-Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
-Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
-STOP
- if ($rev eq "r0") {
- print " (Non-SVN build)";
- }
- print ".\n\n";
-
- $config{CHANGE_COMPILER} = "n";
- print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
-
- while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
- print "\e[1;32mIMPORTANT!\e[0m A GCC 2.x compiler has been detected, and
-should NOT be used. You should probably specify a newer compiler.\n\n";
- yesno('CHANGE_COMPILER',"Do you want to change the compiler?");
- if ($config{CHANGE_COMPILER} =~ /y/i) {
- print "What command do you want to use to invoke your compiler?\n";
- print "[\e[1;32m$config{CC}\e[0m] -> ";
- chomp($config{CC} = <STDIN>);
- if ($config{CC} eq "") {
- $config{CC} = "g++";
- }
- chomp(my $foo = `$config{CC} -dumpversion | cut -c 1`);
- if ($foo ne "") {
- chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
- chomp($config{GCCMINOR} = `$config{CC} -dumpversion | cut -c 3`);
- print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
- if ($config{GCCVER} < 3) {
- print "\e[1;32mGCC 2.x WILL NOT WORK!\e[0m. Let's try that again, shall we?\n";
- }
- }
- else {
- print "\e[1;32mWARNING!\e[0m Could not execute the compiler you specified. You may want to try again.\n";
- }
- }
- }
-
- print "\n";
-
- # Directory Settings..
- my $tmpbase = $config{BASE_DIR};
- dir_check("do you wish to install the InspIRCd base", "BASE_DIR");
- if ($tmpbase ne $config{BASE_DIR}) {
- $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Dir
- $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
- $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
- $config{LIBRARY_DIR} = resolve_directory($config{BASE_DIR}."/lib"); # Library Directory
- }
-
- dir_check("are the configuration files", "CONFIG_DIR");
- dir_check("are the modules to be compiled to", "MODULE_DIR");
- dir_check("is the IRCd binary to be placed", "BINARY_DIR");
- dir_check("are the IRCd libraries to be placed", "LIBRARY_DIR");
-
- my $chose_hiperf = 0;
- if ($has_kqueue) {
- yesno('USE_KQUEUE',"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
- print "\n";
- if ($config{USE_KQUEUE} eq "y") {
- $chose_hiperf = 1;
- }
- }
- if ($has_epoll) {
- yesno('USE_EPOLL',"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
- print "\n";
- if ($config{USE_EPOLL} eq "y") {
- $chose_hiperf = 1;
- }
- }
- if ($has_ports) {
- yesno('USE_PORTS',"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
- print "\n";
- if ($config{USE_PORTS} eq "y") {
- $chose_hiperf = 1;
- }
- }
-
- if (!$chose_hiperf) {
- yesno('USE_POLL', "Would you like to use poll?\n This is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?\n");
- if ($config{USE_POLL} ne "y")
- {
- print "No high-performance socket engines are available, or you chose\n";
- print "not to enable one. Defaulting to select() engine.\n\n";
- }
- }
-
- yesno('IPV6',"Would you like to build InspIRCd with IPv6 support?");
- print "\n";
-
- if ($config{IPV6} eq "y") {
- print "You have chosen to build an \e[1;32mIPV6-enabled\e[0m server.\nTo accept IPV4 users, you can still use IPV4 addresses\nin your port bindings..\n\n";
- $config{SUPPORT_IP6LINKS} = "y";
- } else {
- yesno('SUPPORT_IP6LINKS',"You have chosen to build an \e[1;32mIPV4-only\e[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers? If you are using a recent operating system and are\nunsure, answer yes. If you answer 'no' here, your InspIRCd server will\nbe unable to parse IPV6 addresses (e.g. for CIDR bans)\n\nEnable linking to servers which have IPV6 enabled?");
- print "\n";
- }
-
- $config{USE_FREEBSD_BASE_SSL} = "n";
- $config{USE_FREEBSD_PORTS_SSL} = "n";
- if ($config{HAS_OPENSSL_PORT} ne "")
- {
- $config{USE_FREEBSD_PORTS_SSL} = "y";
- print "I have detected the OpenSSL FreeBSD port installed on your system,\n";
- print "version \e[1;32m".$config{HAS_OPENSSL_PORT}."\e[0m. Your base system OpenSSL is version \e[1;32m".$openssl_ver."\e[0m.\n\n";
- yesno('USE_FREEBSD_PORTS_SSL', "Do you want to use the FreeBSD ports version?");
- print "\n";
- $config{USE_FREEBSD_BASE_SSL} = "y" if ($config{USE_FREEBSD_PORTS_SSL} eq "n");
-
- if ($config{USE_FREEBSD_BASE_SSL} eq "n")
- {
- # update to port version
- $openssl_ver = $config{HAS_OPENSSL_PORT};
- }
- }
- else
- {
- $config{USE_FREEBSD_BASE_SSL} = "y" if ($^O eq "freebsd");
- }
-
- $config{USE_SSL} = "n";
-
- if ($config{HAS_GNUTLS} eq "y" || $config{HAS_OPENSSL} eq "y")
- {
- print "Detected GnuTLS version: \e[1;32m" . $gnutls_ver . "\e[0m\n";
- print "Detected OpenSSL version: \e[1;32m" . $openssl_ver . "\e[0m\n\n";
-
- yesno('USE_SSL', "One or more SSL libraries detected. Would you like to enable SSL support?");
- if ($config{USE_SSL} eq "y")
- {
- if ($config{HAS_GNUTLS} eq "y")
- {
- yesno('USE_GNUTLS',"Would you like to enable SSL with m_ssl_gnutls? (recommended)");
- if ($config{USE_GNUTLS} eq "y")
- {
- print "\nUsing GnuTLS SSL module.\n";
- }
- }
-
- if ($config{HAS_OPENSSL} eq "y")
- {
- yesno('USE_OPENSSL', "Would you like to enable SSL with m_ssl_openssl?");
- if ($config{USE_OPENSSL} eq "y")
- {
- print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
- }
- }
- }
- }
- else
- {
- print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed if\n";
- print "you intend to use OpenSSL, or that GnuTLS is in your path if you intend\nto use GnuTLS.\n\n";
- }
-}
-
-dumphash();
-
-if (($config{USE_GNUTLS} eq "y") && ($config{HAS_GNUTLS} ne "y"))
-{
- print "Sorry, but i couldn't detect gnutls. Make sure gnutls-config is in your path.\n";
- exit(0);
-}
-if (($config{USE_OPENSSL} eq "y") && ($config{HAS_OPENSSL} ne "y"))
-{
- print "Sorry, but i couldn't detect openssl. Make sure openssl is in your path.\n";
- exit(0);
-}
-our $failed = 0;
-
-$config{CERTGEN} ||= 'y';
-yesno('CERTGEN',"Would you like generate SSL certificates now?") if ($interactive && ($config{USE_GNUTLS} eq "y" || $config{USE_OPENSSL} eq "y"));
-
-if ($config{USE_GNUTLS} eq "y") {
- unless (-r "src/modules/m_ssl_gnutls.cpp") {
- print "Symlinking src/modules/m_ssl_gnutls.cpp from extra/\n";
- symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!";
- }
- if ($interactive && $config{CERTGEN} eq 'y')
- {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL Certificates Not found, Generating.. \n\n
-*************************************************************
-* Generating the Private Key may take some time, go grab a *
-* Coffee. Even better, to generate some more entropy if it *
-* is taking a while, open another console and type du / a *
-* few times and get that HD going :) Then answer the *
-* Questions which follow. If you are unsure, just hit enter *
-*************************************************************\n\n";
- $failed = make_gnutls_cert();
- if ($failed) {
- print "\n\e[1;32mCertificate generation failed!\e[0m\n\n";
- } else {
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- print "Done.\n\n";
- }
- }
- else {
- print "SSL Certificates found, skipping.\n\n";
- }
- }
- else
- {
- print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
- }
-}
-
-if ($config{USE_OPENSSL} eq "y") {
- unless (-r "src/modules/m_ssl_openssl.cpp") {
- print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
- symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!";
- }
- $failed = 0;
- if ($interactive && $config{CERTGEN} eq 'y')
- {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL Certificates Not found, Generating.. \n\n
-*************************************************************
-* Generating the certificates may take some time, go grab a *
-* coffee, or something. *
-*************************************************************\n\n";
- make_openssl_cert();
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
- print "Done.\n\n";
- } else {
- print "SSL Certificates found, skipping.\n\n"
+# Parse --uid=123 or --uid=foo and extract the user id.
+my @user;
+if (defined $opt_uid) {
+ @user = $opt_uid =~ /^\d+$/ ? getpwuid($opt_uid) : getpwnam($opt_uid);
+ print_error "there is no '$opt_uid' user on this system!" unless @user;
+} else {
+ @user = $opt_system ? getpwnam('irc') : getpwuid($config{UID} || getuid());
+ print_error "you need to specify a user to run as using '--uid [id|name]'!" unless @user;
+}
+$config{USER} = $user[0];
+$config{UID} = $user[2];
+
+# Clear the screen.
+system 'tput', 'clear' if $interactive;
+
+# Check that the user actually wants this version.
+if ($version{LABEL} ne 'release' && $interactive) {
+ print_warning <<'EOW';
+You are building a development version. This contains code which has
+not been tested as heavily and may contain various faults which could seriously
+affect the running of your server. It is recommended that you use a stable
+version instead.
+
+You can obtain the latest stable version from http://www.inspircd.org/ or by
+running `git checkout insp20` if you are installing from Git.
+
+EOW
+exit 1 unless prompt_bool $interactive, 'I understand this warning and want to continue anyway.', !$interactive;
+}
+
+# Configure directory settings.
+my $question = <<"EOQ";
+Currently, InspIRCd is configured with the following paths:
+
+<|BOLD Base:|> $config{BASE_DIR}
+<|BOLD Binary:|> $config{BINARY_DIR}
+<|BOLD Config:|> $config{CONFIG_DIR}
+<|BOLD Data:|> $config{DATA_DIR}
+<|BOLD Log:|> $config{LOG_DIR}
+<|BOLD Manual:|> $config{MANUAL_DIR}
+<|BOLD Module:|> $config{MODULE_DIR}
+
+Do you want to change these settings?
+EOQ
+if (prompt_bool $interactive, $question, 0) {
+ my $original_base_dir = $config{BASE_DIR};
+ $config{BASE_DIR} = prompt_dir $interactive, 'In what directory do you wish to install the InspIRCd base?', $config{BASE_DIR};
+ foreach my $key (qw(BINARY_DIR CONFIG_DIR DATA_DIR LOG_DIR MANUAL_DIR MODULE_DIR)) {
+ $config{$key} =~ s/^\Q$original_base_dir\E/$config{BASE_DIR}/;
+ }
+ $config{BINARY_DIR} = prompt_dir $interactive, 'In what directory should the InspIRCd binary be placed?', $config{BINARY_DIR};
+ $config{CONFIG_DIR} = prompt_dir $interactive, 'In what directory are configuration files to be stored?', $config{CONFIG_DIR};
+ $config{DATA_DIR} = prompt_dir $interactive, 'In what directory are variable data files to be stored?', $config{DATA_DIR};
+ $config{LOG_DIR} = prompt_dir $interactive, 'In what directory are log files to be stored?', $config{LOG_DIR};
+ $config{MANUAL_DIR} = prompt_dir $interactive, 'In what directory are manual pages to be placed?', $config{MANUAL_DIR};
+ $config{MODULE_DIR} = prompt_dir $interactive, 'In what directory are modules to be placed?', $config{MODULE_DIR};
+}
+
+# Configure module settings.
+$question = <<'EOQ';
+Currently, InspIRCd is configured to automatically enable all available extra modules.
+
+Would you like to enable extra modules manually?
+EOQ
+if (prompt_bool $interactive, $question, 0) {
+ foreach my $extra (<src/modules/extra/m_*.cpp>) {
+ my $module_name = basename $extra, '.cpp';
+ if (prompt_bool $interactive, "Would you like to enable $module_name?", 0) {
+ enable_extras "$module_name.cpp";