1 /* $Cambridge: exim/src/src/exim.c,v 1.71 2010/06/07 00:12:42 pdp Exp $ */
3 /*************************************************
4 * Exim - an Internet mail transport agent *
5 *************************************************/
7 /* Copyright (c) University of Cambridge 1995 - 2009 */
8 /* See the file NOTICE for conditions of use and distribution. */
11 /* The main function: entry point, initialization, and high-level control.
12 Also a few functions that don't naturally fit elsewhere. */
19 /*************************************************
20 * Function interface to store functions *
21 *************************************************/
23 /* We need some real functions to pass to the PCRE regular expression library
24 for store allocation via Exim's store manager. The normal calls are actually
25 macros that pass over location information to make tracing easier. These
26 functions just interface to the standard macro calls. A good compiler will
27 optimize out the tail recursion and so not make them too expensive. There
28 are two sets of functions; one for use when we want to retain the compiled
29 regular expression for a long time; the other for short-term use. */
32 function_store_get(size_t size)
34 return store_get((int)size);
38 function_dummy_free(void *block) { block = block; }
41 function_store_malloc(size_t size)
43 return store_malloc((int)size);
47 function_store_free(void *block)
55 /*************************************************
56 * Compile regular expression and panic on fail *
57 *************************************************/
59 /* This function is called when failure to compile a regular expression leads
60 to a panic exit. In other cases, pcre_compile() is called directly. In many
61 cases where this function is used, the results of the compilation are to be
62 placed in long-lived store, so we temporarily reset the store management
63 functions that PCRE uses if the use_malloc flag is set.
66 pattern the pattern to compile
67 caseless TRUE if caseless matching is required
68 use_malloc TRUE if compile into malloc store
70 Returns: pointer to the compiled pattern
74 regex_must_compile(uschar *pattern, BOOL caseless, BOOL use_malloc)
77 int options = PCRE_COPT;
82 pcre_malloc = function_store_malloc;
83 pcre_free = function_store_free;
85 if (caseless) options |= PCRE_CASELESS;
86 yield = pcre_compile(CS pattern, options, (const char **)&error, &offset, NULL);
87 pcre_malloc = function_store_get;
88 pcre_free = function_dummy_free;
90 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "regular expression error: "
91 "%s at offset %d while compiling %s", error, offset, pattern);
98 /*************************************************
99 * Execute regular expression and set strings *
100 *************************************************/
102 /* This function runs a regular expression match, and sets up the pointers to
103 the matched substrings.
106 re the compiled expression
107 subject the subject string
108 options additional PCRE options
109 setup if < 0 do full setup
110 if >= 0 setup from setup+1 onwards,
111 excluding the full matched string
113 Returns: TRUE or FALSE
117 regex_match_and_setup(const pcre *re, uschar *subject, int options, int setup)
119 int ovector[3*(EXPAND_MAXN+1)];
120 int n = pcre_exec(re, NULL, CS subject, Ustrlen(subject), 0,
121 PCRE_EOPT | options, ovector, sizeof(ovector)/sizeof(int));
123 if (n == 0) n = EXPAND_MAXN + 1;
127 expand_nmax = (setup < 0)? 0 : setup + 1;
128 for (nn = (setup < 0)? 0 : 2; nn < n*2; nn += 2)
130 expand_nstring[expand_nmax] = subject + ovector[nn];
131 expand_nlength[expand_nmax++] = ovector[nn+1] - ovector[nn];
141 /*************************************************
142 * Handler for SIGUSR1 *
143 *************************************************/
145 /* SIGUSR1 causes any exim process to write to the process log details of
146 what it is currently doing. It will only be used if the OS is capable of
147 setting up a handler that causes automatic restarting of any system call
148 that is in progress at the time.
150 Argument: the signal number (SIGUSR1)
155 usr1_handler(int sig)
157 sig = sig; /* Keep picky compilers happy */
158 log_write(0, LOG_PROCESS, "%s", process_info);
160 os_restarting_signal(SIGUSR1, usr1_handler);
165 /*************************************************
167 *************************************************/
169 /* This handler is enabled most of the time that Exim is running. The handler
170 doesn't actually get used unless alarm() has been called to set a timer, to
171 place a time limit on a system call of some kind. When the handler is run, it
174 There are some other SIGALRM handlers that are used in special cases when more
175 than just a flag setting is required; for example, when reading a message's
176 input. These are normally set up in the code module that uses them, and the
177 SIGALRM handler is reset to this one afterwards.
179 Argument: the signal value (SIGALRM)
184 sigalrm_handler(int sig)
186 sig = sig; /* Keep picky compilers happy */
188 os_non_restarting_signal(SIGALRM, sigalrm_handler);
193 /*************************************************
194 * Sleep for a fractional time interval *
195 *************************************************/
197 /* This function is called by millisleep() and exim_wait_tick() to wait for a
198 period of time that may include a fraction of a second. The coding is somewhat
199 tedious. We do not expect setitimer() ever to fail, but if it does, the process
200 will wait for ever, so we panic in this instance. (There was a case of this
201 when a bug in a function that calls milliwait() caused it to pass invalid data.
202 That's when I added the check. :-)
204 Argument: an itimerval structure containing the interval
209 milliwait(struct itimerval *itval)
212 sigset_t old_sigmask;
213 (void)sigemptyset(&sigmask); /* Empty mask */
214 (void)sigaddset(&sigmask, SIGALRM); /* Add SIGALRM */
215 (void)sigprocmask(SIG_BLOCK, &sigmask, &old_sigmask); /* Block SIGALRM */
216 if (setitimer(ITIMER_REAL, itval, NULL) < 0) /* Start timer */
217 log_write(0, LOG_MAIN|LOG_PANIC_DIE,
218 "setitimer() failed: %s", strerror(errno));
219 (void)sigfillset(&sigmask); /* All signals */
220 (void)sigdelset(&sigmask, SIGALRM); /* Remove SIGALRM */
221 (void)sigsuspend(&sigmask); /* Until SIGALRM */
222 (void)sigprocmask(SIG_SETMASK, &old_sigmask, NULL); /* Restore mask */
228 /*************************************************
229 * Millisecond sleep function *
230 *************************************************/
232 /* The basic sleep() function has a granularity of 1 second, which is too rough
233 in some cases - for example, when using an increasing delay to slow down
236 Argument: number of millseconds
243 struct itimerval itval;
244 itval.it_interval.tv_sec = 0;
245 itval.it_interval.tv_usec = 0;
246 itval.it_value.tv_sec = msec/1000;
247 itval.it_value.tv_usec = (msec % 1000) * 1000;
253 /*************************************************
254 * Compare microsecond times *
255 *************************************************/
262 Returns: -1, 0, or +1
266 exim_tvcmp(struct timeval *t1, struct timeval *t2)
268 if (t1->tv_sec > t2->tv_sec) return +1;
269 if (t1->tv_sec < t2->tv_sec) return -1;
270 if (t1->tv_usec > t2->tv_usec) return +1;
271 if (t1->tv_usec < t2->tv_usec) return -1;
278 /*************************************************
279 * Clock tick wait function *
280 *************************************************/
282 /* Exim uses a time + a pid to generate a unique identifier in two places: its
283 message IDs, and in file names for maildir deliveries. Because some OS now
284 re-use pids within the same second, sub-second times are now being used.
285 However, for absolute certaintly, we must ensure the clock has ticked before
286 allowing the relevant process to complete. At the time of implementation of
287 this code (February 2003), the speed of processors is such that the clock will
288 invariably have ticked already by the time a process has done its job. This
289 function prepares for the time when things are faster - and it also copes with
290 clocks that go backwards.
293 then_tv A timeval which was used to create uniqueness; its usec field
294 has been rounded down to the value of the resolution.
295 We want to be sure the current time is greater than this.
296 resolution The resolution that was used to divide the microseconds
297 (1 for maildir, larger for message ids)
303 exim_wait_tick(struct timeval *then_tv, int resolution)
305 struct timeval now_tv;
306 long int now_true_usec;
308 (void)gettimeofday(&now_tv, NULL);
309 now_true_usec = now_tv.tv_usec;
310 now_tv.tv_usec = (now_true_usec/resolution) * resolution;
312 if (exim_tvcmp(&now_tv, then_tv) <= 0)
314 struct itimerval itval;
315 itval.it_interval.tv_sec = 0;
316 itval.it_interval.tv_usec = 0;
317 itval.it_value.tv_sec = then_tv->tv_sec - now_tv.tv_sec;
318 itval.it_value.tv_usec = then_tv->tv_usec + resolution - now_true_usec;
320 /* We know that, overall, "now" is less than or equal to "then". Therefore, a
321 negative value for the microseconds is possible only in the case when "now"
322 is more than a second less than "then". That means that itval.it_value.tv_sec
323 is greater than zero. The following correction is therefore safe. */
325 if (itval.it_value.tv_usec < 0)
327 itval.it_value.tv_usec += 1000000;
328 itval.it_value.tv_sec -= 1;
331 DEBUG(D_transport|D_receive)
333 if (!running_in_test_harness)
335 debug_printf("tick check: %lu.%06lu %lu.%06lu\n",
336 then_tv->tv_sec, then_tv->tv_usec, now_tv.tv_sec, now_tv.tv_usec);
337 debug_printf("waiting %lu.%06lu\n", itval.it_value.tv_sec,
338 itval.it_value.tv_usec);
349 /*************************************************
350 * Set up processing details *
351 *************************************************/
353 /* Save a text string for dumping when SIGUSR1 is received.
354 Do checks for overruns.
356 Arguments: format and arguments, as for printf()
361 set_process_info(char *format, ...)
365 sprintf(CS process_info, "%5d ", (int)getpid());
366 len = Ustrlen(process_info);
367 va_start(ap, format);
368 if (!string_vformat(process_info + len, PROCESS_INFO_SIZE - len, format, ap))
369 Ustrcpy(process_info + len, "**** string overflowed buffer ****");
370 DEBUG(D_process_info) debug_printf("set_process_info: %s\n", process_info);
378 /*************************************************
379 * Call fopen() with umask 777 and adjust mode *
380 *************************************************/
382 /* Exim runs with umask(0) so that files created with open() have the mode that
383 is specified in the open() call. However, there are some files, typically in
384 the spool directory, that are created with fopen(). They end up world-writeable
385 if no precautions are taken. Although the spool directory is not accessible to
386 the world, this is an untidiness. So this is a wrapper function for fopen()
387 that sorts out the mode of the created file.
390 filename the file name
391 options the fopen() options
392 mode the required mode
394 Returns: the fopened FILE or NULL
398 modefopen(uschar *filename, char *options, mode_t mode)
400 mode_t saved_umask = umask(0777);
401 FILE *f = Ufopen(filename, options);
402 (void)umask(saved_umask);
403 if (f != NULL) (void)fchmod(fileno(f), mode);
410 /*************************************************
411 * Ensure stdin, stdout, and stderr exist *
412 *************************************************/
414 /* Some operating systems grumble if an exec() happens without a standard
415 input, output, and error (fds 0, 1, 2) being defined. The worry is that some
416 file will be opened and will use these fd values, and then some other bit of
417 code will assume, for example, that it can write error messages to stderr.
418 This function ensures that fds 0, 1, and 2 are open if they do not already
419 exist, by connecting them to /dev/null.
421 This function is also used to ensure that std{in,out,err} exist at all times,
422 so that if any library that Exim calls tries to use them, it doesn't crash.
434 for (i = 0; i <= 2; i++)
436 if (fstat(i, &statbuf) < 0 && errno == EBADF)
438 if (devnull < 0) devnull = open("/dev/null", O_RDWR);
439 if (devnull < 0) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s",
440 string_open_failed(errno, "/dev/null"));
441 if (devnull != i) (void)dup2(devnull, i);
444 if (devnull > 2) (void)close(devnull);
450 /*************************************************
451 * Close unwanted file descriptors for delivery *
452 *************************************************/
454 /* This function is called from a new process that has been forked to deliver
455 an incoming message, either directly, or using exec.
457 We want any smtp input streams to be closed in this new process. However, it
458 has been observed that using fclose() here causes trouble. When reading in -bS
459 input, duplicate copies of messages have been seen. The files will be sharing a
460 file pointer with the parent process, and it seems that fclose() (at least on
461 some systems - I saw this on Solaris 2.5.1) messes with that file pointer, at
462 least sometimes. Hence we go for closing the underlying file descriptors.
464 If TLS is active, we want to shut down the TLS library, but without molesting
465 the parent's SSL connection.
467 For delivery of a non-SMTP message, we want to close stdin and stdout (and
468 stderr unless debugging) because the calling process might have set them up as
469 pipes and be waiting for them to close before it waits for the submission
470 process to terminate. If they aren't closed, they hold up the calling process
471 until the initial delivery process finishes, which is not what we want.
473 Exception: We do want it for synchronous delivery!
475 And notwithstanding all the above, if D_resolver is set, implying resolver
476 debugging, leave stdout open, because that's where the resolver writes its
479 When we close stderr (which implies we've also closed stdout), we also get rid
480 of any controlling terminal.
492 tls_close(FALSE); /* Shut down the TLS library */
494 (void)close(fileno(smtp_in));
495 (void)close(fileno(smtp_out));
500 (void)close(0); /* stdin */
501 if ((debug_selector & D_resolver) == 0) (void)close(1); /* stdout */
502 if (debug_selector == 0) /* stderr */
504 if (!synchronous_delivery)
517 /*************************************************
519 *************************************************/
521 /* This function sets a new uid and gid permanently, optionally calling
522 initgroups() to set auxiliary groups. There are some special cases when running
523 Exim in unprivileged modes. In these situations the effective uid will not be
524 root; if we already have the right effective uid/gid, and don't need to
525 initialize any groups, leave things as they are.
530 igflag TRUE if initgroups() wanted
531 msg text to use in debugging output and failure log
533 Returns: nothing; bombs out on failure
537 exim_setugid(uid_t uid, gid_t gid, BOOL igflag, uschar *msg)
539 uid_t euid = geteuid();
540 gid_t egid = getegid();
542 if (euid == root_uid || euid != uid || egid != gid || igflag)
544 /* At least one OS returns +1 for initgroups failure, so just check for
549 struct passwd *pw = getpwuid(uid);
552 if (initgroups(pw->pw_name, gid) != 0)
553 log_write(0,LOG_MAIN|LOG_PANIC_DIE,"initgroups failed for uid=%ld: %s",
554 (long int)uid, strerror(errno));
556 else log_write(0, LOG_MAIN|LOG_PANIC_DIE, "cannot run initgroups(): "
557 "no passwd entry for uid=%ld", (long int)uid);
560 if (setgid(gid) < 0 || setuid(uid) < 0)
562 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "unable to set gid=%ld or uid=%ld "
563 "(euid=%ld): %s", (long int)gid, (long int)uid, (long int)euid, msg);
567 /* Debugging output included uid/gid and all groups */
572 gid_t group_list[NGROUPS_MAX];
573 debug_printf("changed uid/gid: %s\n uid=%ld gid=%ld pid=%ld\n", msg,
574 (long int)geteuid(), (long int)getegid(), (long int)getpid());
575 group_count = getgroups(NGROUPS_MAX, group_list);
576 debug_printf(" auxiliary group list:");
580 for (i = 0; i < group_count; i++) debug_printf(" %d", (int)group_list[i]);
582 else debug_printf(" <none>");
590 /*************************************************
592 *************************************************/
594 /* Exim exits via this function so that it always clears up any open
600 Returns: does not return
608 debug_printf(">>>>>>>>>>>>>>>> Exim pid=%d terminating with rc=%d "
609 ">>>>>>>>>>>>>>>>\n", (int)getpid(), rc);
616 /*************************************************
617 * Extract port from host address *
618 *************************************************/
620 /* Called to extract the port from the values given to -oMa and -oMi.
621 It also checks the syntax of the address, and terminates it before the
622 port data when a port is extracted.
625 address the address, with possible port on the end
627 Returns: the port, or zero if there isn't one
628 bombs out on a syntax error
632 check_port(uschar *address)
634 int port = host_address_extract_port(address);
635 if (string_is_ip_address(address, NULL) == 0)
637 fprintf(stderr, "exim abandoned: \"%s\" is not an IP address\n", address);
645 /*************************************************
646 * Test/verify an address *
647 *************************************************/
649 /* This function is called by the -bv and -bt code. It extracts a working
650 address from a full RFC 822 address. This isn't really necessary per se, but it
651 has the effect of collapsing source routes.
655 flags flag bits for verify_address()
656 exit_value to be set for failures
662 test_address(uschar *s, int flags, int *exit_value)
664 int start, end, domain;
665 uschar *parse_error = NULL;
666 uschar *address = parse_extract_address(s, &parse_error, &start, &end, &domain,
670 fprintf(stdout, "syntax error: %s\n", parse_error);
675 int rc = verify_address(deliver_make_addr(address,TRUE), stdout, flags, -1,
676 -1, -1, NULL, NULL, NULL);
677 if (rc == FAIL) *exit_value = 2;
678 else if (rc == DEFER && *exit_value == 0) *exit_value = 1;
684 /*************************************************
685 * Show supported features *
686 *************************************************/
688 /* This function is called for -bV/--version and for -d to output the optional
689 features of the current Exim binary.
691 Arguments: a FILE for printing
696 show_whats_supported(FILE *f)
698 #ifdef DB_VERSION_STRING
699 fprintf(f, "Berkeley DB: %s\n", DB_VERSION_STRING);
700 #elif defined(BTREEVERSION) && defined(HASHVERSION)
702 fprintf(f, "Probably Berkeley DB version 1.8x (native mode)\n");
704 fprintf(f, "Probably Berkeley DB version 1.8x (compatibility mode)\n");
706 #elif defined(_DBM_RDONLY) || defined(dbm_dirfno)
707 fprintf(f, "Probably ndbm\n");
708 #elif defined(USE_TDB)
709 fprintf(f, "Using tdb\n");
712 fprintf(f, "Probably GDBM (native mode)\n");
714 fprintf(f, "Probably GDBM (compatibility mode)\n");
718 fprintf(f, "Support for:");
719 #ifdef SUPPORT_CRYPTEQ
720 fprintf(f, " crypteq");
723 fprintf(f, " iconv()");
728 #ifdef HAVE_SETCLASSRESOURCES
729 fprintf(f, " use_setclassresources");
738 fprintf(f, " Expand_dlfunc");
740 #ifdef USE_TCP_WRAPPERS
741 fprintf(f, " TCPwrappers");
745 fprintf(f, " GnuTLS");
747 fprintf(f, " OpenSSL");
750 #ifdef SUPPORT_TRANSLATE_IP_ADDRESS
751 fprintf(f, " translate_ip_address");
753 #ifdef SUPPORT_MOVE_FROZEN_MESSAGES
754 fprintf(f, " move_frozen_messages");
756 #ifdef WITH_CONTENT_SCAN
757 fprintf(f, " Content_Scanning");
762 #ifdef WITH_OLD_DEMIME
763 fprintf(f, " Old_Demime");
765 #ifdef EXPERIMENTAL_SPF
766 fprintf(f, " Experimental_SPF");
768 #ifdef EXPERIMENTAL_SRS
769 fprintf(f, " Experimental_SRS");
771 #ifdef EXPERIMENTAL_BRIGHTMAIL
772 fprintf(f, " Experimental_Brightmail");
774 #ifdef EXPERIMENTAL_DCC
775 fprintf(f, " Experimental_DCC");
779 fprintf(f, "Lookups (built-in):");
780 #if defined(LOOKUP_LSEARCH) && LOOKUP_LSEARCH!=2
781 fprintf(f, " lsearch wildlsearch nwildlsearch iplsearch");
783 #if defined(LOOKUP_CDB) && LOOKUP_CDB!=2
786 #if defined(LOOKUP_DBM) && LOOKUP_DBM!=2
787 fprintf(f, " dbm dbmnz");
789 #if defined(LOOKUP_DNSDB) && LOOKUP_DNSDB!=2
790 fprintf(f, " dnsdb");
792 #if defined(LOOKUP_DSEARCH) && LOOKUP_DSEARCH!=2
793 fprintf(f, " dsearch");
795 #if defined(LOOKUP_IBASE) && LOOKUP_IBASE!=2
796 fprintf(f, " ibase");
798 #if defined(LOOKUP_LDAP) && LOOKUP_LDAP!=2
799 fprintf(f, " ldap ldapdn ldapm");
801 #if defined(LOOKUP_MYSQL) && LOOKUP_MYSQL!=2
802 fprintf(f, " mysql");
804 #if defined(LOOKUP_NIS) && LOOKUP_NIS!=2
805 fprintf(f, " nis nis0");
807 #if defined(LOOKUP_NISPLUS) && LOOKUP_NISPLUS!=2
808 fprintf(f, " nisplus");
810 #if defined(LOOKUP_ORACLE) && LOOKUP_ORACLE!=2
811 fprintf(f, " oracle");
813 #if defined(LOOKUP_PASSWD) && LOOKUP_PASSWD!=2
814 fprintf(f, " passwd");
816 #if defined(LOOKUP_PGSQL) && LOOKUP_PGSQL!=2
817 fprintf(f, " pgsql");
819 #if defined(LOOKUP_SQLITE) && LOOKUP_SQLITE!=2
820 fprintf(f, " sqlite");
822 #if defined(LOOKUP_TESTDB) && LOOKUP_TESTDB!=2
823 fprintf(f, " testdb");
825 #if defined(LOOKUP_WHOSON) && LOOKUP_WHOSON!=2
826 fprintf(f, " whoson");
830 fprintf(f, "Authenticators:");
832 fprintf(f, " cram_md5");
834 #ifdef AUTH_CYRUS_SASL
835 fprintf(f, " cyrus_sasl");
838 fprintf(f, " dovecot");
840 #ifdef AUTH_PLAINTEXT
841 fprintf(f, " plaintext");
848 fprintf(f, "Routers:");
850 fprintf(f, " accept");
852 #ifdef ROUTER_DNSLOOKUP
853 fprintf(f, " dnslookup");
855 #ifdef ROUTER_IPLITERAL
856 fprintf(f, " ipliteral");
858 #ifdef ROUTER_IPLOOKUP
859 fprintf(f, " iplookup");
861 #ifdef ROUTER_MANUALROUTE
862 fprintf(f, " manualroute");
864 #ifdef ROUTER_QUERYPROGRAM
865 fprintf(f, " queryprogram");
867 #ifdef ROUTER_REDIRECT
868 fprintf(f, " redirect");
872 fprintf(f, "Transports:");
873 #ifdef TRANSPORT_APPENDFILE
874 fprintf(f, " appendfile");
875 #ifdef SUPPORT_MAILDIR
876 fprintf(f, "/maildir");
878 #ifdef SUPPORT_MAILSTORE
879 fprintf(f, "/mailstore");
885 #ifdef TRANSPORT_AUTOREPLY
886 fprintf(f, " autoreply");
888 #ifdef TRANSPORT_LMTP
891 #ifdef TRANSPORT_PIPE
894 #ifdef TRANSPORT_SMTP
899 if (fixed_never_users[0] > 0)
902 fprintf(f, "Fixed never_users: ");
903 for (i = 1; i <= (int)fixed_never_users[0] - 1; i++)
904 fprintf(f, "%d:", (unsigned int)fixed_never_users[i]);
905 fprintf(f, "%d\n", (unsigned int)fixed_never_users[i]);
908 fprintf(f, "Size of off_t: " SIZE_T_FMT "\n", sizeof(off_t));
910 /* This runtime check is to help diagnose library linkage mismatches which
911 result in segfaults and the like; as such, it's left until the end,
912 just in case. There will still be a "Configuration file is" line still to
915 tls_version_report(f);
922 /*************************************************
923 * Quote a local part *
924 *************************************************/
926 /* This function is used when a sender address or a From: or Sender: header
927 line is being created from the caller's login, or from an authenticated_id. It
928 applies appropriate quoting rules for a local part.
930 Argument: the local part
931 Returns: the local part, quoted if necessary
935 local_part_quote(uschar *lpart)
937 BOOL needs_quote = FALSE;
942 for (t = lpart; !needs_quote && *t != 0; t++)
944 needs_quote = !isalnum(*t) && strchr("!#$%&'*+-/=?^_`{|}~", *t) == NULL &&
945 (*t != '.' || t == lpart || t[1] == 0);
948 if (!needs_quote) return lpart;
951 yield = string_cat(NULL, &size, &ptr, US"\"", 1);
955 uschar *nq = US Ustrpbrk(lpart, "\\\"");
958 yield = string_cat(yield, &size, &ptr, lpart, Ustrlen(lpart));
961 yield = string_cat(yield, &size, &ptr, lpart, nq - lpart);
962 yield = string_cat(yield, &size, &ptr, US"\\", 1);
963 yield = string_cat(yield, &size, &ptr, nq, 1);
967 yield = string_cat(yield, &size, &ptr, US"\"", 1);
975 /*************************************************
976 * Load readline() functions *
977 *************************************************/
979 /* This function is called from testing executions that read data from stdin,
980 but only when running as the calling user. Currently, only -be does this. The
981 function loads the readline() function library and passes back the functions.
982 On some systems, it needs the curses library, so load that too, but try without
983 it if loading fails. All this functionality has to be requested at build time.
986 fn_readline_ptr pointer to where to put the readline pointer
987 fn_addhist_ptr pointer to where to put the addhistory function
989 Returns: the dlopen handle or NULL on failure
993 set_readline(char * (**fn_readline_ptr)(char *),
994 char * (**fn_addhist_ptr)(char *))
997 void *dlhandle_curses = dlopen("libcurses.so", RTLD_GLOBAL|RTLD_LAZY);
999 dlhandle = dlopen("libreadline.so", RTLD_GLOBAL|RTLD_NOW);
1000 if (dlhandle_curses != NULL) dlclose(dlhandle_curses);
1002 if (dlhandle != NULL)
1004 *fn_readline_ptr = (char *(*)(char*))dlsym(dlhandle, "readline");
1005 *fn_addhist_ptr = (char *(*)(char*))dlsym(dlhandle, "add_history");
1009 DEBUG(D_any) debug_printf("failed to load readline: %s\n", dlerror());
1018 /*************************************************
1019 * Get a line from stdin for testing things *
1020 *************************************************/
1022 /* This function is called when running tests that can take a number of lines
1023 of input (for example, -be and -bt). It handles continuations and trailing
1024 spaces. And prompting and a blank line output on eof. If readline() is in use,
1025 the arguments are non-NULL and provide the relevant functions.
1028 fn_readline readline function or NULL
1029 fn_addhist addhist function or NULL
1031 Returns: pointer to dynamic memory, or NULL at end of file
1035 get_stdinput(char *(*fn_readline)(char *), char *(*fn_addhist)(char *))
1040 uschar *yield = NULL;
1042 if (fn_readline == NULL) { printf("> "); fflush(stdout); }
1046 uschar buffer[1024];
1050 char *readline_line = NULL;
1051 if (fn_readline != NULL)
1053 if ((readline_line = fn_readline((i > 0)? "":"> ")) == NULL) break;
1054 if (*readline_line != 0 && fn_addhist != NULL) fn_addhist(readline_line);
1055 p = US readline_line;
1060 /* readline() not in use */
1063 if (Ufgets(buffer, sizeof(buffer), stdin) == NULL) break;
1067 /* Handle the line */
1069 ss = p + (int)Ustrlen(p);
1070 while (ss > p && isspace(ss[-1])) ss--;
1074 while (p < ss && isspace(*p)) p++; /* leading space after cont */
1077 yield = string_cat(yield, &size, &ptr, p, ss - p);
1080 if (fn_readline != NULL) free(readline_line);
1083 if (ss == p || yield[ptr-1] != '\\')
1091 if (yield == NULL) printf("\n");
1097 /*************************************************
1098 * Output usage information for the program *
1099 *************************************************/
1101 /* This function is called when there are no recipients
1102 or a specific --help argument was added.
1105 progname information on what name we were called by
1107 Returns: DOES NOT RETURN
1111 exim_usage(uschar *progname)
1114 /* Handle specific program invocation varients */
1115 if (Ustrcmp(progname, US"-mailq") == 0)
1118 "mailq - list the contents of the mail queue\n\n"
1119 "For a list of options, see the Exim documentation.\n");
1123 /* Generic usage - we output this whatever happens */
1125 "Exim is a Mail Transfer Agent. It is normally called by Mail User Agents,\n"
1126 "not directly from a shell command line. Options and/or arguments control\n"
1127 "what it does when called. For a list of options, see the Exim documentation.\n");
1134 /*************************************************
1135 * Validate that the macros given are okay *
1136 *************************************************/
1138 /* Typically, Exim will drop privileges if macros are supplied. In some
1139 cases, we want to not do so.
1141 Arguments: none (macros is a global)
1142 Returns: true if trusted, false otherwise
1146 macros_trusted(void)
1148 #ifdef WHITELIST_D_MACROS
1150 uschar *whitelisted, *end, *p, **whites, **w;
1151 int white_count, i, n;
1153 BOOL prev_char_item, found;
1158 #ifndef WHITELIST_D_MACROS
1162 /* We only trust -D overrides for some invoking users:
1163 root, the exim run-time user, the optional config owner user.
1164 I don't know why config-owner would be needed, but since they can own the
1165 config files anyway, there's no security risk to letting them override -D. */
1166 if ( ! ((real_uid == root_uid)
1167 || (real_uid == exim_uid)
1168 #ifdef CONFIGURE_OWNER
1169 || (real_uid == config_uid)
1173 debug_printf("macros_trusted rejecting macros for uid %d\n", (int) real_uid);
1177 /* Get a list of macros which are whitelisted */
1178 whitelisted = string_copy_malloc(US WHITELIST_D_MACROS);
1179 prev_char_item = FALSE;
1181 for (p = whitelisted; *p != '\0'; ++p)
1183 if (*p == ':' || isspace(*p))
1188 prev_char_item = FALSE;
1191 if (!prev_char_item)
1192 prev_char_item = TRUE;
1199 whites = store_malloc(sizeof(uschar *) * (white_count+1));
1200 for (p = whitelisted, i = 0; (p != end) && (i < white_count); ++p)
1205 if (i == white_count)
1207 while (*p != '\0' && p < end)
1213 /* The list of macros should be very short. Accept the N*M complexity. */
1214 for (m = macros; m != NULL; m = m->next)
1217 for (w = whites; *w; ++w)
1218 if (Ustrcmp(*w, m->name) == 0)
1225 if (m->replacement == NULL)
1227 len = Ustrlen(m->replacement);
1230 n = pcre_exec(regex_whitelisted_macro, NULL, CS m->replacement, len,
1231 0, PCRE_EOPT, NULL, 0);
1234 if (n != PCRE_ERROR_NOMATCH)
1235 debug_printf("macros_trusted checking %s returned %d\n", m->name, n);
1239 debug_printf("macros_trusted overriden to true by whitelisting\n");
1245 /*************************************************
1246 * Entry point and high-level code *
1247 *************************************************/
1249 /* Entry point for the Exim mailer. Analyse the arguments and arrange to take
1250 the appropriate action. All the necessary functions are present in the one
1251 binary. I originally thought one should split it up, but it turns out that so
1252 much of the apparatus is needed in each chunk that one might as well just have
1253 it all available all the time, which then makes the coding easier as well.
1256 argc count of entries in argv
1257 argv argument strings, with argv[0] being the program name
1259 Returns: EXIT_SUCCESS if terminated successfully
1260 EXIT_FAILURE otherwise, except when a message has been sent
1261 to the sender, and -oee was given
1265 main(int argc, char **cargv)
1267 uschar **argv = USS cargv;
1268 int arg_receive_timeout = -1;
1269 int arg_smtp_receive_timeout = -1;
1270 int arg_error_handling = error_handling;
1271 int filter_sfd = -1;
1272 int filter_ufd = -1;
1275 int list_queue_option = 0;
1277 int msg_action_arg = -1;
1278 int namelen = (argv[0] == NULL)? 0 : Ustrlen(argv[0]);
1279 int queue_only_reason = 0;
1281 int perl_start_option = 0;
1283 int recipients_arg = argc;
1284 int sender_address_domain = 0;
1285 int test_retry_arg = -1;
1286 int test_rewrite_arg = -1;
1287 BOOL arg_queue_only = FALSE;
1288 BOOL bi_option = FALSE;
1289 BOOL checking = FALSE;
1290 BOOL count_queue = FALSE;
1291 BOOL expansion_test = FALSE;
1292 BOOL extract_recipients = FALSE;
1293 BOOL forced_delivery = FALSE;
1294 BOOL f_end_dot = FALSE;
1295 BOOL deliver_give_up = FALSE;
1296 BOOL list_queue = FALSE;
1297 BOOL list_options = FALSE;
1298 BOOL local_queue_only;
1300 BOOL one_msg_action = FALSE;
1301 BOOL queue_only_set = FALSE;
1302 BOOL receiving_message = TRUE;
1303 BOOL sender_ident_set = FALSE;
1304 BOOL session_local_queue_only;
1306 BOOL removed_privilege = FALSE;
1307 BOOL usage_wanted = FALSE;
1308 BOOL verify_address_mode = FALSE;
1309 BOOL verify_as_sender = FALSE;
1310 BOOL version_printed = FALSE;
1311 uschar *alias_arg = NULL;
1312 uschar *called_as = US"";
1313 uschar *start_queue_run_id = NULL;
1314 uschar *stop_queue_run_id = NULL;
1315 uschar *expansion_test_message = NULL;
1316 uschar *ftest_domain = NULL;
1317 uschar *ftest_localpart = NULL;
1318 uschar *ftest_prefix = NULL;
1319 uschar *ftest_suffix = NULL;
1320 uschar *malware_test_file = NULL;
1321 uschar *real_sender_address;
1322 uschar *originator_home = US"/";
1326 struct stat statbuf;
1327 pid_t passed_qr_pid = (pid_t)0;
1328 int passed_qr_pipe = -1;
1329 gid_t group_list[NGROUPS_MAX];
1331 /* Possible options for -R and -S */
1333 static uschar *rsopts[] = { US"f", US"ff", US"r", US"rf", US"rff" };
1335 /* Need to define this in case we need to change the environment in order
1336 to get rid of a bogus time zone. We have to make it char rather than uschar
1337 because some OS define it in /usr/include/unistd.h. */
1339 extern char **environ;
1341 /* If the Exim user and/or group and/or the configuration file owner/group were
1342 defined by ref:name at build time, we must now find the actual uid/gid values.
1343 This is a feature to make the lives of binary distributors easier. */
1345 #ifdef EXIM_USERNAME
1346 if (route_finduser(US EXIM_USERNAME, &pw, &exim_uid))
1350 fprintf(stderr, "exim: refusing to run with uid 0 for \"%s\"\n",
1354 exim_gid = pw->pw_gid;
1358 fprintf(stderr, "exim: failed to find uid for user name \"%s\"\n",
1364 #ifdef EXIM_GROUPNAME
1365 if (!route_findgroup(US EXIM_GROUPNAME, &exim_gid))
1367 fprintf(stderr, "exim: failed to find gid for group name \"%s\"\n",
1373 #ifdef CONFIGURE_OWNERNAME
1374 if (!route_finduser(US CONFIGURE_OWNERNAME, NULL, &config_uid))
1376 fprintf(stderr, "exim: failed to find uid for user name \"%s\"\n",
1377 CONFIGURE_OWNERNAME);
1382 /* We default the system_filter_user to be the Exim run-time user, as a
1383 sane non-root value. */
1384 system_filter_uid = exim_uid;
1386 #ifdef CONFIGURE_GROUPNAME
1387 if (!route_findgroup(US CONFIGURE_GROUPNAME, &config_gid))
1389 fprintf(stderr, "exim: failed to find gid for group name \"%s\"\n",
1390 CONFIGURE_GROUPNAME);
1395 /* In the Cygwin environment, some initialization needs doing. It is fudged
1396 in by means of this macro. */
1402 /* Check a field which is patched when we are running Exim within its
1403 testing harness; do a fast initial check, and then the whole thing. */
1405 running_in_test_harness =
1406 *running_status == '<' && Ustrcmp(running_status, "<<<testing>>>") == 0;
1408 /* The C standard says that the equivalent of setlocale(LC_ALL, "C") is obeyed
1409 at the start of a program; however, it seems that some environments do not
1410 follow this. A "strange" locale can affect the formatting of timestamps, so we
1413 setlocale(LC_ALL, "C");
1415 /* Set up the default handler for timing using alarm(). */
1417 os_non_restarting_signal(SIGALRM, sigalrm_handler);
1419 /* Ensure we have a buffer for constructing log entries. Use malloc directly,
1420 because store_malloc writes a log entry on failure. */
1422 log_buffer = (uschar *)malloc(LOG_BUFFER_SIZE);
1423 if (log_buffer == NULL)
1425 fprintf(stderr, "exim: failed to get store for log buffer\n");
1429 /* Set log_stderr to stderr, provided that stderr exists. This gets reset to
1430 NULL when the daemon is run and the file is closed. We have to use this
1431 indirection, because some systems don't allow writing to the variable "stderr".
1434 if (fstat(fileno(stderr), &statbuf) >= 0) log_stderr = stderr;
1436 /* Arrange for the PCRE regex library to use our store functions. Note that
1437 the normal calls are actually macros that add additional arguments for
1438 debugging purposes so we have to assign specially constructed functions here.
1439 The default is to use store in the stacking pool, but this is overridden in the
1440 regex_must_compile() function. */
1442 pcre_malloc = function_store_get;
1443 pcre_free = function_dummy_free;
1445 /* Ensure there is a big buffer for temporary use in several places. It is put
1446 in malloc store so that it can be freed for enlargement if necessary. */
1448 big_buffer = store_malloc(big_buffer_size);
1450 /* Set up the handler for the data request signal, and set the initial
1451 descriptive text. */
1453 set_process_info("initializing");
1454 os_restarting_signal(SIGUSR1, usr1_handler);
1456 /* SIGHUP is used to get the daemon to reconfigure. It gets set as appropriate
1457 in the daemon code. For the rest of Exim's uses, we ignore it. */
1459 signal(SIGHUP, SIG_IGN);
1461 /* We don't want to die on pipe errors as the code is written to handle
1462 the write error instead. */
1464 signal(SIGPIPE, SIG_IGN);
1466 /* Under some circumstance on some OS, Exim can get called with SIGCHLD
1467 set to SIG_IGN. This causes subprocesses that complete before the parent
1468 process waits for them not to hang around, so when Exim calls wait(), nothing
1469 is there. The wait() code has been made robust against this, but let's ensure
1470 that SIGCHLD is set to SIG_DFL, because it's tidier to wait and get a process
1471 ending status. We use sigaction rather than plain signal() on those OS where
1472 SA_NOCLDWAIT exists, because we want to be sure it is turned off. (There was a
1473 problem on AIX with this.) */
1477 struct sigaction act;
1478 act.sa_handler = SIG_DFL;
1479 sigemptyset(&(act.sa_mask));
1481 sigaction(SIGCHLD, &act, NULL);
1484 signal(SIGCHLD, SIG_DFL);
1487 /* Save the arguments for use if we re-exec exim as a daemon after receiving
1492 /* Set up the version number. Set up the leading 'E' for the external form of
1493 message ids, set the pointer to the internal form, and initialize it to
1494 indicate no message being processed. */
1497 message_id_option[0] = '-';
1498 message_id_external = message_id_option + 1;
1499 message_id_external[0] = 'E';
1500 message_id = message_id_external + 1;
1503 /* Set the umask to zero so that any files Exim creates using open() are
1504 created with the modes that it specifies. NOTE: Files created with fopen() have
1505 a problem, which was not recognized till rather late (February 2006). With this
1506 umask, such files will be world writeable. (They are all content scanning files
1507 in the spool directory, which isn't world-accessible, so this is not a
1508 disaster, but it's untidy.) I don't want to change this overall setting,
1509 however, because it will interact badly with the open() calls. Instead, there's
1510 now a function called modefopen() that fiddles with the umask while calling
1515 /* Precompile the regular expression for matching a message id. Keep this in
1516 step with the code that generates ids in the accept.c module. We need to do
1517 this here, because the -M options check their arguments for syntactic validity
1518 using mac_ismsgid, which uses this. */
1521 regex_must_compile(US"^(?:[^\\W_]{6}-){2}[^\\W_]{2}$", FALSE, TRUE);
1523 /* Precompile the regular expression that is used for matching an SMTP error
1524 code, possibly extended, at the start of an error message. Note that the
1525 terminating whitespace character is included. */
1528 regex_must_compile(US"^\\d\\d\\d\\s(?:\\d\\.\\d\\d?\\d?\\.\\d\\d?\\d?\\s)?",
1531 #ifdef WHITELIST_D_MACROS
1532 /* Precompile the regular expression used to filter the content of macros
1533 given to -D for permissibility. */
1535 regex_whitelisted_macro =
1536 regex_must_compile(US"^[A-Za-z0-9_/.-]*$", FALSE, TRUE);
1540 /* If the program is called as "mailq" treat it as equivalent to "exim -bp";
1541 this seems to be a generally accepted convention, since one finds symbolic
1542 links called "mailq" in standard OS configurations. */
1544 if ((namelen == 5 && Ustrcmp(argv[0], "mailq") == 0) ||
1545 (namelen > 5 && Ustrncmp(argv[0] + namelen - 6, "/mailq", 6) == 0))
1548 receiving_message = FALSE;
1549 called_as = US"-mailq";
1552 /* If the program is called as "rmail" treat it as equivalent to
1553 "exim -i -oee", thus allowing UUCP messages to be input using non-SMTP mode,
1554 i.e. preventing a single dot on a line from terminating the message, and
1555 returning with zero return code, even in cases of error (provided an error
1556 message has been sent). */
1558 if ((namelen == 5 && Ustrcmp(argv[0], "rmail") == 0) ||
1559 (namelen > 5 && Ustrncmp(argv[0] + namelen - 6, "/rmail", 6) == 0))
1562 called_as = US"-rmail";
1563 errors_sender_rc = EXIT_SUCCESS;
1566 /* If the program is called as "rsmtp" treat it as equivalent to "exim -bS";
1567 this is a smail convention. */
1569 if ((namelen == 5 && Ustrcmp(argv[0], "rsmtp") == 0) ||
1570 (namelen > 5 && Ustrncmp(argv[0] + namelen - 6, "/rsmtp", 6) == 0))
1572 smtp_input = smtp_batched_input = TRUE;
1573 called_as = US"-rsmtp";
1576 /* If the program is called as "runq" treat it as equivalent to "exim -q";
1577 this is a smail convention. */
1579 if ((namelen == 4 && Ustrcmp(argv[0], "runq") == 0) ||
1580 (namelen > 4 && Ustrncmp(argv[0] + namelen - 5, "/runq", 5) == 0))
1583 receiving_message = FALSE;
1584 called_as = US"-runq";
1587 /* If the program is called as "newaliases" treat it as equivalent to
1588 "exim -bi"; this is a sendmail convention. */
1590 if ((namelen == 10 && Ustrcmp(argv[0], "newaliases") == 0) ||
1591 (namelen > 10 && Ustrncmp(argv[0] + namelen - 11, "/newaliases", 11) == 0))
1594 receiving_message = FALSE;
1595 called_as = US"-newaliases";
1598 /* Save the original effective uid for a couple of uses later. It should
1599 normally be root, but in some esoteric environments it may not be. */
1601 original_euid = geteuid();
1603 /* Get the real uid and gid. If the caller is root, force the effective uid/gid
1604 to be the same as the real ones. This makes a difference only if Exim is setuid
1605 (or setgid) to something other than root, which could be the case in some
1606 special configurations. */
1608 real_uid = getuid();
1609 real_gid = getgid();
1611 if (real_uid == root_uid)
1617 /* If neither the original real uid nor the original euid was root, Exim is
1618 running in an unprivileged state. */
1620 unprivileged = (real_uid != root_uid && original_euid != root_uid);
1622 /* Scan the program's arguments. Some can be dealt with right away; others are
1623 simply recorded for checking and handling afterwards. Do a high-level switch
1624 on the second character (the one after '-'), to save some effort. */
1626 for (i = 1; i < argc; i++)
1628 BOOL badarg = FALSE;
1629 uschar *arg = argv[i];
1633 /* An argument not starting with '-' is the start of a recipients list;
1634 break out of the options-scanning loop. */
1642 /* An option consistion of -- terminates the options */
1644 if (Ustrcmp(arg, "--") == 0)
1646 recipients_arg = i + 1;
1650 /* Handle flagged options */
1652 switchchar = arg[1];
1655 /* Make all -ex options synonymous with -oex arguments, since that
1656 is assumed by various callers. Also make -qR options synonymous with -R
1657 options, as that seems to be required as well. Allow for -qqR too, and
1658 the same for -S options. */
1660 if (Ustrncmp(arg+1, "oe", 2) == 0 ||
1661 Ustrncmp(arg+1, "qR", 2) == 0 ||
1662 Ustrncmp(arg+1, "qS", 2) == 0)
1664 switchchar = arg[2];
1667 else if (Ustrncmp(arg+1, "qqR", 3) == 0 || Ustrncmp(arg+1, "qqS", 3) == 0)
1669 switchchar = arg[3];
1671 queue_2stage = TRUE;
1674 /* Make -r synonymous with -f, since it is a documented alias */
1676 else if (arg[1] == 'r') switchchar = 'f';
1678 /* Make -ov synonymous with -v */
1680 else if (Ustrcmp(arg, "-ov") == 0)
1686 /* deal with --option_aliases */
1687 else if (switchchar == '-')
1689 if (Ustrcmp(argrest, "help") == 0)
1691 usage_wanted = TRUE;
1694 else if (Ustrcmp(argrest, "version") == 0)
1701 /* High-level switch on active initial letter */
1705 /* -Btype is a sendmail option for 7bit/8bit setting. Exim is 8-bit clean
1706 so has no need of it. */
1709 if (*argrest == 0) i++; /* Skip over the type */
1714 receiving_message = FALSE; /* Reset TRUE for -bm, -bS, -bs below */
1716 /* -bd: Run in daemon mode, awaiting SMTP connections.
1717 -bdf: Ditto, but in the foreground.
1720 if (*argrest == 'd')
1722 daemon_listen = TRUE;
1723 if (*(++argrest) == 'f') background_daemon = FALSE;
1724 else if (*argrest != 0) { badarg = TRUE; break; }
1727 /* -be: Run in expansion test mode
1728 -bem: Ditto, but read a message from a file first
1731 else if (*argrest == 'e')
1733 expansion_test = checking = TRUE;
1734 if (argrest[1] == 'm')
1736 if (++i >= argc) { badarg = TRUE; break; }
1737 expansion_test_message = argv[i];
1740 if (argrest[1] != 0) { badarg = TRUE; break; }
1743 /* -bF: Run system filter test */
1745 else if (*argrest == 'F')
1747 filter_test |= FTEST_SYSTEM;
1748 if (*(++argrest) != 0) { badarg = TRUE; break; }
1749 if (++i < argc) filter_test_sfile = argv[i]; else
1751 fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]);
1756 /* -bf: Run user filter test
1757 -bfd: Set domain for filter testing
1758 -bfl: Set local part for filter testing
1759 -bfp: Set prefix for filter testing
1760 -bfs: Set suffix for filter testing
1763 else if (*argrest == 'f')
1765 if (*(++argrest) == 0)
1767 filter_test |= FTEST_USER;
1768 if (++i < argc) filter_test_ufile = argv[i]; else
1770 fprintf(stderr, "exim: file name expected after %s\n", argv[i-1]);
1778 fprintf(stderr, "exim: string expected after %s\n", arg);
1781 if (Ustrcmp(argrest, "d") == 0) ftest_domain = argv[i];
1782 else if (Ustrcmp(argrest, "l") == 0) ftest_localpart = argv[i];
1783 else if (Ustrcmp(argrest, "p") == 0) ftest_prefix = argv[i];
1784 else if (Ustrcmp(argrest, "s") == 0) ftest_suffix = argv[i];
1785 else { badarg = TRUE; break; }
1789 /* -bh: Host checking - an IP address must follow. */
1791 else if (Ustrcmp(argrest, "h") == 0 || Ustrcmp(argrest, "hc") == 0)
1793 if (++i >= argc) { badarg = TRUE; break; }
1794 sender_host_address = argv[i];
1795 host_checking = checking = log_testing_mode = TRUE;
1796 host_checking_callout = argrest[1] == 'c';
1799 /* -bi: This option is used by sendmail to initialize *the* alias file,
1800 though it has the -oA option to specify a different file. Exim has no
1801 concept of *the* alias file, but since Sun's YP make script calls
1802 sendmail this way, some support must be provided. */
1804 else if (Ustrcmp(argrest, "i") == 0) bi_option = TRUE;
1806 /* -bm: Accept and deliver message - the default option. Reinstate
1807 receiving_message, which got turned off for all -b options. */
1809 else if (Ustrcmp(argrest, "m") == 0) receiving_message = TRUE;
1811 /* -bmalware: test the filename given for malware */
1813 else if (Ustrcmp(argrest, "malware") == 0)
1815 if (++i >= argc) { badarg = TRUE; break; }
1816 malware_test_file = argv[i];
1819 /* -bnq: For locally originating messages, do not qualify unqualified
1820 addresses. In the envelope, this causes errors; in header lines they
1823 else if (Ustrcmp(argrest, "nq") == 0)
1825 allow_unqualified_sender = FALSE;
1826 allow_unqualified_recipient = FALSE;
1829 /* -bpxx: List the contents of the mail queue, in various forms. If
1830 the option is -bpc, just a queue count is needed. Otherwise, if the
1831 first letter after p is r, then order is random. */
1833 else if (*argrest == 'p')
1835 if (*(++argrest) == 'c')
1838 if (*(++argrest) != 0) badarg = TRUE;
1842 if (*argrest == 'r')
1844 list_queue_option = 8;
1847 else list_queue_option = 0;
1851 /* -bp: List the contents of the mail queue, top-level only */
1853 if (*argrest == 0) {}
1855 /* -bpu: List the contents of the mail queue, top-level undelivered */
1857 else if (Ustrcmp(argrest, "u") == 0) list_queue_option += 1;
1859 /* -bpa: List the contents of the mail queue, including all delivered */
1861 else if (Ustrcmp(argrest, "a") == 0) list_queue_option += 2;
1863 /* Unknown after -bp[r] */
1873 /* -bP: List the configuration variables given as the address list.
1874 Force -v, so configuration errors get displayed. */
1876 else if (Ustrcmp(argrest, "P") == 0)
1878 list_options = TRUE;
1879 debug_selector |= D_v;
1880 debug_file = stderr;
1883 /* -brt: Test retry configuration lookup */
1885 else if (Ustrcmp(argrest, "rt") == 0)
1887 test_retry_arg = i + 1;
1891 /* -brw: Test rewrite configuration */
1893 else if (Ustrcmp(argrest, "rw") == 0)
1895 test_rewrite_arg = i + 1;
1899 /* -bS: Read SMTP commands on standard input, but produce no replies -
1900 all errors are reported by sending messages. */
1902 else if (Ustrcmp(argrest, "S") == 0)
1903 smtp_input = smtp_batched_input = receiving_message = TRUE;
1905 /* -bs: Read SMTP commands on standard input and produce SMTP replies
1906 on standard output. */
1908 else if (Ustrcmp(argrest, "s") == 0) smtp_input = receiving_message = TRUE;
1910 /* -bt: address testing mode */
1912 else if (Ustrcmp(argrest, "t") == 0)
1913 address_test_mode = checking = log_testing_mode = TRUE;
1915 /* -bv: verify addresses */
1917 else if (Ustrcmp(argrest, "v") == 0)
1918 verify_address_mode = checking = log_testing_mode = TRUE;
1920 /* -bvs: verify sender addresses */
1922 else if (Ustrcmp(argrest, "vs") == 0)
1924 verify_address_mode = checking = log_testing_mode = TRUE;
1925 verify_as_sender = TRUE;
1928 /* -bV: Print version string and support details */
1930 else if (Ustrcmp(argrest, "V") == 0)
1932 printf("Exim version %s #%s built %s\n", version_string,
1933 version_cnumber, version_date);
1934 printf("%s\n", CS version_copyright);
1935 version_printed = TRUE;
1936 show_whats_supported(stdout);
1943 /* -C: change configuration file list; ignore if it isn't really
1944 a change! Enforce a prefix check if required. */
1949 if(++i < argc) argrest = argv[i]; else
1950 { badarg = TRUE; break; }
1952 if (Ustrcmp(config_main_filelist, argrest) != 0)
1954 #ifdef ALT_CONFIG_PREFIX
1956 int len = Ustrlen(ALT_CONFIG_PREFIX);
1957 uschar *list = argrest;
1959 while((filename = string_nextinlist(&list, &sep, big_buffer,
1960 big_buffer_size)) != NULL)
1962 if ((Ustrlen(filename) < len ||
1963 Ustrncmp(filename, ALT_CONFIG_PREFIX, len) != 0 ||
1964 Ustrstr(filename, "/../") != NULL) &&
1965 (Ustrcmp(filename, "/dev/null") != 0 || real_uid != root_uid))
1967 fprintf(stderr, "-C Permission denied\n");
1972 if (real_uid != root_uid)
1974 #ifdef TRUSTED_CONFIG_LIST
1976 if (real_uid != exim_uid
1977 #ifdef CONFIGURE_OWNER
1978 && real_uid != config_uid
1981 trusted_config = FALSE;
1984 FILE *trust_list = Ufopen(TRUSTED_CONFIG_LIST, "rb");
1987 struct stat statbuf;
1989 if (fstat(fileno(trust_list), &statbuf) != 0 ||
1990 (statbuf.st_uid != root_uid /* owner not root */
1991 #ifdef CONFIGURE_OWNER
1992 && statbuf.st_uid != config_uid /* owner not the special one */
1995 (statbuf.st_gid != root_gid /* group not root */
1996 #ifdef CONFIGURE_GROUP
1997 && statbuf.st_gid != config_gid /* group not the special one */
1999 && (statbuf.st_mode & 020) != 0 /* group writeable */
2001 (statbuf.st_mode & 2) != 0) /* world writeable */
2003 trusted_config = FALSE;
2008 /* Well, the trust list at least is up to scratch... */
2009 void *reset_point = store_get(0);
2010 uschar *trusted_configs[32];
2014 while (Ufgets(big_buffer, big_buffer_size, trust_list))
2016 uschar *start = big_buffer, *nl;
2017 while (*start && isspace(*start))
2021 nl = Ustrchr(start, '\n');
2024 trusted_configs[nr_configs++] = string_copy(start);
2025 if (nr_configs == 32)
2033 uschar *list = argrest;
2035 while (trusted_config && (filename = string_nextinlist(&list,
2036 &sep, big_buffer, big_buffer_size)) != NULL)
2038 for (i=0; i < nr_configs; i++)
2040 if (Ustrcmp(filename, trusted_configs[i]) == 0)
2043 if (i == nr_configs)
2045 trusted_config = FALSE;
2049 store_reset(reset_point);
2053 /* No valid prefixes found in trust_list file. */
2054 trusted_config = FALSE;
2060 /* Could not open trust_list file. */
2061 trusted_config = FALSE;
2065 /* Not root; don't trust config */
2066 trusted_config = FALSE;
2070 config_main_filelist = argrest;
2071 config_changed = TRUE;
2076 /* -D: set up a macro definition */
2079 #ifdef DISABLE_D_OPTION
2080 fprintf(stderr, "exim: -D is not available in this Exim binary\n");
2085 macro_item *mlast = NULL;
2088 uschar *s = argrest;
2090 while (isspace(*s)) s++;
2092 if (*s < 'A' || *s > 'Z')
2094 fprintf(stderr, "exim: macro name set by -D must start with "
2095 "an upper case letter\n");
2099 while (isalnum(*s) || *s == '_')
2101 if (ptr < sizeof(name)-1) name[ptr++] = *s;
2105 if (ptr == 0) { badarg = TRUE; break; }
2106 while (isspace(*s)) s++;
2109 if (*s++ != '=') { badarg = TRUE; break; }
2110 while (isspace(*s)) s++;
2113 for (m = macros; m != NULL; m = m->next)
2115 if (Ustrcmp(m->name, name) == 0)
2117 fprintf(stderr, "exim: duplicated -D in command line\n");
2123 m = store_get(sizeof(macro_item) + Ustrlen(name));
2125 m->command_line = TRUE;
2126 if (mlast == NULL) macros = m; else mlast->next = m;
2127 Ustrcpy(m->name, name);
2128 m->replacement = string_copy(s);
2130 if (clmacro_count >= MAX_CLMACROS)
2132 fprintf(stderr, "exim: too many -D options on command line\n");
2135 clmacros[clmacro_count++] = string_sprintf("-D%s=%s", m->name,
2141 /* -d: Set debug level (see also -v below) or set the drop_cr option.
2142 The latter is now a no-op, retained for compatibility only. If -dd is used,
2143 debugging subprocesses of the daemon is disabled. */
2146 if (Ustrcmp(argrest, "ropcr") == 0)
2148 /* drop_cr = TRUE; */
2151 /* Use an intermediate variable so that we don't set debugging while
2152 decoding the debugging bits. */
2156 unsigned int selector = D_default;
2159 if (*argrest == 'd')
2161 debug_daemon = TRUE;
2165 decode_bits(&selector, NULL, D_memory, 0, argrest, debug_options,
2166 debug_options_count, US"debug", 0);
2167 debug_selector = selector;
2172 /* -E: This is a local error message. This option is not intended for
2173 external use at all, but is not restricted to trusted callers because it
2174 does no harm (just suppresses certain error messages) and if Exim is run
2175 not setuid root it won't always be trusted when it generates error
2176 messages using this option. If there is a message id following -E, point
2177 message_reference at it, for logging. */
2180 local_error_message = TRUE;
2181 if (mac_ismsgid(argrest)) message_reference = argrest;
2185 /* -ex: The vacation program calls sendmail with the undocumented "-eq"
2186 option, so it looks as if historically the -oex options are also callable
2187 without the leading -o. So we have to accept them. Before the switch,
2188 anything starting -oe has been converted to -e. Exim does not support all
2189 of the sendmail error options. */
2192 if (Ustrcmp(argrest, "e") == 0)
2194 arg_error_handling = ERRORS_SENDER;
2195 errors_sender_rc = EXIT_SUCCESS;
2197 else if (Ustrcmp(argrest, "m") == 0) arg_error_handling = ERRORS_SENDER;
2198 else if (Ustrcmp(argrest, "p") == 0) arg_error_handling = ERRORS_STDERR;
2199 else if (Ustrcmp(argrest, "q") == 0) arg_error_handling = ERRORS_STDERR;
2200 else if (Ustrcmp(argrest, "w") == 0) arg_error_handling = ERRORS_SENDER;
2205 /* -F: Set sender's full name, used instead of the gecos entry from
2206 the password file. Since users can usually alter their gecos entries,
2207 there's no security involved in using this instead. The data can follow
2208 the -F or be in the next argument. */
2213 if(++i < argc) argrest = argv[i]; else
2214 { badarg = TRUE; break; }
2216 originator_name = argrest;
2217 sender_name_forced = TRUE;
2221 /* -f: Set sender's address - this value is only actually used if Exim is
2222 run by a trusted user, or if untrusted_set_sender is set and matches the
2223 address, except that the null address can always be set by any user. The
2224 test for this happens later, when the value given here is ignored when not
2225 permitted. For an untrusted user, the actual sender is still put in Sender:
2226 if it doesn't match the From: header (unless no_local_from_check is set).
2227 The data can follow the -f or be in the next argument. The -r switch is an
2228 obsolete form of -f but since there appear to be programs out there that
2229 use anything that sendmail has ever supported, better accept it - the
2230 synonymizing is done before the switch above.
2232 At this stage, we must allow domain literal addresses, because we don't
2233 know what the setting of allow_domain_literals is yet. Ditto for trailing
2234 dots and strip_trailing_dot. */
2242 if (i+1 < argc) argrest = argv[++i]; else
2243 { badarg = TRUE; break; }
2247 sender_address = string_sprintf(""); /* Ensure writeable memory */
2251 uschar *temp = argrest + Ustrlen(argrest) - 1;
2252 while (temp >= argrest && isspace(*temp)) temp--;
2253 if (temp >= argrest && *temp == '.') f_end_dot = TRUE;
2254 allow_domain_literals = TRUE;
2255 strip_trailing_dot = TRUE;
2256 sender_address = parse_extract_address(argrest, &errmess, &start, &end,
2257 &sender_address_domain, TRUE);
2258 allow_domain_literals = FALSE;
2259 strip_trailing_dot = FALSE;
2260 if (sender_address == NULL)
2262 fprintf(stderr, "exim: bad -f address \"%s\": %s\n", argrest, errmess);
2263 return EXIT_FAILURE;
2266 sender_address_forced = TRUE;
2270 /* This is some Sendmail thing which can be ignored */
2275 /* -h: Set the hop count for an incoming message. Exim does not currently
2276 support this; it always computes it by counting the Received: headers.
2277 To put it in will require a change to the spool header file format. */
2282 if(++i < argc) argrest = argv[i]; else
2283 { badarg = TRUE; break; }
2285 if (!isdigit(*argrest)) badarg = TRUE;
2289 /* -i: Set flag so dot doesn't end non-SMTP input (same as -oi, seems
2290 not to be documented for sendmail but mailx (at least) uses it) */
2293 if (*argrest == 0) dot_ends = FALSE; else badarg = TRUE;
2298 receiving_message = FALSE;
2300 /* -MC: continue delivery of another message via an existing open
2301 file descriptor. This option is used for an internal call by the
2302 smtp transport when there is a pending message waiting to go to an
2303 address to which it has got a connection. Five subsequent arguments are
2304 required: transport name, host name, IP address, sequence number, and
2305 message_id. Transports may decline to create new processes if the sequence
2306 number gets too big. The channel is stdin. This (-MC) must be the last
2307 argument. There's a subsequent check that the real-uid is privileged.
2309 If we are running in the test harness. delay for a bit, to let the process
2310 that set this one up complete. This makes for repeatability of the logging,
2313 if (Ustrcmp(argrest, "C") == 0)
2315 union sockaddr_46 interface_sock;
2316 EXIM_SOCKLEN_T size = sizeof(interface_sock);
2320 fprintf(stderr, "exim: too many or too few arguments after -MC\n");
2321 return EXIT_FAILURE;
2324 if (msg_action_arg >= 0)
2326 fprintf(stderr, "exim: incompatible arguments\n");
2327 return EXIT_FAILURE;
2330 continue_transport = argv[++i];
2331 continue_hostname = argv[++i];
2332 continue_host_address = argv[++i];
2333 continue_sequence = Uatoi(argv[++i]);
2334 msg_action = MSG_DELIVER;
2335 msg_action_arg = ++i;
2336 forced_delivery = TRUE;
2337 queue_run_pid = passed_qr_pid;
2338 queue_run_pipe = passed_qr_pipe;
2340 if (!mac_ismsgid(argv[i]))
2342 fprintf(stderr, "exim: malformed message id %s after -MC option\n",
2344 return EXIT_FAILURE;
2347 /* Set up $sending_ip_address and $sending_port */
2349 if (getsockname(fileno(stdin), (struct sockaddr *)(&interface_sock),
2351 sending_ip_address = host_ntoa(-1, &interface_sock, NULL,
2355 fprintf(stderr, "exim: getsockname() failed after -MC option: %s\n",
2357 return EXIT_FAILURE;
2360 if (running_in_test_harness) millisleep(500);
2364 /* -MCA: set the smtp_authenticated flag; this is useful only when it
2365 precedes -MC (see above). The flag indicates that the host to which
2366 Exim is connected has accepted an AUTH sequence. */
2368 else if (Ustrcmp(argrest, "CA") == 0)
2370 smtp_authenticated = TRUE;
2374 /* -MCP: set the smtp_use_pipelining flag; this is useful only when
2375 it preceded -MC (see above) */
2377 else if (Ustrcmp(argrest, "CP") == 0)
2379 smtp_use_pipelining = TRUE;
2383 /* -MCQ: pass on the pid of the queue-running process that started
2384 this chain of deliveries and the fd of its synchronizing pipe; this
2385 is useful only when it precedes -MC (see above) */
2387 else if (Ustrcmp(argrest, "CQ") == 0)
2389 if(++i < argc) passed_qr_pid = (pid_t)(Uatol(argv[i]));
2391 if(++i < argc) passed_qr_pipe = (int)(Uatol(argv[i]));
2396 /* -MCS: set the smtp_use_size flag; this is useful only when it
2397 precedes -MC (see above) */
2399 else if (Ustrcmp(argrest, "CS") == 0)
2401 smtp_use_size = TRUE;
2405 /* -MCT: set the tls_offered flag; this is useful only when it
2406 precedes -MC (see above). The flag indicates that the host to which
2407 Exim is connected has offered TLS support. */
2410 else if (Ustrcmp(argrest, "CT") == 0)
2417 /* -M[x]: various operations on the following list of message ids:
2418 -M deliver the messages, ignoring next retry times and thawing
2419 -Mc deliver the messages, checking next retry times, no thawing
2420 -Mf freeze the messages
2421 -Mg give up on the messages
2422 -Mt thaw the messages
2423 -Mrm remove the messages
2424 In the above cases, this must be the last option. There are also the
2425 following options which are followed by a single message id, and which
2426 act on that message. Some of them use the "recipient" addresses as well.
2427 -Mar add recipient(s)
2428 -Mmad mark all recipients delivered
2429 -Mmd mark recipients(s) delivered
2431 -Mset load a message for use with -be
2433 -Mvc show copy (of whole message, in RFC 2822 format)
2438 else if (*argrest == 0)
2440 msg_action = MSG_DELIVER;
2441 forced_delivery = deliver_force_thaw = TRUE;
2443 else if (Ustrcmp(argrest, "ar") == 0)
2445 msg_action = MSG_ADD_RECIPIENT;
2446 one_msg_action = TRUE;
2448 else if (Ustrcmp(argrest, "c") == 0) msg_action = MSG_DELIVER;
2449 else if (Ustrcmp(argrest, "es") == 0)
2451 msg_action = MSG_EDIT_SENDER;
2452 one_msg_action = TRUE;
2454 else if (Ustrcmp(argrest, "f") == 0) msg_action = MSG_FREEZE;
2455 else if (Ustrcmp(argrest, "g") == 0)
2457 msg_action = MSG_DELIVER;
2458 deliver_give_up = TRUE;
2460 else if (Ustrcmp(argrest, "mad") == 0)
2462 msg_action = MSG_MARK_ALL_DELIVERED;
2464 else if (Ustrcmp(argrest, "md") == 0)
2466 msg_action = MSG_MARK_DELIVERED;
2467 one_msg_action = TRUE;
2469 else if (Ustrcmp(argrest, "rm") == 0) msg_action = MSG_REMOVE;
2470 else if (Ustrcmp(argrest, "set") == 0)
2472 msg_action = MSG_LOAD;
2473 one_msg_action = TRUE;
2475 else if (Ustrcmp(argrest, "t") == 0) msg_action = MSG_THAW;
2476 else if (Ustrcmp(argrest, "vb") == 0)
2478 msg_action = MSG_SHOW_BODY;
2479 one_msg_action = TRUE;
2481 else if (Ustrcmp(argrest, "vc") == 0)
2483 msg_action = MSG_SHOW_COPY;
2484 one_msg_action = TRUE;
2486 else if (Ustrcmp(argrest, "vh") == 0)
2488 msg_action = MSG_SHOW_HEADER;
2489 one_msg_action = TRUE;
2491 else if (Ustrcmp(argrest, "vl") == 0)
2493 msg_action = MSG_SHOW_LOG;
2494 one_msg_action = TRUE;
2496 else { badarg = TRUE; break; }
2498 /* All the -Mxx options require at least one message id. */
2500 msg_action_arg = i + 1;
2501 if (msg_action_arg >= argc)
2503 fprintf(stderr, "exim: no message ids given after %s option\n", arg);
2504 return EXIT_FAILURE;
2507 /* Some require only message ids to follow */
2509 if (!one_msg_action)
2512 for (j = msg_action_arg; j < argc; j++) if (!mac_ismsgid(argv[j]))
2514 fprintf(stderr, "exim: malformed message id %s after %s option\n",
2516 return EXIT_FAILURE;
2518 goto END_ARG; /* Remaining args are ids */
2521 /* Others require only one message id, possibly followed by addresses,
2522 which will be handled as normal arguments. */
2526 if (!mac_ismsgid(argv[msg_action_arg]))
2528 fprintf(stderr, "exim: malformed message id %s after %s option\n",
2529 argv[msg_action_arg], arg);
2530 return EXIT_FAILURE;
2537 /* Some programs seem to call the -om option without the leading o;
2538 for sendmail it askes for "me too". Exim always does this. */
2541 if (*argrest != 0) badarg = TRUE;
2545 /* -N: don't do delivery - a debugging option that stops transports doing
2546 their thing. It implies debugging at the D_v level. */
2551 dont_deliver = TRUE;
2552 debug_selector |= D_v;
2553 debug_file = stderr;
2559 /* -n: This means "don't alias" in sendmail, apparently. Just ignore
2565 /* -O: Just ignore it. In sendmail, apparently -O option=value means set
2566 option to the specified value. This form uses long names. We need to handle
2567 -O option=value and -Ooption=value. */
2574 fprintf(stderr, "exim: string expected after -O\n");
2582 /* -oA: Set an argument for the bi command (sendmail's "alternate alias
2585 if (*argrest == 'A')
2587 alias_arg = argrest + 1;
2588 if (alias_arg[0] == 0)
2590 if (i+1 < argc) alias_arg = argv[++i]; else
2592 fprintf(stderr, "exim: string expected after -oA\n");
2598 /* -oB: Set a connection message max value for remote deliveries */
2600 else if (*argrest == 'B')
2602 uschar *p = argrest + 1;
2605 if (i+1 < argc && isdigit((argv[i+1][0]))) p = argv[++i]; else
2607 connection_max_messages = 1;
2616 fprintf(stderr, "exim: number expected after -oB\n");
2619 connection_max_messages = Uatoi(p);
2623 /* -odb: background delivery */
2625 else if (Ustrcmp(argrest, "db") == 0)
2627 synchronous_delivery = FALSE;
2628 arg_queue_only = FALSE;
2629 queue_only_set = TRUE;
2632 /* -odf: foreground delivery (smail-compatible option); same effect as
2633 -odi: interactive (synchronous) delivery (sendmail-compatible option)
2636 else if (Ustrcmp(argrest, "df") == 0 || Ustrcmp(argrest, "di") == 0)
2638 synchronous_delivery = TRUE;
2639 arg_queue_only = FALSE;
2640 queue_only_set = TRUE;
2643 /* -odq: queue only */
2645 else if (Ustrcmp(argrest, "dq") == 0)
2647 synchronous_delivery = FALSE;
2648 arg_queue_only = TRUE;
2649 queue_only_set = TRUE;
2652 /* -odqs: queue SMTP only - do local deliveries and remote routing,
2653 but no remote delivery */
2655 else if (Ustrcmp(argrest, "dqs") == 0)
2658 arg_queue_only = FALSE;
2659 queue_only_set = TRUE;
2662 /* -oex: Sendmail error flags. As these are also accepted without the
2663 leading -o prefix, for compatibility with vacation and other callers,
2664 they are handled with -e above. */
2666 /* -oi: Set flag so dot doesn't end non-SMTP input (same as -i)
2667 -oitrue: Another sendmail syntax for the same */
2669 else if (Ustrcmp(argrest, "i") == 0 ||
2670 Ustrcmp(argrest, "itrue") == 0)
2673 /* -oM*: Set various characteristics for an incoming message; actually
2674 acted on for trusted callers only. */
2676 else if (*argrest == 'M')
2680 fprintf(stderr, "exim: data expected after -o%s\n", argrest);
2684 /* -oMa: Set sender host address */
2686 if (Ustrcmp(argrest, "Ma") == 0) sender_host_address = argv[++i];
2688 /* -oMaa: Set authenticator name */
2690 else if (Ustrcmp(argrest, "Maa") == 0)
2691 sender_host_authenticated = argv[++i];
2693 /* -oMas: setting authenticated sender */
2695 else if (Ustrcmp(argrest, "Mas") == 0) authenticated_sender = argv[++i];
2697 /* -oMai: setting authenticated id */
2699 else if (Ustrcmp(argrest, "Mai") == 0) authenticated_id = argv[++i];
2701 /* -oMi: Set incoming interface address */
2703 else if (Ustrcmp(argrest, "Mi") == 0) interface_address = argv[++i];
2705 /* -oMr: Received protocol */
2707 else if (Ustrcmp(argrest, "Mr") == 0) received_protocol = argv[++i];
2709 /* -oMs: Set sender host name */
2711 else if (Ustrcmp(argrest, "Ms") == 0) sender_host_name = argv[++i];
2713 /* -oMt: Set sender ident */
2715 else if (Ustrcmp(argrest, "Mt") == 0)
2717 sender_ident_set = TRUE;
2718 sender_ident = argv[++i];
2721 /* Else a bad argument */
2730 /* -om: Me-too flag for aliases. Exim always does this. Some programs
2731 seem to call this as -m (undocumented), so that is also accepted (see
2734 else if (Ustrcmp(argrest, "m") == 0) {}
2736 /* -oo: An ancient flag for old-style addresses which still seems to
2737 crop up in some calls (see in SCO). */
2739 else if (Ustrcmp(argrest, "o") == 0) {}
2741 /* -oP <name>: set pid file path for daemon */
2743 else if (Ustrcmp(argrest, "P") == 0)
2744 override_pid_file_path = argv[++i];
2746 /* -or <n>: set timeout for non-SMTP acceptance
2747 -os <n>: set timeout for SMTP acceptance */
2749 else if (*argrest == 'r' || *argrest == 's')
2751 int *tp = (*argrest == 'r')?
2752 &arg_receive_timeout : &arg_smtp_receive_timeout;
2753 if (argrest[1] == 0)
2755 if (i+1 < argc) *tp= readconf_readtime(argv[++i], 0, FALSE);
2757 else *tp = readconf_readtime(argrest + 1, 0, FALSE);
2760 fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]);
2765 /* -oX <list>: Override local_interfaces and/or default daemon ports */
2767 else if (Ustrcmp(argrest, "X") == 0)
2768 override_local_interfaces = argv[++i];
2770 /* Unknown -o argument */
2776 /* -ps: force Perl startup; -pd force delayed Perl startup */
2780 if (*argrest == 's' && argrest[1] == 0)
2782 perl_start_option = 1;
2785 if (*argrest == 'd' && argrest[1] == 0)
2787 perl_start_option = -1;
2792 /* -panythingelse is taken as the Sendmail-compatible argument -prval:sval,
2793 which sets the host protocol and host name */
2797 if (i+1 < argc) argrest = argv[++i]; else
2798 { badarg = TRUE; break; }
2803 uschar *hn = Ustrchr(argrest, ':');
2806 received_protocol = argrest;
2810 received_protocol = string_copyn(argrest, hn - argrest);
2811 sender_host_name = hn + 1;
2818 receiving_message = FALSE;
2819 if (queue_interval >= 0)
2821 fprintf(stderr, "exim: -q specified more than once\n");
2825 /* -qq...: Do queue runs in a 2-stage manner */
2827 if (*argrest == 'q')
2829 queue_2stage = TRUE;
2833 /* -qi...: Do only first (initial) deliveries */
2835 if (*argrest == 'i')
2837 queue_run_first_delivery = TRUE;
2841 /* -qf...: Run the queue, forcing deliveries
2842 -qff..: Ditto, forcing thawing as well */
2844 if (*argrest == 'f')
2846 queue_run_force = TRUE;
2847 if (*(++argrest) == 'f')
2849 deliver_force_thaw = TRUE;
2854 /* -q[f][f]l...: Run the queue only on local deliveries */
2856 if (*argrest == 'l')
2858 queue_run_local = TRUE;
2862 /* -q[f][f][l]: Run the queue, optionally forced, optionally local only,
2863 optionally starting from a given message id. */
2865 if (*argrest == 0 &&
2866 (i + 1 >= argc || argv[i+1][0] == '-' || mac_ismsgid(argv[i+1])))
2869 if (i+1 < argc && mac_ismsgid(argv[i+1]))
2870 start_queue_run_id = argv[++i];
2871 if (i+1 < argc && mac_ismsgid(argv[i+1]))
2872 stop_queue_run_id = argv[++i];
2875 /* -q[f][f][l]<n>: Run the queue at regular intervals, optionally forced,
2876 optionally local only. */
2881 queue_interval = readconf_readtime(argrest, 0, FALSE);
2883 queue_interval = readconf_readtime(argv[++i], 0, FALSE);
2884 if (queue_interval <= 0)
2886 fprintf(stderr, "exim: bad time value %s: abandoned\n", argv[i]);
2893 case 'R': /* Synonymous with -qR... */
2894 receiving_message = FALSE;
2896 /* -Rf: As -R (below) but force all deliveries,
2897 -Rff: Ditto, but also thaw all frozen messages,
2898 -Rr: String is regex
2899 -Rrf: Regex and force
2900 -Rrff: Regex and force and thaw
2902 in all cases provided there are no further characters in this
2908 for (i = 0; i < sizeof(rsopts)/sizeof(uschar *); i++)
2910 if (Ustrcmp(argrest, rsopts[i]) == 0)
2912 if (i != 2) queue_run_force = TRUE;
2913 if (i >= 2) deliver_selectstring_regex = TRUE;
2914 if (i == 1 || i == 4) deliver_force_thaw = TRUE;
2915 argrest += Ustrlen(rsopts[i]);
2920 /* -R: Set string to match in addresses for forced queue run to
2921 pick out particular messages. */
2925 if (i+1 < argc) deliver_selectstring = argv[++i]; else
2927 fprintf(stderr, "exim: string expected after -R\n");
2931 else deliver_selectstring = argrest;
2935 /* -r: an obsolete synonym for -f (see above) */
2938 /* -S: Like -R but works on sender. */
2940 case 'S': /* Synonymous with -qS... */
2941 receiving_message = FALSE;
2943 /* -Sf: As -S (below) but force all deliveries,
2944 -Sff: Ditto, but also thaw all frozen messages,
2945 -Sr: String is regex
2946 -Srf: Regex and force
2947 -Srff: Regex and force and thaw
2949 in all cases provided there are no further characters in this
2955 for (i = 0; i < sizeof(rsopts)/sizeof(uschar *); i++)
2957 if (Ustrcmp(argrest, rsopts[i]) == 0)
2959 if (i != 2) queue_run_force = TRUE;
2960 if (i >= 2) deliver_selectstring_sender_regex = TRUE;
2961 if (i == 1 || i == 4) deliver_force_thaw = TRUE;
2962 argrest += Ustrlen(rsopts[i]);
2967 /* -S: Set string to match in addresses for forced queue run to
2968 pick out particular messages. */
2972 if (i+1 < argc) deliver_selectstring_sender = argv[++i]; else
2974 fprintf(stderr, "exim: string expected after -S\n");
2978 else deliver_selectstring_sender = argrest;
2981 /* -Tqt is an option that is exclusively for use by the testing suite.
2982 It is not recognized in other circumstances. It allows for the setting up
2983 of explicit "queue times" so that various warning/retry things can be
2984 tested. Otherwise variability of clock ticks etc. cause problems. */
2987 if (running_in_test_harness && Ustrcmp(argrest, "qt") == 0)
2988 fudged_queue_times = argv[++i];
2993 /* -t: Set flag to extract recipients from body of message. */
2996 if (*argrest == 0) extract_recipients = TRUE;
2998 /* -ti: Set flag to extract recipients from body of message, and also
2999 specify that dot does not end the message. */
3001 else if (Ustrcmp(argrest, "i") == 0)
3003 extract_recipients = TRUE;
3007 /* -tls-on-connect: don't wait for STARTTLS (for old clients) */
3010 else if (Ustrcmp(argrest, "ls-on-connect") == 0) tls_on_connect = TRUE;
3017 /* -U: This means "initial user submission" in sendmail, apparently. The
3018 doc claims that in future sendmail may refuse syntactically invalid
3019 messages instead of fixing them. For the moment, we just ignore it. */
3025 /* -v: verify things - this is a very low-level debugging */
3030 debug_selector |= D_v;
3031 debug_file = stderr;
3037 /* -x: AIX uses this to indicate some fancy 8-bit character stuff:
3039 The -x flag tells the sendmail command that mail from a local
3040 mail program has National Language Support (NLS) extended characters
3041 in the body of the mail item. The sendmail command can send mail with
3042 extended NLS characters across networks that normally corrupts these
3045 As Exim is 8-bit clean, it just ignores this flag. */
3048 if (*argrest != 0) badarg = TRUE;
3051 /* All other initial characters are errors */
3056 } /* End of high-level switch statement */
3058 /* Failed to recognize the option, or syntax error */
3062 fprintf(stderr, "exim abandoned: unknown, malformed, or incomplete "
3063 "option %s\n", arg);
3069 /* If -R or -S have been specified without -q, assume a single queue run. */
3071 if ((deliver_selectstring != NULL || deliver_selectstring_sender != NULL) &&
3072 queue_interval < 0) queue_interval = 0;
3076 /* If usage_wanted is set we call the usage function - which never returns */
3077 if (usage_wanted) exim_usage(called_as);
3079 /* Arguments have been processed. Check for incompatibilities. */
3081 (smtp_input || extract_recipients || recipients_arg < argc) &&
3082 (daemon_listen || queue_interval >= 0 || bi_option ||
3083 test_retry_arg >= 0 || test_rewrite_arg >= 0 ||
3084 filter_test != FTEST_NONE || (msg_action_arg > 0 && !one_msg_action))
3087 msg_action_arg > 0 &&
3088 (daemon_listen || queue_interval >= 0 || list_options ||
3089 (checking && msg_action != MSG_LOAD) ||
3090 bi_option || test_retry_arg >= 0 || test_rewrite_arg >= 0)
3093 (daemon_listen || queue_interval >= 0) &&
3094 (sender_address != NULL || list_options || list_queue || checking ||
3098 daemon_listen && queue_interval == 0
3102 (checking || smtp_input || extract_recipients ||
3103 filter_test != FTEST_NONE || bi_option)
3106 verify_address_mode &&
3107 (address_test_mode || smtp_input || extract_recipients ||
3108 filter_test != FTEST_NONE || bi_option)
3111 address_test_mode && (smtp_input || extract_recipients ||
3112 filter_test != FTEST_NONE || bi_option)
3115 smtp_input && (sender_address != NULL || filter_test != FTEST_NONE ||
3119 deliver_selectstring != NULL && queue_interval < 0
3122 msg_action == MSG_LOAD &&
3123 (!expansion_test || expansion_test_message != NULL)
3127 fprintf(stderr, "exim: incompatible command-line options or arguments\n");
3131 /* If debugging is set up, set the file and the file descriptor to pass on to
3132 child processes. It should, of course, be 2 for stderr. Also, force the daemon
3133 to run in the foreground. */
3135 if (debug_selector != 0)
3137 debug_file = stderr;
3138 debug_fd = fileno(debug_file);
3139 background_daemon = FALSE;
3140 if (running_in_test_harness) millisleep(100); /* lets caller finish */
3141 if (debug_selector != D_v) /* -v only doesn't show this */
3143 debug_printf("Exim version %s uid=%ld gid=%ld pid=%d D=%x\n",
3144 version_string, (long int)real_uid, (long int)real_gid, (int)getpid(),
3146 show_whats_supported(stderr);
3150 /* When started with root privilege, ensure that the limits on the number of
3151 open files and the number of processes (where that is accessible) are
3152 sufficiently large, or are unset, in case Exim has been called from an
3153 environment where the limits are screwed down. Not all OS have the ability to
3154 change some of these limits. */
3158 DEBUG(D_any) debug_print_ids(US"Exim has no root privilege:");
3164 #ifdef RLIMIT_NOFILE
3165 if (getrlimit(RLIMIT_NOFILE, &rlp) < 0)
3167 log_write(0, LOG_MAIN|LOG_PANIC, "getrlimit(RLIMIT_NOFILE) failed: %s",
3169 rlp.rlim_cur = rlp.rlim_max = 0;
3172 /* I originally chose 1000 as a nice big number that was unlikely to
3173 be exceeded. It turns out that some older OS have a fixed upper limit of
3176 if (rlp.rlim_cur < 1000)
3178 rlp.rlim_cur = rlp.rlim_max = 1000;
3179 if (setrlimit(RLIMIT_NOFILE, &rlp) < 0)
3181 rlp.rlim_cur = rlp.rlim_max = 256;
3182 if (setrlimit(RLIMIT_NOFILE, &rlp) < 0)
3183 log_write(0, LOG_MAIN|LOG_PANIC, "setrlimit(RLIMIT_NOFILE) failed: %s",
3190 if (getrlimit(RLIMIT_NPROC, &rlp) < 0)
3192 log_write(0, LOG_MAIN|LOG_PANIC, "getrlimit(RLIMIT_NPROC) failed: %s",
3194 rlp.rlim_cur = rlp.rlim_max = 0;
3197 #ifdef RLIM_INFINITY
3198 if (rlp.rlim_cur != RLIM_INFINITY && rlp.rlim_cur < 1000)
3200 rlp.rlim_cur = rlp.rlim_max = RLIM_INFINITY;
3202 if (rlp.rlim_cur < 1000)
3204 rlp.rlim_cur = rlp.rlim_max = 1000;
3206 if (setrlimit(RLIMIT_NPROC, &rlp) < 0)
3207 log_write(0, LOG_MAIN|LOG_PANIC, "setrlimit(RLIMIT_NPROC) failed: %s",
3213 /* Exim is normally entered as root (but some special configurations are
3214 possible that don't do this). However, it always spins off sub-processes that
3215 set their uid and gid as required for local delivery. We don't want to pass on
3216 any extra groups that root may belong to, so we want to get rid of them all at
3219 We need to obey setgroups() at this stage, before possibly giving up root
3220 privilege for a changed configuration file, but later on we might need to
3221 check on the additional groups for the admin user privilege - can't do that
3222 till after reading the config, which might specify the exim gid. Therefore,
3223 save the group list here first. */
3225 group_count = getgroups(NGROUPS_MAX, group_list);
3227 /* There is a fundamental difference in some BSD systems in the matter of
3228 groups. FreeBSD and BSDI are known to be different; NetBSD and OpenBSD are
3229 known not to be different. On the "different" systems there is a single group
3230 list, and the first entry in it is the current group. On all other versions of
3231 Unix there is a supplementary group list, which is in *addition* to the current
3232 group. Consequently, to get rid of all extraneous groups on a "standard" system
3233 you pass over 0 groups to setgroups(), while on a "different" system you pass
3234 over a single group - the current group, which is always the first group in the
3235 list. Calling setgroups() with zero groups on a "different" system results in
3236 an error return. The following code should cope with both types of system.
3238 However, if this process isn't running as root, setgroups() can't be used
3239 since you have to be root to run it, even if throwing away groups. Not being
3240 root here happens only in some unusual configurations. We just ignore the
3243 if (setgroups(0, NULL) != 0)
3245 if (setgroups(1, group_list) != 0 && !unprivileged)
3247 fprintf(stderr, "exim: setgroups() failed: %s\n", strerror(errno));
3252 /* If the configuration file name has been altered by an argument on the
3253 command line (either a new file name or a macro definition) and the caller is
3254 not root, or if this is a filter testing run, remove any setuid privilege the
3255 program has and run as the underlying user.
3257 The exim user is locked out of this, which severely restricts the use of -C
3260 Otherwise, set the real ids to the effective values (should be root unless run
3261 from inetd, which it can either be root or the exim uid, if one is configured).
3263 There is a private mechanism for bypassing some of this, in order to make it
3264 possible to test lots of configurations automatically, without having either to
3265 recompile each time, or to patch in an actual configuration file name and other
3266 values (such as the path name). If running in the test harness, pretend that
3267 configuration file changes and macro definitions haven't happened. */
3270 (!trusted_config || /* Config changed, or */
3271 !macros_trusted()) && /* impermissible macros and */
3272 real_uid != root_uid && /* Not root, and */
3273 !running_in_test_harness /* Not fudged */
3275 expansion_test /* expansion testing */
3277 filter_test != FTEST_NONE) /* Filter testing */
3279 setgroups(group_count, group_list);
3280 exim_setugid(real_uid, real_gid, FALSE,
3281 US"-C, -D, -be or -bf forces real uid");
3282 removed_privilege = TRUE;
3284 /* In the normal case when Exim is called like this, stderr is available
3285 and should be used for any logging information because attempts to write
3286 to the log will usually fail. To arrange this, we unset really_exim. However,
3287 if no stderr is available there is no point - we might as well have a go
3288 at the log (if it fails, syslog will be written). */
3290 if (log_stderr != NULL) really_exim = FALSE;
3293 /* Privilege is to be retained for the moment. It may be dropped later,
3294 depending on the job that this Exim process has been asked to do. For now, set
3295 the real uid to the effective so that subsequent re-execs of Exim are done by a
3298 else exim_setugid(geteuid(), getegid(), FALSE, US"forcing real = effective");
3300 /* If testing a filter, open the file(s) now, before wasting time doing other
3301 setups and reading the message. */
3303 if ((filter_test & FTEST_SYSTEM) != 0)
3305 filter_sfd = Uopen(filter_test_sfile, O_RDONLY, 0);
3308 fprintf(stderr, "exim: failed to open %s: %s\n", filter_test_sfile,
3310 return EXIT_FAILURE;
3314 if ((filter_test & FTEST_USER) != 0)
3316 filter_ufd = Uopen(filter_test_ufile, O_RDONLY, 0);
3319 fprintf(stderr, "exim: failed to open %s: %s\n", filter_test_ufile,
3321 return EXIT_FAILURE;
3325 /* Read the main runtime configuration data; this gives up if there
3326 is a failure. It leaves the configuration file open so that the subsequent
3327 configuration data for delivery can be read if needed. */
3331 /* Handle the decoding of logging options. */
3333 decode_bits(&log_write_selector, &log_extra_selector, 0, 0,
3334 log_selector_string, log_options, log_options_count, US"log", 0);
3338 debug_printf("configuration file is %s\n", config_main_filename);
3339 debug_printf("log selectors = %08x %08x\n", log_write_selector,
3340 log_extra_selector);
3343 /* If domain literals are not allowed, check the sender address that was
3344 supplied with -f. Ditto for a stripped trailing dot. */
3346 if (sender_address != NULL)
3348 if (sender_address[sender_address_domain] == '[' && !allow_domain_literals)
3350 fprintf(stderr, "exim: bad -f address \"%s\": domain literals not "
3351 "allowed\n", sender_address);
3352 return EXIT_FAILURE;
3354 if (f_end_dot && !strip_trailing_dot)
3356 fprintf(stderr, "exim: bad -f address \"%s.\": domain is malformed "
3357 "(trailing dot not allowed)\n", sender_address);
3358 return EXIT_FAILURE;
3362 /* Paranoia check of maximum lengths of certain strings. There is a check
3363 on the length of the log file path in log.c, which will come into effect
3364 if there are any calls to write the log earlier than this. However, if we
3365 get this far but the string is very long, it is better to stop now than to
3366 carry on and (e.g.) receive a message and then have to collapse. The call to
3367 log_write() from here will cause the ultimate panic collapse if the complete
3368 file name exceeds the buffer length. */
3370 if (Ustrlen(log_file_path) > 200)
3371 log_write(0, LOG_MAIN|LOG_PANIC_DIE,
3372 "log_file_path is longer than 200 chars: aborting");
3374 if (Ustrlen(pid_file_path) > 200)
3375 log_write(0, LOG_MAIN|LOG_PANIC_DIE,
3376 "pid_file_path is longer than 200 chars: aborting");
3378 if (Ustrlen(spool_directory) > 200)
3379 log_write(0, LOG_MAIN|LOG_PANIC_DIE,
3380 "spool_directory is longer than 200 chars: aborting");
3382 /* Length check on the process name given to syslog for its TAG field,
3383 which is only permitted to be 32 characters or less. See RFC 3164. */
3385 if (Ustrlen(syslog_processname) > 32)
3386 log_write(0, LOG_MAIN|LOG_PANIC_DIE,
3387 "syslog_processname is longer than 32 chars: aborting");
3389 /* In some operating systems, the environment variable TMPDIR controls where
3390 temporary files are created; Exim doesn't use these (apart from when delivering
3391 to MBX mailboxes), but called libraries such as DBM libraries may require them.
3392 If TMPDIR is found in the environment, reset it to the value defined in the
3393 TMPDIR macro, if this macro is defined. */
3398 for (p = USS environ; *p != NULL; p++)
3400 if (Ustrncmp(*p, "TMPDIR=", 7) == 0 &&
3401 Ustrcmp(*p+7, TMPDIR) != 0)
3403 uschar *newp = malloc(Ustrlen(TMPDIR) + 8);
3404 sprintf(CS newp, "TMPDIR=%s", TMPDIR);
3406 DEBUG(D_any) debug_printf("reset TMPDIR=%s in environment\n", TMPDIR);
3412 /* Timezone handling. If timezone_string is "utc", set a flag to cause all
3413 timestamps to be in UTC (gmtime() is used instead of localtime()). Otherwise,
3414 we may need to get rid of a bogus timezone setting. This can arise when Exim is
3415 called by a user who has set the TZ variable. This then affects the timestamps
3416 in log files and in Received: headers, and any created Date: header lines. The
3417 required timezone is settable in the configuration file, so nothing can be done
3418 about this earlier - but hopefully nothing will normally be logged earlier than
3419 this. We have to make a new environment if TZ is wrong, but don't bother if
3420 timestamps_utc is set, because then all times are in UTC anyway. */
3422 if (timezone_string != NULL && strcmpic(timezone_string, US"UTC") == 0)
3424 timestamps_utc = TRUE;
3428 uschar *envtz = US getenv("TZ");
3429 if ((envtz == NULL && timezone_string != NULL) ||
3431 (timezone_string == NULL ||
3432 Ustrcmp(timezone_string, envtz) != 0)))
3434 uschar **p = USS environ;
3438 while (*p++ != NULL) count++;
3439 if (envtz == NULL) count++;
3440 newp = new = malloc(sizeof(uschar *) * (count + 1));
3441 for (p = USS environ; *p != NULL; p++)
3443 if (Ustrncmp(*p, "TZ=", 3) == 0) continue;
3446 if (timezone_string != NULL)
3448 *newp = malloc(Ustrlen(timezone_string) + 4);
3449 sprintf(CS *newp++, "TZ=%s", timezone_string);
3454 DEBUG(D_any) debug_printf("Reset TZ to %s: time is %s\n", timezone_string,
3455 tod_stamp(tod_log));
3459 /* Handle the case when we have removed the setuid privilege because of -C or
3460 -D. This means that the caller of Exim was not root.
3462 There is a problem if we were running as the Exim user. The sysadmin may
3463 expect this case to retain privilege because "the binary was called by the
3464 Exim user", but it hasn't, because either the -D option set macros, or the
3465 -C option set a non-trusted configuration file. There are two possibilities:
3467 (1) If deliver_drop_privilege is set, Exim is not going to re-exec in order
3468 to do message deliveries. Thus, the fact that it is running as a
3469 non-privileged user is plausible, and might be wanted in some special
3470 configurations. However, really_exim will have been set false when
3471 privilege was dropped, to stop Exim trying to write to its normal log
3472 files. Therefore, re-enable normal log processing, assuming the sysadmin
3473 has set up the log directory correctly.
3475 (2) If deliver_drop_privilege is not set, the configuration won't work as
3476 apparently intended, and so we log a panic message. In order to retain
3477 root for -C or -D, the caller must either be root or be invoking a
3478 trusted configuration file (when deliver_drop_privilege is false). */
3480 if (removed_privilege && (!trusted_config || macros != NULL) &&
3481 real_uid == exim_uid)
3483 if (deliver_drop_privilege)
3484 really_exim = TRUE; /* let logging work normally */
3486 log_write(0, LOG_MAIN|LOG_PANIC,
3487 "exim user lost privilege for using %s option",
3488 trusted_config? "-D" : "-C");
3491 /* Start up Perl interpreter if Perl support is configured and there is a
3492 perl_startup option, and the configuration or the command line specifies
3493 initializing starting. Note that the global variables are actually called
3494 opt_perl_xxx to avoid clashing with perl's namespace (perl_*). */
3497 if (perl_start_option != 0)
3498 opt_perl_at_start = (perl_start_option > 0);
3499 if (opt_perl_at_start && opt_perl_startup != NULL)
3502 DEBUG(D_any) debug_printf("Starting Perl interpreter\n");
3503 errstr = init_perl(opt_perl_startup);
3506 fprintf(stderr, "exim: error in perl_startup code: %s\n", errstr);
3507 return EXIT_FAILURE;
3509 opt_perl_started = TRUE;
3511 #endif /* EXIM_PERL */
3513 /* Initialise lookup_list */
3514 extern void init_lookup_list(void);
3517 /* Log the arguments of the call if the configuration file said so. This is
3518 a debugging feature for finding out what arguments certain MUAs actually use.
3519 Don't attempt it if logging is disabled, or if listing variables or if
3520 verifying/testing addresses or expansions. */
3522 if (((debug_selector & D_any) != 0 || (log_extra_selector & LX_arguments) != 0)
3523 && really_exim && !list_options && !checking)
3526 uschar *p = big_buffer;
3528 (void)getcwd(CS p+4, big_buffer_size - 4);
3530 (void)string_format(p, big_buffer_size - (p - big_buffer), " %d args:", argc);
3532 for (i = 0; i < argc; i++)
3534 int len = Ustrlen(argv[i]);
3537 if (p + len + 8 >= big_buffer + big_buffer_size)
3540 log_write(0, LOG_MAIN, "%s", big_buffer);
3541 Ustrcpy(big_buffer, "...");
3544 printing = string_printing(argv[i]);
3545 if (printing[0] == 0) quote = US"\""; else
3547 uschar *pp = printing;
3549 while (*pp != 0) if (isspace(*pp++)) { quote = US"\""; break; }
3551 sprintf(CS p, " %s%.*s%s", quote, (int)(big_buffer_size -
3552 (p - big_buffer) - 4), printing, quote);
3556 if ((log_extra_selector & LX_arguments) != 0)
3557 log_write(0, LOG_MAIN, "%s", big_buffer);
3559 debug_printf("%s\n", big_buffer);
3562 /* Set the working directory to be the top-level spool directory. We don't rely
3563 on this in the code, which always uses fully qualified names, but it's useful
3564 for core dumps etc. Don't complain if it fails - the spool directory might not
3565 be generally accessible and calls with the -C option (and others) have lost
3566 privilege by now. Before the chdir, we try to ensure that the directory exists.
3569 if (Uchdir(spool_directory) != 0)
3571 (void)directory_make(spool_directory, US"", SPOOL_DIRECTORY_MODE, FALSE);
3572 (void)Uchdir(spool_directory);
3575 /* Handle calls with the -bi option. This is a sendmail option to rebuild *the*
3576 alias file. Exim doesn't have such a concept, but this call is screwed into
3577 Sun's YP makefiles. Handle this by calling a configured script, as the real
3578 user who called Exim. The -oA option can be used to pass an argument to the
3583 (void)fclose(config_file);
3584 if (bi_command != NULL)
3588 argv[i++] = bi_command;
3589 if (alias_arg != NULL) argv[i++] = alias_arg;
3592 setgroups(group_count, group_list);
3593 exim_setugid(real_uid, real_gid, FALSE, US"running bi_command");
3595 DEBUG(D_exec) debug_printf("exec %.256s %.256s\n", argv[0],
3596 (argv[1] == NULL)? US"" : argv[1]);
3598 execv(CS argv[0], (char *const *)argv);
3599 fprintf(stderr, "exim: exec failed: %s\n", strerror(errno));
3604 DEBUG(D_any) debug_printf("-bi used but bi_command not set; exiting\n");
3609 /* If an action on specific messages is requested, or if a daemon or queue
3610 runner is being started, we need to know if Exim was called by an admin user.
3611 This is the case if the real user is root or exim, or if the real group is
3612 exim, or if one of the supplementary groups is exim or a group listed in
3613 admin_groups. We don't fail all message actions immediately if not admin_user,
3614 since some actions can be performed by non-admin users. Instead, set admin_user
3615 for later interrogation. */
3617 if (real_uid == root_uid || real_uid == exim_uid || real_gid == exim_gid)
3622 for (i = 0; i < group_count; i++)
3624 if (group_list[i] == exim_gid) admin_user = TRUE;
3625 else if (admin_groups != NULL)
3627 for (j = 1; j <= (int)(admin_groups[0]); j++)
3628 if (admin_groups[j] == group_list[i])
3629 { admin_user = TRUE; break; }
3631 if (admin_user) break;
3635 /* Another group of privileged users are the trusted users. These are root,
3636 exim, and any caller matching trusted_users or trusted_groups. Trusted callers
3637 are permitted to specify sender_addresses with -f on the command line, and
3638 other message parameters as well. */
3640 if (real_uid == root_uid || real_uid == exim_uid)
3641 trusted_caller = TRUE;
3646 if (trusted_users != NULL)
3648 for (i = 1; i <= (int)(trusted_users[0]); i++)
3649 if (trusted_users[i] == real_uid)
3650 { trusted_caller = TRUE; break; }
3653 if (!trusted_caller && trusted_groups != NULL)
3655 for (i = 1; i <= (int)(trusted_groups[0]); i++)
3657 if (trusted_groups[i] == real_gid)
3658 trusted_caller = TRUE;
3659 else for (j = 0; j < group_count; j++)
3661 if (trusted_groups[i] == group_list[j])
3662 { trusted_caller = TRUE; break; }
3664 if (trusted_caller) break;
3669 if (trusted_caller) DEBUG(D_any) debug_printf("trusted user\n");
3670 if (admin_user) DEBUG(D_any) debug_printf("admin user\n");
3672 /* Only an admin user may start the daemon or force a queue run in the default
3673 configuration, but the queue run restriction can be relaxed. Only an admin
3674 user may request that a message be returned to its sender forthwith. Only an
3675 admin user may specify a debug level greater than D_v (because it might show
3676 passwords, etc. in lookup queries). Only an admin user may request a queue
3677 count. Only an admin user can use the test interface to scan for email
3678 (because Exim will be in the spool dir and able to look at mails). */
3682 BOOL debugset = (debug_selector & ~D_v) != 0;
3683 if (deliver_give_up || daemon_listen || malware_test_file ||
3684 (count_queue && queue_list_requires_admin) ||
3685 (list_queue && queue_list_requires_admin) ||
3686 (queue_interval >= 0 && prod_requires_admin) ||
3687 (debugset && !running_in_test_harness))
3689 fprintf(stderr, "exim:%s permission denied\n", debugset? " debugging" : "");
3694 /* If the real user is not root or the exim uid, the argument for passing
3695 in an open TCP/IP connection for another message is not permitted, nor is
3696 running with the -N option for any delivery action, unless this call to exim is
3697 one that supplied an input message, or we are using a patched exim for
3698 regression testing. */
3700 if (real_uid != root_uid && real_uid != exim_uid &&
3701 (continue_hostname != NULL ||
3703 (queue_interval >= 0 || daemon_listen || msg_action_arg > 0)
3704 )) && !running_in_test_harness)
3706 fprintf(stderr, "exim: Permission denied\n");
3707 return EXIT_FAILURE;
3710 /* If the caller is not trusted, certain arguments are ignored when running for
3711 real, but are permitted when checking things (-be, -bv, -bt, -bh, -bf, -bF).
3712 Note that authority for performing certain actions on messages is tested in the
3713 queue_action() function. */
3715 if (!trusted_caller && !checking && filter_test == FTEST_NONE)
3717 sender_host_name = sender_host_address = interface_address =
3718 sender_ident = received_protocol = NULL;
3719 sender_host_port = interface_port = 0;
3720 sender_host_authenticated = authenticated_sender = authenticated_id = NULL;
3723 /* If a sender host address is set, extract the optional port number off the
3724 end of it and check its syntax. Do the same thing for the interface address.
3725 Exim exits if the syntax is bad. */
3729 if (sender_host_address != NULL)
3730 sender_host_port = check_port(sender_host_address);
3731 if (interface_address != NULL)
3732 interface_port = check_port(interface_address);
3735 /* If an SMTP message is being received check to see if the standard input is a
3736 TCP/IP socket. If it is, we assume that Exim was called from inetd if the
3737 caller is root or the Exim user, or if the port is a privileged one. Otherwise,
3742 union sockaddr_46 inetd_sock;
3743 EXIM_SOCKLEN_T size = sizeof(inetd_sock);
3744 if (getpeername(0, (struct sockaddr *)(&inetd_sock), &size) == 0)
3746 int family = ((struct sockaddr *)(&inetd_sock))->sa_family;
3747 if (family == AF_INET || family == AF_INET6)
3749 union sockaddr_46 interface_sock;
3750 size = sizeof(interface_sock);
3752 if (getsockname(0, (struct sockaddr *)(&interface_sock), &size) == 0)
3753 interface_address = host_ntoa(-1, &interface_sock, NULL,
3756 if (host_is_tls_on_connect_port(interface_port)) tls_on_connect = TRUE;
3758 if (real_uid == root_uid || real_uid == exim_uid || interface_port < 1024)
3761 sender_host_address = host_ntoa(-1, (struct sockaddr *)(&inetd_sock),
3762 NULL, &sender_host_port);
3763 if (mua_wrapper) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Input from "
3764 "inetd is not supported when mua_wrapper is set");
3769 "exim: Permission denied (unprivileged user, unprivileged port)\n");
3770 return EXIT_FAILURE;
3776 /* If the load average is going to be needed while receiving a message, get it
3777 now for those OS that require the first call to os_getloadavg() to be done as
3778 root. There will be further calls later for each message received. */
3780 #ifdef LOAD_AVG_NEEDS_ROOT
3781 if (receiving_message &&
3782 (queue_only_load >= 0 ||
3783 (is_inetd && smtp_load_reserve >= 0)
3786 load_average = OS_GETLOADAVG();
3790 /* The queue_only configuration option can be overridden by -odx on the command
3791 line, except that if queue_only_override is false, queue_only cannot be unset
3792 from the command line. */
3794 if (queue_only_set && (queue_only_override || arg_queue_only))
3795 queue_only = arg_queue_only;
3797 /* The receive_timeout and smtp_receive_timeout options can be overridden by
3800 if (arg_receive_timeout >= 0) receive_timeout = arg_receive_timeout;
3801 if (arg_smtp_receive_timeout >= 0)
3802 smtp_receive_timeout = arg_smtp_receive_timeout;
3804 /* If Exim was started with root privilege, unless we have already removed the
3805 root privilege above as a result of -C, -D, -be, -bf or -bF, remove it now
3806 except when starting the daemon or doing some kind of delivery or address
3807 testing (-bt). These are the only cases when root need to be retained. We run
3808 as exim for -bv and -bh. However, if deliver_drop_privilege is set, root is
3809 retained only for starting the daemon. We always do the initgroups() in this
3810 situation (controlled by the TRUE below), in order to be as close as possible
3811 to the state Exim usually runs in. */
3813 if (!unprivileged && /* originally had root AND */
3814 !removed_privilege && /* still got root AND */
3815 !daemon_listen && /* not starting the daemon */
3816 queue_interval <= 0 && /* (either kind of daemon) */
3818 deliver_drop_privilege || /* requested unprivileged */
3820 queue_interval < 0 && /* not running the queue */
3821 (msg_action_arg < 0 || /* and */
3822 msg_action != MSG_DELIVER) && /* not delivering and */
3823 (!checking || !address_test_mode) /* not address checking */
3827 exim_setugid(exim_uid, exim_gid, TRUE, US"privilege not needed");
3830 /* When we are retaining a privileged uid, we still change to the exim gid. */
3832 else setgid(exim_gid);
3834 /* Handle a request to scan a file for malware */
3835 if (malware_test_file)
3837 #ifdef WITH_CONTENT_SCAN
3839 set_process_info("scanning file for malware");
3840 result = malware_in_file(malware_test_file);
3843 printf("No malware found.\n");
3848 printf("Malware lookup returned non-okay/fail: %d\n", result);
3852 printf("Malware found: %s\n", malware_name);
3854 printf("Malware scan detected malware of unknown name.\n");
3856 printf("Malware scanning not enabled at compile time.\n");
3861 /* Handle a request to list the delivery queue */
3865 set_process_info("listing the queue");
3866 queue_list(list_queue_option, argv + recipients_arg, argc - recipients_arg);
3870 /* Handle a request to count the delivery queue */
3874 set_process_info("counting the queue");
3879 /* Handle actions on specific messages, except for the force delivery and
3880 message load actions, which are done below. Some actions take a whole list of
3881 message ids, which are known to continue up to the end of the arguments. Others
3882 take a single message id and then operate on the recipients list. */
3884 if (msg_action_arg > 0 && msg_action != MSG_DELIVER && msg_action != MSG_LOAD)
3886 int yield = EXIT_SUCCESS;
3887 set_process_info("acting on specified messages");
3889 if (!one_msg_action)
3891 for (i = msg_action_arg; i < argc; i++)
3892 if (!queue_action(argv[i], msg_action, NULL, 0, 0))
3893 yield = EXIT_FAILURE;
3896 else if (!queue_action(argv[msg_action_arg], msg_action, argv, argc,
3897 recipients_arg)) yield = EXIT_FAILURE;
3901 /* All the modes below here require the remaining configuration sections
3902 to be read, except that we can skip over the ACL setting when delivering
3903 specific messages, or doing a queue run. (For various testing cases we could
3904 skip too, but as they are rare, it doesn't really matter.) The argument is TRUE
3907 readconf_rest(msg_action_arg > 0 || (queue_interval == 0 && !daemon_listen));
3909 /* The configuration data will have been read into POOL_PERM because we won't
3910 ever want to reset back past it. Change the current pool to POOL_MAIN. In fact,
3911 this is just a bit of pedantic tidiness. It wouldn't really matter if the
3912 configuration were read into POOL_MAIN, because we don't do any resets till
3913 later on. However, it seems right, and it does ensure that both pools get used.
3916 store_pool = POOL_MAIN;
3918 /* Handle the -brt option. This is for checking out retry configurations.
3919 The next three arguments are a domain name or a complete address, and
3920 optionally two error numbers. All it does is to call the function that
3921 scans the retry configuration data. */
3923 if (test_retry_arg >= 0)
3925 retry_config *yield;
3926 int basic_errno = 0;
3930 if (test_retry_arg >= argc)
3932 printf("-brt needs a domain or address argument\n");
3933 exim_exit(EXIT_FAILURE);
3935 s1 = argv[test_retry_arg++];
3938 /* If the first argument contains no @ and no . it might be a local user
3939 or it might be a single-component name. Treat as a domain. */
3941 if (Ustrchr(s1, '@') == NULL && Ustrchr(s1, '.') == NULL)
3943 printf("Warning: \"%s\" contains no '@' and no '.' characters. It is "
3944 "being \ntreated as a one-component domain, not as a local part.\n\n",
3948 /* There may be an optional second domain arg. */
3950 if (test_retry_arg < argc && Ustrchr(argv[test_retry_arg], '.') != NULL)
3951 s2 = argv[test_retry_arg++];
3953 /* The final arg is an error name */
3955 if (test_retry_arg < argc)
3957 uschar *ss = argv[test_retry_arg];
3959 readconf_retry_error(ss, ss + Ustrlen(ss), &basic_errno, &more_errno);
3962 printf("%s\n", CS error);
3963 return EXIT_FAILURE;
3966 /* For the {MAIL,RCPT,DATA}_4xx errors, a value of 255 means "any", and a
3967 code > 100 as an error is for matching codes to the decade. Turn them into
3968 a real error code, off the decade. */
3970 if (basic_errno == ERRNO_MAIL4XX ||
3971 basic_errno == ERRNO_RCPT4XX ||
3972 basic_errno == ERRNO_DATA4XX)
3974 int code = (more_errno >> 8) & 255;
3976 more_errno = (more_errno & 0xffff00ff) | (21 << 8);
3977 else if (code > 100)
3978 more_errno = (more_errno & 0xffff00ff) | ((code - 96) << 8);
3982 yield = retry_find_config(s1, s2, basic_errno, more_errno);
3983 if (yield == NULL) printf("No retry information found\n"); else
3986 more_errno = yield->more_errno;
3987 printf("Retry rule: %s ", yield->pattern);
3989 if (yield->basic_errno == ERRNO_EXIMQUOTA)
3991 printf("quota%s%s ",
3992 (more_errno > 0)? "_" : "",
3993 (more_errno > 0)? readconf_printtime(more_errno) : US"");
3995 else if (yield->basic_errno == ECONNREFUSED)
3997 printf("refused%s%s ",
3998 (more_errno > 0)? "_" : "",
3999 (more_errno == 'M')? "MX" :
4000 (more_errno == 'A')? "A" : "");
4002 else if (yield->basic_errno == ETIMEDOUT)
4005 if ((more_errno & RTEF_CTOUT) != 0) printf("_connect");
4007 if (more_errno != 0) printf("_%s",
4008 (more_errno == 'M')? "MX" : "A");
4011 else if (yield->basic_errno == ERRNO_AUTHFAIL)
4012 printf("auth_failed ");
4015 for (r = yield->rules; r != NULL; r = r->next)
4017 printf("%c,%s", r->rule, readconf_printtime(r->timeout)); /* Do not */
4018 printf(",%s", readconf_printtime(r->p1)); /* amalgamate */
4024 printf(",%d.", x/1000);
4038 exim_exit(EXIT_SUCCESS);
4041 /* Handle a request to list one or more configuration options */
4045 set_process_info("listing variables");
4046 if (recipients_arg >= argc) readconf_print(US"all", NULL);
4047 else for (i = recipients_arg; i < argc; i++)
4050 (Ustrcmp(argv[i], "router") == 0 ||
4051 Ustrcmp(argv[i], "transport") == 0 ||
4052 Ustrcmp(argv[i], "authenticator") == 0 ||
4053 Ustrcmp(argv[i], "macro") == 0))
4055 readconf_print(argv[i+1], argv[i]);
4058 else readconf_print(argv[i], NULL);
4060 exim_exit(EXIT_SUCCESS);
4064 /* Handle a request to deliver one or more messages that are already on the
4065 queue. Values of msg_action other than MSG_DELIVER and MSG_LOAD are dealt with
4066 above. MSG_LOAD is handled with -be (which is the only time it applies) below.
4068 Delivery of specific messages is typically used for a small number when
4069 prodding by hand (when the option forced_delivery will be set) or when
4070 re-execing to regain root privilege. Each message delivery must happen in a
4071 separate process, so we fork a process for each one, and run them sequentially
4072 so that debugging output doesn't get intertwined, and to avoid spawning too
4073 many processes if a long list is given. However, don't fork for the last one;
4074 this saves a process in the common case when Exim is called to deliver just one
4077 if (msg_action_arg > 0 && msg_action != MSG_LOAD)
4079 if (prod_requires_admin && !admin_user)
4081 fprintf(stderr, "exim: Permission denied\n");
4082 exim_exit(EXIT_FAILURE);
4084 set_process_info("delivering specified messages");
4085 if (deliver_give_up) forced_delivery = deliver_force_thaw = TRUE;
4086 for (i = msg_action_arg; i < argc; i++)
4091 (void)deliver_message(argv[i], forced_delivery, deliver_give_up);
4092 else if ((pid = fork()) == 0)
4094 (void)deliver_message(argv[i], forced_delivery, deliver_give_up);
4095 _exit(EXIT_SUCCESS);
4099 fprintf(stderr, "failed to fork delivery process for %s: %s\n", argv[i],
4101 exim_exit(EXIT_FAILURE);
4105 exim_exit(EXIT_SUCCESS);
4109 /* If only a single queue run is requested, without SMTP listening, we can just
4110 turn into a queue runner, with an optional starting message id. */
4112 if (queue_interval == 0 && !daemon_listen)
4114 DEBUG(D_queue_run) debug_printf("Single queue run%s%s%s%s\n",
4115 (start_queue_run_id == NULL)? US"" : US" starting at ",
4116 (start_queue_run_id == NULL)? US"" : start_queue_run_id,
4117 (stop_queue_run_id == NULL)? US"" : US" stopping at ",
4118 (stop_queue_run_id == NULL)? US"" : stop_queue_run_id);
4119 set_process_info("running the queue (single queue run)");
4120 queue_run(start_queue_run_id, stop_queue_run_id, FALSE);
4121 exim_exit(EXIT_SUCCESS);
4125 /* Find the login name of the real user running this process. This is always
4126 needed when receiving a message, because it is written into the spool file. It
4127 may also be used to construct a from: or a sender: header, and in this case we
4128 need the user's full name as well, so save a copy of it, checked for RFC822
4129 syntax and munged if necessary, if it hasn't previously been set by the -F
4130 argument. We may try to get the passwd entry more than once, in case NIS or
4131 other delays are in evidence. Save the home directory for use in filter testing
4136 if ((pw = getpwuid(real_uid)) != NULL)
4138 originator_login = string_copy(US pw->pw_name);
4139 originator_home = string_copy(US pw->pw_dir);
4141 /* If user name has not been set by -F, set it from the passwd entry
4142 unless -f has been used to set the sender address by a trusted user. */
4144 if (originator_name == NULL)
4146 if (sender_address == NULL ||
4147 (!trusted_caller && filter_test == FTEST_NONE))
4149 uschar *name = US pw->pw_gecos;
4150 uschar *amp = Ustrchr(name, '&');
4153 /* Most Unix specify that a '&' character in the gecos field is
4154 replaced by a copy of the login name, and some even specify that
4155 the first character should be upper cased, so that's what we do. */
4160 string_format(buffer, sizeof(buffer), "%.*s%n%s%s",
4161 amp - name, name, &loffset, originator_login, amp + 1);
4162 buffer[loffset] = toupper(buffer[loffset]);
4166 /* If a pattern for matching the gecos field was supplied, apply
4167 it and then expand the name string. */
4169 if (gecos_pattern != NULL && gecos_name != NULL)
4172 re = regex_must_compile(gecos_pattern, FALSE, TRUE); /* Use malloc */
4174 if (regex_match_and_setup(re, name, 0, -1))
4176 uschar *new_name = expand_string(gecos_name);
4178 if (new_name != NULL)
4180 DEBUG(D_receive) debug_printf("user name \"%s\" extracted from "
4181 "gecos field \"%s\"\n", new_name, name);
4184 else DEBUG(D_receive) debug_printf("failed to expand gecos_name string "
4185 "\"%s\": %s\n", gecos_name, expand_string_message);
4187 else DEBUG(D_receive) debug_printf("gecos_pattern \"%s\" did not match "
4188 "gecos field \"%s\"\n", gecos_pattern, name);
4189 store_free((void *)re);
4191 originator_name = string_copy(name);
4194 /* A trusted caller has used -f but not -F */
4196 else originator_name = US"";
4199 /* Break the retry loop */
4204 if (++i > finduser_retries) break;
4208 /* If we cannot get a user login, log the incident and give up, unless the
4209 configuration specifies something to use. When running in the test harness,
4210 any setting of unknown_login overrides the actual name. */
4212 if (originator_login == NULL || running_in_test_harness)
4214 if (unknown_login != NULL)
4216 originator_login = expand_string(unknown_login);
4217 if (originator_name == NULL && unknown_username != NULL)
4218 originator_name = expand_string(unknown_username);
4219 if (originator_name == NULL) originator_name = US"";
4221 if (originator_login == NULL)
4222 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Failed to get user name for uid %d",
4226 /* Ensure that the user name is in a suitable form for use as a "phrase" in an
4229 originator_name = string_copy(parse_fix_phrase(originator_name,
4230 Ustrlen(originator_name), big_buffer, big_buffer_size));
4232 /* If a message is created by this call of Exim, the uid/gid of its originator
4233 are those of the caller. These values are overridden if an existing message is
4234 read in from the spool. */
4236 originator_uid = real_uid;
4237 originator_gid = real_gid;
4239 DEBUG(D_receive) debug_printf("originator: uid=%d gid=%d login=%s name=%s\n",
4240 (int)originator_uid, (int)originator_gid, originator_login, originator_name);
4242 /* Run in daemon and/or queue-running mode. The function daemon_go() never
4243 returns. We leave this till here so that the originator_ fields are available
4244 for incoming messages via the daemon. The daemon cannot be run in mua_wrapper
4247 if (daemon_listen || queue_interval > 0)
4251 fprintf(stderr, "Daemon cannot be run when mua_wrapper is set\n");
4252 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Daemon cannot be run when "
4253 "mua_wrapper is set");
4258 /* If the sender ident has not been set (by a trusted caller) set it to
4259 the caller. This will get overwritten below for an inetd call. If a trusted
4260 caller has set it empty, unset it. */
4262 if (sender_ident == NULL) sender_ident = originator_login;
4263 else if (sender_ident[0] == 0) sender_ident = NULL;
4265 /* Handle the -brw option, which is for checking out rewriting rules. Cause log
4266 writes (on errors) to go to stderr instead. Can't do this earlier, as want the
4267 originator_* variables set. */
4269 if (test_rewrite_arg >= 0)
4271 really_exim = FALSE;
4272 if (test_rewrite_arg >= argc)
4274 printf("-brw needs an address argument\n");
4275 exim_exit(EXIT_FAILURE);
4277 rewrite_test(argv[test_rewrite_arg]);
4278 exim_exit(EXIT_SUCCESS);
4281 /* A locally-supplied message is considered to be coming from a local user
4282 unless a trusted caller supplies a sender address with -f, or is passing in the
4283 message via SMTP (inetd invocation or otherwise). */
4285 if ((sender_address == NULL && !smtp_input) ||
4286 (!trusted_caller && filter_test == FTEST_NONE))
4288 sender_local = TRUE;
4290 /* A trusted caller can supply authenticated_sender and authenticated_id
4291 via -oMas and -oMai and if so, they will already be set. Otherwise, force
4292 defaults except when host checking. */
4294 if (authenticated_sender == NULL && !host_checking)
4295 authenticated_sender = string_sprintf("%s@%s", originator_login,
4296 qualify_domain_sender);
4297 if (authenticated_id == NULL && !host_checking)
4298 authenticated_id = originator_login;
4301 /* Trusted callers are always permitted to specify the sender address.
4302 Untrusted callers may specify it if it matches untrusted_set_sender, or if what
4303 is specified is the empty address. However, if a trusted caller does not
4304 specify a sender address for SMTP input, we leave sender_address unset. This
4305 causes the MAIL commands to be honoured. */
4307 if ((!smtp_input && sender_address == NULL) ||
4308 !receive_check_set_sender(sender_address))
4310 /* Either the caller is not permitted to set a general sender, or this is
4311 non-SMTP input and the trusted caller has not set a sender. If there is no
4312 sender, or if a sender other than <> is set, override with the originator's
4313 login (which will get qualified below), except when checking things. */
4315 if (sender_address == NULL /* No sender_address set */
4317 (sender_address[0] != 0 && /* Non-empty sender address, AND */
4318 !checking && /* Not running tests, AND */
4319 filter_test == FTEST_NONE)) /* Not testing a filter */
4321 sender_address = originator_login;
4322 sender_address_forced = FALSE;
4323 sender_address_domain = 0;
4327 /* Remember whether an untrusted caller set the sender address */
4329 sender_set_untrusted = sender_address != originator_login && !trusted_caller;
4331 /* Ensure that the sender address is fully qualified unless it is the empty
4332 address, which indicates an error message, or doesn't exist (root caller, smtp
4333 interface, no -f argument). */
4335 if (sender_address != NULL && sender_address[0] != 0 &&
4336 sender_address_domain == 0)
4337 sender_address = string_sprintf("%s@%s", local_part_quote(sender_address),
4338 qualify_domain_sender);
4340 DEBUG(D_receive) debug_printf("sender address = %s\n", sender_address);
4342 /* Handle a request to verify a list of addresses, or test them for delivery.
4343 This must follow the setting of the sender address, since routers can be
4344 predicated upon the sender. If no arguments are given, read addresses from
4345 stdin. Set debug_level to at least D_v to get full output for address testing.
4348 if (verify_address_mode || address_test_mode)
4351 int flags = vopt_qualify;
4353 if (verify_address_mode)
4355 if (!verify_as_sender) flags |= vopt_is_recipient;
4356 DEBUG(D_verify) debug_print_ids(US"Verifying:");
4361 flags |= vopt_is_recipient;
4362 debug_selector |= D_v;
4363 debug_file = stderr;
4364 debug_fd = fileno(debug_file);
4365 DEBUG(D_verify) debug_print_ids(US"Address testing:");
4368 if (recipients_arg < argc)
4370 while (recipients_arg < argc)
4372 uschar *s = argv[recipients_arg++];
4375 BOOL finished = FALSE;
4376 uschar *ss = parse_find_address_end(s, FALSE);
4377 if (*ss == ',') *ss = 0; else finished = TRUE;
4378 test_address(s, flags, &exit_value);
4381 while (*(++s) != 0 && (*s == ',' || isspace(*s)));
4388 uschar *s = get_stdinput(NULL, NULL);
4389 if (s == NULL) break;
4390 test_address(s, flags, &exit_value);
4394 exim_exit(exit_value);
4397 /* Handle expansion checking. Either expand items on the command line, or read
4398 from stdin if there aren't any. If -Mset was specified, load the message so
4399 that its variables can be used, but restrict this facility to admin users.
4400 Otherwise, if -bem was used, read a message from stdin. */
4404 if (msg_action_arg > 0 && msg_action == MSG_LOAD)
4406 uschar spoolname[256]; /* Not big_buffer; used in spool_read_header() */
4409 fprintf(stderr, "exim: permission denied\n");
4412 message_id = argv[msg_action_arg];
4413 (void)string_format(spoolname, sizeof(spoolname), "%s-H", message_id);
4414 if (!spool_open_datafile(message_id))
4415 printf ("Failed to load message datafile %s\n", message_id);
4416 if (spool_read_header(spoolname, TRUE, FALSE) != spool_read_OK)
4417 printf ("Failed to load message %s\n", message_id);
4420 /* Read a test message from a file. We fudge it up to be on stdin, saving
4421 stdin itself for later reading of expansion strings. */
4423 else if (expansion_test_message != NULL)
4425 int save_stdin = dup(0);
4426 int fd = Uopen(expansion_test_message, O_RDONLY, 0);
4429 fprintf(stderr, "exim: failed to open %s: %s\n", expansion_test_message,
4431 return EXIT_FAILURE;
4434 filter_test = FTEST_USER; /* Fudge to make it look like filter test */
4435 message_ended = END_NOTENDED;
4436 read_message_body(receive_msg(extract_recipients));
4437 message_linecount += body_linecount;
4438 (void)dup2(save_stdin, 0);
4439 (void)close(save_stdin);
4440 clearerr(stdin); /* Required by Darwin */
4443 /* Allow $recipients for this testing */
4445 enable_dollar_recipients = TRUE;
4447 /* Expand command line items */
4449 if (recipients_arg < argc)
4451 while (recipients_arg < argc)
4453 uschar *s = argv[recipients_arg++];
4454 uschar *ss = expand_string(s);
4455 if (ss == NULL) printf ("Failed: %s\n", expand_string_message);
4456 else printf("%s\n", CS ss);
4464 char *(*fn_readline)(char *) = NULL;
4465 char *(*fn_addhist)(char *) = NULL;
4468 void *dlhandle = set_readline(&fn_readline, &fn_addhist);
4474 uschar *source = get_stdinput(fn_readline, fn_addhist);
4475 if (source == NULL) break;
4476 ss = expand_string(source);
4478 printf ("Failed: %s\n", expand_string_message);
4479 else printf("%s\n", CS ss);
4483 if (dlhandle != NULL) dlclose(dlhandle);
4487 /* The data file will be open after -Mset */
4489 if (deliver_datafile >= 0)
4491 (void)close(deliver_datafile);
4492 deliver_datafile = -1;
4495 exim_exit(EXIT_SUCCESS);
4499 /* The active host name is normally the primary host name, but it can be varied
4500 for hosts that want to play several parts at once. We need to ensure that it is
4501 set for host checking, and for receiving messages. */
4503 smtp_active_hostname = primary_hostname;
4504 if (raw_active_hostname != NULL)
4506 uschar *nah = expand_string(raw_active_hostname);
4509 if (!expand_string_forcedfail)
4510 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to expand \"%s\" "
4511 "(smtp_active_hostname): %s", raw_active_hostname,
4512 expand_string_message);
4514 else if (nah[0] != 0) smtp_active_hostname = nah;
4517 /* Handle host checking: this facility mocks up an incoming SMTP call from a
4518 given IP address so that the blocking and relay configuration can be tested.
4519 Unless a sender_ident was set by -oMt, we discard it (the default is the
4520 caller's login name). An RFC 1413 call is made only if we are running in the
4521 test harness and an incoming interface and both ports are specified, because
4522 there is no TCP/IP call to find the ident for. */
4529 if (!sender_ident_set)
4531 sender_ident = NULL;
4532 if (running_in_test_harness && sender_host_port != 0 &&
4533 interface_address != NULL && interface_port != 0)
4534 verify_get_ident(1413);
4537 /* In case the given address is a non-canonical IPv6 address, canonicize
4538 it. The code works for both IPv4 and IPv6, as it happens. */
4540 size = host_aton(sender_host_address, x);
4541 sender_host_address = store_get(48); /* large enough for full IPv6 */
4542 (void)host_nmtoa(size, x, -1, sender_host_address, ':');
4544 /* Now set up for testing */
4546 host_build_sender_fullhost();
4550 sender_local = FALSE;
4551 sender_host_notsocket = TRUE;
4552 debug_file = stderr;
4553 debug_fd = fileno(debug_file);
4554 fprintf(stdout, "\n**** SMTP testing session as if from host %s\n"
4555 "**** but without any ident (RFC 1413) callback.\n"
4556 "**** This is not for real!\n\n",
4557 sender_host_address);
4559 if (verify_check_host(&hosts_connection_nolog) == OK)
4560 log_write_selector &= ~L_smtp_connection;
4561 log_write(L_smtp_connection, LOG_MAIN, "%s", smtp_get_connection_info());
4563 /* NOTE: We do *not* call smtp_log_no_mail() if smtp_start_session() fails,
4564 because a log line has already been written for all its failure exists
4565 (usually "connection refused: <reason>") and writing another one is
4566 unnecessary clutter. */
4568 if (smtp_start_session())
4570 reset_point = store_get(0);
4573 store_reset(reset_point);
4574 if (smtp_setup_msg() <= 0) break;
4575 if (!receive_msg(FALSE)) break;
4579 exim_exit(EXIT_SUCCESS);
4583 /* Arrange for message reception if recipients or SMTP were specified;
4584 otherwise complain unless a version print (-bV) happened or this is a filter
4585 verification test. In the former case, show the configuration file name. */
4587 if (recipients_arg >= argc && !extract_recipients && !smtp_input)
4589 if (version_printed)
4591 printf("Configuration file is %s\n", config_main_filename);
4592 return EXIT_SUCCESS;
4595 if (filter_test == FTEST_NONE)
4596 exim_usage(called_as);
4600 /* If mua_wrapper is set, Exim is being used to turn an MUA that submits on the
4601 standard input into an MUA that submits to a smarthost over TCP/IP. We know
4602 that we are not called from inetd, because that is rejected above. The
4603 following configuration settings are forced here:
4605 (1) Synchronous delivery (-odi)
4606 (2) Errors to stderr (-oep == -oeq)
4607 (3) No parallel remote delivery
4608 (4) Unprivileged delivery
4610 We don't force overall queueing options because there are several of them;
4611 instead, queueing is avoided below when mua_wrapper is set. However, we do need
4612 to override any SMTP queueing. */
4616 synchronous_delivery = TRUE;
4617 arg_error_handling = ERRORS_STDERR;
4618 remote_max_parallel = 1;
4619 deliver_drop_privilege = TRUE;
4621 queue_smtp_domains = NULL;
4625 /* Prepare to accept one or more new messages on the standard input. When a
4626 message has been read, its id is returned in message_id[]. If doing immediate
4627 delivery, we fork a delivery process for each received message, except for the
4628 last one, where we can save a process switch.
4630 It is only in non-smtp mode that error_handling is allowed to be changed from
4631 its default of ERRORS_SENDER by argument. (Idle thought: are any of the
4632 sendmail error modes other than -oem ever actually used? Later: yes.) */
4634 if (!smtp_input) error_handling = arg_error_handling;
4636 /* If this is an inetd call, ensure that stderr is closed to prevent panic
4637 logging being sent down the socket and make an identd call to get the
4642 (void)fclose(stderr);
4643 exim_nullstd(); /* Re-open to /dev/null */
4644 verify_get_ident(IDENT_PORT);
4645 host_build_sender_fullhost();
4646 set_process_info("handling incoming connection from %s via inetd",
4650 /* If the sender host address has been set, build sender_fullhost if it hasn't
4651 already been done (which it will have been for inetd). This caters for the
4652 case when it is forced by -oMa. However, we must flag that it isn't a socket,
4653 so that the test for IP options is skipped for -bs input. */
4655 if (sender_host_address != NULL && sender_fullhost == NULL)
4657 host_build_sender_fullhost();
4658 set_process_info("handling incoming connection from %s via -oMa",
4660 sender_host_notsocket = TRUE;
4663 /* Otherwise, set the sender host as unknown except for inetd calls. This
4664 prevents host checking in the case of -bs not from inetd and also for -bS. */
4666 else if (!is_inetd) sender_host_unknown = TRUE;
4668 /* If stdout does not exist, then dup stdin to stdout. This can happen
4669 if exim is started from inetd. In this case fd 0 will be set to the socket,
4670 but fd 1 will not be set. This also happens for passed SMTP channels. */
4672 if (fstat(1, &statbuf) < 0) (void)dup2(0, 1);
4674 /* Set up the incoming protocol name and the state of the program. Root is
4675 allowed to force received protocol via the -oMr option above. If we have come
4676 via inetd, the process info has already been set up. We don't set
4677 received_protocol here for smtp input, as it varies according to
4678 batch/HELO/EHLO/AUTH/TLS. */
4682 if (!is_inetd) set_process_info("accepting a local %sSMTP message from <%s>",
4683 smtp_batched_input? "batched " : "",
4684 (sender_address!= NULL)? sender_address : originator_login);
4688 if (received_protocol == NULL)
4689 received_protocol = string_sprintf("local%s", called_as);
4690 set_process_info("accepting a local non-SMTP message from <%s>",
4694 /* Initialize the session_local_queue-only flag (this will be ignored if
4695 mua_wrapper is set) */
4698 session_local_queue_only = queue_only;
4700 /* For non-SMTP and for batched SMTP input, check that there is enough space on
4701 the spool if so configured. On failure, we must not attempt to send an error
4702 message! (For interactive SMTP, the check happens at MAIL FROM and an SMTP
4703 error code is given.) */
4705 if ((!smtp_input || smtp_batched_input) && !receive_check_fs(0))
4707 fprintf(stderr, "exim: insufficient disk space\n");
4708 return EXIT_FAILURE;
4711 /* If this is smtp input of any kind, real or batched, handle the start of the
4714 NOTE: We do *not* call smtp_log_no_mail() if smtp_start_session() fails,
4715 because a log line has already been written for all its failure exists
4716 (usually "connection refused: <reason>") and writing another one is
4717 unnecessary clutter. */
4723 if (verify_check_host(&hosts_connection_nolog) == OK)
4724 log_write_selector &= ~L_smtp_connection;
4725 log_write(L_smtp_connection, LOG_MAIN, "%s", smtp_get_connection_info());
4726 if (!smtp_start_session())
4729 exim_exit(EXIT_SUCCESS);
4733 /* Otherwise, set up the input size limit here. */
4737 thismessage_size_limit = expand_string_integer(message_size_limit, TRUE);
4738 if (expand_string_message != NULL)
4740 if (thismessage_size_limit == -1)
4741 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to expand "
4742 "message_size_limit: %s", expand_string_message);
4744 log_write(0, LOG_MAIN|LOG_PANIC_DIE, "invalid value for "
4745 "message_size_limit: %s", expand_string_message);
4749 /* Loop for several messages when reading SMTP input. If we fork any child
4750 processes, we don't want to wait for them unless synchronous delivery is
4751 requested, so set SIGCHLD to SIG_IGN in that case. This is not necessarily the
4752 same as SIG_DFL, despite the fact that documentation often lists the default as
4753 "ignore". This is a confusing area. This is what I know:
4755 At least on some systems (e.g. Solaris), just setting SIG_IGN causes child
4756 processes that complete simply to go away without ever becoming defunct. You
4757 can't then wait for them - but we don't want to wait for them in the
4758 non-synchronous delivery case. However, this behaviour of SIG_IGN doesn't
4759 happen for all OS (e.g. *BSD is different).
4761 But that's not the end of the story. Some (many? all?) systems have the
4762 SA_NOCLDWAIT option for sigaction(). This requests the behaviour that Solaris
4763 has by default, so it seems that the difference is merely one of default
4764 (compare restarting vs non-restarting signals).
4766 To cover all cases, Exim sets SIG_IGN with SA_NOCLDWAIT here if it can. If not,
4767 it just sets SIG_IGN. To be on the safe side it also calls waitpid() at the end
4768 of the loop below. Paranoia rules.
4770 February 2003: That's *still* not the end of the story. There are now versions
4771 of Linux (where SIG_IGN does work) that are picky. If, having set SIG_IGN, a
4772 process then calls waitpid(), a grumble is written to the system log, because
4773 this is logically inconsistent. In other words, it doesn't like the paranoia.
4774 As a consequenc of this, the waitpid() below is now excluded if we are sure
4775 that SIG_IGN works. */
4777 if (!synchronous_delivery)
4780 struct sigaction act;
4781 act.sa_handler = SIG_IGN;
4782 sigemptyset(&(act.sa_mask));
4783 act.sa_flags = SA_NOCLDWAIT;
4784 sigaction(SIGCHLD, &act, NULL);
4786 signal(SIGCHLD, SIG_IGN);
4790 /* Save the current store pool point, for resetting at the start of
4791 each message, and save the real sender address, if any. */
4793 reset_point = store_get(0);
4794 real_sender_address = sender_address;
4796 /* Loop to receive messages; receive_msg() returns TRUE if there are more
4797 messages to be read (SMTP input), or FALSE otherwise (not SMTP, or SMTP channel
4802 store_reset(reset_point);
4805 /* Handle the SMTP case; call smtp_setup_mst() to deal with the initial SMTP
4806 input and build the recipients list, before calling receive_msg() to read the
4807 message proper. Whatever sender address is given in the SMTP transaction is
4808 often ignored for local senders - we use the actual sender, which is normally
4809 either the underlying user running this process or a -f argument provided by
4810 a trusted caller. It is saved in real_sender_address. The test for whether to
4811 accept the SMTP sender is encapsulated in receive_check_set_sender(). */
4816 if ((rc = smtp_setup_msg()) > 0)
4818 if (real_sender_address != NULL &&
4819 !receive_check_set_sender(sender_address))
4821 sender_address = raw_sender = real_sender_address;
4822 sender_address_unrewritten = NULL;
4825 /* For batched SMTP, we have to run the acl_not_smtp_start ACL, since it
4826 isn't really SMTP, so no other ACL will run until the acl_not_smtp one at
4827 the very end. The result of the ACL is ignored (as for other non-SMTP
4828 messages). It is run for its potential side effects. */
4830 if (smtp_batched_input && acl_not_smtp_start != NULL)
4832 uschar *user_msg, *log_msg;
4833 enable_dollar_recipients = TRUE;
4834 (void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start,
4835 &user_msg, &log_msg);
4836 enable_dollar_recipients = FALSE;
4839 /* Now get the data for the message */
4841 more = receive_msg(extract_recipients);
4842 if (message_id[0] == 0)
4845 smtp_log_no_mail(); /* Log no mail if configured */
4846 exim_exit(EXIT_FAILURE);
4851 smtp_log_no_mail(); /* Log no mail if configured */
4852 exim_exit((rc == 0)? EXIT_SUCCESS : EXIT_FAILURE);
4856 /* In the non-SMTP case, we have all the information from the command
4857 line, but must process it in case it is in the more general RFC822
4858 format, and in any case, to detect syntax errors. Also, it appears that
4859 the use of comma-separated lists as single arguments is common, so we
4860 had better support them. */
4866 int count = argc - recipients_arg;
4867 uschar **list = argv + recipients_arg;
4869 /* These options cannot be changed dynamically for non-SMTP messages */
4871 active_local_sender_retain = local_sender_retain;
4872 active_local_from_check = local_from_check;
4874 /* Save before any rewriting */
4876 raw_sender = string_copy(sender_address);
4878 /* Loop for each argument */
4880 for (i = 0; i < count; i++)
4882 int start, end, domain;
4884 uschar *s = list[i];
4886 /* Loop for each comma-separated address */
4890 BOOL finished = FALSE;
4892 uschar *ss = parse_find_address_end(s, FALSE);
4894 if (*ss == ',') *ss = 0; else finished = TRUE;
4896 /* Check max recipients - if -t was used, these aren't recipients */
4898 if (recipients_max > 0 && ++rcount > recipients_max &&
4899 !extract_recipients)
4901 if (error_handling == ERRORS_STDERR)
4903 fprintf(stderr, "exim: too many recipients\n");
4904 exim_exit(EXIT_FAILURE);
4909 moan_to_sender(ERRMESS_TOOMANYRECIP, NULL, NULL, stdin, TRUE)?
4910 errors_sender_rc : EXIT_FAILURE;
4915 parse_extract_address(s, &errmess, &start, &end, &domain, FALSE);
4917 if (domain == 0 && !allow_unqualified_recipient)
4920 errmess = US"unqualified recipient address not allowed";
4923 if (recipient == NULL)
4925 if (error_handling == ERRORS_STDERR)
4927 fprintf(stderr, "exim: bad recipient address \"%s\": %s\n",
4928 string_printing(list[i]), errmess);
4929 exim_exit(EXIT_FAILURE);
4935 eblock.text1 = string_printing(list[i]);
4936 eblock.text2 = errmess;
4938 moan_to_sender(ERRMESS_BADARGADDRESS, &eblock, NULL, stdin, TRUE)?
4939 errors_sender_rc : EXIT_FAILURE;
4943 receive_add_recipient(recipient, -1);
4946 while (*(++s) != 0 && (*s == ',' || isspace(*s)));
4950 /* Show the recipients when debugging */
4955 if (sender_address != NULL) debug_printf("Sender: %s\n", sender_address);
4956 if (recipients_list != NULL)
4958 debug_printf("Recipients:\n");
4959 for (i = 0; i < recipients_count; i++)
4960 debug_printf(" %s\n", recipients_list[i].address);
4964 /* Run the acl_not_smtp_start ACL if required. The result of the ACL is
4965 ignored; rejecting here would just add complication, and it can just as
4966 well be done later. Allow $recipients to be visible in the ACL. */
4968 if (acl_not_smtp_start != NULL)
4970 uschar *user_msg, *log_msg;
4971 enable_dollar_recipients = TRUE;
4972 (void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start,
4973 &user_msg, &log_msg);
4974 enable_dollar_recipients = FALSE;
4977 /* Read the data for the message. If filter_test is not FTEST_NONE, this
4978 will just read the headers for the message, and not write anything onto the
4981 message_ended = END_NOTENDED;
4982 more = receive_msg(extract_recipients);
4984 /* more is always FALSE here (not SMTP message) when reading a message
4985 for real; when reading the headers of a message for filter testing,
4986 it is TRUE if the headers were terminated by '.' and FALSE otherwise. */
4988 if (message_id[0] == 0) exim_exit(EXIT_FAILURE);
4989 } /* Non-SMTP message reception */
4991 /* If this is a filter testing run, there are headers in store, but
4992 no message on the spool. Run the filtering code in testing mode, setting
4993 the domain to the qualify domain and the local part to the current user,
4994 unless they have been set by options. The prefix and suffix are left unset
4995 unless specified. The the return path is set to to the sender unless it has
4996 already been set from a return-path header in the message. */
4998 if (filter_test != FTEST_NONE)
5000 deliver_domain = (ftest_domain != NULL)?
5001 ftest_domain : qualify_domain_recipient;
5002 deliver_domain_orig = deliver_domain;
5003 deliver_localpart = (ftest_localpart != NULL)?
5004 ftest_localpart : originator_login;
5005 deliver_localpart_orig = deliver_localpart;
5006 deliver_localpart_prefix = ftest_prefix;
5007 deliver_localpart_suffix = ftest_suffix;
5008 deliver_home = originator_home;
5010 if (return_path == NULL)
5012 printf("Return-path copied from sender\n");
5013 return_path = string_copy(sender_address);
5017 printf("Return-path = %s\n", (return_path[0] == 0)? US"<>" : return_path);
5019 printf("Sender = %s\n", (sender_address[0] == 0)? US"<>" : sender_address);
5021 receive_add_recipient(
5022 string_sprintf("%s%s%s@%s",
5023 (ftest_prefix == NULL)? US"" : ftest_prefix,
5025 (ftest_suffix == NULL)? US"" : ftest_suffix,
5026 deliver_domain), -1);
5028 printf("Recipient = %s\n", recipients_list[0].address);
5029 if (ftest_prefix != NULL) printf("Prefix = %s\n", ftest_prefix);
5030 if (ftest_suffix != NULL) printf("Suffix = %s\n", ftest_suffix);
5032 (void)chdir("/"); /* Get away from wherever the user is running this from */
5034 /* Now we run either a system filter test, or a user filter test, or both.
5035 In the latter case, headers added by the system filter will persist and be
5036 available to the user filter. We need to copy the filter variables
5039 if ((filter_test & FTEST_SYSTEM) != 0)
5041 if (!filter_runtest(filter_sfd, filter_test_sfile, TRUE, more))
5042 exim_exit(EXIT_FAILURE);
5045 memcpy(filter_sn, filter_n, sizeof(filter_sn));
5047 if ((filter_test & FTEST_USER) != 0)
5049 if (!filter_runtest(filter_ufd, filter_test_ufile, FALSE, more))
5050 exim_exit(EXIT_FAILURE);
5053 exim_exit(EXIT_SUCCESS);
5056 /* Else act on the result of message reception. We should not get here unless
5057 message_id[0] is non-zero. If queue_only is set, session_local_queue_only
5058 will be TRUE. If it is not, check on the number of messages received in this
5061 if (!session_local_queue_only &&
5062 smtp_accept_queue_per_connection > 0 &&
5063 receive_messagecount > smtp_accept_queue_per_connection)
5065 session_local_queue_only = TRUE;
5066 queue_only_reason = 2;
5069 /* Initialize local_queue_only from session_local_queue_only. If it is false,
5070 and queue_only_load is set, check that the load average is below it. If it is
5071 not, set local_queue_only TRUE. If queue_only_load_latch is true (the
5072 default), we put the whole session into queue_only mode. It then remains this
5073 way for any subsequent messages on the same SMTP connection. This is a
5074 deliberate choice; even though the load average may fall, it doesn't seem
5075 right to deliver later messages on the same call when not delivering earlier
5076 ones. However, there are odd cases where this is not wanted, so this can be
5077 changed by setting queue_only_load_latch false. */
5079 local_queue_only = session_local_queue_only;
5080 if (!local_queue_only && queue_only_load >= 0)
5082 local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load;
5083 if (local_queue_only)
5085 queue_only_reason = 3;
5086 if (queue_only_load_latch) session_local_queue_only = TRUE;
5090 /* If running as an MUA wrapper, all queueing options and freezing options
5094 local_queue_only = queue_only_policy = deliver_freeze = FALSE;
5096 /* Log the queueing here, when it will get a message id attached, but
5097 not if queue_only is set (case 0). Case 1 doesn't happen here (too many
5100 if (local_queue_only) switch(queue_only_reason)
5103 log_write(L_delay_delivery,
5104 LOG_MAIN, "no immediate delivery: more than %d messages "
5105 "received in one connection", smtp_accept_queue_per_connection);
5109 log_write(L_delay_delivery,
5110 LOG_MAIN, "no immediate delivery: load average %.2f",
5111 (double)load_average/1000.0);
5115 /* Else do the delivery unless the ACL or local_scan() called for queue only
5116 or froze the message. Always deliver in a separate process. A fork failure is
5117 not a disaster, as the delivery will eventually happen on a subsequent queue
5118 run. The search cache must be tidied before the fork, as the parent will
5119 do it before exiting. The child will trigger a lookup failure and
5120 thereby defer the delivery if it tries to use (for example) a cached ldap
5121 connection that the parent has called unbind on. */
5123 else if (!queue_only_policy && !deliver_freeze)
5128 if ((pid = fork()) == 0)
5131 close_unwanted(); /* Close unwanted file descriptors and TLS */
5132 exim_nullstd(); /* Ensure std{in,out,err} exist */
5134 /* Re-exec Exim if we need to regain privilege (note: in mua_wrapper
5135 mode, deliver_drop_privilege is forced TRUE). */
5137 if (geteuid() != root_uid && !deliver_drop_privilege && !unprivileged)
5139 (void)child_exec_exim(CEE_EXEC_EXIT, FALSE, NULL, FALSE, 2, US"-Mc",
5141 /* Control does not return here. */
5144 /* No need to re-exec */
5146 rc = deliver_message(message_id, FALSE, FALSE);
5148 _exit((!mua_wrapper || rc == DELIVER_MUA_SUCCEEDED)?
5149 EXIT_SUCCESS : EXIT_FAILURE);
5154 log_write(0, LOG_MAIN|LOG_PANIC, "failed to fork automatic delivery "
5155 "process: %s", strerror(errno));
5158 /* In the parent, wait if synchronous delivery is required. This will
5159 always be the case in MUA wrapper mode. */
5161 else if (synchronous_delivery)
5164 while (wait(&status) != pid);
5165 if ((status & 0x00ff) != 0)
5166 log_write(0, LOG_MAIN|LOG_PANIC,
5167 "process %d crashed with signal %d while delivering %s",
5168 (int)pid, status & 0x00ff, message_id);
5169 if (mua_wrapper && (status & 0xffff) != 0) exim_exit(EXIT_FAILURE);
5173 /* The loop will repeat if more is TRUE. If we do not know know that the OS
5174 automatically reaps children (see comments above the loop), clear away any
5175 finished subprocesses here, in case there are lots of messages coming in
5176 from the same source. */
5178 #ifndef SIG_IGN_WORKS
5179 while (waitpid(-1, NULL, WNOHANG) > 0);
5183 exim_exit(EXIT_SUCCESS); /* Never returns */
5184 return 0; /* To stop compiler warning */