# #
# By default, ALL modules are commented out. You must uncomment them #
# or add lines to your config to load modules. Please refer to #
-# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
+# http://wiki.inspircd.org/Modules for a list of modules and #
# each modules link for any additional conf tags they require. #
# #
# You may use wildcards in a <module> tag to load all modules which #
# Alias module: Allows you to define server-side command aliases
#<module name="m_alias.so">
#
+# Fantasy settings:
+#
+#<fantasy prefix="!" allowbots="no">
+#
+# prefix:
+# Set the prefix for in-channel aliases (fantasy commands) to the
+# specified character. If not set, the default is "!".
+# allowbots:
+# If this is set to no, +B clients will not be able to use fantasy
+# commands. If not set, the default is no.
+#
#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_alias.so module loaded, you may also define #
# matched, or it has no format value. Aliases are #
# read from the top of the file to the bottom. #
# #
+# usercommand - If this is true, the alias can be run simply as #
+# /aliasname. Defaults to true. #
+# #
+# channelcommand - If this is true, the alias can be used as an #
+# in-channel alias or 'fantasy command', prefixed #
+# by the fantasy prefix character, !aliasname by #
+# default. Defaults to false. #
+# #
# format - If this is defined, the parameters of the alias #
# must match this glob pattern. For example if you #
# want the first parameter to start with a # for #
#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
#
#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
# requires="NickServ" uline="yes">
+#
+# You may also add aliases to trigger based on something said in a
+# channel, aka 'fantasy' commands, configured in the same manner as any
+# other alias, with usercommand="no" and channelcommand="yes" The
+# command must be preceded by the fantasy prefix when used.
+#
+#<alias text="CS" usercommand="no" channelcommand="yes"
+# replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
+#
+# This would be used as "!cs <command> <options>", with the channel
+# being automatically inserted after the command in the message to
+# ChanServ, assuming the fantasy prefix is "!".
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Allowinvite module: Gives channel mode +A to allow all users to use
# #
# Optional - If you specify to use the m_censor module, then you must #
# specify some censor tags. See also: #
-# http://www.inspircd.org/wiki/Censor_Module #
+# http://wiki.inspircd.org/Modules/censor #
#
#<include file="censor.conf">
# Optional - If you specify to use m_cgiirc, then you must specify one
# or more cgihost tags which indicate authorised CGI:IRC servers which
# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module
+# For more information see: http://wiki.inspircd.org/Modules/cgiirc
#
# Set to yes if you want to notice opers when CGI clients connect
# <cgiirc opernotice="no">
# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
# New style:
-# <cgihost type="webirc" pass="foobar"
+# <cgihost type="webirc" password="foobar"
# mask="somebox.mysite.com"> # Get IP from WEBIRC
#
# IMPORTANT NOTE:
# Channel filter module: Allows channel-op defined message
# filtering using simple string matches (channel mode +g)
#<module name="m_chanfilter.so">
+#
+# If hidemask is set to yes, the user will not be shown the mask when
+# his/her message is blocked.
+#<chanfilter hidemask="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel logging module: used to send snotice output to channels, to
#<module name="m_chanprotect.so">
<chanprotect
- # noservices: With this set to no, when a user joins a empty channel,
- # the server will set +q on them. If set to yes, it will only set +o
+ # noservices: With this set to yes, when a user joins a empty channel,
+ # the server will set +q on them. If set to no, it will only set +o
# on them until they register the channel.
noservices="no"
# CHGHOST module: Adds the /CHGHOST command
# This module is oper-only.
# To use, CHGHOST must be in one of your oper class blocks.
+# NOTE: Services will not be able to set vhosts on users if this module
+# isn't loaded. If you're planning on running services, you probably
+# want to load this.
#<module name="m_chghost.so">
#
#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
# over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
#
#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
-# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded.
+# This allows for 10 connections in an hour with a 10 minute ban if that is exceeded.
#
#<module name="m_connectban.so">
#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# name - The username used to identify
# password - The password used to identify
+# hash - The hash for the specific user's password (optional)
+# m_password_hash.so and a hashing module must be loaded for this to work
# host - Allowed hostmask [optional]
# title - Title shown in whois
# vhost - Displayed host [optional]
#
#<title name="foo" password="bar" title="Official Chat Helper">
#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
+#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command
# than the auditorium mode. Only channel ops may set the +D mode.
#<module name="m_delayjoin.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Delay message module: Adds the channel mode +d which disallows a user
+# from talking in the channel unless they've been joined for X seconds.
+# Settable a la: /mode +d 30
+#<module name="m_delaymsg.so>
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny Channels: Deny Channels from being used by users
#<module name="m_denychans.so">
#<module name="m_dnsbl.so"> #
# #
# For configuration options please see the wiki page for m_dnsbl at #
-# http://inspircd.org/wiki/DNS_Blacklist_Module #
+# http://wiki.inspircd.org/Modules/dnsbl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides message filtering, similar to SPAMFILTER.
# #
# Your choice of regex engine must match on all servers network-wide.
#
+# You may specify specific channels that are exempt from being filtered:
+#<exemptfromfilter channel="#blah">
+#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_filter module, then #
# #
#<include file="filter.conf">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Foobar module: does nothing - historical relic
-#<module name="m_foobar.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Gecosban: Implements extended ban r:, which stops anyone matching
# a mask like +b r:*realname?here* from joining a channel.
# GeoIP module: Allows the server admin to ban users by country code.
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp
# and run make install, then uncomment this module to enable it.
+# This module requires GeoIP to be installed on your system,
+# use your package manager to find the appropriate packages
+# or check the InspIRCd wiki page for this module.
#<module name="m_geoip.so">
#
#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you choose to use the m_hostchange.so module. #
-# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
+# Config Help - See http://wiki.inspircd.org/Modules/hostchange #
# #
#<host suffix="polarbears.org" separator="." prefix="">
#<hostchange mask="*@fbi.gov" action="addnick">
# http stats module: Provides basic stats pages over HTTP
# Requires m_httpd.so to be loaded for it to function.
#<module name="m_httpd_stats.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-#
-#<httpstats stylesheet="http://remote.style/sheet.css">
-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support
# the user in a 'connecting' state until the lookup is complete. #
# The bind value indicates which IP to bind outbound requests to. #
# #
-#<ident timeout="5" bind="">
+#<ident timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite except module: Adds support for channel invite exceptions (+I)
# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
# opers are still able to see invisible users, and if an oper with +Q
# deopers, they will become visible.
-#
-# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you
-# must first add the value canquiet="yes" to that oper's type tag.
#
-# This module is oper-only.
+# This module is oper-only and seen by many to be quite abusive.
#
#<module name="m_invisible.so">
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_mssql.so is more complex than described here, see wiki for more #
-# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module #
+# info http://wiki.inspircd.org/Modules/mssql #
#
#<database name="db" username="user" password="pass" hostname="localhost" id="db1">
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_mysql.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+# more: http://wiki.inspircd.org/Modules/mysql #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
# This is supported by mIRC, x-chat, klient, and maybe more.
#<module name="m_namesx.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# National characters module:
+# 1) Allows using national characters in nicknames.
+# 2) Allows using custom (national) casemapping over the network.
+# file -- filename of existing file in "locales" directory
+# casemapping -- custom value for 005 numeric (if you want it to be
+# different from the filename.
+#
+#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink">
+#<module name="m_nationalchars.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
# Provides channel mode +F.
#<module name="m_nicklock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No ctcp module: Adds the channel mode +C to block CTCPs
+# No ctcp module: Adds the channel mode +C to block CTCPs and extban C
+# to block CTCPs sent by specific users.
#<module name="m_noctcp.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No kicks module: Adds the +Q channel mode
+# No kicks module: Adds the +Q channel mode and the Q: extban to deny
+# certain users from kicking.
#<module name="m_nokicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<module name="m_nopartmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No Notice module: adds the channel mode +T
+# No Notice module: adds the channel mode +T and the extban T to block
+# specific users from noticing the channel.
#<module name="m_nonotice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper channels mode: Adds the +O channel mode
-# This module is oper-only.
-#<module name="m_operchans.so">
+# Network buisness join module
+# Allows an oper to join a channel using /OJOIN, giving them +Y on the
+# channel which makes them immune to kick/deop/etc.
+#<module name="m_ojoin.so">
+#
+#<ojoin prefix="!" notice="yes" op="yes">
+# Specify the prefix that +Y will grant here
+# Leave prefix empty if you do not wish +Y to grant a prefix
+# If notice is set to on, upon ojoin, the server will notice
+# the channel saying that the oper is joining on network business
+# If op is set to on, it will give them +o along with +Y
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper invex/extban module: Adds +beI type O, to ban, exempt, and invex
-# given oper type masks.
+# Oper channels mode: Adds the +O channel mode and +beI type O:<mask>
+# to ban, exempt, and invex given oper type masks.
# e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you
# may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins.
# +be work in a similar fashion.
-# This module is oper-only.
#
-#<module name="m_operinvex.so">
+#<module name="m_operchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper Join module: Auto-joins opers to a channel upon oper-up
# #
# If you are using the m_opermotd.so module, specify the motd here #
# #
-#<opermotd file="oper.motd">
+# onoper - Should the message be sent on /OPER or only when #
+# /OPERMOTD is used. Use "yes" or "no". #
+# #
+#<opermotd file="oper.motd" onoper="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# m_override.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/Oper_Override_Module #
+# http://wiki.inspircd.org/Modules/override #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper levels module: Gives each oper a level and prevents
# This module is oper-only.
#<module name="m_permchannels.so">
#
+# If you like, m_permchannels can write a config file of permanent channels
+# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
+# If you want to do this, set the filename below, and uncomment the include.
+#
+# The conf file generated has a path relative to the inspircd binary, hence '../conf/'.
+#
+#<permchanneldb filename="../conf/permchannels.conf">
+#<include file="permchannels.conf">
+#
# You may also create channels on startup by using the <permchannels> block.
#<permchannels channel="#opers" modes="is" topic="Opers only.">
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_pgsql.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+# more: http://wiki.inspircd.org/Modules/pgsql #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Registered users only channel creation
# Allows only registered users and opers to create new channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
#<module name="m_regonlycreate.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<module name="m_remove.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels
+# Restricted channels module: Allows only opers to create channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
#<module name="m_restrictchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers
+# Restrict message module: Allows users to only message opers.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
#<module name="m_restrictmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# RPC test module: A test of the RPC API
#<module name="m_rpctest.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Provide /LIST throttling (to prevent flooding) and /LIST safety to
-# prevent excess flood when the list is large.
-#<module name="m_safelist.so">
-#
-#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# When using Safelist, you may set the following values;
-#
-# The first value, 'throttle', sets the amount of time in seconds a user
-# must wait between LIST commands. For example, if this is set to 60
-# (the default) then the user may not /LIST more than once a minute.
-# If not defined, the default value is 60 seconds.
-#
-# The second value, 'maxlisters', indicates the maximum number of users
-# which may be retrieving a LIST at once. It is not recommended you raise
-# this value, as increasing it too high can make your network vulnerable
-# to floodbots which waste your bandwidth and CPU time with LIST requests.
-#
-#<safelist throttle="60" maxlisters="50">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
# This module is oper-only.
# To use, SAJOIN must be in one of your oper class blocks.
#<module name="m_sajoin.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAKICK module: Adds the /SAKICK command
+# This module is oper-only.
+# To use, SAKICK must be in one of your oper class blocks.
+#<module name="m_sakick.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAMODE module: Adds the oper /SAMODE command
# This module is oper-only.
# perform. It should be noted that if a shunned user issues QUIT or PART
# then their message will be removed, as if they did not issue one.
#
-# You may also (optionally) let the user know that their command was blocked.
-#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes">
+# You can (optionally) let the user know that their command was blocked.
+#
+# You may also let SHUN affect opers (defaults to no).
+#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spy module: Provides the ability to see the complete names list of
# does not do anything useful without a working SSL module (see below)
#<module name="m_sslmodes.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Dummy ssl module: If you have other servers on your network which
-# have SSL, but your server does not have ssl enabled, you should load
-# this module, which will handle SSL metadata (e.g. the "Is using ssl"
-# field in the WHOIS information).
-#<module name="m_ssl_dummy.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
# if enabled. You must copy the source for this module from the directory
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
+# http://wiki.inspircd.org/Modules/ssl_gnutls #
# #
# NOTE: If you want to use this module to encrypt and sign your #
# server to server traffic, you MUST load it before m_spanningtree in #
# SSL Info module: Allows users to retrieve information about other
# user's peer SSL certificates and keys. This can be used by client
# scripts to validate users. For this to work, one of m_ssl_gnutls.so
-# or m_ssl_openssl.so must be loaded. You must symlink the source for
-# this module from the directory src/modules/extra.
-# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sslinfo.cpp
-# and run make install, then uncomment this module to enable it.
+# or m_ssl_openssl.so must be loaded. This module also adds the
+# "* <user> is using a secure connection" whois line, the ability for
+# opers to use SSL fingerprints to verify their identity and the ability
+# to force opers to use SSL connections in order to oper up.
+# It is highly recommended to load this module especially if
+# you use SSL on your network.
+# For how to use the oper features, please see the first example <oper> tag
+# in opers.conf.example.
#
#<module name="m_sslinfo.so">
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_openssl.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
+# http://wiki.inspircd.org/Modules/ssl_openssl #
# #
# NOTE: If you want to use this module to encrypt and sign your #
# server to server traffic, you MUST load it before m_spanningtree in #
# your configuration file! #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
-# stored within their SSL certificate and key pair.
-# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
-# be loaded. An extra value should be added to enabled opers, which
-# is in the following format: fingerprint="<hash>". For more information,
-# see the example in the oper blocks.
-# This module is oper-only.
-#<module name="m_ssl_oper_cert.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip colour module: Adds the channel mode +S
#<module name="m_stripcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_sqlite.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
+# more: http://wiki.inspircd.org/Modules/sqlite3 #
#
#<database hostname="/full/path/to/database.db" id="anytext">
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_sqlauth.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/SQL_Authentication_Module #
+# http://wiki.inspircd.org/Modules/sqlauth #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL logging module: Allows you to log network-wide data for your
# #
# dbid - Database ID to use (see m_sql) #
# #
-# See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
+# See also: http://wiki.inspircd.org/Modules/sqllog #
# #
#<sqllog dbid="1">
# dbid - Database ID to use (see m_sql) #
# hash - Hashing provider to use for password hashing #
# #
-# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
+# See also: http://wiki.inspircd.org/Modules/sqloper #
# #
#<sqloper dbid="1" hash="md5">
#<module name="m_swhois.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Taxonomy module: Adds the /TAXONOMY command, used to view all
-# metadata attached to a user.
-# This module is oper-only.
-# To use, TAXONOMY must be in one of your oper class blocks.
-#<module name="m_taxonomy.so">
+# Test module: enable this to create a command useful in testing
+# flood control. To avoid accidental use on live networks, the server
+# name must contain ".test" to load the module
+#<module name="m_testnet.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test command module: Does nothing significant. Read: pointless.
-#<module name="m_testcommand.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Timed bans module: Adds timed bans and the /TBAN command
-# This module is oper-only.
-# To use, TBAN must be in one of your oper class blocks.
+# Timed bans module: Adds timed channel bans and the /TBAN command
#<module name="m_timedbans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# user - Username for the vhost. #
# #
# pass - Password for the vhost. #
+# #
+# hash - The hash for the specific user (optional)
+# m_password_hash.so and a hashing module must be loaded for this to work
# #
# host - Vhost to set. #
#
#<vhost user="some_username" pass="some_password" host="some.host">
+#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
#
#<module name="m_ziplink.so">
#
-# To use this module, you must enable it as a transport type in your
-# <link> tags or <bind> tags using the transport name 'zip'.
+# To use this module, you must enable it as a ssl type in your
+# <link> tags or <bind> tags using the ssl name 'ziplinks'.
# See the documentation of <link> and <bind>, respectively.
#
projects / user / henk / code / inspircd.git / blobdiff