-echo "# Insp Main Makefile" > Makefile
-echo "#" >> Makefile
-echo "# (C) ChatSpike development team" >> Makefile
-echo "#####" >> Makefile
-echo "# MAKEFILE DYNAMICLY GENERATED BY ./configure" >> Makefile
-echo "# DO NOT MODIFY UNLESS YOU KNOW WHAT YOU ARE DOING!" >> Makefile
-echo "#####" >> Makefile
-echo "# Original Makefile & ./configure by <Craig@ChatSpike.net>" >> Makefile
-echo "# Small modifications by <brain@ChatSpike.net>" >> Makefile
-echo "#" >>Makefile
-echo ""
-echo "CC = g++" >> Makefile
-echo "MAKE = $MAKEPROG" >> Makefile
-echo "PROGS = inspircd" >> Makefile
-echo "FLAGS = $FLAGS" >> Makefile
-echo "LDLIBS = $LDLIBS" >> Makefile
-echo "CONPATH = $CONFIG_DIR" >> Makefile
-echo "MODPATH = $MODULE_DIR" >> Makefile
-echo "BINPATH = $BINARY_DIR" >> Makefile
-echo "MODULES =$MODULES" >> Makefile
-echo "MAKEARGS = 'PROGS=\${PROGS}' 'FLAGS=\${FLAGS}' 'CC=\${CC}' 'LDLIBS=\${LDLIBS}' 'MODULES=\${MODULES}' 'MODPATH=\$(MODPATH)'" >> Makefile
-echo "" >> Makefile
-echo "all : ircd mods config bininst" >> Makefile
-echo "" >> Makefile
-echo "mods:" >> Makefile
-echo " \${MAKE} -C src/modules DIRNAME="src/modules" \$(MAKEARGS)" >> Makefile
-echo "" >> Makefile
-echo "ircd:" >> Makefile
-echo " \${MAKE} -C src DIRNAME="src" \$(MAKEARGS)" >> Makefile
-echo "" >> Makefile
-echo "bininst:" >> Makefile
-echo " @cp src/inspircd \$(BINPATH)" >> Makefile
-echo "" >> Makefile
-echo "config:" >> Makefile
-if [ -n "$COPY_CONF" ] ; then
-echo " @cp conf/* \$(CONPATH)" >> Makefile
-else
-echo " echo \"*** Nothing to Be Done for make config\"" >> Makefile
-fi
-echo "clean:" >> Makefile
-echo " rm -rf src/*.o" >> Makefile
-echo " rm -rf src/modules/*.so" >> Makefile
-echo "" >> Makefile
-echo "modclean:" >> Makefile
-echo " rm -rf modules/*.so" >> Makefile
-echo "" >> Makefile
-echo "squeakyclean: modclean clean" >> Makefile
+# InspIRCd Main Makefile
+#
+# (C) InspIRCd Development Team, 2002-2009
+# This file is automagically generated by configure, from
+# .Makefile.inc. Any changes make will go away!
+# Please do not edit unless you know what you're doing.
+#
+
+@GNU_ONLY COMPILE_ROOT = $(shell pwd)
+@BSD_ONLY COMPILE_ROOT != pwd
+
+@IFDEF D
+ NICEFLAGS = @DEVELOPER@
+ HEADER = debug-header
+@ENDIF
+
+NICEFLAGS ?= @FLAGS@
+HEADER ?= std-header
+
+NICEFLAGS += -I$(COMPILE_ROOT)/include
+
+CC = @CC@
+FLAGS = $(NICEFLAGS) -pedantic
+LDLIBS = @LDLIBS@
+BASE = "@BASE_DIR@"
+CONPATH = "@CONFIG_DIR@"
+MODPATH = "@MODULE_DIR@"
+BINPATH = "@BINARY_DIR@"
+LAUNCHDPATH = "/System/Library/LaunchDaemons"
+LIBPATH = "@LIBRARY_DIR@"
+MODULES = @MODULES@
+INSTMODE = 0755
+@GNU_ONLY MAKEFLAGS += --no-print-directory
+
+@IFDEF V
+ RUNCC = $(CC)
+@ELSE
+ @GNU_ONLY MAKEFLAGS += --silent
+ RUNCC = $(COMPILE_ROOT)/make/run-cc.pl $(CC)
+@ENDIF
+
+@GNU_ONLY export COMPILE_ROOT RUNCC FLAGS NICEFLAGS CC LDLIBS MODULES MODPATH LIBPATH INSTMODE
+@BSD_ONLY MAKEARGS = -s 'RUNCC=${RUNCC}' 'FLAGS=${FLAGS}' 'NICEFLAGS=${NICEFLAGS}' 'CC=${CC}' 'LDLIBS=${LDLIBS}' 'MODULES=${MODULES}' 'MODPATH=${MODPATH}' 'LIBPATH=${LIBPATH}' 'INSTMODE=${INSTMODE}'
+
+# Default target
+
+@IFDEF M
+ _all: module
+@ENDIF
+
+all: ircd mods finishmessage
+
+debug:
+ @${MAKE} D=1 all
+
+debug-header:
+ @echo "*************************************"
+ @echo "* BUILDING WITH DEBUG SYMBOLS *"
+ @echo "* *"
+ @echo "* This will take a *long* time. *"
+ @echo "* Please be aware that this build *"
+ @echo "* will consume a very large amount *"
+ @echo "* of disk space (150MB+), and can *"
+ @echo "* run slower. Use the debug build *"
+ @echo "* for module development or if you *"
+ @echo "* are experiencing problems. *"
+ @echo "* *"
+ @echo "*************************************"
+
+std-header:
+ @echo "*************************************"
+ @echo "* BUILDING INSPIRCD *"
+ @echo "* *"
+ @echo "* This will take a *long* time. *"
+ @echo "* Why not read our wiki at *"
+ @echo "* http://wiki.inspircd.org *"
+ @echo "* while you wait for make to run? *"
+ @echo "*************************************"
+
+ircd: $(HEADER)
+ @${MAKE} -C src $(MAKEARGS) inspircd commands
+
+mods: $(HEADER)
+ @${MAKE} -C src/modules $(MAKEARGS)
+
+# Make this depend on 'ircd' and 'mods', so its always output last even with -j
+finishmessage: ircd mods
+ @echo ""
+ @echo "*************************************"
+ @echo "* BUILD COMPLETE! *"
+ @echo "* *"
+ @echo "* To install InspIRCd, type: *"
+ @echo "* make install *"
+ @echo "*************************************"
+
+install: ircd mods@EXTRA_DIR@
+ @-install -d -m $(INSTMODE) $(BASE)
+ @-install -d -m $(INSTMODE) $(LIBPATH)
+ @-install -d -m $(INSTMODE) $(BINPATH)
+ @-install -d -m $(INSTMODE) $(CONPATH)
+ @-install -d -m $(INSTMODE) $(MODPATH)
+ -install -m $(INSTMODE) @STARTSCRIPT@ $(@DESTINATION@) 2>/dev/null
+@INSTALL_LIST@ @echo ""
+ @echo "*************************************"
+ @echo "* INSTALL COMPLETE! *"
+ @echo "* *"
+ @echo "* It is safe to ignore any messages *"
+ @echo "* related to copying of conf files. *"
+ @echo "* *"
+ @echo "* REMEMBER TO EDIT YOUR CONFIG FILE *"
+ @echo "*************************************"
+
+module:
+ @BSD_ONLY @${MAKE} -C src/modules $(MAKEARGS) ${M:S/.so$//}.so
+ @GNU_ONLY @${MAKE} -C src/modules $(MAKEARGS) $(M:.so=).so
+
+clean:
+ @echo Cleaning...
+ @rm -f src/inspircd src/modes/modeclasses.a
+ @rm -f src/*.so src/modules/*.so src/commands/*.so src/modules/*/*.so
+ @rm -f src/*.o src/*/*.o src/modules/*/*.o
+ @echo Completed.
+
+modclean:
+ rm -f src/modules/*.so
+ rm -f src/modules/*.o
+ rm -f src/modules/*/*.so
+ rm -f src/modules/*/*.o
+
+deinstall:
+@UNINSTALL_LIST@
+
+squeakyclean: distclean
+
+launchd_dir:
+ @-install -d -m $(INSTMODE) ${LAUNCHDPATH}
+
+configureclean:
+ rm -f .config.cache
+ rm -f src/modules/Makefile
+ rm -f src/commands/Makefile
+ rm -f src/Makefile
+ -rm -f Makefile
+ rm -f BSDmakefile
+ rm -f GNUmakefile
+ rm -f include/inspircd_config.h
+ rm -f include/inspircd_se_config.h
+
+distclean: modclean clean configureclean
+
+help:
+ @echo 'InspIRCd Makefile'
+ @echo ''
+ @echo 'Use: ${MAKE} [flags] [targets]'
+ @echo ''
+ @echo 'Flags:'
+ @echo ' V=1 Show the full command being executed instead of "BUILD: dns.cpp"'
+ @echo ' D=1 Enable debug build, for module development or crash tracing'
+ @echo ' -j <N> Run a parallel build using N jobs'
+ @echo ''
+ @echo 'User targets:'
+ @echo ' all Complete build of InspIRCd, without installing'
+ @echo ' install Build and install InspIRCd to the directory chosen in ./configure'
+ @echo ' Currently installs to ${BASE}'
+ @echo ' debug Compile a debug build. Equivalent to "make D=1 all"'
+ @echo ' module Builds a single module, which is specified by "M=m_modname"'
+ @echo ' The command "make M=m_modname" is a shortcut for this target'
+ @echo ''
+ @echo ' clean Cleans object files produced by the compile'
+ @echo ' distclean Cleans all files produced by compile and ./configure'
+ @echo ' deinstall Removes the files created by "make install"'
+ @echo
+
+.PHONY: all help debug debug-header std-header ircd mods finishmessage install module clean modclean deinstall squeakyclean launchd_dir configureclean
projects / user / henk / code / inspircd.git / blobdiff