# connect in the IP range 192.168.1.0-192.168.1.255, and ipv4clone #
# was set to '24', the third connection would be disconnected. #
# #
-# Valid values are 0-32, but you *don't* want 0. #
+# Valid values are 0-32, but you *don't* want 0. Using values which #
+# are not multiples of 8 can give confusing behaviour. #
+# For more info, see: http://www.inspircd.org/wiki/CIDR_Tutorial #
# #
# ipv6clone works in the same way, except for ipv6 addresses. Valid #
# range is 0-128, but you *don't* want anything too small. #
<banlist chan="#morons" limit="128">
<banlist chan="*" limit="69">
-#-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+#-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# This tag is optional, and specifies one or more commands which are #
-# not available to non-operators. For example you may wish to disable #
-# NICK and prevent non-opers from changing their nicknames. #
+# This tag is optional, and specifies one or more features which are #
+# not available to non-operators. #
+# #
+# For example you may wish to disable NICK and prevent non-opers from #
+# changing their nicknames. #
# Note that any disabled commands take effect only after the user has #
# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
# so for example disabling NICK will not cripple your network. #
# #
-
-#<disabled commands="TOPIC MODE">
+# `fakenonexistant' will make the ircd pretend that nonexistant #
+# commands simply don't exist to non-opers ("no such command"). #
+# #
+#<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# This can be useful for finding servers which are #
# at risk of pinging out due to network issues. #
# #
-# exemptchanops - This option allows channel operators to be exempted#
-# from certain channel modes. #
-# Supported modes are +SfFgNc. Defaults to off. #
-# #
# defaultmodes - The default modes to be given to each channel on #
# creation. Defaults to 'nt'. There should be no + #
# or - symbols in this sequence, if you add them #
# is totally freeform, you may place any text here #
# you wish. #
# #
+# exemptchanops - This option allows channel operators to be exempted#
+# from certain channel modes. #
+# Supported modes are +SfFgNc. Defaults to off. #
+# #
+# invitebypassmodes - This option allows /invite to bypass modes #
+# other than +i. #
+# #
+# #
<options prefixquit="Quit: "
suffixquit=""
allowhalfop="yes"
defaultmodes="nt"
moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
- exemptchanops="">
+ exemptchanops=""
+ invitebypassmodes="yes">
#-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
# You may also log *everything* by using a type of *, and subtract things out
# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
#
-# Channel Logging
-# ---------------
-#
-# I'm aware this would probably better belong in the modules section, but this
-# is heavily interrelated to logging, and as such will be documented here.
-#
-# m_chanlog is one of the modules which can alter logging to it's own thing.
-# An example of this may be:
-#
-#<module name="m_chanlog.so">
-#<log method="channel" type="OPER USERS CHANNELS" level="default" target="#services">
-#
# The following log tag is highly default and uncustomised. It is recommended you
# sort out your own log tags. This is just here so you get some output.
<log method="file" type="* -USERINPUT -USEROUTPUT -m_spanningtree" level="default" target="ircd.log">
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
-# Well done, you've reached the end of this. #
+# Well done, you've reached the end of the basic configuration, your #
+# ircd should now start if you want to try it out! (./inspircd start) #
+# #
# We now suggest you read and edit modules.conf, as modules are what #
# provide almost all the features of InspIRCd. :) #
# #