GCC 4.5 warning fixups

[user/henk/code/inspircd.git] / include / modules.h

/*       +------------------------------------+
 *       | Inspire Internet Relay Chat Daemon |
 *       +------------------------------------+
 *
 *  InspIRCd: (C) 2002-2009 InspIRCd Development Team
 * See: http://wiki.inspircd.org/Credits
 *
 * This program is free but copyrighted software; see
 *          the file COPYING for details.
 *
 * ---------------------------------------------------
 */

#ifndef __MODULES_H
#define __MODULES_H

#include "dynamic.h"
#include "base.h"
#include "ctables.h"
#include "inspsocket.h"
#include <string>
#include <deque>
#include <sstream>
#include "timer.h"
#include "mode.h"
#include "dns.h"

/** Used to define a set of behavior bits for a module
 */
enum ModuleFlags {
        VF_NONE = 0,            // module is not special at all
        VF_STATIC = 1,          // module is static, cannot be /unloadmodule'd
        VF_VENDOR = 2,          // module is a vendor module (came in the original tarball, not 3rd party)
        VF_COMMON = 4,          // module needs to be common on all servers in a network to link
        VF_OPTCOMMON = 8,       // module should be common on all servers for unsurprising behavior
        VF_CORE = 16            // module is a core command, can be assumed loaded on all servers
};

/** Used to represent an event type, for user, channel or server
 */
enum TargetTypeFlags {
        TYPE_USER = 1,
        TYPE_CHANNEL,
        TYPE_SERVER,
        TYPE_OTHER
};

/** Used to represent wether a message was PRIVMSG or NOTICE
 */
enum MessageType {
        MSG_PRIVMSG = 0,
        MSG_NOTICE = 1
};

#define MOD_RES_ALLOW (ModResult(1))
#define MOD_RES_PASSTHRU (ModResult(0))
#define MOD_RES_DENY (ModResult(-1))

/** Used to represent an allow/deny module result.
 * Not constructed as an enum because it reverses the value logic of some functions;
 * the compiler will inline accesses to have the same efficiency as integer operations.
 */
struct ModResult {
        int res;
        ModResult() : res(0) {}
        explicit ModResult(int r) : res(r) {}
        inline bool operator==(const ModResult& r) const
        {
                return res == r.res;
        }
        inline bool operator!=(const ModResult& r) const
        {
                return res != r.res;
        }
        inline bool operator!() const
        {
                return !res;
        }
        inline bool check(bool def) const
        {
                return (res == 1 || (res == 0 && def));
        }
        /**
         * Merges two results, preferring ALLOW to DENY
         */
        inline ModResult operator+(const ModResult& r) const
        {
                if (res == r.res || r.res == 0)
                        return *this;
                if (res == 0)
                        return r;
                // they are different, and neither is passthru
                return MOD_RES_ALLOW;
        }
};

/** If you change the module API in any way, increment this value.
 * This MUST be a pure integer, with no parenthesis
 */
#define API_VERSION 137

/**
 * This #define allows us to call a method in all
 * loaded modules in a readable simple way, e.g.:
 * 'FOREACH_MOD(I_OnConnect,OnConnect(user));'
 */
#define FOREACH_MOD(y,x) do { \
        EventHandlerIter safei; \
        for (EventHandlerIter _i = ServerInstance->Modules->EventHandlers[y].begin(); _i != ServerInstance->Modules->EventHandlers[y].end(); ) \
        { \
                safei = _i; \
                ++safei; \
                try \
                { \
                        (*_i)->x ; \
                } \
                catch (CoreException& modexcept) \
                { \
                        ServerInstance->Logs->Log("MODULE",DEFAULT,"Exception caught: %s",modexcept.GetReason()); \
                } \
                _i = safei; \
        } \
} while (0);

/**
 * Custom module result handling loop. This is a paired macro, and should only
 * be used with while_each_hook.
 *
 * See src/channels.cpp for an example of use.
 */
#define DO_EACH_HOOK(n,v,args) \
do { \
        EventHandlerIter iter_ ## n = ServerInstance->Modules->EventHandlers[I_ ## n].begin(); \
        while (iter_ ## n != ServerInstance->Modules->EventHandlers[I_ ## n].end()) \
        { \
                Module* mod_ ## n = *iter_ ## n; \
                iter_ ## n ++; \
                try \
                { \
                        v = (mod_ ## n)->n args;

#define WHILE_EACH_HOOK(n) \
                } \
                catch (CoreException& except_ ## n) \
                { \
                        ServerInstance->Logs->Log("MODULE",DEFAULT,"Exception caught: %s", (except_ ## n).GetReason()); \
                        (void) mod_ ## n; /* catch mismatched pairs */ \
                } \
        } \
} while(0)

/**
 * Module result iterator
 * Runs the given hook until some module returns a useful result.
 *
 * Example: ModResult result;
 * FIRST_MOD_RESULT(OnUserPreNick, result, (user, newnick))
 */
#define FIRST_MOD_RESULT(n,v,args) do { \
        v = MOD_RES_PASSTHRU; \
        DO_EACH_HOOK(n,v,args) \
        { \
                if (v != MOD_RES_PASSTHRU) \
                        break; \
        } \
        WHILE_EACH_HOOK(n); \
} while (0)

/** Holds a module's Version information.
 * The members (set by the constructor only) indicate details as to the version number
 * of a module. A class of type Version is returned by the GetVersion method of the Module class.
 *
 * The core provides only one implementation of the template, causing a run-time linking
 * error when attempting to load a module compiled against a different API_VERSION.
 */
template<int api>
class CoreExport VersionBase
{
 public:
        /** Module description
         */
        const std::string description;
        /** Version information.
         */
        const std::string version;

        /** Flags
         */
        const int Flags;

        /** Initialize version class
         */
        VersionBase(const std::string &desc, int flags = VF_NONE, const std::string& src_rev = VERSION " r" REVISION);
};

typedef VersionBase<API_VERSION> Version;

/** The Request class is a unicast message directed at a given module.
 * When this class is properly instantiated it may be sent to a module
 * using the Send() method, which will call the given module's OnRequest
 * method with this class as its parameter.
 */
class CoreExport Request : public classbase
{
 public:
        /** This should be a null-terminated string identifying the type of request,
         * all modules should define this and use it to determine the nature of the
         * request before they attempt to cast the Request in any way.
         */
        const char* const id;
        /** This is a pointer to the sender of the message, which can be used to
         * directly trigger events, or to create a reply.
         */
        ModuleRef source;
        /** The single destination of the Request
         */
        ModuleRef dest;

        /** Create a new Request
         * This is for the 'new' way of defining a subclass
         * of Request and defining it in a common header,
         * passing an object of your Request subclass through
         * as a Request* and using the ID string to determine
         * what to cast it back to and the other end.
         */
        Request(Module* src, Module* dst, const char* idstr);
        /** Send the Request.
         */
        void Send();
};


/** The Event class is a unicast message directed at all modules.
 * When the class is properly instantiated it may be sent to all modules
 * using the Send() method, which will trigger the OnEvent method in
 * all modules passing the object as its parameter.
 */
class CoreExport Event : public classbase
{
 public:
        /** This is a pointer to the sender of the message, which can be used to
         * directly trigger events, or to create a reply.
         */
        ModuleRef source;
        /** The event identifier.
         * This is arbitary text which should be used to distinguish
         * one type of event from another.
         */
        const std::string id;

        /** Create a new Event
         */
        Event(Module* src, const std::string &eventid);
        /** Send the Event.
         * The return result of an Event::Send() will always be NULL as
         * no replies are expected.
         */
        void Send();
};

class CoreExport DataProvider : public ServiceProvider
{
 public:
        DataProvider(Module* Creator, const std::string& Name)
                : ServiceProvider(Creator, Name, SERVICE_DATA) {}
};

class CoreExport dynamic_reference_base : public interfacebase
{
 private:
        std::string name;
 protected:
        DataProvider* value;
 public:
        ModuleRef creator;
        dynamic_reference_base(Module* Creator, const std::string& Name);
        ~dynamic_reference_base();
        inline void ClearCache() { value = NULL; }
        inline const std::string& GetProvider() { return name; }
        void SetProvider(const std::string& newname);
        void lookup();
        operator bool();
};

template<typename T>
class dynamic_reference : public dynamic_reference_base
{
 public:
        dynamic_reference(Module* Creator, const std::string& Name)
                : dynamic_reference_base(Creator, Name) {}
        inline T* operator->()
        {
                if (!value)
                        lookup();
                return static_cast<T*>(value);
        }
};

/** Priority types which can be used by Module::Prioritize()
 */
enum Priority { PRIORITY_FIRST, PRIORITY_DONTCARE, PRIORITY_LAST, PRIORITY_BEFORE, PRIORITY_AFTER };

/** Implementation-specific flags which may be set in Module::Implements()
 */
enum Implementation
{
        I_BEGIN,
        I_OnUserConnect, I_OnUserQuit, I_OnUserDisconnect, I_OnUserJoin, I_OnUserPart, I_OnRehash,
        I_OnSendSnotice, I_OnUserPreJoin, I_OnUserPreKick, I_OnUserKick, I_OnOper, I_OnInfo, I_OnWhois,
        I_OnUserPreInvite, I_OnUserInvite, I_OnUserPreMessage, I_OnUserPreNotice, I_OnUserPreNick,
        I_OnUserMessage, I_OnUserNotice, I_OnMode, I_OnGetServerDescription, I_OnSyncUser,
        I_OnSyncChannel, I_OnDecodeMetaData, I_OnWallops, I_OnAcceptConnection,
        I_OnChangeHost, I_OnChangeName, I_OnAddLine, I_OnDelLine, I_OnExpireLine,
        I_OnUserPostNick, I_OnPreMode, I_On005Numeric, I_OnKill, I_OnRemoteKill, I_OnLoadModule,
        I_OnUnloadModule, I_OnBackgroundTimer, I_OnPreCommand, I_OnCheckReady, I_OnCheckInvite,
        I_OnRawMode, I_OnCheckKey, I_OnCheckLimit, I_OnCheckBan, I_OnCheckChannelBan, I_OnExtBanCheck,
        I_OnStats, I_OnChangeLocalUserHost, I_OnPreTopicChange,
        I_OnPostTopicChange, I_OnEvent, I_OnGlobalOper, I_OnPostConnect, I_OnAddBan,
        I_OnDelBan, I_OnChangeLocalUserGECOS, I_OnUserRegister, I_OnChannelPreDelete, I_OnChannelDelete,
        I_OnPostOper, I_OnSyncNetwork, I_OnSetAway, I_OnUserList, I_OnPostCommand, I_OnPostJoin,
        I_OnWhoisLine, I_OnBuildNeighborList, I_OnGarbageCollect,
        I_OnText, I_OnPassCompare, I_OnRunTestSuite, I_OnNamesListItem, I_OnNumeric, I_OnHookIO,
        I_OnPreRehash, I_OnModuleRehash, I_OnSendWhoLine, I_OnChangeIdent, I_OnChannelRestrictionApply,
        I_END
};

/** Base class for all InspIRCd modules
 *  This class is the base class for InspIRCd modules. All modules must inherit from this class,
 *  its methods will be called when irc server events occur. class inherited from module must be
 *  instantiated by the ModuleFactory class (see relevent section) for the module to be initialised.
 */
class CoreExport Module : public classbase, public usecountbase
{
 public:
        /** File that this module was loaded from
         */
        std::string ModuleSourceFile;
        /** Reference to the dlopen() value
         */
        DLLManager* ModuleDLLManager;

        /** Default constructor.
         * Creates a module class.
         * @param Me An instance of the InspIRCd class which will be saved into ServerInstance for your use
         * \exception ModuleException Throwing this class, or any class derived from ModuleException, causes loading of the module to abort.
         */
        Module();

        /** Clean up prior to destruction
         * If you override, you must call this AFTER your module's cleanup
         */
        virtual CullResult cull();

        /** Default destructor.
         * destroys a module class
         */
        virtual ~Module();

        virtual void Prioritize()
        {
        }

        /** Returns the version number of a Module.
         * The method should return a Version object with its version information assigned via
         * Version::Version
         */
        virtual Version GetVersion() = 0;

        /** Called when a user connects.
         * The details of the connecting user are available to you in the parameter User *user
         * @param user The user who is connecting
         */
        virtual void OnUserConnect(LocalUser* user);

        /** Called when a user quits.
         * The details of the exiting user are available to you in the parameter User *user
         * This event is only called when the user is fully registered when they quit. To catch
         * raw disconnections, use the OnUserDisconnect method.
         * @param user The user who is quitting
         * @param message The user's quit message (as seen by non-opers)
         * @param oper_message The user's quit message (as seen by opers)
         */
        virtual void OnUserQuit(User* user, const std::string &message, const std::string &oper_message);

        /** Called whenever a user's socket is closed.
         * The details of the exiting user are available to you in the parameter User *user
         * This event is called for all users, registered or not, as a cleanup method for modules
         * which might assign resources to user, such as dns lookups, objects and sockets.
         * @param user The user who is disconnecting
         */
        virtual void OnUserDisconnect(LocalUser* user);

        /** Called whenever a channel is about to be deleted
         * @param chan The channel being deleted
         * @return An integer specifying whether or not the channel may be deleted. 0 for yes, 1 for no.
         */
        virtual ModResult OnChannelPreDelete(Channel *chan);

        /** Called whenever a channel is deleted, either by QUIT, KICK or PART.
         * @param chan The channel being deleted
         */
        virtual void OnChannelDelete(Channel* chan);

        /** Called when a user joins a channel.
         * The details of the joining user are available to you in the parameter User *user,
         * and the details of the channel they have joined is available in the variable Channel *channel
         * @param memb The channel membership being created
         * @param sync This is set to true if the JOIN is the result of a network sync and the remote user is being introduced
         * to a channel due to the network sync.
         * @param created This is true if the join created the channel
         */
        virtual void OnUserJoin(Membership* memb, bool sync, bool created, CUList& except_list);

        /** Called after a user joins a channel
         * Identical to OnUserJoin, but called immediately afterwards, when any linking module has
         * seen the join.
         * @param memb The channel membership created
         */
        virtual void OnPostJoin(Membership*);

        /** Called when a user parts a channel.
         * The details of the leaving user are available to you in the parameter User *user,
         * and the details of the channel they have left is available in the variable Channel *channel
         * @param memb The channel membership being destroyed
         * @param partmessage The part message, or an empty string (may be modified)
         */
        virtual void OnUserPart(Membership* memb, std::string &partmessage, CUList& except_list);

        /** Called on rehash.
         * This method is called prior to a /REHASH or when a SIGHUP is received from the operating
         * system. This is called in all cases -- including when this server will not execute the
         * rehash because it is directed at a remote server.
         *
         * @param user The user performing the rehash, if any. If this is server initiated, the value of
         * this variable will be NULL.
         * @param parameter The (optional) parameter given to REHASH from the user. Empty when server
         * initiated.
         */
        virtual void OnPreRehash(User* user, const std::string &parameter);

        /** Called on rehash.
         * This method is called when a user initiates a module-specific rehash. This can be used to do
         * expensive operations (such as reloading SSL certificates) that are not executed on a normal
         * rehash for efficiency. A rehash of this type does not reload the core configuration.
         *
         * @param user The user performing the rehash.
         * @param parameter The parameter given to REHASH
         */
        virtual void OnModuleRehash(User* user, const std::string &parameter);

        /** Called on rehash.
         * This method is called after a rehash has completed. You should use it to reload any module
         * configuration from the main configuration file.
         * @param user The user that performed the rehash, if it was initiated by a user and that user
         * is still connected.
         */
        virtual void OnRehash(User* user);

        /** Called whenever a snotice is about to be sent to a snomask.
         * snomask and type may both be modified; the message may not.
         * @param snomask The snomask the message is going to (e.g. 'A')
         * @param type The textual description the snomask will go to (e.g. 'OPER')
         * @param message The text message to be sent via snotice
         * @return 1 to block the snotice from being sent entirely, 0 else.
         */
        virtual ModResult OnSendSnotice(char &snomask, std::string &type, const std::string &message);

        /** Called whenever a user is about to join a channel, before any processing is done.
         * Returning a value of 1 from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc. This is useful for modules which may want to mimic +b, +k, +l etc. Returning -1 from
         * this function forces the join to be allowed, bypassing restrictions such as banlists, invite, keys etc.
         *
         * IMPORTANT NOTE!
         *
         * If the user joins a NEW channel which does not exist yet, OnUserPreJoin will be called BEFORE the channel
         * record is created. This will cause Channel* chan to be NULL. There is very little you can do in form of
         * processing on the actual channel record at this point, however the channel NAME will still be passed in
         * char* cname, so that you could for example implement a channel blacklist or whitelist, etc.
         * @param user The user joining the channel
         * @param chan If the  channel is a new channel, this will be NULL, otherwise it will be a pointer to the channel being joined
         * @param cname The channel name being joined. For new channels this is valid where chan is not.
         * @param privs A string containing the users privilages when joining the channel. For new channels this will contain "o".
         * You may alter this string to alter the user's modes on the channel.
         * @param keygiven The key given to join the channel, or an empty string if none was provided
         * @return 1 To prevent the join, 0 to allow it.
         */
        virtual ModResult OnUserPreJoin(User* user, Channel* chan, const char* cname, std::string &privs, const std::string &keygiven);

        /** Called whenever a user is about to be kicked.
         * Returning a value of 1 from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc.
         * @param source The user issuing the kick
         * @param user The user being kicked
         * @param chan The channel the user is being kicked from
         * @param reason The kick reason
         * @return 1 to prevent the kick, 0 to continue normally, -1 to explicitly allow the kick regardless of normal operation
         */
        virtual ModResult OnUserPreKick(User* source, Membership* memb, const std::string &reason);

        /** Called whenever a user is kicked.
         * If this method is called, the kick is already underway and cannot be prevented, so
         * to prevent a kick, please use Module::OnUserPreKick instead of this method.
         * @param source The user issuing the kick
         * @param user The user being kicked
         * @param chan The channel the user is being kicked from
         * @param reason The kick reason
         */
        virtual void OnUserKick(User* source, Membership* memb, const std::string &reason, CUList& except_list);

        /** Called whenever a user opers locally.
         * The User will contain the oper mode 'o' as this function is called after any modifications
         * are made to the user's structure by the core.
         * @param user The user who is opering up
         * @param opertype The opers type name
         */
        virtual void OnOper(User* user, const std::string &opertype);

        /** Called after a user opers locally.
         * This is identical to Module::OnOper(), except it is called after OnOper so that other modules
         * can be gauranteed to already have processed the oper-up, for example m_spanningtree has sent
         * out the OPERTYPE, etc.
         * @param user The user who is opering up
         * @param opername The name of the oper that the user is opering up to. Only valid locally. Empty string otherwise.
         * @param opertype The opers type name
         */
        virtual void OnPostOper(User* user, const std::string &opername, const std::string &opertype);

        /** Called whenever a user types /INFO.
         * The User will contain the information of the user who typed the command. Modules may use this
         * method to output their own credits in /INFO (which is the ircd's version of an about box).
         * It is purposefully not possible to modify any info that has already been output, or halt the list.
         * You must write a 371 numeric to the user, containing your info in the following format:
         *
         * &lt;nick&gt; :information here
         *
         * @param user The user issuing /INFO
         */
        virtual void OnInfo(User* user);

        /** Called whenever a /WHOIS is performed on a local user.
         * The source parameter contains the details of the user who issued the WHOIS command, and
         * the dest parameter contains the information of the user they are whoising.
         * @param source The user issuing the WHOIS command
         * @param dest The user who is being WHOISed
         */
        virtual void OnWhois(User* source, User* dest);

        /** Called whenever a user is about to invite another user into a channel, before any processing is done.
         * Returning 1 from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc. This is useful for modules which may want to filter invites to channels.
         * @param source The user who is issuing the INVITE
         * @param dest The user being invited
         * @param channel The channel the user is being invited to
         * @param timeout The time the invite will expire (0 == never)
         * @return 1 to deny the invite, 0 to check whether or not the user has permission to invite, -1 to explicitly allow the invite
         */
        virtual ModResult OnUserPreInvite(User* source,User* dest,Channel* channel, time_t timeout);

        /** Called after a user has been successfully invited to a channel.
         * You cannot prevent the invite from occuring using this function, to do that,
         * use OnUserPreInvite instead.
         * @param source The user who is issuing the INVITE
         * @param dest The user being invited
         * @param channel The channel the user is being invited to
         * @param timeout The time the invite will expire (0 == never)
         */
        virtual void OnUserInvite(User* source,User* dest,Channel* channel, time_t timeout);

        /** Called whenever a user is about to PRIVMSG A user or a channel, before any processing is done.
         * Returning any nonzero value from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc. This is useful for modules which may want to filter or redirect messages.
         * target_type can be one of TYPE_USER or TYPE_CHANNEL. If the target_type value is a user,
         * you must cast dest to a User* otherwise you must cast it to a Channel*, this is the details
         * of where the message is destined to be sent.
         * @param user The user sending the message
         * @param dest The target of the message (Channel* or User*)
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text Changeable text being sent by the user
         * @param status The status being used, e.g. PRIVMSG @#chan has status== '@', 0 to send to everyone.
         * @param exempt_list A list of users not to send to. For channel messages, this will usually contain just the sender.
         * It will be ignored for private messages.
         * @return 1 to deny the message, 0 to allow it
         */
        virtual ModResult OnUserPreMessage(User* user,void* dest,int target_type, std::string &text,char status, CUList &exempt_list);

        /** Called whenever a user is about to NOTICE A user or a channel, before any processing is done.
         * Returning any nonzero value from this function stops the process immediately, causing no
         * output to be sent to the user by the core. If you do this you must produce your own numerics,
         * notices etc. This is useful for modules which may want to filter or redirect messages.
         * target_type can be one of TYPE_USER or TYPE_CHANNEL. If the target_type value is a user,
         * you must cast dest to a User* otherwise you must cast it to a Channel*, this is the details
         * of where the message is destined to be sent.
         * You may alter the message text as you wish before relinquishing control to the next module
         * in the chain, and if no other modules block the text this altered form of the text will be sent out
         * to the user and possibly to other servers.
         * @param user The user sending the message
         * @param dest The target of the message (Channel* or User*)
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text Changeable text being sent by the user
         * @param status The status being used, e.g. PRIVMSG @#chan has status== '@', 0 to send to everyone.
         * @param exempt_list A list of users not to send to. For channel notices, this will usually contain just the sender.
         * It will be ignored for private notices.
         * @return 1 to deny the NOTICE, 0 to allow it
         */
        virtual ModResult OnUserPreNotice(User* user,void* dest,int target_type, std::string &text,char status, CUList &exempt_list);

        /** Called when sending a message to all "neighbors" of a given user -
         * that is, all users that share a common channel. This is used in
         * commands such as NICK, QUIT, etc.
         * @param source The source of the message
         * @param include_c Channels to scan for users to include
         * @param exceptions Map of user->bool that overrides the inclusion decision
         *
         * Set exceptions[user] = true to include, exceptions[user] = false to exclude
         */
        virtual void OnBuildNeighborList(User* source, UserChanList &include_c, std::map<User*,bool> &exceptions);

        /** Called before any nickchange, local or remote. This can be used to implement Q-lines etc.
         * Please note that although you can see remote nickchanges through this function, you should
         * NOT make any changes to the User if the user is a remote user as this may cause a desnyc.
         * check user->server before taking any action (including returning nonzero from the method).
         * If your method returns nonzero, the nickchange is silently forbidden, and it is down to your
         * module to generate some meaninful output.
         * @param user The username changing their nick
         * @param newnick Their new nickname
         * @return 1 to deny the change, 0 to allow
         */
        virtual ModResult OnUserPreNick(User* user, const std::string &newnick);

        /** Called after any PRIVMSG sent from a user.
         * The dest variable contains a User* if target_type is TYPE_USER and a Channel*
         * if target_type is TYPE_CHANNEL.
         * @param user The user sending the message
         * @param dest The target of the message
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text the text being sent by the user
         * @param status The status being used, e.g. PRIVMSG @#chan has status== '@', 0 to send to everyone.
         */
        virtual void OnUserMessage(User* user, void* dest, int target_type, const std::string &text, char status, const CUList &exempt_list);

        /** Called after any NOTICE sent from a user.
         * The dest variable contains a User* if target_type is TYPE_USER and a Channel*
         * if target_type is TYPE_CHANNEL.
         * @param user The user sending the message
         * @param dest The target of the message
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text the text being sent by the user
         * @param status The status being used, e.g. NOTICE @#chan has status== '@', 0 to send to everyone.
         */
        virtual void OnUserNotice(User* user, void* dest, int target_type, const std::string &text, char status, const CUList &exempt_list);

        /** Called immediately before any NOTICE or PRIVMSG sent from a user, local or remote.
         * The dest variable contains a User* if target_type is TYPE_USER and a Channel*
         * if target_type is TYPE_CHANNEL.
         * The difference between this event and OnUserPreNotice/OnUserPreMessage is that delivery is gauranteed,
         * the message has already been vetted. In the case of the other two methods, a later module may stop your
         * message. This also differs from OnUserMessage which occurs AFTER the message has been sent.
         * @param user The user sending the message
         * @param dest The target of the message
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text the text being sent by the user
         * @param status The status being used, e.g. NOTICE @#chan has status== '@', 0 to send to everyone.
         */
        virtual void OnText(User* user, void* dest, int target_type, const std::string &text, char status, CUList &exempt_list);

        /** Called after every MODE command sent from a user
         * The dest variable contains a User* if target_type is TYPE_USER and a Channel*
         * if target_type is TYPE_CHANNEL. The text variable contains the remainder of the
         * mode string after the target, e.g. "+wsi" or "+ooo nick1 nick2 nick3".
         * @param user The user sending the MODEs
         * @param dest The target of the modes (User* or Channel*)
         * @param target_type The type of target (TYPE_USER or TYPE_CHANNEL)
         * @param text The actual modes and their parameters if any
         * @param translate The translation types of the mode parameters
         */
        virtual void OnMode(User* user, void* dest, int target_type, const std::vector<std::string> &text, const std::vector<TranslateType> &translate);

        /** Allows modules to alter or create server descriptions
         * Whenever a module requires a server description, for example for display in
         * WHOIS, this function is called in all modules. You may change or define the
         * description given in std::string &description. If you do, this description
         * will be shown in the WHOIS fields.
         * @param servername The servername being searched for
         * @param description Alterable server description for this server
         */
        virtual void OnGetServerDescription(const std::string &servername,std::string &description);

        /** Allows modules to synchronize data which relates to users during a netburst.
         * When this function is called, it will be called from the module which implements
         * the linking protocol. This currently is m_spanningtree.so. A pointer to this module
         * is given in Module* proto, so that you may call its methods such as ProtoSendMode
         * (see below). This function will be called for every user visible on your side
         * of the burst, allowing you to for example set modes, etc. Do not use this call to
         * synchronize data which you have stored using class Extensible -- There is a specialist
         * function OnSyncUserMetaData and OnSyncChannelMetaData for this!
         * @param user The user being syncronized
         * @param proto A pointer to the module handling network protocol
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         */
        virtual void OnSyncUser(User* user, Module* proto, void* opaque);

        /** Allows modules to synchronize data which relates to channels during a netburst.
         * When this function is called, it will be called from the module which implements
         * the linking protocol. This currently is m_spanningtree.so. A pointer to this module
         * is given in Module* proto, so that you may call its methods such as ProtoSendMode
         * (see below). This function will be called for every user visible on your side
         * of the burst, allowing you to for example set modes, etc.
         *
         * For a good example of how to use this function, please see src/modules/m_chanprotect.cpp
         *
         * @param chan The channel being syncronized
         * @param proto A pointer to the module handling network protocol
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         */
        virtual void OnSyncChannel(Channel* chan, Module* proto, void* opaque);

        /* Allows modules to syncronize metadata not related to users or channels, over the network during a netburst.
         * Whenever the linking module wants to send out data, but doesnt know what the data
         * represents (e.g. it is Extensible metadata, added to a User or Channel by a module) then
         * this method is called. You should use the ProtoSendMetaData function after you've
         * correctly decided how the data should be represented, to send the metadata on its way if
         * if it belongs to your module.
         * @param proto A pointer to the module handling network protocol
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         * @param displayable If this value is true, the data is going to be displayed to a user,
         * and not sent across the network. Use this to determine wether or not to show sensitive data.
         */
        virtual void OnSyncNetwork(Module* proto, void* opaque);

        /** Allows module data, sent via ProtoSendMetaData, to be decoded again by a receiving module.
         * Please see src/modules/m_swhois.cpp for a working example of how to use this method call.
         * @param target_type The type of item to decode data for, TYPE_USER or TYPE_CHANNEL
         * @param target The Channel* or User* that data should be added to
         * @param extname The extension name which is being sent
         * @param extdata The extension data, encoded at the other end by an identical module through OnSyncChannelMetaData or OnSyncUserMetaData
         */
        virtual void OnDecodeMetaData(Extensible* target, const std::string &extname, const std::string &extdata);

        /** Implemented by modules which provide the ability to link servers.
         * These modules will implement this method, which allows transparent sending of servermodes
         * down the network link as a broadcast, without a module calling it having to know the format
         * of the MODE command before the actual mode string.
         *
         * More documentation to follow soon. Please see src/modules/m_chanprotect.cpp for examples
         * of how to use this function.
         *
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         * @param target_type The type of item to decode data for, TYPE_USER or TYPE_CHANNEL
         * @param target The Channel* or User* that modes should be sent for
         * @param modeline The modes and parameters to be sent
         * @param translate The translation types of the mode parameters
         */
        virtual void ProtoSendMode(void* opaque, TargetTypeFlags target_type, void* target, const std::vector<std::string> &modeline, const std::vector<TranslateType> &translate);

        /** Implemented by modules which provide the ability to link servers.
         * These modules will implement this method, which allows metadata (extra data added to
         * user and channel records using class Extensible, Extensible::Extend, etc) to be sent
         * to other servers on a netburst and decoded at the other end by the same module on a
         * different server.
         *
         * More documentation to follow soon. Please see src/modules/m_swhois.cpp for example of
         * how to use this function.
         * @param opaque An opaque pointer set by the protocol module, should not be modified!
         * @param target_type The type of item to decode data for, TYPE_USER or TYPE_CHANNEL
         * @param target The Channel* or User* that metadata should be sent for
         * @param extname The extension name to send metadata for
         * @param extdata Encoded data for this extension name, which will be encoded at the oppsite end by an identical module using OnDecodeMetaData
         */
        virtual void ProtoSendMetaData(void* opaque, Extensible* target, const std::string &extname, const std::string &extdata);

        /** Called after every WALLOPS command.
         * @param user The user sending the WALLOPS
         * @param text The content of the WALLOPS message
         */
        virtual void OnWallops(User* user, const std::string &text);

        /** Called whenever a user's hostname is changed.
         * This event triggers after the host has been set.
         * @param user The user whos host is being changed
         * @param newhost The new hostname being set
         */
        virtual void OnChangeHost(User* user, const std::string &newhost);

        /** Called whenever a user's GECOS (realname) is changed.
         * This event triggers after the name has been set.
         * @param user The user who's GECOS is being changed
         * @param gecos The new GECOS being set on the user
         */
        virtual void OnChangeName(User* user, const std::string &gecos);

        /** Called whenever a user's IDENT is changed.
         * This event triggers after the name has been set.
         * @param user The user who's IDENT is being changed
         * @param gecos The new IDENT being set on the user
         */
        virtual void OnChangeIdent(User* user, const std::string &ident);

        /** Called whenever an xline is added by a local user.
         * This method is triggered after the line is added.
         * @param source The sender of the line or NULL for local server
         * @param line The xline being added
         */
        virtual void OnAddLine(User* source, XLine* line);

        /** Called whenever an xline is deleted MANUALLY. See OnExpireLine for expiry.
         * This method is triggered after the line is deleted.
         * @param source The user removing the line or NULL for local server
         * @param line the line being deleted
         */
        virtual void OnDelLine(User* source, XLine* line);

        /** Called whenever an xline expires.
         * This method is triggered after the line is deleted.
         * @param line The line being deleted.
         */
        virtual void OnExpireLine(XLine *line);

        /** Called before your module is unloaded to clean up Extensibles.
         * This method is called once for every user and channel on the network,
         * so that when your module unloads it may clear up any remaining data
         * in the form of Extensibles added using Extensible::Extend().
         * If the target_type variable is TYPE_USER, then void* item refers to
         * a User*, otherwise it refers to a Channel*.
         * @param target_type The type of item being cleaned
         * @param item A pointer to the item's class
         */
        virtual void OnCleanup(int target_type, void* item);

        /** Called after any nickchange, local or remote. This can be used to track users after nickchanges
         * have been applied. Please note that although you can see remote nickchanges through this function, you should
         * NOT make any changes to the User if the user is a remote user as this may cause a desnyc.
         * check user->server before taking any action (including returning nonzero from the method).
         * Because this method is called after the nickchange is taken place, no return values are possible
         * to indicate forbidding of the nick change. Use OnUserPreNick for this.
         * @param user The user changing their nick
         * @param oldnick The old nickname of the user before the nickchange
         */
        virtual void OnUserPostNick(User* user, const std::string &oldnick);

        /** Called before any mode change, to allow a single access check for
         * a full mode change (use OnRawMode to check individual modes)
         *
         * Returning MOD_RES_ALLOW will skip prefix level checks, but can be overridden by
         * OnRawMode for each individual mode
         *
         * @param source the user making the mode change
         * @param dest the user destination of the umode change (NULL if a channel mode)
         * @param channel the channel destination of the mode change
         * @param parameters raw mode parameters; parameters[0] is the user/channel being changed
         */
        virtual ModResult OnPreMode(User* source, User* dest, Channel* channel, const std::vector<std::string>& parameters);

        /** Called when a 005 numeric is about to be output.
         * The module should modify the 005 numeric if needed to indicate its features.
         * @param output The 005 string to be modified if neccessary.
         */
        virtual void On005Numeric(std::string &output);

        /** Called when a client is disconnected by KILL.
         * If a client is killed by a server, e.g. a nickname collision or protocol error,
         * source is NULL.
         * Return 1 from this function to prevent the kill, and 0 from this function to allow
         * it as normal. If you prevent the kill no output will be sent to the client, it is
         * down to your module to generate this information.
         * NOTE: It is NOT advisable to stop kills which originate from servers or remote users.
         * If you do so youre risking race conditions, desyncs and worse!
         * @param source The user sending the KILL
         * @param dest The user being killed
         * @param reason The kill reason
         * @return 1 to prevent the kill, 0 to allow
         */
        virtual ModResult OnKill(User* source, User* dest, const std::string &reason);

        /** Called when an oper wants to disconnect a remote user via KILL
         * @param source The user sending the KILL
         * @param dest The user being killed
         * @param reason The kill reason
         */
        virtual void OnRemoteKill(User* source, User* dest, const std::string &reason, const std::string &operreason);

        /** Called whenever a module is loaded.
         * mod will contain a pointer to the module, and string will contain its name,
         * for example m_widgets.so. This function is primary for dependency checking,
         * your module may decide to enable some extra features if it sees that you have
         * for example loaded "m_killwidgets.so" with "m_makewidgets.so". It is highly
         * recommended that modules do *NOT* bail if they cannot satisfy dependencies,
         * but instead operate under reduced functionality, unless the dependency is
         * absolutely neccessary (e.g. a module that extends the features of another
         * module).
         * @param mod A pointer to the new module
         */
        virtual void OnLoadModule(Module* mod);

        /** Called whenever a module is unloaded.
         * mod will contain a pointer to the module, and string will contain its name,
         * for example m_widgets.so. This function is primary for dependency checking,
         * your module may decide to enable some extra features if it sees that you have
         * for example loaded "m_killwidgets.so" with "m_makewidgets.so". It is highly
         * recommended that modules do *NOT* bail if they cannot satisfy dependencies,
         * but instead operate under reduced functionality, unless the dependency is
         * absolutely neccessary (e.g. a module that extends the features of another
         * module).
         * @param mod Pointer to the module being unloaded (still valid)
         * @param name The filename of the module being unloaded
         */
        virtual void OnUnloadModule(Module* mod);

        /** Called once every five seconds for background processing.
         * This timer can be used to control timed features. Its period is not accurate
         * enough to be used as a clock, but it is gauranteed to be called at least once in
         * any five second period, directly from the main loop of the server.
         * @param curtime The current timer derived from time(2)
         */
        virtual void OnBackgroundTimer(time_t curtime);

        /** Called whenever any command is about to be executed.
         * This event occurs for all registered commands, wether they are registered in the core,
         * or another module, and for invalid commands. Invalid commands may only be sent to this
         * function when the value of validated is false. By returning 1 from this method you may prevent the
         * command being executed. If you do this, no output is created by the core, and it is
         * down to your module to produce any output neccessary.
         * Note that unless you return 1, you should not destroy any structures (e.g. by using
         * InspIRCd::QuitUser) otherwise when the command's handler function executes after your
         * method returns, it will be passed an invalid pointer to the user object and crash!)
         * @param command The command being executed
         * @param parameters An array of array of characters containing the parameters for the command
         * @param pcnt The nuimber of parameters passed to the command
         * @param user the user issuing the command
         * @param validated True if the command has passed all checks, e.g. it is recognised, has enough parameters, the user has permission to execute it, etc.
         * You should only change the parameter list and command string if validated == false (e.g. before the command lookup occurs).
         * @param original_line The entire original line as passed to the parser from the user
         * @return 1 to block the command, 0 to allow
         */
        virtual ModResult OnPreCommand(std::string &command, std::vector<std::string>& parameters, User *user, bool validated, const std::string &original_line);

        /** Called after any command has been executed.
         * This event occurs for all registered commands, wether they are registered in the core,
         * or another module, but it will not occur for invalid commands (e.g. ones which do not
         * exist within the command table). The result code returned by the command handler is
         * provided.
         * @param command The command being executed
         * @param parameters An array of array of characters containing the parameters for the command
         * @param pcnt The nuimber of parameters passed to the command
         * @param user the user issuing the command
         * @param result The return code given by the command handler, one of CMD_SUCCESS or CMD_FAILURE
         * @param original_line The entire original line as passed to the parser from the user
         */
        virtual void OnPostCommand(const std::string &command, const std::vector<std::string>& parameters, User *user, CmdResult result, const std::string &original_line);

        /** Called to check if a user who is connecting can now be allowed to register
         * If any modules return false for this function, the user is held in the waiting
         * state until all modules return true. For example a module which implements ident
         * lookups will continue to return false for a user until their ident lookup is completed.
         * Note that the registration timeout for a user overrides these checks, if the registration
         * timeout is reached, the user is disconnected even if modules report that the user is
         * not ready to connect.
         * @param user The user to check
         * @return true to indicate readiness, false if otherwise
         */
        virtual ModResult OnCheckReady(LocalUser* user);

        /** Called whenever a user is about to register their connection (e.g. before the user
         * is sent the MOTD etc). Modules can use this method if they are performing a function
         * which must be done before the actual connection is completed (e.g. ident lookups,
         * dnsbl lookups, etc).
         * Note that you should NOT delete the user record here by causing a disconnection!
         * Use OnUserConnect for that instead.
         * @param user The user registering
         * @return 1 to indicate user quit, 0 to continue
         */
        virtual ModResult OnUserRegister(LocalUser* user);

        /** Called whenever a user joins a channel, to determine if invite checks should go ahead or not.
         * This method will always be called for each join, wether or not the channel is actually +i, and
         * determines the outcome of an if statement around the whole section of invite checking code.
         * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
         * @param user The user joining the channel
         * @param chan The channel being joined
         * @return 1 to explicitly allow the join, 0 to proceed as normal
         */
        virtual ModResult OnCheckInvite(User* user, Channel* chan);

        /** Called whenever a mode character is processed.
         * Return 1 from this function to block the mode character from being processed entirely.
         * @param user The user who is sending the mode
         * @param chan The channel the mode is being sent to (or NULL if a usermode)
         * @param mode The mode character being set
         * @param param The parameter for the mode or an empty string
         * @param adding true of the mode is being added, false if it is being removed
         * @param pcnt The parameter count for the mode (0 or 1)
         * @return ACR_DENY to deny the mode, ACR_DEFAULT to do standard mode checking, and ACR_ALLOW
         * to skip all permission checking. Please note that for remote mode changes, your return value
         * will be ignored!
         */
        virtual ModResult OnRawMode(User* user, Channel* chan, const char mode, const std::string &param, bool adding, int pcnt);

        /** Called whenever a user joins a channel, to determine if key checks should go ahead or not.
         * This method will always be called for each join, wether or not the channel is actually +k, and
         * determines the outcome of an if statement around the whole section of key checking code.
         * if the user specified no key, the keygiven string will be a valid but empty value.
         * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
         * @param user The user joining the channel
         * @param chan The channel being joined
         * @return 1 to explicitly allow the join, 0 to proceed as normal
         */
        virtual ModResult OnCheckKey(User* user, Channel* chan, const std::string &keygiven);

        /** Called whenever a user joins a channel, to determine if channel limit checks should go ahead or not.
         * This method will always be called for each join, wether or not the channel is actually +l, and
         * determines the outcome of an if statement around the whole section of channel limit checking code.
         * return 1 to explicitly allow the join to go ahead or 0 to ignore the event.
         * @param user The user joining the channel
         * @param chan The channel being joined
         * @return 1 to explicitly allow the join, 0 to proceed as normal
         */
        virtual ModResult OnCheckLimit(User* user, Channel* chan);

        /**
         * Checks for a user's ban from the channel
         * @param user The user to check
         * @param chan The channel to check in
         * @return MOD_RES_DENY to mark as banned, MOD_RES_ALLOW to skip the
         * ban check, or MOD_RES_PASSTHRU to check bans normally
         */
        virtual ModResult OnCheckChannelBan(User* user, Channel* chan);

        /**
         * Checks for a user's match of a single ban
         * @param user The user to check for match
         * @param chan The channel on which the match is being checked
         * @param mask The mask being checked
         * @return MOD_RES_DENY to mark as banned, MOD_RES_ALLOW to skip the
         * ban check, or MOD_RES_PASSTHRU to check bans normally
         */
        virtual ModResult OnCheckBan(User* user, Channel* chan, const std::string& mask);

        /** Checks for a match on a given extban type
         * @return MOD_RES_DENY to mark as banned, MOD_RES_ALLOW to skip the
         * ban check, or MOD_RES_PASSTHRU to check bans normally
         */
        virtual ModResult OnExtBanCheck(User* user, Channel* chan, char type);

        /** Called on all /STATS commands
         * This method is triggered for all /STATS use, including stats symbols handled by the core.
         * @param symbol the symbol provided to /STATS
         * @param user the user issuing the /STATS command
         * @param results A string_list to append results into. You should put all your results
         * into this string_list, rather than displaying them directly, so that your handler will
         * work when remote STATS queries are received.
         * @return 1 to block the /STATS from being processed by the core, 0 to allow it
         */
        virtual ModResult OnStats(char symbol, User* user, string_list &results);

        /** Called whenever a change of a local users displayed host is attempted.
         * Return 1 to deny the host change, or 0 to allow it.
         * @param user The user whos host will be changed
         * @param newhost The new hostname
         * @return 1 to deny the host change, 0 to allow
         */
        virtual ModResult OnChangeLocalUserHost(LocalUser* user, const std::string &newhost);

        /** Called whenever a change of a local users GECOS (fullname field) is attempted.
         * return 1 to deny the name change, or 0 to allow it.
         * @param user The user whos GECOS will be changed
         * @param newhost The new GECOS
         * @return 1 to deny the GECOS change, 0 to allow
         */
        virtual ModResult OnChangeLocalUserGECOS(LocalUser* user, const std::string &newhost);

        /** Called before a topic is changed.
         * Return 1 to deny the topic change, 0 to check details on the change, -1 to let it through with no checks
         * As with other 'pre' events, you should only ever block a local event.
         * @param user The user changing the topic
         * @param chan The channels who's topic is being changed
         * @param topic The actual topic text
         * @param 1 to block the topic change, 0 to allow
         */
        virtual ModResult OnPreTopicChange(User* user, Channel* chan, const std::string &topic);

        /** Called whenever a topic has been changed.
         * To block topic changes you must use OnPreTopicChange instead.
         * @param user The user changing the topic
         * @param chan The channels who's topic is being changed
         * @param topic The actual topic text
         */
        virtual void OnPostTopicChange(User* user, Channel* chan, const std::string &topic);

        /** Called whenever an Event class is sent to all modules by another module.
         * You should *always* check the value of Event::id to determine the event type.
         * @param event The Event class being received
         */
        virtual void OnEvent(Event& event);

        /** Called whenever a Request class is sent to your module by another module.
         * The value of Request::id should be used to determine the type of request.
         * @param request The Request class being received
         */
        virtual void OnRequest(Request& request);

        /** Called whenever a password check is to be made. Replaces the old OldOperCompare API.
         * The password field (from the config file) is in 'password' and is to be compared against
         * 'input'. This method allows for encryption of passwords (oper, connect:allow, die/restart, etc).
         * You should return a nonzero value to override the normal comparison, or zero to pass it on.
         * @param ex The object that's causing the authentication (User* for <oper> <connect:allow> etc, Server* for <link>).
         * @param password The password from the configuration file (the password="" value).
         * @param input The password entered by the user or whoever.
         * @param hashtype The hash value from the config
         * @return 0 to do nothing (pass on to next module/default), 1 == password is OK, -1 == password is not OK
         */
        virtual ModResult OnPassCompare(Extensible* ex, const std::string &password, const std::string &input, const std::string& hashtype);

        /** Called whenever a user is given usermode +o, anywhere on the network.
         * You cannot override this and prevent it from happening as it is already happened and
         * such a task must be performed by another server. You can however bounce modes by sending
         * servermodes out to reverse mode changes.
         * @param user The user who is opering
         */
        virtual void OnGlobalOper(User* user);

        /** Called after a user has fully connected and all modules have executed OnUserConnect
         * This event is informational only. You should not change any user information in this
         * event. To do so, use the OnUserConnect method to change the state of local users.
         * This is called for both local and remote users.
         * @param user The user who is connecting
         */
        virtual void OnPostConnect(User* user);

        /** Called whenever a ban is added to a channel's list.
         * Return a non-zero value to 'eat' the mode change and prevent the ban from being added.
         * @param source The user adding the ban
         * @param channel The channel the ban is being added to
         * @param banmask The ban mask being added
         * @return 1 to block the ban, 0 to continue as normal
         */
        virtual ModResult OnAddBan(User* source, Channel* channel,const std::string &banmask);

        /** Called whenever a ban is removed from a channel's list.
         * Return a non-zero value to 'eat' the mode change and prevent the ban from being removed.
         * @param source The user deleting the ban
         * @param channel The channel the ban is being deleted from
         * @param banmask The ban mask being deleted
         * @return 1 to block the unban, 0 to continue as normal
         */
        virtual ModResult OnDelBan(User* source, Channel* channel,const std::string &banmask);

        /** Called to install an I/O hook on an event handler
         * @param user The item to possibly install the I/O hook on
         * @param via The port that <user> connected on
         */
        virtual void OnHookIO(StreamSocket*, ListenSocket* via);

        /** Called when a port accepts a connection
         * Return MOD_RES_ACCEPT if you have used the file descriptor.
         * @param fd The file descriptor returned from accept()
         * @param from The local port the user connected to
         * @param client The client IP address and port
         * @param server The server IP address and port
         */
        virtual ModResult OnAcceptConnection(int fd, ListenSocket* from, irc::sockets::sockaddrs* client, irc::sockets::sockaddrs* server);

        /** Called immediately after any connection is accepted. This is intended for raw socket
         * processing (e.g. modules which wrap the tcp connection within another library) and provides
         * no information relating to a user record as the connection has not been assigned yet.
         * There are no return values from this call as all modules get an opportunity if required to
         * process the connection.
         * @param fd The file descriptor returned from accept()
         * @param client The client IP address and port
         * @param server The server IP address and port
         * @param localport The local port number the user connected to
         */
        virtual void OnStreamSocketAccept(StreamSocket*, irc::sockets::sockaddrs* client, irc::sockets::sockaddrs* server);

        /**
         * Called when a hooked stream has data to write, or when the socket
         * engine returns it as writable
         * @param socket The socket in question
         * @param sendq Data to send to the socket
         * @return 1 if the sendq has been completely emptied, 0 if there is
         *  still data to send, and -1 if there was an error
         */
        virtual int OnStreamSocketWrite(StreamSocket*, std::string& sendq);

        /** Called immediately before any socket is closed. When this event is called, shutdown()
         * has not yet been called on the socket.
         * @param fd The file descriptor of the socket prior to close()
         */
        virtual void OnStreamSocketClose(StreamSocket*);

        /** Called immediately upon connection of an outbound BufferedSocket which has been hooked
         * by a module.
         * @param fd The file descriptor of the socket immediately after connect()
         */
        virtual void OnStreamSocketConnect(StreamSocket*);

        /**
         * Called when the stream socket has data to read
         * @param socket The socket that is ready
         * @param recvq The receive queue that new data should be appended to
         * @return 1 if new data has been read, 0 if no new data is ready (but the
         *  socket is still connected), -1 if there was an error or close
         */
        virtual int OnStreamSocketRead(StreamSocket*, std::string& recvq);

        /** Called whenever a user sets away or returns from being away.
         * The away message is available as a parameter, but should not be modified.
         * At this stage, it has already been copied into the user record.
         * If awaymsg is empty, the user is returning from away.
         * @param user The user setting away
         * @param awaymsg The away message of the user, or empty if returning from away
         * @return nonzero if the away message should be blocked - should ONLY be nonzero for LOCAL users (IS_LOCAL) (no output is returned by core)
         */
        virtual ModResult OnSetAway(User* user, const std::string &awaymsg);

        /** Called whenever a NAMES list is requested.
         * You can produce the nameslist yourself, overriding the current list,
         * and if you do you must return 1. If you do not handle the names list,
         * return 0.
         * @param The user requesting the NAMES list
         * @param Ptr The channel the NAMES list is requested for
         */
        virtual ModResult OnUserList(User* user, Channel* Ptr);

        /** Called whenever a line of WHOIS output is sent to a user.
         * You may change the numeric and the text of the output by changing
         * the values numeric and text, but you cannot change the user the
         * numeric is sent to. You may however change the user's User values.
         * @param user The user the numeric is being sent to
         * @param dest The user being WHOISed
         * @param numeric The numeric of the line being sent
         * @param text The text of the numeric, including any parameters
         * @return nonzero to drop the line completely so that the user does not
         * receive it, or zero to allow the line to be sent.
         */
        virtual ModResult OnWhoisLine(User* user, User* dest, int &numeric, std::string &text);

        /** Called at intervals for modules to garbage-collect any hashes etc.
         * Certain data types such as hash_map 'leak' buckets, which must be
         * tidied up and freed by copying into a new item every so often. This
         * method is called when it is time to do that.
         */
        virtual void OnGarbageCollect();

        /** Add test suite hooks here. These are used for testing functionality of a module
         * via the --testsuite debugging parameter.
         */
        virtual void OnRunTestSuite();

        /** Called for every item in a NAMES list, so that modules may reformat portions of it as they see fit.
         * For example NAMESX, channel mode +u and +I, and UHNAMES. If the nick is set to an empty string by any
         * module, then this will cause the nickname not to be displayed at all.
         */
        virtual void OnNamesListItem(User* issuer, Membership* item, std::string &prefixes, std::string &nick);

        virtual ModResult OnNumeric(User* user, unsigned int numeric, const std::string &text);

        /** Called whenever a result from /WHO is about to be returned
         * @param source The user running the /WHO query
         * @param user The user that this line of the query is about
         * @param channel The channel being queried (or NULL if not a channel query)
         * @param line The raw line to send; modifiable, if empty no line will be returned.
         */
        virtual void OnSendWhoLine(User* source, User* user, Channel* channel, std::string& line);

        /** Called to check whether a channel restriction mode applies to a user on it
         * @return MOD_RES_DENY to apply the restriction, MOD_RES_ALLOW to bypass
         * the restriction, or MOD_RES_PASSTHRU to check restriction status normally
         */
        virtual ModResult OnChannelRestrictionApply(User* user, Channel* chan, const char* restriction);
};


#define CONF_NO_ERROR           0x000000
#define CONF_NOT_A_NUMBER       0x000010
#define CONF_INT_NEGATIVE       0x000080
#define CONF_VALUE_NOT_FOUND    0x000100
#define CONF_FILE_NOT_FOUND     0x000200


/** Allows reading of values from configuration files
 * This class allows a module to read from either the main configuration file (inspircd.conf) or from
 * a module-specified configuration file. It may either be instantiated with one parameter or none.
 * Constructing the class using one parameter allows you to specify a path to your own configuration
 * file, otherwise, inspircd.conf is read.
 */
class CoreExport ConfigReader : public interfacebase
{
  protected:
        /** Error code
         */
        long error;

  public:
        /** Default constructor.
         * This constructor initialises the ConfigReader class to read the inspircd.conf file
         * as specified when running ./configure.
         */
        ConfigReader();
        /** Default destructor.
         * This method destroys the ConfigReader class.
         */
        ~ConfigReader();

        /** Retrieves a value from the config file.
         * This method retrieves a value from the config file. Where multiple copies of the tag
         * exist in the config file, index indicates which of the values to retrieve.
         */
        std::string ReadValue(const std::string &tag, const std::string &name, int index, bool allow_linefeeds = false);
        /** Retrieves a value from the config file.
         * This method retrieves a value from the config file. Where multiple copies of the tag
         * exist in the config file, index indicates which of the values to retrieve. If the
         * tag is not found the default value is returned instead.
         */
        std::string ReadValue(const std::string &tag, const std::string &name, const std::string &default_value, int index, bool allow_linefeeds = false);

        /** Retrieves a boolean value from the config file.
         * This method retrieves a boolean value from the config file. Where multiple copies of the tag
         * exist in the config file, index indicates which of the values to retrieve. The values "1", "yes"
         * and "true" in the config file count as true to ReadFlag, and any other value counts as false.
         */
        bool ReadFlag(const std::string &tag, const std::string &name, int index);
        /** Retrieves a boolean value from the config file.
         * This method retrieves a boolean value from the config file. Where multiple copies of the tag
         * exist in the config file, index indicates which of the values to retrieve. The values "1", "yes"
         * and "true" in the config file count as true to ReadFlag, and any other value counts as false.
         * If the tag is not found, the default value is used instead.
         */
        bool ReadFlag(const std::string &tag, const std::string &name, const std::string &default_value, int index);

        /** Retrieves an integer value from the config file.
         * This method retrieves an integer value from the config file. Where multiple copies of the tag
         * exist in the config file, index indicates which of the values to retrieve. Any invalid integer
         * values in the tag will cause the objects error value to be set, and any call to GetError() will
         * return CONF_INVALID_NUMBER to be returned. need_positive is set if the number must be non-negative.
         * If a negative number is placed into a tag which is specified positive, 0 will be returned and GetError()
         * will return CONF_INT_NEGATIVE. Note that need_positive is not suitable to get an unsigned int - you
         * should cast the result to achieve that effect.
         */
        int ReadInteger(const std::string &tag, const std::string &name, int index, bool need_positive);
        /** Retrieves an integer value from the config file.
         * This method retrieves an integer value from the config file. Where multiple copies of the tag
         * exist in the config file, index indicates which of the values to retrieve. Any invalid integer
         * values in the tag will cause the objects error value to be set, and any call to GetError() will
         * return CONF_INVALID_NUMBER to be returned. needs_unsigned is set if the number must be unsigned.
         * If a signed number is placed into a tag which is specified unsigned, 0 will be returned and GetError()
         * will return CONF_NOT_UNSIGNED. If the tag is not found, the default value is used instead.
         */
        int ReadInteger(const std::string &tag, const std::string &name, const std::string &default_value, int index, bool need_positive);

        /** Returns the last error to occur.
         * Valid errors can be found by looking in modules.h. Any nonzero value indicates an error condition.
         * A call to GetError() resets the error flag back to 0.
         */
        long GetError();

        /** Counts the number of times a given tag appears in the config file.
         * This method counts the number of times a tag appears in a config file, for use where
         * there are several tags of the same kind, e.g. with opers and connect types. It can be
         * used with the index value of ConfigReader::ReadValue to loop through all copies of a
         * multiple instance tag.
         */
        int Enumerate(const std::string &tag);
};



/** Caches a text file into memory and can be used to retrieve lines from it.
 * This class contains methods for read-only manipulation of a text file in memory.
 * Either use the constructor type with one parameter to load a file into memory
 * at construction, or use the LoadFile method to load a file.
 */
class CoreExport FileReader : public classbase
{
        /** The file contents
         */
        std::vector<std::string> fc;

        /** Content size in bytes
         */
        unsigned long contentsize;

        /** Calculate content size in bytes
         */
        void CalcSize();

 public:
        /** Default constructor.
         * This method does not load any file into memory, you must use the LoadFile method
         * after constructing the class this way.
         */
        FileReader();

        /** Secondary constructor.
         * This method initialises the class with a file loaded into it ready for GetLine and
         * and other methods to be called. If the file could not be loaded, FileReader::FileSize
         * returns 0.
         */
        FileReader(const std::string &filename);

        /** Default destructor.
         * This deletes the memory allocated to the file.
         */
        ~FileReader();

        /** Used to load a file.
         * This method loads a file into the class ready for GetLine and
         * and other methods to be called. If the file could not be loaded, FileReader::FileSize
         * returns 0.
         */
        void LoadFile(const std::string &filename);

        /** Returns the whole content of the file as std::string
         */
        std::string Contents();

        /** Returns the entire size of the file as std::string
         */
        unsigned long ContentSize();

        /** Returns true if the file exists
         * This function will return false if the file could not be opened.
         */
        bool Exists();

        /** Retrieve one line from the file.
         * This method retrieves one line from the text file. If an empty non-NULL string is returned,
         * the index was out of bounds, or the line had no data on it.
         */
        std::string GetLine(int x);

        /** Returns the size of the file in lines.
         * This method returns the number of lines in the read file. If it is 0, no lines have been
         * read into memory, either because the file is empty or it does not exist, or cannot be
         * opened due to permission problems.
         */
        int FileSize();
};

/** A list of modules
 */
typedef std::vector<Module*> IntModuleList;

/** An event handler iterator
 */
typedef IntModuleList::iterator EventHandlerIter;

/** ModuleManager takes care of all things module-related
 * in the core.
 */
class CoreExport ModuleManager
{
 private:
        /** Holds a string describing the last module error to occur
         */
        std::string LastModuleError;

        /** Total number of modules loaded into the ircd
         */
        int ModCount;

        /** List of loaded modules and shared object/dll handles
         * keyed by module name
         */
        std::map<std::string, Module*> Modules;

        enum {
                PRIO_STATE_FIRST,
                PRIO_STATE_AGAIN,
                PRIO_STATE_LAST
        } prioritizationState;

        /** Internal unload module hook */
        bool CanUnload(Module*);
 public:

        /** Event handler hooks.
         * This needs to be public to be used by FOREACH_MOD and friends.
         */
        IntModuleList EventHandlers[I_END];

        /** List of data services keyed by name */
        std::multimap<std::string, ServiceProvider*> DataProviders;

        /** List of all dynamic references that are currently active */
        std::vector<dynamic_reference_base*> ActiveDynrefs;

        /** Simple, bog-standard, boring constructor.
         */
        ModuleManager();

        /** Destructor
         */
        ~ModuleManager();

        /** Change the priority of one event in a module.
         * Each module event has a list of modules which are attached to that event type.
         * If you wish to be called before or after other specific modules, you may use this
         * method (usually within void Module::Prioritize()) to set your events priority.
         * You may use this call in other methods too, however, this is not supported behaviour
         * for a module.
         * @param mod The module to change the priority of
         * @param i The event to change the priority of
         * @param s The state you wish to use for this event. Use one of
         * PRIO_FIRST to set the event to be first called, PRIO_LAST to
         * set it to be the last called, or PRIO_BEFORE and PRIORITY_AFTER
         * to set it to be before or after one or more other modules.
         * @param modules If PRIO_BEFORE or PRIORITY_AFTER is set in parameter 's',
         * then this contains a list of one or more modules your module must be
         * placed before or after. Your module will be placed before the highest
         * priority module in this list for PRIO_BEFORE, or after the lowest
         * priority module in this list for PRIORITY_AFTER.
         * @param sz The number of modules being passed for PRIO_BEFORE and PRIORITY_AFTER.
         * Defaults to 1, as most of the time you will only want to prioritize your module
         * to be before or after one other module.
         */
        bool SetPriority(Module* mod, Implementation i, Priority s, Module** modules = NULL, size_t sz = 1);

        /** Change the priority of all events in a module.
         * @param mod The module to set the priority of
         * @param s The priority of all events in the module.
         * Note that with this method, it is not possible to effectively use
         * PRIO_BEFORE or PRIORITY_AFTER, you should use the more fine tuned
         * SetPriority method for this, where you may specify other modules to
         * be prioritized against.
         */
        bool SetPriority(Module* mod, Priority s);

        /** Attach an event to a module.
         * You may later detatch the event with ModuleManager::Detach().
         * If your module is unloaded, all events are automatically detatched.
         * @param i Event type to attach
         * @param mod Module to attach event to
         * @return True if the event was attached
         */
        bool Attach(Implementation i, Module* mod);

        /** Detatch an event from a module.
         * This is not required when your module unloads, as the core will
         * automatically detatch your module from all events it is attached to.
         * @param i Event type to detach
         * @param mod Module to detach event from
         * @param Detach true if the event was detached
         */
        bool Detach(Implementation i, Module* mod);

        /** Attach an array of events to a module
         * @param i Event types (array) to attach
         * @param mod Module to attach events to
         */
        void Attach(Implementation* i, Module* mod, size_t sz);

        /** Detach all events from a module (used on unload)
         * @param mod Module to detach from
         */
        void DetachAll(Module* mod);

        /** Returns text describing the last module error
         * @return The last error message to occur
         */
        std::string& LastError();

        /** Load a given module file
         * @param filename The file to load
         * @return True if the module was found and loaded
         */
        bool Load(const char* filename);

        /** Unload a given module file. Note that the module will not be
         * completely gone until the cull list has finished processing.
         *
         * @return true on success; if false, LastError will give a reason
         */
        bool Unload(Module* module);

        /** Run an asynchronous reload of the given module. When the reload is
         * complete, the callback will be run with true if the reload succeeded
         * and false if it did not.
         */
        void Reload(Module* module, HandlerBase1<void, bool>* callback);

        /** Called by the InspIRCd constructor to load all modules from the config file.
         */
        void LoadAll();
        void UnloadAll();
        void DoSafeUnload(Module*);

        /** Get the total number of currently loaded modules
         * @return The number of loaded modules
         */
        int GetCount()
        {
                return this->ModCount;
        }

        /** Find a module by name, and return a Module* to it.
         * This is preferred over iterating the module lists yourself.
         * @param name The module name to look up
         * @return A pointer to the module, or NULL if the module cannot be found
         */
        Module* Find(const std::string &name);

        /** Register a service provided by a module */
        void AddService(ServiceProvider&);

        inline void AddServices(ServiceProvider** list, int count)
        {
                for(int i=0; i < count; i++)
                        AddService(*list[i]);
        }

        /** Find a service by name.
         * If multiple modules provide a given service, the first one loaded will be chosen.
         */
        ServiceProvider* FindService(ServiceType Type, const std::string& name);

        template<typename T> inline T* FindDataService(const std::string& name)
        {
                return static_cast<T*>(FindService(SERVICE_DATA, name));
        }

        /** Return a list of all modules matching the given filter
         * @param filter This int is a bitmask of flags set in Module::Flags,
         * such as VF_VENDOR or VF_STATIC. If you wish to receive a list of
         * all modules with no filtering, set this to 0.
         * @return The list of module names
         */
        const std::vector<std::string> GetAllModuleNames(int filter);
};

/** Do not mess with these functions unless you know the C preprocessor
 * well enough to explain why they are needed. The order is important.
 */
#define MODULE_INIT_STR MODULE_INIT_STR_FN_2(MODULE_INIT_SYM)
#define MODULE_INIT_STR_FN_2(x) MODULE_INIT_STR_FN_1(x)
#define MODULE_INIT_STR_FN_1(x) #x
#define MODULE_INIT_SYM MODULE_INIT_SYM_FN_2(API_VERSION)
#define MODULE_INIT_SYM_FN_2(x) MODULE_INIT_SYM_FN_1(x)
#define MODULE_INIT_SYM_FN_1(x) inspircd_module_ ## x

#ifdef PURE_STATIC

struct AllCommandList {
        typedef Command* (*fn)(Module*);
        AllCommandList(fn cmd);
};
#define COMMAND_INIT(x) static Command* MK_ ## x(Module* m) { return new x(m); } \
        static const AllCommandList PREP_ ## x(&MK_ ## x);

struct AllModuleList {
        typedef Module* (*fn)();
        fn init;
        std::string name;
        AllModuleList(fn mod, const std::string& Name);
};

#define MODULE_INIT(x) static Module* MK_ ## x() { return new x; } \
        static const AllModuleList PREP_ ## x(&MK_ ## x, #x);


#else

/** This definition is used as shorthand for the various classes
 * and functions needed to make a module loadable by the OS.
 * It defines the class factory and external init_module function.
 */
#ifdef WINDOWS

#define MODULE_INIT(y) \
        extern "C" DllExport Module * MODULE_INIT_SYM() \
        { \
                return new y; \
        } \
        BOOLEAN WINAPI DllMain(HINSTANCE hDllHandle, DWORD nReason, LPVOID Reserved) \
        { \
                switch ( nReason ) \
                { \
                        case DLL_PROCESS_ATTACH: \
                        case DLL_PROCESS_DETACH: \
                                break; \
                } \
                return TRUE; \
        }

#else

#define MODULE_INIT(y) \
        extern "C" DllExport Module * MODULE_INIT_SYM() \
        { \
                return new y; \
        }
#endif

#define COMMAND_INIT(c) MODULE_INIT(CommandModule<c>)

#endif

#endif