-
This system provides help for commands and modes.
Specify your question or a command name as the
-parameter for this command. If you are an oper
-you must prefix your query with a ? symbol.
+parameter for this command.
-
-/HELPOP COMMANDS - To see a list of user commands
+/HELPOP CUSER - To see a list of user commands
/HELPOP COPER - To see a list of oper commands
/HELPOP UMODES - To see a list of user modes
/HELPOP CHMODES - To see a list of channel modes">
# User Commands #
#####################
-<helpop key="commands" value="User Commands
+<helpop key="cuser" value="User Commands
-------------
USER NICK QUIT VERSION PING
PONG ADMIN PRIVMSG INFO TIME
USERHOST AWAY ISON SUMMON USERS
INVITE PASS WHOWAS LINKS MAP
COMMANDS MODULES KNOCK SILENCE DEVOICE
-REMOVE UNINVITE VHOST WATCH USERIP">
+REMOVE UNINVITE VHOST WATCH TBAN
+TITLE CYCLE DCCALLOW FPART FINGERPRINT
+SSLINFO">
+
+<helpop key="sslinfo" value="/SSLINFO [nick]
+Shows the SSL key fingerprint for the user if they have an SSL
+client key.">
+
+<helpop key="fingerprint" value="/FINGERPRINT [nick]
+Shows the SSL fingerprint of a user.">
+
+<helpop key="uninvite" value="/UNINVITE [nick] [channel]
+Uninvite a user from a channel, same syntax as INVITE.">
+
+<helpop key="tban" value="/TBAN [channel] [duration] [banmask]
+Sets a timed ban. The duration of the ban can be specified in the
+following format: 1w2d3h4m6s which indicates a ban of one week, two
+days, three hours, four minutes and six seconds. Alternatively the
+ban may just be specified as a number of seconds. All timed bans
+appear in the banlist as normal bans and may be safely removed
+before their time is up.">
+
+<helpop key="dccallow" value="/DCCALLOW [+|-] [nick] [duration]
+Add a nickname to or delete a nickname from your DCCALLOW list.">
+
+<helpop key="cycle" value="/CYCLE [channel]
+Cycles a channel (Leaving and Rejoining), overrides restrictions that
+would stop a new user joining, such as User Limits and Channel Keys.">
+
+<helpop key="title" value="/TITLE [name] [password]
+Adds a WHOIS title line and optionally sets a VHOST depending
+on username and password.">
<helpop key="watch" value="/WATCH [C|S|+/-[NICK]]
Adds or deletes a user from the watch list. C clears the list
<helpop key="vhost" value="/VHOST [username] [password]
Authenticate for a vhost.">
-<helpop key="kick" value="/REMOVE [channel] [nick] {[reason]}
-Removes a user from a channel you specify. You must be
-At least a channel halfoperator to remove a user.
-A removed user will part with a message stating they
-were removed from the channel and by whom.">
+<helpop key="remove" value="/REMOVE [channel] [nick] {[reason]}
+Removes a user from a channel you specify. You must be at least a
+channel halfoperator to remove a user. A removed user will part with
+a message stating they were removed from the channel and by whom.">
+
+<helpop key="fpart" value="/FPART [nick] [channel] {[reason]}
+This behaves identically to /REMOVE, the only difference is that that
+[channel] and [nick] parameters are switched around to match /KICK's
+syntax. Also, /REMOVE is a builtin mIRC command which caused trouble
+for some users. This feature was added in the 1.1 branch.">
<helpop key="devoice" value="/DEVOICE [channel]
Devoices yourself from the specified channel.">
-<helpop key="silence" value="/SILENCE +/-[nick]
-A serverside /ignore of the given nick. It does not follow
-the users nick so if they change their nick you will receive
-their messages. /SILENCE without a parameter will list the nicks
-that you have silenced.">
+<helpop key="silence" value="/SILENCE [+/-][hostmask] [p|c|i|n|t|a|x]
+ p Block private messages
+ c Block channel messages
+ i Block invites
+ n Block private notices
+ t Block channel notices
+ a Block all of the above
+ x Exception
+A serverside /ignore of the given hostmask.
+/SILENCE without a parameter will list the hostmasks that you have silenced.">
<helpop key="knock" value="/KNOCK [channel]
Sends a notice to a channel indicating you wish to join.">
<helpop key="nick" value="/NICK [new nick]
Change your nickname to [new nick].">
-<helpop key="quit" value="/QUIT [reason]
+<helpop key="quit" value="/QUIT {[reason]}
Quit from IRC and end your current session.">
<helpop key="version" value="/VERSION
You are at least a halfoperator, the channel topic will be
changed to the new one you provide.">
-<helpop key="who" value="/WHO [channel|nick|servermask|o 0]
-Looks up the information of users matching the range you
-provide. You may only /WHO nicknames in channels or on servers
-where you share a common channel with them.
-The syntax '/WHO o 0' shows a list of online IRC operators.">
+<helpop key="who" value="/WHO [ [search-pattern] [ohurmaiMplf] ]
+Looks up the information of users matching the range you provide.
+You may only /WHO nicknames in channels or on servers where you
+share a common channel with them, or ones which are not +i (unless
+you are an IRC operator). The search-pattern may be a special
+sequence of characters determined by the flags given below, or
+it may be one of a nickname, a channel, a hostmask, an ip address
+mask or a server mask.
+-
+Valid WHO flags
+---------------
+The following flags after the mask have the following affects:
+-
+ o Show online IRC operators matching the mask
+ u Unlimit the results past the maximum /who results value
+ (IRC operators only)
+ r Show all users whose realnames match the mask. When this
+ flag is set it overrides the meaning of the search-pattern,
+ which must contain a glob pattern intended to match GECOS
+ (realname) fields.
+ h Show real hostnames rather than masked hostnames (IRC
+ operators only)
+ m Search for all users with a given set of user modes. When
+ this flag is set it overrides the meaning of the
+ search-pattern, which must contain the mode sequence to
+ search for, for example to find all users with +i and
+ without +s, issue the command WHO +i-s m.
+ a Show all users who have an away message matching the given mask
+ p Show all users who are connected on the given port number
+ i Show all users who have an ident (username) matching the given mask
+ M Show all users who have metadata attached to them with
+ the given key name
+ l Show only local users
+ f Show only remote (far) users
+-
+You may combine multiple flags in one WHO command except where stated in the table above.">
<helpop key="motd" value="/MOTD [server]
Show the message of the day for [server]. Messages of the
<helpop key="oper" value="/OPER [login] [password]
Attempts to authenticate a user as an IRC operator.
Please be aware that both successful and unsuccessful oper attempts
-Are logged, and sent to online IRC operators.">
+are logged, and sent to online IRC operators.">
<helpop key="list" value="/LIST [pattern]
Creates a list of all existing channels matching the glob pattern
Returns the hostname and nickname of a user, and some other
miscellaneous information.">
-<helpop key="userip" value="/USERIP [nickname]
-Returns the ip and nickname of a user.">
-
<helpop key="away" value="/AWAY {message}
If a message is given, marks you as being away, otherwise
removes your away status and previous message.">
SAJOIN SAPART SAMODE SAQUIT SANICK
SETIDLE SETHOST SETNAME SETIDENT SWHOIS
OPERMOTD CHGHOST CHGNAME CHGIDENT CBAN
-NICKLOCK NICKUNLOCK LOADMODULE UNLOADMODULE GLOBOPS
-SPYLIST SPYNAMES GLOADMODULE GUNLOADMODULE MKSHA256
-PARKSTATS FREEZE UNFREEZE OPERPERMS RCONNECT">
+NICKLOCK NICKUNLOCK LOADMODULE UNLOADMODULE RELOADMODULE
+SPYLIST SPYNAMES GLOADMODULE GUNLOADMODULE GRELOADMODULE
+FREEZE UNFREEZE OPERPERMS RCONNECT RSQUIT
+CHECK CLONES FILTER GLOBOPS USERIP
+JUMPSERVER LOCKSERV UNLOCKSERV ALLTIME TAXONOMY
+TLINE">
+
+<helpop key="userip" value="/USERIP [nickname]
+Returns the ip and nickname of a user.">
+
+<helpop key="tline" value="/TLINE [host or ip mask]
+This command returns the number of local and global clients matched,
+and the percentage of clients matched, plus how they were matched
+(by IP address or by hostname).">
+
+<helpop key="taxonomy" value="/TAXONOMY [nick]
+Lists all metadata attached to the user.">
+
+<helpop key="lockserv" value="/LOCKSERV
+Locks out all new connections notifying connecting users that the
+service is temporarily closed and to try again later.">
+
+<helpop key="unlockserv" value="/UNLOCKSERV
+Opens the server up again for new connections.">
+
+<helpop key="jumpserver" value="/JUMPSERVER {[newserver] [newport] [+/-flags] {:[reason]}}
+Sets or cancels jumpserver mode. If no parameters are given,
+jumpserver mode is cancelled, if it is currently set. If parameters
+are given, a server address must be given for [newserver] and a
+server port must be given for [newport]. Zero or more status flags
+should be given for 'flags', from the list below (if you do not
+wish to specify any flags just place a '+' in this field):
+1. +a: Redirect all users immediately (except for opers) and cause
+them to quit with the given reason
+2. +n: Redirect any new users who connect and cause them to quit
+during registration
+You may use + and - to set or unset these flags in the command, the
+default flags are -a+n, which will just redirect new users. The
+reason parameter is optional, and if not provided defaults to
+'Please use this server/port instead' (the default given in various
+numeric lists)">
+
+<helpop key="filter" value="/FILTER [filter-definition] {[action] [flags] {[gline-duration]} :[reason]}
+This command will add a filter when more than one parameter is
+given, using the specified filter definition, action, gline
+duration (when the type is 'gline') and reason. When only one
+parameter is provided (the filter pattern) the provided filter will
+be removed. Note that if you remove a configuration-defined filter,
+it will re-appear at next rehash unless it is also removed from the
+config file.">
+
+<helpop key="clones" value="/CLONES [limit]
+Retrieves a list of users with more clones than the specified
+limit.">
+
+<helpop key="check" value="/CHECK [nick|ip|hostmask|channel]
+Allows opers to look up advanced information on channels, hostmasks
+or IP addresses, in a similar way to WHO but in more detail.">
+
+<helpop key="alltime" value="/ALLTIME
+Shows the time (with any delta, if applied) on all servers on
+the network.">
<helpop key="rconnect" value="/RCONNECT [source mask] [target mask]
All servers matching [source mask] will try to connect to
the first server in the config file matching [target mask].">
+<helpop key="rsquit" value="/RSQUIT {[source mask]} [target mask]
+Causes the remote server [target mask] to be disconnected from
+the network, by [source mask] if specified.">
+
<helpop key="operperms" value="/OPERPERMS [nick]
List all commands an oper has access to use.">
<helpop key="unfreeze" value="/UNFREEZE [nick]
Unfreezes a user frozen by the /FREEZE command.">
-<helpop key="parkstats" value="/PARKSTATS
-Displays the park module's statistics">
-
<helpop key="spylist" value="/SPYLIST
Operates the same as /LIST but includes +s and +p channels.">
<helpop key="globops" value="/GLOBOPS [message]
Sends a message to all +g users.">
-<helpop key="cban " value="/CBAN [channel] {[duration] :[reason]}
+<helpop key="cban" value="/CBAN [channel] {[duration] :[reason]}
Sets or removes a channel ban. You must specify at least
3 parameters to add a ban, and one parameter to remove a ban.
The duration may be specified in seconds, or in the following format
<helpop key="sapart" value="/SAPART [nick] [channel]
Forces the user to part the channel.">
-<helpop key="samode" value="/SAMODE [#chan/nick] +/-[modes] {[parameters for modes]}
+<helpop key="samode" value="/SAMODE [#chan] +/-[modes] {[parameters for modes]}
Gives the channel or nick the modes specified.">
<helpop key="sanick" value="/SANICK [nick] [new nick]
<helpop key="swhois" line="/SWHOIS [nick] [swhois]
Sets the users swhois field to the given swhois.">
-<helpop key="mkpasswd" value="/MKPASSWD [plaintext]
-Encodes the plaintext to an MD5 hash and displays the result.">
-
-<helpop key="mksha256" value="/MKSHA256 [plaintext]
-Encodes the plaintext to an SHA-256 hash and displays the result.">
+<helpop key="mkpasswd" value="/MKPASSWD [hashtype] [plaintext]
+Encodes the plaintext to a hash of the given type and displays
+the result.">
<helpop key="opermotd" value="/OPERMOTD
Re-displays the Oper MOTD.">
configured the server for linking in your configuration file,
and provided a password.">
-<helpop key="squit" value="/SQUIT
+<helpop key="squit" value="/SQUIT [servermask]
Disconnects the local server from the mesh network, causing every
other server in the network to drop it.">
Unloads a module from the IRCd. The module cannot have the static
flag set (see the output of /MODULES).">
+<helpop key="reloadmodule" value="/RELOADMODULE [filename.so]
+Unloads and reloads a module in the IRCd. This module cannot have
+the static flag set (see the output of /MODULES).">
+
<helpop key="gloadmodule" value="/GLOADMODULE [filename.so]
Globally loads a module into the network.">
Globally unloads a module from the network. The module cannot
have the static flag set (see the output of /MODULES).">
+<helpop key="greloadmodule" value="/GRELOADMODULE [filename.so]
+Globally unloads and reloads a module in the network. This module
+cannot have the static flag set (see the output of /MODULES).">
+
<helpop key="kline" value="/KLINE [user@host] {[duration] :[reason]}
-Sets or removes a k-line (host based ban) on a host and ident mask.
+Sets or removes a k-line (local host based ban) on a host and ident mask.
You must specify at least 3 parameters to add a ban, and one
parameter to remove a ban (just the user@host section).
The duration may be specified in seconds, or in the following format
5 minutes and 6 seconds. All fields in this format are optional.">
<helpop key="gline" value="/GLINE [user@host] {[duration] :[reason]}
-Sets or removes a g-line (global host based ban) on host mask.
+Sets or removes a g-line (host based ban) on host mask.
You must specify at least 3 parameters to add a ban, and one
parameter to remove a ban (just the user@host section).
The duration may be specified in seconds, or in the following format
s Can receive server notices
n [mask] Can receive server notices specified by [mask]
x Cloaked hostname (requires cloaking module)
-g Can receive globops (requires globops module)
h Will receive helpops notification (requires helpop module)
r Nickname is registered
+d Hides all non-private messages and notices
R Only registered users can PRIVMSG this nickname
B Is a bot
G Messages are censored to user
W Can see when a user uses WHOIS on them
S mIRC colour codes are stripped to the user
-D User can not receive PRIVMSGs">
+D User can not receive PRIVMSGs
+H Hides an oper's WHOIS line
+I Hides a user's channel list from non-opers
+Q Hides an oper completely
+R Only +r users can message you">
<helpop key="chmodes" value="Channel Modes
-------------
o Show a list of all valid oper usernames and hostmasks
l Show all inbound and outbound server and client connections
u Show server uptime
-k Show k-lines (local bans)
-g Show g-lines (global bans)
+k Show k-lines (local host bans)
+g Show g-lines (host bans)
q Show q-lines (nick mask bans)
Z Show z-lines (ip mask bans)
Y Show connection classes
-C Show link blocks
+c Show link blocks
U Show u-lined servers
P Show online opers and their idle times
I Show connect class permissions
e Show e-lines (local ban exemptions)
C Show channel bans
s Show filters
+L Show all client connections with information and IP address
+T Show bandwidth/socket statistics
+p Show open client ports, and the port type (ssl, plaintext, etc) plus number of users on each port
-
Note that all /STATS use is broadcast to online IRC operators.">
projects / user / henk / code / inspircd.git / blobdiff