# gnutls or openssl here. The appropriate SSL modules must be loaded
# for ssl to work. If you do not want this bind section to support ssl,
# just remove or comment out this option.
- ssl="gnutls">
+ ssl="gnutls"
+ >
<bind address="" port="6660-6669" type="clients">
# parent: This setting is to specify if this connect class
# inherits settings from any other. Put the other class's name
- # in here to use its settings as a template - for example, if
- # you only want to adjust sendq and a password
+ # in here to use its settings as a template - for example, if
+ # you only want to adjust sendq and a password
parent="main"
# allow: What IP addresses/hosts to allow for this block.
# password: Password to use for this block/user(s)
password="secret"
+ # maxchans: Maximum number of channels a user in this class
+ # be in at one time. This overrides every other maxchans setting.
+ #maxchans="30"
+
+ # timeout: How long (in seconds) the server will wait before
+ # disconnecting a user if they do not do anything on connect.
+ # (Note, this is a client-side thing, if the client does not
+ # send /nick, /user or /pass)
+ timeout="10"
+
+ # localmax: Maximum local connections per IP (or CIDR mask, see below).
+ localmax="3"
+
+ # globalmax: Maximum global (network-wide) connections per IP (or CIDR mask, see below).
+ globalmax="3"
+
+ # useident: Defines if users in this class MUST respond to a ident query or not.
+ useident="no"
+
+ # limit: How many users are allowed in this class
+ limit="5000"
+
+ # modes: Usermodes that are set on users in this block on connect.
+ # Enabling this option requires that the m_conn_umodes module be loaded.
+ # This entry is highly recommended to use for/with IP Cloaking/masking.
+ # For the example to work, this also requires that the m_cloaking
+ # module be loaded as well.
+ modes="+x"
+
# port: What port this user is allowed to connect on. (optional)
# The port MUST be set to listen in the bind blocks above.
port="6667">
# disconnecting a user if they do not do anything on connect.
# (Note, this is a client-side thing, if the client does not
# send /nick, /user or /pass)
- timeout="60"
+ timeout="10"
# pingfreq: How often (in seconds) the server tries to ping connecting clients.
pingfreq="120"
- # sendq: Amount of data that the server is allowed to send to the user
- # before they are dropped.
- sendq="262144"
+ # hardsendq: maximum amount of data allowed in a client's send queue
+ # before they are dropped. Keep this value higher than the length of
+ # your network's /LIST or /WHO output, or you will have lots of
+ # disconnects from sendq overruns!
+ hardsendq="1048576"
+
+ # softsendq: amount of data in a client's send queue before the server
+ # begins delaying their commands
+ softsendq="8192"
- # recvq: amount of data allowed in a clients queue before they are dropped.
+ # recvq: amount of data allowed in a client's queue before they are dropped.
recvq="8192"
# localmax: Maximum local connections per IP.
# modes: Usermodes that are set on users in this block on connect.
# Enabling this option requires that the m_conn_umodes module be loaded.
# This entry is highly recommended to use for/with IP Cloaking/masking.
+ # For the example to work, this also requires that the m_cloaking
+ # module be loaded as well.
modes="+x">
# throttle limits across a CIDR range. (A CIDR range is a group of #
# IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
# represented as 192.168.1.0/24). This means that abuse across an ISP #
-# is detected and curtailed much easier. #
+# is detected and curtailed much easier. Here is a good chart that #
+# shows how many IPs the different CIDRs correspond to: #
+# http://en.wikipedia.org/wiki/CIDR#Prefix_aggregation #
# #
<cidr
motd="inspircd.motd.example"
# rules: Path to your rules file. Path is relative to the conf directory.
+ # This is optional and is displayed when a user does /rules on the network.
rules="inspircd.rules.example">
#-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<dns
# server: DNS server to use to attempt to resolve IP's to hostnames.
- server="127.0.0.1"
+ # in most cases, you won't need to change this, as inspircd will
+ # automatically detect the nameserver depending on /etc/resolv.conf
+ # (or, on windows, your set nameservers in the registry.)
+ # Note that this must be an IP address and not a hostname, because
+ # there is no resolver to resolve the name until this is defined!
+ #
+ # server="127.0.0.1"
# timeout: seconds to wait to try to resolve DNS/hostname.
timeout="5">
# should be suffixed with.
suffixpart="\""
+ # fixedquit: Set all users' quit messages to this value.
+ #fixedquit=""
+
+ # fixedpart: Set all users' part messages in all channels
+ # to this value.
+ #fixedpart=""
+
# syntaxhints: If enabled, if a user fails to send the correct parameters
# for a command, the ircd will give back some help text of what
# the correct parameters are.
# it will just message the user normally.
ircumsgprefix="no"
- # announcets: If set to yes, when the TS on a channel changes, all users
+ # announcets: If set to yes, when the TimeStamp on a channel changes, all users
# in channel will be sent a NOTICE about it.
announcets="yes"
+ # allowmismatched: Setting this option to yes will allow servers to link even
+ # if they don't have the same VF_OPTCOMMON modules loaded. Setting this to
+ # yes may introduce some desyncs and weirdness.
+ allowmismatched="no"
+
# hostintopic: If enabled, channels will show the host of the topicsetter
- # in the topic.
+ # in the topic. If set to no, it will only show the nick of the topicsetter.
hostintopic="yes"
# pingwarning: If a server does not respond to a ping within x seconds,
netbuffersize="10240"
# maxwho: Maximum number of results to show in a /who query.
- # It is not recommended to set this above 1024.
- maxwho="128"
+ maxwho="4096"
# somaxconn: The maximum number of connections that may be waiting
# in the accept queue. This is *NOT* the total maximum number of
# defined to account for a null terminator on the end of the text. #
# #
# These values should match network-wide otherwise issues will occur. #
+# #
+# The highest safe value you can set any of these options to is 500, #
+# but it is recommended that you keep them somewhat #
+# near their defaults (or lower). #
<limits
# maxnick: Maximum length of a nickname.
projects / user / henk / code / inspircd.git / blobdiff