# #
# By default, ALL modules are commented out. You must uncomment them #
# or add lines to your config to load modules. Please refer to #
-# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
+# http://wiki.inspircd.org/Modules for a list of modules and #
# each modules link for any additional conf tags they require. #
# #
# You may use wildcards in a <module> tag to load all modules which #
#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
# #
# Optional - If you specify to use the m_censor module, then you must #
# specify some censor tags. See also: #
-# http://www.inspircd.org/wiki/Censor_Module #
+# http://wiki.inspircd.org/Modules/censor #
#
#<include file="censor.conf">
# Optional - If you specify to use m_cgiirc, then you must specify one
# or more cgihost tags which indicate authorised CGI:IRC servers which
# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module
+# For more information see: http://wiki.inspircd.org/Modules/cgiirc
#
# Set to yes if you want to notice opers when CGI clients connect
# <cgiirc opernotice="no">
# Channel filter module: Allows channel-op defined message
# filtering using simple string matches (channel mode +g)
#<module name="m_chanfilter.so">
+#
+# If hidemask is set to yes, the user will not be shown the mask when
+# his/her message is blocked.
+#<chanfilter hidemask="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel logging module: used to send snotice output to channels, to
#<module name="m_chanprotect.so">
<chanprotect
- # noservices: With this set to no, when a user joins a empty channel,
- # the server will set +q on them. If set to yes, it will only set +o
+ # noservices: With this set to yes, when a user joins a empty channel,
+ # the server will set +q on them. If set to no, it will only set +o
# on them until they register the channel.
noservices="no"
# CHGHOST module: Adds the /CHGHOST command
# This module is oper-only.
# To use, CHGHOST must be in one of your oper class blocks.
+# NOTE: Services will not be able to set vhosts on users if this module
+# isn't loaded. If you're planning on running services, you probably
+# want to load this.
#<module name="m_chghost.so">
#
#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
#<module name="m_dnsbl.so"> #
# #
# For configuration options please see the wiki page for m_dnsbl at #
-# http://inspircd.org/wiki/DNS_Blacklist_Module #
+# http://wiki.inspircd.org/Modules/dnsbl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides message filtering, similar to SPAMFILTER.
# GeoIP module: Allows the server admin to ban users by country code.
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp
# and run make install, then uncomment this module to enable it.
+# This module requires GeoIP to be installed on your system,
+# use your package manager to find the appropriate packages
+# or check the InspIRCd wiki page for this module.
#<module name="m_geoip.so">
#
#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you choose to use the m_hostchange.so module. #
-# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
+# Config Help - See http://wiki.inspircd.org/Modules/hostchange #
# #
#<host suffix="polarbears.org" separator="." prefix="">
#<hostchange mask="*@fbi.gov" action="addnick">
# opers are still able to see invisible users, and if an oper with +Q
# deopers, they will become visible.
#
-# This module is oper-only.
+# This module is oper-only and seen by many to be quite abusive.
#
#<module name="m_invisible.so">
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_mssql.so is more complex than described here, see wiki for more #
-# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module #
+# info http://wiki.inspircd.org/Modules/mssql #
#
#<database name="db" username="user" password="pass" hostname="localhost" id="db1">
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_mysql.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+# more: http://wiki.inspircd.org/Modules/mysql #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# m_override.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/Oper_Override_Module #
+# http://wiki.inspircd.org/Modules/override #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper levels module: Gives each oper a level and prevents
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_pgsql.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+# more: http://wiki.inspircd.org/Modules/pgsql #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Registered users only channel creation
# Allows only registered users and opers to create new channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
#<module name="m_regonlycreate.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<module name="m_remove.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels
+# Restricted channels module: Allows only opers to create channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
#<module name="m_restrictchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers
+# Restrict message module: Allows users to only message opers.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
#<module name="m_restrictmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# does not do anything useful without a working SSL module (see below)
#<module name="m_sslmodes.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Dummy ssl module: If you have other servers on your network which
-# have SSL, but your server does not have ssl enabled, you should load
-# this module, which will handle SSL metadata (e.g. the "Is using ssl"
-# field in the WHOIS information).
-#<module name="m_ssl_dummy.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
# if enabled. You must copy the source for this module from the directory
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
+# http://wiki.inspircd.org/Modules/ssl_gnutls #
# #
# NOTE: If you want to use this module to encrypt and sign your #
# server to server traffic, you MUST load it before m_spanningtree in #
# SSL Info module: Allows users to retrieve information about other
# user's peer SSL certificates and keys. This can be used by client
# scripts to validate users. For this to work, one of m_ssl_gnutls.so
-# or m_ssl_openssl.so must be loaded. You must symlink the source for
-# this module from the directory src/modules/extra.
-# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sslinfo.cpp
-# and run make install, then uncomment this module to enable it.
+# or m_ssl_openssl.so must be loaded. This module also adds the
+# "* <user> is using a secure connection" whois line, the ability for
+# opers to use SSL fingerprints to verify their identity and the ability
+# to force opers to use SSL connections in order to oper up.
+# It is highly recommended to load this module especially if
+# you use SSL on your network.
+# For how to use the oper features, please see the first example <oper> tag
+# in opers.conf.example.
#
#<module name="m_sslinfo.so">
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_openssl.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
+# http://wiki.inspircd.org/Modules/ssl_openssl #
# #
# NOTE: If you want to use this module to encrypt and sign your #
# server to server traffic, you MUST load it before m_spanningtree in #
# your configuration file! #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
-# stored within their SSL certificate and key pair.
-# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
-# be loaded. An extra value should be added to enabled opers, which
-# is in the following format: fingerprint="<hash>". For more information,
-# see the example in the oper blocks.
-# This module is oper-only.
-#<module name="m_ssl_oper_cert.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip colour module: Adds the channel mode +S
#<module name="m_stripcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_sqlite.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
+# more: http://wiki.inspircd.org/Modules/sqlite3 #
#
#<database hostname="/full/path/to/database.db" id="anytext">
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_sqlauth.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/SQL_Authentication_Module #
+# http://wiki.inspircd.org/Modules/sqlauth #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL logging module: Allows you to log network-wide data for your
# #
# dbid - Database ID to use (see m_sql) #
# #
-# See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
+# See also: http://wiki.inspircd.org/Modules/sqllog #
# #
#<sqllog dbid="1">
# dbid - Database ID to use (see m_sql) #
# hash - Hashing provider to use for password hashing #
# #
-# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
+# See also: http://wiki.inspircd.org/Modules/sqloper #
# #
#<sqloper dbid="1" hash="md5">
#<module name="m_testcommand.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Timed bans module: Adds timed bans and the /TBAN command
-# This module is oper-only.
-# To use, TBAN must be in one of your oper class blocks.
+# Timed bans module: Adds timed channel bans and the /TBAN command
#<module name="m_timedbans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
projects / user / henk / code / inspircd.git / blobdiff