Removed some debug notices that were mistakenly in the DEFAULT loglevel

[user/henk/code/inspircd.git] / include / modules.h

/*       +------------------------------------+
 *       | Inspire Internet Relay Chat Daemon |
 *       +------------------------------------+
 *
 *  InspIRCd is copyright (C) 2002-2006 ChatSpike-Dev.
 *                       E-mail:
 *                <brain@chatspike.net>
 *                <Craig@chatspike.net>
 *     
 * Written by Craig Edwards, Craig McLure, and others.
 * This program is free but copyrighted software; see
 *            the file COPYING for details.
 *
 * ---------------------------------------------------
 */


#ifndef __MODULES_H
#define __MODULES_H

/** log levels
 */
enum DebugLevels { DEBUG, VERBOSE, DEFAULT, SPARSE, NONE };

/** Used with OnExtendedMode() method of modules
 */
enum ModeTargetType { MT_CHANNEL, MT_CLIENT, MT_SERVER };

/** Used with OnAccessCheck() method of modules
 */
enum AccessControlType {
        ACR_DEFAULT,            // Do default action (act as if the module isnt even loaded)
        ACR_DENY,               // deny the action
        ACR_ALLOW,              // allow the action
        AC_KICK,                // a user is being kicked
        AC_DEOP,                // a user is being deopped
        AC_OP,                  // a user is being opped
        AC_VOICE,               // a user is being voiced
        AC_DEVOICE,             // a user is being devoiced
        AC_HALFOP,              // a user is being halfopped
        AC_DEHALFOP,            // a user is being dehalfopped
        AC_INVITE,              // a user is being invited
        AC_GENERAL_MODE         // a channel mode is being changed
};

/** Used to define a set of behavior bits for a module
 */
enum ModuleFlags {
        VF_STATIC = 1,          // module is static, cannot be /unloadmodule'd
        VF_VENDOR = 2,          // module is a vendor module (came in the original tarball, not 3rd party)
        VF_SERVICEPROVIDER = 4, // module provides a service to other modules (can be a dependency)
        VF_COMMON = 8           // module needs to be common on all servers in a network to link
};

enum WriteModeFlags {
        WM_AND = 1,
        WM_OR = 2
};

enum TargetTypeFlags {
        TYPE_USER = 1,
        TYPE_CHANNEL,
        TYPE_SERVER,
        TYPE_OTHER
};

#include "dynamic.h"
#include "base.h"
#include "ctables.h"
#include "socket.h"
#include <string>
#include <deque>
#include <sstream>
#include <typeinfo>

class Server;
class ServerConfig;

/** Low level definition of a FileReader classes file cache area
 */
typedef std::deque<std::string> file_cache;
typedef file_cache string_list;

/** Holds a list of users in a channel
 */
typedef std::deque<userrec*> chanuserlist;


// This #define allows us to call a method in all
// loaded modules in a readable simple way, e.g.:
// 'FOREACH_MOD OnConnect(user);'

#define FOREACH_MOD(y,x) if (Config->global_implementation[y] > 0) { \
        for (int _i = 0; _i <= MODCOUNT; _i++) { \
        if (Config->implement_lists[_i][y]) \
                modules[_i]->x ; \
        } \
  }

// This define is similar to the one above but returns a result in MOD_RESULT.
// The first module to return a nonzero result is the value to be accepted,
// and any modules after are ignored.

// *********************************************************************************************

#define FOREACH_RESULT(y,x) { if (Config->global_implementation[y] > 0) { \
                        MOD_RESULT = 0; \
                        for (int _i = 0; _i <= MODCOUNT; _i++) { \
                        if (Config->implement_lists[_i][y]) {\
                                int res = modules[_i]->x ; \
                                if (res != 0) { \
                                        MOD_RESULT = res; \
                                        break; \
                                } \
                        } \
                } \
        } \
 }
   
// *********************************************************************************************

#define FD_MAGIC_NUMBER -42

// useful macros

#define IS_LOCAL(x) (x->fd > -1)
#define IS_REMOTE(x) (x->fd < 0)
#define IS_MODULE_CREATED(x) (x->fd == FD_MAGIC_NUMBER)

/*extern void createcommand(char* cmd, handlerfunc f, char flags, int minparams, char* source);
extern void server_mode(char **parameters, int pcnt, userrec *user);*/

// class Version holds the version information of a Module, returned
// by Module::GetVersion (thanks RD)

/** Holds a module's Version information
 *  The four members (set by the constructor only) indicate details as to the version number
 *  of a module. A class of type Version is returned by the GetVersion method of the Module class.
 */
class Version : public classbase
{
 public:
         const int Major, Minor, Revision, Build, Flags;
         Version(int major, int minor, int revision, int build, int flags);
};

/** Holds /ADMIN data
 *  This class contains the admin details of the local server. It is constructed by class Server,
 *  and has three read-only values, Name, Email and Nick that contain the specified values for the
 *  server where the module is running.
 */
class Admin : public classbase
{
 public:
         const std::string Name, Email, Nick;
         Admin(std::string name, std::string email, std::string nick);
};


// Forward-delacare module for ModuleMessage etc
class Module;

// Thanks to Rob (from anope) for the idea of this message passing API
// (its been done before, but this seemed a very neat and tidy way...

/** The ModuleMessage class is the base class of Request and Event
 * This class is used to represent a basic data structure which is passed
 * between modules for safe inter-module communications.
 */
class ModuleMessage : public classbase
{
 public:
        /** This class is pure virtual and must be inherited.
         */
        virtual char* Send() = 0;
        virtual ~ModuleMessage() {};
};

/** The Request class is a unicast message directed at a given module.
 * When this class is properly instantiated it may be sent to a module
 * using the Send() method, which will call the given module's OnRequest
 * method with this class as its parameter.
 */
class Request : public ModuleMessage
{
 protected:
        /** This member holds a pointer to arbitary data set by the emitter of the message
         */
        char* data;
        /** This is a pointer to the sender of the message, which can be used to
         * directly trigger events, or to create a reply.
         */
        Module* source;
        /** The single destination of the Request
         */
        Module* dest;
 public:
        /** Create a new Request
         */
        Request(char* anydata, Module* src, Module* dst);
        /** Fetch the Request data
         */
        char* GetData();
        /** Fetch the request source
         */
        Module* GetSource();
        /** Fetch the request destination (should be 'this' in the receiving module)
         */
        Module* GetDest();
        /** Send the Request.
         * Upon returning the result will be arbitary data returned by the module you
         * sent the request to. It is up to your module to know what this data is and
         * how to deal with it.
         */
        char* Send();
};


/** The Event class is a unicast message directed at all modules.
 * When the class is properly instantiated it may be sent to all modules
 * using the Send() method, which will trigger the OnEvent method in
 * all modules passing the object as its parameter.
 */
class Event : public ModuleMessage
{
 protected:
        /** This member holds a pointer to arbitary data set by the emitter of the message
         */
        char* data;
        /** This is a pointer to the sender of the message, which can be used to
         * directly trigger events, or to create a reply.
         */
        Module* source;
        /** The event identifier.
         * This is arbitary text which should be used to distinguish
         * one type of event from another.
         */
        std::string id;
 public:
        /** Create a new Event
         */
        Event(char* anydata, Module* src, std::string eventid);
        /** Get the Event data
         */
        char* GetData();
        /** Get the event Source
         */
        Module* GetSource();
        /** Get the event ID.
         * Use this to determine the event type for safe casting of the data
         */
        std::string GetEventID();
        /** Send the Event.
         * The return result of an Event::Send() will always be NULL as
         * no replies are expected.
         */
        char* Send();
};

/** Holds an extended mode's details.
 * Used internally by modules.cpp
 */
class ExtMode : public classbase
{
 public:
        char modechar;
        int type;
        bool needsoper;
        int params_when_on;
        int params_when_off;
        bool list;
        ExtMode(char mc, int ty, bool oper, int p_on, int p_off) : modechar(mc), type(ty), needsoper(oper), params_when_on(p_on), params_when_off(p_off), list(false) { };
};

/** Priority types which can be returned from Module::Prioritize()
 */
enum Priority { PRIORITY_FIRST, PRIORITY_DONTCARE, PRIORITY_LAST, PRIORITY_BEFORE, PRIORITY_AFTER };

/** Implementation-specific flags which may be set in Module::Implements()
 */
enum Implementation {   I_OnUserConnect, I_OnUserQuit, I_OnUserDisconnect, I_OnUserJoin, I_OnUserPart, I_OnRehash, I_OnServerRaw, 
                        I_OnExtendedMode, I_OnUserPreJoin, I_OnUserPreKick, I_OnUserKick, I_OnOper, I_OnInfo, I_OnWhois, I_OnUserPreInvite,
                        I_OnUserInvite, I_OnUserPreMessage, I_OnUserPreNotice, I_OnUserPreNick, I_OnUserMessage, I_OnUserNotice, I_OnMode,
                        I_OnGetServerDescription, I_OnSyncUser, I_OnSyncChannel, I_OnSyncChannelMetaData, I_OnSyncUserMetaData,
                        I_OnDecodeMetaData, I_ProtoSendMode, I_ProtoSendMetaData, I_OnWallops, I_OnChangeHost, I_OnChangeName, I_OnAddGLine,
                        I_OnAddZLine, I_OnAddQLine, I_OnAddKLine, I_OnAddELine, I_OnDelGLine, I_OnDelZLine, I_OnDelKLine, I_OnDelELine, I_OnDelQLine,
                        I_OnCleanup, I_OnUserPostNick, I_OnAccessCheck, I_On005Numeric, I_OnKill, I_OnRemoteKill, I_OnLoadModule, I_OnUnloadModule,
                        I_OnBackgroundTimer, I_OnSendList, I_OnPreCommand, I_OnCheckReady, I_OnUserRrgister, I_OnRawMode, I_OnCheckInvite,
                        I_OnCheckKey, I_OnCheckLimit, I_OnCheckBan, I_OnStats, I_OnChangeLocalUserHost, I_OnChangeLocalUserGecos, I_OnLocalTopicChange,
                        I_OnPostLocalTopicChange, I_OnEvent, I_OnRequest, I_OnOperCompre, I_OnGlobalOper, I_OnGlobalConnect, I_OnAddBan, I_OnDelBan,
                        I_OnRawSocketAccept, I_OnRawSocketClose, I_OnRawSocketWrite, I_OnRawSocketRead, I_OnChangeLocalUserGECOS, I_OnUserRegister,
                        I_OnOperCompare, I_OnChannelDelete, I_OnPostOper, I_OnSyncOtherMetaData, I_OnSetAway, I_OnCancelAway };

/** Base class for all InspIRCd modules
 *  This class is the base class for InspIRCd modules. All modules must inherit from this class,
 *  its methods will be called when irc server events occur. class inherited from module must be
 *  instantiated by the ModuleFactory class (see relevent section) for the plugin to be initialised.
 */
class Module : public classbase
{
 public:

        /** Default constructor
         * Creates a module class.
         * @param Me An instance of the Server class which can be saved for future use
         */
        Module(Server* Me);

        /** Default destructor
         * destroys a module class
         */
        virtual ~Module();

        /** Returns the version number of a Module.
         * The method should return a Version object with its version information assigned via
         * Version::Version
         */
        virtual Version GetVersion();

        /** The Implements function specifies which methods a module should receive events for.
         * The char* parameter passed to this function contains a set of true or false values
         * (1 or 0) which indicate wether each function is implemented. You must use the Iimplementation
         * enum (documented elsewhere on this page) to mark functions as active. For example, to
         * receive events for OnUserJoin():
         *
         * Implements[I_OnUserJoin] = 1;
         *
         * @param The implement list
         */
        virtual void Implements(char* Implements);

        /** Used to set the 'priority' of a module (e.g. when it is called in relation to other modules.
         * Some modules prefer to be called before other modules, due to their design. For example, a
         * module which is expected to operate on complete information would expect to be placed last, so
         * that any other modules which wish to adjust that information would execute before it, to be sure
         * its information is correct. You can change your module's priority by returning one of:
         *
         * PRIORITY_FIRST - To place your module first in the list
         * 
         * PRIORITY_LAST - To place your module last in the list
         *
         * PRIORITY_DONTCARE - To leave your module as it is (this is the default value, if you do not implement this function)
         *
         * The result of Server::PriorityBefore() - To move your module before another named module
         *
         * The result of Server::PriorityLast() - To move your module after another named module
         *
         * For a good working example of this method call, please see src/modules/m_spanningtree.cpp
         * and src/modules/m_hostchange.so which make use of it. It is highly recommended that unless
         * your module has a real need to reorder its priority, it should not implement this function,
         * as many modules changing their priorities can make the system redundant.
         */
        virtual Priority Prioritize();

        /** Called when a user connects.
         * The details of the connecting user are available to you in the parameter userrec *user
         * @param user The user who is connecting
         */
        virtual void OnUserConnect(userrec* user);

        /** Called when a user quits.
         * The details of the exiting user are available to you in the parameter userrec *user
         * This event is only called when the user is fully registered when they quit. To catch
         * raw disconnections, use the OnUserDisconnect method.
         * @param user The user who is quitting
         * @param message The user's quit message
         */
        virtual void OnUserQuit(userrec* user, std::string message);

        /** Called whenever a user's socket is closed.
         * The details of the exiting user are available to you in the parameter userrec *user
         * This event is called for all users, registered or not, as a cleanup method for modules
         * which might assign resources to user, such as dns lookups, objects and sockets.
         * @param user The user who is disconnecting
         */
        virtual void OnUserDisconnect(userrec* user);

        /** Called whenever a channel is deleted, either by QUIT, KICK or PART.
         * @param chan The channel being deleted
         */
        virtual void OnChannelDelete(chanrec* chan);

        /** Called when a user joins a channel.
         * The details of the joining user are available to you in the parameter userrec *user,
         * and the details of the channel they have joined is available in the variable chanrec *channel
         * @param user The user who is joining
         * @param channel The channel being joined
         */
        virtual void OnUserJoin(userrec* user, chanrec* channel);

        /** Called when a user parts a channel.
         * The details of the leaving user are available to you in the parameter userrec *user,
         * and the details of the channel they have left is available in the variable chanrec *channel
         * @param user The user who is parting
         * @param channel The channel being parted
         * @param partmessage The part message, or an empty string
         */
        virtual void OnUserPart(userrec* user, chanrec* channel, std::string partmessage);

        /** Called on rehash.
         * This method is called prior to a /REHASH or when a SIGHUP is received from the operating
         * system. You should use it to reload any files so that your module keeps in step with the
         * rest of the application. If a parameter is given, the core has done nothing. The module
         * receiving the event can decide if this parameter has any relevence to it.
         * @param parameter The (optional) parameter given to REHASH from the user.
         */
        virtual void OnRehash(std::string parameter);

        /** Called when a raw command is transmitted or received.
         * This method is the lowest level of handler available to a module. It will be called with raw
         * data which is passing through a connected socket. If you wish, you may munge this data by changing
         * the string parameter "raw". If you do this, after your function exits it will immediately be
         * cut down to 510 characters plus a carriage return and linefeed. For INBOUND messages only (where
         * inbound is set to true) the value of user will be the userrec of the connection sending the
         * data. This is not possible for outbound data because the data may be being routed to multiple targets.
         * @param raw The raw string in RFC1459 format
         * @param inbound A flag to indicate wether the data is coming into the daemon or going out to the user
         * @param user The user record sending the text, when inbound == true.
         */
        virtual void OnServerRaw(std::string &raw, bool inbound, userrec* user);

        /** Called whenever an extended mode is to be processed.
         * The type parameter is MT_SERVER, MT_CLIENT or MT_CHANNEL, dependent on where the mode is being
         * changed. mode_on is set when the mode is being set, in which case params contains a list of
         * parameters for the mode as strings. If mode_on is false, the mode is being removed, and parameters
         * may contain the parameters for the mode, dependent on wether they were defined when a mode handler
         * was set up with Server::AddExtendedMode
         * If the mode is a channel mode, target is a chanrec*, and if it is a user mode, target is a userrec*.
         * You must cast this value yourself to make use of it.
         * @param user The user issuing the mode
         * @param target The user or channel having the mode set on them
         * @param modechar The mode character being set
         * @param type The type of mode (user or channel) being set
         * @param mode_on True if the mode is being set, false if it is being unset
         * @param params A list of parameters for any channel mode (currently supports either 0 or 1 parameters)
         */
        virtual int OnExtendedMode(userrec* user, void* target, char modechar, int type, bool mode_on, string_list &params);
        
        /** Called whenever a user is about to join a channel, before any processing is done.
         * Returning a value of 1 from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc. This is useful for modules which may want to mimic +b, +k, +l etc. Returning -1 from
         * this function forces the join to be allowed, bypassing restrictions such as banlists, invite, keys etc.
         *
         * IMPORTANT NOTE!
         *
         * If the user joins a NEW channel which does not exist yet, OnUserPreJoin will be called BEFORE the channel
         * record is created. This will cause chanrec* chan to be NULL. There is very little you can do in form of
         * processing on the actual channel record at this point, however the channel NAME will still be passed in
         * char* cname, so that you could for example implement a channel blacklist or whitelist, etc.
         * @param user The user joining the channel
         * @param cname The channel name being joined
         * @return 1 To prevent the join, 0 to allow it.
         */
        virtual int OnUserPreJoin(userrec* user, chanrec* chan, const char* cname);
        
        /** Called whenever a user is about to be kicked.
         * Returning a value of 1 from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc.
         * @param source The user issuing the kick
         * @param user The user being kicked
         * @param chan The channel the user is being kicked from
         * @param reason The kick reason
         * @return 1 to prevent the kick, 0 to continue normally, -1 to explicitly allow the kick regardless of normal operation
         */
        virtual int OnUserPreKick(userrec* source, userrec* user, chanrec* chan, std::string reason);

        /** Called whenever a user is kicked.
         * If this method is called, the kick is already underway and cannot be prevented, so
         * to prevent a kick, please use Module::OnUserPreKick instead of this method.
         * @param source The user issuing the kick
         * @param user The user being kicked
         * @param chan The channel the user is being kicked from
         * @param reason The kick reason
         */
        virtual void OnUserKick(userrec* source, userrec* user, chanrec* chan, std::string reason);

        /** Called whenever a user opers locally.
         * The userrec will contain the oper mode 'o' as this function is called after any modifications
         * are made to the user's structure by the core.
         * @param user The user who is opering up
         * @param opertype The opers type name
         */
        virtual void OnOper(userrec* user, std::string opertype);

        /** Called after a user opers locally.
         * This is identical to Module::OnOper(), except it is called after OnOper so that other modules
         * can be gauranteed to already have processed the oper-up, for example m_spanningtree has sent
         * out the OPERTYPE, etc.
         * @param user The user who is opering up
         * @param opertype The opers type name
         */
        virtual void OnPostOper(userrec* user, std::string opertype);
        
        /** Called whenever a user types /INFO.
         * The userrec will contain the information of the user who typed the command. Modules may use this
         * method to output their own credits in /INFO (which is the ircd's version of an about box).
         * It is purposefully not possible to modify any info that has already been output, or halt the list.
         * You must write a 371 numeric to the user, containing your info in the following format:
         *
         * &lt;nick&gt; :information here
         *
         * @param user The user issuing /INFO
         */
        virtual void OnInfo(userrec* user);
        
        /** Called whenever a /WHOIS is performed on a local user.
         * The source parameter contains the details of the user who issued the WHOIS command, and
         * the dest parameter contains the information of the user they are whoising.
         * @param source The user issuing the WHOIS command
         * @param dest The user who is being WHOISed
         */
        virtual void OnWhois(userrec* source, userrec* dest);
        
        /** Called whenever a user is about to invite another user into a channel, before any processing is done.
         * Returning 1 from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc. This is useful for modules which may want to filter invites to channels.
         * @param source The user who is issuing the INVITE
         * @param dest The user being invited
         * @param channel The channel the user is being invited to
         * @return 1 to deny the invite, 0 to allow
         */
        virtual int OnUserPreInvite(userrec* source,userrec* dest,chanrec* channel);
        
        /** Called after a user has been successfully invited to a channel.
         * You cannot prevent the invite from occuring using this function, to do that,
         * use OnUserPreInvite instead.
         * @param source The user who is issuing the INVITE
         * @param dest The user being invited
         * @param channel The channel the user is being invited to
         */
        virtual void OnUserInvite(userrec* source,userrec* dest,chanrec* channel);
        
        /** Called whenever a user is about to PRIVMSG A user or a channel, before any processing is done.
         * Returning any nonzero value from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc. This is useful for modules which may want to filter or redirect messages.
         * target_type can be one of TYPE_USER or TYPE_CHANNEL. If the target_type value is a user,
         * you must cast dest to a userrec* otherwise you must cast it to a chanrec*, this is the details
         * of where the message is destined to be sent.
         * @param user The user sending the message
         * @param dest The target of the message (chanrec* or userrec*)
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text Changeable text being sent by the user
         * @param status The status being used, e.g. PRIVMSG @#chan has status== '@', 0 to send to everyone.
         * @return 1 to deny the NOTICE, 0 to allow it
         */
        virtual int OnUserPreMessage(userrec* user,void* dest,int target_type, std::string &text,char status);

        /** Called whenever a user is about to NOTICE A user or a channel, before any processing is done.
         * Returning any nonzero value from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc. This is useful for modules which may want to filter or redirect messages.
         * target_type can be one of TYPE_USER or TYPE_CHANNEL. If the target_type value is a user,
         * you must cast dest to a userrec* otherwise you must cast it to a chanrec*, this is the details
         * of where the message is destined to be sent.
         * You may alter the message text as you wish before relinquishing control to the next module
         * in the chain, and if no other modules block the text this altered form of the text will be sent out
         * to the user and possibly to other servers.
         * @param user The user sending the message
         * @param dest The target of the message (chanrec* or userrec*)
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text Changeable text being sent by the user
         * @param status The status being used, e.g. PRIVMSG @#chan has status== '@', 0 to send to everyone.
         * @return 1 to deny the NOTICE, 0 to allow it
         */
        virtual int OnUserPreNotice(userrec* user,void* dest,int target_type, std::string &text,char status);
        
        /** Called before any nickchange, local or remote. This can be used to implement Q-lines etc.
         * Please note that although you can see remote nickchanges through this function, you should
         * NOT make any changes to the userrec if the user is a remote user as this may cause a desnyc.
         * check user->server before taking any action (including returning nonzero from the method).
         * If your method returns nonzero, the nickchange is silently forbidden, and it is down to your
         * module to generate some meaninful output.
         * @param user The username changing their nick
         * @param newnick Their new nickname
         * @return 1 to deny the change, 0 to allow
         */
        virtual int OnUserPreNick(userrec* user, std::string newnick);

        /** Called after any PRIVMSG sent from a user.
         * The dest variable contains a userrec* if target_type is TYPE_USER and a chanrec*
         * if target_type is TYPE_CHANNEL.
         * @param user The user sending the message
         * @param dest The target of the message
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text the text being sent by the user
         * @param status The status being used, e.g. PRIVMSG @#chan has status== '@', 0 to send to everyone.
         */
        virtual void OnUserMessage(userrec* user, void* dest, int target_type, std::string text, char status);

        /** Called after any NOTICE sent from a user.
         * The dest variable contains a userrec* if target_type is TYPE_USER and a chanrec*
         * if target_type is TYPE_CHANNEL.
         * @param user The user sending the message
         * @param dest The target of the message
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text the text being sent by the user
         * @param status The status being used, e.g. NOTICE @#chan has status== '@', 0 to send to everyone.
         */
        virtual void OnUserNotice(userrec* user, void* dest, int target_type, std::string text, char status);

        /** Called after every MODE command sent from a user
         * The dest variable contains a userrec* if target_type is TYPE_USER and a chanrec*
         * if target_type is TYPE_CHANNEL. The text variable contains the remainder of the
         * mode string after the target, e.g. "+wsi" or "+ooo nick1 nick2 nick3".
         * @param user The user sending the MODEs
         * @param dest The target of the modes (userrec* or chanrec*)
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text The actual modes and their parameters if any
         */
        virtual void OnMode(userrec* user, void* dest, int target_type, std::string text);

        /** Allows modules to alter or create server descriptions
         * Whenever a module requires a server description, for example for display in
         * WHOIS, this function is called in all modules. You may change or define the
         * description given in std::string &description. If you do, this description
         * will be shown in the WHOIS fields.
         * @param servername The servername being searched for
         * @param description Alterable server description for this server
         */
        virtual void OnGetServerDescription(std::string servername,std::string &description);

        /** Allows modules to synchronize data which relates to users during a netburst.
         * When this function is called, it will be called from the module which implements
         * the linking protocol. This currently is m_spanningtree.so. A pointer to this module
         * is given in Module* proto, so that you may call its methods such as ProtoSendMode
         * (see below). This function will be called for every user visible on your side
         * of the burst, allowing you to for example set modes, etc. Do not use this call to
         * synchronize data which you have stored using class Extensible -- There is a specialist
         * function OnSyncUserMetaData and OnSyncChannelMetaData for this!
         * @param user The user being syncronized
         * @param proto A pointer to the module handling network protocol
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         */
        virtual void OnSyncUser(userrec* user, Module* proto, void* opaque);

        /** Allows modules to synchronize data which relates to channels during a netburst.
         * When this function is called, it will be called from the module which implements
         * the linking protocol. This currently is m_spanningtree.so. A pointer to this module
         * is given in Module* proto, so that you may call its methods such as ProtoSendMode
         * (see below). This function will be called for every user visible on your side
         * of the burst, allowing you to for example set modes, etc. Do not use this call to
         * synchronize data which you have stored using class Extensible -- There is a specialist
         * function OnSyncUserMetaData and OnSyncChannelMetaData for this!
         *
         * For a good example of how to use this function, please see src/modules/m_chanprotect.cpp
         *
         * @param chan The channel being syncronized
         * @param proto A pointer to the module handling network protocol
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         */
        virtual void OnSyncChannel(chanrec* chan, Module* proto, void* opaque);

        /* Allows modules to syncronize metadata related to channels over the network during a netburst.
         * Whenever the linking module wants to send out data, but doesnt know what the data
         * represents (e.g. it is Extensible metadata, added to a userrec or chanrec by a module) then
         * this method is called.You should use the ProtoSendMetaData function after you've
         * correctly decided how the data should be represented, to send the metadata on its way if it belongs
         * to your module. For a good example of how to use this method, see src/modules/m_swhois.cpp.
         * @param chan The channel whos metadata is being syncronized
         * @param proto A pointer to the module handling network protocol
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         * @param extname The extensions name which is being searched for
         */
        virtual void OnSyncChannelMetaData(chanrec* chan, Module* proto,void* opaque, std::string extname);

        /* Allows modules to syncronize metadata related to users over the network during a netburst.
         * Whenever the linking module wants to send out data, but doesnt know what the data
         * represents (e.g. it is Extensible metadata, added to a userrec or chanrec by a module) then
         * this method is called. You should use the ProtoSendMetaData function after you've
         * correctly decided how the data should be represented, to send the metadata on its way if
         * if it belongs to your module.
         * @param user The user whos metadata is being syncronized
         * @param proto A pointer to the module handling network protocol
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         * @param extname The extensions name which is being searched for
         */
        virtual void OnSyncUserMetaData(userrec* user, Module* proto,void* opaque, std::string extname);

        /* Allows modules to syncronize metadata not related to users or channels, over the network during a netburst.
         * Whenever the linking module wants to send out data, but doesnt know what the data
         * represents (e.g. it is Extensible metadata, added to a userrec or chanrec by a module) then
         * this method is called. You should use the ProtoSendMetaData function after you've
         * correctly decided how the data should be represented, to send the metadata on its way if
         * if it belongs to your module.
         * @param proto A pointer to the module handling network protocol
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         */
        virtual void OnSyncOtherMetaData(Module* proto, void* opaque);

        /** Allows module data, sent via ProtoSendMetaData, to be decoded again by a receiving module.
         * Please see src/modules/m_swhois.cpp for a working example of how to use this method call.
         * @param target_type The type of item to decode data for, TYPE_USER or TYPE_CHANNEL
         * @param target The chanrec* or userrec* that data should be added to
         * @param extname The extension name which is being sent
         * @param extdata The extension data, encoded at the other end by an identical module through OnSyncChannelMetaData or OnSyncUserMetaData
         */
        virtual void OnDecodeMetaData(int target_type, void* target, std::string extname, std::string extdata);

        /** Implemented by modules which provide the ability to link servers.
         * These modules will implement this method, which allows transparent sending of servermodes
         * down the network link as a broadcast, without a module calling it having to know the format
         * of the MODE command before the actual mode string.
         *
         * More documentation to follow soon. Please see src/modules/m_chanprotect.cpp for examples
         * of how to use this function.
         *
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         * @param target_type The type of item to decode data for, TYPE_USER or TYPE_CHANNEL
         * @param target The chanrec* or userrec* that modes should be sent for
         * @param modeline The modes and parameters to be sent
         */
        virtual void ProtoSendMode(void* opaque, int target_type, void* target, std::string modeline);

        /** Implemented by modules which provide the ability to link servers.
         * These modules will implement this method, which allows metadata (extra data added to
         * user and channel records using class Extensible, Extensible::Extend, etc) to be sent
         * to other servers on a netburst and decoded at the other end by the same module on a
         * different server.
         *
         * More documentation to follow soon. Please see src/modules/m_swhois.cpp for example of
         * how to use this function.
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         * @param target_type The type of item to decode data for, TYPE_USER or TYPE_CHANNEL
         * @param target The chanrec* or userrec* that metadata should be sent for
         * @param extname The extension name to send metadata for
         * @param extdata Encoded data for this extension name, which will be encoded at the oppsite end by an identical module using OnDecodeMetaData
         */
        virtual void ProtoSendMetaData(void* opaque, int target_type, void* target, std::string extname, std::string extdata);
        
        /** Called after every WALLOPS command.
         * @param user The user sending the WALLOPS
         * @param text The content of the WALLOPS message
         */
        virtual void OnWallops(userrec* user, std::string text);

        /** Called whenever a user's hostname is changed.
         * This event triggers after the host has been set.
         * @param user The user whos host is being changed
         * @param newhost The new hostname being set
         */
        virtual void OnChangeHost(userrec* user, std::string newhost);

        /** Called whenever a user's GECOS (realname) is changed.
         * This event triggers after the name has been set.
         * @param user The user who's GECOS is being changed
         * @param gecos The new GECOS being set on the user
         */
        virtual void OnChangeName(userrec* user, std::string gecos);

        /** Called whenever a gline is added by a local user.
         * This method is triggered after the line is added.
         * @param duration The duration of the line in seconds
         * @param source The sender of the line
         * @param reason The reason text to be displayed
         * @param hostmask The hostmask to add
         */
        virtual void OnAddGLine(long duration, userrec* source, std::string reason, std::string hostmask);

        /** Called whenever a zline is added by a local user.
         * This method is triggered after the line is added.
         * @param duration The duration of the line in seconds
         * @param source The sender of the line
         * @param reason The reason text to be displayed
         * @param ipmask The hostmask to add
         */
        virtual void OnAddZLine(long duration, userrec* source, std::string reason, std::string ipmask);

        /** Called whenever a kline is added by a local user.
         * This method is triggered after the line is added.
         * @param duration The duration of the line in seconds
         * @param source The sender of the line
         * @param reason The reason text to be displayed
         * @param hostmask The hostmask to add
         */
        virtual void OnAddKLine(long duration, userrec* source, std::string reason, std::string hostmask);

        /** Called whenever a qline is added by a local user.
         * This method is triggered after the line is added.
         * @param duration The duration of the line in seconds
         * @param source The sender of the line
         * @param reason The reason text to be displayed
         * @param nickmask The hostmask to add
         */
        virtual void OnAddQLine(long duration, userrec* source, std::string reason, std::string nickmask);

        /** Called whenever a eline is added by a local user.
         * This method is triggered after the line is added.
         * @param duration The duration of the line in seconds
         * @param source The sender of the line
         * @param reason The reason text to be displayed
         * @param hostmask The hostmask to add
         */
        virtual void OnAddELine(long duration, userrec* source, std::string reason, std::string hostmask);

        /** Called whenever a gline is deleted.
         * This method is triggered after the line is deleted.
         * @param source The user removing the line
         * @param hostmask The hostmask to delete
         */
        virtual void OnDelGLine(userrec* source, std::string hostmask);

        /** Called whenever a zline is deleted.
         * This method is triggered after the line is deleted.
         * @param source The user removing the line
         * @param hostmask The hostmask to delete
         */
        virtual void OnDelZLine(userrec* source, std::string ipmask);

        /** Called whenever a kline is deleted.
         * This method is triggered after the line is deleted.
         * @param source The user removing the line
         * @param hostmask The hostmask to delete
         */
        virtual void OnDelKLine(userrec* source, std::string hostmask);
        
        /** Called whenever a qline is deleted.
         * This method is triggered after the line is deleted.
         * @param source The user removing the line
         * @param hostmask The hostmask to delete
         */
        virtual void OnDelQLine(userrec* source, std::string nickmask);

        /** Called whenever a eline is deleted.
         * This method is triggered after the line is deleted.
         * @param source The user removing the line
         * @param hostmask The hostmask to delete
         */
        virtual void OnDelELine(userrec* source, std::string hostmask);

        /** Called before your module is unloaded to clean up Extensibles.
         * This method is called once for every user and channel on the network,
         * so that when your module unloads it may clear up any remaining data
         * in the form of Extensibles added using Extensible::Extend().
         * If the target_type variable is TYPE_USER, then void* item refers to
         * a userrec*, otherwise it refers to a chanrec*.
         * @param target_type The type of item being cleaned
         * @param item A pointer to the item's class
         */
        virtual void OnCleanup(int target_type, void* item);

        /** Called after any nickchange, local or remote. This can be used to track users after nickchanges
         * have been applied. Please note that although you can see remote nickchanges through this function, you should
         * NOT make any changes to the userrec if the user is a remote user as this may cause a desnyc.
         * check user->server before taking any action (including returning nonzero from the method).
         * Because this method is called after the nickchange is taken place, no return values are possible
         * to indicate forbidding of the nick change. Use OnUserPreNick for this.
         * @param user The user changing their nick
         * @param oldnick The old nickname of the user before the nickchange
         */
        virtual void OnUserPostNick(userrec* user, std::string oldnick);

        /** Called before an action which requires a channel privilage check.
         * This function is called before many functions which check a users status on a channel, for example
         * before opping a user, deopping a user, kicking a user, etc.
         * There are several values for access_type which indicate for what reason access is being checked.
         * These are:<br><br>
         * AC_KICK (0) - A user is being kicked<br>
         * AC_DEOP (1) - a user is being deopped<br>
         * AC_OP (2) - a user is being opped<br>
         * AC_VOICE (3) - a user is being voiced<br>
         * AC_DEVOICE (4) - a user is being devoiced<br>
         * AC_HALFOP (5) - a user is being halfopped<br>
         * AC_DEHALFOP (6) - a user is being dehalfopped<br>
         * AC_INVITE (7) - a user is being invited<br>
         * AC_GENERAL_MODE (8) - a user channel mode is being changed<br><br>
         * Upon returning from your function you must return either ACR_DEFAULT, to indicate the module wishes
         * to do nothing, or ACR_DENY where approprate to deny the action, and ACR_ALLOW where appropriate to allow
         * the action. Please note that in the case of some access checks (such as AC_GENERAL_MODE) access may be
         * denied 'upstream' causing other checks such as AC_DEOP to not be reached. Be very careful with use of the
         * AC_GENERAL_MODE type, as it may inadvertently override the behaviour of other modules. When the access_type
         * is AC_GENERAL_MODE, the destination of the mode will be NULL (as it has not yet been determined).
         * @param source The source of the access check
         * @param dest The destination of the access check
         * @param channel The channel which is being checked
         * @param access_type See above
         */
        virtual int OnAccessCheck(userrec* source,userrec* dest,chanrec* channel,int access_type);

        /** Called when a 005 numeric is about to be output.
         * The module should modify the 005 numeric if needed to indicate its features.
         * @param output The 005 string to be modified if neccessary.
         */
        virtual void On005Numeric(std::string &output);

        /** Called when a client is disconnected by KILL.
         * If a client is killed by a server, e.g. a nickname collision or protocol error,
         * source is NULL.
         * Return 1 from this function to prevent the kill, and 0 from this function to allow
         * it as normal. If you prevent the kill no output will be sent to the client, it is
         * down to your module to generate this information.
         * NOTE: It is NOT advisable to stop kills which originate from servers or remote users.
         * If you do so youre risking race conditions, desyncs and worse!
         * @param source The user sending the KILL
         * @param dest The user being killed
         * @param reason The kill reason
         * @return 1 to prevent the kill, 0 to allow
         */
        virtual int OnKill(userrec* source, userrec* dest, std::string reason);

        /** Called when an oper wants to disconnect a remote user via KILL
         * @param source The user sending the KILL
         * @param dest The user being killed
         * @param reason The kill reason
         */
        virtual void OnRemoteKill(userrec* source, userrec* dest, std::string reason);

        /** Called whenever a module is loaded.
         * mod will contain a pointer to the module, and string will contain its name,
         * for example m_widgets.so. This function is primary for dependency checking,
         * your module may decide to enable some extra features if it sees that you have
         * for example loaded "m_killwidgets.so" with "m_makewidgets.so". It is highly
         * recommended that modules do *NOT* bail if they cannot satisfy dependencies,
         * but instead operate under reduced functionality, unless the dependency is
         * absolutely neccessary (e.g. a module that extends the features of another
         * module).
         * @param mod A pointer to the new module
         * @param name The new module's filename
         */
        virtual void OnLoadModule(Module* mod,std::string name);

        /** Called whenever a module is unloaded.
         * mod will contain a pointer to the module, and string will contain its name,
         * for example m_widgets.so. This function is primary for dependency checking,
         * your module may decide to enable some extra features if it sees that you have
         * for example loaded "m_killwidgets.so" with "m_makewidgets.so". It is highly
         * recommended that modules do *NOT* bail if they cannot satisfy dependencies,
         * but instead operate under reduced functionality, unless the dependency is
         * absolutely neccessary (e.g. a module that extends the features of another
         * module).
         * @param mod Pointer to the module being unloaded (still valid)
         * @param name The filename of the module being unloaded
         */
        virtual void OnUnloadModule(Module* mod,std::string name);

        /** Called once every five seconds for background processing.
         * This timer can be used to control timed features. Its period is not accurate
         * enough to be used as a clock, but it is gauranteed to be called at least once in
         * any five second period, directly from the main loop of the server.
         * @param curtime The current timer derived from time(2)
         */
        virtual void OnBackgroundTimer(time_t curtime);

        /** Called whenever a list is needed for a listmode.
         * For example, when a /MODE #channel +b (without any other parameters) is called,
         * if a module was handling +b this function would be called. The function can then
         * output any lists it wishes to. Please note that all modules will see all mode
         * characters to provide the ability to extend each other, so please only output
         * a list if the mode character given matches the one(s) you want to handle.
         * @param user The user requesting the list
         * @param channel The channel the list is for
         * @param mode The listmode which a list is being requested on
         */
        virtual void OnSendList(userrec* user, chanrec* channel, char mode);

        /** Called whenever any command is about to be executed.
         * This event occurs for all registered commands, wether they are registered in the core,
         * or another module, but it will not occur for invalid commands (e.g. ones which do not
         * exist within the command table). By returning 1 from this method you may prevent the
         * command being executed. If you do this, no output is created by the core, and it is
         * down to your module to produce any output neccessary.
         * Note that unless you return 1, you should not destroy any structures (e.g. by using
         * Server::QuitUser) otherwise when the command's handler function executes after your
         * method returns, it will be passed an invalid pointer to the user object and crash!)
         * @param command The command being executed
         * @param parameters An array of array of characters containing the parameters for the command
         * @param pcnt The nuimber of parameters passed to the command
         * @param user the user issuing the command
         * @param validated True if the command has passed all checks, e.g. it is recognised, has enough parameters, the user has permission to execute it, etc.
         * @return 1 to block the command, 0 to allow
         */
        virtual int OnPreCommand(std::string command, char **parameters, int pcnt, userrec *user, bool validated);

        /** Called to check if a user who is connecting can now be allowed to register
         * If any modules return false for this function, the user is held in the waiting
         * state until all modules return true. For example a module which implements ident
         * lookups will continue to return false for a user until their ident lookup is completed.
         * Note that the registration timeout for a user overrides these checks, if the registration
         * timeout is reached, the user is disconnected even if modules report that the user is
         * not ready to connect.
         * @param user The user to check
         * @return true to indicate readiness, false if otherwise
         */
        virtual bool OnCheckReady(userrec* user);

        /** Called whenever a user is about to register their connection (e.g. before the user
         * is sent the MOTD etc). Modules can use this method if they are performing a function
         * which must be done before the actual connection is completed (e.g. ident lookups,
         * dnsbl lookups, etc).
         * Note that you should NOT delete the user record here by causing a disconnection!
         * Use OnUserConnect for that instead.
         * @param user The user registering
         */
        virtual void OnUserRegister(userrec* user);

        /** Called whenever a mode character is processed.
         * Return 1 from this function to block the mode character from being processed entirely,
         * so that you may perform your own code instead. Note that this method allows you to override
         * modes defined by other modes, but this is NOT RECOMMENDED!
         * @param user The user who is sending the mode
         * @param chan The channel the mode is being sent to
         * @param mode The mode character being set
         * @param param The parameter for the mode or an empty string
         * @param adding true of the mode is being added, false if it is being removed
         * @param pcnt The parameter count for the mode (0 or 1)
         * @return 1 to deny the mode, 0 to allow
         */
        virtual int OnRawMode(userrec* user, chanrec* chan, char mode, std::string param, bool adding, int pcnt);

        /** Called whenever a user joins a channel, to determine if invite checks should go ahead or not.
         * This method will always be called for each join, wether or not the channel is actually +i, and
         * determines the outcome of an if statement around the whole section of invite checking code.
         * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
         * @param user The user joining the channel
         * @param chan The channel being joined
         * @return 1 to explicitly allow the join, 0 to proceed as normal
         */
        virtual int OnCheckInvite(userrec* user, chanrec* chan);

        /** Called whenever a user joins a channel, to determine if key checks should go ahead or not.
         * This method will always be called for each join, wether or not the channel is actually +k, and
         * determines the outcome of an if statement around the whole section of key checking code.
         * if the user specified no key, the keygiven string will be a valid but empty value.
         * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
         * @param user The user joining the channel
         * @param chan The channel being joined
         * @return 1 to explicitly allow the join, 0 to proceed as normal
         */
        virtual int OnCheckKey(userrec* user, chanrec* chan, std::string keygiven);

        /** Called whenever a user joins a channel, to determine if channel limit checks should go ahead or not.
         * This method will always be called for each join, wether or not the channel is actually +l, and
         * determines the outcome of an if statement around the whole section of channel limit checking code.
         * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
         * @param user The user joining the channel
         * @param chan The channel being joined
         * @return 1 to explicitly allow the join, 0 to proceed as normal
         */
        virtual int OnCheckLimit(userrec* user, chanrec* chan);

        /** Called whenever a user joins a channel, to determine if banlist checks should go ahead or not.
         * This method will always be called for each join, wether or not the user actually matches a channel ban, and
         * determines the outcome of an if statement around the whole section of ban checking code.
         * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
         * @param user The user joining the channel
         * @param chan The channel being joined
         * @return 1 to explicitly allow the join, 0 to proceed as normal
         */
        virtual int OnCheckBan(userrec* user, chanrec* chan);

        /** Called on all /STATS commands
         * This method is triggered for all /STATS use, including stats symbols handled by the core.
         * @param symbol the symbol provided to /STATS
         * @user the user issuing the /STATS command
         * @return 1 to block the /STATS from being processed by the core, 0 to allow it
         */
        virtual int OnStats(char symbol, userrec* user);

        /** Called whenever a change of a local users displayed host is attempted.
         * Return 1 to deny the host change, or 0 to allow it.
         * @param user The user whos host will be changed
         * @param newhost The new hostname
         * @return 1 to deny the host change, 0 to allow
         */
        virtual int OnChangeLocalUserHost(userrec* user, std::string newhost);

        /** Called whenever a change of a local users GECOS (fullname field) is attempted.
         * return 1 to deny the name change, or 0 to allow it.
         * @param user The user whos GECOS will be changed
         * @param newhost The new GECOS
         * @return 1 to deny the GECOS change, 0 to allow
         */
        virtual int OnChangeLocalUserGECOS(userrec* user, std::string newhost); 

        /** Called whenever a topic is changed by a local user.
         * Return 1 to deny the topic change, or 0 to allow it.
         * @param user The user changing the topic
         * @param chan The channels who's topic is being changed
         * @param topic The actual topic text
         * @param 1 to block the topic change, 0 to allow
         */
        virtual int OnLocalTopicChange(userrec* user, chanrec* chan, std::string topic);

        /** Called whenever a local topic has been changed.
         * To block topic changes you must use OnLocalTopicChange instead.
         * @param user The user changing the topic
         * @param chan The channels who's topic is being changed
         * @param topic The actual topic text
         */
        virtual void OnPostLocalTopicChange(userrec* user, chanrec* chan, std::string topic);

        /** Called whenever an Event class is sent to all module by another module.
         * Please see the documentation of Event::Send() for further information. The Event sent can
         * always be assumed to be non-NULL, you should *always* check the value of Event::GetEventID()
         * before doing anything to the event data, and you should *not* change the event data in any way!
         * @param event The Event class being received
         */
        virtual void OnEvent(Event* event);

        /** Called whenever a Request class is sent to your module by another module.
         * Please see the documentation of Request::Send() for further information. The Request sent
         * can always be assumed to be non-NULL, you should not change the request object or its data.
         * Your method may return arbitary data in the char* result which the requesting module
         * may be able to use for pre-determined purposes (e.g. the results of an SQL query, etc).
         * @param request The Request class being received
         */
        virtual char* OnRequest(Request* request);

        /** Called whenever an oper password is to be compared to what a user has input.
         * The password field (from the config file) is in 'password' and is to be compared against
         * 'input'. This method allows for encryption of oper passwords and much more besides.
         * You should return a nonzero value if you want to allow the comparison or zero if you wish
         * to do nothing.
         * @param password The oper's password
         * @param input The password entered
         * @return 1 to match the passwords, 0 to do nothing
         */
        virtual int OnOperCompare(std::string password, std::string input);

        /** Called whenever a user is given usermode +o, anywhere on the network.
         * You cannot override this and prevent it from happening as it is already happened and
         * such a task must be performed by another server. You can however bounce modes by sending
         * servermodes out to reverse mode changes.
         * @param user The user who is opering
         */
        virtual void OnGlobalOper(userrec* user);

        /**  Called whenever a user connects, anywhere on the network.
         * This event is informational only. You should not change any user information in this
         * event. To do so, use the OnUserConnect method to change the state of local users.
         * @param user The user who is connecting
         */
        virtual void OnGlobalConnect(userrec* user);

        /** Called whenever a ban is added to a channel's list.
         * Return a non-zero value to 'eat' the mode change and prevent the ban from being added.
         * @param source The user adding the ban
         * @param channel The channel the ban is being added to
         * @param banmask The ban mask being added
         * @return 1 to block the ban, 0 to continue as normal
         */
        virtual int OnAddBan(userrec* source, chanrec* channel,std::string banmask);

        /** Called whenever a ban is removed from a channel's list.
         * Return a non-zero value to 'eat' the mode change and prevent the ban from being removed.
         * @param source The user deleting the ban
         * @param channel The channel the ban is being deleted from
         * @param banmask The ban mask being deleted
         * @return 1 to block the unban, 0 to continue as normal
         */
        virtual int OnDelBan(userrec* source, chanrec* channel,std::string banmask);

        /** Called immediately after any  connection is accepted. This is intended for raw socket
         * processing (e.g. modules which wrap the tcp connection within another library) and provides
         * no information relating to a user record as the connection has not been assigned yet.
         * There are no return values from this call as all modules get an opportunity if required to
         * process the connection.
         * @param fd The file descriptor returned from accept()
         * @param ip The IP address of the connecting user
         * @param localport The local port number the user connected to
         */
        virtual void OnRawSocketAccept(int fd, std::string ip, int localport);

        /** Called immediately before any write() operation on a user's socket in the core. Because
         * this event is a low level event no user information is associated with it. It is intended
         * for use by modules which may wrap connections within another API such as SSL for example.
         * return a non-zero result if you have handled the write operation, in which case the core
         * will not call write().
         * @param fd The file descriptor of the socket
         * @param buffer A char* buffer being written
         * @param Number of characters to write
         * @return Number of characters actually written or 0 if you didn't handle the operation
         */
        virtual int OnRawSocketWrite(int fd, char* buffer, int count);

        /** Called immediately before any socket is closed. When this event is called, shutdown()
         * has not yet been called on the socket.
         * @param fd The file descriptor of the socket prior to close()
         */
        virtual void OnRawSocketClose(int fd);

        /** Called immediately before any read() operation on a client socket in the core.
         * This occurs AFTER the select() or poll() so there is always data waiting to be read
         * when this event occurs.
         * Your event should return 1 if it has handled the reading itself, which prevents the core
         * just using read(). You should place any data read into buffer, up to but NOT GREATER THAN
         * the value of count. The value of readresult must be identical to an actual result that might
         * be returned from the read() system call, for example, number of bytes read upon success,
         * 0 upon EOF or closed socket, and -1 for error. If your function returns a nonzero value,
         * you MUST set readresult.
         * @param fd The file descriptor of the socket
         * @param buffer A char* buffer being read to
         * @param count The size of the buffer
         * @param readresult The amount of characters read, or 0
         * @return nonzero if the event was handled, in which case readresult must be valid on exit
         */
        virtual int OnRawSocketRead(int fd, char* buffer, unsigned int count, int &readresult);

        virtual void OnSetAway(userrec* user);

        virtual void OnCancelAway(userrec* user);
};


/** Allows server output and query functions
 * This class contains methods which allow a module to query the state of the irc server, and produce
 * output to users and other servers. All modules should instantiate at least one copy of this class,
 * and use its member functions to perform their tasks.
 */
class Server : public classbase
{
 public:
        /** Default constructor.
         * Creates a Server object.
         */
        Server();

        /** Default destructor.
         * Destroys a Server object.
         */
        virtual ~Server();

        /** Obtains a pointer to the server's ServerConfig object.
         * The ServerConfig object contains most of the configuration data
         * of the IRC server, as read from the config file by the core.
         */
        ServerConfig* GetConfig();

        /** For use with Module::Prioritize().
         * When the return value of this function is returned from
         * Module::Prioritize(), this specifies that the module wishes
         * to be ordered exactly BEFORE 'modulename'. For more information
         * please see Module::Prioritize().
         * @param modulename The module your module wants to be before in the call list
         * @returns a priority ID which the core uses to relocate the module in the list
         */
        long PriorityBefore(std::string modulename);

        /** For use with Module::Prioritize().
         * When the return value of this function is returned from
         * Module::Prioritize(), this specifies that the module wishes
         * to be ordered exactly AFTER 'modulename'. For more information please
         * see Module::Prioritize().
         * @param modulename The module your module wants to be after in the call list
         * @returns a priority ID which the core uses to relocate the module in the list
         */
        long PriorityAfter(std::string modulename);
        
        /** Sends text to all opers.
         * This method sends a server notice to all opers with the usermode +s.
         */
        virtual void SendOpers(std::string s);

        /** Returns the version string of this server
         */
        std::string GetVersion();

        /** Writes a log string.
         * This method writes a line of text to the log. If the level given is lower than the
         * level given in the configuration, this command has no effect.
         */
        virtual void Log(int level, std::string s);

        /** Sends a line of text down a TCP/IP socket.
         * This method writes a line of text to an established socket, cutting it to 510 characters
         * plus a carriage return and linefeed if required.
         */
        virtual void Send(int Socket, std::string s);

        /** Sends text from the server to a socket.
         * This method writes a line of text to an established socket, with the servername prepended
         * as used by numerics (see RFC 1459)
         */
        virtual void SendServ(int Socket, std::string s);

        /** Writes text to a channel, but from a server, including all.
         * This can be used to send server notices to a group of users.
         */
        virtual void SendChannelServerNotice(std::string ServName, chanrec* Channel, std::string text);

        /** Sends text from a user to a socket.
         * This method writes a line of text to an established socket, with the given user's nick/ident
         * /host combination prepended, as used in PRIVSG etc commands (see RFC 1459)
         */
        virtual void SendFrom(int Socket, userrec* User, std::string s);

        /** Sends text from a user to another user.
         * This method writes a line of text to a user, with a user's nick/ident
         * /host combination prepended, as used in PRIVMSG etc commands (see RFC 1459)
         * If you specify NULL as the source, then the data will originate from the
         * local server, e.g. instead of:
         *
         * :user!ident@host TEXT
         *
         * The format will become:
         *
         * :localserver TEXT
         *
         * Which is useful for numerics and server notices to single users, etc.
         */
        virtual void SendTo(userrec* Source, userrec* Dest, std::string s);

        /** Sends text from a user to a channel (mulicast).
         * This method writes a line of text to a channel, with the given user's nick/ident
         * /host combination prepended, as used in PRIVMSG etc commands (see RFC 1459). If the
         * IncludeSender flag is set, then the text is also sent back to the user from which
         * it originated, as seen in MODE (see RFC 1459).
         */
        virtual void SendChannel(userrec* User, chanrec* Channel, std::string s,bool IncludeSender);

        /** Returns true if two users share a common channel.
         * This method is used internally by the NICK and QUIT commands, and the Server::SendCommon
         * method.
         */
        virtual bool CommonChannels(userrec* u1, userrec* u2);

        /** Sends text from a user to one or more channels (mulicast).
         * This method writes a line of text to all users which share a common channel with a given     
         * user, with the user's nick/ident/host combination prepended, as used in PRIVMSG etc
         * commands (see RFC 1459). If the IncludeSender flag is set, then the text is also sent
         * back to the user from which it originated, as seen in NICK (see RFC 1459). Otherwise, it
         * is only sent to the other recipients, as seen in QUIT.
         */
        virtual void SendCommon(userrec* User, std::string text,bool IncludeSender);

        /** Sends a WALLOPS message.
         * This method writes a WALLOPS message to all users with the +w flag, originating from the
         * specified user.
         */
        virtual void SendWallops(userrec* User, std::string text);

        /** Returns true if a nick is valid.
         * Nicks for unregistered connections will return false.
         */
        virtual bool IsNick(std::string nick);

        /** Returns a count of the number of users on a channel.
         * This will NEVER be 0, as if the chanrec exists, it will have at least one user in the channel.
         */
        virtual int CountUsers(chanrec* c);

        /** Attempts to look up a nick and return a pointer to it.
         * This function will return NULL if the nick does not exist.
         */
        virtual userrec* FindNick(std::string nick);

        /** Attempts to look up a nick using the file descriptor associated with that nick.
         * This function will return NULL if the file descriptor is not associated with a valid user.
         */
        virtual userrec* FindDescriptor(int socket);

        /** Attempts to look up a channel and return a pointer to it.
         * This function will return NULL if the channel does not exist.
         */
        virtual chanrec* FindChannel(std::string channel);

        /** Attempts to look up a user's privilages on a channel.
         * This function will return a string containing either @, %, +, or an empty string,
         * representing the user's privilages upon the channel you specify.
         */
        virtual std::string ChanMode(userrec* User, chanrec* Chan);

        /** Checks if a user is on a channel.
         * This function will return true or false to indicate if user 'User' is on channel 'Chan'.
         */
        virtual bool IsOnChannel(userrec* User, chanrec* Chan);

        /** Returns the server name of the server where the module is loaded.
         */
        virtual std::string GetServerName();

        /** Returns the network name, global to all linked servers.
         */
        virtual std::string GetNetworkName();

        /** Returns the server description string of the local server
         */
        virtual std::string GetServerDescription();

        /** Returns the information of the server as returned by the /ADMIN command.
         * See the Admin class for further information of the return value. The members
         * Admin::Nick, Admin::Email and Admin::Name contain the information for the
         * server where the module is loaded.
         */
        virtual Admin GetAdmin();

        /** Adds an extended mode letter which is parsed by a module.
         * This allows modules to add extra mode letters, e.g. +x for hostcloak.
         * the "type" parameter is either MT_CHANNEL, MT_CLIENT, or MT_SERVER, to
         * indicate wether the mode is a channel mode, a client mode, or a server mode.
         * requires_oper is used with MT_CLIENT type modes only to indicate the mode can only
         * be set or unset by an oper. If this is used for MT_CHANNEL type modes it is ignored.
         * params_when_on is the number of modes to expect when the mode is turned on
         * (for type MT_CHANNEL only), e.g. with mode +k, this would have a value of 1.
         * the params_when_off value has a similar value to params_when_on, except it indicates
         * the number of parameters to expect when the mode is disabled. Modes which act in a similar
         * way to channel mode +l (e.g. require a parameter to enable, but not to disable) should
         * use this parameter. The function returns false if the mode is unavailable, and will not
         * attempt to allocate another character, as this will confuse users. This also means that
         * as only one module can claim a specific mode character, the core does not need to keep track
         * of which modules own which modes, which speeds up operation of the server. In this version,
         * a mode can have at most one parameter, attempting to use more parameters will have undefined
         * effects.
         */
        virtual bool AddExtendedMode(char modechar, int type, bool requires_oper, int params_when_on, int params_when_off);

        /** Adds an extended mode letter which is parsed by a module and handled in a list fashion.
         * This call is used to implement modes like +q and +a. The characteristics of these modes are
         * as follows:
         *
         * (1) They are ALWAYS on channels, not on users, therefore their type is MT_CHANNEL
         *
         * (2) They always take exactly one parameter when being added or removed
         *
         * (3) They can be set multiple times, usually on users in channels
         *
         * (4) The mode and its parameter are NOT stored in the channels modes structure
         *
         * It is down to the module handling the mode to maintain state and determine what 'items' (e.g. users,
         * or a banlist) have the mode set on them, and process the modes at the correct times, e.g. during access
         * checks on channels, etc. When the extended mode is triggered the OnExtendedMode method will be triggered
         * as above. Note that the target you are given will be a channel, if for example your mode is set 'on a user'
         * (in for example +a) you must use Server::Find to locate the user the mode is operating on.
         * Your mode handler may return 1 to handle the mode AND tell the core to display the mode change, e.g.
         * '+aaa one two three' in the case of the mode for 'two', or it may return -1 to 'eat' the mode change,
         * so the above example would become '+aa one three' after processing.
         */
        virtual bool AddExtendedListMode(char modechar);

        /** Adds a command to the command table.
         * This allows modules to add extra commands into the command table. You must place a function within your
         * module which is is of type handlerfunc:
         * 
         * typedef void (handlerfunc) (char**, int, userrec*);
         * ...
         * void handle_kill(char **parameters, int pcnt, userrec *user)
         *
         * When the command is typed, the parameters will be placed into the parameters array (similar to argv) and
         * the parameter count will be placed into pcnt (similar to argv). There will never be any less parameters
         * than the 'minparams' value you specified when creating the command. The *user parameter is the class of
         * the user which caused the command to trigger, who will always have the flag you specified in 'flags' when
         * creating the initial command. For example to create an oper only command create the commands with flags='o'.
         * The source parameter is used for resource tracking, and should contain the name of your module (with file
         * extension) e.g. "m_blarp.so". If you place the wrong identifier here, you can cause crashes if your module
         * is unloaded.
         */
        virtual void AddCommand(command_t *f);
         
        /** Sends a servermode.
         * you must format the parameters array with the target, modes and parameters for those modes.
         *
         * For example:
         *
         * char *modes[3];
         *
         * modes[0] = ChannelName;
         *
         * modes[1] = "+o";
         *
         * modes[2] = user->nick;
         *
         * Srv->SendMode(modes,3,user);
         *
         * The modes will originate from the server where the command was issued, however responses (e.g. numerics)
         * will be sent to the user you provide as the third parameter.
         * You must be sure to get the number of parameters correct in the pcnt parameter otherwise you could leave
         * your server in an unstable state!
         */

        virtual void SendMode(char **parameters, int pcnt, userrec *user);
        
        /** Sends to all users matching a mode mask
         * You must specify one or more usermodes as the first parameter. These can be RFC specified modes such as +i,
         * or module provided modes, including ones provided by your own module.
         * In the second parameter you must place a flag value which indicates wether the modes you have given will be
         * logically ANDed or OR'ed. You may use one of either WM_AND or WM_OR.
         * for example, if you were to use:
         *
         * Serv->SendToModeMask("xi", WM_OR, "m00");
         *
         * Then the text 'm00' will be sent to all users with EITHER mode x or i. Conversely if you used WM_AND, the
         * user must have both modes set to receive the message.
         */
        virtual void SendToModeMask(std::string modes, int flags, std::string text);

        /** Forces a user to join a channel.
         * This is similar to svsjoin and can be used to implement redirection, etc.
         * On success, the return value is a valid pointer to a chanrec* of the channel the user was joined to.
         * On failure, the result is NULL.
         */
        virtual chanrec* JoinUserToChannel(userrec* user, std::string cname, std::string key);
        
        /** Forces a user to part a channel.
         * This is similar to svspart and can be used to implement redirection, etc.
         * Although the return value of this function is a pointer to a channel record, the returned data is
         * undefined and should not be read or written to. This behaviour may be changed in a future version.
         */
        virtual chanrec* PartUserFromChannel(userrec* user, std::string cname, std::string reason);
        
        /** Forces a user nickchange.
         * This command works similarly to SVSNICK, and can be used to implement Q-lines etc.
         * If you specify an invalid nickname, the nick change will be dropped and the target user will receive
         * the error numeric for it.
         */
        virtual void ChangeUserNick(userrec* user, std::string nickname);
        
        /** Forces a user to quit with the specified reason.
         * To the user, it will appear as if they typed /QUIT themselves, except for the fact that this function
         * may bypass the quit prefix specified in the config file.
         *
         * WARNING!
         *
         * Once you call this function, userrec* user will immediately become INVALID. You MUST NOT write to, or
         * read from this pointer after calling the QuitUser method UNDER ANY CIRCUMSTANCES! The best course of
         * action after calling this method is to immediately bail from your handler.
         */
        virtual void QuitUser(userrec* user, std::string reason);

        /** Makes a user kick another user, with the specified reason.
         * If source is NULL, the server will peform the kick.
         * @param The person or server (if NULL) performing the KICK
         * @param target The person being kicked
         * @param chan The channel to kick from
         * @param reason The kick reason
         */
        virtual void KickUser(userrec* source, userrec* target, chanrec* chan, std::string reason);
        
        /**  Matches text against a glob pattern.
         * Uses the ircd's internal matching function to match string against a globbing pattern, e.g. *!*@*.com
         * Returns true if the literal successfully matches the pattern, false if otherwise.
         */
        virtual bool MatchText(std::string sliteral, std::string spattern);
        
        /** Calls the handler for a command, either implemented by the core or by another module.
         * You can use this function to trigger other commands in the ircd, such as PRIVMSG, JOIN,
         * KICK etc, or even as a method of callback. By defining command names that are untypeable
         * for users on irc (e.g. those which contain a \r or \n) you may use them as callback identifiers.
         * The first parameter to this method is the name of the command handler you wish to call, e.g.
         * PRIVMSG. This will be a command handler previously registered by the core or wih AddCommand().
         * The second parameter is an array of parameters, and the third parameter is a count of parameters
         * in the array. If you do not pass enough parameters to meet the minimum needed by the handler, the
         * functiom will silently ignore it. The final parameter is the user executing the command handler,
         * used for privilage checks, etc.
         */
        virtual void CallCommandHandler(std::string commandname, char** parameters, int pcnt, userrec* user);

        /** This function returns true if the commandname exists, pcnt is equal to or greater than the number
         * of paramters the command requires, the user specified is allowed to execute the command, AND
         * if the command is implemented by a module (not the core). This has a few specific uses, usually
         * within network protocols (see src/modules/m_spanningtree.cpp)
         */
        virtual bool IsValidModuleCommand(std::string commandname, int pcnt, userrec* user);
        
        /** Change displayed hostname of a user.
         * You should always call this method to change a user's host rather than writing directly to the
         * dhost member of userrec, as any change applied via this method will be propogated to any
         * linked servers.
         */     
        virtual void ChangeHost(userrec* user, std::string host);
        
        /** Change GECOS (fullname) of a user.
         * You should always call this method to change a user's GECOS rather than writing directly to the
         * fullname member of userrec, as any change applied via this method will be propogated to any
         * linked servers.
         */     
        virtual void ChangeGECOS(userrec* user, std::string gecos);
        
        /** Returns true if the servername you give is ulined.
         * ULined servers have extra privilages. They are allowed to change nicknames on remote servers,
         * change modes of clients which are on remote servers and set modes of channels where there are
         * no channel operators for that channel on the ulined server, amongst other things.
         */
        virtual bool IsUlined(std::string server);
        
        /** Fetches the userlist of a channel. This function must be here and not a member of userrec or
         * chanrec due to include constraints.
         */
        virtual chanuserlist GetUsers(chanrec* chan);

        /** Remove a user's connection to the irc server, but leave their client in existence in the
         * user hash. When you call this function, the user's file descriptor will be replaced with the
         * value of FD_MAGIC_NUMBER and their old file descriptor will be closed. This idle client will
         * remain until it is restored with a valid file descriptor, or is removed from IRC by an operator
         * After this call, the pointer to user will be invalid.
         */
        virtual bool UserToPseudo(userrec* user,std::string message);

        /** This user takes one user, and switches their file descriptor with another user, so that one user
         * "becomes" the other. The user in 'alive' is booted off the server with the given message. The user
         * referred to by 'zombie' should have previously been locked with Server::UserToPseudo, otherwise
         * stale sockets and file descriptor leaks can occur. After this call, the pointer to alive will be
         * invalid, and the pointer to zombie will be equivalent in effect to the old pointer to alive.
         */
        virtual bool PseudoToUser(userrec* alive,userrec* zombie,std::string message);

        /** Adds a G-line
         * The G-line is propogated to all of the servers in the mesh and enforced as soon as it is added.
         * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
         * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
         * to indicate who or what sent the data, usually this is the nickname of a person, or a server
         * name.
         */
        virtual void AddGLine(long duration, std::string source, std::string reason, std::string hostmask);

        /** Adds a Q-line
         * The Q-line is propogated to all of the servers in the mesh and enforced as soon as it is added.
         * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
         * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
         * to indicate who or what sent the data, usually this is the nickname of a person, or a server
         * name.
         */
        virtual void AddQLine(long duration, std::string source, std::string reason, std::string nickname);

        /** Adds a Z-line
         * The Z-line is propogated to all of the servers in the mesh and enforced as soon as it is added.
         * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
         * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
         * to indicate who or what sent the data, usually this is the nickname of a person, or a server
         * name.
         */
        virtual void AddZLine(long duration, std::string source, std::string reason, std::string ipaddr);

        /** Adds a K-line
         * The K-line is enforced as soon as it is added.
         * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
         * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
         * to indicate who or what sent the data, usually this is the nickname of a person, or a server
         * name.
         */
        virtual void AddKLine(long duration, std::string source, std::string reason, std::string hostmask);

        /** Adds a E-line
         * The E-line is enforced as soon as it is added.
         * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
         * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
         * to indicate who or what sent the data, usually this is the nickname of a person, or a server
         * name.
         */
        virtual void AddELine(long duration, std::string source, std::string reason, std::string hostmask);

        /** Deletes a G-Line from all servers
         */
        virtual bool DelGLine(std::string hostmask);

        /** Deletes a Q-Line from all servers
         */
        virtual bool DelQLine(std::string nickname);

        /** Deletes a Z-Line from all servers
         */
        virtual bool DelZLine(std::string ipaddr);

        /** Deletes a local K-Line
         */
        virtual bool DelKLine(std::string hostmask);

        /** Deletes a local E-Line
         */
        virtual bool DelELine(std::string hostmask);

        /** Calculates a duration
         * This method will take a string containing a formatted duration (e.g. "1w2d") and return its value
         * as a total number of seconds. This is the same function used internally by /GLINE etc to set
         * the ban times.
         */
        virtual long CalcDuration(std::string duration);

        /** Returns true if a nick!ident@host string is correctly formatted, false if otherwise.
         */
        virtual bool IsValidMask(std::string mask);

        /** This function finds a module by name.
         * You must provide the filename of the module. If the module cannot be found (is not loaded)
         * the function will return NULL.
         */
        virtual Module* FindModule(std::string name);

        /** Adds a class derived from InspSocket to the server's socket engine.
         */
        virtual void AddSocket(InspSocket* sock);

        /** Forcibly removes a class derived from InspSocket from the servers socket engine.
         */
        virtual void RemoveSocket(InspSocket* sock);

        /** Deletes a class derived from InspSocket from the server's socket engine.
         */
        virtual void DelSocket(InspSocket* sock);

        virtual void RehashServer();
};


#define CONF_NOT_A_NUMBER       0x000010
#define CONF_NOT_UNSIGNED       0x000080
#define CONF_VALUE_NOT_FOUND    0x000100
#define CONF_FILE_NOT_FOUND     0x000200


/** Allows reading of values from configuration files
 * This class allows a module to read from either the main configuration file (inspircd.conf) or from
 * a module-specified configuration file. It may either be instantiated with one parameter or none.
 * Constructing the class using one parameter allows you to specify a path to your own configuration
 * file, otherwise, inspircd.conf is read.
 */
class ConfigReader : public classbase
{
  protected:
        /** The contents of the configuration file
         * This protected member should never be accessed by a module (and cannot be accessed unless the
         * core is changed). It will contain a pointer to the configuration file data with unneeded data
         * (such as comments) stripped from it.
         */
        std::stringstream *cache;
        std::stringstream *errorlog;
        /** Used to store errors
         */
        bool readerror;
        long error;
        
  public:
        /** Default constructor.
         * This constructor initialises the ConfigReader class to read the inspircd.conf file
         * as specified when running ./configure.
         */
        ConfigReader();                 // default constructor reads ircd.conf
        /** Overloaded constructor.
         * This constructor initialises the ConfigReader class to read a user-specified config file
         */
        ConfigReader(std::string filename);     // read a module-specific config
        /** Default destructor.
         * This method destroys the ConfigReader class.
         */
        ~ConfigReader();
        /** Retrieves a value from the config file.
         * This method retrieves a value from the config file. Where multiple copies of the tag
         * exist in the config file, index indicates which of the values to retrieve.
         */
        std::string ReadValue(std::string tag, std::string name, int index);
        /** Retrieves a boolean value from the config file.
         * This method retrieves a boolean value from the config file. Where multiple copies of the tag
         * exist in the config file, index indicates which of the values to retrieve. The values "1", "yes"
         * and "true" in the config file count as true to ReadFlag, and any other value counts as false.
         */
        bool ReadFlag(std::string tag, std::string name, int index);
        /** Retrieves an integer value from the config file.
         * This method retrieves an integer value from the config file. Where multiple copies of the tag
         * exist in the config file, index indicates which of the values to retrieve. Any invalid integer
         * values in the tag will cause the objects error value to be set, and any call to GetError() will
         * return CONF_INVALID_NUMBER to be returned. needs_unsigned is set if the number must be unsigned.
         * If a signed number is placed into a tag which is specified unsigned, 0 will be returned and GetError()
         * will return CONF_NOT_UNSIGNED
         */
        long ReadInteger(std::string tag, std::string name, int index, bool needs_unsigned);
        /** Returns the last error to occur.
         * Valid errors can be found by looking in modules.h. Any nonzero value indicates an error condition.
         * A call to GetError() resets the error flag back to 0.
         */
        long GetError();
        /** Counts the number of times a given tag appears in the config file.
         * This method counts the number of times a tag appears in a config file, for use where
         * there are several tags of the same kind, e.g. with opers and connect types. It can be
         * used with the index value of ConfigReader::ReadValue to loop through all copies of a
         * multiple instance tag.
         */
        int Enumerate(std::string tag);
        /** Returns true if a config file is valid.
         * This method is partially implemented and will only return false if the config
         * file does not exist or could not be opened.
         */
        bool Verify();
        /** Dumps the list of errors in a config file to an output location. If bail is true,
         * then the program will abort. If bail is false and user points to a valid user
         * record, the error report will be spooled to the given user by means of NOTICE.
         * if bool is false AND user is false, the error report will be spooled to all opers
         * by means of a NOTICE to all opers.
         */
        void DumpErrors(bool bail,userrec* user);

        /** Returns the number of items within a tag.
         * For example if the tag was &lt;test tag="blah" data="foo"&gt; then this
         * function would return 2. Spaces and newlines both qualify as valid seperators
         * between values.
         */
        int EnumerateValues(std::string tag, int index);
};



/** Caches a text file into memory and can be used to retrieve lines from it.
 * This class contains methods for read-only manipulation of a text file in memory.
 * Either use the constructor type with one parameter to load a file into memory
 * at construction, or use the LoadFile method to load a file.
 */
class FileReader : public classbase
{
 file_cache fc;
 public:
         /** Default constructor.
          * This method does not load any file into memory, you must use the LoadFile method
          * after constructing the class this way.
          */
         FileReader();

         /** Secondary constructor.
          * This method initialises the class with a file loaded into it ready for GetLine and
          * and other methods to be called. If the file could not be loaded, FileReader::FileSize
          * returns 0.
          */
         FileReader(std::string filename);

         /** Default destructor.
          * This deletes the memory allocated to the file.
          */
         ~FileReader();

         /** Used to load a file.
          * This method loads a file into the class ready for GetLine and
          * and other methods to be called. If the file could not be loaded, FileReader::FileSize
          * returns 0.
          */
         void LoadFile(std::string filename);

         /** Returns true if the file exists
          * This function will return false if the file could not be opened.
          */
         bool Exists();
         
         /** Retrieve one line from the file.
          * This method retrieves one line from the text file. If an empty non-NULL string is returned,
          * the index was out of bounds, or the line had no data on it.
          */
         std::string GetLine(int x);

         /** Returns the size of the file in lines.
          * This method returns the number of lines in the read file. If it is 0, no lines have been
          * read into memory, either because the file is empty or it does not exist, or cannot be
          * opened due to permission problems.
          */
         int FileSize();
};


/** Instantiates classes inherited from Module
 * This class creates a class inherited from type Module, using new. This is to allow for modules
 * to create many different variants of Module, dependent on architecture, configuration, etc.
 * In most cases, the simple class shown in the example module m_foobar.so will suffice for most
 * modules.
 */
class ModuleFactory : public classbase
{
 public:
        ModuleFactory() { }
        virtual ~ModuleFactory() { }
        /** Creates a new module.
         * Your inherited class of ModuleFactory must return a pointer to your Module class
         * using this method.
         */
        virtual Module * CreateModule(Server* Me) = 0;
};


typedef DLLFactory<ModuleFactory> ircd_module;

bool ModeDefined(char c, int i);
bool ModeDefinedOper(char c, int i);
int ModeDefinedOn(char c, int i);
int ModeDefinedOff(char c, int i);
void ModeMakeList(char modechar);
bool ModeIsListMode(char modechar, int type);

#endif