1 ########################################################################
3 # ___ ___ ____ ____ _ #
4 # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
5 # | || '_ \/ __| '_ \| || |_) | | / _` | #
6 # | || | | \__ \ |_) | || _ <| |__| (_| | #
7 # |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
10 # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
11 # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
12 # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
13 # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
16 ##################################||####################################
18 ##################################||####################################
20 # This is an example of the config file for InspIRCd. #
21 # Change the options to suit your network #
23 # Last updated on : 04/09/2006 #
24 # Written by : CC (cc@backchat.co.za) #
25 # Updated by : katsklaw (katsklaw@gmail.com) #
26 # Updated by : brain (brain@inspircd.org) #
28 # ____ _ _____ _ _ ____ _ _ _ #
29 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
30 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
31 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
32 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
34 # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
35 # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
36 # if you've configured InspIRCd before, these probably indicate #
37 # something new or different to this version and you SHOULD READ IT. #
39 ########################################################################
41 # Unalphabeticalise the modules list at your own risk #
43 ########################################################################
46 #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
48 # Here is where you enter the information about your server. #
50 # Syntax is as follows: #
52 # <server name="server.name" #
53 # description="Server Description" #
54 # network="MyNetwork"> #
57 <server name="penguin.omega.org.za"
58 description="Waddle World"
62 #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
64 # Describes the Server Administrator's real name, nick #
65 # and email address. #
67 # Syntax is as follows: #
68 # <admin name="real name" #
70 # email="email@address.com"> #
73 <admin name="Johnny English"
75 email="MI5@the.best.secret.agent">
78 #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
80 # Enter the port and address bindings here. #
82 # bind address - specifies which address ports bind to. Leaving this #
83 # field blank binds the port to all IPs available. #
85 # port - The port number to bind to #
87 # type - can be 'clients' or 'servers'. The clients type is #
88 # a standard tcp based socket, the servers type is a #
89 # also a TCP based connection but of a different #
90 # format. SSL support is provided by modules, to #
91 # enable SSL support, please read the module section #
92 # of this configuration file. #
94 # ____ _ _____ _ _ ____ _ _ _ #
95 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
96 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
97 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
98 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
100 # If you want to link servers to InspIRCd you must load the #
101 # m_spanningtree module! Please see the modules list below for #
102 # information on how to load this module! If you do not load this #
103 # module, server ports will NOT be bound! #
105 # Leaving address empty binds to all available interfaces #
107 # Syntax is as follows: #
109 # <bind address="ip or host" port="port" type="clients"> #
110 # <bind address="ip or host" port="port" type="servers"> #
112 # If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, #
113 # then you must specify your IPV6 clients in the following form: #
114 # ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 address to bind the #
115 # port on. If InspIRCd is built for IPV4 connections (this is the #
116 # default) then you do not need to prefix your addresses like this. #
119 <bind address="" port="6660" type="clients">
120 <bind address="" port="7000" type="servers">
121 <bind address="" port="7001" type="servers">
124 #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
126 # You can configure the passwords here which you wish to use for #
127 # the die and restart commands. Only trusted ircops who will #
128 # need this ability should know the die and restart password. #
130 # Syntax is as follows: #
131 # <power diepass="die password" restartpass="restart password" #
132 # pause="secs before dying"> #
135 <power diepass="diepass" restartpass="restartpass" pause="2">
138 #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
140 # This optional tag allows you to include another config file #
141 # allowing you to keep your configuration tidy. The configuration #
142 # file you include will be treated as part of the configuration file #
143 # which includes it, in simple terms the inclusion is transparent. #
145 # All paths to config files are relative to the directory of the main #
146 # config file inspircd.conf, unless the filename starts with a forward#
147 # slash (/) in which case it is treated as an absolute path. #
149 # Syntax is as follows: #
150 #<include file="file.conf"> #
153 #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
155 # This is where you can configure which connections are allowed #
156 # and denied access onto your server. #
157 # The password is optional. #
158 # You may have as many of these as you require. #
159 # To allow/deny all connections use a * #
161 # Syntax is as follows: #
163 # <connect allow="ip mask"> #
164 # <connect allow="ip mask" password="blahblah"> #
165 # <connect allow="ip mask" password="blah" timeout="10"> #
166 # <connect allow="ip mask" timeout="blah" flood="5"> #
167 # <connect allow="ip mask" threshold="8" pingfreq="120"> #
168 # <connect allow="ip mask" sendq="99999" revcq="696969"> #
169 # <connect allow="ip mask" localmax="3" globalmax="3"> #
170 # <connect deny="ip mask"> #
172 # IP masks may be specified in CIDR format or wildcard format, #
173 # for IPV4 and IPV6. #
175 # You may optionally include timeout="x" on any allow line, which #
176 # specifies the amount of time given before an unknown connection #
177 # is closed if USER/NICK/PASS are not given. This value is in secs #
179 # You should also include a flood="x" line which indicates #
180 # the number of lines a user may place into their buffer at once #
181 # before they are disconnected for excess flood. This feature can #
182 # not be disabled, however it can be set to exremely high values, #
183 # rendering it effectively disabled. A recommended value is 10. #
184 # A counter is maintained for each user which is reset every #
185 # 'threshold' seconds and specifying this threshold value with #
186 # threshold="X" indicates how often the counter is reset. For #
187 # example, with flood="5" and threshold="8", the user may not send #
188 # more than 5 lines in 8 secs. #
190 # You may optionally specify the sendq size and ping frequency of #
191 # each connect:allow line using the pingfreq="X" and sendq="X" #
192 # settings as shown in the full example below. #
193 # The ping frequency is specified in seconds, and the sendq size #
194 # in bytes. It is recommended, although not enforced, that you #
195 # should never set your sendq size to less than 8k. Send Queues are #
196 # dynamically allocated and can grow as needed up to the maximum #
199 # The optional recvq value is the maximum size which users in this #
200 # group may grow their receive queue to. This is recommended to be #
201 # kept pretty low compared to the sendq, as users will always #
202 # recieve more than they send in normal circumstances. The default #
203 # if not specified is 4096. #
205 # IMPORTANT NOTE, CALL THE CONFUSION POLICE! #
206 # The sendq is the data waiting to be sent TO THE USER. #
207 # The recvq is the data being received FROM THE USER. #
208 # The names sendq and recvq are from the SERVER'S PERSPECTIVE not #
209 # that of the user... Just to clear up any confusion or complaints #
210 # that these are backwards :p #
212 # The localmax and globalmax values can be used to enforce local #
213 # and global session limits on connections. The session limits are #
214 # counted against all users, but applied only to users within the #
215 # class. For example, if you had a class 'A' which has a session #
216 # limit of 3, and a class 'B' which has a session limit of 5, and #
217 # somehow, two users managed to get into class B which also match #
218 # class A, there is only one connection left for this IP now in A, #
219 # but if they can connect again to B, there are three. You get the #
223 <connect allow="196.12.*" password="secret">
224 <connect allow="*" timeout="60" flood="20" threshold="1" pingfreq="120" sendq="262144" recvq="8192" localmax="3" globalmax="3">
226 <connect deny="69.254.*">
227 <connect deny="3ffe::0/32">
230 #-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
232 # Classes are a group of commands which are grouped together #
233 # and given a unique name. They used to define which commands #
234 # are available to certain types of Operators. #
236 # Syntax is as follows: #
238 # <class name="name" commands="oper commands"> #
240 # ____ _ _____ _ _ ____ _ _ _ #
241 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
242 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
243 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
244 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
246 # You are not forced to give these classes the names given below. #
247 # You can create your own named classes, if you want, in fact that #
248 # is the whole idea of this system! #
250 # Note: It is possible to make a class which covers all available #
251 # commands. To do this, specify commands="*". This is not really #
252 # recommended, as it negates the whole purpose of the class system, #
253 # however it is provided for fast configuration (e.g. in test nets) #
256 <class name="Shutdown" commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOAD">
257 <class name="ServerLink" commands="CONNECT SQUIT RCONNECT MKPASSWD MKSHA256">
258 <class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE">
259 <class name="OperChat" commands="WALLOPS GLOBOPS SETIDLE SPYLIST SPYNAMES">
260 <class name="HostCloak" commands="SETHOST SETIDENT SETNAME CHGHOST CHGIDENT">
263 #-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-#
265 # This is where you specify which types of operators you have on #
266 # your server, as well as the commands they are allowed to use. #
267 # This works alongside with the classes specified above. #
269 # type name - a name for the combined class types #
270 # a type name cannot contain spaces, however if you #
271 # put an _ symbol in the name, it will be translated #
272 # to a space when displayed in a WHOIS. #
274 # classes - specified above, used for flexibility for the #
275 # server admin to decide on which operators get #
276 # what commands. Class names are case sensitive, #
277 # seperate multiple class names with spaces. #
279 # host - optional hostmask operators will recieve on oper-up. #
281 # Syntax is as follows: #
283 # <type name="name" classes="class names" host="oper hostmask"> #
285 # ____ _ _____ _ _ ____ _ _ _ #
286 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
287 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
288 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
289 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
291 # You are not forced to give these types the names given below. #
292 # You can create your own named types, if you want, in fact that #
293 # is the whole idea of this system! #
296 <type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za">
297 <type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za">
298 <type name="Helper" classes="HostCloak" host="helper.omega.org.za">
301 #-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
303 # Opers are defined here. This is a very important section. #
304 # Remember to only make operators out of truthworthy people. #
306 # name - oper name, This is case sensitive, so it is best to #
309 # password - password to oper-up, also case sensitive. #
310 # encryption is supported via modules. You may load #
311 # modules for MD5 or SHA256 encryption, and if you do, #
312 # this value will be a hash value, otherwise put a #
313 # plaintext password in this value. #
315 # host - hosts of client allowed to oper-up. #
316 # wildcards accepted, seperate multiple hosts with a #
317 # space. You may also specify CIDR ip addresses. #
319 # fingerprint - When using the m_ssl_oper_cert.so module, you may #
320 # specify a key fingerprint here. This can be obtained #
321 # using the /fingerprint command whilst the module is #
322 # loaded, or from the notice given to you when you #
323 # connect to the ircd using a client certificate, #
324 # and will lock this oper block to only the user who #
325 # has that specific key/certificate pair. #
326 # This enhances security a great deal, however it #
327 # requires that opers use clients which can send ssl #
328 # client certificates, if this is configured for that #
329 # oper. Note that if the m_ssl_oper.so module is not #
330 # loaded, and/or one of m_ssl_openssl or m_ssl_gnutls #
331 # is not loaded, this configuration option has no #
332 # effect and will be ignored. #
334 # type - Sefines the kind of operator. This must match a type #
335 # tag you defined above, and is case sensitive. #
337 # Syntax is as follows: #
338 # <oper name="login" #
340 # host="hostmask@of.oper" #
341 # fingerprint="hexsequence" #
342 # type="oper type"> #
345 <oper name="katsklaw"
347 host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16"
348 fingerprint="a41d730937a53b79f788c0ab13e9e1d5"
352 #-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-#
354 # Defines which servers can link to this one, and which servers this #
355 # server may create outbound links to. #
357 # name - The name is the canocial name of the server, does #
358 # not have to resolve - but it is expected to be set #
359 # in the remote servers connection info. #
361 # ipaddr - Valid host or ip address for remote server. These #
362 # hosts are resolved on rehash, and cached, if you #
363 # specify a hostname, so if you find that your server #
364 # is still trying to connect to an old IP after you #
365 # have updated your dns, try rehashing and then #
366 # attempting the connect again. #
368 # port - The TCP port for the remote server. #
370 # sendpass - Password to send to create an outbound connection #
373 # recvpass - Password to receive to accept an inbound connection #
374 # from this server. #
376 # autoconnect - Sets the server to autoconnect. Where x is the num. #
377 # (optional) of seconds between attempts. e.g. 300 = 5 minutes. #
379 # encryptionkey - Encryption key to be used for AES encryption, where #
380 # supported. Links using the spanning tree protocol #
381 # support AES. The encryption key must be EXACTLY 8, #
382 # 16 or 32 characters in length for a 64, 128 or 256 #
383 # bit key, respectively. #
385 # hidden - When using m_spanningtree.so for linking. you may #
386 # set this to 'yes', and if you do, the IP address/ #
387 # hostname of this connection will NEVER be shown to #
388 # any opers on the network. In /STATS c its address #
389 # will show as *@<hidden>, and during CONNECT and #
390 # inbound connections, its IP will show as <hidden> #
391 # UNLESS the connection fails (e.g. due to a bad #
392 # password or servername) #
394 # allowmask - When this is defined, it indicates a range of IP #
395 # addresses to allow for this link (You may use CIDR #
396 # or wildcard form for this address). #
397 # e.g. if your server is going to connect to you from #
398 # the range 1.2.3.1 through 1.2.3.255, put 1.2.3.0/24 #
399 # into this value. If it is not defined, then only #
400 # the ipaddr field of the server shall be allowed. #
402 # failover - If you define this option, it must be the name of a #
403 # different link tag in your configuration. This #
404 # option causes the ircd to attempt a connection to #
405 # the failover link in the event that the connection #
406 # to this server fails. For example, you could define #
407 # two hub uplinks to a leaf server, and set an #
408 # american server to autoconnect, with a european #
409 # hub as its failover. In this situation, your ircd #
410 # will only try the link to the european hub if the #
411 # american hub is unreachable. NOTE that for the #
412 # intents and purposes of this option, an unreachable #
413 # server is one which DOES NOT ANSWER THE CONNECTION. #
414 # If the server answers the connection with accept(), #
415 # EVEN IF THE CREDENTIALS ARE INVALID, the failover #
416 # link will not be tried! Failover settings will also #
417 # apply to autoconnected servers as well as manually #
420 # to u:line a server (give it extra privilages required for running #
421 # services, Q, etc) you must include the <uline server> tag as shown #
422 # in the example below. You can have as many of these as you like. #
424 # WARNING: Unlike other ircds, u:lining a server allows ALL users on #
425 # that server to operoverride modes. This should only be used for #
426 # services and protected oper servers! #
428 # NOTE: If you have built InspIRCd with IPV6 support, and you want #
429 # to link to an IPV4 server, you must specify the IP address in the #
430 # form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
431 # server. If you have built InspIRCd for IPV4 (this is the default) #
432 # you should not prefix your IP addresses in this fashion. #
434 # ____ _ _____ _ _ ____ _ _ _ #
435 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
436 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
437 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
438 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
440 # If you want to link servers to InspIRCd you must load the #
441 # m_spanningtree module! Please see the modules list below for #
442 # information on how to load this module! If you do not load this #
443 # module, server links will NOT work! #
446 <link name="hub.penguin.org"
447 ipaddr="penguin.box.com"
449 allowmask="69.58.44.0/24"
451 failover="hub.other.net"
452 sendpass="outgoing!password"
453 recvpass="incoming!password">
455 <link name="services.antarctic.com"
458 allowmask="127.0.0.0/8"
460 recvpass="polarbears">
462 <uline server="services.antarctic.com">
465 #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
467 # These options let you define the path to your motd and rules #
468 # files. These should be absolute paths. #
471 <files motd="/home/cc/inspircd/conf/inspircd.motd"
472 rules="/home/cc/inspircd/conf/inspircd.rules">
474 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
476 # Define your DNS server address here. InspIRCd has its own resolver. #
477 # If you do not define this value, the first dns server from your #
478 # /etc/resolv.conf file is read. If no entries are found in this file #
479 # or the file cannot be opened, the default value '127.0.0.1' is used #
480 # instead. The timeout value is in seconds. #
482 # ____ _ _____ _ _ ____ _ _ _ #
483 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
484 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
485 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
486 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
488 # When choosing a server, be sure to choose one which will do a #
489 # RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these #
490 # recursive lookups itself, to save time and resources. The dns #
491 # server recommended by the InspIRCd team is bind, available from the #
492 # ISC website. If your DNS server does not do a recursive lookup, you #
493 # will be able to notice this by the fact that none of your users are #
494 # resolving even though the DNS server appears to be up! Most ISP and #
495 # hosting provider DNS servers support recursive lookups. #
497 # NOTE: If you have built InspIRCd with IPV6 support, and you want #
498 # to use an IPV4 nameserver, you must specify the IP address in the #
499 # form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
500 # server. If you have built InspIRCd for IPV4 (this is the default) #
501 # you should not prefix your IP addresses in this fashion. #
503 # IF YOUR RESOLV.CONF CONTAINS ONLY IPV4 ADDRESSES, AND YOU ARE USING #
504 # IPV6, YOU MUST DEFINE THE <DNS SERVER> TAG, AND USE THE ::FFFF #
505 # PREFIX NOTATION. IF YOU DO NOT, HOSTS WILL *NOT* RESOLVE. #
508 <dns server="127.0.0.1" timeout="5">
510 # An example of using IPV4 nameservers over IPV6
511 #<dns server="::ffff:127.0.0.1" timeout="5">
513 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
515 # Define the path to the PID file here. The PID file can be used to #
516 # rehash the ircd from the shell or to terminate the ircd from the #
517 # shell using shell scripts, perl scripts etc, and to monitor the #
518 # ircd's state via cron jobs. This is IMPORTANT and you must define #
519 # it or the ircd will refuse to start. #
522 <pid file="/path/to/inspircd.pid">
524 #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
526 # Use these tags to customise the ban limits on a per channel basis. #
527 # the tags are read from top to bottom, and any tag found which #
528 # matches the channels name applies the banlimit to that channel. #
529 # It is advisable to put an entry with the channel as '*' at the #
530 # bottom of the list. If none are specified or no maxbans tag is #
531 # matched, the banlist size defaults to 64 entries. #
534 <banlist chan="#morons" limit="128">
535 <banlist chan="*" limit="69">
537 #-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
539 # This tag is optional, and specifies one or more commands which are #
540 # not available to non-operators. For example you may wish to disable #
541 # NICK and prevent non-opers from changing their nicknames. #
542 # Note that any disabled commands take effect only after the user has #
543 # 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
544 # so for example disabling NICK will not cripple your network. #
547 #<disabled commands="TOPIC MODE">
550 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
552 # Just remove this... Its here to make you read ALL of the config #
555 <die value="You should probably edit your config *PROPERLY* and try again.">
559 #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
561 # Settings to define which features are useable on your server. #
563 # prefixquit - a prefix for a client's quit message #
565 # loglevel - specifies what detail of messages to log in the #
566 # log file. You may select from debug, verbose, #
567 # default, sparse and none. #
569 # allowhalfop - allows the +h channel mode #
571 # noservices - If noservices is true, yes, or 1, then the first #
572 # user into a channel gets founder status. This is #
573 # only useful on networks running the m_chanprotect #
574 # module without services. #
576 # qaprefixes - If qaprefixes is true, yes, or 1, then users #
577 # with +q or +a will get the ~ or & prefixes #
578 # used in unreal. This is only useful on networks #
579 # running the m_chanprotect module #
581 # cyclehosts - If this is set to true, yes or 1, then when a #
582 # user's hostname changes, they will appear to quit #
583 # and then rejoin with their new host. This prevents #
584 # clients from being confused by host changes, #
585 # especially in the case of bots, and it is #
586 # recommended that this option is enabled. #
588 # netbuffersize - size of the buffer used to receive data from #
589 # clients. The ircd may only read() this amount #
590 # of text in one go at any time. (OPTIONAL) #
592 # maxwho - The maximum number of results returned by a /WHO #
593 # query. This is to prevent /WHO being used as a #
594 # spam vector or means of flooding an ircd. The #
595 # default is 128, it is not recommended to raise it #
596 # above 1024. Values up to 65535 are permitted. #
598 # somaxconn - The maximum number of sockets that may be waiting #
599 # in the accept queue. This usually allows the ircd #
600 # to soak up more connections in a shorter space of #
601 # time when increased but please be aware there is a #
602 # system defined maximum value to this, the same way #
603 # there is a system defined maximum number of file #
604 # descriptors. Some systems may only allow this to #
605 # be up to 5 (ugh) while others such as FreeBSD will #
606 # default to a much nicer 128. #
608 # moduledir - This optional value indicates a runtime change of #
609 # the location where modules are to be found. This #
610 # does not add a supplementary directory. There can #
611 # only be one module path. #
613 # softlimit - This optional feature allows a defined softlimit. #
614 # if defined sets a soft maxconnections value, has #
615 # to be less than the ./configure maxclients #
617 # operonlystats - The operonlystats field is optional and specifies #
618 # which stats characters in /STATS may only be #
619 # requested by an IRC operator. Stats characters in #
620 # this field are case sensitive and enforced as #
621 # oper-only independent of if they are in a module #
624 # operspywhois - If this is set then when an IRC operator uses #
625 # /WHOIS on a user they will see all channels, even #
626 # ones if channels are secret (+s), private (+p) or #
627 # if the target user is invisible +i. #
629 # customversion - If you specify this configuration item, and it is #
630 # not set to an empty value, then when a user does #
631 # a /VERSION command on the ircd, this string will #
632 # be displayed as the second portion of the output, #
633 # replacing the system 'uname', compile flags and #
634 # socket engine/dns engine names. You may use this #
635 # to enhance security, or simply for vanity. #
637 # maxtargets - The maxtargets field is optional, and if not #
638 # defined, defaults to 20. It indicates the maximum #
639 # number of targets which may be given to commands #
640 # such as PRIVMSG, KICK etc. #
642 # hidesplits - When set to 'yes', will hide split server names #
643 # from non-opers. Non-opers will see '*.net *.split' #
644 # instead of the server names in the quit message, #
645 # identical to the way IRCu displays them. #
647 # hidebans - When set to 'yes', will hide gline, kline, zline #
648 # and qline quit messages from non-opers. For #
649 # example, user A who is not an oper will just see #
650 # (G-Lined) while user B who is an oper will see the #
651 # text (G-Lined: Reason here) instead. #
653 # hidewhois - When defined with a non-empty value, the given #
654 # text will be used in place of the user's server #
655 # in WHOIS, when a user is WHOISed by a non-oper. #
656 # For example, most nets will want to set this to #
657 # something like '*.netname.net' to conceal the #
658 # actual server the user is on. #
660 # flatlinks - When you are using m_spanningtree.so, and this #
661 # value is set to true, yes or 1, /MAP and /LINKS #
662 # will be flattened when shown to a non-oper. #
664 # hideulines - When you are using m_spanningtree.so, and this #
665 # value is set to true, yes or 1, then U-lined #
666 # servers will be hidden in /LINKS and /MAP. For non #
667 # opers. Please be aware that this will also hide #
668 # any leaf servers of a U-lined server, e.g. jupes. #
670 # tempdir - If defined, indicates a path where modules will be #
671 # temporarily copied before loading. If not defined, #
672 # defaults to /tmp. #
674 # nouserdns - If set to 'yes', 'true' or '1', no user dns #
675 # lookups will be performed for connecting users. #
676 # this can save a lot of resources on very busy irc #
679 # syntaxhints - If set to 'yes', 'true' or '1', when a user does #
680 # not give enough parameters for a command, a syntax #
681 # hint will be given (using the RPL_TEXT numeric) #
682 # as well as the standard ERR_NEEDMOREPARAMS. #
685 <options prefixquit="Quit: "
687 netbuffersize="10240"
693 operonlystats="oclgkz"
709 #-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
711 # These tags define which modules will be loaded on startup by your #
712 # server. Add modules without any paths. When you make your ircd #
713 # using the 'make' command, all compiled modules will be moved into #
714 # the folder you specified when you ran ./configure. The module tag #
715 # automatically looks for modules in this location. #
716 # If you attempt to load a module outside of this location, either #
717 # in the config, or via /LOADMODULE, you will receive an error. #
719 # By default, ALL modules are commented out. You must uncomment them #
720 # or add lines to your config to load modules. Please refer to #
721 # http://www.inspircd.org/wiki/Modules_List for a list of modules and#
722 # each modules link for any additional conf tags they require. #
724 # ____ _ _____ _ _ ____ _ _ _ #
725 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
726 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
727 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
728 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
730 # To link servers to InspIRCd, you MUST load the m_spanningtree #
731 # module, as shown below. If you DO NOT do this, server links will #
732 # NOT work at all. ie. The ports will NOT bind, and /connect will not #
733 # work properly. This is by design, to allow for the implementation #
734 # of other linking protocols in modules in the future. #
736 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
737 # Spanning Tree module - allows linking of servers using the spanning
738 # tree protocol (see the READ THIS BIT section above).
740 #<module name="m_spanningtree.so">
742 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
743 # Alias module: Allows you to define server-side command aliases
744 #<module name="m_alias.so">
746 #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
748 # If you have the m_alias.so module loaded, you may also define #
749 # aliases as shown below. They are commonly used to provide shortcut #
750 # commands to services, however they are not limited to just this use.#
751 # An alias tag requires the following values to be defined in it: #
753 # text - The text to detect at the start of the line, #
754 # must be at the start of the line to trigger the #
755 # alias. Cant contain spaces, but case insensitive #
756 # replace - The text to replace 'text' with. Usually this #
757 # will be "PRIVMSG ServiceName :$2-" or similar. #
758 # You may use the variables $1 through $9 in the #
759 # replace string, which refer to the first through #
760 # ninth word in the original string typed by the #
761 # user. You may also use $1- through $9- which #
762 # refer to the first word onwards, through to the #
763 # ninth word onwards, e.g. if the user types the #
764 # command "foo bar baz qux quz" then $3- will hold #
765 # "baz qux quz" and $2 will contain "bar". You may #
766 # also use the special variables: $nick, $ident, #
767 # $host and $vhost, and you may seperate multiple #
768 # commands with \n. If you wish to use the ACTUAL #
769 # characters \ and n together in a line, you must #
770 # use the sequence "\\n". #
771 # requires - If you provide a value for 'requires' this means #
772 # the given nickname MUST be online for the alias #
773 # to successfully trigger. If they are not, then #
774 # the user receives a 'no such nick' 401 numeric. #
775 # uline - Defining this value with 'yes', 'true' or '1' #
776 # will ensure that the user given in 'requires' #
777 # must also be on a u-lined server, as well as #
778 # actually being on the network. If the user is #
779 # online, but not on a u-lined server, then an #
780 # oper-alert is sent out as this is possibly signs #
781 # of a user trying to impersonate a service. #
782 # operonly - Defining this value, with a value of 'yes', '1' #
783 # or true will make the alias oper only. If a non- #
784 # oper attempts to use the alias, it will appear #
787 #<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
788 #<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
789 #<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
790 #<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
791 #<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
792 #<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
793 #<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $3" requires="NickServ" uline="yes">
795 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
796 # Antibear security module: Prevents 'bear.txt' based trojans from
797 # connecting to your network by sending them a numeric they can't handle.
798 #<module name="m_antibear.so">
800 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
801 # Antibottler module: Labels bottler leech bots
802 #<module name="m_antibottler.so">
804 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
805 # Ban except module: Adds support for channel ban exceptions (+e)
806 #<module name="m_banexception.so">
808 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
809 # Block amsg module: Attempt to block all usage of /amsg and /ame
810 #<module name="m_blockamsg.so">
812 #-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
814 # If you have the m_blockamsg.so module loaded, you can configure it #
815 # with the <blockamsg> tag: #
817 # delay - How many seconds between two messages to force #
818 # them to be recognised as unrelated. #
819 # action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
820 # or 'killopers'. Define how to take action when #
821 # a user uses /amsg or /ame. #
823 #<blockamsg delay="3" action="killopers">
825 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
826 # Block CAPS module: Blocking all-CAPS messages with cmode +P
827 #<module name="m_blockcaps.so">
829 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
830 # Block colour module: Blocking colour-coded messages with cmode +c
831 #<module name="m_blockcolor.so">
833 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
834 # Botmode module: Adds the user mode +B
835 #<module name="m_botmode.so">
837 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
838 # CBAN module: Lets you disallow channels from being used at runtime.
839 #<module name="m_cban.so">
841 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
842 # Censor module: Adds the channel mode +G
843 #<module name="m_censor.so">
845 #-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
847 # Optional - If you specify to use the m_censor module, then specfiy #
848 # below the path to the censor.conf file. See also: #
849 # Censor file, see http://www.inspircd.org/wiki/Censor_Module #
851 #<censor file="/path/to/censor.conf">
853 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
854 # Channel filter module: Allows channel-op defined message
855 # filtering using simple string matches (channel mode +g)
856 #<module name="m_chanfilter.so">
858 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
859 # Chanprotect module: gives +q and +a channel modes
860 #<module name="m_chanprotect.so">
862 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
863 # CHGHOST module: Adds the /CHGHOST command
864 #<module name="m_chghost.so">
866 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
867 # CHGIDENT module: Adds the /CHGIDENT command
868 #<module name="m_chgident.so">
870 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
871 # Cloaking module: Adds usermode +x and cloaking support
872 #<module name="m_cloaking.so">
874 #-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
876 # Optional - If ypu specify the m_cloaking.so module as above, you #
877 # must define cloak keys, and optionally a cloak prefix as shown #
878 # below. When using cloaking, the cloak keys are MANDITORY and must #
879 # be included. However, if prefix is not included, it will default #
880 # to your networks name from the <server> tag. #
882 # <cloak key1="543241423" #
883 # key2="5378410432" #
884 # key3="1143242382" #
885 # key4="9504324581" #
888 # Please note that the key values will accept any number, and should #
889 # be large numbers. Using small numbers such as "7" or "1924" will #
890 # seriously weaken the security of your cloak. #
892 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
893 # Conn-Lusers: Shows the LUSERS output on connect
894 #<module name="m_conn_lusers.so">
896 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
897 # Conn-Usermodes: Set modes on users when they connect
898 # When this module is loaded <connect:allow> tags may have an optional
899 # modes="" value, which contains modes to add or remove from users
900 # when they connect to the server.
901 #<module name="m_conn_umodes.so">
903 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
904 # Conn-Wait-for-Pong: Don't let a user connect until they PONG
905 #<module name="m_conn_waitpong.so">
907 #-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
909 # If you have the m_conn_waitpong.so module loaded, configure it with #
910 # the <waitpong> tag: #
912 # sendsnotice - Whether to send a snotice on connect, like other #
915 # killonbadreply - Whether to kill the user if they send the wrong #
918 #<waitpong sendsnotice="yes" killonbadreply="yes">
920 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
921 # Connection throttle module. Configuration:
922 #<module name="m_connflood.so">
924 #-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
925 # seconds, maxconns - Amount of connections per <seconds>.
927 # timeout - Time to wait after the throttle was activated
928 # before deactivating it. Be aware that the time
929 # is seconds + timeout.
931 # quitmsg - The message that users get if they attempt to
932 # connect while the throttle is active.
934 # bootwait - Amount of time to wait before enforcing the
935 # throttling when the server just booted.
937 #<connflood seconds="30" maxconns="3" timeout="30"
938 # quitmsg="Throttled" bootwait="10">
940 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
941 # Deny Channels: Deny Channels from being used by users
942 #<module name="m_denychans.so">
944 #-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
946 # If you have the m_denychans.so module loaded, you need to specify #
947 # the channels to deny: #
949 # name - The channel name to deny. #
951 # allowopers - If operators are allowed to override the deny. #
953 # reason - Reason given for the deny. #
955 #<badchan name="#gods" allowopers="yes" reason="Tortoises!">
957 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
958 # Devoice Module: Let users devoice themselves.
959 #<module name="m_devoice.so">
961 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
962 # Filter module: Provides glob-based message filtering
963 #<module name="m_filter.so">
965 # PCRE filter module: Filters messages using regular expressions
966 #<module name="m_filter_pcre.so">
968 #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
970 # Optional - If you specify to use the m_filter or m_filter_pcre #
971 # modules, then specfiy below the path to the filter.conf file. #
973 #<filter file="/path/to/inspircd/filter.conf">
975 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
976 # Foobar module: does nothing - historical relic
977 #<module name="m_foobar.so">
979 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
980 # Globops module: gives /GLOBOPS and usermode +g
981 #<module name="m_globops.so">
983 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
984 # Global load module: Allows loading and unloading of modules network-
985 # wide (USE WITH EXTREME CAUTION!)
986 #<module name="m_globalload.so">
988 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
989 # HELPOP module: Provides the /HELPOP command
990 #<module name="m_helpop.so">
992 #-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
994 # Optional - If you specify to use the m_helpop.so module, then #
995 # specify below the path to the helpop.conf file. #
997 #<helpop file="/path/to/inspircd/helpop.conf">
999 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1000 # Hostchange module: Allows a different style of cloaking
1001 #<module name="m_hostchange.so">
1003 #-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
1005 # Optional - If you choose to use the m_hostchange.so module. #
1006 # Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
1008 #<host suffix="polarbears.org">
1009 #<hostchange mask="*@fbi.gov" action="addnick">
1010 #<hostchange mask="*r00t@*" action="suffix">
1011 #<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
1013 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1014 # httpd module: Provides http server support for InspIRCd
1015 #<module name="m_httpd.so">
1017 #-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1019 # Optional - If you choose to use the m_httpd.so module, then you must
1020 # specify the port number and other details of your http server:
1022 #<http ip="192.168.1.10" host="brainwave" port="32006"
1023 # index="/home/brain/inspircd/http/index.html">
1025 # You may have as many of these tags as you wish, each with a different
1026 # IP, port, host or index file. Each one will act as an independent
1030 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1031 # http stats module: Provides basic stats pages over HTTP
1032 # Requires m_httpd.so to be loaded for it to function.
1033 #<module name="m_httpd_stats.so">
1035 #-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
1037 #<httpstats stylesheet="http://remote.style/sheet.css">
1040 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1041 # Ident: Provides RFC 1413 ident lookup support
1042 #<module name="m_ident.so">
1044 #-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1046 # Optional - If you are using the m_ident.so module, then you can #
1047 # specify the timeout for ident lookups here. If not defined, it will #
1048 # default to one second. This is a non-blocking timeout which holds #
1049 # the user in a 'connecting' state until the lookup is complete. #
1051 #<ident timeout="5">
1053 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1054 # Invite except module: Adds support for channel invite exceptions (+I)
1055 #<module name="m_inviteexception.so">
1057 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1058 # Join flood module: Adds support for join flood protection (+j)
1059 #<module name="m_joinflood.so">
1061 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1062 # Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
1063 #<module name="m_kicknorejoin.so">
1065 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1066 # Knock module: adds the /KNOCK command and +K channel mode
1067 #<module name="m_knock.so">
1069 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1070 # Msg flood module: Adds message/notice flood protection (+f)
1071 #<module name="m_messageflood.so">
1073 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1074 # MySQL module: Allows other SQL modules to access MySQL databases
1075 # through a unified API. You must copy the source for this module
1076 # from the directory src/modules/extra, plus the file m_sqlv2.h
1077 #<module name="m_mysql.so">
1079 #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1081 # m_mysql.so is more complex than described here, see the wiki for #
1082 # more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
1084 #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
1086 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1087 # NAMESX module: Provides support for the NAMESX extension which allows
1088 # clients to see all the prefixes set on a user without getting confused.
1089 # This is supported by mIRC, x-chat, klient, and maybe more.
1090 #<module name="m_namesx.so">
1092 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1093 # Nicklock module: Let opers change a user's nick and then stop that
1094 # user from changing their nick again.
1095 #<module name="m_nicklock.so">
1097 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1098 # No ctcp module: Adds the channel mode +C to block CTCPs
1099 #<module name="m_noctcp.so">
1101 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1102 # Noinvite module: Gives channel mode +V
1103 #<module name="m_noinvite.so">
1105 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1106 # No kicks module: Adds the +Q channel mode
1107 #<module name="m_nokicks.so">
1109 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1110 # No nicks module: Adds the +N channel mode
1111 #<module name="m_nonicks.so">
1113 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1114 # No Notice module: adds the channel mode +T
1115 #<module name="m_nonotice.so">
1117 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1118 # Oper channels mode: Adds the +O channel mode
1119 #<module name="m_operchans.so">
1121 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1122 # Oper Join module: Forces opers to join a channel on oper-up
1123 #<module name="m_operjoin.so">
1125 #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1127 # If you are using the m_operjoin.so module, specify the channel here #
1129 #<operjoin channel="#channel">
1131 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1132 # Oper MOTD module: Provides support for seperate message of the day
1134 #<module name="m_opermotd.so">
1136 #-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1138 # If you are using the m_opermotd.so module, specify the motd here #
1140 #<opermotd file="/path/to/oper.motd">
1142 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1143 # Override module: Adds support for oper override
1144 #<module name="m_override.so">
1146 #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1148 # m_override.so is too complex it describe here, see the wiki: #
1149 # http://www.inspircd.org/wiki/Oper_Override_Module #
1151 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1152 # Oper levels module: Gives each oper a level and prevents
1153 # actions being taken against higher level opers
1154 # Specify the level as the 'level' parameter of the <type> tag
1155 #<module name="m_operlevels.so">
1157 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1158 # Oper MD5 module: Allows MD5 hashed oper passwords
1159 #<module name="m_opermd5.so">
1161 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1162 # Oper SHA256 module: Allows SHA256 hashed oper passwords
1163 # This module is in src/modules/extra
1164 #<module name="m_opersha256.so">
1166 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1167 # Oper modes module: Allows you to specify modes to add/remove on oper
1168 # Specify the modes as the 'modes' parameter of the <type> tag
1169 #<module name="m_opermodes.so">
1171 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1172 # PostgreSQL module: Allows other SQL modules to access PgSQL databases
1173 # through a unified API. You must copy the source for this module
1174 # from the directory src/modules/extra, plus the file m_sqlv2.h
1175 #<module name="m_pgsql.so">
1177 #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1179 # m_pgsql.so is more complex than described here, see the wiki for #
1180 # more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
1182 #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
1184 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1185 # Random Quote module: provides a random quote on connect.
1186 # NOTE: Some of these may mimic fatal errors and confuse users and
1187 # opers alike! - BEWARE!
1188 #<module name="m_randquote.so">
1190 #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
1192 # Optional - If you specify to use the m_randquote.so module, then #
1193 # specify below the path to the randquotes.conf file. #
1195 #<randquote file="/path/to/inspircd/randquotes.conf">
1197 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1198 # Redirect module: Adds channel redirection (mode +L)
1199 #<module name="m_redirect.so">
1201 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1202 # Remove module: Adds the /REMOVE command which is a peaceful
1203 # alternative to /KICK
1204 #<module name="m_remove.so">
1206 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1207 # Restricted channels module: Allows only opers to create channels
1208 #<module name="m_restrictchans.so">
1210 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1211 # Restrict message module: Allows users to only message opers
1212 #<module name="m_restrictmsg.so">
1214 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1215 # Provide /LIST throttling (to prevent flooding) and /LIST safety to
1216 # prevent excess flood when the list is large.
1217 #<module name="m_safelist.so">
1219 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1220 # SAJOIN module: Adds the /SAJOIN command
1221 #<module name="m_sajoin.so">
1223 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1224 # SAMODE module: Adds the oper /SAMODE command
1225 #<module name="m_samode.so">
1227 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1228 # SANICK module: Allows opers to change user's nicks
1229 #<module name="m_sanick.so">
1231 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1232 # SAPART module: Adds the oper /SAPART command
1233 #<module name="m_sapart.so">
1235 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1236 # SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
1237 #<module name="m_saquit.so">
1239 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-
1240 # Secure list module: Prevent /LIST in the first minute of connection,
1241 # crippling most spambots and trojan spreader bots.
1242 #<module name="m_securelist.so">
1244 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1245 # Set Idle module: Adds a command for opers to change their
1246 # idle time (mainly a toy)
1247 #<module name="m_setidle.so">
1249 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1250 # Services support module: Adds several usermodes such as +R and +M
1251 # this module implements the 'identified' state via user mode +r, which
1252 # is similar to the DALnet and dreamforge systems.
1253 #<module name="m_services.so">
1255 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1256 # Services support module: Adds several usermodes such as +R and +M
1257 # this module implements the 'identified' state via account names (AC)
1258 # and is similar in operation to the way asuka and ircu handle services.
1259 # it cannot be used at the same time as m_services, above.
1260 #<module name="m_services_account.so">
1262 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1263 # Sethost module: Adds the /SETHOST command
1264 #<module name="m_sethost.so">
1266 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1267 # Setident module: Adds the /SETIDENT command
1268 #<module name="m_setident.so">
1270 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1271 # SETNAME module: Adds the /SETNAME command
1272 #<module name="m_setname.so">
1274 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1275 # Show Whois module: Adds the +W usermode which allows opers
1276 # to see when they are whois'ed (can be annoying).
1277 #<module name="m_showwhois.so">
1279 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1280 # Spy module: Adds the commands SPYLIST and SPYNAMES that let opers
1281 # see who is in a +s channel, and list +s channels, show keys of keyed
1282 # channels the oper is not a member of etc. (standard 'abusive' features
1283 # of many other ircds, modulized here in InspIRCd).
1284 #<module name="m_spy.so">
1286 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1287 # SSL channel mode module: Adds support for SSL-only channels (+z).
1288 # does not do anything useful without a working SSL module (see below)
1289 #<module name="m_sslmodes.so">
1291 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1292 # Dummy ssl module: If you have other servers on your network which
1293 # have SSL, but your server does not have ssl enabled, you should load
1294 # this module, which will handle SSL metadata (e.g. the "Is using ssl"
1295 # field in the WHOIS information).
1296 #<module name="m_ssl_dummy.so">
1298 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1299 # GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
1300 # if enabled. You must copy the source for this module from the directory
1301 # src/modules/extra, or answer 'yes' in ./configure when asked if you
1302 # want to enable this, or it will not load.
1303 #<module name="m_ssl_gnutls.so">
1305 #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1307 # m_ssl_gnutls.so is too complex it describe here, see the wiki: #
1308 # http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
1310 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1311 # SSL Info module: Allows users to retrieve information about other
1312 # user's peer SSL certificates and keys. This can be used by client
1313 # scripts to validate users. For this to work, one of m_ssl_gnutls.so
1314 # or m_ssl_openssl.so must be loaded. You must symlink the source for
1315 # this module from the directory src/modules/extra.
1316 #<module name="m_sslinfo.so">
1318 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1319 # OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
1320 # if enabled. You must copy the source for this module from the directory
1321 # src/modules/extra, or answer 'yes' in ./configure when asked if you
1322 # want to enable this, or it will not load.
1323 #<module name="m_ssl_openssl.so">
1325 #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1327 # m_ssl_openssl.so is too complex it describe here, see the wiki: #
1328 # http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
1330 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1331 # SSL Cert Oper module: Allows opers to oper up using the key fingerprint
1332 # stored within their SSL certificate and key pair.
1333 # When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
1334 # be loaded. An extra value should be added to enabled opers, which
1335 # is in the following format: fingerprint="<hash>". For more information,
1336 # see the example in the oper blocks.
1337 #<module name="m_ssl_oper_cert.so">
1339 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1340 # Strip colour module: Adds the channel mode +S
1341 #<module name="m_stripcolor.so">
1343 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1344 # SILENCE module: Adds support for /SILENCE
1345 #<module name="m_silence.so">
1347 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1348 # SQL authentication module: Allows IRCd connections to be tied into
1349 # a database table (for example a forum). You must copy the source for
1350 # this module from the directory src/modules/extra
1351 #<module name="m_sqlauth.so">
1353 #-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1355 # m_sqlauth.so is too complex it describe here, see the wiki: #
1356 # http://www.inspircd.org/wiki/SQL_Authentication_Module #
1358 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1359 # SQL logging module: Allows you to log network-wide data for your
1360 # network in a fully normalized set of SQL tables. You must copy the
1361 # source for this module from the directory src/modules/extra
1362 #<module name="m_sqllog.so">
1364 #-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1366 # dbid - Database ID to use (see m_sql) #
1368 # See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
1372 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1373 # SQL oper module: Allows you to store oper credentials in an SQL table
1374 # You must copy the source for this module from the directory src/modules/extra
1375 #<module name="m_sqloper.so">
1377 #-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
1379 # dbid - Database ID to use (see m_sql) #
1381 # See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
1385 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1386 # SWHOIS module: Allows you to add arbitary lines to user WHOIS.
1387 #<module name="m_swhois.so">
1389 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1390 # Test command module: Does nothing significant. Read: pointless.
1391 #<module name="m_testcommand.so">
1393 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1394 # Timed bans module: Adds timed bans and the /TBAN command
1395 #<module name="m_timedbans.so">
1397 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1398 # Test line module: Adds the /TLINE command, used to test how many
1399 # users a /GLINE or /ZLINE etc would match.
1400 #<module name="m_tline.so">
1402 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1403 # Uninvite module: Adds the /UNINVITE command which lets users remove
1404 # pending invites from channels without waiting for the user to join.
1405 #<module name="m_uninvite.so">
1407 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1408 # Userip module: Adds the /USERIP command
1409 #<module name="m_userip.so">
1411 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1412 # Vhost module: Adds the VHOST command which allows for adding virtual
1413 # hosts which are accessible using a username and password in the config.
1414 #<module name="m_vhost.so">
1416 #-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
1418 # user - Username for the vhost. #
1420 # pass - Password for the vhost. #
1422 # host - Vhost to set. #
1424 #<vhost user="some_username" pass="some_password" host="some.host">
1426 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1427 # Watch module: Adds the WATCH command, which is used by clients to
1428 # maintain notify lists.
1429 #<module name="m_watch.so">
1431 #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
1433 # The ban tags define nick masks, host masks and ip ranges which are #
1434 # banned from your server. All details in these tags are local to #
1438 # badip lines ban an ip range (same as a zline) #
1440 # ipmask - The ip range to ban (wildcards possible) #
1441 # CIDR is supported in the IP mask. #
1442 # reason - Reason to display when disconnected #
1444 # badnick lines ban a nick mask (same as a qline) #
1446 # nick - Nick mask to ban (wildcards possible) #
1447 # reason - Reason to display on /NICK #
1449 # badhost lines ban a user@host mask (same as a kline) #
1451 # host - ident@hostname (wildcards possible) #
1452 # If you specify an IP, CIDR is supported. #
1453 # reason - Reason to display on disconnection #
1455 # exception lines define a hostmask that is excempt from [kzg]lines #
1457 # host - ident@hostname (wildcards possible) #
1458 # If you specify an IP, CIDR is supported. #
1459 # reason - Reason, shown only in /stats e #
1462 <badip ipmask="69.69.69.69" reason="No porn here thanks.">
1464 <badnick nick="ChanServ" reason="Reserved For Services">
1465 <badnick nick="NickServ" reason="Reserved For Services">
1466 <badnick nick="OperServ" reason="Reserved For Services">
1467 <badnick nick="MemoServ" reason="Reserved For Services">
1469 <badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots">
1470 <badhost host="*@localhost" reason="No irc from localhost!">
1471 <badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
1473 <exception host="*@ircop.host.com" reason="Opers hostname">
1475 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1477 # You should already know what to do here :) #
1479 <die value="No, i wasnt joking. You should probably edit your config *PROPERLY* and try again.">
1482 #########################################################################
1484 # - InspIRCd Development Team - #
1485 # http://www.inspircd.org #
1487 #########################################################################