident, m_sslinfo, or m_services_account respectively.
288 # NOTE: For requireaccount, you must complete the signon prior to full
289 # connection. Currently, this is only possible by using SASL
290 # authentication; passforward and PRIVMSG NickServ happen after
291 # your final connect block has been found.
293 # Alternate MOTD file for this connect class. The contents of this file are
294 # specified using <files secretmotd="filename"> or <execfiles ...>
297 # port: What port this user is allowed to connect on. (optional)
298 # The port MUST be set to listen in the bind blocks above.
302 # name: Name to use for this connect block. Mainly used for
303 # connect class inheriting.
306 # allow: What IP addresses/hosts to allow for this block.
309 # maxchans: Maximum number of channels a user in this class
310 # be in at one time. This overrides every other maxchans setting.
313 # timeout: How long (in seconds) the server will wait before
314 # disconnecting a user if they do not do anything on connect.
315 # (Note, this is a client-side thing, if the client does not
316 # send /nick, /user or /pass)
319 # pingfreq: How often (in seconds) the server tries to ping connecting clients.
322 # hardsendq: maximum amount of data allowed in a client's send queue
323 # before they are dropped. Keep this value higher than the length of
324 # your network's /LIST or /WHO output, or you will have lots of
325 # disconnects from sendq overruns!
328 # softsendq: amount of data in a client's send queue before the server
329 # begins delaying their commands in order to allow the sendq to drain
332 # recvq: amount of data allowed in a client's queue before they are dropped.
335 # threshold: This specifies the amount of command penalty a user is allowed to have
336 # before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
337 # ones such as /OPER have penalties up to 10.
339 # If you are not using fakelag, this should be at least 20 to avoid excess flood kills
340 # from processing some commands.
343 # commandrate: This specifies the maximum rate that commands can be processed.
344 # If commands are sent more rapidly, the user's penalty will increase and they will
345 # either be fakelagged or killed when they reach the threshold
347 # Units are millicommands per second, so 1000 means one line per second.
350 # fakelag: Use fakelag instead of killing users for excessive flood
352 # Fake lag stops command processing for a user when a flood is detected rather than
353 # immediately killing them; their commands are held in the recvq and processed later
354 # as the user's command penalty drops. Note that if this is enabled, flooders will
355 # quit with "RecvQ exceeded" rather than "Excess Flood".
358 # localmax: Maximum local connections per IP.
361 # globalmax: Maximum global (network-wide) connections per IP.
364 # useident: Defines if users in this class must respond to a ident query or not.
367 # limit: How many users are allowed in this class
370 # modes: Usermodes that are set on users in this block on connect.
371 # Enabling this option requires that the m_conn_umodes module be loaded.
372 # This entry is highly recommended to use for/with IP Cloaking/masking.
373 # For the example to work, this also requires that the m_cloaking
374 # module be loaded as well.
378 #-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
380 # CIDR configuration allows detection of clones and applying of #
381 # throttle limits across a CIDR range. (A CIDR range is a group of #
382 # IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
383 # represented as 192.168.1.0/24). This means that abuse across an ISP #
384 # is detected and curtailed much easier. Here is a good chart that #
385 # shows how many IPs the different CIDRs correspond to: #
386 # http://en.wikipedia.org/wiki/CIDR#Prefix_aggregation #
390 # ipv4clone: specifies how many bits of an IP address should be
391 # looked at for clones. The default only looks for clones on a
392 # single IP address of a user. You do not want to set this
393 # extremely low. (Values are 0-32).
396 # ipv6clone: specifies how many bits of an IP address should be
397 # looked at for clones. The default only looks for clones on a
398 # single IP address of a user. You do not want to set this
399 # extremely low. (Values are 0-128).
402 # This file has all the information about oper classes, types and o:lines.
403 # You *MUST* edit it.
404 <include file="conf/opers.conf.example">
406 # This file has all the information about server links and ulined servers.
407 # You *MUST* edit it if you intend to link servers.
408 <include file="conf/links.conf.example">
410 #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
413 # Files block - contains files whose contents are used by the ircd
415 # motd - displayed on connect and when a user executes /MOTD
416 # rules - displayed when the user executes /RULES
417 # Modules can also define their own files
418 <files motd="conf/inspircd.motd.example" rules="conf/inspircd.rules.example">
420 # Example of an executable file include. Note this will be read on rehash,
421 # not when the command is run.
422 #<execfiles rules="wget -O - http://www.example.com/rules.txt">
424 #-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
428 # users: Maximum number of channels a user can be in at once.
431 # opers: Maximum number of channels a oper can be in at once.
434 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
435 # If these values are not defined, InspIRCd uses the default DNS resolver
439 # server: DNS server to use to attempt to resolve IP's to hostnames.
440 # in most cases, you won't need to change this, as inspircd will
441 # automatically detect the nameserver depending on /etc/resolv.conf
442 # (or, on windows, your set nameservers in the registry.)
443 # Note that this must be an IP address and not a hostname, because
444 # there is no resolver to resolve the name until this is defined!
448 # timeout: seconds to wait to try to resolve DNS/hostname.
451 # An example of using an IPv6 nameserver
452 #<dns server="::1" timeout="5">
454 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
456 # Define the path to the PID file here. The PID file can be used to #
457 # rehash the ircd from the shell or to terminate the ircd from the #
458 # shell using shell scripts, perl scripts, etc... and to monitor the #
459 # ircd's state via cron jobs. If this is a relative path, it will be #
460 # relative to the configuration directory, and if it is not defined, #
461 # the default of 'inspircd.pid' is used. #
464 #<pid file="/path/to/inspircd.pid">
466 #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
468 # Use these tags to customise the ban limits on a per channel basis. #
469 # The tags are read from top to bottom, and any tag found which #
470 # matches the channels name applies the banlimit to that channel. #
471 # It is advisable to put an entry with the channel as '*' at the #
472 # bottom of the list. If none are specified or no maxbans tag is #
473 # matched, the banlist size defaults to 64 entries. #
476 <banlist chan="#morons" limit="128">
477 <banlist chan="*" limit="69">
479 #-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
481 # This tag is optional, and specifies one or more features which are #
482 # not available to non-operators. #
484 # For example you may wish to disable NICK and prevent non-opers from #
485 # changing their nicknames. #
486 # Note that any disabled commands take effect only after the user has #
487 # 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
488 # so for example disabling NICK will not cripple your network. #
490 # You can also define if you want to disable any channelmodes #
491 # or usermodes from your users. #
493 # `fakenonexistant' will make the ircd pretend that nonexistant #
494 # commands simply don't exist to non-opers ("no such command"). #
496 #<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">
499 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
501 # Just remove this... Its here to make you read ALL of the config #
504 <die value="You should probably edit your config *PROPERLY* and try again.">
508 #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
510 # Settings to define which features are usable on your server. #
514 # prefixquit: What (if anything) a users' quit message
515 # should be prefixed with.
518 # suffixquit: What (if anything) a users' quit message
519 # should be suffixed with.
522 # prefixpart: What (if anything) a users' part message
523 # should be prefixed with.
525 # NOTE: Use "\"" instead of """ if not using <config format="xml">
527 # suffixpart: What (if anything) a users' part message
528 # should be suffixed with.
531 # fixedquit: Set all users' quit messages to this value.
534 # fixedpart: Set all users' part messages in all channels
538 # syntaxhints: If enabled, if a user fails to send the correct parameters
539 # for a command, the ircd will give back some help text of what
540 # the correct parameters are.
543 # cyclehosts: If enabled, when a user gets a host set, it will cycle
544 # them in all their channels. If not, it will simply change their host
545 # without cycling them.
548 # cyclehostsfromuser: If enabled, the source of the mode change for
549 # cyclehosts will be the user who cycled. This can look nicer, but
550 # triggers anti-takeover mechanisms of some obsolete bots.
551 cyclehostsfromuser="no"
553 # ircumsgprefix: Use undernet-style message prefixing for NOTICE and
554 # PRIVMSG. If enabled, it will add users' prefix to the line, if not,
555 # it will just message the user normally.
558 # announcets: If set to yes, when the TimeStamp on a channel changes, all users
559 # in channel will be sent a NOTICE about it.
562 # allowmismatched: Setting this option to yes will allow servers to link even
563 # if they don't have the same VF_OPTCOMMON modules loaded. Setting this to
564 # yes may introduce some desyncs and weirdness.
567 # defaultbind: Sets the default for <bind> tags without an address. Choices are
568 # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
569 # falling back to IPv4 otherwise.
572 # hostintopic: If enabled, channels will show the host of the topicsetter
573 # in the topic. If set to no, it will only show the nick of the topicsetter.
576 # pingwarning: If a server does not respond to a ping within x seconds,
577 # it will send a notice to opers with snomask +l informing that the server
578 # is about to ping timeout.
581 # serverpingfreq: How often pings are sent between servers (in seconds).
584 # defaultmodes: What modes are set on a empty channel when a user
585 # joins it and it is unregistered. This is similar to Asuka's
589 # moronbanner: This is the text that is sent to a user when they are
590 # banned from the server.
591 moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
593 # exemptchanops: exemptions for channel access restrictions based on prefix.
594 exemptchanops="nonick:v flood:o"
596 # invitebypassmodes: This allows /invite to bypass other channel modes.
597 # (Such as +k, +j, +l, etc)
598 invitebypassmodes="yes">
601 #-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
605 # netbuffersize: Size of the buffer used to recieve data from clients.
606 # The ircd may only read this amount of text in 1 go at any time.
607 netbuffersize="10240"
609 # maxwho: Maximum number of results to show in a /who query.
612 # somaxconn: The maximum number of connections that may be waiting
613 # in the accept queue. This is *NOT* the total maximum number of
614 # connections per server. Some systems may only allow this to be up
615 # to 5, while others (such as linux and *BSD) default to 128.
618 # softlimit: This optional feature allows a defined softlimit for
619 # connections. If defined, it sets a soft max connections value.
620 # must be lower than ./configure maxclients.
623 # quietbursts: When syncing or splitting from a network, a server
624 # can generate a lot of connect and quit messages to opers with
625 # +C and +Q snomasks. Setting this to yes squelches those messages,
626 # which makes it easier for opers, but degrades the functionality of
627 # bots like BOPM during netsplits.
630 # nouserdns: If enabled, no DNS lookups will be performed on
631 # connecting users. This can save a lot of resources on very busy servers.
634 #-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
639 # announceinvites: If this option is set, then invites are announced
640 # to the channel when a user invites another user. If you consider
641 # this to be unnecessary noise, set this to 'none'.
642 # To announce to all ops, set this to 'ops' and to announce to all users,
643 # set the value to 'all'. The value 'dynamic' will make the messages
644 # go to every user who has power of INVITE on the channel. This
645 # is the recommended setting.
646 announceinvites="dynamic"
648 # hidemodes: If enabled, then the listmodes given will be hidden
649 # from users below halfop. This is not recommended to be set on +b
650 # as it may break some functionality in popular clients such as mIRC.
653 # hideulines: If this value is set to yes, U-lined servers will
654 # be hidden from non-opers in /links and /map.
657 # flatlinks: If this value is set to yes, /map and /links will
658 # be flattened when shown to non-opers.
661 # hidewhois: When defined, the given text will be used in place
662 # of the server a user is on when whoised by a non-oper. Most
663 # networks will want to set this to something like "*.netname.net"
664 # to conceal the actual server a user is on.
667 # hidebans: If this value is set to yes, when a user is banned ([gkz]lined)
668 # only opers will see the ban message when the user is removed
672 # hidekills: If defined, replaces who set a /kill with a custom string.
675 # hidesplits: If enabled, non-opers will not be able to see which
676 # servers split in a netsplit, they will only be able to see that one
677 # occurred (If their client has netsplit detection).
680 # maxtargets: Maximum number of targets per command.
681 # (Commands like /notice, /privmsg, /kick, etc)
684 # customversion: Displays a custom string when a user /version's
685 # the ircd. This may be set for security reasons or vanity reasons.
688 # operspywhois: show opers (users/auspex) the +s channels a user is in. Values:
689 # splitmsg Split with an explanatory message
690 # yes Split with no explanatory message
694 # runasuser: If this is set, InspIRCd will attempt to setuid
695 # to run as this user- allows binding of ports under 1024.
696 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
699 # runasgroup: If this is set, InspIRCd will attempt to set group
700 # to run under this group, which allows binding of ports under 1024
701 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
704 # restrictbannedusers: If this is set to yes, InspIRCd will not allow users
705 # banned on a channel to change nickname or message channels they are
707 restrictbannedusers="yes"
709 # genericoper: Setting this value to yes makes all opers on this server
710 # appear as 'is an IRC operator' in their WHOIS, regardless of their
711 # oper type, however oper types are still used internally. This only
712 # affects the display in WHOIS.
715 # userstats: /stats commands that users can run (opers can run all).
718 #-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
720 # This configuration tag defines the maximum sizes of various types #
721 # on IRC, such as the maximum length of a channel name, and the #
722 # maximum length of a channel. Note that with the exception of the #
723 # identmax value all values given here are the exact values you would #
724 # expect to see on IRC. This contrasts with the older InspIRCd #
725 # releases where these values would be one character shorter than #
726 # defined to account for a null terminator on the end of the text. #
728 # These values should match network-wide otherwise issues will occur. #
730 # The highest safe value you can set any of these options to is 500, #
731 # but it is recommended that you keep them somewhat #
732 # near their defaults (or lower). #
735 # maxnick: Maximum length of a nickname.
738 # maxchan: Maximum length of a channel name.
741 # maxmodes: Maximum number of mode changes per line.
744 # maxident: Maximum length of a ident/username.
747 # maxquit: Maximum length of a quit message.
750 # maxtopic: Maximum length of a channel topic.
753 # maxkick: Maximum length of a kick message.
756 # maxgecos: Maximum length of a GECOS (realname).
759 # maxaway: Maximum length of an away message.
763 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
767 # Logging is covered with the <log> tag, which you may use to change
768 # the behaviour of the logging of the IRCd.
770 # In InspIRCd as of 1.2, logging is pluggable and very extensible.
771 # Different files can log the same thing, different 'types' of log can
772 # go to different places, and modules can even extend the log tag
773 # to do what they want.
775 # An example log tag would be:
776 # <log method="file" type="OPER" level="default" target="opers.log">
777 # which would log all information on /oper (failed and successful) to
778 # a file called opers.log.
780 # There are many different types which may be used, and modules may
781 # generate their own. A list of useful types:
782 # - USERS - information relating to user connection and disconnection
783 # - CHANNELS - information relating to joining and parting of channels.
784 # XXX someone doc more on this
786 # You may also log *everything* by using a type of *, and subtract things out
787 # of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
789 # The following log tag is highly default and uncustomised. It is recommended you
790 # sort out your own log tags. This is just here so you get some output.
792 <log method="file" type="* -USERINPUT -USEROUTPUT" level="default" target="ircd.log">
794 #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
796 # This tag lets you define the behaviour of the /whowas command of #
801 # groupsize: Maximum entries per nick shown when performing
805 # maxgroups: Maximum number of nickgroups that can be added to
806 # the list so that /whowas does not use a lot of resources on
810 # maxkeep: Maximum time a nick is kept in the whowas list
811 # before being pruned. Time may be specified in seconds,
812 # or in the following format: 1y2w3d4h5m6s. Minimum is
816 #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
818 # The ban tags define nick masks, host masks and ip ranges which are #
819 # banned from your server. All details in these tags are local to #
824 # ipmask: IP range to ban. Wildcards and CIDR can be used.
827 # reason: Reason to display when user is disconnected.
828 reason="No porn here thanks.">
831 # nick: Nick to disallow. Wildcards are supported.
834 # reason: Reason to display on /nick.
835 reason="Reserved For Services">
837 <badnick nick="NickServ" reason="Reserved For Services">
838 <badnick nick="OperServ" reason="Reserved For Services">
839 <badnick nick="MemoServ" reason="Reserved For Services">
842 # host: ident@hostname to ban.
843 # Wildcards and CIDR (if you specify an IP) can be used.
844 host="*@hundredz.n.hundredz.o.1337.kiddies.com"
846 # reason: Reason to display when user is disconnected
847 reason="Too many 1337 kiddiots">
849 <badhost host="root@*" reason="Don't irc as root!">
850 <badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
852 # exception: Hosts that are exempt from [kgz]lines.
854 # host: ident@hostname to exempt.
855 # Wildcards and CIDR (if you specify an IP) can be used.
856 host="*@ircop.host.com"
858 # reason: Reason for exception. Only shown in /stats e
859 reason="Opers hostname">
861 #-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
863 # This optional tag allows you to specify how wide a gline, eline, #
864 # kline, zline or qline can be before it is forbidden from being #
865 # set. By setting hostmasks="yes", you can allow all G, K, E lines, #
866 # no matter how many users the ban would cover. This is not #
867 # recommended! By setting ipmasks="yes", you can allow all Z lines, #
868 # no matter how many users these cover too. Needless to say we #
869 # don't recommend you do this, or, set nickmasks="yes", which will #
874 # hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
877 # ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
880 # nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
883 # trigger: What percentage of users on the network to trigger
884 # specifying an insane ban as. The default is 95.5%, which means
885 # if you have a 1000 user network, a ban will not be allowed if it
886 # will be banning 955 or more users.
890 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
892 # You should already know what to do here :) #
894 <die value="User error. Insert new user and press any key. (you didn't edit your config properly.)">
896 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
897 # ____ _ _____ _ _ ____ _ _ _ #
898 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
899 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
900 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
901 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
903 # Well done, you've reached the end of the basic configuration, your #
904 # ircd should now start if you want to try it out! (./inspircd start) #
906 # We now suggest you read and edit modules.conf, as modules are what #
907 # provide almost all the features of InspIRCd. :) #
909 # The default does nothing -- we include it for simplicity for you. #
910 <include file="conf/modules.conf.example">
912 # Here are some pre-built modules.conf files that closely match the
913 # default configurations of some popular IRCd's. You still may want to
914 # look over them and make sure if everything is correct for you and setup
915 # the proper SSL information.
917 # *NOTE*: These files have no comments for what the modules do. If you
918 # are interested in that, please read the modules.conf.example. It is also
919 # recommended that you make your own modules file based on modules.conf.example.
921 # Settings similar to UnrealIRCd defaults.
922 #<include file="conf/modules/modules.conf.unreal">
924 # Settings similar to Charybdis IRCd defaults.
925 #<include file="conf/modules/modules.conf.charybdis">
928 #########################################################################
930 # - InspIRCd Development Team - #
931 # http://www.inspircd.org #
933 #########################################################################