-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Auditorium module: Adds channel mode +u which makes everyone else
-# except you in the channel invisible, used for large meetings etc.
-#<module name="m_auditorium.so">
-#
-# Auditorium settings:
-#
-#<auditorium showops="no">
-#
-# Setting this value to yes makes m_auditorium behave like unrealircd
-# +u channel mode, e.g. ops see users joining, parting, etc, and users
-# joining the channel see the ops. Without this flag, the mode acts
-# like ircnet's +a (anonymous channels), showing only the user in the
-# names list, and not even showing the ops in the list, or showing the
-# ops that the user has joined.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban except module: Adds support for channel ban exceptions (+e)
-#<module name="m_banexception.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban redirection module: Allows bans which redirect to a specified
-# channel. e.g. +b nick!ident@host#channelbanneduserissentto
-#<module name="m_banredirect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block amsg module: Attempt to block all usage of /amsg and /ame
-#<module name="m_blockamsg.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you have the m_blockamsg.so module loaded, you can configure it #
-# with the <blockamsg> tag: #
-# #
-# delay - How many seconds between two messages to force #
-# them to be recognised as unrelated. #
-# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
-# or 'killopers'. Define how to take action when #
-# a user uses /amsg or /ame. #
-#
-#<blockamsg delay="3" action="killopers">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block CAPS module: Blocking all-CAPS messages with cmode +P
-#<module name="m_blockcaps.so">
-# #
-#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# percent - How many percent of text must be caps before text #
-# will be blocked. #
-# #
-# minlen - The minimum length a line must be for the block #
-# percent to have any effect. #
-# #
-# capsmap - A list of chars to be considered CAPS, this was #
-# you can add CAPS for your language. Also you can #
-# add things like ! and space to further lock down #
-# on caps usage. #
-#<blockcaps percent="50"
-# minlen="5"
-# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block colour module: Blocking colour-coded messages with cmode +c
-#<module name="m_blockcolor.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Botmode module: Adds the user mode +B
-#<module name="m_botmode.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CBAN module: Lets you disallow channels from being used at runtime.
-#<module name="m_cban.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Censor module: Adds the channel mode +G
-#<module name="m_censor.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify to use the m_censor module, then you must #
-# specify some censor tags. See also: #
-# http://www.inspircd.org/wiki/Censor_Module #
-#
-#<include file="censor.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-#<module name="m_cgiirc.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# Optional - If you specify to use m_cgiirc, then you must specify one
-# or more cgihost tags which indicate authorized CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module
-#
-# Set to yes if you want to notice opers when CGI clients connect
-# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS
-# <cgihost type="webirc" mask="somebox.mysite.com"> # Get IP from WEBIRC
-# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel create module: Adds snomask +j, which will notify opers of
-# any new channels that are created
-#<module name="m_chancreate.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel filter module: Allows channel-op defined message
-# filtering using simple string matches (channel mode +g)
-#<module name="m_chanfilter.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Chanprotect module: gives +q and +a channel modes
-#<module name="m_chanprotect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CHGHOST module: Adds the /CHGHOST command
-#<module name="m_chghost.so">
-#
-#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
-# Optional - If you want to use special chars for hostnames you can #
-# specify your own custom list of chars with the <hostname> tag: #
-# #
-# charmap - A list of chars accepted as valid by the /CHGHOST #
-# and /SETHOST commands. Also note that the list is #
-# case-sensitive. #
-#<hostname charmap="abcdefghijklmnopqrstuvwxyz.-_/0123456789">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CHGIDENT module: Adds the /CHGIDENT command
-#<module name="m_chgident.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Cloaking module: Adds usermode +x and cloaking support.
-# Relies on the module m_md5.so being loaded before m_cloaking.so in
-# the configuration file.
-#<module name="m_cloaking.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify the m_cloaking.so module as above, you #
-# must define cloak keys, and optionally a cloak prefix as shown #
-# below. When using cloaking, the cloak keys are MANDITORY and must #
-# be included. However, if prefix is not included, it will default #
-# to your networks name from the <server> tag. #
-# #
-# <cloak key1="0x2AF39F40" #
-# key2="0x78E10B32" #
-# key3="0x4F2D2E82" #
-# key4="0x043A4C81" #
-# prefix="mynet"> #
-# #
-# Please note that the key values will accept any number, and should #
-# be large numbers. Using small numbers such as "7" or "1924" will #
-# seriously weaken the security of your cloak. It is recommended you #
-# use hexdecimal numbers prefixed by "0x", as shown in this example, #
-# with each key eight hex digits long. #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Clones module: Adds an oper command /CLONES for detecting cloned
-# users. Warning: This module may be resource intensive when its
-# command is issued, use with care.
-#<module name="m_clones.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Join: Allows you to force users to join one or more channels
-# automatically upon connecting to the server.
-#<module name="m_conn_join.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#
-# If you have m_conn_join.so loaded, you can configure it using the
-# follow values:
-#
-#<autojoin channel="#one,#two,#three">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Lusers: Shows the LUSERS output on connect
-#<module name="m_conn_lusers.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Usermodes: Set modes on users when they connect
-# When this module is loaded <connect:allow> tags may have an optional
-# modes="" value, which contains modes to add or remove from users
-# when they connect to the server.
-#<module name="m_conn_umodes.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Wait-for-Pong: Don't let a user connect until they PONG
-#<module name="m_conn_waitpong.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you have the m_conn_waitpong.so module loaded, configure it with #
-# the <waitpong> tag: #
-# #
-# sendsnotice - Whether to send a snotice on connect, like other #
-# older ircds #
-# #
-# killonbadreply - Whether to kill the user if they send the wrong #
-# PONG reply. #
-# #
-#<waitpong sendsnotice="yes" killonbadreply="yes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connection throttle module. Configuration:
-#<module name="m_connflood.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# seconds, maxconns - Amount of connections per <seconds>.
-#
-# timeout - Time to wait after the throttle was activated
-# before deactivating it. Be aware that the time
-# is seconds + timeout.
-#
-# quitmsg - The message that users get if they attempt to
-# connect while the throttle is active.
-#
-# bootwait - Amount of time to wait before enforcing the
-# throttling when the server just booted.
-#
-#<connflood seconds="30" maxconns="3" timeout="30"
-# quitmsg="Throttled" bootwait="10">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# DCCALLOW module: Adds the /DCCALLOW command
-#<module name="m_dccallow.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# blockchat - Whether to block DCC CHAT as well as DCC SEND
-# length - Default duration of entries in DCCALLOW list
-# action - Default action to take if no action is specified
-# can be 'block' or 'allow'
-#
-# File configuration:
-# pattern - The glob pattern to match against
-# action - Action to take if a user attempts to send a file
-# that matches this pattern, can be 'block' or 'allow'
-#
-#<dccallow blockchat="yes" length="5m" action="block">
-#<banfile pattern="*.exe" action="block">
-#<banfile pattern="*.txt" action="allow">
-#
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Deaf module: adds support for ircu style usermode +d - deaf to
-# channel messages and channel notices.
-#<module name="m_deaf.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Deny Channels: Deny Channels from being used by users
-#<module name="m_denychans.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you have the m_denychans.so module loaded, you need to specify #
-# the channels to deny: #
-# #
-# name - The channel name to deny. #
-# #
-# allowopers - If operators are allowed to override the deny. #
-# #
-# reason - Reason given for the deny. #
-# #
-#<badchan name="#gods" allowopers="yes" reason="Tortoises!">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Devoice Module: Let users devoice themselves.
-#<module name="m_devoice.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# DNS Blacklist Module: Provides support for looking up IPs on one or #
-# more blacklists. #
-#<module name="m_dnsbl.so"> #
-# #
-# For configuration options please see the wiki page for m_dnsbl at #
-# http://inspircd.org/wiki/DNS_Blacklist_Module #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Filter module: Provides glob-based message filtering
-#<module name="m_filter.so">
-# OR
-# PCRE filter module: Filters messages using regular expressions
-#<module name="m_filter_pcre.so">
-#
-# You may only use one or the other with these modules, network-wide.
-#
-#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify to use the m_filter or m_filter_pcre #
-# modules, then specfiy below the path to the filter.conf file, #
-# or define some <filter> tags. #
-# #
-#<include file="filter.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Foobar module: does nothing - historical relic
-#<module name="m_foobar.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Globops module: gives /GLOBOPS and usermode +g
-#<module name="m_globops.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Global load module: Allows loading and unloading of modules network-
-# wide (USE WITH EXTREME CAUTION!)
-#<module name="m_globalload.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HELPOP module: Provides the /HELPOP command
-#<module name="m_helpop.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify to use the m_helpop.so module, then #
-# specify below the path to the helpop.conf file, or if you like to #
-# make a mess, define your helpop tags in this conf. #
-# #
-#<include file="helpop.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HIDECHANS module: Allows opers to hide their channels list from non-
-# opers by setting user mode +I on themselves.
-# <module name="m_hidechans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HIDEOPER module: Allows opers to hide their oper status from non-
-# opers by setting user mode +H on themselves.
-# <module name="m_hideoper.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Hostchange module: Allows a different style of cloaking
-#<module name="m_hostchange.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you choose to use the m_hostchange.so module. #
-# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
-# #
-#<host suffix="polarbears.org">
-#<hostchange mask="*@fbi.gov" action="addnick">
-#<hostchange mask="*r00t@*" action="suffix">
-#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# httpd module: Provides http server support for InspIRCd
-#<module name="m_httpd.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#
-# Optional - If you choose to use the m_httpd.so module, then you must
-# specify the port number and other details of your http server:
-#
-#<http ip="192.168.1.10" host="brainwave" port="32006"
-# index="/home/brain/inspircd/http/index.html">
-#
-# You may have as many of these tags as you wish, each with a different
-# IP, port, host or index file. Each one will act as an independent
-# HTTP server.
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# http stats module: Provides basic stats pages over HTTP
-# Requires m_httpd.so to be loaded for it to function.
-#<module name="m_httpd_stats.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-#
-#<httpstats stylesheet="http://remote.style/sheet.css">
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ident: Provides RFC 1413 ident lookup support
-#<module name="m_ident.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you are using the m_ident.so module, then you can #
-# specify the timeout for ident lookups here. If not defined, it will #
-# default to one second. This is a non-blocking timeout which holds #
-# the user in a 'connecting' state until the lookup is complete. #
-# #
-#<ident timeout="5">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Invite except module: Adds support for channel invite exceptions (+I)
-#<module name="m_inviteexception.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Invisible module - Adds support for usermode +Q (quiet) which lets an
-# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
-# opers are still able to see invisible users, and if an oper with +Q
-# deopers, they will become visible.
-#
-# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you
-# must first add the value canquiet="yes" to that oper's type tag.
-#
-#<module name="m_invisible.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Join flood module: Adds support for join flood protection (+j)
-#<module name="m_joinflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Jump Server module: Adds support for the RPL_REDIR numeric
-#<module name="m_jumpserver.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
-#<module name="m_kicknorejoin.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Knock module: adds the /KNOCK command and +K channel mode
-#<module name="m_knock.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
-# used to temporarily close/open for new connections to the server. #
-# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
-# are specified in a <class> tag that the oper is part of. This is so #
-# you can control who has access to this possible dangerous command. #
-# If your server is locked and you got disconnected, do a REHASH from #
-# shell to open up again.
-#<module name="m_lockserv.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Msg flood module: Adds message/notice flood protection (+f)
-#<module name="m_messageflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MySQL module: Allows other SQL modules to access MySQL databases
-# through a unified API. You must copy the source for this module
-# from the directory src/modules/extra, plus the file m_sqlv2.h
-#<module name="m_mysql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_mysql.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
-#
-#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# NAMESX module: Provides support for the NAMESX extension which allows
-# clients to see all the prefixes set on a user without getting confused.
-# This is supported by mIRC, x-chat, klient, and maybe more.
-#<module name="m_namesx.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Nicklock module: Let opers change a user's nick and then stop that
-# user from changing their nick again.
-#<module name="m_nicklock.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No ctcp module: Adds the channel mode +C to block CTCPs
-#<module name="m_noctcp.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Noinvite module: Gives channel mode +V
-#<module name="m_noinvite.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No kicks module: Adds the +Q channel mode
-#<module name="m_nokicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No nicks module: Adds the +N channel mode
-#<module name="m_nonicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No Notice module: adds the channel mode +T
-#<module name="m_nonotice.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper channels mode: Adds the +O channel mode
-#<module name="m_operchans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper hash module: Allows hashed oper passwords
-# Relies on the module m_md5.so and/or m_sha256.so being loaded before
-# m_oper_hash.so in the configuration file.
-#<module name="m_oper_hash.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# To use this module, you must define a hash type for each oper's
-# password you want to hash. For example:
-#
-# <oper name="Brain"
-# host="ident@dialup15.isp.com"
-# hash="sha256"
-# password="a41d730937a53b79f788c0ab13e9e1d5"
-# type="NetAdmin">
-#
-# The types of hashing available vary depending on which hashing modules
-# you load, but usually if you load m_sha256.so and m_md5.so, both md5
-# and sha256 type hashing will be available (the most secure of which
-# is SHA256).
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper Join module: Forces opers to join a channel on oper-up
-#<module name="m_operjoin.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you are using the m_operjoin.so module, specify the channel here #
-# #
-#<operjoin channel="#channel">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MOTD module: Provides support for seperate message of the day
-# on oper-up
-#<module name="m_opermotd.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you are using the m_opermotd.so module, specify the motd here #
-# #
-#<opermotd file="oper.motd">