1 /* +------------------------------------+
2 * | Inspire Internet Relay Chat Daemon |
3 * +------------------------------------+
5 * Inspire is copyright (C) 2002-2004 ChatSpike-Dev.
7 * <brain@chatspike.net>
8 * <Craig@chatspike.net>
10 * Written by Craig Edwards, Craig McLure, and others.
11 * This program is free but copyrighted software; see
12 * the file COPYING for details.
14 * ---------------------------------------------------
29 // used with OnExtendedMode() method of modules
35 // used with OnAccessCheck() method of modules
37 #define ACR_DEFAULT 0 // Do default action (act as if the module isnt even loaded)
38 #define ACR_DENY 1 // deny the action
39 #define ACR_ALLOW 2 // allow the action
41 #define AC_KICK 0 // a user is being kicked
42 #define AC_DEOP 1 // a user is being deopped
43 #define AC_OP 2 // a user is being opped
44 #define AC_VOICE 3 // a user is being voiced
45 #define AC_DEVOICE 4 // a user is being devoiced
46 #define AC_HALFOP 5 // a user is being halfopped
47 #define AC_DEHALFOP 6 // a user is being dehalfopped
48 #define AC_INVITE 7 // a user is being invited
49 #define AC_GENERAL_MODE 8 // a user channel mode is being changed
51 // used to define a set of behavior bits for a module
53 #define VF_STATIC 1 // module is static, cannot be /unloadmodule'd
54 #define VF_VENDOR 2 // module is a vendor module (came in the original tarball, not 3rd party)
55 #define VF_SERVICEPROVIDER 4 // module provides a service to other modules (can be a dependency)
56 #define VF_COMMON 8 // module needs to be common on all servers in a mesh to link
66 /** Low level definition of a FileReader classes file cache area
68 typedef std::deque<std::string> file_cache;
69 typedef file_cache string_list;
71 /** Holds a list of users in a channel
73 typedef std::deque<userrec*> chanuserlist;
76 // This #define allows us to call a method in all
77 // loaded modules in a readable simple way, e.g.:
78 // 'FOREACH_MOD OnConnect(user);'
80 #define FOREACH_MOD for (int _i = 0; _i <= MODCOUNT; _i++) modules[_i]->
82 // This define is similar to the one above but returns a result in MOD_RESULT.
83 // The first module to return a nonzero result is the value to be accepted,
84 // and any modules after are ignored.
86 // *********************************************************************************************
88 #define FOREACH_RESULT(x) { MOD_RESULT = 0; \
89 for (int _i = 0; _i <= MODCOUNT; _i++) { \
90 int res = modules[_i]->x ; \
98 // *********************************************************************************************
100 #define FD_MAGIC_NUMBER -42
102 extern void createcommand(char* cmd, handlerfunc f, char flags, int minparams, char* source);
103 extern void server_mode(char **parameters, int pcnt, userrec *user);
105 // class Version holds the version information of a Module, returned
106 // by Module::GetVersion (thanks RD)
108 /** Holds a module's Version information
109 * The four members (set by the constructor only) indicate details as to the version number
110 * of a module. A class of type Version is returned by the GetVersion method of the Module class.
112 class Version : public classbase
115 const int Major, Minor, Revision, Build, Flags;
116 Version(int major, int minor, int revision, int build, int flags);
119 /** Holds /ADMIN data
120 * This class contains the admin details of the local server. It is constructed by class Server,
121 * and has three read-only values, Name, Email and Nick that contain the specified values for the
122 * server where the module is running.
124 class Admin : public classbase
127 const std::string Name, Email, Nick;
128 Admin(std::string name, std::string email, std::string nick);
132 // Forward-delacare module for ModuleMessage etc
135 // Thanks to Rob (from anope) for the idea of this message passing API
136 // (its been done before, but this seemed a very neat and tidy way...
138 /** The ModuleMessage class is the base class of Request and Event
139 * This class is used to represent a basic data structure which is passed
140 * between modules for safe inter-module communications.
142 class ModuleMessage : public classbase
145 /** This class is pure virtual and must be inherited.
147 virtual char* Send() = 0;
148 virtual ~ModuleMessage() {};
151 /** The Request class is a unicast message directed at a given module.
152 * When this class is properly instantiated it may be sent to a module
153 * using the Send() method, which will call the given module's OnRequest
154 * method with this class as its parameter.
156 class Request : public ModuleMessage
159 /** This member holds a pointer to arbitary data set by the emitter of the message
162 /** This is a pointer to the sender of the message, which can be used to
163 * directly trigger events, or to create a reply.
166 /** The single destination of the Request
170 /** Create a new Request
172 Request(char* anydata, Module* src, Module* dst);
173 /** Fetch the Request data
176 /** Fetch the request source
179 /** Fetch the request destination (should be 'this' in the receiving module)
182 /** Send the Request.
183 * Upon returning the result will be arbitary data returned by the module you
184 * sent the request to. It is up to your module to know what this data is and
185 * how to deal with it.
191 /** The Event class is a unicast message directed at all modules.
192 * When the class is properly instantiated it may be sent to all modules
193 * using the Send() method, which will trigger the OnEvent method in
194 * all modules passing the object as its parameter.
196 class Event : public ModuleMessage
199 /** This member holds a pointer to arbitary data set by the emitter of the message
202 /** This is a pointer to the sender of the message, which can be used to
203 * directly trigger events, or to create a reply.
206 /** The event identifier.
207 * This is arbitary text which should be used to distinguish
208 * one type of event from another.
212 /** Create a new Event
214 Event(char* anydata, Module* src, std::string eventid);
215 /** Get the Event data
218 /** Get the event Source
221 /** Get the event ID.
222 * Use this to determine the event type for safe casting of the data
224 std::string GetEventID();
226 * The return result of an Event::Send() will always be NULL as
227 * no replies are expected.
233 /** Base class for all InspIRCd modules
234 * This class is the base class for InspIRCd modules. All modules must inherit from this class,
235 * its methods will be called when irc server events occur. class inherited from module must be
236 * instantiated by the ModuleFactory class (see relevent section) for the plugin to be initialised.
238 class Module : public classbase
242 /** Default constructor
243 * creates a module class
247 /** Default destructor
248 * destroys a module class
252 /** Returns the version number of a Module.
253 * The method should return a Version object with its version information assigned via
256 virtual Version GetVersion();
258 /** Called when a user connects.
259 * The details of the connecting user are available to you in the parameter userrec *user
261 virtual void OnUserConnect(userrec* user);
263 /** Called when a user quits.
264 * The details of the exiting user are available to you in the parameter userrec *user
265 * This event is only called when the user is fully registered when they quit. To catch
266 * raw disconnections, use the OnUserDisconnect method.
268 virtual void OnUserQuit(userrec* user, std::string message);
270 /** Called whenever a user's socket is closed.
271 * The details of the exiting user are available to you in the parameter userrec *user
272 * This event is called for all users, registered or not, as a cleanup method for modules
273 * which might assign resources to user, such as dns lookups, objects and sockets.
275 virtual void OnUserDisconnect(userrec* user);
277 /** Called when a user joins a channel.
278 * The details of the joining user are available to you in the parameter userrec *user,
279 * and the details of the channel they have joined is available in the variable chanrec *channel
281 virtual void OnUserJoin(userrec* user, chanrec* channel);
283 /** Called when a user parts a channel.
284 * The details of the leaving user are available to you in the parameter userrec *user,
285 * and the details of the channel they have left is available in the variable chanrec *channel
287 virtual void OnUserPart(userrec* user, chanrec* channel);
289 /** Called before a packet is transmitted across the irc network between two irc servers.
290 * This allows you to easily represent it in the correct ways to implement encryption, compression,
291 * digital signatures and anything else you may want to add. This should be regarded as a pre-processor
292 * and will be called before ANY other operations within the ircd core program.
294 virtual void OnPacketTransmit(std::string &data, std::string serv);
296 /** Called after a packet is received from another irc server.
297 * This allows you to easily represent it in the correct ways to implement encryption, compression,
298 * digital signatures and anything else you may want to add. This should be regarded as a pre-processor
299 * and will be called immediately after the packet is received but before any other operations with the
302 virtual void OnPacketReceive(std::string &data, std::string serv);
304 /** Called on rehash.
305 * This method is called prior to a /REHASH or when a SIGHUP is received from the operating
306 * system. You should use it to reload any files so that your module keeps in step with the
307 * rest of the application. If a parameter is given, the core has done nothing. The module
308 * receiving the event can decide if this parameter has any relevence to it.
310 virtual void OnRehash(std::string parameter);
312 /** Called when a raw command is transmitted or received.
313 * This method is the lowest level of handler available to a module. It will be called with raw
314 * data which is passing through a connected socket. If you wish, you may munge this data by changing
315 * the string parameter "raw". If you do this, after your function exits it will immediately be
316 * cut down to 510 characters plus a carriage return and linefeed. For INBOUND messages only (where
317 * inbound is set to true) the value of user will be the userrec of the connection sending the
318 * data. This is not possible for outbound data because the data may be being routed to multiple targets.
320 virtual void OnServerRaw(std::string &raw, bool inbound, userrec* user);
322 /** Called whenever an extended mode is to be processed.
323 * The type parameter is MT_SERVER, MT_CLIENT or MT_CHANNEL, dependent on where the mode is being
324 * changed. mode_on is set when the mode is being set, in which case params contains a list of
325 * parameters for the mode as strings. If mode_on is false, the mode is being removed, and parameters
326 * may contain the parameters for the mode, dependent on wether they were defined when a mode handler
327 * was set up with Server::AddExtendedMode
328 * If the mode is a channel mode, target is a chanrec*, and if it is a user mode, target is a userrec*.
329 * You must cast this value yourself to make use of it.
331 virtual int OnExtendedMode(userrec* user, void* target, char modechar, int type, bool mode_on, string_list ¶ms);
333 /** Called whenever a user is about to join a channel, before any processing is done.
334 * Returning a value of 1 from this function stops the process immediately, causing no
335 * output to be sent to the user by the core. If you do this you must produce your own numerics,
336 * notices etc. This is useful for modules which may want to mimic +b, +k, +l etc. Returning -1 from
337 * this function forces the join to be allowed, bypassing restrictions such as banlists, invite, keys etc.
341 * If the user joins a NEW channel which does not exist yet, OnUserPreJoin will be called BEFORE the channel
342 * record is created. This will cause chanrec* chan to be NULL. There is very little you can do in form of
343 * processing on the actual channel record at this point, however the channel NAME will still be passed in
344 * char* cname, so that you could for example implement a channel blacklist or whitelist, etc.
346 virtual int OnUserPreJoin(userrec* user, chanrec* chan, const char* cname);
348 /** Called whenever a user is about to be kicked.
349 * Returning a value of 1 from this function stops the process immediately, causing no
350 * output to be sent to the user by the core. If you do this you must produce your own numerics,
353 virtual int OnUserPreKick(userrec* source, userrec* user, chanrec* chan, std::string reason);
355 /** Called whenever a user is kicked.
356 * If this method is called, the kick is already underway and cannot be prevented, so
357 * to prevent a kick, please use Module::OnUserPreKick instead of this method.
359 virtual void OnUserKick(userrec* source, userrec* user, chanrec* chan, std::string reason);
361 /** Called whenever a user opers locally.
362 * The userrec will contain the oper mode 'o' as this function is called after any modifications
363 * are made to the user's structure by the core.
365 virtual void OnOper(userrec* user, std::string opertype);
367 /** Called whenever a user types /INFO.
368 * The userrec will contain the information of the user who typed the command. Modules may use this
369 * method to output their own credits in /INFO (which is the ircd's version of an about box).
370 * It is purposefully not possible to modify any info that has already been output, or halt the list.
371 * You must write a 371 numeric to the user, containing your info in the following format:
373 * <nick> :information here
375 virtual void OnInfo(userrec* user);
377 /** Called whenever a /WHOIS is performed on a local user.
378 * The source parameter contains the details of the user who issued the WHOIS command, and
379 * the dest parameter contains the information of the user they are whoising.
381 virtual void OnWhois(userrec* source, userrec* dest);
383 /** Called whenever a user is about to invite another user into a channel, before any processing is done.
384 * Returning 1 from this function stops the process immediately, causing no
385 * output to be sent to the user by the core. If you do this you must produce your own numerics,
386 * notices etc. This is useful for modules which may want to filter invites to channels.
388 virtual int OnUserPreInvite(userrec* source,userrec* dest,chanrec* channel);
390 virtual void OnUserInvite(userrec* source,userrec* dest,chanrec* channel);
392 /** Called whenever a user is about to PRIVMSG A user or a channel, before any processing is done.
393 * Returning any nonzero value from this function stops the process immediately, causing no
394 * output to be sent to the user by the core. If you do this you must produce your own numerics,
395 * notices etc. This is useful for modules which may want to filter or redirect messages.
396 * target_type can be one of TYPE_USER or TYPE_CHANNEL. If the target_type value is a user,
397 * you must cast dest to a userrec* otherwise you must cast it to a chanrec*, this is the details
398 * of where the message is destined to be sent.
400 virtual int OnUserPreMessage(userrec* user,void* dest,int target_type, std::string &text);
402 /** Called whenever a user is about to NOTICE A user or a channel, before any processing is done.
403 * Returning any nonzero value from this function stops the process immediately, causing no
404 * output to be sent to the user by the core. If you do this you must produce your own numerics,
405 * notices etc. This is useful for modules which may want to filter or redirect messages.
406 * target_type can be one of TYPE_USER or TYPE_CHANNEL. If the target_type value is a user,
407 * you must cast dest to a userrec* otherwise you must cast it to a chanrec*, this is the details
408 * of where the message is destined to be sent.
409 * You may alter the message text as you wish before relinquishing control to the next module
410 * in the chain, and if no other modules block the text this altered form of the text will be sent out
411 * to the user and possibly to other servers.
413 virtual int OnUserPreNotice(userrec* user,void* dest,int target_type, std::string &text);
415 /** Called before any nickchange, local or remote. This can be used to implement Q-lines etc.
416 * Please note that although you can see remote nickchanges through this function, you should
417 * NOT make any changes to the userrec if the user is a remote user as this may cause a desnyc.
418 * check user->server before taking any action (including returning nonzero from the method).
419 * If your method returns nonzero, the nickchange is silently forbidden, and it is down to your
420 * module to generate some meaninful output.
422 virtual int OnUserPreNick(userrec* user, std::string newnick);
424 virtual void OnUserMessage(userrec* user, void* dest, int target_type, std::string text);
426 virtual void OnUserNotice(userrec* user, void* dest, int target_type, std::string text);
428 virtual void OnMode(userrec* user, void* dest, int target_type, std::string text);
430 virtual void OnGetServerDescription(std::string servername,std::string &description);
432 virtual void OnSyncUser(userrec* user, Module* proto, void* opaque);
434 virtual void OnSyncChannel(chanrec* chan, Module* proto, void* opaque);
436 virtual void ProtoSendMode(void* opaque, int target_type, void* target, std::string modeline);
438 virtual void OnWallops(userrec* user, std::string text);
440 virtual void OnChangeHost(userrec* user, std::string newhost);
442 virtual void OnChangeName(userrec* user, std::string gecos);
444 virtual void OnAddGLine(long duration, userrec* source, std::string reason, std::string hostmask);
446 virtual void OnAddZLine(long duration, userrec* source, std::string reason, std::string ipmask);
448 virtual void OnAddKLine(long duration, userrec* source, std::string reason, std::string hostmask);
450 virtual void OnAddQLine(long duration, userrec* source, std::string reason, std::string nickmask);
452 virtual void OnAddELine(long duration, userrec* source, std::string reason, std::string hostmask);
454 virtual void OnDelGLine(userrec* source, std::string hostmask);
456 virtual void OnDelZLine(userrec* source, std::string ipmask);
458 virtual void OnDelKLine(userrec* source, std::string hostmask);
460 virtual void OnDelQLine(userrec* source, std::string nickmask);
462 virtual void OnDelELine(userrec* source, std::string hostmask);
464 /** Called after any nickchange, local or remote. This can be used to track users after nickchanges
465 * have been applied. Please note that although you can see remote nickchanges through this function, you should
466 * NOT make any changes to the userrec if the user is a remote user as this may cause a desnyc.
467 * check user->server before taking any action (including returning nonzero from the method).
468 * Because this method is called after the nickchange is taken place, no return values are possible
469 * to indicate forbidding of the nick change. Use OnUserPreNick for this.
471 virtual void OnUserPostNick(userrec* user, std::string oldnick);
473 /** Called before an action which requires a channel privilage check.
474 * This function is called before many functions which check a users status on a channel, for example
475 * before opping a user, deopping a user, kicking a user, etc.
476 * There are several values for access_type which indicate for what reason access is being checked.
478 * AC_KICK (0) - A user is being kicked<br>
479 * AC_DEOP (1) - a user is being deopped<br>
480 * AC_OP (2) - a user is being opped<br>
481 * AC_VOICE (3) - a user is being voiced<br>
482 * AC_DEVOICE (4) - a user is being devoiced<br>
483 * AC_HALFOP (5) - a user is being halfopped<br>
484 * AC_DEHALFOP (6) - a user is being dehalfopped<br>
485 * AC_INVITE (7) - a user is being invited<br>
486 * AC_GENERAL_MODE (8) - a user channel mode is being changed<br><br>
487 * Upon returning from your function you must return either ACR_DEFAULT, to indicate the module wishes
488 * to do nothing, or ACR_DENY where approprate to deny the action, and ACR_ALLOW where appropriate to allow
489 * the action. Please note that in the case of some access checks (such as AC_GENERAL_MODE) access may be
490 * denied 'upstream' causing other checks such as AC_DEOP to not be reached. Be very careful with use of the
491 * AC_GENERAL_MODE type, as it may inadvertently override the behaviour of other modules. When the access_type
492 * is AC_GENERAL_MODE, the destination of the mode will be NULL (as it has not yet been determined).
494 virtual int OnAccessCheck(userrec* source,userrec* dest,chanrec* channel,int access_type);
496 /** Called when a 005 numeric is about to be output.
497 * The module should modify the 005 numeric if needed to indicate its features.
499 virtual void On005Numeric(std::string &output);
501 /** Called when a client is disconnected by KILL.
502 * If a client is killed by a server, e.g. a nickname collision or protocol error,
504 * Return 1 from this function to prevent the kill, and 0 from this function to allow
505 * it as normal. If you prevent the kill no output will be sent to the client, it is
506 * down to your module to generate this information.
507 * NOTE: It is NOT advisable to stop kills which originate from servers. If you do
508 * so youre risking race conditions, desyncs and worse!
510 virtual int OnKill(userrec* source, userrec* dest, std::string reason);
512 /** Called when an oper wants to disconnect a remote user via KILL
514 virtual void OnRemoteKill(userrec* source, userrec* dest, std::string reason);
516 /** Called whenever a module is loaded.
517 * mod will contain a pointer to the module, and string will contain its name,
518 * for example m_widgets.so. This function is primary for dependency checking,
519 * your module may decide to enable some extra features if it sees that you have
520 * for example loaded "m_killwidgets.so" with "m_makewidgets.so". It is highly
521 * recommended that modules do *NOT* bail if they cannot satisfy dependencies,
522 * but instead operate under reduced functionality, unless the dependency is
523 * absolutely neccessary (e.g. a module that extends the features of another
526 virtual void OnLoadModule(Module* mod,std::string name);
528 /** Called whenever a module is unloaded.
529 * mod will contain a pointer to the module, and string will contain its name,
530 * for example m_widgets.so. This function is primary for dependency checking,
531 * your module may decide to enable some extra features if it sees that you have
532 * for example loaded "m_killwidgets.so" with "m_makewidgets.so". It is highly
533 * recommended that modules do *NOT* bail if they cannot satisfy dependencies,
534 * but instead operate under reduced functionality, unless the dependency is
535 * absolutely neccessary (e.g. a module that extends the features of another
538 virtual void OnUnloadModule(Module* mod,std::string name);
540 /** Called once every five seconds for background processing.
541 * This timer can be used to control timed features. Its period is not accurate
542 * enough to be used as a clock, but it is gauranteed to be called at least once in
543 * any five second period, directly from the main loop of the server.
545 virtual void OnBackgroundTimer(time_t curtime);
547 /** Called whenever a list is needed for a listmode.
548 * For example, when a /MODE #channel +b (without any other parameters) is called,
549 * if a module was handling +b this function would be called. The function can then
550 * output any lists it wishes to. Please note that all modules will see all mode
551 * characters to provide the ability to extend each other, so please only output
552 * a list if the mode character given matches the one(s) you want to handle.
554 virtual void OnSendList(userrec* user, chanrec* channel, char mode);
556 /** Called whenever any command is about to be executed.
557 * This event occurs for all registered commands, wether they are registered in the core,
558 * or another module, but it will not occur for invalid commands (e.g. ones which do not
559 * exist within the command table). By returning 1 from this method you may prevent the
560 * command being executed. If you do this, no output is created by the core, and it is
561 * down to your module to produce any output neccessary.
562 * Note that unless you return 1, you should not destroy any structures (e.g. by using
563 * Server::QuitUser) otherwise when the command's handler function executes after your
564 * method returns, it will be passed an invalid pointer to the user object and crash!)
566 virtual int OnPreCommand(std::string command, char **parameters, int pcnt, userrec *user);
568 /** Called to check if a user who is connecting can now be allowed to register
569 * If any modules return false for this function, the user is held in the waiting
570 * state until all modules return true. For example a module which implements ident
571 * lookups will continue to return false for a user until their ident lookup is completed.
572 * Note that the registration timeout for a user overrides these checks, if the registration
573 * timeout is reached, the user is disconnected even if modules report that the user is
574 * not ready to connect.
576 virtual bool OnCheckReady(userrec* user);
578 /** Called whenever a user is about to register their connection (e.g. before the user
579 * is sent the MOTD etc). Modules can use this method if they are performing a function
580 * which must be done before the actual connection is completed (e.g. ident lookups,
581 * dnsbl lookups, etc).
582 * Note that you should NOT delete the user record here by causing a disconnection!
583 * Use OnUserConnect for that instead.
585 virtual void OnUserRegister(userrec* user);
587 /** Called whenever a mode character is processed.
588 * Return 1 from this function to block the mode character from being processed entirely,
589 * so that you may perform your own code instead. Note that this method allows you to override
590 * modes defined by other modes, but this is NOT RECOMMENDED!
592 virtual int OnRawMode(userrec* user, chanrec* chan, char mode, std::string param, bool adding, int pcnt);
594 /** Called whenever a user joins a channel, to determine if invite checks should go ahead or not.
595 * This method will always be called for each join, wether or not the channel is actually +i, and
596 * determines the outcome of an if statement around the whole section of invite checking code.
597 * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
599 virtual int OnCheckInvite(userrec* user, chanrec* chan);
601 /** Called whenever a user joins a channel, to determine if key checks should go ahead or not.
602 * This method will always be called for each join, wether or not the channel is actually +k, and
603 * determines the outcome of an if statement around the whole section of key checking code.
604 * if the user specified no key, the keygiven string will be a valid but empty value.
605 * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
607 virtual int OnCheckKey(userrec* user, chanrec* chan, std::string keygiven);
609 /** Called whenever a user joins a channel, to determine if channel limit checks should go ahead or not.
610 * This method will always be called for each join, wether or not the channel is actually +l, and
611 * determines the outcome of an if statement around the whole section of channel limit checking code.
612 * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
614 virtual int OnCheckLimit(userrec* user, chanrec* chan);
616 /** Called whenever a user joins a channel, to determine if banlist checks should go ahead or not.
617 * This method will always be called for each join, wether or not the user actually matches a channel ban, and
618 * determines the outcome of an if statement around the whole section of ban checking code.
619 * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
621 virtual int OnCheckBan(userrec* user, chanrec* chan);
623 /** Called on all /STATS commands
624 * This method is triggered for all /STATS use, including stats symbols handled by the core.
626 virtual void OnStats(char symbol);
628 /** Called whenever a change of a local users displayed host is attempted.
629 * Return 1 to deny the host change, or 0 to allow it.
631 virtual int OnChangeLocalUserHost(userrec* user, std::string newhost);
633 /** Called whenever a change of a local users GECOS (fullname field) is attempted.
634 * return 1 to deny the name change, or 0 to allow it.
636 virtual int OnChangeLocalUserGECOS(userrec* user, std::string newhost);
638 /** Called whenever a topic is changed by a local user.
639 * Return 1 to deny the topic change, or 0 to allow it.
641 virtual int OnLocalTopicChange(userrec* user, chanrec* chan, std::string topic);
643 virtual void OnPostLocalTopicChange(userrec* user, chanrec* chan, std::string topic);
645 /** Called whenever an Event class is sent to all module by another module.
646 * Please see the documentation of Event::Send() for further information. The Event sent can
647 * always be assumed to be non-NULL, you should *always* check the value of Event::GetEventID()
648 * before doing anything to the event data, and you should *not* change the event data in any way!
650 virtual void OnEvent(Event* event);
652 /** Called whenever a Request class is sent to your module by another module.
653 * Please see the documentation of Request::Send() for further information. The Request sent
654 * can always be assumed to be non-NULL, you should not change the request object or its data.
655 * Your method may return arbitary data in the char* result which the requesting module
656 * may be able to use for pre-determined purposes (e.g. the results of an SQL query, etc).
658 virtual char* OnRequest(Request* request);
660 /** Called whenever an oper password is to be compared to what a user has input.
661 * The password field (from the config file) is in 'password' and is to be compared against
662 * 'input'. This method allows for encryption of oper passwords and much more besides.
663 * You should return a nonzero value if you want to allow the comparison or zero if you wish
666 virtual int OnOperCompare(std::string password, std::string input);
668 /** Called whenever a user is given usermode +o, anywhere on the network.
669 * You cannot override this and prevent it from happening as it is already happened and
670 * such a task must be performed by another server. You can however bounce modes by sending
671 * servermodes out to reverse mode changes.
673 virtual void OnGlobalOper(userrec* user);
675 /** Called whenever a user connects, anywhere on the network.
676 * This event is informational only. You should not change any user information in this
677 * event. To do so, use the OnUserConnect method to change the state of local users.
679 virtual void OnGlobalConnect(userrec* user);
681 /** Called whenever a ban is added to a channel's list.
682 * Return a non-zero value to 'eat' the mode change and prevent the ban from being added.
684 virtual int OnAddBan(userrec* source, chanrec* channel,std::string banmask);
686 /** Called whenever a ban is removed from a channel's list.
687 * Return a non-zero value to 'eat' the mode change and prevent the ban from being removed.
689 virtual int OnDelBan(userrec* source, chanrec* channel,std::string banmask);
691 /** Called immediately after any connection is accepted. This is intended for raw socket
692 * processing (e.g. modules which wrap the tcp connection within another library) and provides
693 * no information relating to a user record as the connection has not been assigned yet.
694 * There are no return values from this call as all modules get an opportunity if required to
695 * process the connection.
697 virtual void OnRawSocketAccept(int fd, std::string ip, int localport);
699 /** Called immediately before any write() operation on a user's socket in the core. Because
700 * this event is a low level event no user information is associated with it. It is intended
701 * for use by modules which may wrap connections within another API such as SSL for example.
702 * return a non-zero result if you have handled the write operation, in which case the core
703 * will not call write().
705 virtual int OnRawSocketWrite(int fd, char* buffer, int count);
707 /** Called immediately before any socket is closed. When this event is called, shutdown()
708 * has not yet been called on the socket.
710 virtual void OnRawSocketClose(int fd);
712 /** Called immediately before any read() operation on a client socket in the core.
713 * This occurs AFTER the select() or poll() so there is always data waiting to be read
714 * when this event occurs.
715 * Your event should return 1 if it has handled the reading itself, which prevents the core
716 * just using read(). You should place any data read into buffer, up to but NOT GREATER THAN
717 * the value of count. The value of readresult must be identical to an actual result that might
718 * be returned from the read() system call, for example, number of bytes read upon success,
719 * 0 upon EOF or closed socket, and -1 for error. If your function returns a nonzero value,
720 * you MUST set readresult.
722 virtual int OnRawSocketRead(int fd, char* buffer, unsigned int count, int &readresult);
726 /** Allows server output and query functions
727 * This class contains methods which allow a module to query the state of the irc server, and produce
728 * output to users and other servers. All modules should instantiate at least one copy of this class,
729 * and use its member functions to perform their tasks.
731 class Server : public classbase
734 /** Default constructor.
735 * Creates a Server object.
738 /** Default destructor.
739 * Destroys a Server object.
743 /** Sends text to all opers.
744 * This method sends a server notice to all opers with the usermode +s.
746 virtual void SendOpers(std::string s);
747 /** Writes a log string.
748 * This method writes a line of text to the log. If the level given is lower than the
749 * level given in the configuration, this command has no effect.
751 virtual void Log(int level, std::string s);
752 /** Sends a line of text down a TCP/IP socket.
753 * This method writes a line of text to an established socket, cutting it to 510 characters
754 * plus a carriage return and linefeed if required.
756 virtual void Send(int Socket, std::string s);
757 /** Sends text from the server to a socket.
758 * This method writes a line of text to an established socket, with the servername prepended
759 * as used by numerics (see RFC 1459)
761 virtual void SendServ(int Socket, std::string s);
762 /** Writes text to a channel, but from a server, including all.
763 * This can be used to send server notices to a group of users.
765 virtual void SendChannelServerNotice(std::string ServName, chanrec* Channel, std::string text);
766 /** Sends text from a user to a socket.
767 * This method writes a line of text to an established socket, with the given user's nick/ident
768 * /host combination prepended, as used in PRIVSG etc commands (see RFC 1459)
770 virtual void SendFrom(int Socket, userrec* User, std::string s);
771 /** Sends text from a user to another user.
772 * This method writes a line of text to a user, with a user's nick/ident
773 * /host combination prepended, as used in PRIVMSG etc commands (see RFC 1459)
774 * If you specify NULL as the source, then the data will originate from the
775 * local server, e.g. instead of:
777 * :user!ident@host TEXT
779 * The format will become:
783 * Which is useful for numerics and server notices to single users, etc.
785 virtual void SendTo(userrec* Source, userrec* Dest, std::string s);
786 /** Sends text from a user to a channel (mulicast).
787 * This method writes a line of text to a channel, with the given user's nick/ident
788 * /host combination prepended, as used in PRIVMSG etc commands (see RFC 1459). If the
789 * IncludeSender flag is set, then the text is also sent back to the user from which
790 * it originated, as seen in MODE (see RFC 1459).
792 virtual void SendChannel(userrec* User, chanrec* Channel, std::string s,bool IncludeSender);
793 /** Returns true if two users share a common channel.
794 * This method is used internally by the NICK and QUIT commands, and the Server::SendCommon
797 virtual bool CommonChannels(userrec* u1, userrec* u2);
798 /** Sends text from a user to one or more channels (mulicast).
799 * This method writes a line of text to all users which share a common channel with a given
800 * user, with the user's nick/ident/host combination prepended, as used in PRIVMSG etc
801 * commands (see RFC 1459). If the IncludeSender flag is set, then the text is also sent
802 * back to the user from which it originated, as seen in NICK (see RFC 1459). Otherwise, it
803 * is only sent to the other recipients, as seen in QUIT.
805 virtual void SendCommon(userrec* User, std::string text,bool IncludeSender);
806 /** Sends a WALLOPS message.
807 * This method writes a WALLOPS message to all users with the +w flag, originating from the
810 virtual void SendWallops(userrec* User, std::string text);
812 /** Returns true if a nick is valid.
813 * Nicks for unregistered connections will return false.
815 virtual bool IsNick(std::string nick);
816 /** Returns a count of the number of users on a channel.
817 * This will NEVER be 0, as if the chanrec exists, it will have at least one user in the channel.
819 virtual int CountUsers(chanrec* c);
820 /** Attempts to look up a nick and return a pointer to it.
821 * This function will return NULL if the nick does not exist.
823 virtual userrec* FindNick(std::string nick);
824 /** Attempts to look up a nick using the file descriptor associated with that nick.
825 * This function will return NULL if the file descriptor is not associated with a valid user.
827 virtual userrec* FindDescriptor(int socket);
828 /** Attempts to look up a channel and return a pointer to it.
829 * This function will return NULL if the channel does not exist.
831 virtual chanrec* FindChannel(std::string channel);
832 /** Attempts to look up a user's privilages on a channel.
833 * This function will return a string containing either @, %, +, or an empty string,
834 * representing the user's privilages upon the channel you specify.
836 virtual std::string ChanMode(userrec* User, chanrec* Chan);
837 /** Checks if a user is on a channel.
838 * This function will return true or false to indicate if user 'User' is on channel 'Chan'.
840 virtual bool IsOnChannel(userrec* User, chanrec* Chan);
841 /** Returns the server name of the server where the module is loaded.
843 virtual std::string GetServerName();
844 /** Returns the network name, global to all linked servers.
846 virtual std::string GetNetworkName();
847 /** Returns the server description string of the local server
849 virtual std::string GetServerDescription();
850 /** Returns the information of the server as returned by the /ADMIN command.
851 * See the Admin class for further information of the return value. The members
852 * Admin::Nick, Admin::Email and Admin::Name contain the information for the
853 * server where the module is loaded.
855 virtual Admin GetAdmin();
856 /** Adds an extended mode letter which is parsed by a module.
857 * This allows modules to add extra mode letters, e.g. +x for hostcloak.
858 * the "type" parameter is either MT_CHANNEL, MT_CLIENT, or MT_SERVER, to
859 * indicate wether the mode is a channel mode, a client mode, or a server mode.
860 * requires_oper is used with MT_CLIENT type modes only to indicate the mode can only
861 * be set or unset by an oper. If this is used for MT_CHANNEL type modes it is ignored.
862 * params_when_on is the number of modes to expect when the mode is turned on
863 * (for type MT_CHANNEL only), e.g. with mode +k, this would have a value of 1.
864 * the params_when_off value has a similar value to params_when_on, except it indicates
865 * the number of parameters to expect when the mode is disabled. Modes which act in a similar
866 * way to channel mode +l (e.g. require a parameter to enable, but not to disable) should
867 * use this parameter. The function returns false if the mode is unavailable, and will not
868 * attempt to allocate another character, as this will confuse users. This also means that
869 * as only one module can claim a specific mode character, the core does not need to keep track
870 * of which modules own which modes, which speeds up operation of the server. In this version,
871 * a mode can have at most one parameter, attempting to use more parameters will have undefined
874 virtual bool AddExtendedMode(char modechar, int type, bool requires_oper, int params_when_on, int params_when_off);
876 /** Adds an extended mode letter which is parsed by a module and handled in a list fashion.
877 * This call is used to implement modes like +q and +a. The characteristics of these modes are
880 * (1) They are ALWAYS on channels, not on users, therefore their type is MT_CHANNEL
882 * (2) They always take exactly one parameter when being added or removed
884 * (3) They can be set multiple times, usually on users in channels
886 * (4) The mode and its parameter are NOT stored in the channels modes structure
888 * It is down to the module handling the mode to maintain state and determine what 'items' (e.g. users,
889 * or a banlist) have the mode set on them, and process the modes at the correct times, e.g. during access
890 * checks on channels, etc. When the extended mode is triggered the OnExtendedMode method will be triggered
891 * as above. Note that the target you are given will be a channel, if for example your mode is set 'on a user'
892 * (in for example +a) you must use Server::Find to locate the user the mode is operating on.
893 * Your mode handler may return 1 to handle the mode AND tell the core to display the mode change, e.g.
894 * '+aaa one two three' in the case of the mode for 'two', or it may return -1 to 'eat' the mode change,
895 * so the above example would become '+aa one three' after processing.
897 virtual bool AddExtendedListMode(char modechar);
899 /** Adds a command to the command table.
900 * This allows modules to add extra commands into the command table. You must place a function within your
901 * module which is is of type handlerfunc:
903 * typedef void (handlerfunc) (char**, int, userrec*);
905 * void handle_kill(char **parameters, int pcnt, userrec *user)
907 * When the command is typed, the parameters will be placed into the parameters array (similar to argv) and
908 * the parameter count will be placed into pcnt (similar to argv). There will never be any less parameters
909 * than the 'minparams' value you specified when creating the command. The *user parameter is the class of
910 * the user which caused the command to trigger, who will always have the flag you specified in 'flags' when
911 * creating the initial command. For example to create an oper only command create the commands with flags='o'.
912 * The source parameter is used for resource tracking, and should contain the name of your module (with file
913 * extension) e.g. "m_blarp.so". If you place the wrong identifier here, you can cause crashes if your module
916 virtual void AddCommand(char* cmd, handlerfunc f, char flags, int minparams, char* source);
918 /** Sends a servermode.
919 * you must format the parameters array with the target, modes and parameters for those modes.
925 * modes[0] = ChannelName;
929 * modes[2] = user->nick;
931 * Srv->SendMode(modes,3,user);
933 * The modes will originate from the server where the command was issued, however responses (e.g. numerics)
934 * will be sent to the user you provide as the third parameter.
935 * You must be sure to get the number of parameters correct in the pcnt parameter otherwise you could leave
936 * your server in an unstable state!
939 virtual void SendMode(char **parameters, int pcnt, userrec *user);
941 /** Sends to all users matching a mode mask
942 * You must specify one or more usermodes as the first parameter. These can be RFC specified modes such as +i,
943 * or module provided modes, including ones provided by your own module.
944 * In the second parameter you must place a flag value which indicates wether the modes you have given will be
945 * logically ANDed or OR'ed. You may use one of either WM_AND or WM_OR.
946 * for example, if you were to use:
948 * Serv->SendToModeMask("xi", WM_OR, "m00");
950 * Then the text 'm00' will be sent to all users with EITHER mode x or i. Conversely if you used WM_AND, the
951 * user must have both modes set to receive the message.
953 virtual void SendToModeMask(std::string modes, int flags, std::string text);
955 /** Forces a user to join a channel.
956 * This is similar to svsjoin and can be used to implement redirection, etc.
957 * On success, the return value is a valid pointer to a chanrec* of the channel the user was joined to.
958 * On failure, the result is NULL.
960 virtual chanrec* JoinUserToChannel(userrec* user, std::string cname, std::string key);
962 /** Forces a user to part a channel.
963 * This is similar to svspart and can be used to implement redirection, etc.
964 * Although the return value of this function is a pointer to a channel record, the returned data is
965 * undefined and should not be read or written to. This behaviour may be changed in a future version.
967 virtual chanrec* PartUserFromChannel(userrec* user, std::string cname, std::string reason);
969 /** Forces a user nickchange.
970 * This command works similarly to SVSNICK, and can be used to implement Q-lines etc.
971 * If you specify an invalid nickname, the nick change will be dropped and the target user will receive
972 * the error numeric for it.
974 virtual void ChangeUserNick(userrec* user, std::string nickname);
976 /** Forces a user to quit with the specified reason.
977 * To the user, it will appear as if they typed /QUIT themselves, except for the fact that this function
978 * may bypass the quit prefix specified in the config file.
982 * Once you call this function, userrec* user will immediately become INVALID. You MUST NOT write to, or
983 * read from this pointer after calling the QuitUser method UNDER ANY CIRCUMSTANCES! The best course of
984 * action after calling this method is to immediately bail from your handler.
986 virtual void QuitUser(userrec* user, std::string reason);
988 /** Matches text against a glob pattern.
989 * Uses the ircd's internal matching function to match string against a globbing pattern, e.g. *!*@*.com
990 * Returns true if the literal successfully matches the pattern, false if otherwise.
992 virtual bool MatchText(std::string sliteral, std::string spattern);
994 /** Calls the handler for a command, either implemented by the core or by another module.
995 * You can use this function to trigger other commands in the ircd, such as PRIVMSG, JOIN,
996 * KICK etc, or even as a method of callback. By defining command names that are untypeable
997 * for users on irc (e.g. those which contain a \r or \n) you may use them as callback identifiers.
998 * The first parameter to this method is the name of the command handler you wish to call, e.g.
999 * PRIVMSG. This will be a command handler previously registered by the core or wih AddCommand().
1000 * The second parameter is an array of parameters, and the third parameter is a count of parameters
1001 * in the array. If you do not pass enough parameters to meet the minimum needed by the handler, the
1002 * functiom will silently ignore it. The final parameter is the user executing the command handler,
1003 * used for privilage checks, etc.
1005 virtual void CallCommandHandler(std::string commandname, char** parameters, int pcnt, userrec* user);
1007 virtual bool IsValidModuleCommand(std::string commandname, int pcnt, userrec* user);
1009 /** Change displayed hostname of a user.
1010 * You should always call this method to change a user's host rather than writing directly to the
1011 * dhost member of userrec, as any change applied via this method will be propogated to any
1014 virtual void ChangeHost(userrec* user, std::string host);
1016 /** Change GECOS (fullname) of a user.
1017 * You should always call this method to change a user's GECOS rather than writing directly to the
1018 * fullname member of userrec, as any change applied via this method will be propogated to any
1021 virtual void ChangeGECOS(userrec* user, std::string gecos);
1023 /** Returns true if the servername you give is ulined.
1024 * ULined servers have extra privilages. They are allowed to change nicknames on remote servers,
1025 * change modes of clients which are on remote servers and set modes of channels where there are
1026 * no channel operators for that channel on the ulined server, amongst other things. Ulined server
1027 * data is also broadcast across the mesh at all times as opposed to selectively messaged in the
1028 * case of normal servers, as many ulined server types (such as services) do not support meshed
1029 * links and must operate in this manner.
1031 virtual bool IsUlined(std::string server);
1033 /** Fetches the userlist of a channel. This function must be here and not a member of userrec or
1034 * chanrec due to include constraints.
1036 virtual chanuserlist GetUsers(chanrec* chan);
1038 /** Remove a user's connection to the irc server, but leave their client in existence in the
1039 * user hash. When you call this function, the user's file descriptor will be replaced with the
1040 * value of FD_MAGIC_NUMBER and their old file descriptor will be closed. This idle client will
1041 * remain until it is restored with a valid file descriptor, or is removed from IRC by an operator
1042 * After this call, the pointer to user will be invalid.
1044 virtual bool UserToPseudo(userrec* user,std::string message);
1046 /** This user takes one user, and switches their file descriptor with another user, so that one user
1047 * "becomes" the other. The user in 'alive' is booted off the server with the given message. The user
1048 * referred to by 'zombie' should have previously been locked with Server::ZombifyUser, otherwise
1049 * stale sockets and file descriptor leaks can occur. After this call, the pointer to alive will be
1050 * invalid, and the pointer to zombie will be equivalent in effect to the old pointer to alive.
1052 virtual bool PseudoToUser(userrec* alive,userrec* zombie,std::string message);
1055 * The G-line is propogated to all of the servers in the mesh and enforced as soon as it is added.
1056 * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
1057 * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
1058 * to indicate who or what sent the data, usually this is the nickname of a person, or a server
1061 virtual void AddGLine(long duration, std::string source, std::string reason, std::string hostmask);
1064 * The Q-line is propogated to all of the servers in the mesh and enforced as soon as it is added.
1065 * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
1066 * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
1067 * to indicate who or what sent the data, usually this is the nickname of a person, or a server
1070 virtual void AddQLine(long duration, std::string source, std::string reason, std::string nickname);
1073 * The Z-line is propogated to all of the servers in the mesh and enforced as soon as it is added.
1074 * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
1075 * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
1076 * to indicate who or what sent the data, usually this is the nickname of a person, or a server
1079 virtual void AddZLine(long duration, std::string source, std::string reason, std::string ipaddr);
1082 * The K-line is enforced as soon as it is added.
1083 * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
1084 * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
1085 * to indicate who or what sent the data, usually this is the nickname of a person, or a server
1088 virtual void AddKLine(long duration, std::string source, std::string reason, std::string hostmask);
1091 * The E-line is enforced as soon as it is added.
1092 * The duration must be in seconds, however you can use the Server::CalcDuration method to convert
1093 * durations into the 1w2d3h3m6s format used by /GLINE etc. The source is an arbitary string used
1094 * to indicate who or what sent the data, usually this is the nickname of a person, or a server
1097 virtual void AddELine(long duration, std::string source, std::string reason, std::string hostmask);
1099 /** Deletes a G-Line from all servers on the mesh
1101 virtual bool DelGLine(std::string hostmask);
1103 /** Deletes a Q-Line from all servers on the mesh
1105 virtual bool DelQLine(std::string nickname);
1107 /** Deletes a Z-Line from all servers on the mesh
1109 virtual bool DelZLine(std::string ipaddr);
1111 /** Deletes a local K-Line
1113 virtual bool DelKLine(std::string hostmask);
1115 /** Deletes a local E-Line
1117 virtual bool DelELine(std::string hostmask);
1119 /** Calculates a duration
1120 * This method will take a string containing a formatted duration (e.g. "1w2d") and return its value
1121 * as a total number of seconds. This is the same function used internally by /GLINE etc to set
1124 virtual long CalcDuration(std::string duration);
1126 /** Returns true if a nick!ident@host string is correctly formatted, false if otherwise.
1128 virtual bool IsValidMask(std::string mask);
1130 /** This function finds a module by name.
1131 * You must provide the filename of the module. If the module cannot be found (is not loaded)
1132 * the function will return NULL.
1134 virtual Module* FindModule(std::string name);
1136 /** Adds a class derived from InspSocket to the server's socket engine.
1138 virtual void AddSocket(InspSocket* sock);
1140 /** Deletes a class derived from InspSocket from the server's socket engine.
1142 virtual void DelSocket(InspSocket* sock);
1144 virtual void RehashServer();
1148 #define CONF_NOT_A_NUMBER 0x000010
1149 #define CONF_NOT_UNSIGNED 0x000080
1150 #define CONF_VALUE_NOT_FOUND 0x000100
1151 #define CONF_FILE_NOT_FOUND 0x000200
1154 /** Allows reading of values from configuration files
1155 * This class allows a module to read from either the main configuration file (inspircd.conf) or from
1156 * a module-specified configuration file. It may either be instantiated with one parameter or none.
1157 * Constructing the class using one parameter allows you to specify a path to your own configuration
1158 * file, otherwise, inspircd.conf is read.
1160 class ConfigReader : public classbase
1163 /** The contents of the configuration file
1164 * This protected member should never be accessed by a module (and cannot be accessed unless the
1165 * core is changed). It will contain a pointer to the configuration file data with unneeded data
1166 * (such as comments) stripped from it.
1168 std::stringstream *cache;
1169 std::stringstream *errorlog;
1170 /** Used to store errors
1176 /** Default constructor.
1177 * This constructor initialises the ConfigReader class to read the inspircd.conf file
1178 * as specified when running ./configure.
1180 ConfigReader(); // default constructor reads ircd.conf
1181 /** Overloaded constructor.
1182 * This constructor initialises the ConfigReader class to read a user-specified config file
1184 ConfigReader(std::string filename); // read a module-specific config
1185 /** Default destructor.
1186 * This method destroys the ConfigReader class.
1189 /** Retrieves a value from the config file.
1190 * This method retrieves a value from the config file. Where multiple copies of the tag
1191 * exist in the config file, index indicates which of the values to retrieve.
1193 std::string ReadValue(std::string tag, std::string name, int index);
1194 /** Retrieves a boolean value from the config file.
1195 * This method retrieves a boolean value from the config file. Where multiple copies of the tag
1196 * exist in the config file, index indicates which of the values to retrieve. The values "1", "yes"
1197 * and "true" in the config file count as true to ReadFlag, and any other value counts as false.
1199 bool ReadFlag(std::string tag, std::string name, int index);
1200 /** Retrieves an integer value from the config file.
1201 * This method retrieves an integer value from the config file. Where multiple copies of the tag
1202 * exist in the config file, index indicates which of the values to retrieve. Any invalid integer
1203 * values in the tag will cause the objects error value to be set, and any call to GetError() will
1204 * return CONF_INVALID_NUMBER to be returned. needs_unsigned is set if the number must be unsigned.
1205 * If a signed number is placed into a tag which is specified unsigned, 0 will be returned and GetError()
1206 * will return CONF_NOT_UNSIGNED
1208 long ReadInteger(std::string tag, std::string name, int index, bool needs_unsigned);
1209 /** Returns the last error to occur.
1210 * Valid errors can be found by looking in modules.h. Any nonzero value indicates an error condition.
1211 * A call to GetError() resets the error flag back to 0.
1214 /** Counts the number of times a given tag appears in the config file.
1215 * This method counts the number of times a tag appears in a config file, for use where
1216 * there are several tags of the same kind, e.g. with opers and connect types. It can be
1217 * used with the index value of ConfigReader::ReadValue to loop through all copies of a
1218 * multiple instance tag.
1220 int Enumerate(std::string tag);
1221 /** Returns true if a config file is valid.
1222 * This method is partially implemented and will only return false if the config
1223 * file does not exist or could not be opened.
1226 /** Dumps the list of errors in a config file to an output location. If bail is true,
1227 * then the program will abort. If bail is false and user points to a valid user
1228 * record, the error report will be spooled to the given user by means of NOTICE.
1229 * if bool is false AND user is false, the error report will be spooled to all opers
1230 * by means of a NOTICE to all opers.
1232 void DumpErrors(bool bail,userrec* user);
1234 /** Returns the number of items within a tag.
1235 * For example if the tag was <test tag="blah" data="foo"> then this
1236 * function would return 2. Spaces and newlines both qualify as valid seperators
1239 int EnumerateValues(std::string tag, int index);
1244 /** Caches a text file into memory and can be used to retrieve lines from it.
1245 * This class contains methods for read-only manipulation of a text file in memory.
1246 * Either use the constructor type with one parameter to load a file into memory
1247 * at construction, or use the LoadFile method to load a file.
1249 class FileReader : public classbase
1253 /** Default constructor.
1254 * This method does not load any file into memory, you must use the LoadFile method
1255 * after constructing the class this way.
1259 /** Secondary constructor.
1260 * This method initialises the class with a file loaded into it ready for GetLine and
1261 * and other methods to be called. If the file could not be loaded, FileReader::FileSize
1264 FileReader(std::string filename);
1266 /** Default destructor.
1267 * This deletes the memory allocated to the file.
1271 /** Used to load a file.
1272 * This method loads a file into the class ready for GetLine and
1273 * and other methods to be called. If the file could not be loaded, FileReader::FileSize
1276 void LoadFile(std::string filename);
1278 /** Returns true if the file exists
1279 * This function will return false if the file could not be opened.
1283 /** Retrieve one line from the file.
1284 * This method retrieves one line from the text file. If an empty non-NULL string is returned,
1285 * the index was out of bounds, or the line had no data on it.
1287 std::string GetLine(int x);
1289 /** Returns the size of the file in lines.
1290 * This method returns the number of lines in the read file. If it is 0, no lines have been
1291 * read into memory, either because the file is empty or it does not exist, or cannot be
1292 * opened due to permission problems.
1298 /** Instantiates classes inherited from Module
1299 * This class creates a class inherited from type Module, using new. This is to allow for modules
1300 * to create many different variants of Module, dependent on architecture, configuration, etc.
1301 * In most cases, the simple class shown in the example module m_foobar.so will suffice for most
1304 class ModuleFactory : public classbase
1308 virtual ~ModuleFactory() { }
1309 /** Creates a new module.
1310 * Your inherited class of ModuleFactory must return a pointer to your Module class
1311 * using this method.
1313 virtual Module * CreateModule() = 0;
1317 typedef DLLFactory<ModuleFactory> ircd_module;