+#!/usr/bin/perl
+###################################################
+# InspIRCd Configuration Script
+#
+# Copyright 2002-2007 The InspIRCd Development Team
+# http://www.inspircd.org/wiki/index.php/Credits
+#
+# Licensed under GPL, please see the COPYING file
+# for more information
+#
+# $Id$
+#
+###################################################
+
+require 5.8.0;
+use Socket;
+use Cwd;
+use Getopt::Long;
+
+# Utility functions for our buildsystem
+use make::utilities;
+use make::configure;
+use make::gnutlscert;
+use make::opensslcert;
+
+###############################################################################################
+#
+# EDITABLE VARIABLES
+#
+###############################################################################################
+
+# If you wish to ignore a dependency throughout the entire core, add it here.
+
+my @ignoredeps = (
+ "inspircd_win32wrapper.h", # windows has its own configure program
+);
+
+# If you wish for all files in the entire core to have a given dependency, insert it here.
+# You should keep this to an absolute minimum to avoid rebuilds that are not neccessary.
+
+my @immutabledeps = (
+ "inspircd_config.h", # auto re-generated by configure
+ "inspircd.h",
+);
+
+###############################################################################################
+#
+# NON-EDITABLE VARIABLES
+#
+###############################################################################################
+
+# List of commands that make up 'make install' and 'make deinstall'
+
+my $install_list = "";
+my $uninstall_list = "";
+
+# This is a list of all files in the core. Each cpp file is mapped to a shared object file,
+# whos file extension is omitted (these can vary from system to system). Auto detected by
+# scanning the src/*.cpp files for files containing /* $Core: */ identifiers.
+
+my %filelist = ();
+
+# If you wish for a file to have special dependencies in the makefile, add an entry here.
+# Auto populated by /* $ExtraDeps: */ instruction
+
+my %specialdeps = ();
+
+# If you wish for a file to have extra make lines (in between the compile and link steps)
+# then insert them here.
+# Auto populated by /* $ExtraBuild: */ instruction
+
+my %extrabuildlines = ();
+
+# If you wish for a file to be linked against extra objects or arctives, insert them here.
+# Auto populated by /* $ExtraObjects: */ instruction
+
+my %extraobjects = ();
+
+# If you wish to compile extra cpp sources into an object, define them here.
+# NOTE: Certain cpp files such as the socket engines have a value auto calculated
+# for this table so that their derived class is built.
+# Auto populated by /* $ExtraSources: */ instruction
+
+my %extrasources = ();
+
+
+GetOptions (
+ 'enable-gnutls' => \$opt_use_gnutls,
+ 'rebuild' => \$opt_rebuild,
+ 'enable-openssl' => \$opt_use_openssl,
+ 'disable-interactive' => \$opt_nointeractive,
+ 'with-nick-length=i' => \$opt_nick_length,
+ 'with-channel-length=i' => \$opt_chan_length,
+ 'with-max-clients=i' => \$opt_maxclients,
+ 'enable-ports' => \$opt_ports,
+ 'enable-epoll' => \$opt_epoll,
+ 'enable-kqueue' => \$opt_kqueue,
+ 'disable-ports' => \$opt_noports,
+ 'disable-epoll' => \$opt_noepoll,
+ 'disable-kqueue' => \$opt_nokqueue,
+ 'disable-rpath' => \$opt_disablerpath,
+ 'enable-ipv6' => \$opt_ipv6,
+ 'enable-remote-ipv6' => \$opt_ipv6links,
+ 'disable-remote-ipv6' => \$opt_noipv6links,
+ 'with-cc=s' => \$opt_cc,
+ 'with-ident-length=i' => \$opt_ident,
+ 'with-quit-length=i' => \$opt_quit,
+ 'with-topic-length=i' => \$opt_topic,
+ 'with-maxbuf=i' => \$opt_maxbuf,
+ 'with-kick-length=i' => \$opt_kick,
+ 'with-gecos-length=i' => \$opt_gecos,
+ 'with-away-length=i' => \$opt_away,
+ 'with-max-modes=i' => \$opt_modes,
+ 'prefix=s' => \$opt_base_dir,
+ 'config-dir=s' => \$opt_config_dir,
+ 'module-dir=s' => \$opt_module_dir,
+ 'binary-dir=s' => \$opt_binary_dir,
+ 'library-dir=s' => \$opt_library_dir,
+ 'disable-debuginfo' => sub { $opt_disable_debug = 1 },
+ 'help' => sub { showhelp(); },
+ 'modupdate' => sub { modupdate(); },
+ 'update' => sub { update(); },
+ 'svnupdate' => sub { svnupdate(); },
+ 'clean' => sub { clean(); },
+);
+
+my $non_interactive = (
+ (defined $opt_library_dir) ||
+ (defined $opt_base_dir) ||
+ (defined $opt_config_dir) ||
+ (defined $opt_module_dir) ||
+ (defined $opt_base_dir) ||
+ (defined $opt_binary_dir) ||
+ (defined $opt_nointeractive) ||
+ (defined $opt_away) ||
+ (defined $opt_gecos) ||
+ (defined $opt_kick) ||
+ (defined $opt_maxclients) ||
+ (defined $opt_modes) ||
+ (defined $opt_topic) ||
+ (defined $opt_quit) ||
+ (defined $opt_ident) ||
+ (defined $opt_cc) ||
+ (defined $opt_ipv6) ||
+ (defined $opt_ipv6links) ||
+ (defined $opt_noipv6links) ||
+ (defined $opt_kqueue) ||
+ (defined $opt_epoll) ||
+ (defined $opt_ports) ||
+ (defined $opt_maxchans) ||
+ (defined $opt_opermaxchans) ||
+ (defined $opt_chan_length) ||
+ (defined $opt_nick_length) ||
+ (defined $opt_use_openssl) ||
+ (defined $opt_nokqueue) ||
+ (defined $opt_noepoll) ||
+ (defined $opt_noports) ||
+ (defined $opt_maxbuf) ||
+ (defined $opt_use_gnutls)
+);
+my $interactive = !$non_interactive;
+
+
+chomp($topdir = getcwd());
+$this = resolve_directory($topdir); # PWD, Regardless.
+@modlist = (); # Declare for Module List..
+%config = (); # Initiate Configuration Hash..
+$config{ME} = resolve_directory($topdir); # Present Working Directory
+
+$config{BASE_DIR} = $config{ME};
+
+if (defined $opt_base_dir)
+{
+ $config{BASE_DIR} = $opt_base_dir;
+}
+
+$config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Directory
+$config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
+$config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
+$config{LIBRARY_DIR} = resolve_directory($config{BASE_DIR}."/lib"); # Library Directory
+
+if (defined $opt_config_dir)
+{
+ $config{CONFIG_DIR} = $opt_config_dir;
+}
+if (defined $opt_module_dir)
+{
+ $config{MODULE_DIR} = $opt_module_dir;
+}
+if (defined $opt_binary_dir)
+{
+ $config{BINARY_DIR} = $opt_binary_dir;
+}
+if (defined $opt_library_dir)
+{
+ $config{LIBRARY_DIR} = $opt_library_dir;
+}
+chomp($config{HAS_GNUTLS} = `libgnutls-config --version 2>/dev/null | cut -c 1,2,3`); # GNUTLS Version.
+chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version
+chomp($gnutls_ver = $config{HAS_GNUTLS});
+chomp($openssl_ver = $config{HAS_OPENSSL});
+$config{USE_GNUTLS} = "n";
+if (defined $opt_use_gnutls)
+{
+ $config{USE_GNUTLS} = "y"; # Use gnutls.
+}
+$config{USE_OPENSSL} = "n"; # Use openssl.
+if (defined $opt_use_openssl)
+{
+ $config{USE_OPENSSL} = "y";
+}
+
+# no, let's not change these.
+$config{OPTIMITEMP} = "0"; # Default Optimisation Value
+if (!defined $opt_disable_debug)
+{
+ $config{OPTIMISATI} = "-g1"; # Optimisation Flag
+}
+else
+{
+ $config{OPTIMISATI} = "-O2"; # DEBUGGING OFF!
+}
+
+$config{NICK_LENGT} = "31"; # Default Nick Length
+if (defined $opt_nick_length)
+{
+ $config{NICK_LENGT} = $opt_nick_length;
+}
+$config{CHAN_LENGT} = "64"; # Default Channel Name Length
+if (defined $opt_chan_length)
+{
+ $config{CHAN_LENGT} = $opt_chan_length;
+}
+$config{MAXI_MODES} = "20"; # Default Max. Number of Modes set at once.
+if (defined $opt_modes)
+{
+ $config{MAXI_MODES} = $opt_modes;
+}
+$config{HAS_STRLCPY} = "false"; # strlcpy Check.
+$config{HAS_STDINT} = "false"; # stdint.h check
+$config{USE_KQUEUE} = "y"; # kqueue enabled
+if (defined $opt_kqueue)
+{
+ $config{USE_KQUEUE} = "y";
+}
+if (defined $opt_nokqueue)
+{
+ $config{USE_KQUEUE} = "n";
+}
+$config{USE_EPOLL} = "y"; # epoll enabled
+if (defined $opt_epoll)
+{
+ $config{USE_EPOLL} = "y";
+}
+if (defined $opt_noepoll)
+{
+ $config{USE_EPOLL} = "n";
+}
+$config{USE_PORTS} = "y"; # epoll enabled
+if (defined $opt_ports)
+{
+ $config{USE_PORTS} = "y";
+}
+if (defined $opt_noports)
+{
+ $config{USE_PORTS} = "n";
+}
+$config{IPV6} = "n"; # IPv6 support (experimental)
+if (defined $opt_ipv6)
+{
+ $config{IPV6} = "y";
+}
+$config{SUPPORT_IP6LINKS} = "y"; # IPv4 supporting IPv6 links (experimental)
+if (defined $opt_ipv6links)
+{
+ $config{SUPPORT_IP6LINKS} = "y";
+}
+if (defined $opt_noipv6links)
+{
+ $config{SUPPORT_IP6LINKS} = "n";
+}
+chomp($config{MAX_CLIENT_T} = `sh -c \"ulimit -n\"`); # FD Limit
+chomp($config{MAX_DESCRIPTORS} = `sh -c \"ulimit -n\"`); # Hard FD Limit
+chomp($config{GCCVER} = `g++ -dumpversion | cut -c 1`); # Major GCC Version
+$config{_SOMAXCONN} = SOMAXCONN; # Max connections in accept queue
+$config{OSNAME} = $^O; # Operating System Name
+$config{IS_DARWIN} = "NO"; # Is OSX?
+$config{STARTSCRIPT} = "inspircd"; # start script?
+$config{DESTINATION} = "BASE"; # Is target path.
+$config{EXTRA_DIR} = ""; # Is empty.
+if ($config{OSNAME} =~ /darwin/i)
+{
+ $config{IS_DARWIN} = "YES";
+ $config{STARTSCRIPT} = "org.inspircd.plist"; # start script for OSX.
+ $config{DESTINATION} = "LAUNCHDPATH"; # Is OSX target.
+ $config{EXTRA_DIR} = " launchd_dir"; # Is OSX specific path.
+}
+$config{CC} = "g++"; # C++ compiler
+if (defined $opt_cc)
+{
+ $config{CC} = $opt_cc;
+}
+$exec = $config{CC} . " -dumpversion | cut -c 1";
+chomp($config{GCCVER} = `$exec`); # Major GCC Version
+$config{MAKEORDER} = "ircd mods"; # build order
+$config{MAX_IDENT} = "12"; # max ident size
+$config{MAX_QUIT} = "255"; # max quit message size
+$config{MAX_TOPIC} = "307"; # max topic size
+$config{MAX_KICK} = "255"; # max kick message size
+$config{MAX_GECOS} = "128"; # max GECOS size
+$config{MAX_AWAY} = "200"; # max AWAY size
+$config{MAXBUF} = "512"; # Max buffer size
+if (defined $opt_ident)
+{
+ $config{MAX_IDENT} = $opt_ident;
+}
+if (defined $opt_quit)
+{
+ $config{MAX_QUIT} = $opt_quit;
+}
+if (defined $opt_topic)
+{
+ $config{MAX_TOPIC} = $opt_topic;
+}
+if (defined $opt_kick)
+{
+ $config{MAX_KICK} = $opt_kick;
+}
+if (defined $opt_gecos)
+{
+ $config{MAX_GECOS} = $opt_gecos;
+}
+if (defined $opt_away)
+{
+ $config{MAX_AWAY} = $opt_away;
+}
+
+$config{HAS_OPENSSL} =~ /^([-[:digit:].]+)([a-z])?(\-[a-z][0-9])?$/;
+$config{HAS_OPENSSL} = $1;
+
+if ($config{GCCVER} eq "") {
+ print $config{CC} . " was not found! You require g++ (the GNU C++ compiler, part of GCC) to build InspIRCd!\n";
+ exit;
+}
+
+if (!$config{MAX_CLIENT_T}) {
+ $config{MAX_CLIENT_T} = 1024; # Set a reasonable 'Default'
+ $fd_scan_fail = "true"; # Used Later
+}
+
+# Get and Set some important vars..
+getmodules();
+
+sub clean
+{
+ unlink(".config.cache");
+}
+
+sub update
+{
+ eval {
+ chomp($topdir = getcwd());
+ $this = resolve_directory($topdir); # PWD, Regardless.
+ getmodules();
+ # Does the cache file exist?
+ if (!getcache()) {
+ # No, No it doesn't.. *BASH*
+ print "You have not run ./configure before. Please do this before trying to run the update script.\n";
+ exit 0;
+ } else {
+ # We've Loaded the cache file and all our variables..
+ print "Updating files...\n";
+ getosflags();
+ if ($opt_disable_debug == 1)
+ {
+ print "Disabling debug information (-g).\n";
+ $config{OPTIMISATI} = "";
+ getosflags();
+ }
+ $has_epoll = $config{HAS_EPOLL};
+ $has_ports = $config{HAS_PORTS};
+ $has_kqueue = $config{HAS_KQUEUE};
+ writefiles(1);
+ makecache();
+ print "Complete.\n";
+ exit;
+ }
+ };
+ if ($@)
+ {
+ print "Configure update failed: $@\n";
+ }
+ exit;
+}
+
+sub modupdate
+{
+ eval {
+ chomp($topdir = getcwd());
+ $this = resolve_directory($topdir); # PWD, Regardless.
+ getmodules();
+ # Does the cache file exist?
+ if (!getcache()) {
+ # No, No it doesn't.. *BASH*
+ print "You have not run ./configure before. Please do this before trying to run the update script.\n";
+ exit 0;
+ } else {
+ # We've Loaded the cache file and all our variables..
+ print "Updating files...\n";
+ getosflags();
+ $has_epoll = $config{HAS_EPOLL};
+ $has_ports = $config{HAS_PORTS};
+ $has_kqueue = $config{HAS_KQUEUE};
+ writefiles(0);
+ makecache();
+ print "Complete.\n";
+ exit;
+ }
+ };
+ if ($@)
+ {
+ print "Module update failed: $@\n";
+ }
+ exit;
+}
+
+
+
+sub svnupdate
+{
+ my $fail = 0;
+ open(FH,"<.svn/entries") or $fail = 1;
+ if ($fail) {
+ print "This is not an SVN copy of InspIRCd.\n";
+ exit;
+ }
+ else
+ {
+ close(FH);
+ }
+ system("svn update");
+ system("perl configure -update");
+ if (defined $opt_rebuild) {
+ system("make install");
+ }
+ exit;
+}
+
+print "Running non-interactive configure...\n" unless $interactive;
+print "Checking for cache from previous configure... ";
+print ((!getcache()) ? "not found\n" : "found\n");
+print "Checking operating system version... ";
+print getosflags() . "\n";
+
+if (defined $opt_maxclients)
+{
+ $config{MAX_CLIENT} = $opt_maxclients;
+}
+
+if (!$config{MAX_CLIENT}) {
+ # If the cache hasn't set the max clients, copy the variable of MAX_CLIENT_T, this
+ # allows us to keep _T for testing purposes. (ie. "Are you sure you want to go
+ # higher than the found value" :))
+ $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
+}
+
+printf "Checking if stdint.h exists... ";
+$config{HAS_STDINT} = "true";
+my $fail = 0;
+open(STDINT, "</usr/include/stdint.h") or $config{HAS_STDINT} = "false";
+if ($config{HAS_STDINT} eq "true") {
+ close(STDINT);
+}
+print "yes\n" if $config{HAS_STDINT} eq "true";
+print "no\n" if $config{HAS_STDINT} eq "false";
+
+
+printf "Checking if strlcpy exists... ";
+# Perform the strlcpy() test..
+$config{HAS_STRLCPY} = "false";
+my $fail = 0;
+open(STRLCPY, "</usr/include/string.h") or $fail = 1;
+if (!$fail) {
+ while (chomp($line = <STRLCPY>)) {
+ # try and find the delcaration of:
+ # size_t strlcpy(...)
+ if ($line =~ /size_t(\0x9|\s)+strlcpy/) {
+ $config{HAS_STRLCPY} = "true";
+ }
+ }
+ close(STRLCPY);
+}
+print "yes\n" if $config{HAS_STRLCPY} eq "true";
+print "no\n" if $config{HAS_STRLCPY} eq "false";
+
+
+printf "Checking if kqueue exists... ";
+$has_kqueue = 0;
+$fail = 0;
+open(KQUEUE, "</usr/include/sys/event.h") or $fail = 1;
+if (!$fail) {
+ while (chomp($line = <KQUEUE>)) {
+ # try and find the delcaration of:
+ # int kqueue(void);
+ if ($line =~ /int(\0x9|\s)+kqueue/) {
+ $has_kqueue = 1;
+ }
+ }
+ close(KQUEUE);
+}
+print "yes\n" if $has_kqueue == 1;
+print "no\n" if $has_kqueue == 0;
+
+printf "Checking if epoll exists... ";
+$has_epoll = 0;
+$fail = 0;
+open(EPOLL, "</usr/include/sys/epoll.h") or $fail = 1;
+if (!$fail) {
+ $has_epoll = 1;
+ close(EPOLL);
+}
+if ($has_epoll) {
+ my $kernel = `uname -r`;
+ chomp($kernel);
+ if (($kernel =~ /^2\.0\./) || ($kernel =~ /^2\.2\./) || ($kernel =~ /^2\.4\./)) {
+ $has_epoll = 0;
+ }
+ else
+ {
+ # Suggestion from nenolod, weed out odd systems which have glibc built
+ # against 2.4 kernels (ick)
+ my $kernel_arch = `uname -p`;
+ chomp($kernel_arch);
+ $libcv = 0.0;
+ $kernelv = 0.0;
+ if ($kernel_arch =~ /x86_64/) {
+ open (FH,"/lib64/libc.so.6|") or $has_epoll = 0;
+ }
+ else {
+ open (FH,"/lib/libc.so.6|") or $has_epoll = 0;
+ }
+ if ($has_epoll)
+ {
+ while (chomp($line = <FH>))
+ {
+ if ($line =~ /GNU C Library .* version (.*?) /)
+ {
+ $libcv = $1;
+ $libcv =~ /(\d+\.\d+)/;
+ $libcv = $1;
+ }
+ elsif ($line =~ /Compiled on a Linux (.*?\..*?)\.* system/)
+ {
+ $kernelv = $1;
+ # Fix for some retarded libc builds, strip off >> and << etc.
+ $kernelv =~ /(\d+\.\d+)/;
+ $kernelv = $1;
+ }
+ }
+ close FH;
+ if ($libcv < 2.3)
+ {
+ $has_epoll = 0;
+ printf "libc too old: $libcv... ";
+ }
+ if ($kernelv < 2.6)
+ {
+ $has_epoll = 0;
+ printf "libc built against older kernel $kernelv... ";
+ }
+ }
+ }
+}
+print "yes\n" if $has_epoll == 1;
+print "no\n" if $has_epoll == 0;
+
+printf "Checking if Solaris I/O completion ports are available... ";
+$has_ports = 0;
+my $system = `uname -s`;
+chomp ($system);
+$has_ports = 1 if ($system eq "SunOS");
+
+if ($has_ports) {
+ my $kernel = `uname -r`;
+ chomp($kernel);
+ if (($kernel !~ /^5\.1./)) {
+ $has_ports = 0;
+ }
+}
+print "yes\n" if $has_ports == 1;
+print "no\n" if $has_ports == 0;
+
+$config{HAS_EPOLL} = $has_epoll;
+$config{HAS_KQUEUE} = $has_kqueue;
+
+printf "Checking for libgnutls... ";
+if (($config{HAS_GNUTLS}) || ($config{HAS_GNUTLS} eq "y")) {
+ print "yes\n";
+ $config{HAS_GNUTLS} = "y";
+} else {
+ print "no\n";
+ $config{HAS_GNUTLS} = "n";
+}
+
+printf "Checking for openssl... ";
+if (($config{HAS_OPENSSL}) || ($config{HAS_OPENSSL} eq "y")) {
+ print "yes\n";
+ $config{HAS_OPENSSL} = "y";
+} else {
+ print "no\n";
+ $config{HAS_OPENSSL} = "n";
+}
+
+printf "Checking if you are running an ancient, unsupported OS... ";
+if ($config{OSNAME} =~ /FreeBSD/i)
+{
+ $version = `uname -r`;
+ if ($version =~ /^4\./)
+ {
+ $foundit = `ls -l /usr/local/lib/libgnugetopt* | wc -l`;
+ if ($foundit > 0)
+ {
+ # ICKY ICKY ICK, FREEBSD 4.x! GET AN UPGRADE!
+ $config{CRAQ} = "-L/usr/local/lib -lgnugetopt -DHAVE_DECL_GETOPT=1";
+ print "yes\n";
+ }
+ else
+ {
+ print "\n\nERROR: You require libgnugetopt (from ports or packages) to build InspIRCd on FreeBSD 4.11.\n";
+ }
+ }
+ else
+ {
+ $config{CRAQ} = " ";
+ print "no ($version)\n";
+ }
+}
+else
+{
+ $config{CRAQ} = " ";
+ print "no ($config{OSNAME})\n";
+}
+
+################################################################################
+# BEGIN INTERACTIVE PART #
+################################################################################
+
+# Clear the Screen..
+if ($interactive)
+{
+ system("clear");
+ $wholeos = $^O;
+
+ my $rev = getrevision();
+ # Display Introduction Message..
+ print "
+Welcome to the \033[1mInspIRCd\033[0m Configuration program! (\033[1minteractive mode\033[0m)
+\033[1mPackage maintainers: Type ./configure --help for non-interactive help\033[0m
+
+*** If you are unsure of any of these values, leave it blank for ***
+*** standard settings that will work, and your server will run ***
+*** using them. Please consult your IRC network admin if in doubt. ***
+
+Press \033[1m<RETURN>\033[0m to accept the default for any option, or enter
+a new value. Please note: You will \033[1mHAVE\033[0m to read the docs
+dir, otherwise you won't have a config file!
+
+Your operating system is: \033[1;32m$config{OSNAME}\033[0m ($wholeos)
+Maximum file descriptors: \033[1;32m$config{MAX_CLIENT_T}\033[0m
+Your InspIRCd revision ID is \033[1;32mr$rev\033[0m";
+ if ($rev eq "r0") {
+ print " (Non-SVN build)";
+ }
+ print ".\n\n";
+
+ $config{CHANGE_COMPILER} = "n";
+ print "I have detected the following compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.x\033[0m)\n";
+
+ while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
+ print "\033[1;32mIMPORTANT!\033[0m A GCC 2.x compiler has been detected, and
+should NOT be used. You should probably specify a newer compiler.\n\n";
+ yesno(CHANGE_COMPILER,"Do you want to change the compiler?");
+ if ($config{CHANGE_COMPILER} =~ /y/i) {
+ print "What command do you want to use to invoke your compiler?\n";
+ print "[\033[1;32m$config{CC}\033[0m] -> ";
+ chomp($config{CC} = <STDIN>);
+ if ($config{CC} eq "") {
+ $config{CC} = "g++";
+ }
+ chomp($foo = `$config{CC} -dumpversion | cut -c 1`);
+ if ($foo ne "") {
+ chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
+ print "Queried compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.x\033[0m)\n";
+ if ($config{GCCVER} < 3) {
+ print "\033[1;32mGCC 2.x WILL NOT WORK!\033[0m. Let's try that again, shall we?\n";
+ }
+ }
+ else {
+ print "\033[1;32mWARNING!\033[0m Could not execute the compiler you specified. You may want to try again.\n";
+ }
+ }
+ }
+
+ print "\n";
+
+ # Directory Settings..
+ my $tmpbase = $config{BASE_DIR};
+ dir_check("do you wish to install the InspIRCd base", "BASE_DIR");
+ if ($tmpbase ne $config{BASE_DIR}) {
+ $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Dir
+ $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
+ $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
+ $config{LIBRARY_DIR} = resolve_directory($config{BASE_DIR}."/lib"); # Library Directory
+ }
+
+ dir_check("are the configuration files", "CONFIG_DIR");
+ dir_check("are the modules to be compiled to", "MODULE_DIR");
+ dir_check("is the IRCd binary to be placed", "BINARY_DIR");
+ dir_check("are the IRCd libraries to be placed", "LIBRARY_DIR");
+
+ if ($has_kqueue) {
+ yesno(USE_KQUEUE,"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
+ print "\n";
+ }
+ if ($has_epoll) {
+ yesno(USE_EPOLL,"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
+ print "\n";
+ }
+ if ($has_ports) {
+ yesno(USE_PORTS,"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
+ print "\n";
+ }
+ $chose_hiperf = (($config{USE_EPOLL} eq "y") || ($config{USE_KQUEUE} eq "y") || ($config{USE_PORTS} eq "y"));
+ if (!$chose_hiperf) {
+ print "No high-performance socket engines are available, or you chose\n";
+ print "not to enable one. Defaulting to select() engine.\n\n";
+ }
+
+ yesno(IPV6,"Would you like to build InspIRCd with IPv6 support?");
+ print "\n";
+
+ if ($config{IPV6} eq "y") {
+ print "You have chosen to build an \033[1;32mIPV6-enabled\033[0m server.\nTo accept IPV4 users, you can still use IPV4 addresses\nin your port bindings..\n\n";
+ $config{SUPPORT_IP6LINKS} = "y";
+ } else {
+ yesno(SUPPORT_IP6LINKS,"You have chosen to build an \033[1;32mIPV4-only\033[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers?\nIf you are using a recent operating\nsystem and are unsure, answer yes.\nIf you answer 'no' here, your InspIRCd server will be unable\nto parse IPV6 addresses (e.g. for CIDR bans)");
+ print "\n";
+ }
+
+ if (($config{HAS_GNUTLS} eq "y") && ($config{HAS_OPENSSL} eq "y")) {
+ print "I have detected both \033[1;32mGnuTLS\033[0m and \033[1;32mOpenSSL\033[0m on your system.\n";
+ print "I will default to GnuTLS. If you wish to use OpenSSL\n";
+ print "instead, you should enable the OpenSSL module yourself\n";
+ print "by copying it from src/modules/extra to src/modules.\n\n";
+ print "Detected GnuTLS version: \033[1;32m" . $gnutls_ver . "\033[0m\n";
+ print "Detected OpenSSL version: \033[1;32m" . $openssl_ver . "\033[0m\n\n";
+ }
+
+ if ($config{HAS_GNUTLS} eq "y") {
+ yesno(USE_GNUTLS, "Would you like to enable SSL Support?");
+ if ($config{USE_GNUTLS} eq "y") {
+ print "\nUsing GnuTLS SSL module.\n";
+ }
+ } elsif ($config{HAS_OPENSSL} eq "y") {
+ yesno(USE_OPENSSL, "Would you like to enable SSL Support?");
+ if ($config{USE_OPENSSL} eq "y") {
+ print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
+ }
+ }
+ else {
+ print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed if\nyou intend to use OpenSSL, or that GnuTLS is in your path if you intend\nto use GnuTLS.\n\n";
+ }
+
+ print "\nThe following questions will ask you for various figures relating\n";
+ print "To your IRCd install. Please note that these should usually be left\n";
+ print "as defaults unless you have a real reason to change them. If they\n";
+ print "changed, then the values must be identical on all servers on your\n";
+ print "network, or malfunctions and/or crashes may occur, with the exception\n";
+ print "of the 'maximum number of clients' setting which may be different on\n";
+ print "different servers on the network.\n\n";
+
+ # File Descriptor Settings..
+ promptnumeric("number of clients at any one time", "MAX_CLIENT_T");
+ $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
+ $config{MAX_DESCRIPTORS} = $config{MAX_CLIENT_T};
+
+ promptnumeric("length of nicknames", "NICK_LENGT");
+ promptnumeric("length of channel names", "CHAN_LENGT");
+ promptnumeric("number of mode changes in one line", "MAXI_MODES");
+ promptnumeric("length of an ident (username)", "MAX_IDENT");
+ promptnumeric("length of a quit message", "MAX_QUIT");
+ promptnumeric("length of a channel topic", "MAX_TOPIC");
+ promptnumeric("length of a kick message", "MAX_KICK");
+ promptnumeric("length of a GECOS (real name)", "MAX_GECOS");
+ promptnumeric("length of an away message", "MAX_AWAY");
+}
+
+dumphash();
+
+if (($config{USE_GNUTLS} eq "y") && ($config{HAS_GNUTLS} ne "y"))
+{
+ print "Sorry, but i couldn't detect gnutls. Make sure gnutls-config is in your path.\n";
+ exit(0);
+}
+if (($config{USE_OPENSSL} eq "y") && ($config{HAS_OPENSSL} ne "y"))
+{
+ print "Sorry, but i couldn't detect openssl. Make sure openssl is in your path.\n";
+ exit(0);
+}
+
+if ($config{USE_GNUTLS} eq "y") {
+ $failed = 0;
+ open(TMP, "<src/modules/m_ssl_gnutls.cpp") or $failed = 1;
+ close(TMP);
+ if ($failed) {
+ print "Symlinking src/modules/m_ssl_gnutls.cpp from extra/\n";
+ chdir("src/modules");
+ system("ln -s extra/m_ssl_gnutls.cpp");
+ chdir("../..");
+ }
+ getmodules();
+ if ($interactive)
+ {
+ $failed = 0;
+ open(TMP, "<$config{CONFIG_DIR}/key.pem") or $failed = 1;
+ close(TMP);
+ open(TMP, "<$config{CONFIG_DIR}/cert.pem") or $failed = 1;
+ close(TMP);
+ if ($failed) {
+ print "SSL Certificates Not found, Generating.. \n\n
+*************************************************************
+* Generating the Private Key may take some time, go grab a *
+* Coffee. Even better, to generate some more entropy if it *
+* is taking a while, open another console and type du / a *
+* few times and get that HD going :) Then answer the *
+* Questions which follow. If you are unsure, just hit enter *
+*************************************************************\n\n";
+ $failed = make_gnutls_cert();
+ if ($failed) {
+ print "\n\033[1;32mCertificate generation failed!\033[0m\n\n";
+ } else {
+ print "\nCertificate generation complete, copying to config directory... ";
+ system("mv key.pem $config{CONFIG_DIR}/key.pem");
+ system("mv cert.pem $config{CONFIG_DIR}/cert.pem");
+ print "Done.\n\n";
+ }
+ }
+ else {
+ print "SSL Certificates found, skipping.\n\n";
+ }
+ }
+ else
+ {
+ print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
+ }
+} elsif ($config{USE_OPENSSL} eq "y") {
+ $failed = 0;
+ open(TMP, "<src/modules/m_ssl_openssl.cpp") or $failed = 1;
+ close(TMP);
+ if ($failed) {
+ print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
+ chdir("src/modules");
+ system("ln -s extra/m_ssl_openssl.cpp");
+ chdir("../..");
+ }
+ getmodules();
+ $failed = 0;
+ if ($interactive)
+ {
+ open(TMP, "<$config{CONFIG_DIR}/key.pem") or $failed = 1;
+ close(TMP);
+ open(TMP, "<$config{CONFIG_DIR}/cert.pem") or $failed = 1;
+ close(TMP);
+ if ($failed) {
+ print "SSL Certificates Not found, Generating.. \n\n
+*************************************************************
+* Generating the certificates may take some time, go grab a *
+* coffee, or something. *
+*************************************************************\n\n";
+ make_openssl_cert();
+ print "\nCertificate generation complete, copying to config directory... ";
+ system("mv key.pem $config{CONFIG_DIR}/key.pem");
+ system("mv cert.pem $config{CONFIG_DIR}/cert.pem");
+ system("mv dhparams.pem $config{CONFIG_DIR}/dhparams.pem");
+ print "Done.\n\n";
+ } else {
+ print "SSL Certificates found, skipping.\n\n"
+ }
+ }
+ else
+ {
+ print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
+ }
+}
+if (($config{USE_GNUTLS} eq "n") && ($config{USE_OPENSSL} eq "n")) {
+ print "Skipping SSL Certificate generation, SSL support is not available.\n\n";
+}
+
+getosflags();
+writefiles(1);
+makecache();
+
+print "\n\n";
+print "To build your server with these settings, please type '\033[1;32m$config{MAKEPROG}\033[0m' now.\n";
+if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
+ print "Please remember that to enable \033[1;32mSSL support\033[0m you must\n";
+ print "load the required modules in your config. This configure process\n";
+ print "has just prepared these modules to be compiled for you, and has not\n";
+ print "configured them to be compiled into the core of the ircd.\n";
+}
+print "*** \033[1;32mRemember to edit your configuration files!!!\033[0m ***\n\n\n";
+if (($config{OSNAME} eq "OpenBSD") && ($config{CC} ne "eg++")) {
+ print "\033[1;32mWARNING!\033[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but i'm letting you\ngo ahead with it anyway, just in case i'm wrong :-)\n";
+}
+
+if ($config{GCCVER} < "3") {
+ print <<FOO2;
+\033[1;32mWARNING!\033[0m You are attempting to compile InspIRCd on GCC 2.x!
+GCC 2.x series compilers only had partial (read as broken) C++ support, and
+your compile will most likely fail horribly! If you have any problems, do NOT
+report them to the bugtracker or forums without first upgrading your compiler
+to a newer 3.x or 4.x (or whatever is available currently) version.
+FOO2
+}
+
+################################################################################
+# HELPER FUNCTIONS #
+################################################################################
+sub getcache {
+ # Retrieves the .config.cache file, and loads values into the main config hash.
+ open(CACHE, ".config.cache") or return 0;
+ while (<CACHE>) {
+ chomp;
+ # Ignore Blank lines, and comments..
+ next if /^\s*$/;
+ next if /^\s*#/;
+ my ($key, $value) = split("=", $_, 2);
+ $value =~ /^\"(.*)\"$/;
+ # Do something with data here!
+ $config{$key} = $1;
+ }
+ close(CONFIG);
+ return 1;
+}
+
+sub makecache {
+ # Dump the contents of %config
+ print "Writing \033[1;32mcache file\033[0m for future ./configures ...\n";
+ open(FILEHANDLE, ">.config.cache");
+ foreach $key (keys %config) {
+ print FILEHANDLE "$key=\"$config{$key}\"\n";
+ }
+ close(FILEHANDLE);
+}
+
+sub dir_check {
+ my ($desc, $hash_key) = @_;
+ my $complete = 0;
+ while (!$complete) {
+ print "In what directory $desc?\n";
+ print "[\033[1;32m$config{$hash_key}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{$hash_key};
+ }
+ if ($var =~ /^\~\/(.+)$/) {
+ # Convert it to a full path..
+ $var = resolve_directory($ENV{HOME} . "/" . $1);
+ }
+ elsif ((($config{OSNAME} =~ /MINGW32/i) and ($var !~ /^[A-Z]{1}:\\.*/)) and (substr($var,0,1) ne "/"))
+ {
+ # Assume relative Path was given.. fill in the rest.
+ $var = $this . "/$var";
+ }
+
+ $var = resolve_directory($var);
+ if (! -e $var) {
+ print "$var does not exist. Create it?\n[\033[1;32my\033[0m] ";
+ chomp($tmp = <STDIN>);
+ if (($tmp eq "") || ($tmp =~ /^y/i)) {
+ # Attempt to Create the Dir..
+
+ system("mkdir -p \"$var\" >> /dev/null 2>&1");
+ $chk = system("mkdir -p \"$var\" >> /dev/null 2>&1") / 256;
+ if ($chk != 0) {
+ print "Unable to create directory. ($var)\n\n";
+ # Restart Loop..
+ next;
+ }
+ } else {
+ # They said they don't want to create, and we can't install there.
+ print "\n\n";
+ next;
+ }
+ } else {
+ if (!is_dir($var)) {
+ # Target exists, but is not a directory.
+ print "File $var exists, but is not a directory.\n\n";
+ next;
+ }
+ }
+ # Either Dir Exists, or was created fine.
+ $config{$hash_key} = $var;
+ $complete = 1;
+ print "\n";
+ }
+}
+
+sub getosflags {
+
+ $config{LDLIBS} = "-lstdc++";
+ $config{FLAGS} = "-fPIC -Wall -pedantic $config{OPTIMISATI}";
+ $config{DEVELOPER} = "-fPIC -Wall -pedantic -g";
+ $SHARED = "-Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared" unless defined $opt_disablerpath;
+ $config{MAKEPROG} = "make";
+
+ if ($config{OSNAME} =~ /darwin/i) {
+ $config{FLAGS} = "-DDARWIN -frtti -fPIC -Wall -pedantic $config{OPTIMISATI}";
+ $SHARED = "-bundle -twolevel_namespace -undefined dynamic_lookup";
+ $config{LDLIBS} = "-ldl -lstdc++";
+ }
+
+ if ($config{OSNAME} =~ /OpenBSD/i) {
+ $config{MAKEPROG} = "gmake";
+ $config{LDLIBS} = $config{LDLIBS} . " -lunwind";
+ chomp($foo = `eg++ -dumpversion | cut -c 1`);
+ # theyre running the package version of gcc (eg++)... detect it and set up its version numbers.
+ # if theyre not running this, configure lets the build continue but they probably wont manage to
+ # compile as this standard version is 2.95.3!
+ if ($foo ne "") {
+ $config{CC} = "eg++";
+ chomp($config{GCCVER} = `eg++ -dumpversion | cut -c 1`); # we must redo these if we change the compiler path
+ }
+ return "OpenBSD";
+ }
+
+ if ($config{OSNAME} =~ /Linux/i) {
+ $config{LDLIBS} = "-ldl -lstdc++";
+ $config{FLAGS} = "-fPIC -Wall -pedantic $config{OPTIMISATI}";
+ $config{FLAGS} .= " " . $ENV{CXXFLAGS} if exists($ENV{CXXFLAGS});
+ $config{LDLIBS} .= " " . $ENV{LDLIBS} if exists($ENV{LDLIBS});
+ $config{MAKEPROG} = "make";
+ }
+
+ if ($config{OSNAME} =~ /FreeBSD/i) {
+ $config{FLAGS} .= " " . $ENV{CXXFLAGS} if exists($ENV{CXXFLAGS});
+ $config{LDLIBS} .= " " . $ENV{LDLIBS} if exists($ENV{LDLIBS});
+ }
+
+ if ($config{OSNAME} =~ /SunOS/i or $config{OSNAME} =~ /solaris/i)
+ {
+ # solaris/sunos needs these
+ # socket = bsd sockets api
+ # nsl = dns stuff
+ # rt = POSIX realtime extensions
+ # resolv = inet_aton only (why isnt this in nsl?!)
+ $config{MAKEPROG} = "gmake";
+ $config{LDLIBS} .= " -lsocket -lnsl -lrt -lresolv";
+ return "Solaris";
+ }
+
+ if($config{OSNAME} =~ /MINGW32/i)
+ {
+ # All code is position-independent on windows
+ $config{FLAGS} =~ s/-fPIC //;
+ return "MinGW";
+ }
+
+ return $config{OSNAME};
+}
+
+sub writefiles {
+ my($writeheader) = @_;
+ # First File.. inspircd_config.h
+ chomp(my $incos = `uname -n -s -r`);
+ chomp($version = `sh src/version.sh`);
+ chomp(my $revision2 = getrevision());
+ if ($writeheader == 1)
+ {
+ print "Writing \033[1;32minspircd_config.h\033[0m\n";
+ open(FILEHANDLE, ">include/inspircd_config.h");
+ my $NL = $config{NICK_LENGT}+1;
+ my $CL = $config{CHAN_LENGT}+1;
+ print FILEHANDLE <<EOF;
+/* Auto generated by configure, do not modify! */
+#ifndef __CONFIGURATION_AUTO__
+#define __CONFIGURATION_AUTO__
+
+/* this is for windows support. */
+#define CoreExport /**/
+#define DllExport /**/
+
+#define CONFIG_FILE "$config{CONFIG_DIR}/inspircd.conf"
+#define MOD_PATH "$config{MODULE_DIR}"
+#define VERSION "$version"
+#define REVISION "$revision2"
+#define MAXCLIENTS $config{MAX_CLIENT}
+#define MAXCLIENTS_S "$config{MAX_CLIENT}"
+#define SOMAXCONN_S "$config{_SOMAXCONN}"
+#define MAX_DESCRIPTORS $config{MAX_DESCRIPTORS}
+#define NICKMAX $NL
+#define CHANMAX $CL
+#define MAXMODES $config{MAXI_MODES}
+#define IDENTMAX $config{MAX_IDENT}
+#define MAXQUIT $config{MAX_QUIT}
+#define MAXTOPIC $config{MAX_TOPIC}
+#define MAXKICK $config{MAX_KICK}
+#define MAXGECOS $config{MAX_GECOS}
+#define MAXAWAY $config{MAX_AWAY}
+#define OPTIMISATION $config{OPTIMITEMP}
+#define LIBRARYDIR "$config{LIBRARY_DIR}"
+#define SYSTEM "$incos"
+EOF
+print FILEHANDLE "#define MAXBUF " . ($config{MAXBUF}+2) . "\n";
+
+ if ($config{OSNAME} =~ /SunOS/i) {
+ print FILEHANDLE "#define IS_SOLARIS\n";
+ }
+ if ($config{OSNAME} =~ /MINGW32/i) {
+ print FILEHANDLE "#define IS_MINGW\n";
+ }
+ if ($config{GCCVER} >= 3) {
+ print FILEHANDLE "#define GCC3\n";
+ }
+ if ($config{HAS_STRLCPY} eq "true") {
+ print FILEHANDLE "#define HAS_STRLCPY\n";
+ }
+ if ($config{HAS_STDINT} eq "true") {
+ print FILEHANDLE "#define HAS_STDINT\n";
+ }
+ if ($config{IPV6} =~ /y/i) {
+ print FILEHANDLE "#define IPV6\n";
+ }
+ if ($config{SUPPORT_IP6LINKS} =~ /y/i) {
+ print FILEHANDLE "#define SUPPORT_IP6LINKS\n";
+ }
+ my $use_hiperf = 0;
+ if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
+ print FILEHANDLE "#define USE_KQUEUE\n";
+ $se = "socketengine_kqueue";
+ $use_hiperf = 1;
+ }
+ if (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
+ print FILEHANDLE "#define USE_EPOLL\n";
+ $se = "socketengine_epoll";
+ $use_hiperf = 1;
+ }
+ if (($has_ports) && ($config{USE_PORTS} eq "y")) {
+ print FILEHANDLE "#define USE_PORTS\n";
+ $se = "socketengine_ports";
+ $use_hiperf = 1;
+ }
+ # user didn't choose either epoll or select for their OS.
+ # default them to USE_SELECT (ewwy puke puke)
+ if (!$use_hiperf) {
+ print FILEHANDLE "#define USE_SELECT\n";
+ $se = "socketengine_select";
+ }
+ print FILEHANDLE "\n#endif\n";
+ close(FILEHANDLE);
+ }
+
+ if ($writeheader)
+ {
+ open(FILEHANDLE, ">include/inspircd_se_config.h");
+ print FILEHANDLE <<EOF;
+/* Auto generated by configure, do not modify or commit to svn! */
+#ifndef __CONFIGURATION_SOCKETENGINE__
+#define __CONFIGURATION_SOCKETENGINE__
+
+#include "socketengines/$se.h"
+
+#endif
+EOF
+ close(FILEHANDLE);
+ }
+
+
+ # Create a Modules List..
+ my $modules = "";
+ foreach $i (@modlist)
+ {
+ $modules .= "m_".$i.".so ";
+ }
+ chomp($modules); # Remove Redundant whitespace..
+
+ opendir(DIRHANDLE, "src/modules");
+ foreach $name (sort readdir(DIRHANDLE)) {
+ if ($name =~ /^m_(.+?)$/) {
+ if (opendir(MDIRHANDLE, "src/modules/$name") != 0) {
+ closedir(MDIRHANDLE);
+ $modules .= "$name.so ";
+ $uninstall_list = $uninstall_list . " -rm \$(MODULES)/$name.so\n";
+ }
+ }
+ }
+ closedir(DIRHANDLE);
+
+
+ # Write all .in files.
+ my $tmp = "";
+ my $file = "";
+ my $exe = "inspircd";
+
+ # Do this once here, and cache it in the .*.inc files,
+ # rather than attempting to read src/version.sh from
+ # compiled code -- we might not have the source to hand.
+ # Fix for bug#177 by Brain.
+
+ chomp(my $version = `sh ./src/version.sh`);
+ chomp(my $revision = getrevision());
+ $version = "$version(r$revision)";
+
+ # We can actually parse any file starting with . and ending with .inc,
+ # but right now we only parse .inspircd.inc to form './inspircd'
+
+ print "Writing \033[1;32mMakefiles\033[0m\n";
+ write_dynamic_modules_makefile();
+ write_dynamic_makefile();
+
+ opendir(DIRHANDLE, $this);
+
+ foreach $name (sort readdir(DIRHANDLE)) {
+ if ($name =~ /^\.(.+)\.inc$/) {
+ $file = $1;
+
+ # Bug #353, omit this on non-darwin
+ next if (($config{OSNAME} !~ /darwin/) && ($file eq "org.inspircd.plist"));
+
+ # All .name.inc files need parsing!
+ $tmp = "";
+ open(FILEHANDLE, ".$file.inc") or die ("Can't open .$file.inc");
+ while (<FILEHANDLE>) {
+ $tmp .= $_;
+ }
+ close(FILEHANDLE);
+
+ print "Writing \033[1;32m$file\033[0m ...\n";
+ $tmp =~ s/\@CC\@/$config{CC}/;
+ $tmp =~ s/\@MAKEPROG\@/$config{MAKEPROG}/;
+ $tmp =~ s/\@FLAGS\@/$config{FLAGS}/;
+ $tmp =~ s/\@DEVELOPER\@/$config{DEVELOPER}/;
+ $tmp =~ s/\@LDLIBS\@/$config{LDLIBS}/;
+ $tmp =~ s/\@BASE_DIR\@/$config{BASE_DIR}/;
+ $tmp =~ s/\@CONFIG_DIR\@/$config{CONFIG_DIR}/;
+ $tmp =~ s/\@MODULE_DIR\@/$config{MODULE_DIR}/;
+ $tmp =~ s/\@BINARY_DIR\@/$config{BINARY_DIR}/;
+ $tmp =~ s/\@LIBRARY_DIR\@/$config{LIBRARY_DIR}/;
+ $tmp =~ s/\@MODULES\@/$modules/;
+ $tmp =~ s/\@STARTSCRIPT\@/$config{STARTSCRIPT}/;
+ $tmp =~ s/\@DESTINATION\@/$config{DESTINATION}/;
+ $tmp =~ s/\@EXTRA_DIR\@/$config{EXTRA_DIR}/;
+ $tmp =~ s/\@EXECUTABLE\@/$exe/;
+ $tmp =~ s/\@MAKEORDER\@/$config{MAKEORDER}/;
+ $tmp =~ s/\@VERSION\@/$version/;
+ $tmp =~ s/\@INSTALL_LIST\@/$install_list/;
+ $tmp =~ s/\@UNINSTALL_LIST\@/$uninstall_list/;
+
+ open(FILEHANDLE, ">$file");
+ print FILEHANDLE $tmp;
+ }
+ }
+ closedir(DIRHANDLE);
+
+ # Make inspircd executable!
+ chmod 0744, 'inspircd';
+}
+
+sub write_dynamic_modules_makefile {
+ # Modules Makefile..
+ print "Writing \033[1;32msrc/modules/Makefile\033[0m\n";
+ open(FILEHANDLE, ">src/modules/Makefile");
+
+###
+# Module Makefile Header
+###
+ print FILEHANDLE <<EOF;
+###################################################
+# Copyright 2002-2007 The InspIRCd Development Team
+# http://www.inspircd.org/wiki/index.php/Credits
+#
+# Thanks to Andrew Church <achurch\@achurch.org>
+# for assisting with making this work right.
+#
+# Automatically Generated by ./configure to add a
+# modules please run ./configure -modupdate
+###################################################
+
+all: \$(MODULES)
+
+EOF
+
+if ($config{OSNAME} =~ /darwin/) {
+ print FILEHANDLE <<EOCHEESE;
+
+PICLDFLAGS = -twolevel_namespace -undefined dynamic_lookup -bundle
+
+EOCHEESE
+} else {
+ print FILEHANDLE <<EOCHEESE;
+
+PICLDFLAGS = -fPIC -DPIC -shared
+
+EOCHEESE
+}
+
+ ###
+ # End Module Makefile Header
+ ###
+
+ # Create a Modules List..
+ my $modules = "";
+ my $cmflags = "";
+ my $liflags = "";
+ foreach $i (@modlist) {
+ ###
+ # Write Entry to the MakeFile
+ ###
+ $cmflags = getcompilerflags("src/modules/m_".$i.".cpp");
+ $liflags = getlinkerflags("src/modules/m_".$i.".cpp");
+ $deps = getdependencies("src/modules/m_".$i.".cpp");
+
+ #print "file: $i: cmflags=$cmflags; liflags=$liflags; deps=$deps\n";
+
+
+ $nicerflags = $config{FLAGS};
+ $nicerflags =~ s/-pedantic//g;
+
+ if (nopedantic("src/modules/m_".$i.".cpp"))
+ {
+ print FILEHANDLE "
+m_$i.so: m_$i.cpp ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h $deps
+ \$(CC) -pipe -I../../include $nicerflags $cmflags \$(PICLDFLAGS) $liflags -export-dynamic -o m_$i.so m_$i.cpp
+"
+ }
+ else
+ {
+ print FILEHANDLE "
+m_$i.so: m_$i.cpp ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h $deps
+ \$(CC) -pipe -I../../include \$(FLAGS) $cmflags \$(PICLDFLAGS) $liflags -export-dynamic -o m_$i.so m_$i.cpp
+";
+ }
+ $install_list = $install_list . " install -m \$(INSTMODE) src/modules/m_$i.so \$(MODPATH)\n";
+ $uninstall_list = $uninstall_list . " -rm \$(MODULES)/m_$i.so\n";
+###
+ # End Write Entry to the MakeFile
+ ###
+ }
+
+ opendir(DIRHANDLE, "src/modules");
+ foreach $name (sort readdir(DIRHANDLE)) {
+ if ($name =~ /^m_(.+?)$/) {
+ $mfrules = "";
+ $mobjs = "";
+ $mliflags = "";
+ $mfcount = 0;
+ # A module made of multiple files, in a dir, e.g. src/modules/m_spanningtree/
+ if (opendir(MDIRHANDLE, "src/modules/$name") != 0) {
+ read_module_directory("src/modules/$name", $name);
+ print "Composing Makefile rules for directory \033[1;32m$name\033[0m... (\033[1;32m$mfcount files found\033[0m)\n";
+ print FILEHANDLE "$name.so: ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h $mobjs\n";
+ if ($config{IS_DARWIN} eq "YES") {
+ print FILEHANDLE " \$(CC) -pipe -twolevel_namespace -undefined dynamic_lookup \$(FLAGS) $mliflags -bundle -o $name.so $mobjs\n";
+ } else {
+ print FILEHANDLE " \$(CC) -pipe \$(FLAGS) -shared $mliflags -o $name.so $mobjs\n";
+ }
+ print FILEHANDLE "\n$mfrules\n";
+ closedir(MDIRHANDLE);
+ $install_list = $install_list . " install -m \$(INSTMODE) src/modules/$name.so \$(MODPATH)\n";
+ }
+ }
+ }
+ closedir(DIRHANDLE);
+}
+
+sub read_module_directory {
+ my ($dpath, $reldpath) = @_;
+
+ if (opendir(MDIRHANDLE, $dpath) == 0) {
+ return;
+ }
+
+ foreach $fname (sort readdir(MDIRHANDLE)) {
+ if ($fname =~ /\.cpp$/) {
+ $cmflags = getcompilerflags("$dpath/$fname");
+ $mliflags = $mliflags . " " . getlinkerflags("$dpath/$fname");
+ $deps = getdependencies("$dpath/$fname");
+ $oname = $fname;
+ $oname =~ s/\.cpp$/.o/g;
+ $mfrules = $mfrules . "$reldpath/$oname: $reldpath/$fname ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h $deps\n";
+ $mfrules = $mfrules . " \$(CC) -pipe -I../../include -I. \$(FLAGS) $cmflags -export-dynamic -o $reldpath/$oname -c $reldpath/$fname\n\n";
+ $mobjs = $mobjs . " $reldpath/$oname";
+ $mfcount++;
+ }
+ elsif ((-d "$dpath/$fname") && !($fname eq ".") && !($fname eq "..")) {
+ read_module_directory($dpath."/".$fname, $reldpath."/".$fname);
+ }
+ }
+}
+
+sub calcdeps($)
+{
+ # Yes i know we could use gcc -M but it seems to ideneify a lot of 'deep'
+ # dependencies which are not relevent in C++.
+
+ my $file = $_[0];
+
+ open (CPP, "<$file") or die("Can't open $file for reading!");
+
+ my %dupe = ();
+ my $retlist = "";
+
+ foreach my $d (@ignoredeps)
+ {
+ $dupe{$d} = 1;
+ }
+
+ my $immutable = "";
+ foreach my $dep (@immutabledeps)
+ {
+ $immutable = $immutable . "../include/$dep ";
+ }
+ $immutable =~ s/ $//g;
+
+ while (chomp($line = <CPP>))
+ {
+ if ($line =~ /#include "(.+\.h)"/)
+ {
+ if (!exists($dupe{$1}))
+ {
+ $retlist = $retlist . "../include/$1 ";
+ $dupe{$1} = 1;
+ }
+ }
+ }
+ close CPP;
+ return length($immutable) ? $immutable . " " . $retlist : $retlist;
+}
+
+sub write_dynamic_makefile
+{
+ my $i = 0;
+ my @cmdlist = ();
+ my %existing_install_list = ();
+ opendir(DIRHANDLE, "src/commands");
+ foreach $name (sort readdir(DIRHANDLE))
+ {
+ if ($name =~ /^cmd_(.+)\.cpp$/)
+ {
+ $cmdlist[$i++] = $1;
+ $install_list = $install_list . " -install -m \$(INSTMODE) src/commands/cmd_" . $1 . ".so \$(LIBPATH)\n";
+ $uninstall_list = $uninstall_list . " -rm \$(LIBPATH)/cmd_$1.so\n";
+ }
+ }
+ closedir(DIRHANDLE);
+
+ if (!$has_epoll)
+ {
+ $config{USE_EPOLL} = 0;
+ }
+ if (!$has_kqueue)
+ {
+ $config{USE_KQUEUE} = 0;
+ }
+ if (!$has_ports)
+ {
+ $config{USE_PORTS} = 0;
+ }
+
+ foreach my $dir (("src","src/commands","src/modes","src/socketengines","src/modules"))
+ {
+ print "Scanning \033[1;32m$dir\033[0m for core files ";
+ opendir(DIRHANDLE, $dir);
+ foreach $name (sort readdir(DIRHANDLE))
+ {
+ if ($name =~ /\.cpp$/)
+ {
+ open (CPP, "<$dir/$name") or die("Can't open $dir/$name to scan it! oh bugger");
+ print ".";
+ while (chomp($line = <CPP>))
+ {
+ if ($line =~ /\/\* \$Core: (\w+) \*\//i)
+ {
+ $filelist{$name} = $1;
+ }
+ elsif ($line =~ /\/\* \$ExtraDeps: (.*?) \*\//i)
+ {
+ $specialdeps{$name} = $1;
+ }
+ elsif ($line =~ /\/\* \$ExtraObjects: (.*?) \*\//i)
+ {
+ $extraobjects{$name} = $1;
+ }
+ elsif ($line =~ /\/\* \$ExtraBuild: (.*?) \*\//i)
+ {
+ $extrabuildlines{$name} = $1;
+ }
+ elsif ($line =~ /\/\* \$ExtraSources: (.*?) \*\//i)
+ {
+ $extrasources{$name} = $1;
+ }
+ elsif ($line =~ /\/\* \$If: (\w+) \*\//i)
+ {
+ if (($config{$1} !~ /y/i) and ($config{$1} ne "1"))
+ {
+ # Skip to 'endif'
+ while (chomp($line = <CPP>))
+ {
+ die ("\$If buildsystem instruction within another \$If in file $dir/$name") if ($line =~ /\/\* \$If: (\w+) \*\//i);
+ last if ($line =~ /\/\* \$EndIf \*\//i);
+ }
+ }
+ }
+ elsif ($line =~ /\/\* \$Install: (.*?) \*\//i)
+ {
+ if (!exists($existing_install_list{$1}))
+ {
+ $existing_install_list{$1} = 1;
+ $idir = (split(' ',$1))[1];
+ $ifile = (split(' ',$1))[0];
+ $install_list = $install_list . " -install -m \$(INSTMODE) $1\n";
+ $ifile =~ s/.*\///g;
+ $uninstall_list = $uninstall_list . " -rm $idir/$ifile\n";
+ }
+ }
+ elsif ($line =~ /\/\* \$CopyInstall: (.*?) \*\//i)
+ {
+ if (!exists($existing_install_list{$1}))
+ {
+ $existing_install_list{$1} = 1;
+ $idir = (split(' ',$1))[1];
+ $ifile = (split(' ',$1))[0];
+ $install_list = $install_list . " -cp $1\n";
+ $ifile =~ s/.*\///g;
+ $uninstall_list = $uninstall_list . " -rm $idir/$ifile\n";
+ }
+ }
+ }
+ close CPP;
+ }
+ }
+ closedir(DIRHANDLE);
+ print " done!\n";
+ }
+
+ $freebsd4libs = $config{CRAQ};
+
+ my $all = "all: ";
+ $all_libsonly = "";
+
+ if ($config{IS_DARWIN} eq "YES")
+ {
+ $libraryext = "dylib";
+ $othercrap = " \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspircd.cpp\n \$(CC) -pipe -dynamic -bind_at_load -L. -o inspircd \$(LDLIBS) inspircd.o "
+ }
+ else
+ {
+ $libraryext = "so";
+ $RPATH = "-Wl,--rpath -Wl,$config{LIBRARY_DIR}" unless defined $opt_disablerpath;
+ $othercrap = " \$(CC) -pipe -I../include $RPATH \$(FLAGS) $freebsd4libs -rdynamic -L. inspircd.cpp -o inspircd \$(LDLIBS) ";
+ }
+
+ foreach my $cpp (sort keys %filelist)
+ {
+ $all = $all . $filelist{$cpp} . "." . $libraryext . " ";
+ $all_libsonly = $all_libsonly . $filelist{$cpp} . "." . $libraryext . " ";
+ $install_list = $install_list . " -install -m \$(INSTMODE) src/" . $filelist{$cpp} . "." . $libraryext . " \$(LIBPATH)\n";
+ $uninstall_list = $uninstall_list . " -rm \$(LIBPATH)/" . $filelist{$cpp} . "." . $libraryext . "\n";
+ }
+ $all = $all . "moo inspircd\n";
+
+ $othercrap = $othercrap . " $all_libsonly\n\n";
+
+ open(FH,">src/Makefile") or die("Could not write src/Makefile");
+ print FH <<EOM;
+
+CC = im a cheezeball
+CXXFLAGS = -I../include \${FLAGS}
+CPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* //' | grep -v svn)
+RELCPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* /modes\\//' | grep -v svn)
+
+EOM
+
+ print FH "$all\n\n";
+
+ $deps = calcdeps("src/inspircd.cpp");
+ print FH "inspircd: inspircd.cpp $deps $all_libsonly\n";
+ print FH "$othercrap\n";
+
+ foreach my $cpp (sort keys %filelist)
+ {
+ my $thislib = $filelist{$cpp} . "." . $libraryext;
+ my $objs = $cpp;
+ my $rawcpp = $cpp;
+ $objs =~ s/\.cpp$/.o/;
+ if (exists($extraobjects{$cpp}))
+ {
+ $objs = $objs . " " . $extraobjects{$cpp};
+ }
+ if (exists($extrasources{$cpp}))
+ {
+ $rawcpp = $rawcpp . " " . $extrasources{$cpp};
+ }
+ if ($config{IS_DARWIN} eq "YES")
+ {
+ $libcrap = "-install_name " . $config{LIBRARY_DIR} . "/" . $thislib . " -dynamiclib -twolevel_namespace -undefined dynamic_lookup";
+ }
+ else
+ {
+ if (defined $opt_disablerpath)
+ {
+ $libcrap = " -shared";
+ }
+ else
+ {
+ $libcrap = "-Wl,--rpath -Wl," . $config{LIBRARY_DIR} . " -shared";
+ }
+ }
+ $deps = calcdeps("src/$cpp");
+ if (exists($extrasources{$cpp}))
+ {
+ foreach my $seperate (sort split(' ',$extrasources{$cpp}))
+ {
+ $d = calcdeps("src/$extrasources{$cpp}") . " ";
+ if ($d ne "")
+ {
+ $deps = $deps . $d . " ";
+ }
+ }
+ }
+ print FH $thislib . ": $cpp $deps ". $specialdeps{$cpp} . "\n";
+ print FH " \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c $rawcpp\n";
+ if (exists($extrabuildlines{$cpp}))
+ {
+ print FH " " . $extrabuildlines{$cpp} . "\n";
+ }
+ print FH " \$(CC) -pipe $libcrap -o " . $thislib . " " . $objs . "\n\n";
+ }
+
+ print FH "moo:\n \${MAKE} -C \"commands\" DIRNAME=\"src/commands\" CC=\"\$(CC)\" \$(MAKEARGS)\n\n";
+
+ # close main makefile
+ close(FH);
+
+ # generate a list of .so
+ foreach my $cmd (@cmdlist) {
+ $cmdobjs = $cmdobjs . "cmd_$cmd.so ";
+ }
+
+ # and now reopen the commands makefile
+ open(FH,">src/commands/Makefile") or die("Could not write src/commands/Makefile");
+ print FH <<ITEM;
+CC = i am cornholio
+CXXFLAGS = -I../../include ${FLAGS}
+
+all: $cmdobjs
+
+
+ITEM
+
+ # now print the command file details.
+ foreach my $cmd (@cmdlist) {
+ print FH <<ITEM;
+cmd_$cmd.so: cmd_$cmd.cpp ../../include/base.h ../../include/modules.h ../../include/inspircd.h ../../include/channels.h ../../include/users.h ../../include/globals.h ../../include/inspircd_config.h ../../include/commands/cmd_$cmd.h
+ \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
+ \$(CC) -pipe $SHARED -o cmd_$cmd.so cmd_$cmd.o
+
+ITEM
+ }
+#try build a .so, no intermediate .o
+# \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic $SHARED -o cmd_$cmd.so
+
+#this works for sure
+# \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
+# \$(CC) -pipe $SHARED -o cmd_$cmd.so cmd_$cmd.o
+}
+