-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No nicks module: Adds the +N channel mode
-#<module name="m_nonicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No Notice module: adds the channel mode +T
-#<module name="m_nonotice.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper channels mode: Adds the +O channel mode
-#<module name="m_operchans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper Join module: Forces opers to join a channel on oper-up
-#<module name="m_operjoin.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you are using the m_operjoin.so module, specify the channel here #
-# #
-#<operjoin channel="#channel">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MOTD module: Provides support for seperate message of the day
-# on oper-up
-#<module name="m_opermotd.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you are using the m_opermotd.so module, specify the motd here #
-# #
-#<opermotd file="oper.motd">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Override module: Adds support for oper override
-#<module name="m_override.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_override.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/Oper_Override_Module #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper levels module: Gives each oper a level and prevents
-# actions being taken against higher level opers
-# Specify the level as the 'level' parameter of the <type> tag
-#<module name="m_operlevels.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper modes module: Allows you to specify modes to add/remove on oper
-# Specify the modes as the 'modes' parameter of the <type> tag
-# and/or as the 'modes' parameter of the <oper> tag.
-#<module name="m_opermodes.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper password hash module: Allows hashed oper passwords
-# Relies on the module m_md5.so and/or m_sha256.so being loaded before
-# m_password_hash.so in the configuration file.
-#<module name="m_password_hash.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# To use this module, you must define a hash type for each oper's
-# password you want to hash. For example:
-#
-# <oper name="Brain"
-# host="ident@dialup15.isp.com"
-# hash="sha256"
-# password="a41d730937a53b79f788c0ab13e9e1d5"
-# type="NetAdmin">
-#
-# The types of hashing available vary depending on which hashing modules
-# you load, but usually if you load m_sha256.so and m_md5.so, both md5
-# and sha256 type hashing will be available (the most secure of which
-# is SHA256).
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# PostgreSQL module: Allows other SQL modules to access PgSQL databases
-# through a unified API. You must copy the source for this module
-# from the directory src/modules/extra, plus the file m_sqlv2.h
-#<module name="m_pgsql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_pgsql.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
-#
-#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Random Quote module: provides a random quote on connect.
-# NOTE: Some of these may mimic fatal errors and confuse users and
-# opers alike! - BEWARE!
-#<module name="m_randquote.so">
-#
-#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify to use the m_randquote.so module, then #
-# specify below the path to the randquotes.conf file. #
-# #
-#<randquote file="randquotes.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Redirect module: Adds channel redirection (mode +L)
-#<module name="m_redirect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Registered users only channel creation
-# Allows only registered users and opers to create new channels.
-#<module name="m_regonlycreate.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Remove module: Adds the /REMOVE command which is a peaceful
-# alternative to /KICK
-#<module name="m_remove.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict banned users module:
-# Disallows banned users on a channel from messaging the channel,
-# changing nick, or changing the topic, if loaded.
-#<module name="m_restrictbanned.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels
-#<module name="m_restrictchans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers
-#<module name="m_restrictmsg.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Provide /LIST throttling (to prevent flooding) and /LIST safety to
-# prevent excess flood when the list is large.
-#<module name="m_safelist.so">
-#
-#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# When using Safelist, you may set the following values;
-#
-# The first value, 'throttle', sets the amount of time in seconds a user
-# must wait between LIST commands. For example, if this is set to 60
-# (the default) then the user may not /LIST more than once a minute.
-# If not defined, the default value is 60 seconds.
-#
-# The second value, 'maxlisters', indicates the maximum number of users
-# which may be retrieving a LIST at once. It is not recommended you raise
-# this value, as increasing it too high can make your network vulnerable
-# to floodbots which waste your bandwidth and CPU time with LIST requests.
-#
-#<safelist throttle="60" maxlisters="50">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAJOIN module: Adds the /SAJOIN command
-#<module name="m_sajoin.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAMODE module: Adds the oper /SAMODE command
-#<module name="m_samode.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SANICK module: Allows opers to change user's nicks
-#<module name="m_sanick.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAPART module: Adds the oper /SAPART command
-#<module name="m_sapart.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
-#<module name="m_saquit.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Secure list module: Prevent /LIST in the first minute of connection,
-# crippling most spambots and trojan spreader bots.
-#<module name="m_securelist.so">
-#
-#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Securelist can be harmful to some irc search engines such as #
-# netsplit.de and searchirc.com. To prevent securelist blocking these #
-# sites from listing, define exception tags as shown below: #
-<securehost exception="*@*.searchirc.org">
-<securehost exception="*@*.netsplit.de">
-<securehost exception="*@echo940.server4you.de">
-# #
-# Define the following variable to change how long a user must wait #
-# before issuing a LIST. If not defined, defaults to 60 seconds. #
-# #
-#<securelist waittime="60"> #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# See nicks module: Allow for SNOMASK +N which shows nick changes.
-#<module name="m_seenicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Set Idle module: Adds a command for opers to change their
-# idle time (mainly a toy)
-#<module name="m_setidle.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Services support module: Adds several usermodes such as +R and +M
-# this module implements the 'identified' state via user mode +r, which
-# is similar to the DALnet and dreamforge systems.
-#
-# N O T E!!
-# >> This CAN NOT be used at the same time as m_services_account <<
-# N O T E!!
-#<module name="m_services.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Services support module: Adds several usermodes such as +R and +M
-# this module implements the 'identified' state via account names (AC)
-# and is similar in operation to the way asuka and ircu handle services.
-#
-# N O T E!!
-# >> This CAN NOT be used at the same time as m_services <<
-# N O T E!!
-#<module name="m_services_account.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Sethost module: Adds the /SETHOST command
-# See m_chghost for how to customise valid chars for hostnames
-#<module name="m_sethost.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Setident module: Adds the /SETIDENT command
-#<module name="m_setident.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SETNAME module: Adds the /SETNAME command
-#<module name="m_setname.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Show Whois module: Adds the +W usermode which allows opers
-# to see when they are whois'ed (can be annoying).
-#<module name="m_showwhois.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Spy module: Adds the commands SPYLIST and SPYNAMES that let opers
-# see who is in a +s channel, and list +s channels, show keys of keyed
-# channels the oper is not a member of etc. Like most standard 'abusive'
-# features of many other ircds, this is modular in InspIRCd.
-#<module name="m_spy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL channel mode module: Adds support for SSL-only channels (+z).
-# does not do anything useful without a working SSL module (see below)
-#<module name="m_sslmodes.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Dummy ssl module: If you have other servers on your network which
-# have SSL, but your server does not have ssl enabled, you should load
-# this module, which will handle SSL metadata (e.g. the "Is using ssl"
-# field in the WHOIS information).
-#<module name="m_ssl_dummy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
-#<module name="m_ssl_gnutls.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
-# #
-# NOTE: If you want to use this module to encrypt and sign your #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file! #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Info module: Allows users to retrieve information about other
-# user's peer SSL certificates and keys. This can be used by client
-# scripts to validate users. For this to work, one of m_ssl_gnutls.so
-# or m_ssl_openssl.so must be loaded. You must symlink the source for
-# this module from the directory src/modules/extra.
-#<module name="m_sslinfo.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
-#<module name="m_ssl_openssl.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_ssl_openssl.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
-# #
-# NOTE: If you want to use this module to encrypt and sign your #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file! #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
-# stored within their SSL certificate and key pair.
-# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
-# be loaded. An extra value should be added to enabled opers, which
-# is in the following format: fingerprint="<hash>". For more information,
-# see the example in the oper blocks.
-#<module name="m_ssl_oper_cert.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Strip colour module: Adds the channel mode +S
-#<module name="m_stripcolor.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SILENCE module: Adds support for /SILENCE
-#<module name="m_silence.so">
-#
-# Configuration tags:
-#
-#<silence maxentries="32">
-#
-# Sets the maximum number of entries on a users silence list.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Extended SILENCE module: Adds support for /SILENCE with additional
-# features to silence based on invites, channel messages, etc.
-#<module name="m_silence_ext.so">
-#
-# The configuration tags for this module are identical to those of
-# m_silence, shown above.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQLite3 module: Allows other SQL modules to access SQLite3 #
-# databases through a unified API. You must link the source for this #
-# module from the directory src/modules/extra to src/modules, plus #
-# the file m_sqlv2.h #
-#<module name="m_sqlite3.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_sqlite.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
-#
-#<database hostname="/full/path/to/database.db" id="anytext">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQLutils module: Provides some utilities to SQL client modules, such
-# as mapping queries to users and channels. You must copy the source
-# for this module from the directory src/modules/extra/m_sqlutils.cpp
-# and src/modules/extra/m_sqlutils.h into /src/modules
-# Needed for, and loaded before: SQLauth and SQLoper
-#<module name="m_sqlutils.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL authentication module: Allows IRCd connections to be tied into
-# a database table (for example a forum). You must copy the source for
-# this module from the directory src/modules/extra
-# Depends on the SQLutils module being loaded first.
-#<module name="m_sqlauth.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_sqlauth.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/SQL_Authentication_Module #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL logging module: Allows you to log network-wide data for your
-# network in a fully normalised set of SQL tables. You must copy the
-# source for this module from the directory src/modules/extra
-#<module name="m_sqllog.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# dbid - Database ID to use (see m_sql) #
-# #
-# See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
-# #
-#<sqllog dbid="1">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL oper module: Allows you to store oper credentials in an SQL table
-# You must copy the source for this module from the directory src/modules/extra
-# Depends on the SQLutils module being loaded first.
-#<module name="m_sqloper.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# dbid - Database ID to use (see m_sql) #
-# #
-# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
-# #
-#<sqloper dbid="1">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
-# added/removed by Services. #
-#<module name="m_svshold.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
-#<module name="m_swhois.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Taxonomy module: Adds the /TAXONOMY command, used to view all
-# metadata attached to a user.
-#<module name="m_taxonomy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test command module: Does nothing significant. Read: pointless.
-#<module name="m_testcommand.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Timed bans module: Adds timed bans and the /TBAN command
-#<module name="m_timedbans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test line module: Adds the /TLINE command, used to test how many
-# users a /GLINE or /ZLINE etc would match.
-#<module name="m_tline.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# UHNAMES support module: Adds support for the IRCX style UHNAMES
-# extension, which displays ident and hostname in the names list for
-# each user, saving clients from doing a WHO on the channel. Note that
-# this module is not widely supported yet. If a client does not support
-# UHNAMES it will not enable it, this will not break incompatible
-# clients.
-#<module name="m_uhnames.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Uninvite module: Adds the /UNINVITE command which lets users remove
-# pending invites from channels without waiting for the user to join.
-#<module name="m_uninvite.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Userip module: Adds the /USERIP command
-#<module name="m_userip.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Vhost module: Adds the VHOST command which allows for adding virtual
-# hosts which are accessible using a username and password in the config.
-#<module name="m_vhost.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# user - Username for the vhost. #