-<coper line1="Oper Commands"
- line2="-------------"
- line3="DIE RESTART KILL REHASH TRACE"
- line4="CONNECT SQUIT MODULES MKPASSWD SHUN"
- line5="KLINE QLINE GLINE ELINE ZLINE"
- line6="SAJOIN SAPART SAMODE SAQUIT SANICK"
- line7="SETIDLE SETHOST SETNAME SETIDENT SWHOIS"
- line8="OPERMOTD CHGHOST CHGNAME CHGIDENT CBAN"
- line9="NICKLOCK NICKUNLOCK LOADMODULE UNLOADMODULE GLOBOPS"
- line10="SPYLIST SPYNAMES GLOADMODULE GUNLOADMODULE MKSHA256"
- line11="PARKSTATS FREEZE UNFREEZE OPERPERMS RCONNECT">
-
-<rconnect line1="/RCONNECT [source mask] [target mask]"
- line2="All servers matching [source mask] will try to connect to"
- line3="the first server in the config file matching [target mask].">
-
-<operperms line1="/OPERPERMS [nick]"
- line2="List all commands an oper has access to use.">
-
-<freeze line1="/FREEZE [nick]"
- line2="Prevents the user from sending commands until they reconnect."
- line3="User is also notified they have been frozen.">
-
-<unfreeze line1="/UNFREEZE [nick]"
- line2="Unfreezes a user frozen by the /FREEZE command.">
-
-<parkstats line1="/PARKSTATS"
- line2="Displays the park module's statistics">
-
-<spylist line1="/SPYLIST"
- line2="Operates the same as /LIST but includes +s and +p channels.">
-
-<spynames line1="/SPYNAMES [channel]"
- line2="Operates the same as /name but works on +s and +p channels.">
-
-<globops line1="/GLOBOPS [message]"
- line2="Sends a message to all +g users.">
-
-<cban line1="/CBAN [channel] {[duration] :[reason]}"
- line2="Sets or removes a channel ban. You must specify at least"
- line3="3 parameters to add a ban, and one parameter to remove a ban."
- line4="The duration may be specified in seconds, or in the following format"
- line5="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,"
- line6="5 minutes and 6 seconds. All fields in this format are optional.">
-
-<sajoin line1="/SAJOIN [nick] [channel]"
- line2="Forces the user to join the channel.">
-
-<sapart line1="/SAPART [nick] [channel]"
- line2="Forces the user to part the channel.">
-
-<samode line1="/SAMODE [#chan/nick] +/-[modes] {[parameters for modes]}"
- line2="Gives the channel or nick the modes specified.">
-
-<sanick line1="/SANICK [nick] [new nick]"
- line2="Changes the users nick to the new nick.">
-
-<saquit line1="/SAQUIT [nick] [reason]"
- line2="Forces user to quit with the specified reason.">
-
-<setidle line1="/SETIDLE [idle time]"
- line2="Sets your idle time (in seconds).">
-
-<sethost line1="/SETHOST [host]"
- line2="Sets your host to the specified host.">
-
-<setident line1="/SETIDENT [ident]"
- line2="Sets your ident to the specified ident.">
-
-<setname line1="/SETNAME [name]"
- line2="Sets your name to the specified name.">
-
-<swhois line="/SWHOIS [nick] [swhois]"
- line2="Sets the users swhois field to the given swhois.">
-
-<mkpasswd line1="/MKPASSWD [plaintext]"
- line2="Encodes the plaintext to an MD5 hash and displays the result.">
-
-<mksha256 line1="/MKSHA256 [plaintext]"
- line2="Encodes the plaintext to an SHA-256 hash and displays the result.">
-
-<opermotd line1="/OPERMOTD"
- line2="Re-displays the Oper MOTD.">
-
-<nicklock line1="/NICKLOCK [nick] [new nick]"
- line2="Changes user's nick to the new nick, and forces"
- line3="it to remain as such for the remainder of the session.">
-
-<nickunlock line1="/NICKUNLOCK [nick]"
- line2="Allows the user to change nicks.">
-
-<chghost line1="/CHGHOST [nickname] [new hostname]"
- line2="Changes the hostname of the user to the new hostname>.">
-
-<chgname line1="/CHGNAME [nickname] [new name]"
- line2="Changes the name of the user to the new name>.">
-
-<chgident line1="/CHGIDENT [nickname] [new ident]"
- line2="Changes the ident of the user to the new ident.">
-
-<shun line1="/SHUN [user@host] {[duration] :[reason]}"
- line2="Sets or removes a shun (serverside ignore) on a host and ident mask."
- line3="You must specify at least 3 parameters to add a shun, and one"
- line4="parameter to remove a shun (just the user@host section)."
- line5="The duration may be specified in seconds, or in the following format"
- line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,"
- line7="5 minutes and 6 seconds. All fields in this format are optional.">
-
-<die line1="/DIE [password]"
- line2="If the correct password is provided, and you are an operator,"
- line3="This command will shut down the local server.">
-
-<restart line1="/RESTART [password]"
- line2="If the correct password is provided, and you are an operator,"
- line3="This command will restart the local server.">
-
-<commands line1="/COMMANDS"
- line2="Shows all currently available commands.">
-
-<kill line1="/KILL [user] [reason]"
- line2="This command will disconnect a user from IRC with the given reason.">
-
-<rehash line1="/REHASH"
- line2="This command will cause the server configuration file to be"
- line3="re-read and values re-initialised.">
-
-<trace line1="/TRACE [nick|user@host|servermask]"
- line2="This command will provide a list of all users and servers which"
- line3="must be passed through or over to reach a given object (server or user).">
-
-<connect line1="/CONNECT [servermask]"
- line2="Create a mesh connection to the given servermask. You must have"
- line3="configured the server for linking in your configuration file,"
- line4="and provided a password.">
-
-<squit line1="/SQUIT"
- line2="Disconnects the local server from the mesh network, causing every"
- line3="other server in the mesh to drop it.">
-
-<modules line1="/MODULES"
- line2="Lists currently loaded modules, their memory offsets and version"
- line3="numbers and flags. If you are not an operator, you will see reduced"
- line4="detail.">
-
-<loadmodule line1="/LOADMODULE [filename.so]"
- line2="Loads a module into the IRCd.">
-
-<unloadmodule line1="/UNLOADMODULE [filename.so]"
- line3="Unloads a module from the IRCd. The module cannot have the static"
- line4="flag set (see the output of /MODULES).">
-
-<gloadmodule line1="/GLOADMODULE [filename.so]"
- line2="Globally loads a module into the network.">
-
-<gunloadmodule line1="/GUNLOADMODULE [filename.so]"
- line3="Globally unloads a module from the network. The module cannot "
- line4="have the static flag set (see the output of /MODULES).">
-
-<kline line1="/KLINE [user@host] {[duration] :[reason]}"
- line2="Sets or removes a k-line (host based ban) on a host and ident mask."
- line3="You must specify at least 3 parameters to add a ban, and one"
- line4="parameter to remove a ban (just the user@host section)."
- line5="The duration may be specified in seconds, or in the following format"
- line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,"
- line7="5 minutes and 6 seconds. All fields in this format are optional.">
-
-<zline line1="/ZLINE [ipmask] {[duration] :[reason]}"
- line2="Sets or removes a z-line (ip based ban) on an ip range mask."
- line3="You must specify at least 3 parameters to add a ban, and one"
- line4="parameter to remove a ban (just the user@host section)."
- line5="The duration may be specified in seconds, or in the following format"
- line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,"
- line7="5 minutes and 6 seconds. All fields in this format are optional.">
-
-<qline line1="/QLINE [nickmask] {[duration] :[reason]}"
- line2="Sets or removes a q-line (nick based ban) on a nick mask."
- line3="You must specify at least 3 parameters to add a ban, and one"
- line4="parameter to remove a ban (just the user@host section)."
- line5="The duration may be specified in seconds, or in the following format"
- line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,"
- line7="5 minutes and 6 seconds. All fields in this format are optional.">
-
-<gline line1="/GLINE [user@host] {[duration] :[reason]}"
- line2="Sets or removes a g-line (global host based ban) on host mask."
- line3="You must specify at least 3 parameters to add a ban, and one"
- line4="parameter to remove a ban (just the user@host section)."
- line5="The duration may be specified in seconds, or in the following format"
- line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,"
- line7="5 minutes and 6 seconds. All fields in this format are optional.">
-
-<eline line1="/ELINE [user@host] {[duration] :[reason]}"
- line2="Sets or removes a e-line (local ban exception) on host mask."
- line3="You must specify at least 3 parameters to add an exception, and one"
- line4="parameter to remove an exception (just the user@host section)."
- line5="The duration may be specified in seconds, or in the following format"
- line6="1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,"
- line7="5 minutes and 6 seconds. All fields in this format are optional.">
+<helpop key="coper" value="Oper Commands
+-------------
+DIE RESTART KILL REHASH TRACE
+CONNECT SQUIT MODULES MKPASSWD SHUN
+KLINE QLINE GLINE ELINE ZLINE
+SAJOIN SAPART SAMODE SAQUIT SANICK
+SETIDLE SETHOST SETNAME SETIDENT SWHOIS
+OPERMOTD CHGHOST CHGNAME CHGIDENT CBAN
+NICKLOCK NICKUNLOCK LOADMODULE UNLOADMODULE RELOADMODULE
+SPYLIST SPYNAMES GLOADMODULE GUNLOADMODULE GRELOADMODULE
+FREEZE UNFREEZE OPERPERMS RCONNECT RSQUIT
+CHECK CLONES FILTER GLOBOPS USERIP
+JUMPSERVER LOCKSERV UNLOCKSERV ALLTIME TAXONOMY
+TLINE">
+
+<helpop key="userip" value="/USERIP [nickname]
+Returns the ip and nickname of a user.">
+
+<helpop key="tline" value="/TLINE [host or ip mask]
+This command returns the number of local and global clients matched,
+and the percentage of clients matched, plus how they were matched
+(by IP address or by hostname).">
+
+<helpop key="taxonomy" value="/TAXONOMY [nick]
+Lists all metadata attached to the user.">
+
+<helpop key="lockserv" value="/LOCKSERV
+Locks out all new connections notifying connecting users that the
+service is temporarily closed and to try again later.">
+
+<helpop key="unlockserv" value="/UNLOCKSERV
+Opens the server up again for new connections.">
+
+<helpop key="jumpserver" value="/JUMPSERVER {[newserver] [newport] [+/-flags] {:[reason]}}
+Sets or cancels jumpserver mode. If no parameters are given,
+jumpserver mode is cancelled, if it is currently set. If parameters
+are given, a server address must be given for [newserver] and a
+server port must be given for [newport]. Zero or more status flags
+should be given for 'flags', from the list below (if you do not
+wish to specify any flags just place a '+' in this field):
+1. +a: Redirect all users immediately (except for opers) and cause
+them to quit with the given reason
+2. +n: Redirect any new users who connect and cause them to quit
+during registration
+You may use + and - to set or unset these flags in the command, the
+default flags are -a+n, which will just redirect new users. The
+reason parameter is optional, and if not provided defaults to
+'Please use this server/port instead' (the default given in various
+numeric lists)">
+
+<helpop key="filter" value="/FILTER [filter-definition] {[action] [flags] {[gline-duration]} :[reason]}
+This command will add a filter when more than one parameter is
+given, using the specified filter definition, action, gline
+duration (when the type is 'gline') and reason. When only one
+parameter is provided (the filter pattern) the provided filter will
+be removed. Note that if you remove a configuration-defined filter,
+it will re-appear at next rehash unless it is also removed from the
+config file.">
+
+<helpop key="clones" value="/CLONES [limit]
+Retrieves a list of users with more clones than the specified
+limit.">
+
+<helpop key="check" value="/CHECK [nick|ip|hostmask|channel]
+Allows opers to look up advanced information on channels, hostmasks
+or IP addresses, in a similar way to WHO but in more detail.">
+
+<helpop key="alltime" value="/ALLTIME
+Shows the time (with any delta, if applied) on all servers on
+the network.">
+
+<helpop key="rconnect" value="/RCONNECT [source mask] [target mask]
+All servers matching [source mask] will try to connect to
+the first server in the config file matching [target mask].">
+
+<helpop key="rsquit" value="/RSQUIT {[source mask]} [target mask]
+Causes the remote server [target mask] to be disconnected from
+the network, by [source mask] if specified.">
+
+<helpop key="operperms" value="/OPERPERMS [nick]
+List all commands an oper has access to use.">
+
+<helpop key="freeze" value="/FREEZE [nick]
+Prevents the user from sending commands until they reconnect.
+User is also notified they have been frozen.">
+
+<helpop key="unfreeze" value="/UNFREEZE [nick]
+Unfreezes a user frozen by the /FREEZE command.">
+
+<helpop key="globops" value="/GLOBOPS [message]
+Sends a message to all users with the +g snomask.">
+
+<helpop key="cban" value="/CBAN [channel] {[duration] :[reason]}
+Sets or removes a channel ban. You must specify at least
+3 parameters to add a ban, and one parameter to remove a ban.
+The duration may be specified in seconds, or in the following format
+1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
+5 minutes and 6 seconds. All fields in this format are optional.">
+
+<helpop key="sajoin" value="/SAJOIN [nick] [channel]
+Forces the user to join the channel.">
+
+<helpop key="sapart" value="/SAPART [nick] [channel]
+Forces the user to part the channel.">
+
+<helpop key="samode" value="/SAMODE [#chan] +/-[modes] {[parameters for modes]}
+Gives the channel or nick the modes specified.">
+
+<helpop key="sanick" value="/SANICK [nick] [new nick]
+Changes the users nick to the new nick.">
+
+<helpop key="saquit" value="/SAQUIT [nick] [reason]
+Forces user to quit with the specified reason.">
+
+<helpop key="setidle" value="/SETIDLE [idle time]
+Sets your idle time (in seconds).">
+
+<helpop key="sethost" value="/SETHOST [host]
+Sets your host to the specified host.">
+
+<helpop key="setident" value="/SETIDENT [ident]
+Sets your ident to the specified ident.">
+
+<helpop key="setname" value="/SETNAME [name]
+Sets your name to the specified name.">
+
+<helpop key="swhois" line="/SWHOIS [nick] [swhois]
+Sets the users swhois field to the given swhois.">
+
+<helpop key="mkpasswd" value="/MKPASSWD [hashtype] [plaintext]
+Encodes the plaintext to a hash of the given type and displays
+the result.">
+
+<helpop key="opermotd" value="/OPERMOTD
+Re-displays the Oper MOTD.">
+
+<helpop key="nicklock" value="/NICKLOCK [nick] [new nick]
+Changes user's nick to the new nick, and forces
+it to remain as such for the remainder of the session.">
+
+<helpop key="nickunlock" value="/NICKUNLOCK [nick]
+Allows the user to change nicks.">
+
+<helpop key="chghost" value="/CHGHOST [nickname] [new hostname]
+Changes the hostname of the user to the new hostname.">
+
+<helpop key="chgname" value="/CHGNAME [nickname] [new name]
+Changes the name of the user to the new name.">
+
+<helpop key="chgident" value="/CHGIDENT [nickname] [new ident]
+Changes the ident of the user to the new ident.">
+
+<helpop key="shun" value="/SHUN [user@host] {[duration] :[reason]}
+Sets or removes a shun (serverside ignore) on a host and ident mask.
+You must specify at least 3 parameters to add a shun, and one
+parameter to remove a shun (just the user@host section).
+The duration may be specified in seconds, or in the following format
+1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
+5 minutes and 6 seconds. All fields in this format are optional.">
+
+<helpop key="die" value="/DIE [password]
+If the correct password is provided, and you are an operator,
+This command will shut down the local server.">
+
+<helpop key="restart" value="/RESTART [password]
+If the correct password is provided, and you are an operator,
+This command will restart the local server.">
+
+<helpop key="commands" value="/COMMANDS
+Shows all currently available commands.">
+
+<helpop key="kill" value="/KILL [user] [reason]
+This command will disconnect a user from IRC with the given reason.">
+
+<helpop key="rehash" value="/REHASH
+This command will cause the server configuration file to be
+re-read and values re-initialized.">
+
+<helpop key="trace" value="/TRACE [nick|user@host|servermask]
+This command will provide a list of all users and servers which
+must be passed through or over to reach a given object (server or user).">
+
+<helpop key="connect" value="/CONNECT [servermask]
+Create a mesh connection to the given servermask. You must have
+configured the server for linking in your configuration file,
+and provided a password.">
+
+<helpop key="squit" value="/SQUIT [servermask]
+Disconnects the local server from the mesh network, causing every
+other server in the network to drop it.">
+
+<helpop key="modules" value="/MODULES
+Lists currently loaded modules, their memory offsets and version
+numbers and flags. If you are not an operator, you will see reduced
+detail.">
+
+<helpop key="loadmodule" value="/LOADMODULE [filename.so]
+Loads a module into the IRCd.">
+
+<helpop key="unloadmodule" value="/UNLOADMODULE [filename.so]
+Unloads a module from the IRCd. The module cannot have the static
+flag set (see the output of /MODULES).">
+
+<helpop key="reloadmodule" value="/RELOADMODULE [filename.so]
+Unloads and reloads a module in the IRCd. This module cannot have
+the static flag set (see the output of /MODULES).">
+
+<helpop key="gloadmodule" value="/GLOADMODULE [filename.so]
+Globally loads a module into the network.">
+
+<helpop key="gunloadmodule" value="/GUNLOADMODULE [filename.so]
+Globally unloads a module from the network. The module cannot
+have the static flag set (see the output of /MODULES).">
+
+<helpop key="greloadmodule" value="/GRELOADMODULE [filename.so]
+Globally unloads and reloads a module in the network. This module
+cannot have the static flag set (see the output of /MODULES).">
+
+<helpop key="kline" value="/KLINE [user@host] {[duration] :[reason]}
+Sets or removes a k-line (local host based ban) on a host and ident mask.
+You must specify at least 3 parameters to add a ban, and one
+parameter to remove a ban (just the user@host section).
+The duration may be specified in seconds, or in the following format
+1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
+5 minutes and 6 seconds. All fields in this format are optional.">
+
+<helpop key="zline" value="/ZLINE [ipmask] {[duration] :[reason]}
+Sets or removes a z-line (ip based ban) on an ip range mask.
+You must specify at least 3 parameters to add a ban, and one
+parameter to remove a ban (just the user@host section).
+The duration may be specified in seconds, or in the following format
+1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
+5 minutes and 6 seconds. All fields in this format are optional.">
+
+<helpop key="qline" value="/QLINE [nickmask] {[duration] :[reason]}
+Sets or removes a q-line (nick based ban) on a nick mask.
+You must specify at least 3 parameters to add a ban, and one
+parameter to remove a ban (just the user@host section).
+The duration may be specified in seconds, or in the following format
+1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
+5 minutes and 6 seconds. All fields in this format are optional.">
+
+<helpop key="gline" value="/GLINE [user@host] {[duration] :[reason]}
+Sets or removes a g-line (host based ban) on host mask.
+You must specify at least 3 parameters to add a ban, and one
+parameter to remove a ban (just the user@host section).
+The duration may be specified in seconds, or in the following format
+1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
+5 minutes and 6 seconds. All fields in this format are optional.">
+
+<helpop key="eline" value="/ELINE [user@host] {[duration] :[reason]}
+Sets or removes a e-line (local ban exception) on host mask.
+You must specify at least 3 parameters to add an exception, and one
+parameter to remove an exception (just the user@host section).
+The duration may be specified in seconds, or in the following format
+1y2w3d4h5m6s - meaning one year, two weeks, three days, 4 hours,
+5 minutes and 6 seconds. All fields in this format are optional.">