1 ########################################################################
3 # ___ ___ ____ ____ _ #
4 # |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
5 # | || '_ \/ __| '_ \| || |_) | | / _` | #
6 # | || | | \__ \ |_) | || _ <| |__| (_| | #
7 # |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
10 # / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
11 # | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
12 # | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
13 # \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
16 ##################################||####################################
18 ##################################||####################################
20 # This is an example of the config file for InspIRCd. #
21 # Change the options to suit your network #
24 # ____ _ _____ _ _ ____ _ _ _ #
25 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
26 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
27 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
28 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
30 # Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
31 # lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
32 # if you've configured InspIRCd before, these probably indicate #
33 # something new or different to this version and you SHOULD READ IT. #
35 ########################################################################
37 # Unalphabeticalise the modules list at your own risk #
39 ########################################################################
41 #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
43 # This optional tag allows you to include another config file #
44 # allowing you to keep your configuration tidy. The configuration #
45 # file you include will be treated as part of the configuration file #
46 # which includes it, in simple terms the inclusion is transparent. #
48 # All paths to config files are relative to the directory that the #
51 # You may also include an executable file, in which case if you do so #
52 # the output of the executable on the standard output will be added #
53 # to your config at the point of the include tag. #
55 # Syntax is as follows: #
56 #<include file="file.conf"> #
57 #<include executable="/path/to/executable parameters"> #
59 # Executable Include Example: #
60 #<include executable="/usr/bin/wget -q -O - http://mynet.net/inspircd.conf">
64 #-#-#-#-#-#-#-#-#-#-#-# VARIABLE DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
66 # You can define variables that will be substituted later in the #
67 # configuration file. This can be useful to allow settings to be #
68 # easily changed, or to parameterize a remote includes. #
70 # Variables may be redefined and may reference other variables. #
71 # Value expansion happens at the time the tag is read. #
73 # Using variable definitions REQUIRES that the config format be #
74 # changed to "xml" from the default "compat" that uses escape #
75 # sequences such as "\"" and "\n", and does not support <define> #
77 <define name="bindip" value="1.2.2.3">
78 <define name="localips" value="&bindip;/24">
80 #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
82 # Here is where you enter the information about your server. #
86 # name: Hostname of your server. Does not need to resolve, but
87 # does need to be correct syntax (something.somethingelse.tld).
88 name="penguin.omega.org.za"
90 # description: Server description. Spaces are allowed.
91 description="Waddle World"
93 # id: The SID to use for this server. This should not be uncommented
94 # unless there is a SID conflict. This must be three characters long.
95 # The first character must be a digit [0-9], the remaining two chars
96 # may be letters [A-Z] or digits.
99 # network: Network name given on connect to clients.
100 # Should be the same on all servers on the network and
101 # not contain spaces.
105 #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
107 # Describes the Server Administrator's real name (optionally), #
108 # nick, and email address. #
113 name="Johnny English"
115 # nick: Nickname (preferably what you use on the network)
118 # email: email address. Does not have to be valid
119 # but should be for the users to be able to contact you.
120 email="MI5@the.best.secret.agent">
123 #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
125 # Enter the port and address bindings here. #
128 # ____ _ _____ _ _ ____ _ _ _ #
129 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
130 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
131 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
132 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
134 # If you want to link servers to InspIRCd you must load the #
135 # m_spanningtree.so module! Please see the modules list below for #
136 # information on how to load this module! If you do not load this #
137 # module, server ports will NOT be bound! #
139 # PLEASE NOTE: If you have build InspIRCd with IPv6 support, you MUST #
140 # specify a bind address if you want the IRCd to bind to a IPv4 IP. #
143 # address: IP address to bind to if the box that you are hosting
144 # on has more than one IP, else the ircd will try to bind to all
145 # IP's on the box if this is not defined.
148 # port: Port for users or servers to be able to connect to.
149 # you can select multiple ports by separating them
150 # with a - character like the example below.
153 # type: Type of bind block this is. It can either be clients or
154 # servers. Whichever you select will be the only type able to connect
155 # to this bind section.
158 # ssl: If you want this bind section to use SSL, define either
159 # gnutls or openssl here. The appropriate SSL modules must be loaded
160 # for ssl to work. If you do not want this bind section to support ssl,
161 # just remove or comment out this option.
165 <bind address="" port="6660-6669" type="clients">
167 # When linking servers, the openssl and gnutls implementations are completely
168 # link-compatible and can be used alongside each other
169 # on each end of the link without any significant issues.
170 # Supported ssl types are: "openssl" and "gnutls".
171 # You must load, m_ssl_openssl for openssl
172 # or m_ssl_gnutls for gnutls.
174 <bind address="" port="7000,7001" type="servers">
175 <bind address="1.2.3.4" port="7005" type="servers" ssl="openssl">
178 #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
180 # You can configure the passwords here which you wish to use for #
181 # the die and restart commands. Only trusted IRCop's who will #
182 # need this ability should know the die and restart password. #
186 # hash: what hash these passwords are hashed with. requires the module
187 # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
188 # loaded and the password hashing module (m_password_hash.so)
189 # loaded. Options here are: "md5", "sha256" and "ripemd160".
190 # Optional, but recommended. Create hashed password with:
191 # /mkpasswd <hash> <password>
194 # diepass: Password for opers to use if they need to shutdown (die)
198 # restartpass: Password for opers to use if they need to restart
203 #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
205 # This is where you can configure which connections are allowed #
206 # and denied access onto your server. The password is optional. #
207 # You may have as many of these as you require. To allow/deny all #
208 # connections, use a '*' or 0.0.0.0/0. #
210 # -- It is important to note that connect tags are read from the -- #
211 # TOP DOWN. This means that you should have more specific deny #
212 # and allow tags at the top, progressively more general, followed #
213 # by a <connect allow="*" (should you wish to have one). #
215 # Connect blocks are searched twice for each user - once when the TCP #
216 # connection is accepted, and once when the user completes their #
217 # registration. Most of the information (hostname, ident response, #
218 # password, SSL when using STARTTLS, etc) is only available during #
219 # the second search, so if you are trying to make a closed server, #
220 # you will probably need a connect block just for user registration. #
221 # This can be done by using <connect registered="no"> #
224 # deny: Will not let people connect if they have specified host/IP.
227 # connect:reason is the message that users will see if they match a deny block
228 <connect deny="3ffe::0/32" reason="The 6bone address space is deprecated">
231 # name: Name to use for this connect block. Mainly used for
232 # connect class inheriting.
235 # parent: This setting is to specify if this connect class
236 # inherits settings from any other. Put the other class's name
237 # in here to use its settings as a template - for example, if
238 # you only want to adjust sendq and a password
241 # allow: What IP addresses/hosts to allow for this block.
244 # hash: what hash this password is hashed with. requires the module
245 # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
246 # loaded and the password hashing module (m_password_hash.so)
247 # loaded. Options here are: "md5", "sha256" and "ripemd160".
248 # Optional, but recommended. Create hashed password with:
249 # /mkpasswd <hash> <password>
252 # password: Password to use for this block/user(s)
255 # maxchans: Maximum number of channels a user in this class
256 # be in at one time. This overrides every other maxchans setting.
259 # timeout: How long (in seconds) the server will wait before
260 # disconnecting a user if they do not do anything on connect.
261 # (Note, this is a client-side thing, if the client does not
262 # send /nick, /user or /pass)
265 # localmax: Maximum local connections per IP (or CIDR mask, see below).
268 # globalmax: Maximum global (network-wide) connections per IP (or CIDR mask, see below).
271 # maxconnwarn: Enable warnings when localmax or globalmax is hit (defaults to on)
274 # useident: Defines if users in this class MUST respond to a ident query or not.
277 # limit: How many users are allowed in this class
280 # modes: Usermodes that are set on users in this block on connect.
281 # Enabling this option requires that the m_conn_umodes module be loaded.
282 # This entry is highly recommended to use for/with IP Cloaking/masking.
283 # For the example to work, this also requires that the m_cloaking
284 # module be loaded as well.
287 # requireident, requiressl, requireaccount: require that users of this
288 # block have a valid ident response, use SSL, or have authenticated.
289 # Requires m_ident, m_sslinfo, or m_services_account respectively.
291 # NOTE: For requireaccount, you must complete the signon prior to full
292 # connection. Currently, this is only possible by using SASL
293 # authentication; passforward and PRIVMSG NickServ happen after
294 # your final connect block has been found.
296 # Alternate MOTD file for this connect class. The contents of this file are
297 # specified using <files secretmotd="filename"> or <execfiles ...>
300 # port: What port this user is allowed to connect on. (optional)
301 # The port MUST be set to listen in the bind blocks above.
305 # name: Name to use for this connect block. Mainly used for
306 # connect class inheriting.
309 # allow: What IP addresses/hosts to allow for this block.
312 # maxchans: Maximum number of channels a user in this class
313 # be in at one time. This overrides every other maxchans setting.
316 # timeout: How long (in seconds) the server will wait before
317 # disconnecting a user if they do not do anything on connect.
318 # (Note, this is a client-side thing, if the client does not
319 # send /nick, /user or /pass)
322 # pingfreq: How often (in seconds) the server tries to ping connecting clients.
325 # hardsendq: maximum amount of data allowed in a client's send queue
326 # before they are dropped. Keep this value higher than the length of
327 # your network's /LIST or /WHO output, or you will have lots of
328 # disconnects from sendq overruns!
331 # softsendq: amount of data in a client's send queue before the server
332 # begins delaying their commands in order to allow the sendq to drain
335 # recvq: amount of data allowed in a client's queue before they are dropped.
338 # threshold: This specifies the amount of command penalty a user is allowed to have
339 # before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
340 # ones such as /OPER have penalties up to 10.
342 # If you are not using fakelag, this should be at least 20 to avoid excess flood kills
343 # from processing some commands.
346 # commandrate: This specifies the maximum rate that commands can be processed.
347 # If commands are sent more rapidly, the user's penalty will increase and they will
348 # either be fakelagged or killed when they reach the threshold
350 # Units are millicommands per second, so 1000 means one line per second.
353 # fakelag: Use fakelag instead of killing users for excessive flood
355 # Fake lag stops command processing for a user when a flood is detected rather than
356 # immediately killing them; their commands are held in the recvq and processed later
357 # as the user's command penalty drops. Note that if this is enabled, flooders will
358 # quit with "RecvQ exceeded" rather than "Excess Flood".
361 # localmax: Maximum local connections per IP.
364 # globalmax: Maximum global (network-wide) connections per IP.
367 # useident: Defines if users in this class must respond to a ident query or not.
370 # limit: How many users are allowed in this class
373 # modes: Usermodes that are set on users in this block on connect.
374 # Enabling this option requires that the m_conn_umodes module be loaded.
375 # This entry is highly recommended to use for/with IP Cloaking/masking.
376 # For the example to work, this also requires that the m_cloaking
377 # module be loaded as well.
381 #-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
383 # CIDR configuration allows detection of clones and applying of #
384 # throttle limits across a CIDR range. (A CIDR range is a group of #
385 # IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
386 # represented as 192.168.1.0/24). This means that abuse across an ISP #
387 # is detected and curtailed much easier. Here is a good chart that #
388 # shows how many IPs the different CIDRs correspond to: #
389 # http://en.wikipedia.org/wiki/CIDR#Prefix_aggregation #
393 # ipv4clone: specifies how many bits of an IP address should be
394 # looked at for clones. The default only looks for clones on a
395 # single IP address of a user. You do not want to set this
396 # extremely low. (Values are 0-32).
399 # ipv6clone: specifies how many bits of an IP address should be
400 # looked at for clones. The default only looks for clones on a
401 # single IP address of a user. You do not want to set this
402 # extremely low. (Values are 0-128).
405 # This file has all the information about oper classes, types and o:lines.
406 # You *MUST* edit it.
407 <include file="conf/opers.conf.example">
409 # This file has all the information about server links and ulined servers.
410 # You *MUST* edit it if you intend to link servers.
411 <include file="conf/links.conf.example">
413 #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
416 # Files block - contains files whose contents are used by the ircd
418 # motd - displayed on connect and when a user executes /MOTD
419 # rules - displayed when the user executes /RULES
420 # Modules can also define their own files
421 <files motd="conf/inspircd.motd.example" rules="conf/inspircd.rules.example">
423 # Example of an executable file include. Note this will be read on rehash,
424 # not when the command is run.
425 #<execfiles rules="wget -O - http://www.example.com/rules.txt">
427 #-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
431 # users: Maximum number of channels a user can be in at once.
434 # opers: Maximum number of channels a oper can be in at once.
437 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
438 # If these values are not defined, InspIRCd uses the default DNS resolver
442 # server: DNS server to use to attempt to resolve IP's to hostnames.
443 # in most cases, you won't need to change this, as inspircd will
444 # automatically detect the nameserver depending on /etc/resolv.conf
445 # (or, on windows, your set nameservers in the registry.)
446 # Note that this must be an IP address and not a hostname, because
447 # there is no resolver to resolve the name until this is defined!
451 # timeout: seconds to wait to try to resolve DNS/hostname.
454 # An example of using an IPv6 nameserver
455 #<dns server="::1" timeout="5">
457 #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
459 # Define the path to the PID file here. The PID file can be used to #
460 # rehash the ircd from the shell or to terminate the ircd from the #
461 # shell using shell scripts, perl scripts, etc... and to monitor the #
462 # ircd's state via cron jobs. If this is a relative path, it will be #
463 # relative to the configuration directory, and if it is not defined, #
464 # the default of 'inspircd.pid' is used. #
467 #<pid file="/path/to/inspircd.pid">
469 #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
471 # Use these tags to customise the ban limits on a per channel basis. #
472 # The tags are read from top to bottom, and any tag found which #
473 # matches the channels name applies the banlimit to that channel. #
474 # It is advisable to put an entry with the channel as '*' at the #
475 # bottom of the list. If none are specified or no maxbans tag is #
476 # matched, the banlist size defaults to 64 entries. #
479 <banlist chan="#morons" limit="128">
480 <banlist chan="*" limit="69">
482 #-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
484 # This tag is optional, and specifies one or more features which are #
485 # not available to non-operators. #
487 # For example you may wish to disable NICK and prevent non-opers from #
488 # changing their nicknames. #
489 # Note that any disabled commands take effect only after the user has #
490 # 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
491 # so for example disabling NICK will not cripple your network. #
493 # You can also define if you want to disable any channelmodes #
494 # or usermodes from your users. #
496 # `fakenonexistant' will make the ircd pretend that nonexistant #
497 # commands simply don't exist to non-opers ("no such command"). #
499 #<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">
502 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
504 # Just remove this... Its here to make you read ALL of the config #
507 <die value="You should probably edit your config *PROPERLY* and try again.">
511 #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
513 # Settings to define which features are usable on your server. #
517 # prefixquit: What (if anything) a users' quit message
518 # should be prefixed with.
521 # suffixquit: What (if anything) a users' quit message
522 # should be suffixed with.
525 # prefixpart: What (if anything) a users' part message
526 # should be prefixed with.
528 # NOTE: Use "\"" instead of """ if not using <config format="xml">
530 # suffixpart: What (if anything) a users' part message
531 # should be suffixed with.
534 # fixedquit: Set all users' quit messages to this value.
537 # fixedpart: Set all users' part messages in all channels
541 # syntaxhints: If enabled, if a user fails to send the correct parameters
542 # for a command, the ircd will give back some help text of what
543 # the correct parameters are.
546 # cyclehosts: If enabled, when a user gets a host set, it will cycle
547 # them in all their channels. If not, it will simply change their host
548 # without cycling them.
551 # cyclehostsfromuser: If enabled, the source of the mode change for
552 # cyclehosts will be the user who cycled. This can look nicer, but
553 # triggers anti-takeover mechanisms of some obsolete bots.
554 cyclehostsfromuser="no"
556 # ircumsgprefix: Use undernet-style message prefixing for NOTICE and
557 # PRIVMSG. If enabled, it will add users' prefix to the line, if not,
558 # it will just message the user normally.
561 # announcets: If set to yes, when the TimeStamp on a channel changes, all users
562 # in channel will be sent a NOTICE about it.
565 # allowmismatched: Setting this option to yes will allow servers to link even
566 # if they don't have the same VF_OPTCOMMON modules loaded. Setting this to
567 # yes may introduce some desyncs and weirdness.
570 # defaultbind: Sets the default for <bind> tags without an address. Choices are
571 # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
572 # falling back to IPv4 otherwise.
575 # hostintopic: If enabled, channels will show the host of the topicsetter
576 # in the topic. If set to no, it will only show the nick of the topicsetter.
579 # pingwarning: If a server does not respond to a ping within x seconds,
580 # it will send a notice to opers with snomask +l informing that the server
581 # is about to ping timeout.
584 # serverpingfreq: How often pings are sent between servers (in seconds).
587 # defaultmodes: What modes are set on a empty channel when a user
588 # joins it and it is unregistered. This is similar to Asuka's
592 # moronbanner: This is the text that is sent to a user when they are
593 # banned from the server.
594 moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
596 # exemptchanops: exemptions for channel access restrictions based on prefix.
597 exemptchanops="nonick:v flood:o"
599 # invitebypassmodes: This allows /invite to bypass other channel modes.
600 # (Such as +k, +j, +l, etc)
601 invitebypassmodes="yes"
603 # nosnoticestack: This prevents snotices from 'stacking' and giving you
604 # the message saying '(last message repeated X times)'. Defaults to no.
608 #-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
612 # netbuffersize: Size of the buffer used to recieve data from clients.
613 # The ircd may only read this amount of text in 1 go at any time.
614 netbuffersize="10240"
616 # maxwho: Maximum number of results to show in a /who query.
619 # somaxconn: The maximum number of connections that may be waiting
620 # in the accept queue. This is *NOT* the total maximum number of
621 # connections per server. Some systems may only allow this to be up
622 # to 5, while others (such as linux and *BSD) default to 128.
625 # softlimit: This optional feature allows a defined softlimit for
626 # connections. If defined, it sets a soft max connections value.
627 # must be lower than ./configure maxclients.
630 # quietbursts: When syncing or splitting from a network, a server
631 # can generate a lot of connect and quit messages to opers with
632 # +C and +Q snomasks. Setting this to yes squelches those messages,
633 # which makes it easier for opers, but degrades the functionality of
634 # bots like BOPM during netsplits.
637 # nouserdns: If enabled, no DNS lookups will be performed on
638 # connecting users. This can save a lot of resources on very busy servers.
641 #-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
646 # announceinvites: If this option is set, then invites are announced
647 # to the channel when a user invites another user. If you consider
648 # this to be unnecessary noise, set this to 'none'.
649 # To announce to all ops, set this to 'ops' and to announce to all users,
650 # set the value to 'all'. The value 'dynamic' will make the messages
651 # go to every user who has power of INVITE on the channel. This
652 # is the recommended setting.
653 announceinvites="dynamic"
655 # hidemodes: If enabled, then the listmodes given will be hidden
656 # from users below halfop. This is not recommended to be set on +b
657 # as it may break some functionality in popular clients such as mIRC.
660 # hideulines: If this value is set to yes, U-lined servers will
661 # be hidden from non-opers in /links and /map.
664 # flatlinks: If this value is set to yes, /map and /links will
665 # be flattened when shown to non-opers.
668 # hidewhois: When defined, the given text will be used in place
669 # of the server a user is on when whoised by a non-oper. Most
670 # networks will want to set this to something like "*.netname.net"
671 # to conceal the actual server a user is on.
672 # Note that enabling this will cause users' idle times to only be
673 # shown when the format /WHOIS <nick> <nick> is used.
676 # hidebans: If this value is set to yes, when a user is banned ([gkz]lined)
677 # only opers will see the ban message when the user is removed
681 # hidekills: If defined, replaces who set a /kill with a custom string.
684 # hidesplits: If enabled, non-opers will not be able to see which
685 # servers split in a netsplit, they will only be able to see that one
686 # occurred (If their client has netsplit detection).
689 # maxtargets: Maximum number of targets per command.
690 # (Commands like /notice, /privmsg, /kick, etc)
693 # customversion: Displays a custom string when a user /version's
694 # the ircd. This may be set for security reasons or vanity reasons.
697 # operspywhois: show opers (users/auspex) the +s channels a user is in. Values:
698 # splitmsg Split with an explanatory message
699 # yes Split with no explanatory message
703 # runasuser: If this is set, InspIRCd will attempt to setuid
704 # to run as this user- allows binding of ports under 1024.
705 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
708 # runasgroup: If this is set, InspIRCd will attempt to set group
709 # to run under this group, which allows binding of ports under 1024
710 # NOT SUPPORTED/NEEDED UNDER WINDOWS.
713 # restrictbannedusers: If this is set to yes, InspIRCd will not allow users
714 # banned on a channel to change nickname or message channels they are
716 restrictbannedusers="yes"
718 # genericoper: Setting this value to yes makes all opers on this server
719 # appear as 'is an IRC operator' in their WHOIS, regardless of their
720 # oper type, however oper types are still used internally. This only
721 # affects the display in WHOIS.
724 # userstats: /stats commands that users can run (opers can run all).
727 #-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
729 # This configuration tag defines the maximum sizes of various types #
730 # on IRC, such as the maximum length of a channel name, and the #
731 # maximum length of a channel. Note that with the exception of the #
732 # identmax value all values given here are the exact values you would #
733 # expect to see on IRC. This contrasts with the older InspIRCd #
734 # releases where these values would be one character shorter than #
735 # defined to account for a null terminator on the end of the text. #
737 # These values should match network-wide otherwise issues will occur. #
739 # The highest safe value you can set any of these options to is 500, #
740 # but it is recommended that you keep them somewhat #
741 # near their defaults (or lower). #
744 # maxnick: Maximum length of a nickname.
747 # maxchan: Maximum length of a channel name.
750 # maxmodes: Maximum number of mode changes per line.
753 # maxident: Maximum length of a ident/username.
756 # maxquit: Maximum length of a quit message.
759 # maxtopic: Maximum length of a channel topic.
762 # maxkick: Maximum length of a kick message.
765 # maxgecos: Maximum length of a GECOS (realname).
768 # maxaway: Maximum length of an away message.
772 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
776 # Logging is covered with the <log> tag, which you may use to change
777 # the behaviour of the logging of the IRCd.
779 # In InspIRCd as of 1.2, logging is pluggable and very extensible.
780 # Different files can log the same thing, different 'types' of log can
781 # go to different places, and modules can even extend the log tag
782 # to do what they want.
784 # An example log tag would be:
785 # <log method="file" type="OPER" level="default" target="opers.log">
786 # which would log all information on /oper (failed and successful) to
787 # a file called opers.log.
789 # There are many different types which may be used, and modules may
790 # generate their own. A list of useful types:
791 # - USERS - information relating to user connection and disconnection
792 # - CHANNELS - information relating to joining and parting of channels.
793 # XXX someone doc more on this
795 # You may also log *everything* by using a type of *, and subtract things out
796 # of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
798 # The following log tag is highly default and uncustomised. It is recommended you
799 # sort out your own log tags. This is just here so you get some output.
801 <log method="file" type="* -USERINPUT -USEROUTPUT" level="default" target="ircd.log">
803 #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
805 # This tag lets you define the behaviour of the /whowas command of #
810 # groupsize: Maximum entries per nick shown when performing
814 # maxgroups: Maximum number of nickgroups that can be added to
815 # the list so that /whowas does not use a lot of resources on
819 # maxkeep: Maximum time a nick is kept in the whowas list
820 # before being pruned. Time may be specified in seconds,
821 # or in the following format: 1y2w3d4h5m6s. Minimum is
825 #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
827 # The ban tags define nick masks, host masks and ip ranges which are #
828 # banned from your server. All details in these tags are local to #
833 # ipmask: IP range to ban. Wildcards and CIDR can be used.
836 # reason: Reason to display when user is disconnected.
837 reason="No porn here thanks.">
840 # nick: Nick to disallow. Wildcards are supported.
843 # reason: Reason to display on /nick.
844 reason="Reserved For Services">
846 <badnick nick="NickServ" reason="Reserved For Services">
847 <badnick nick="OperServ" reason="Reserved For Services">
848 <badnick nick="MemoServ" reason="Reserved For Services">
851 # host: ident@hostname to ban.
852 # Wildcards and CIDR (if you specify an IP) can be used.
853 host="*@hundredz.n.hundredz.o.1337.kiddies.com"
855 # reason: Reason to display when user is disconnected
856 reason="Too many 1337 kiddiots">
858 <badhost host="root@*" reason="Don't irc as root!">
859 <badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
861 # exception: Hosts that are exempt from [kgz]lines.
863 # host: ident@hostname to exempt.
864 # Wildcards and CIDR (if you specify an IP) can be used.
865 host="*@ircop.host.com"
867 # reason: Reason for exception. Only shown in /stats e
868 reason="Opers hostname">
870 #-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
872 # This optional tag allows you to specify how wide a gline, eline, #
873 # kline, zline or qline can be before it is forbidden from being #
874 # set. By setting hostmasks="yes", you can allow all G, K, E lines, #
875 # no matter how many users the ban would cover. This is not #
876 # recommended! By setting ipmasks="yes", you can allow all Z lines, #
877 # no matter how many users these cover too. Needless to say we #
878 # don't recommend you do this, or, set nickmasks="yes", which will #
883 # hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
886 # ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
889 # nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
892 # trigger: What percentage of users on the network to trigger
893 # specifying an insane ban as. The default is 95.5%, which means
894 # if you have a 1000 user network, a ban will not be allowed if it
895 # will be banning 955 or more users.
899 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
901 # You should already know what to do here :) #
903 <die value="User error. Insert new user and press any key. (you didn't edit your config properly.)">
905 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
906 # ____ _ _____ _ _ ____ _ _ _ #
907 # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
908 # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
909 # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
910 # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
912 # Well done, you've reached the end of the basic configuration, your #
913 # ircd should now start if you want to try it out! (./inspircd start) #
915 # We now suggest you read and edit modules.conf, as modules are what #
916 # provide almost all the features of InspIRCd. :) #
918 # The default does nothing -- we include it for simplicity for you. #
919 <include file="conf/modules.conf.example">
921 # Here are some pre-built modules.conf files that closely match the
922 # default configurations of some popular IRCd's. You still may want to
923 # look over them and make sure if everything is correct for you and setup
924 # the proper SSL information.
926 # *NOTE*: These files have no comments for what the modules do. If you
927 # are interested in that, please read the modules.conf.example. It is also
928 # recommended that you make your own modules file based on modules.conf.example.
930 # Settings similar to UnrealIRCd defaults.
931 #<include file="conf/modules/modules.conf.unreal">
933 # Settings similar to Charybdis IRCd defaults.
934 #<include file="conf/modules/modules.conf.charybdis">
937 #########################################################################
939 # - InspIRCd Development Team - #
940 # http://www.inspircd.org #
942 #########################################################################