#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
# CHGHOST module: Adds the /CHGHOST command
# This module is oper-only.
# To use, CHGHOST must be in one of your oper class blocks.
+# NOTE: Services will not be able to set vhosts on users if this module
+# isn't loaded. If you're planning on running services, you probably
+# want to load this.
#<module name="m_chghost.so">
#
#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
# than the auditorium mode. Only channel ops may set the +D mode.
#<module name="m_delayjoin.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Delay message module: Adds the channel mode +d which disallows a user
+# from talking in the channel unless they've been joined for X seconds.
+# Settable a la: /mode +d 30
+#<module name="m_delaymsg.so>
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny Channels: Deny Channels from being used by users
#<module name="m_denychans.so">
# #
#<include file="filter.conf">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Foobar module: does nothing - historical relic
-#<module name="m_foobar.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Gecosban: Implements extended ban r:, which stops anyone matching
# a mask like +b r:*realname?here* from joining a channel.
# GeoIP module: Allows the server admin to ban users by country code.
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp
# and run make install, then uncomment this module to enable it.
+# This module requires GeoIP to be installed on your system,
+# use your package manager to find the appropriate packages
+# or check the InspIRCd wiki page for this module.
#<module name="m_geoip.so">
#
#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
# opers are still able to see invisible users, and if an oper with +Q
# deopers, they will become visible.
#
-# This module is oper-only.
+# This module is oper-only and seen by many to be quite abusive.
#
#<module name="m_invisible.so">
#<module name="m_nonotice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper channels mode: Adds the +O channel mode
-# This module is oper-only.
-#<module name="m_operchans.so">
+# Network buisness join module
+# Allows an oper to join a channel using /OJOIN, giving them +Y on the
+# channel which makes them immune to kick/deop/etc.
+#<module name="m_ojoin.so">
+#
+#<ojoin prefix="!" notice="yes" op="yes">
+# Specify the prefix that +Y will grant here
+# Leave prefix empty if you do not wish +Y to grant a prefix
+# If notice is set to on, upon ojoin, the server will notice
+# the channel saying that the oper is joining on network business
+# If op is set to on, it will give them +o along with +Y
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper invex/extban module: Adds +beI type O, to ban, exempt, and invex
-# given oper type masks.
+# Oper channels mode: Adds the +O channel mode and +beI type O:<mask>
+# to ban, exempt, and invex given oper type masks.
# e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you
# may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins.
# +be work in a similar fashion.
-# This module is oper-only.
#
-#<module name="m_operinvex.so">
+#<module name="m_operchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper Join module: Auto-joins opers to a channel upon oper-up
# This module is oper-only.
#<module name="m_permchannels.so">
#
+# If you like, m_permchannels can write a config file of permanent channels
+# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
+# If you want to do this, set the filename below, and uncomment the include.
+#
+# The conf file generated has a path relative to the inspircd binary, hence '../conf/'.
+#
+#<permchanneldb filename="../conf/permchannels.conf">
+#<include file="permchannels.conf">
+#
# You may also create channels on startup by using the <permchannels> block.
#<permchannels channel="#opers" modes="is" topic="Opers only.">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Registered users only channel creation
# Allows only registered users and opers to create new channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
#<module name="m_regonlycreate.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<module name="m_remove.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels
+# Restricted channels module: Allows only opers to create channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
#<module name="m_restrictchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers
+# Restrict message module: Allows users to only message opers.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
#<module name="m_restrictmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# RPC test module: A test of the RPC API
#<module name="m_rpctest.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Provide /LIST throttling (to prevent flooding) and /LIST safety to
-# prevent excess flood when the list is large.
-#<module name="m_safelist.so">
-#
-#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# When using Safelist, you may set the following values;
-#
-# The first value, 'throttle', sets the amount of time in seconds a user
-# must wait between LIST commands. For example, if this is set to 60
-# (the default) then the user may not /LIST more than once a minute.
-# If not defined, the default value is 60 seconds.
-#
-# The second value, 'maxlisters', indicates the maximum number of users
-# which may be retrieving a LIST at once. It is not recommended you raise
-# this value, as increasing it too high can make your network vulnerable
-# to floodbots which waste your bandwidth and CPU time with LIST requests.
-#
-#<safelist throttle="60" maxlisters="50">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
# This module is oper-only.
# does not do anything useful without a working SSL module (see below)
#<module name="m_sslmodes.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Dummy ssl module: If you have other servers on your network which
-# have SSL, but your server does not have ssl enabled, you should load
-# this module, which will handle SSL metadata (e.g. the "Is using ssl"
-# field in the WHOIS information).
-#<module name="m_ssl_dummy.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
# if enabled. You must copy the source for this module from the directory
# SSL Info module: Allows users to retrieve information about other
# user's peer SSL certificates and keys. This can be used by client
# scripts to validate users. For this to work, one of m_ssl_gnutls.so
-# or m_ssl_openssl.so must be loaded. You must symlink the source for
-# this module from the directory src/modules/extra.
-# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sslinfo.cpp
-# and run make install, then uncomment this module to enable it.
+# or m_ssl_openssl.so must be loaded. This module also adds the
+# "* <user> is using a secure connection" whois line, the ability for
+# opers to use SSL fingerprints to verify their identity and the ability
+# to force opers to use SSL connections in order to oper up.
+# It is highly recommended to load this module especially if
+# you use SSL on your network.
+# For how to use the oper features, please see the first example <oper> tag
+# in opers.conf.example.
#
#<module name="m_sslinfo.so">
# server to server traffic, you MUST load it before m_spanningtree in #
# your configuration file! #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
-# stored within their SSL certificate and key pair.
-# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
-# be loaded. An extra value should be added to enabled opers, which
-# is in the following format: fingerprint="<hash>". For more information,
-# see the example in the oper blocks.
-# This module is oper-only.
-#<module name="m_ssl_oper_cert.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip colour module: Adds the channel mode +S
#<module name="m_stripcolor.so">
#<module name="m_swhois.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Taxonomy module: Adds the /TAXONOMY command, used to view all
-# metadata attached to a user.
-# This module is oper-only.
-# To use, TAXONOMY must be in one of your oper class blocks.
-#<module name="m_taxonomy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test command module: Does nothing significant. Read: pointless.
-#<module name="m_testcommand.so">
+# Test module: enable this to create a command useful in testing
+# flood control. To avoid accidental use on live networks, the server
+# name must contain ".test" to load the module
+#<module name="m_testnet.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Timed bans module: Adds timed bans and the /TBAN command
-# This module is oper-only.
-# To use, TBAN must be in one of your oper class blocks.
+# Timed bans module: Adds timed channel bans and the /TBAN command
#<module name="m_timedbans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#<module name="m_ziplink.so">
#
-# To use this module, you must enable it as a transport type in your
-# <link> tags or <bind> tags using the transport name 'zip'.
+# To use this module, you must enable it as a ssl type in your
+# <link> tags or <bind> tags using the ssl name 'ziplinks'.
# See the documentation of <link> and <bind>, respectively.
#
projects / user / henk / code / inspircd.git / blobdiff