$config{CC} = "g++"; # C++ compiler
$config{MAKEORDER} = "ircd mods config bininst"; # build order
$config{STATICLIBS} = ""; # library archive path
+$config{MAX_IDENT} = "12"; # max ident size
+$config{MAX_QUIT} = "255"; # max quit message size
+$config{MAX_TOPIC} = "307"; # max topic size
+$config{MAX_KICK} = "255"; # max kick message size
+$config{MAX_GECOS} = "128"; # max GECOS size
+$config{MAX_AWAY} = "200"; # max AWAY size
if ((!$config{OSNAME}) || ($config{OSNAME} eq "")) {
chomp($config{OSNAME} = `/usr/bin/uname`);
Your operating system is: \033[1;32m$config{OSNAME}\033[0m ($wholeos), fdmax: $config{MAX_CLIENT_T}\n\n";
+$config{CHANGE_COMPILER} = "n";
+print "I have detected the following compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.$config{GCC34}\033[0m)\n";
+
+if ($config{GCCVER} < 3)
+{
+ print "\033[1;32mIMPORTANT!\033[0m A GCC 2.x compiler has been detected, and
+should NOT be used. You should probably specify a newer compiler.\n";
+}
+yesno(CHANGE_COMPILER,"Do you want to change the compiler?");
+if ($config{CHANGE_COMPILER} =~ /y/i)
+{
+ print "What command do you want to use to invoke your compiler?\n";
+ print "[\033[1;32m$config{CC}\033[0m] -> ";
+ chomp($config{CC} = <STDIN>);
+ if ($config{CC} eq "") { $config{CC} = "g++"; }
+ chomp($foo = `$config{CC} -dumpversion | cut -c 1`);
+ if ($foo ne "") {
+ chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change
+ chomp($config{GCC34} = `$config{CC} -dumpversion | cut -c 3`); # the compiler path
+ print "Queried compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.$config{GCC34}\033[0m)\n";
+ }
+ else
+ {
+ print "\033[1;32mWARNING!\033[0m Could not execute the compiler you specified. You may want to try again.\n";
+ }
+}
+
+print "\n";
+
# Directory Settings..
dir_check("are the configuration files", "CONFIG_DIR");
dir_check("are the modules to be compiled to", "MODULE_DIR");
print "not to enable one. Defaulting to select() engine.\n\n";
}
+print "\nThe following questions will ask you for various figures relating\n";
+print "To your IRCd install. Please note that these should usually be left\n";
+print "as defaults unless you have a real reason to change them. If they\n";
+print "changed, then the values must be identical on all servers on your\n";
+print "network, or malfunctions and/or crashes may occur, with the exception\n";
+print "of the 'maximum number of clients' setting which may be different on\n";
+print "different servers on the network.\n\n";
+
# File Descriptor Settings..
my $continue = 0;
while (!$continue) {
}
}
-my $continue = 0;
+$continue = 0;
while (!$continue) {
print "What is the maximum length of channel names?\n";
print "[\033[1;32m$config{CHAN_LENGT}\033[0m] -> ";
}
}
-my $continue = 0;
+$continue = 0;
while (!$continue) {
print "What is the maximum number of channels a user may join at any one time?\n";
print "[\033[1;32m$config{MAX_CHANNE}\033[0m] -> ";
}
}
-
-my $continue = 0;
+$continue = 0;
while (!$continue) {
print "What is the maximum number of mode changes in one line?\n";
print "[\033[1;32m$config{MAXI_MODES}\033[0m] -> ";
}
}
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of an ident (username)?\n";
+ print "[\033[1;32m$config{MAX_IDENT}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") { $var = $config{MAX_IDENT}; }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_IDENT} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of a quit message?\n";
+ print "[\033[1;32m$config{MAX_QUIT}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") { $var = $config{MAX_QUIT}; }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_QUIT} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of a channel topic?\n";
+ print "[\033[1;32m$config{MAX_TOPIC}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") { $var = $config{MAX_TOPIC}; }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_TOPIC} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of a kick message?\n";
+ print "[\033[1;32m$config{MAX_KICK}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") { $var = $config{MAX_KICK}; }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_KICK} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of a GECOS (real name) field?\n";
+ print "[\033[1;32m$config{MAX_GECOS}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") { $var = $config{MAX_GECOS}; }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_GECOS} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of an away message?\n";
+ print "[\033[1;32m$config{MAX_AWAY}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") { $var = $config{MAX_AWAY}; }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_AWAY} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
# Code Optimisation
-print "Enter the Level Of Binary optimisation. This is a number between 0 and 3 (inclusive)
-The InspIRCd Team will _NOT_ support any bug reports above 0.
-Also note, the IRCd behaviour will be different depending on this value.
-Please read the documentation for more information.
+print "Enter the Level Of Binary optimisation. This is a number between 0 and 3.
+The InspIRCd Team will NOT support any bug reports above 0. Also note,
+the IRCd behaviour will be different depending on this value. Please
+read the documentation for more information.
+
+The higher the number, the more optimised your binary will be. This
+value will default to 0 if you either don't enter a number, or enter
+a value outside the range.
-The Higher the number, the more optimised your binary will be. This value will default to 0
-If you either a) Dont enter a number, or b) Enter a value outside the range.\n";
+As always, if you are unsure, just press enter and accept the default.\n\n";
print "[\033[1;32m$config{OPTIMITEMP}\033[0m] -> ";
chomp($var = <STDIN>);
if ($var eq "") {
print "\033[0mConfig path:\033[1;32m\t\t\t$config{CONFIG_DIR}\n";
print "\033[0mModule path:\033[1;32m\t\t\t$config{MODULE_DIR}\n";
print "\033[0mMax connections:\033[1;32m\t\t$config{MAX_CLIENT}\n";
-print "\033[0mMax User Channels\033[1;32m\t\t$config{MAX_CHANNE}\n";
+print "\033[0mMax User Channels:\033[1;32m\t\t$config{MAX_CHANNE}\n";
print "\033[0mMax nickname length:\033[1;32m\t\t$config{NICK_LENGT}\n";
print "\033[0mMax channel length:\033[1;32m\t\t$config{CHAN_LENGT}\n";
print "\033[0mMax mode length:\033[1;32m\t\t$config{MAXI_MODES}\n";
+print "\033[0mMax ident length:\033[1;32m\t\t$config{MAX_IDENT}\n";
+print "\033[0mMax quit length:\033[1;32m\t\t$config{MAX_QUIT}\n";
+print "\033[0mMax topic length:\033[1;32m\t\t$config{MAX_TOPIC}\n";
+print "\033[0mMax kick length:\033[1;32m\t\t$config{MAX_KICK}\n";
+print "\033[0mMax name length:\033[1;32m\t\t$config{MAX_GECOS}\n";
+print "\033[0mMax away length:\033[1;32m\t\t$config{MAX_AWAY}\n";
print "\033[0mGCC Version Found:\033[1;32m\t\t$config{GCCVER}.$config{GCC34}\n";
print "\033[0mOptimatizaton Flag:\033[1;32m\t\t$config{OPTIMISATI}\033[0m\n";
print "\033[0mCompiler program:\033[1;32m\t\t$config{CC}\033[0m\n";
FOO
}
+if ($config{GCCVER} < "3") {
+ print <<FOO2;
+\033[1;32mWARNING!\033[0m You are attempting to compile InspIRCd on GCC 2.x!
+GCC 2.x series compilers only had partial (read as broken) C++ support, and
+your compile will most likely fail horribly! If you have any problems, do NOT
+report them to the bugtracker or forums without first upgrading your compiler
+to a newer 3.x or 4.x (or whatever is available currently) version.
+FOO2
+}
+
################################################################################
# HELPER FUNCTIONS #
################################################################################
sub getosflags {
if ($config{OSNAME} =~ /BSD$/) {
$config{LDLIBS} = "-Ldl";
- $config{FLAGS} = "-fPIC -frtti $OPTIMISATI -Woverloaded-virtual $config{OPTIMISATI}";
+ $config{FLAGS} = "-fPIC -frtti $OPTIMISATI -Wall -Woverloaded-virtual $config{OPTIMISATI}";
$config{MAKEPROG} = "gmake";
if ($config{OSNAME} eq "OpenBSD") {
chomp($foo = `eg++ -dumpversion | cut -c 1`);
}
} else {
$config{LDLIBS} = "-ldl";
- $config{FLAGS} = "-fPIC -frtti $OPTIMISATI -Woverloaded-virtual $config{OPTIMISATI}";
+ $config{FLAGS} = "-fPIC -frtti $OPTIMISATI -Wall -Woverloaded-virtual $config{OPTIMISATI}";
$config{MAKEPROG} = "make";
if ($config{OSNAME} =~ /CYGWIN/) {
- $config{FLAGS} = "-frtti $OPTIMISATI -Woverloaded-virtual $config{OPTIMISATI}";
+ $config{FLAGS} = "-frtti $OPTIMISATI -Wall -Woverloaded-virtual $config{OPTIMISATI}";
$config{LDLIBS} = "";
$config{MAKEPROG} = "/usr/bin/make";
$config{MAKEORDER} = "mods ircd config bininst";
my $CL = $config{CHAN_LENGT}+1;
print FILEHANDLE <<EOF;
/* Auto generated by configure, do not modify! */
+#ifndef __CONFIGURATION_AUTO__
+#define __CONFIGURATION_AUTO__
+
#define CONFIG_FILE "$config{CONFIG_DIR}/inspircd.conf"
#define MOD_PATH "$config{MODULE_DIR}"
#define VERSION "$version"
#define CHANMAX $CL
#define MAXCHANS $config{MAX_CHANNE}
#define MAXMODES $config{MAXI_MODES}
+#define IDENTMAX $config{MAX_IDENT}
+#define MAXQUIT $config{MAX_QUIT}
+#define MAXTOPIC $config{MAX_TOPIC}
+#define MAXKICK $config{MAX_KICK}
+#define MAXGECOS $config{MAX_GECOS}
+#define MAXAWAY $config{MAX_AWAY}
#define OPTIMISATION $config{OPTIMITEMP}
#define SYSTEM "$incos"
#define MAXBUF 514
}
if ($config{OSNAME} =~ /CYGWIN/) {
print FILEHANDLE "#define IS_CYGWIN\n";
+ print FILEHANDLE "#ifndef FD_SETSIZE\n#define FD_SETSIZE 1024\n#endif\n";
}
if ($config{STATIC_LINK} eq "yes") {
print FILEHANDLE "#define STATIC_LINK\n";
if (!$use_hiperf) {
print FILEHANDLE "#define USE_SELECT\n";
}
+ print FILEHANDLE "\n#endif\n";
close(FILEHANDLE);
# Create a Modules List..
projects / user / henk / code / inspircd.git / blobdiff