# Alias module: Allows you to define server-side command aliases
#<module name="m_alias.so">
#
+# Fantasy settings:
+#
+#<fantasy prefix="!" allowbots="no">
+#
+# prefix:
+# Set the prefix for in-channel aliases (fantasy commands) to the
+# specified character. If not set, the default is "!".
+# allowbots:
+# If this is set to no, +B clients will not be able to use fantasy
+# commands. If not set, the default is no.
+#
#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_alias.so module loaded, you may also define #
# matched, or it has no format value. Aliases are #
# read from the top of the file to the bottom. #
# #
+# usercommand - If this is true, the alias can be run simply as #
+# /aliasname. Defaults to true. #
+# #
+# channelcommand - If this is true, the alias can be used as an #
+# in-channel alias or 'fantasy command', prefixed #
+# by the fantasy prefix character, !aliasname by #
+# default. Defaults to false. #
+# #
# format - If this is defined, the parameters of the alias #
# must match this glob pattern. For example if you #
# want the first parameter to start with a # for #
#
#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
# requires="NickServ" uline="yes">
+#
+# You may also add aliases to trigger based on something said in a
+# channel, aka 'fantasy' commands, configured in the same manner as any
+# other alias, with usercommand="no" and channelcommand="yes" The
+# command must be preceded by the fantasy prefix when used.
+#
+#<alias text="CS" usercommand="no" channelcommand="yes"
+# replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
+#
+# This would be used as "!cs <command> <options>", with the channel
+# being automatically inserted after the command in the message to
+# ChanServ, assuming the fantasy prefix is "!".
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Allowinvite module: Gives channel mode +A to allow all users to use
# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
# New style:
-# <cgihost type="webirc" pass="foobar"
+# <cgihost type="webirc" password="foobar"
# mask="somebox.mysite.com"> # Get IP from WEBIRC
#
# IMPORTANT NOTE:
# over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
#
#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
-# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded.
+# This allows for 10 connections in an hour with a 10 minute ban if that is exceeded.
#
#<module name="m_connectban.so">
#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# name - The username used to identify
# password - The password used to identify
+# hash - The hash for the specific user's password (optional)
+# m_password_hash.so and a hashing module must be loaded for this to work
# host - Allowed hostmask [optional]
# title - Title shown in whois
# vhost - Displayed host [optional]
#
#<title name="foo" password="bar" title="Official Chat Helper">
#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
+#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command
# #
# Your choice of regex engine must match on all servers network-wide.
#
+# You may specify specific channels that are exempt from being filtered:
+#<exemptfromfilter channel="#blah">
+#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_filter module, then #
# http stats module: Provides basic stats pages over HTTP
# Requires m_httpd.so to be loaded for it to function.
#<module name="m_httpd_stats.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-#
-#<httpstats stylesheet="http://remote.style/sheet.css">
-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support
# the user in a 'connecting' state until the lookup is complete. #
# The bind value indicates which IP to bind outbound requests to. #
# #
-#<ident timeout="5" bind="">
+#<ident timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite except module: Adds support for channel invite exceptions (+I)
# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
# opers are still able to see invisible users, and if an oper with +Q
# deopers, they will become visible.
-#
-# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you
-# must first add the value canquiet="yes" to that oper's type tag.
#
# This module is oper-only.
#
# need defining, otherwise they should be set similar to the examples #
# above. #
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# LDAP oper configuration module: Adds the ability to authenticate #
+# opers via LDAP. This is an extra module which must be enabled #
+# explicitly by symlinking it from modules/extra, and requires the #
+# OpenLDAP libs. Re-run configure with: ./configure --enable-extras=m_ldapoper.cpp
+# and run make install, then uncomment this module to enable it. #
+# #
+#<module name="m_ldapoper.so">
+# #
+# Configuration: #
+# #
+# <ldapoper baserdn="ou=People,dc=brainbox,dc=cc"
+# server="ldap://brainwave.brainbox.cc"
+# searchscope="subtree"
+# binddn="cn=Manager,dc=brainbox,dc=cc"
+# bindauth="mysecretpass">
+# #
+# Available configuration items are identical to the same items in #
+# m_ldapauth above. #
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
# used to temporarily close/open for new connections to the server. #
#
#<module name="m_lockserv.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Map hiding module: replaces /MAP and /LINKS output to users with a #
+# message to see a website, set by maphide="http://link.to/site" in #
+# the security tag, instead. #
+#<module name="m_maphide.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Msg flood module: Adds message/notice flood protection (+f)
#<module name="m_messageflood.so">
# This is supported by mIRC, x-chat, klient, and maybe more.
#<module name="m_namesx.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# National characters module:
+# 1) Allows using national characters in nicknames.
+# 2) Allows using custom (national) casemapping over the network.
+# file -- filename of existing file in "locales" directory
+# casemapping -- custom value for 005 numeric (if you want it to be
+# different from the filename.
+#
+#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink">
+#<module name="m_nationalchars.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
# Provides channel mode +F.
#<module name="m_nicklock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No ctcp module: Adds the channel mode +C to block CTCPs
+# No ctcp module: Adds the channel mode +C to block CTCPs and extban C
+# to block CTCPs sent by specific users.
#<module name="m_noctcp.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No kicks module: Adds the +Q channel mode
+# No kicks module: Adds the +Q channel mode and the Q: extban to deny
+# certain users from kicking.
#<module name="m_nokicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<module name="m_nonicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No Notice module: adds the channel mode +T
+# No part message module: adds extban 'p' to block part messages from #
+# matching users. #
+#<module name="m_nopartmsg.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No Notice module: adds the channel mode +T and the extban T to block
+# specific users from noticing the channel.
#<module name="m_nonotice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# This module is oper-only.
#<module name="m_operchans.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper flood module: Removes flood limits from users upon opering up
-# This module is oper-only.
-#<module name="m_operflood.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper invex/extban module: Adds +beI type O, to ban, exempt, and invex
# given oper type masks.
# This module is oper-only.
#<module name="m_operlog.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper prefixing module: Gives IRC operators a prefix status character
+# on all channels they are in.
+#
+#<module name="m_operprefix.so">
+#
+# You may additionally customise the prefix character.
+#<operprefix prefix="!">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper MOTD module: Provides support for seperate message of the day
# on oper-up
# #
# If you are using the m_opermotd.so module, specify the motd here #
# #
-#<opermotd file="oper.motd">
+# onoper - Should the message be sent on /OPER or only when #
+# /OPERMOTD is used. Use "yes" or "no". #
+# #
+#<opermotd file="oper.motd" onoper="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
# To use, SAJOIN must be in one of your oper class blocks.
#<module name="m_sajoin.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAKICK module: Adds the /SAKICK command
+# This module is oper-only.
+# To use, SAKICK must be in one of your oper class blocks.
+#<module name="m_sakick.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAMODE module: Adds the oper /SAMODE command
# This module is oper-only.
# To use, SAQUIT must be in one of your oper class blocks.
#<module name="m_saquit.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SATOPIC module: Adds the oper /SATOPIC command
+# This module is oper-only.
+# To use, SATOPIC must be in one of your oper class blocks.
+#<module name="m_satopic.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SASL authentication module: Provides support for IRC Authentication
# Layer (aka: atheme SASL) via AUTHENTICATE.
# perform. It should be noted that if a shunned user issues QUIT or PART
# then their message will be removed, as if they did not issue one.
#
-# You may also (optionally) let the user know that their command was blocked.
-#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes">
+# You can (optionally) let the user know that their command was blocked.
+#
+# You may also let SHUN affect opers (defaults to no).
+#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spy module: Provides the ability to see the complete names list of
# user - Username for the vhost. #
# #
# pass - Password for the vhost. #
+# #
+# hash - The hash for the specific user (optional)
+# m_password_hash.so and a hashing module must be loaded for this to work
# #
# host - Vhost to set. #
#
#<vhost user="some_username" pass="some_password" host="some.host">
+#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
projects / user / henk / code / inspircd.git / blobdiff