-echo "# Insp Main Makefile" > Makefile
-echo "#" >> Makefile
-echo "# (C) ChatSpike development team" >> Makefile
-echo "#####" >> Makefile
-echo "# MAKEFILE DYNAMICLY GENERATED BY ./configure" >> Makefile
-echo "# DO NOT MODIFY UNLESS YOU KNOW WHAT YOU ARE DOING!" >> Makefile
-echo "#####" >> Makefile
-echo "# Original Makefile & ./configure by <Craig@ChatSpike.net>" >> Makefile
-echo "# Small modifications by <brain@ChatSpike.net>" >> Makefile
-echo "#" >>Makefile
-echo ""
-echo "CC = g++" >> Makefile
-echo "PROGS = inspircd" >> Makefile
-echo "FLAGS = $FLAGS" >> Makefile
-echo "LDLIBS = $LDLIBS" >> Makefile
-echo "CONPATH = $CONFIG_DIR" >> Makefile
-echo "MODPATH = $MODULE_DIR" >> Makefile
-echo "BINPATH = $BINARY_DIR" >> Makefile
-echo "MODULES =$MODULES" >> Makefile
-echo "MAKEARGS = 'PROGS=\${PROGS}' 'FLAGS=\${FLAGS}' 'CC=\${CC}' 'LDLIBS=\${LDLIBS}' 'MODULES=\${MODULES}'" >> Makefile
-echo "" >> Makefile
-echo "all : ircd mods config" >> Makefile
-echo "" >> Makefile
-echo "mods:" >> Makefile
-echo " make -C src/modules DIRNAME="src/modules" \$(MAKEARGS)" >> Makefile
-echo " mv src/modules/*.so \$(MODPATH)" >> Makefile
-echo "" >> Makefile
-echo "ircd:" >> Makefile
-echo " make -C src DIRNAME="src" \$(MAKEARGS)" >> Makefile
-echo " cp src/inspircd \$(BINPATH)" >> Makefile
-echo "" >> Makefile
-echo "config:" >> Makefile
-echo " cp conf/* \$(CONPATH)" >> Makefile
-echo "clean:" >> Makefile
-echo " rm -rf src/*.o" >> Makefile
-echo " rm -rf src/modules/*.o" >> Makefile
-echo "" >> Makefile
-echo "modclean:" >> Makefile
-echo " rm -rf modules/*.so" >> Makefile
-echo "" >> Makefile
-echo "squeakyclean: modclean clean" >> Makefile
+# InspIRCd Main Makefile
+#
+# (C) InspIRCd Development Team, 2002-2009
+# This file is automagically generated by configure, from
+# .Makefile.inc. Any changes make will go away!
+# Please do not edit unless you know what you're doing.
+#
+
+CC = @CC@
+SYSTEM = @SYSTEM@
+BUILDPATH = @BUILD_DIR@
+SOCKETENGINE = @SOCKETENGINE@
+CXXFLAGS += -pipe -fPIC -DPIC
+LDLIBS = -pthread -lstdc++
+LDFLAGS =
+SHARED = -shared -rdynamic
+CORELDFLAGS = -rdynamic -L. $(LDFLAGS)
+PICLDFLAGS = -fPIC -shared -rdynamic $(LDFLAGS)
+BASE = "@BASE_DIR@"
+CONPATH = "@CONFIG_DIR@"
+MODPATH = "@MODULE_DIR@"
+BINPATH = "@BINARY_DIR@"
+LAUNCHDPATH = "/System/Library/LaunchDaemons"
+INSTMODE = 0755
+
+@IFEQ $(CC) icc
+ CXXFLAGS += -Wshadow
+@ELSE
+ CXXFLAGS += -pedantic -Woverloaded-virtual -Wshadow -Wformat=2 -Wmissing-format-attribute -Wall
+@ENDIF
+
+
+@IFEQ $(SYSTEM) linux
+ LDLIBS += -ldl
+@ELSIFEQ $(SYSTEM) solaris
+ LDLIBS += -lsocket -lnsl -lrt -lresolv
+@ELSIFEQ $(SYSTEM) sunos
+ LDLIBS += -lsocket -lnsl -lrt -lresolv
+@ELSIFEQ $(SYSTEM) darwin
+ CXXFLAGS += -DDARWIN -frtti
+ LDLIBS += -ldl
+ SHARED = -bundle -twolevel_namespace -undefined dynamic_lookup
+ CORELDFLAGS = -dynamic -bind_at_load -L.
+@ELSIFEQ $(SYSTEM) interix
+ CXXFLAGS += -D_ALL_SOURCE -I/usr/local/include
+@ENDIF
+
+@IFDEF D
+ CXXFLAGS += -g3 -Werror
+ HEADER = debug-header
+@ELSE
+ CXXFLAGS += -g1
+ HEADER = std-header
+@ENDIF
+FOOTER = finishmessage
+
+CXXFLAGS += -Iinclude
+
+@GNU_ONLY MAKEFLAGS += --no-print-directory
+
+@GNU_ONLY SOURCEPATH = $(shell /bin/pwd)
+@BSD_ONLY SOURCEPATH != /bin/pwd
+
+@IFDEF V
+ RUNCC = $(CC)
+ VERBOSE = -v
+@ELSE
+ @GNU_ONLY MAKEFLAGS += --silent
+ @BSD_ONLY MAKE += -s
+ RUNCC = perl $(SOURCEPATH)/make/run-cc.pl $(CC)
+@ENDIF
+
+@DO_EXPORT RUNCC CXXFLAGS CC LDLIBS PICLDFLAGS VERBOSE SOCKETENGINE CORELDFLAGS
+@DO_EXPORT BASE CONPATH MODPATH BINPATH SOURCEPATH BUILDPATH
+
+# Default target
+TARGET = all
+
+@IFDEF M
+ HEADER = mod-header
+ FOOTER = mod-footer
+ @BSD_ONLY TARGET = modules/${M:S/.so$//}.so
+ @GNU_ONLY TARGET = modules/$(M:.so=).so
+@ENDIF
+
+@IFDEF T
+ HEADER =
+ FOOTER = target
+ TARGET = $(T)
+@ENDIF
+
+all: $(FOOTER)
+
+target: $(HEADER)
+ $(MAKEENV) perl make/calcdep.pl
+ $(MAKEENV) $(MAKE) -C $(BUILDPATH) -f real.mk $(TARGET)
+
+debug:
+ @${MAKE} D=1 all
+
+debug-header:
+ @echo "*************************************"
+ @echo "* BUILDING WITH DEBUG SYMBOLS *"
+ @echo "* *"
+ @echo "* This will take a *long* time. *"
+ @echo "* Please be aware that this build *"
+ @echo "* will consume a very large amount *"
+ @echo "* of disk space (150MB+), and can *"
+ @echo "* run slower. Use the debug build *"
+ @echo "* for module development or if you *"
+ @echo "* are experiencing problems. *"
+ @echo "* *"
+ @echo "*************************************"
+
+mod-header:
+ @echo 'Building single module:'
+
+mod-footer: target
+ @echo 'To install, copy $(BUILDPATH)/$(TARGET) to $(MODPATH)'
+ @echo 'Or, run "make install"'
+
+std-header:
+ @echo "*************************************"
+ @echo "* BUILDING INSPIRCD *"
+ @echo "* *"
+ @echo "* This will take a *long* time. *"
+ @echo "* Why not read our wiki at *"
+ @echo "* http://wiki.inspircd.org *"
+ @echo "* while you wait for make to run? *"
+ @echo "*************************************"
+
+finishmessage: target
+ @echo ""
+ @echo "*************************************"
+ @echo "* BUILD COMPLETE! *"
+ @echo "* *"
+ @echo "* To install InspIRCd, type: *"
+ @echo "* make install *"
+ @echo "*************************************"
+
+install: target@EXTRA_DIR@
+ @-install -d -m $(INSTMODE) $(BASE)
+ @-install -d -m $(INSTMODE) $(BINPATH)
+ @-install -d -m $(INSTMODE) $(CONPATH)
+ @-install -d -m $(INSTMODE) $(MODPATH)
+ -install -m $(INSTMODE) $(BUILDPATH)/modules/*.so $(MODPATH)
+ -install -m $(INSTMODE) $(BUILDPATH)/bin/inspircd $(BINPATH)
+ -install -m $(INSTMODE) @STARTSCRIPT@ $(@DESTINATION@) 2>/dev/null
+ @$(MAKEENV) make/install-extras.pl install
+ @echo ""
+ @echo "*************************************"
+ @echo "* INSTALL COMPLETE! *"
+ @echo "* *"
+ @echo "* It is safe to ignore any messages *"
+ @echo "* related to copying of conf files. *"
+ @echo "* *"
+ @echo "* REMEMBER TO EDIT YOUR CONFIG FILE *"
+ @echo "*************************************"
+
+@GNU_ONLY RCS_FILES = $(wildcard .git/index .svn/entries)
+@GNU_ONLY GNUmakefile: .Makefile.inc configure .config.cache $(RCS_FILES)
+@GNU_ONLY ./configure -update
+
+clean:
+ @echo Cleaning...
+ @-rm -f src/inspircd src/modes/modeclasses.a include/inspircd_se_config.h
+ @-rm -f src/*.so src/modules/*.so src/commands/*.so
+ @-rm -f src/*.o src/*/*.o src/modules/*/*.o
+ @-rm -f src/.*.d src/*/.*.d src/modules/*/.*.d
+ @-rm -f $(BUILDPATH)/bin/inspircd $(BUILDPATH)/include $(BUILDPATH)/real.mk
+ @-rm -rf $(BUILDPATH)/obj $(BUILDPATH)/modules
+ @-rmdir $(BUILDPATH)/bin 2>/dev/null
+ @-rmdir $(BUILDPATH) 2>/dev/null
+ @echo Completed.
+
+deinstall:
+ -rm $(BINPATH)/inspircd
+ -rm $(MODPATH)/*.so
+ @make/install-extras.pl deinstall
+
+squeakyclean: distclean
+
+launchd_dir:
+ @-install -d -m $(INSTMODE) ${LAUNCHDPATH}
+
+configureclean:
+ rm -f .config.cache
+ rm -f src/modules/Makefile
+ rm -f src/commands/Makefile
+ rm -f src/Makefile
+ -rm -f Makefile
+ rm -f BSDmakefile
+ rm -f GNUmakefile
+ rm -f include/inspircd_config.h
+ rm -f include/inspircd_version.h
+
+distclean: clean configureclean
+
+help:
+ @echo 'InspIRCd Makefile'
+ @echo ''
+ @echo 'Use: ${MAKE} [flags] [targets]'
+ @echo ''
+ @echo 'Flags:'
+ @echo ' V=1 Show the full command being executed instead of "BUILD: dns.cpp"'
+ @echo ' D=1 Enable debug build, for module development or crash tracing'
+ @echo ' -j <N> Run a parallel build using N jobs'
+ @echo ''
+ @echo 'User targets:'
+ @echo ' all Complete build of InspIRCd, without installing'
+ @echo ' install Build and install InspIRCd to the directory chosen in ./configure'
+ @echo ' Currently installs to ${BASE}'
+ @echo ' debug Compile a debug build. Equivalent to "make D=1 all"'
+ @echo ''
+ @echo ' M=m_foo Builds a single module (cmd_foo also works here)'
+ @echo ' T=target Builds a user-specified target, such as "inspircd" or "modules"'
+ @echo ' Other targets are specified by their path in the build directory'
+ @echo ' Multiple targets may be separated by a space'
+ @echo ''
+ @echo ' clean Cleans object files produced by the compile'
+ @echo ' distclean Cleans all files produced by compile and ./configure'
+ @echo ' Note: this includes the Makefile'
+ @echo ' deinstall Removes the files created by "make install"'
+ @echo
+
+.PHONY: all target debug debug-header mod-header mod-footer std-header finishmessage install clean deinstall squeakyclean launchd_dir configureclean help
projects / user / henk / code / inspircd.git / blobdiff