######################################################################## # # # --------------------------- # # InspIRCd Configuration File # # --------------------------- # # # ##################################||#################################### #||# ##################################||#################################### # # # This is an example of the config file for InspIRCd. # # Change the options to suit your network # # # # Last updated on : 06/06/2005 # # Written by : CC (cc@backchat.co.za) # # Updated by : katsklaw (katsklaw@gmail.com) # ######################################################################## #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#- # # # Here is where you enter the information about your server. # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Describes the Server Administrator's real name, nick # # and email address. # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # Enter the port and address bindings here. # # # # bind address - specifies which the address which ports bind # # port - opens an unused port # # type - can be 'clients' or 'servers'. The clients type is # # a standard tcp based socket, the servers type is a # # also a TCP based connection but of a different # # format. # # default - if the port type is 'servers' then this can be # # specified. If set to 'yes', it indicates that this # # port is the default route for all /connect commands.# # if you do not bind your default route to an # # external ip, or all ip's, you may have connection # # problems. # # # # Leaving address empty binds to all available interfaces # # # # Syntax is as follows: # # # # # # # # # # # #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- # # # You can configure the passwords here which you wish to use for # # the die and restart commands. Only trusted ircops who will # # need this ability should know the die and restart password. # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This optional tag allows you to include another config file # # allowing you to keep your configuration tidy. The configuration # # file you include will be treated as part of the configuration file # # which includes it, in simple terms the inclusion is transparent. # # # # All paths to config files are relative to the directory of the main # # config file inspircd.conf, unless the filename starts with a forward# # slash (/) in which case it is treated as an absolute path. # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#- # # # This is where you can configure which connections are allowed # # and denied access onto your server. # # The password is optional. # # You may have as many of these as you require. # # To allow/deny all connections use a * # # # # Syntax is as follows: # # # # # # # # # # # # # # # # # # You may optionally include timeout="x" on any allow line, which # # specifies the amount of time given before an unknown connection # # is closed if USER/NICK/PASS are not given. This value is in secs # # # # You may also optionally include a flood="x" line which indicates # # the number of lines a user may place into their buffer at once # # before they are disconnected for excess flood. The default is to # # DISABLE this feature. A recommended value is 10. A counter is # # maintained for each user which is reset every 'threshold' seconds # # and specifying this threshold value with threshold="X" indicates # # how often the counter is reset. For example, with flood="5" and # # threshold="8", the user may not send more than 5 lines in 8 secs. # # # # You may optionally specify the sendq size and ping frequency of # # each connect:allow line using the pingfreq="X" and sendq="X" # # settings as shown in the full example below. # # The ping frequency is specified in seconds, and the sendq size # # in bytes. It is recommended, although not enforced, that you # # should never set your sendq size to less than 8k. Send Queues are # # dynamically allocated and can grow as needed up to the maximum # # size specified. # # # # The optional recvq value is the maximum size which users in this # # group may grow their receive queue to. This is recommended to be # # kept pretty low compared to the sendq, as users will always # # recieve more than they send in normal circumstances. The default # # if not specified is 4096. # # # # IMPORTANT NOTE, CALL THE CONFUSION POLICE! # # The sendq is the data waiting to be sent TO THE USER. # # The recvq is the data being received FROM THE USER. # # The names sendq and recvq are from the SERVER'S PERSPECTIVE not # # that of the user... Just to clear up any confusion or complaints # # that these are backwards :p # # # #-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # Classes are a group of commands which are grouped together # # and given a unique name. They used to define which commands # # are available to certain types of Operators. # # # # Syntax is as follow: # # # # # #-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you specify which types of operators you have on # # your server, as well as the commands they are allowed to use. # # This works alongside with the classes specified above. # # # # type name - a name for the combined class types # # classes - specified above, used for flexibility for the # # server admin to decide on which operators get # # what commands # # host - hostmask operators will recieve on oper-up. # #(optional) # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Opers are defined here. This is a very important section. # # Remember to only make operators out of truthworthy people. # # # # name - oper name, best to use lower-case # # password - password to oper-up, # # encryption not supported by inspircd. However, there # # are modules that allow for oper password encryption. # # # # host - host of client allowed to oper-up, more hostmasks # # seperated by spaces, wildcards accepted # # type - specified above, defines the kind of operator # # # # Syntax is as follows: # # # # # #-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # Defines which servers can link to this one, and which servers this # # server may create outbound links to. # # # # name - The name is the canocial name of the server, it does# # not have to resolve - but it is expected to be sent # # in the remote servers connection info. # # # # ipaddr - Valid host or ip address for remote server. * # # # # port - Valid listening UDP port for remote server. # # # # sendpass - Password to send to create an outbound connection # # to this server. # # # # recvpass - Password to receive to accept an inbound connection # # from this server. # # # # autoconnect - Sets the server to autoconnect. x is the number # # (optional) of seconds between attempts. 300 = 5 minutes # # # # encryptionkey - The encryption key to use to encrypt this link. # # (optional) Applicable when using m_spanningtree.so, the key # # must be EXACTLY 16, 24 or 32 characters long and # # must match on both ends of the link. Each link may # # have its own key so long as both ends of the link # # use the same key string. # # # # to u:line a server (give it extra privilages required for running # # services, Q, etc) you must include the tag as shown # # in the example below. You can have as many of these as you like. # # # # WARNING: Unlike other ircds, u:lining a server allows ALL users on # # that server to operoverride modes. This should only be used for # # services and protected oper servers! # # # # IMPORTANT NOTE: When specifying the ip address and/or host, the # # server software will prioritize RESOLVED hostnames above ip # # addresses, so for example if your target server resolves to a.b.com # # you MUST put a.b.com into your link block, and NOT the IP address # # of a.b.com. The system uses reverse resolution. # # # #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # These options let you define the path to your motd and rules # # files. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define your DNS server address here. InspIRCd has its own resolver # # and you must define this otherwise nobody's host will resolve. The # # timeout value is in seconds. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define the path to the PID file here. The PID file can be used to # # rehash the ircd from the shell or to terminate the ircd from the # # shell using shell scripts, perl scripts etc, and to monitor the # # ircd's state via cron jobs. # # # #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Use these tags to customise the ban limits on a per channel basis. # # the tags are read from top to bottom, and any tag found which # # matches the channels name applies the banlimit to that channel. # # It is advisable to put an entry with the channel as '*' at the # # bottom of the list. If none are specified or no maxbans tag is # # matched, the banlist size defaults to 64 entries. # # # #-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag is optional, and specifies one or more commands which are # # not available to non-operators. For example you may wish to disable # # NICK and prevent non-opers from changing their nicknames. # # Note that any disabled commands take effect only after the user has # # 'registered' (e.g. after the initial USER/NICK/PASS on connection) # # so for example disabling NICK will not cripple your network. # # # # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Just remove this... Its here to make you read ALL of the config # # file options ;) # #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # Settings to define which features are useable on your server. # # # # prefixquit - a prefix for a client's quit message # # loglevel - specifies what detail of messages to log in the # # log file. You may select from debug, verbose, # # default, sparse and none. # # allowhalfop - allows the +h channel mode # # noservices - If noservices is true, yes, or 1, then the first # # user into a channel gets founder status. This is # # only useful on networks running the m_chanprotect # # module without services. # # netbuffersize - size of the buffer used to receive data from # # clients. The ircd may only read() this amount # # of text in one go at any time. (OPTIONAL) # # maxwho - The maximum number of results returned by a /WHO # # query. This is to prevent /WHO being used as a # # spam vector or means of flooding an ircd. The # # default is 128, it is not recommended to raise it # # above 1024. Values up to 65535 are permitted. # # somaxconn - The maximum number of sockets that may be waiting # # in the accept queue. This usually allows the ircd # # to soak up more connections in a shorter space of # # time when increased but please be aware there is a # # system defined maximum value to this, the same way # # there is a system defined maximum number of file # # descriptors. Some systems may only allow this to # # be up to 5 (ugh) while others such as FreeBSD will # # default to a much nicer 128. # # moduledir - This optional value indicates a runtime change of # # the location where modules are to be found. This # # does not add a supplementary directory. There can # # only be one module path. # # softlimit - This optional feature allows a defined softlimit. # # if defined sets a soft maxconnections value, has # # to be less than the ./configure maxclients # # # #-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # These tags define which modules will be loaded on startup by your # # server. Add modules without any paths. When you make your ircd # # using the 'make' command, all compiled modules will be moved into # # the folder you specified when you ran ./configure. The module tag # # automatically looks for modules in this location. # # If you attempt to load a module outside of this location, either # # in the config, or via /LOADMODULE, you will receive an error. # # # # By default, ALL modules are commented out. You must uncomment them # # or add lines to your config to load modules. Please refer to # # http://www.inspircd.org/wiki/Modules_List for a list of modules and# # each modules link for any additional conf tags they require. # # # # WINDOWS USERS PLEASE NOTE: You can still load these modules! They # # are incorporated into the executable and can be loaded and removed # # similarly to if they were in a ramdisk. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Foobar module - does nothing # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Chanprotect module: gives +q and +a channel modes # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Globops module: gives /GLOBOPS and usermode +g # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Noinvite module: Gives channel mode +V # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper MD5 module: Allows MD5 hashed oper passwords # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restricted channels module: Allows only opers to create channels # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deny Channels: Deny Channels from being used by users # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Services support module: Adds several usermodes such as +R and +M # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Userip module: Adds the /USERIP command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alias module: Allows you to define server-side command aliases # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGHOST module: Adds the /CHGHOST command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HELPOP module: Provides the /HELPOP command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No kicks module: Adds the +Q channel mode # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper MOTD module: Provides support for seperate message of the day # on oper-up # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restrict message module: Allows users to only message opers # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Sethost module: Adds the /SETHOST command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Antibottler module: Labels bottler leech bots # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Watch module: Adds the WATCH command, which is used by clients to # maintain notify lists. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Cloaking module: Adds usermode +x and cloaking support # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hostchange module: Allows a different style of cloaking # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No nicks module: Adds the +N channel mode # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Override module: Adds support for oper override # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAJOIN module: Adds the /SAJOIN command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Set Idle module: Adds a command for opers to change their # idle time (mainly a toy) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block colour module: Adds the +c channel mode # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Lusers: Shows the LUSERS output on connect # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ident: Provides RFC 1413 ident lookup support # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No Notice module: adds the channel mode +T # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Parking module: Adds parking support and /PARK and /UNPARK # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAMODE module: Adds the oper /SAMODE command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SETNAME module: Adds the /SETNAME command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Botmode module: Adds the user mode +B # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Filter module: Provides glob-based message filtering # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Knock module: adds the /KNOCK command and +K channel mode # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper channels mode: Adds the +O channel mode # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Random Quote module: provides a random quote on connect # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SANICK module: Allows opers to change user's nicks # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Show Whois module: Adds the +W usermode which allows opers # to see when they are whois'ed # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Strip colour module: Adds the channel mode +S # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Censor module: Adds the channel mode +G # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nick locking module: Adds the oper-only /NICKLOCK command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper Join module: Forces opers to join a channel on oper-up # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Redirect module: Adds channel redirection (mode +L) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAPART module: Adds the oper /SAPART command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SILENCE module: Adds support for /SILENCE # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Test command module: Does nothing significant # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel filter module: Allows channel-op defined message # filtering using simple string matches (channel mode +g) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No ctcp module: Adds the channel mode +C to block CTCPs # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper levels module: Gives each oper a level and prevents # actions being taken against higher level opers # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Remove module: Adds the /REMOVE command which is a peaceful # alternative to /KICK # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Timed bans module: Adds timed bans and the /TBAN command # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper modes module: Allows you to specify modes to add/remove on oper # #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_filter.so module, then # # specfiy below the path to the filter.conf file. # # #-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_helpop.so module, then # # specify below the path to the helpop.conf file. # # #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_randquotes.so module, then # # specify below the path to the randquotes.conf file. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # The ban tags define nick masks, host masks and ip ranges which are # # banned from your server. All details in these tags are local to # # Your server. # # # # # # badip lines ban an ip range (same as a zline) # # # # ipmask - The ip range to ban (wildcards possible) # # reason - Reason to display when disconnected # # # # badnick lines ban a nick mask (same as a qline) # # # # nick - Nick mask to ban (wildcards possible) # # reason - Reason to display on /NICK # # # # badhost lines ban a user@host mask (same as a kline) # # # # host - ident@hostname (wildcards possible) # # reason - Reason to display on disconnection # # # # exception lines define a hostmask that is excempt from [kzg]lines # # # # host - ident@hostname (wildcards possible) # # reason - Reason, shown only in /stats e # # # #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_alias.so module loaded, you may also define # # aliases as shown below. They are commonly used to provide shortcut # # commands to services, however they are not limited to jsut this use.# # An alias tag requires the following values to be defined in it: # # # # text - The text to detect at the start of the line, # # must be at the start of the line to trigger the # # alias. May contain spaces, but case insensitive. # # replace - The text to replace 'text' with. Usually this # # will be "PRIVMSG ServiceName :" or similar. # # requires - If you provide a value for 'requires' this means # # the given nickname MUST be online for the alias # # to successfully trigger. If they are not, then # # the user receives a 'no such nick' 401 numeric. # # uline - Defining this value with 'yes', 'true' or '1' # # will ensure that the user given in 'requires' # # must also be on a u-lined server, as well as # # actually being on the network. If the user is # # online, but not on a u-lined server, then an # # oper-alert is sent out as this is possibly signs # # of a user trying to impersonate a service. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # You should already know what to do here :) # ######################################################################### # # # -InspIRCd Development and Coding Team- # # www.inspircd.org # # # #########################################################################