1 ########################################################################
3 # --------------------------- #
4 # InspIRCd Configuration File #
5 # --------------------------- #
7 ##################################||####################################
9 ##################################||####################################
11 # This is an example of the config file for InspIRCd. #
12 # Change the options to suit your network #
14 # Last updated on : 06/06/2005 #
15 # Written by : CC (cc@backchat.co.za) #
16 # Updated by : katsklaw (katsklaw@gmail.com) #
17 ########################################################################
21 #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
23 # Here is where you enter the information about your server. #
25 # Syntax is as follows: #
26 # <server name="server.name" #
27 # description="Server Description" #
28 # network="MyNetwork"> #
31 <server name="penguin.omega.org.za"
32 description="Waddle World"
36 #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
38 # Describes the Server Administrator's real name, nick #
39 # and email address. #
41 # Syntax is as follows: #
42 # <admin name="real name" #
44 # email="email@address.com"> #
47 <admin name="Johnny English"
49 email="MI5@the.best.secret.agent">
52 #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
54 # Enter the port and address bindings here. #
56 # bind address - specifies which the address which ports bind #
57 # port - opens an unused port #
58 # type - can be 'clients' or 'servers'. The clients type is #
59 # a standard tcp based socket, the servers type is a #
60 # also a TCP based connection but of a different #
62 # default - if the port type is 'servers' then this can be #
63 # specified. If set to 'yes', it indicates that this #
64 # port is the default route for all /connect commands.#
65 # if you do not bind your default route to an #
66 # external ip, or all ip's, you may have connection #
69 # Leaving address empty binds to all available interfaces #
71 # Syntax is as follows: #
73 # <bind address="ip number" port="port" type="clients"> #
74 # <bind address="ip number" port="port" type="servers"> #
75 # <bind address="ip number" port="port" type="servers" default="yes"> #
78 <bind address="" port="6660" type="clients">
79 <bind address="" port="7000" type="servers" default="yes">
80 <bind address="" port="7001" type="servers">
83 #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
85 # You can configure the passwords here which you wish to use for #
86 # the die and restart commands. Only trusted ircops who will #
87 # need this ability should know the die and restart password. #
89 # Syntax is as follows: #
90 # <power diepass="die password" restartpass="restart password" #
91 # pause="secs before dying"> #
94 <power diepass="diepass" restartpass="restartpass" pause="2">
97 #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
99 # This optional tag allows you to include another config file #
100 # allowing you to keep your configuration tidy. The configuration #
101 # file you include will be treated as part of the configuration file #
102 # which includes it, in simple terms the inclusion is transparent. #
104 # All paths to config files are relative to the directory of the main #
105 # config file inspircd.conf, unless the filename starts with a forward#
106 # slash (/) in which case it is treated as an absolute path. #
108 # Syntax is as follows: #
109 # <include file="file.conf"> #
112 #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
114 # This is where you can configure which connections are allowed #
115 # and denied access onto your server. #
116 # The password is optional. #
117 # You may have as many of these as you require. #
118 # To allow/deny all connections use a * #
120 # Syntax is as follows: #
121 # <connect allow="ip or host"> #
122 # <connect allow="ip or host" password="blahblah"> #
123 # <connect allow="ip or host" password="blah" timeout="10"> #
124 # <connect allow="ip or host" timeout="blah" flood="5"> #
125 # <connect allow="ip or host" threshold="8" pingfreq="120"> #
126 # <connect allow="ip or host" sendq="99999" revcq="696969"> #
127 # <connect deny="ip or host"> #
129 # You may optionally include timeout="x" on any allow line, which #
130 # specifies the amount of time given before an unknown connection #
131 # is closed if USER/NICK/PASS are not given. This value is in secs #
133 # You may also optionally include a flood="x" line which indicates #
134 # the number of lines a user may place into their buffer at once #
135 # before they are disconnected for excess flood. The default is to #
136 # DISABLE this feature. A recommended value is 10. A counter is #
137 # maintained for each user which is reset every 'threshold' seconds #
138 # and specifying this threshold value with threshold="X" indicates #
139 # how often the counter is reset. For example, with flood="5" and #
140 # threshold="8", the user may not send more than 5 lines in 8 secs. #
142 # You may optionally specify the sendq size and ping frequency of #
143 # each connect:allow line using the pingfreq="X" and sendq="X" #
144 # settings as shown in the full example below. #
145 # The ping frequency is specified in seconds, and the sendq size #
146 # in bytes. It is recommended, although not enforced, that you #
147 # should never set your sendq size to less than 8k. Send Queues are #
148 # dynamically allocated and can grow as needed up to the maximum #
151 # The optional recvq value is the maximum size which users in this #
152 # group may grow their receive queue to. This is recommended to be #
153 # kept pretty low compared to the sendq, as users will always #
154 # recieve more than they send in normal circumstances. The default #
155 # if not specified is 4096. #
157 # IMPORTANT NOTE, CALL THE CONFUSION POLICE! #
158 # The sendq is the data waiting to be sent TO THE USER. #
159 # The recvq is the data being received FROM THE USER. #
160 # The names sendq and recvq are from the SERVER'S PERSPECTIVE not #
161 # that of the user... Just to clear up any confusion or complaints #
162 # that these are backwards :p #
165 <connect allow="196.12.*" password="secret">
166 <connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096">
168 <connect deny="69.254.*">
171 #-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
173 # Classes are a group of commands which are grouped together #
174 # and given a unique name. They used to define which commands #
175 # are available to certain types of Operators. #
177 # Syntax is as follow: #
178 # <class name="name" commands="oper commands"> #
181 <class name="Shutdown" commands="DIE RESTART REHASH">
182 <class name="ServerLink" commands="CONNECT SQUIT">
183 <class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE SHUN">
184 <class name="OperChat" commands="WALLOPS CHATOPS">
185 <class name="HostCloak" commands="SETHOST SETIDENT SETNAME">
188 #-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-#
190 # This is where you specify which types of operators you have on #
191 # your server, as well as the commands they are allowed to use. #
192 # This works alongside with the classes specified above. #
194 # type name - a name for the combined class types #
195 # classes - specified above, used for flexibility for the #
196 # server admin to decide on which operators get #
198 # host - hostmask operators will recieve on oper-up. #
201 # Syntax is as follows: #
202 # <type name="name" classes="class name" host="oper hostmask"> #
205 <type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za">
206 <type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za">
207 <type name="LocalOp" classes="OperChat BanControl HostCloak" host="local.omega.org.za">
208 <type name="Helper" classes="HostCloak" host="helper.omega.org.za">
211 #-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
213 # Opers are defined here. This is a very important section. #
214 # Remember to only make operators out of truthworthy people. #
216 # name - oper name, best to use lower-case #
217 # password - password to oper-up, #
218 # encryption not supported by inspircd. However, there #
219 # are modules that allow for oper password encryption. #
221 # host - host of client allowed to oper-up, more hostmasks #
222 # seperated by spaces, wildcards accepted #
223 # type - specified above, defines the kind of operator #
225 # Syntax is as follows: #
226 # <oper name="login" #
228 # host="hostmask@of.oper" #
229 # type="oper type"> #
232 <oper name="katsklaw"
238 #-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-#
240 # Defines which servers can link to this one, and which servers this #
241 # server may create outbound links to. #
243 # name - The name is the canocial name of the server, it does #
244 # not have to resolve - but it is expected to be sent #
245 # in the remote servers connection info. #
246 # ipaddr - Valid host or ip address for remote server. * #
247 # port - Valid listening UDP port for remote server. #
248 # sendpass - Password to send to create an outbound connection to #
250 # recvpass - Password to receive to accept an inbound connection #
251 # from this server. #
252 # autoconnect - Sets the server to autoconnect. Where x is the number #
253 # (optional) of seconds between attempts. 300 = 5 minutes #
255 # to u:line a server (give it extra privilages required for running #
256 # services, Q, etc) you must include the <uline server> tag as shown #
257 # in the example below. You can have as many of these as you like. #
259 # WARNING: Unlike other ircds, u:lining a server allows ALL users on #
260 # that server to operoverride modes. This should only be used for #
261 # services and protected oper servers! #
263 # IMPORTANT NOTE: When specifying the ip address and/or host, the #
264 # server software will prioritize RESOLVED hostnames above ip #
265 # addresses, so for example if your target server resolves to a.b.com #
266 # you MUST put a.b.com into your link block, and NOT the IP address #
267 # of a.b.com. The system uses reverse resolution. #
270 <link name="hub.penguin.org"
271 ipaddr="penguin.box.com"
274 sendpass="outgoing!password"
275 recvpass="incoming!password">
277 <link name="services.antarctic.com"
281 recvpass="polarbears">
283 <uline server="services.antarctic.com">
286 #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
288 # These options let you define the path to your motd and rules #
292 <files motd="/home/cc/inspircd/conf/inspire.motd"
293 rules="/home/cc/inspircd/conf/inspire.rules">
295 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
297 # Define your DNS server address here. InspIRCd has its own resolver #
298 # and you must define this otherwise nobody's host will resolve. The #
299 # timeout value is in seconds. #
302 <dns server="127.0.0.1" timeout="5">
304 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
306 # Define the path to the PID file here. The PID file can be used to #
307 # rehash the ircd from the shell or to terminate the ircd from the #
308 # shell using shell scripts, perl scripts etc, and to monitor the #
309 # ircd's state via cron jobs. #
312 <pid file="/path/to/inspircd.pid">
314 #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
316 # Use these tags to customise the ban limits on a per channel basis. #
317 # the tags are read from top to bottom, and any tag found which #
318 # matches the channels name applies the banlimit to that channel. #
319 # It is advisable to put an entry with the channel as '*' at the #
320 # bottom of the list. If none are specified or no maxbans tag is #
321 # matched, the banlist size defaults to 64 entries. #
324 <banlist chan="#morons" limit="128">
325 <banlist chan="*" limit="69">
327 #-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
329 # This tag is optional, and specifies one or more commands which are #
330 # not available to non-operators. For example you may wish to disable #
331 # NICK and prevent non-opers from changing their nicknames. #
332 # Note that any disabled commands take effect only after the user has #
333 # 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
334 # so for example disabling NICK will not cripple your network. #
336 # <disabled commands="TOPIC MODE"> #
340 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
342 # Just remove this... Its here to make you read ALL of the config #
345 <die value="You should probably edit your config *PROPERLY* and try again.">
349 #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
351 # Settings to define which features are useable on your server. #
353 # prefixquit - a prefix for a client's quit message #
354 # loglevel - specifies what detail of messages to log in the #
355 # log file. You may select from debug, verbose, #
356 # default, sparse and none. #
357 # allowhalfop - allows the +h channel mode #
358 # noservices - If noservices is true, yes, or 1, then the first #
359 # user into a channel gets founder status. This is #
360 # only useful on networks running the m_chanprotect #
361 # module without services. #
362 # netbuffersize - size of the buffer used to receive data from #
363 # clients. The ircd may only read() this amount #
364 # of text in one go at any time. (OPTIONAL) #
365 # maxwho - The maximum number of results returned by a /WHO #
366 # query. This is to prevent /WHO being used as a #
367 # spam vector or means of flooding an ircd. The #
368 # default is 128, it is not recommended to raise it #
369 # above 1024. Values up to 65535 are permitted. #
370 # somaxconn - The maximum number of sockets that may be waiting #
371 # in the accept queue. This usually allows the ircd #
372 # to soak up more connections in a shorter space of #
373 # time when increased but please be aware there is a #
374 # system defined maximum value to this, the same way #
375 # there is a system defined maximum number of file #
376 # descriptors. Some systems may only allow this to #
377 # be up to 5 (ugh) while others such as FreeBSD will #
378 # default to a much nicer 128. #
379 # moduledir - This optional value indicates a runtime change of #
380 # the location where modules are to be found. This #
381 # does not add a supplementary directory. There can #
382 # only be one module path. #
383 # softlimit - This optional feature allows a defined softlimit. #
384 # if defined sets a soft maxconnections value, has #
385 # to be less than the ./configure maxclients #
388 <options prefixquit="Quit: "
390 netbuffersize="10240"
399 #-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
401 # These tags define which modules will be loaded on startup by your #
402 # server. Add modules without any paths. When you make your ircd #
403 # using the 'make' command, all compiled modules will be moved into #
404 # the folder you specified when you ran ./configure. The module tag #
405 # automatically looks for modules in this location. #
406 # If you attempt to load a module outside of this location, either #
407 # in the config, or via /LOADMODULE, you will receive an error. #
409 # By default, ALL modules are commented out. You must uncomment them #
410 # or add lines to your config to load modules. Please refer to #
411 # http://www.inspircd.org/wiki/Modules_List for a list of modules and#
412 # each modules link for any additional conf tags they require. #
414 # WINDOWS USERS PLEASE NOTE: You can still load these modules! They #
415 # are incorporated into the executable and can be loaded and removed #
416 # similarly to if they were in a ramdisk. #
418 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
419 # Foobar module - does nothing
420 #<module name="m_foobar.so">
422 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
423 # Chanprotect module: gives +q and +a channel modes
424 #<module name="m_chanprotect.so">
426 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
427 # Globops module: gives /GLOBOPS and usermode +g
428 #<module name="m_globops.so">
430 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
431 # Noinvite module: Gives channel mode +V
432 #<module name="m_noinvite.so">
434 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
435 # Oper MD5 module: Allows MD5 hashed oper passwords
436 #<module name="m_opermd5.so">
438 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
439 # Restricted channels module: Allows only opers to create channels
440 #<module name="m_restrictchans.so">
442 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
443 # Deny Channels: Deny Channels from being used by users
444 #<module name="m_denychans.so">
446 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
447 # Services support module: Adds several usermodes such as +R and +M
448 #<module name="m_services.so">
450 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
451 # Userip module: Adds the /USERIP command
452 #<module name="m_userip.so">
454 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
455 # Alias module: Allows you to define server-side command aliases
456 #<module name="m_alias.so">
458 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
459 # CHGHOST module: Adds the /CHGHOST command
460 #<module name="m_chghost.so">
462 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
463 # HELPOP module: Provides the /HELPOP command
464 #<module name="m_helpop.so">
466 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
467 # No kicks module: Adds the +Q channel mode
468 #<module name="m_nokicks.so">
470 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
471 # Oper MOTD module: Provides support for seperate message of the day
473 #<module name="m_opermotd.so">
475 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
476 # Restrict message module: Allows users to only message opers
477 #<module name="m_restrictmsg.so">
479 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
480 # Sethost module: Adds the /SETHOST command
481 #<module name="m_sethost.so">
483 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
484 # Antibottler module: Labels bottler leech bots
485 #<module name="m_antibottler.so">
487 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
488 # Watch module: Adds the WATCH command, which is used by clients to
489 # maintain notify lists.
490 #<module name="m_watch.so">
492 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
493 # Cloaking module: Adds usermode +x and cloaking support
494 #<module name="m_cloaking.so">
496 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
497 # Hostchange module: Allows a different style of cloaking
498 #<module name="m_hostchange.so">
500 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
501 # No nicks module: Adds the +N channel mode
502 #<module name="m_nonicks.so">
504 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
505 # Override module: Adds support for oper override
506 #<module name="m_override.so">
508 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
509 # SAJOIN module: Adds the /SAJOIN command
510 #<module name="m_sajoin.so">
512 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
513 # Set Idle module: Adds a command for opers to change their
514 # idle time (mainly a toy)
515 #<module name="m_setidle.so">
517 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
518 # Block colour module: Adds the +c channel mode
519 #<module name="m_blockcolor.so">
521 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
522 # Conn-Lusers: Shows the LUSERS output on connect
523 #<module name="m_conn_lusers.so">
525 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
526 # Ident: Provides RFC 1413 ident lookup support
527 #<module name="m_ident.so">
529 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
530 # No Notice module: adds the channel mode +T
531 #<module name="m_nonotice.so">
533 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
534 # Parking module: Adds parking support and /PARK and /UNPARK
535 #<module name="m_park.so">
537 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
538 # SAMODE module: Adds the oper /SAMODE command
539 #<module name="m_samode.so">
541 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
542 # SETNAME module: Adds the /SETNAME command
543 #<module name="m_setname.so">
545 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
546 # Botmode module: Adds the user mode +B
547 #<module name="m_botmode.so">
549 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
550 # Filter module: Provides glob-based message filtering
551 #<module name="m_filter.so">
553 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
554 # Knock module: adds the /KNOCK command and +K channel mode
555 #<module name="m_knock.so">
557 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
558 # Oper channels mode: Adds the +O channel mode
559 #<module name="m_operchans.so">
561 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
562 # Random Quote module: provides a random quote on connect
563 #<module name="m_randquote.so">
565 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
566 # SANICK module: Allows opers to change user's nicks
567 #<module name="m_sanick.so">
569 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
570 # Show Whois module: Adds the +W usermode which allows opers
571 # to see when they are whois'ed
572 #<module name="m_showwhois.so">
574 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
575 # Strip colour module: Adds the channel mode +S
576 #<module name="m_stripcolor.so">
578 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
579 # Censor module: Adds the channel mode +G
580 #<module name="m_censor.so">
582 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
583 # Nick locking module: Adds the oper-only /NICKLOCK command
584 #<module name="m_nicklock.so">
586 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
587 # Oper Join module: Forces opers to join a channel on oper-up
588 #<module name="m_operjoin.so">
590 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
591 # Redirect module: Adds channel redirection (mode +L)
592 #<module name="m_redirect.so">
594 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
595 # SAPART module: Adds the oper /SAPART command
596 #<module name="m_sapart.so">
598 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
599 # SILENCE module: Adds support for /SILENCE
600 #<module name="m_silence.so">
602 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
603 # Test command module: Does nothing significant
604 #<module name="m_testcommand.so">
606 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
607 # Channel filter module: Allows channel-op defined message
608 # filtering using simple string matches (channel mode +g)
609 #<module name="m_chanfilter.so">
611 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
612 # No ctcp module: Adds the channel mode +C to block CTCPs
613 #<module name="m_noctcp.so">
615 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
616 # Oper levels module: Gives each oper a level and prevents
617 # actions being taken against higher level opers
618 #<module name="m_operlevels.so">
620 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
621 # Remove module: Adds the /REMOVE command which is a peaceful
622 # alternative to /KICK
623 #<module name="m_remove.so">
625 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
626 # SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
627 #<module name="m_saquit.so">
629 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
630 # Timed bans module: Adds timed bans and the /TBAN command
631 #<module name="m_timedbans.so">
633 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
634 # Oper modes module: Allows you to specify modes to add/remove on oper
635 #<module name="m_opermodes.so">
638 #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
640 # Optional - If you specify to use the m_filter.so module, then #
641 # specfiy below the path to the filter.conf file. #
643 #<filter file="/path/to/inspircd/filter.conf">
646 #-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
648 # Optional - If you specify to use the m_helpop.so module, then #
649 # specify below the path to the helpop.conf file. #
651 <die value="If you used the helpop include above then do *NOT* use this tag.">
652 #<helpop file="/path/to/inspircd/helpop.conf">
655 #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
657 # Optional - If you specify to use the m_randquotes.so module, then #
658 # specify below the path to the randquotes.conf file. #
660 #<randquote file="/path/to/inspircd/randquotes.conf">
662 #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
664 # The ban tags define nick masks, host masks and ip ranges which are #
665 # banned from your server. All details in these tags are local to #
669 # badip lines ban an ip range (same as a zline) #
671 # ipmask - The ip range to ban (wildcards possible) #
672 # reason - Reason to display when disconnected #
674 # badnick lines ban a nick mask (same as a qline) #
676 # nick - Nick mask to ban (wildcards possible) #
677 # reason - Reason to display on /NICK #
679 # badhost lines ban a user@host mask (same as a kline) #
681 # host - ident@hostname (wildcards possible) #
682 # reason - Reason to display on disconnection #
684 # exception lines define a hostmask that is excempt from [kzg]lines #
686 # host - ident@hostname (wildcards possible) #
687 # reason - Reason, shown only in /stats e #
690 <badip ipmask="69.69.69.69" reason="No porn here thanks.">
692 <badnick nick="ChanServ" reason="Reserved For Services">
693 <badnick nick="NickServ" reason="Reserved For Services">
694 <badnick nick="OperServ" reason="Reserved For Services">
695 <badnick nick="MemoServ" reason="Reserved For Services">
697 <badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots">
698 <badhost host="*@localhost" reason="No irc from localhost!">
700 <exception host="*@ircop.host.com" reason="Opers hostname">
702 #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
704 # If you have the m_alias.so module loaded, you may also define #
705 # aliases as shown below. They are commonly used to provide shortcut #
706 # commands to services, however they are not limited to jsut this use.#
707 # An alias tag requires the following values to be defined in it: #
709 # text - The text to detect at the start of the line, #
710 # must be at the start of the line to trigger the #
711 # alias. May contain spaces, but case insensitive. #
712 # replace - The text to replace 'text' with. Usually this #
713 # will be "PRIVMSG ServiceName :" or similar. #
714 # requires - If you provide a value for 'requires' this means #
715 # the given nickname MUST be online for the alias #
716 # to successfully trigger. If they are not, then #
717 # the user receives a 'no such nick' 401 numeric. #
718 # uline - Defining this value with 'yes', 'true' or '1' #
719 # will ensure that the user given in 'requires' #
720 # must also be on a u-lined server, as well as #
721 # actually being on the network. If the user is #
722 # online, but not on a u-lined server, then an #
723 # oper-alert is sent out as this is possibly signs #
724 # of a user trying to impersonate a service. #
727 <alias text="NICKSERV" replace="PRIVMSG NickServ :" requires="NickServ" uline="yes">
728 <alias text="CHANSERV" replace="PRIVMSG ChanServ :" requires="ChanServ" uline="yes">
729 <alias text="NS" replace="PRIVMSG NickServ :" requires="NickServ" uline="yes">
730 <alias text="CS" replace="PRIVMSG ChanServ :" requires="ChanServ" uline="yes">
732 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
734 # You should already know what to do here :) #
736 <die value="You should probably edit your config *PROPERLY* and try again.">
739 #########################################################################
741 # -InspIRCd Development and Coding Team- #
744 #########################################################################