#
###################################################
-require 5.8.0;
+BEGIN {
+ require 5.8.0;
+}
+
+use strict;
+use warnings FATAL => qw(all);
+
+use Data::Dumper;
+BEGIN {
+ $Data::Dumper::Sortkeys = 1;
+ $Data::Dumper::Useqq = 1;
+};
+
+use File::Copy ();
+
use Socket;
use Cwd;
use Getopt::Long;
# If you wish to ignore a dependency throughout the entire core, add it here.
-my @ignoredeps = (
+our @ignoredeps = (
"inspircd_win32wrapper.h", # windows has its own configure program
);
# If you wish for all files in the entire core to have a given dependency, insert it here.
# You should keep this to an absolute minimum to avoid rebuilds that are not neccessary.
-my @immutabledeps = (
+our @immutabledeps = (
"inspircd_config.h", # auto re-generated by configure
"inspircd.h",
);
# List of commands that make up 'make install' and 'make deinstall'
-my $install_list = "";
-my $uninstall_list = "";
+our $install_list = "";
+our $uninstall_list = "";
# This is a list of all files in the core. Each cpp file is mapped to a shared object file,
# whos file extension is omitted (these can vary from system to system). Auto detected by
# scanning the src/*.cpp files for files containing /* $Core: */ identifiers.
-my %filelist = ();
+our %filelist = ();
# If you wish for a file to have special dependencies in the makefile, add an entry here.
# Auto populated by /* $ExtraDeps: */ instruction
-my %specialdeps = ();
+our %specialdeps = ();
# If you wish for a file to have extra make lines (in between the compile and link steps)
# then insert them here.
# Auto populated by /* $ExtraBuild: */ instruction
-my %extrabuildlines = ();
+our %extrabuildlines = ();
# If you wish for a file to be linked against extra objects or arctives, insert them here.
# Auto populated by /* $ExtraObjects: */ instruction
-my %extraobjects = ();
+our %extraobjects = ();
# If you wish to compile extra cpp sources into an object, define them here.
# NOTE: Certain cpp files such as the socket engines have a value auto calculated
# for this table so that their derived class is built.
# Auto populated by /* $ExtraSources: */ instruction
-my %extrasources = ();
+our %extrasources = ();
+
+our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_nick_length,
+ $opt_chan_length, $opt_maxclients, $opt_ports, $opt_epoll, $opt_kqueue, $opt_noports,
+ $opt_noepoll, $opt_nokqueue, $opt_disablerpath, $opt_ipv6, $opt_ipv6links,
+ $opt_noipv6links, $opt_ident, $opt_quit, $opt_topic, $opt_maxbuf, $opt_kick,
+ $opt_gecos, $opt_away, $opt_modes, $opt_disable_debug, $opt_maxchans,
+ $opt_opermaxchans);
+
+our ($opt_cc, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir,
+ $opt_library_dir);
+
+sub list_extras ();
+
+sub enable_extras (@);
+sub disable_extras (@);
+
+my @opt_enableextras;
+my @opt_disableextras;
GetOptions (
'enable-gnutls' => \$opt_use_gnutls,
'disable-ports' => \$opt_noports,
'disable-epoll' => \$opt_noepoll,
'disable-kqueue' => \$opt_nokqueue,
+ 'disable-rpath' => \$opt_disablerpath,
'enable-ipv6' => \$opt_ipv6,
'enable-remote-ipv6' => \$opt_ipv6links,
'disable-remote-ipv6' => \$opt_noipv6links,
'update' => sub { update(); },
'svnupdate' => sub { svnupdate(); },
'clean' => sub { clean(); },
+ 'list-extras' => sub { list_extras; exit 0; }, # This, --enable-extras, and --disable-extras are for non-interactive managing.
+ 'enable-extras=s@' => \@opt_enableextras, # ^
+ 'disable-extras=s@' => \@opt_disableextras, # ^
);
-my $non_interactive = (
+if (scalar(@opt_enableextras) + scalar(@opt_disableextras) > 0) {
+ @opt_enableextras = split /,/, join(',', @opt_enableextras);
+ @opt_disableextras = split /,/, join(',', @opt_disableextras);
+ enable_extras(@opt_enableextras);
+ disable_extras(@opt_disableextras);
+ list_extras;
+ print "Remember: YOU are responsible for making sure any libraries needed have been installed!\n";
+ print "Run $0 -modupdate after you've done this to update the makefiles.\n";
+ exit 0;
+}
+
+our $non_interactive = (
(defined $opt_library_dir) ||
(defined $opt_base_dir) ||
(defined $opt_config_dir) ||
(defined $opt_maxbuf) ||
(defined $opt_use_gnutls)
);
-my $interactive = !$non_interactive;
+our $interactive = !$non_interactive;
-
-chomp($topdir = getcwd());
-$this = resolve_directory($topdir); # PWD, Regardless.
-@modlist = (); # Declare for Module List..
-%config = (); # Initiate Configuration Hash..
+chomp(our $topdir = getcwd());
+our $this = resolve_directory($topdir); # PWD, Regardless.
+our @modlist = (); # Declare for Module List..
+our %config = (); # Initiate Configuration Hash..
$config{ME} = resolve_directory($topdir); # Present Working Directory
$config{BASE_DIR} = $config{ME};
}
chomp($config{HAS_GNUTLS} = `libgnutls-config --version 2>/dev/null | cut -c 1,2,3`); # GNUTLS Version.
chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version
-chomp($gnutls_ver = $config{HAS_GNUTLS});
-chomp($openssl_ver = $config{HAS_OPENSSL});
+chomp(our $gnutls_ver = $config{HAS_GNUTLS});
+chomp(our $openssl_ver = $config{HAS_OPENSSL});
$config{USE_GNUTLS} = "n";
if (defined $opt_use_gnutls)
{
{
$config{CC} = $opt_cc;
}
-$exec = $config{CC} . " -dumpversion | cut -c 1";
+our $exec = $config{CC} . " -dumpversion | cut -c 1";
chomp($config{GCCVER} = `$exec`); # Major GCC Version
$config{MAKEORDER} = "ircd mods"; # build order
$config{MAX_IDENT} = "12"; # max ident size
$config{MAX_AWAY} = $opt_away;
}
-$config{HAS_OPENSSL} =~ /^([-[:digit:].]+)([a-z])?(\-[a-z][0-9])?$/;
-$config{HAS_OPENSSL} = $1;
+if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)([a-z])?(\-[a-z][0-9])?$/) {
+ $config{HAS_OPENSSL} = $1;
+} else {
+ $config{HAS_OPENSSL} = "";
+}
if ($config{GCCVER} eq "") {
print $config{CC} . " was not found! You require g++ (the GNU C++ compiler, part of GCC) to build InspIRCd!\n";
exit;
}
+our $fd_scan_fail = "";
if (!$config{MAX_CLIENT_T}) {
$config{MAX_CLIENT_T} = 1024; # Set a reasonable 'Default'
$fd_scan_fail = "true"; # Used Later
sub clean
{
- system("rm -rf .config.cache");
+ unlink(".config.cache");
}
+our ($has_epoll, $has_ports, $has_kqueue) = (0, 0, 0);
+
sub update
{
eval {
exit 0;
} else {
# We've Loaded the cache file and all our variables..
- print "Updating Files..\n";
+ print "Updating files...\n";
getosflags();
- if ($opt_disable_debug == 1)
+ if (defined($opt_disable_debug) && $opt_disable_debug == 1)
{
print "Disabling debug information (-g).\n";
$config{OPTIMISATI} = "";
exit 0;
} else {
# We've Loaded the cache file and all our variables..
- print "Updating Files..\n";
+ print "Updating files...\n";
getosflags();
$has_epoll = $config{HAS_EPOLL};
$has_ports = $config{HAS_PORTS};
printf "Checking if stdint.h exists... ";
$config{HAS_STDINT} = "true";
-my $fail = 0;
+our $fail = 0;
open(STDINT, "</usr/include/stdint.h") or $config{HAS_STDINT} = "false";
if ($config{HAS_STDINT} eq "true") {
close(STDINT);
print "yes\n" if $config{HAS_STDINT} eq "true";
print "no\n" if $config{HAS_STDINT} eq "false";
-
printf "Checking if strlcpy exists... ";
# Perform the strlcpy() test..
$config{HAS_STRLCPY} = "false";
-my $fail = 0;
+$fail = 0;
open(STRLCPY, "</usr/include/string.h") or $fail = 1;
if (!$fail) {
- while (chomp($line = <STRLCPY>)) {
+ while (defined(my $line = <STRLCPY>)) {
+ chomp($line);
# try and find the delcaration of:
# size_t strlcpy(...)
if ($line =~ /size_t(\0x9|\s)+strlcpy/) {
print "yes\n" if $config{HAS_STRLCPY} eq "true";
print "no\n" if $config{HAS_STRLCPY} eq "false";
-
printf "Checking if kqueue exists... ";
$has_kqueue = 0;
$fail = 0;
open(KQUEUE, "</usr/include/sys/event.h") or $fail = 1;
if (!$fail) {
- while (chomp($line = <KQUEUE>)) {
+ while (defined(my $line = <KQUEUE>)) {
+ chomp($line);
# try and find the delcaration of:
# int kqueue(void);
if ($line =~ /int(\0x9|\s)+kqueue/) {
# against 2.4 kernels (ick)
my $kernel_arch = `uname -p`;
chomp($kernel_arch);
- $libcv = 0.0;
- $kernelv = 0.0;
+ my $libcv = 0.0;
+ my $kernelv = 0.0;
if ($kernel_arch =~ /x86_64/) {
open (FH,"/lib64/libc.so.6|") or $has_epoll = 0;
}
}
if ($has_epoll)
{
- while (chomp($line = <FH>))
+ while (defined(my $line = <FH>))
{
+ chomp($line);
if ($line =~ /GNU C Library .* version (.*?) /)
{
$libcv = $1;
printf "Checking if Solaris I/O completion ports are available... ";
$has_ports = 0;
-my $system = `uname -s`;
+our $system = `uname -s`;
chomp ($system);
$has_ports = 1 if ($system eq "SunOS");
$config{HAS_KQUEUE} = $has_kqueue;
printf "Checking for libgnutls... ";
-if (($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS} >= 1.2) || ($config{HAS_GNUTLS} eq "y"))) {
+if (defined($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS}) || ($config{HAS_GNUTLS} eq "y"))) {
print "yes\n";
$config{HAS_GNUTLS} = "y";
} else {
}
printf "Checking for openssl... ";
-if (($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL} >= 0.8) || ($config{HAS_OPENSSL} eq "y"))) {
+if (defined($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL}) || ($config{HAS_OPENSSL} eq "y"))) {
print "yes\n";
$config{HAS_OPENSSL} = "y";
} else {
printf "Checking if you are running an ancient, unsupported OS... ";
if ($config{OSNAME} =~ /FreeBSD/i)
{
- $version = `uname -r`;
+ my $version = `uname -r`;
if ($version =~ /^4\./)
{
- $foundit = `ls -l /usr/local/lib/libgnugetopt* | wc -l`;
+ my $foundit = `ls -l /usr/local/lib/libgnugetopt* | wc -l`;
if ($foundit > 0)
{
# ICKY ICKY ICK, FREEBSD 4.x! GET AN UPGRADE!
# Clear the Screen..
if ($interactive)
{
- system("clear");
- $wholeos = $^O;
+ print "\e[2J\e[0G\e[0d"; # J = Erase in Display, 2 = Entire Screen, (G, d) = Move cursor to (..,..)
+ my $wholeos = $^O;
my $rev = getrevision();
# Display Introduction Message..
- print "
-Welcome to the \033[1mInspIRCd\033[0m Configuration program! (\033[1minteractive mode\033[0m)
-\033[1mPackage maintainers: Type ./configure --help for non-interactive help\033[0m
+ print <<"STOP" ;
+Welcome to the \e[1mInspIRCd\e[0m Configuration program! (\e[1minteractive mode\e[0m)
+\e[1mPackage maintainers: Type ./configure --help for non-interactive help\e[0m
*** If you are unsure of any of these values, leave it blank for ***
*** standard settings that will work, and your server will run ***
*** using them. Please consult your IRC network admin if in doubt. ***
-Press \033[1m<RETURN>\033[0m to accept the default for any option, or enter
-a new value. Please note: You will \033[1mHAVE\033[0m to read the docs
+Press \e[1m<RETURN>\e[0m to accept the default for any option, or enter
+a new value. Please note: You will \e[1mHAVE\e[0m to read the docs
dir, otherwise you won't have a config file!
-Your operating system is: \033[1;32m$config{OSNAME}\033[0m ($wholeos)
-Maximum file descriptors: \033[1;32m$config{MAX_CLIENT_T}\033[0m
-Your InspIRCd revision ID is \033[1;32mr$rev\033[0m";
+Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
+Maximum file descriptors: \e[1;32m$config{MAX_CLIENT_T}\e[0m
+Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
+STOP
if ($rev eq "r0") {
print " (Non-SVN build)";
}
print ".\n\n";
$config{CHANGE_COMPILER} = "n";
- print "I have detected the following compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.x\033[0m)\n";
+ print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.x\e[0m)\n";
while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
- print "\033[1;32mIMPORTANT!\033[0m A GCC 2.x compiler has been detected, and
+ print "\e[1;32mIMPORTANT!\e[0m A GCC 2.x compiler has been detected, and
should NOT be used. You should probably specify a newer compiler.\n\n";
- yesno(CHANGE_COMPILER,"Do you want to change the compiler?");
+ yesno('CHANGE_COMPILER',"Do you want to change the compiler?");
if ($config{CHANGE_COMPILER} =~ /y/i) {
print "What command do you want to use to invoke your compiler?\n";
- print "[\033[1;32m$config{CC}\033[0m] -> ";
+ print "[\e[1;32m$config{CC}\e[0m] -> ";
chomp($config{CC} = <STDIN>);
if ($config{CC} eq "") {
$config{CC} = "g++";
}
- chomp($foo = `$config{CC} -dumpversion | cut -c 1`);
+ chomp(my $foo = `$config{CC} -dumpversion | cut -c 1`);
if ($foo ne "") {
chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
- print "Queried compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.x\033[0m)\n";
+ print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.x\e[0m)\n";
if ($config{GCCVER} < 3) {
- print "\033[1;32mGCC 2.x WILL NOT WORK!\033[0m. Let's try that again, shall we?\n";
+ print "\e[1;32mGCC 2.x WILL NOT WORK!\e[0m. Let's try that again, shall we?\n";
}
}
else {
- print "\033[1;32mWARNING!\033[0m Could not execute the compiler you specified. You may want to try again.\n";
+ print "\e[1;32mWARNING!\e[0m Could not execute the compiler you specified. You may want to try again.\n";
}
}
}
dir_check("are the IRCd libraries to be placed", "LIBRARY_DIR");
if ($has_kqueue) {
- yesno(USE_KQUEUE,"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
+ yesno('USE_KQUEUE',"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
print "\n";
}
if ($has_epoll) {
- yesno(USE_EPOLL,"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
+ yesno('USE_EPOLL',"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
print "\n";
}
if ($has_ports) {
- yesno(USE_PORTS,"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
+ yesno('USE_PORTS',"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
print "\n";
}
- $chose_hiperf = (($config{USE_EPOLL} eq "y") || ($config{USE_KQUEUE} eq "y") || ($config{USE_PORTS} eq "y"));
+ my $chose_hiperf = (($config{USE_EPOLL} eq "y") || ($config{USE_KQUEUE} eq "y") || ($config{USE_PORTS} eq "y"));
if (!$chose_hiperf) {
print "No high-performance socket engines are available, or you chose\n";
print "not to enable one. Defaulting to select() engine.\n\n";
}
- yesno(IPV6,"Would you like to build InspIRCd with IPv6 support?");
+ yesno('IPV6',"Would you like to build InspIRCd with IPv6 support?");
print "\n";
if ($config{IPV6} eq "y") {
- print "You have chosen to build an \033[1;32mIPV6-enabled\033[0m server.\nTo accept IPV4 users, you can still use IPV4 addresses\nin your port bindings..\n\n";
+ print "You have chosen to build an \e[1;32mIPV6-enabled\e[0m server.\nTo accept IPV4 users, you can still use IPV4 addresses\nin your port bindings..\n\n";
$config{SUPPORT_IP6LINKS} = "y";
} else {
- yesno(SUPPORT_IP6LINKS,"You have chosen to build an \033[1;32mIPV4-only\033[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers?\nIf you are using a recent operating\nsystem and are unsure, answer yes.\nIf you answer 'no' here, your InspIRCd server will be unable\nto parse IPV6 addresses (e.g. for CIDR bans)");
+ yesno('SUPPORT_IP6LINKS',"You have chosen to build an \e[1;32mIPV4-only\e[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers?\nIf you are using a recent operating\nsystem and are unsure, answer yes.\nIf you answer 'no' here, your InspIRCd server will be unable\nto parse IPV6 addresses (e.g. for CIDR bans)");
print "\n";
}
if (($config{HAS_GNUTLS} eq "y") && ($config{HAS_OPENSSL} eq "y")) {
- print "I have detected both \033[1;32mGnuTLS\033[0m and \033[1;32mOpenSSL\033[0m on your system.\n";
+ print "I have detected both \e[1;32mGnuTLS\e[0m and \e[1;32mOpenSSL\e[0m on your system.\n";
print "I will default to GnuTLS. If you wish to use OpenSSL\n";
print "instead, you should enable the OpenSSL module yourself\n";
print "by copying it from src/modules/extra to src/modules.\n\n";
- print "Detected GnuTLS version: \033[1;32m" . $gnutls_ver . "\033[0m\n";
- print "Detected OpenSSL version: \033[1;32m" . $openssl_ver . "\033[0m\n\n";
+ print "Detected GnuTLS version: \e[1;32m" . $gnutls_ver . "\e[0m\n";
+ print "Detected OpenSSL version: \e[1;32m" . $openssl_ver . "\e[0m\n\n";
}
if ($config{HAS_GNUTLS} eq "y") {
- yesno(USE_GNUTLS, "Would you like to enable SSL Support?");
+ yesno('USE_GNUTLS', "Would you like to enable SSL Support?");
if ($config{USE_GNUTLS} eq "y") {
print "\nUsing GnuTLS SSL module.\n";
}
} elsif ($config{HAS_OPENSSL} eq "y") {
- yesno(USE_OPENSSL, "Would you like to enable SSL Support?");
+ yesno('USE_OPENSSL', "Would you like to enable SSL Support?");
if ($config{USE_OPENSSL} eq "y") {
print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
}
print "Sorry, but i couldn't detect openssl. Make sure openssl is in your path.\n";
exit(0);
}
+our $failed = 0;
if ($config{USE_GNUTLS} eq "y") {
- $failed = 0;
- open(TMP, "<src/modules/m_ssl_gnutls.cpp") or $failed = 1;
- close(TMP);
- if ($failed) {
+ unless (-r "src/modules/m_ssl_gnutls.cpp") {
print "Symlinking src/modules/m_ssl_gnutls.cpp from extra/\n";
- chdir("src/modules");
- system("ln -s extra/m_ssl_gnutls.cpp");
- chdir("../..");
+ symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!";
}
getmodules();
if ($interactive)
{
- $failed = 0;
- open(TMP, "<$config{CONFIG_DIR}/key.pem") or $failed = 1;
- close(TMP);
- open(TMP, "<$config{CONFIG_DIR}/cert.pem") or $failed = 1;
- close(TMP);
- if ($failed) {
+ unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
print "SSL Certificates Not found, Generating.. \n\n
*************************************************************
* Generating the Private Key may take some time, go grab a *
*************************************************************\n\n";
$failed = make_gnutls_cert();
if ($failed) {
- print "\n\033[1;32mCertificate generation failed!\033[0m\n\n";
+ print "\n\e[1;32mCertificate generation failed!\e[0m\n\n";
} else {
print "\nCertificate generation complete, copying to config directory... ";
- system("mv key.pem $config{CONFIG_DIR}/key.pem");
- system("mv cert.pem $config{CONFIG_DIR}/cert.pem");
+ File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
+ File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
print "Done.\n\n";
}
}
print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
}
} elsif ($config{USE_OPENSSL} eq "y") {
- $failed = 0;
- open(TMP, "<src/modules/m_ssl_openssl.cpp") or $failed = 1;
- close(TMP);
- if ($failed) {
+ unless (-r "src/modules/m_ssl_openssl.cpp") {
print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
- chdir("src/modules");
- system("ln -s extra/m_ssl_openssl.cpp");
- chdir("../..");
+ symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!";
}
getmodules();
$failed = 0;
if ($interactive)
{
- open(TMP, "<$config{CONFIG_DIR}/key.pem") or $failed = 1;
- close(TMP);
- open(TMP, "<$config{CONFIG_DIR}/cert.pem") or $failed = 1;
- close(TMP);
- if ($failed) {
+ unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
print "SSL Certificates Not found, Generating.. \n\n
*************************************************************
* Generating the certificates may take some time, go grab a *
*************************************************************\n\n";
make_openssl_cert();
print "\nCertificate generation complete, copying to config directory... ";
- system("mv key.pem $config{CONFIG_DIR}/key.pem");
- system("mv cert.pem $config{CONFIG_DIR}/cert.pem");
- system("mv dhparams.pem $config{CONFIG_DIR}/dhparams.pem");
+ File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
+ File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
+ File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
print "Done.\n\n";
} else {
print "SSL Certificates found, skipping.\n\n"
makecache();
print "\n\n";
-print "To build your server with these settings, please type '\033[1;32m$config{MAKEPROG}\033[0m' now.\n";
+print "To build your server with these settings, please type '\e[1;32m$config{MAKEPROG}\e[0m' now.\n";
if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
- print "Please remember that to enable \033[1;32mSSL support\033[0m you must\n";
+ print "Please remember that to enable \e[1;32mSSL support\e[0m you must\n";
print "load the required modules in your config. This configure process\n";
print "has just prepared these modules to be compiled for you, and has not\n";
print "configured them to be compiled into the core of the ircd.\n";
}
-print "*** \033[1;32mRemember to edit your configuration files!!!\033[0m ***\n\n\n";
+print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n\n";
if (($config{OSNAME} eq "OpenBSD") && ($config{CC} ne "eg++")) {
- print "\033[1;32mWARNING!\033[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but i'm letting you\ngo ahead with it anyway, just in case i'm wrong :-)\n";
+ print "\e[1;32mWARNING!\e[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but i'm letting you\ngo ahead with it anyway, just in case i'm wrong :-)\n";
}
if ($config{GCCVER} < "3") {
print <<FOO2;
-\033[1;32mWARNING!\033[0m You are attempting to compile InspIRCd on GCC 2.x!
+\e[1;32mWARNING!\e[0m You are attempting to compile InspIRCd on GCC 2.x!
GCC 2.x series compilers only had partial (read as broken) C++ support, and
your compile will most likely fail horribly! If you have any problems, do NOT
report them to the bugtracker or forums without first upgrading your compiler
# Do something with data here!
$config{$key} = $1;
}
- close(CONFIG);
+ close(CACHE);
return 1;
}
sub makecache {
# Dump the contents of %config
- print "Writing \033[1;32mcache file\033[0m for future ./configures ...\n";
+ print "Writing \e[1;32mcache file\e[0m for future ./configures ...\n";
open(FILEHANDLE, ">.config.cache");
- foreach $key (keys %config) {
+ foreach my $key (keys %config) {
print FILEHANDLE "$key=\"$config{$key}\"\n";
}
close(FILEHANDLE);
my $complete = 0;
while (!$complete) {
print "In what directory $desc?\n";
- print "[\033[1;32m$config{$hash_key}\033[0m] -> ";
- chomp($var = <STDIN>);
+ print "[\e[1;32m$config{$hash_key}\e[0m] -> ";
+ chomp(my $var = <STDIN>);
if ($var eq "") {
$var = $config{$hash_key};
}
$var = resolve_directory($var);
if (! -e $var) {
- print "$var does not exist. Create it?\n[\033[1;32my\033[0m] ";
- chomp($tmp = <STDIN>);
+ print "$var does not exist. Create it?\n[\e[1;32my\e[0m] ";
+ chomp(my $tmp = <STDIN>);
if (($tmp eq "") || ($tmp =~ /^y/i)) {
# Attempt to Create the Dir..
-
- system("mkdir -p \"$var\" >> /dev/null 2>&1");
- $chk = system("mkdir -p \"$var\" >> /dev/null 2>&1") / 256;
- if ($chk != 0) {
+ my $chk = eval {
+ use File::Path ();
+ File::Path::mkpath($var, 0, 0777);
+ 1;
+ };
+ unless (defined($chk) && -d $var) {
print "Unable to create directory. ($var)\n\n";
# Restart Loop..
next;
}
}
+our $SHARED = "";
+
sub getosflags {
- $config{LDLIBS} = "-lstdc++";
- $config{FLAGS} = "-fPIC -Wall -pedantic $config{OPTIMISATI}";
- $config{DEVELOPER} = "-fPIC -Wall -std=c99 -pedantic -g";
- $SHARED = "-Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared";
+ # Beware: Linux sets it's own cflags below for some retarded reason
+ $config{LDLIBS} = "-pthread -lstdc++";
+ $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wall $config{OPTIMISATI}";
+ $config{DEVELOPER} = "-fPIC -Woverloaded-virtual -Wshadow -Wall -g";
+ $SHARED = "-Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared" unless defined $opt_disablerpath;
$config{MAKEPROG} = "make";
if ($config{OSNAME} =~ /darwin/i) {
- $config{FLAGS} = "-DDARWIN -frtti -fPIC -Wall -pedantic $config{OPTIMISATI}";
+ $config{FLAGS} = "-DDARWIN -frtti -fPIC -Wall $config{OPTIMISATI}";
$SHARED = "-bundle -twolevel_namespace -undefined dynamic_lookup";
- $config{LDLIBS} = "-ldl -lstdc++";
+ $config{LDLIBS} = "-ldl -pthread -lstdc++";
}
if ($config{OSNAME} =~ /OpenBSD/i) {
$config{MAKEPROG} = "gmake";
$config{LDLIBS} = $config{LDLIBS} . " -lunwind";
- chomp($foo = `eg++ -dumpversion | cut -c 1`);
+ chomp(my $foo = `eg++ -dumpversion | cut -c 1`);
# theyre running the package version of gcc (eg++)... detect it and set up its version numbers.
# if theyre not running this, configure lets the build continue but they probably wont manage to
# compile as this standard version is 2.95.3!
}
if ($config{OSNAME} =~ /Linux/i) {
- $config{LDLIBS} = "-ldl -lstdc++";
- $config{FLAGS} = "-fPIC -Wall -pedantic $config{OPTIMISATI}";
+ $config{LDLIBS} = "-ldl -lstdc++ -pthread";
+ $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wall $config{OPTIMISATI}";
$config{FLAGS} .= " " . $ENV{CXXFLAGS} if exists($ENV{CXXFLAGS});
$config{LDLIBS} .= " " . $ENV{LDLIBS} if exists($ENV{LDLIBS});
$config{MAKEPROG} = "make";
# rt = POSIX realtime extensions
# resolv = inet_aton only (why isnt this in nsl?!)
$config{MAKEPROG} = "gmake";
- $config{LDLIBS} .= " -lsocket -lnsl -lrt -lresolv";
+ $config{LDLIBS} .= " -lsocket -lnsl -lrt -lresolv -pthread";
return "Solaris";
}
return $config{OSNAME};
}
+my ($mliflags, $mfrules, $mobjs, $mfcount) = ("", "", "", 0);
+
sub writefiles {
my($writeheader) = @_;
+ my $se = "";
# First File.. inspircd_config.h
chomp(my $incos = `uname -n -s -r`);
- chomp($version = `sh src/version.sh`);
+ chomp(my $version = `sh src/version.sh`);
chomp(my $revision2 = getrevision());
if ($writeheader == 1)
{
- print "Writing \033[1;32minspircd_config.h\033[0m\n";
+ print "Writing \e[1;32minspircd_config.h\e[0m\n";
open(FILEHANDLE, ">include/inspircd_config.h");
my $NL = $config{NICK_LENGT}+1;
my $CL = $config{CHAN_LENGT}+1;
# Create a Modules List..
my $modules = "";
- foreach $i (@modlist)
+ foreach my $i (@modlist)
{
$modules .= "m_".$i.".so ";
}
chomp($modules); # Remove Redundant whitespace..
opendir(DIRHANDLE, "src/modules");
- foreach $name (sort readdir(DIRHANDLE)) {
+ foreach my $name (sort readdir(DIRHANDLE)) {
if ($name =~ /^m_(.+?)$/) {
- if (opendir(MDIRHANDLE, "src/modules/$name") != 0) {
+ if (defined(opendir(MDIRHANDLE, "src/modules/$name"))) {
closedir(MDIRHANDLE);
$modules .= "$name.so ";
$uninstall_list = $uninstall_list . " -rm \$(MODULES)/$name.so\n";
# compiled code -- we might not have the source to hand.
# Fix for bug#177 by Brain.
- chomp(my $version = `sh ./src/version.sh`);
+ chomp($version = `sh ./src/version.sh`);
chomp(my $revision = getrevision());
$version = "$version(r$revision)";
# We can actually parse any file starting with . and ending with .inc,
# but right now we only parse .inspircd.inc to form './inspircd'
- print "Writing \033[1;32mMakefiles\033[0m\n";
+ print "Writing \e[1;32mMakefiles\e[0m\n";
write_dynamic_modules_makefile();
write_dynamic_makefile();
opendir(DIRHANDLE, $this);
- foreach $name (sort readdir(DIRHANDLE)) {
+ foreach my $name (sort readdir(DIRHANDLE)) {
if ($name =~ /^\.(.+)\.inc$/) {
$file = $1;
}
close(FILEHANDLE);
- print "Writing \033[1;32m$file\033[0m ...\n";
- $tmp =~ s/\@CC\@/$config{CC}/;
- $tmp =~ s/\@MAKEPROG\@/$config{MAKEPROG}/;
- $tmp =~ s/\@FLAGS\@/$config{FLAGS}/;
- $tmp =~ s/\@DEVELOPER\@/$config{DEVELOPER}/;
- $tmp =~ s/\@LDLIBS\@/$config{LDLIBS}/;
- $tmp =~ s/\@BASE_DIR\@/$config{BASE_DIR}/;
- $tmp =~ s/\@CONFIG_DIR\@/$config{CONFIG_DIR}/;
- $tmp =~ s/\@MODULE_DIR\@/$config{MODULE_DIR}/;
- $tmp =~ s/\@BINARY_DIR\@/$config{BINARY_DIR}/;
- $tmp =~ s/\@LIBRARY_DIR\@/$config{LIBRARY_DIR}/;
- $tmp =~ s/\@MODULES\@/$modules/;
- $tmp =~ s/\@STARTSCRIPT\@/$config{STARTSCRIPT}/;
- $tmp =~ s/\@DESTINATION\@/$config{DESTINATION}/;
- $tmp =~ s/\@EXTRA_DIR\@/$config{EXTRA_DIR}/;
- $tmp =~ s/\@EXECUTABLE\@/$exe/;
- $tmp =~ s/\@MAKEORDER\@/$config{MAKEORDER}/;
- $tmp =~ s/\@VERSION\@/$version/;
- $tmp =~ s/\@INSTALL_LIST\@/$install_list/;
- $tmp =~ s/\@UNINSTALL_LIST\@/$uninstall_list/;
+ print "Writing \e[1;32m$file\e[0m ...\n";
+ $tmp =~ s/\@CC\@/$config{CC}/ if defined $config{CC};
+ $tmp =~ s/\@MAKEPROG\@/$config{MAKEPROG}/ if defined $config{MAKEPROG};
+ $tmp =~ s/\@FLAGS\@/$config{FLAGS}/ if defined $config{FLAGS};
+ $tmp =~ s/\@DEVELOPER\@/$config{DEVELOPER}/ if defined $config{DEVELOPER};
+ $tmp =~ s/\@LDLIBS\@/$config{LDLIBS}/ if defined $config{LDLIBS};
+ $tmp =~ s/\@BASE_DIR\@/$config{BASE_DIR}/ if defined $config{BASE_DIR};
+ $tmp =~ s/\@CONFIG_DIR\@/$config{CONFIG_DIR}/ if defined $config{CONFIG_DIR};
+ $tmp =~ s/\@MODULE_DIR\@/$config{MODULE_DIR}/ if defined $config{MODULE_DIR};
+ $tmp =~ s/\@BINARY_DIR\@/$config{BINARY_DIR}/ if defined $config{BINARY_DIR};
+ $tmp =~ s/\@LIBRARY_DIR\@/$config{LIBRARY_DIR}/ if defined $config{LIBRARY_DIR};
+ $tmp =~ s/\@MODULES\@/$modules/ if defined $modules;
+ $tmp =~ s/\@STARTSCRIPT\@/$config{STARTSCRIPT}/ if defined $config{STARTSCRIPT};
+ $tmp =~ s/\@DESTINATION\@/$config{DESTINATION}/ if defined $config{DESTINATION};
+ $tmp =~ s/\@EXTRA_DIR\@/$config{EXTRA_DIR}/ if defined $config{EXTRA_DIR};
+ $tmp =~ s/\@EXECUTABLE\@/$exe/ if defined $exe;
+ $tmp =~ s/\@MAKEORDER\@/$config{MAKEORDER}/ if defined $config{MAKEORDER};
+ $tmp =~ s/\@VERSION\@/$version/ if defined $version;
+ $tmp =~ s/\@INSTALL_LIST\@/$install_list/ if defined $install_list;
+ $tmp =~ s/\@UNINSTALL_LIST\@/$uninstall_list/ if defined $uninstall_list;
open(FILEHANDLE, ">$file");
print FILEHANDLE $tmp;
sub write_dynamic_modules_makefile {
# Modules Makefile..
- print "Writing \033[1;32msrc/modules/Makefile\033[0m\n";
+ print "Writing \e[1;32msrc/modules/Makefile\e[0m\n";
open(FILEHANDLE, ">src/modules/Makefile");
###
my $modules = "";
my $cmflags = "";
my $liflags = "";
- foreach $i (@modlist) {
+ foreach my $i (@modlist) {
###
# Write Entry to the MakeFile
###
$cmflags = getcompilerflags("src/modules/m_".$i.".cpp");
$liflags = getlinkerflags("src/modules/m_".$i.".cpp");
- $deps = getdependencies("src/modules/m_".$i.".cpp");
+ my $deps = getdependencies("src/modules/m_".$i.".cpp");
#print "file: $i: cmflags=$cmflags; liflags=$liflags; deps=$deps\n";
- $nicerflags = $config{FLAGS};
- $nicerflags =~ s/-pedantic//g;
-
if (nopedantic("src/modules/m_".$i.".cpp"))
{
print FILEHANDLE "
m_$i.so: m_$i.cpp ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h $deps
- \$(CC) -pipe -I../../include $nicerflags $cmflags \$(PICLDFLAGS) $liflags -export-dynamic -o m_$i.so m_$i.cpp
+ \@../../make/run-cc.pl \$(CC) -pipe -I../../include \$(NICEFLAGS) $cmflags \$(PICLDFLAGS) $liflags -export-dynamic -o m_$i.so m_$i.cpp
"
}
else
{
print FILEHANDLE "
m_$i.so: m_$i.cpp ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h $deps
- \$(CC) -pipe -I../../include \$(FLAGS) $cmflags \$(PICLDFLAGS) $liflags -export-dynamic -o m_$i.so m_$i.cpp
+ \@../../make/run-cc.pl \$(CC) -pipe -I../../include \$(FLAGS) $cmflags \$(PICLDFLAGS) $liflags -export-dynamic -o m_$i.so m_$i.cpp
";
}
$install_list = $install_list . " install -m \$(INSTMODE) src/modules/m_$i.so \$(MODPATH)\n";
}
opendir(DIRHANDLE, "src/modules");
- foreach $name (sort readdir(DIRHANDLE)) {
+ foreach my $name (sort readdir(DIRHANDLE)) {
if ($name =~ /^m_(.+?)$/) {
$mfrules = "";
$mobjs = "";
$mliflags = "";
$mfcount = 0;
# A module made of multiple files, in a dir, e.g. src/modules/m_spanningtree/
- if (opendir(MDIRHANDLE, "src/modules/$name") != 0) {
+ if (defined(opendir(MDIRHANDLE, "src/modules/$name"))) {
read_module_directory("src/modules/$name", $name);
- print "Composing Makefile rules for directory \033[1;32m$name\033[0m... (\033[1;32m$mfcount files found\033[0m)\n";
+ print "Composing Makefile rules for directory \e[1;32m$name\e[0m... (\e[1;32m$mfcount files found\e[0m)\n";
print FILEHANDLE "$name.so: ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h $mobjs\n";
if ($config{IS_DARWIN} eq "YES") {
- print FILEHANDLE " \$(CC) -pipe -twolevel_namespace -undefined dynamic_lookup \$(FLAGS) $mliflags -bundle -o $name.so $mobjs\n";
+ print FILEHANDLE " \@../../make/run-cc.pl \$(CC) -pipe -twolevel_namespace -undefined dynamic_lookup \$(FLAGS) $mliflags -bundle -o $name.so $mobjs\n";
} else {
- print FILEHANDLE " \$(CC) -pipe \$(FLAGS) -shared $mliflags -o $name.so $mobjs\n";
+ print FILEHANDLE " \@../../make/run-cc.pl \$(CC) -pipe \$(FLAGS) -shared $mliflags -o $name.so $mobjs\n";
}
print FILEHANDLE "\n$mfrules\n";
closedir(MDIRHANDLE);
return;
}
- foreach $fname (sort readdir(MDIRHANDLE)) {
+ foreach my $fname (sort readdir(MDIRHANDLE)) {
if ($fname =~ /\.cpp$/) {
- $cmflags = getcompilerflags("$dpath/$fname");
+ my $cmflags = getcompilerflags("$dpath/$fname");
$mliflags = $mliflags . " " . getlinkerflags("$dpath/$fname");
- $deps = getdependencies("$dpath/$fname");
- $oname = $fname;
+ my $deps = getdependencies("$dpath/$fname");
+ my $oname = $fname;
$oname =~ s/\.cpp$/.o/g;
$mfrules = $mfrules . "$reldpath/$oname: $reldpath/$fname ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h $deps\n";
- $mfrules = $mfrules . " \$(CC) -pipe -I../../include -I. \$(FLAGS) $cmflags -export-dynamic -o $reldpath/$oname -c $reldpath/$fname\n\n";
+ $mfrules = $mfrules . " \@../../make/run-cc.pl \$(CC) -pipe -I../../include -I. \$(FLAGS) $cmflags -export-dynamic -o $reldpath/$oname -c $reldpath/$fname\n\n";
$mobjs = $mobjs . " $reldpath/$oname";
$mfcount++;
}
}
$immutable =~ s/ $//g;
- while (chomp($line = <CPP>))
+ while (defined(my $line = <CPP>))
{
+ chomp($line);
if ($line =~ /#include "(.+\.h)"/)
{
if (!exists($dupe{$1}))
my @cmdlist = ();
my %existing_install_list = ();
opendir(DIRHANDLE, "src/commands");
- foreach $name (sort readdir(DIRHANDLE))
+ foreach my $name (sort readdir(DIRHANDLE))
{
if ($name =~ /^cmd_(.+)\.cpp$/)
{
foreach my $dir (("src","src/commands","src/modes","src/socketengines","src/modules"))
{
- print "Scanning \033[1;32m$dir\033[0m for core files ";
+ print "Scanning \e[1;32m$dir\e[0m for core files ";
opendir(DIRHANDLE, $dir);
- foreach $name (sort readdir(DIRHANDLE))
+ foreach my $name (sort readdir(DIRHANDLE))
{
if ($name =~ /\.cpp$/)
{
open (CPP, "<$dir/$name") or die("Can't open $dir/$name to scan it! oh bugger");
- while (chomp($line = <CPP>))
- {
+ print ".";
+ while (defined(my $line = <CPP>))
+ {
+ chomp($line);
if ($line =~ /\/\* \$Core: (\w+) \*\//i)
{
$filelist{$name} = $1;
- print ".";
}
elsif ($line =~ /\/\* \$ExtraDeps: (.*?) \*\//i)
{
}
elsif ($line =~ /\/\* \$If: (\w+) \*\//i)
{
- if (($config{$1} !~ /y/i) and ($config{$1} ne "1"))
+ if (defined $config{$1})
{
- # Skip to 'endif'
- while (chomp($line = <CPP>))
+ if (($config{$1} !~ /y/i) and ($config{$1} ne "1"))
{
- die ("\$If buildsystem instruction within another \$If in file $dir/$name") if ($line =~ /\/\* \$If: (\w+) \*\//i);
- last if ($line =~ /\/\* \$EndIf \*\//i);
+ # Skip to 'endif'
+ while (defined($line = <CPP>))
+ {
+ chomp($line);
+ die ("\$If buildsystem instruction within another \$If in file $dir/$name") if ($line =~ /\/\* \$If: (\w+) \*\//i);
+ last if ($line =~ /\/\* \$EndIf \*\//i);
+ }
}
}
}
{
if (!exists($existing_install_list{$1}))
{
- $idir = (split(' ',$1))[1];
- $ifile = (split(' ',$1))[0];
+ $existing_install_list{$1} = 1;
+ my $idir = (split(' ',$1))[1];
+ my $ifile = (split(' ',$1))[0];
$install_list = $install_list . " -install -m \$(INSTMODE) $1\n";
$ifile =~ s/.*\///g;
$uninstall_list = $uninstall_list . " -rm $idir/$ifile\n";
{
if (!exists($existing_install_list{$1}))
{
- $idir = (split(' ',$1))[1];
- $ifile = (split(' ',$1))[0];
- $install_list = $install_list . " -cp $1\n" if (!exists($existing_install_list{$1}));
+ $existing_install_list{$1} = 1;
+ my $idir = (split(' ',$1))[1];
+ my $ifile = (split(' ',$1))[0];
+ $install_list = $install_list . " -cp $1\n";
$ifile =~ s/.*\///g;
$uninstall_list = $uninstall_list . " -rm $idir/$ifile\n";
}
print " done!\n";
}
- $freebsd4libs = $config{CRAQ};
+ my $freebsd4libs = (defined $config{CRAQ} ? $config{CRAQ} : "");
my $all = "all: ";
- $all_libsonly = "";
+ my $all_libsonly = "";
+
+ my $libraryext = "";
+ my $othercrap = "";
+ my $RPATH = "";
if ($config{IS_DARWIN} eq "YES")
{
$libraryext = "dylib";
- $othercrap = " \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspircd.cpp\n \$(CC) -pipe -dynamic -bind_at_load -L. -o inspircd \$(LDLIBS) inspircd.o "
+ $othercrap = " \@../make/run-cc.pl \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspircd.cpp\n \@../make/run-cc.pl \$(CC) -pipe -dynamic -bind_at_load -L. -o inspircd \$(LDLIBS) inspircd.o "
}
else
{
$libraryext = "so";
- $othercrap = " \$(CC) -pipe -I../include -Wl,--rpath -Wl,$config{LIBRARY_DIR} \$(FLAGS) $freebsd4libs -rdynamic -L. inspircd.cpp -o inspircd \$(LDLIBS) ";
+ $RPATH = "-Wl,--rpath -Wl,$config{LIBRARY_DIR}" unless defined $opt_disablerpath;
+ $othercrap = " \@../make/run-cc.pl \$(CC) -pipe -I../include $RPATH \$(FLAGS) $freebsd4libs -rdynamic -L. inspircd.cpp -o inspircd \$(LDLIBS) ";
}
foreach my $cpp (sort keys %filelist)
print FH "$all\n\n";
- $deps = calcdeps("src/inspircd.cpp");
+ my $deps = calcdeps("src/inspircd.cpp");
print FH "inspircd: inspircd.cpp $deps $all_libsonly\n";
print FH "$othercrap\n";
my $thislib = $filelist{$cpp} . "." . $libraryext;
my $objs = $cpp;
my $rawcpp = $cpp;
+ my $libcrap = "";
$objs =~ s/\.cpp$/.o/;
if (exists($extraobjects{$cpp}))
{
}
else
{
- $libcrap = "-Wl,--rpath -Wl," . $config{LIBRARY_DIR} . " -shared";
+ if (defined $opt_disablerpath)
+ {
+ $libcrap = " -shared";
+ }
+ else
+ {
+ $libcrap = "-Wl,--rpath -Wl," . $config{LIBRARY_DIR} . " -shared";
+ }
}
$deps = calcdeps("src/$cpp");
if (exists($extrasources{$cpp}))
{
foreach my $seperate (sort split(' ',$extrasources{$cpp}))
{
- $d = calcdeps("src/$extrasources{$cpp}") . " ";
+ my $d = calcdeps("src/$extrasources{$cpp}") . " ";
if ($d ne "")
{
$deps = $deps . $d . " ";
}
}
}
- print FH $thislib . ": $cpp $deps ". $specialdeps{$cpp} . "\n";
- print FH " \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c $rawcpp\n";
+ print FH $thislib . ": $cpp $deps ". (defined($specialdeps{$cpp}) ? $specialdeps{$cpp} : "") . "\n";
+ print FH " \@../make/run-cc.pl \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c $rawcpp\n";
if (exists($extrabuildlines{$cpp}))
{
print FH " " . $extrabuildlines{$cpp} . "\n";
}
- print FH " \$(CC) -pipe $libcrap -o " . $thislib . " " . $objs . "\n\n";
+ print FH " \@../make/run-cc.pl \$(CC) -pipe $libcrap -o " . $thislib . " " . $objs . "\n\n";
}
- print FH "moo:\n \${MAKE} -C \"commands\" DIRNAME=\"src/commands\" CC=\"\$(CC)\" \$(MAKEARGS)\n\n";
+ print FH "moo:\n \@\${MAKE} -C \"commands\" DIRNAME=\"src/commands\" CC=\"\$(CC)\" \$(MAKEARGS)\n\n";
# close main makefile
close(FH);
+ my $cmdobjs = "";
# generate a list of .so
foreach my $cmd (@cmdlist) {
$cmdobjs = $cmdobjs . "cmd_$cmd.so ";
open(FH,">src/commands/Makefile") or die("Could not write src/commands/Makefile");
print FH <<ITEM;
CC = i am cornholio
-CXXFLAGS = -I../../include ${FLAGS}
+CXXFLAGS = -I../../include \${FLAGS}
all: $cmdobjs
foreach my $cmd (@cmdlist) {
print FH <<ITEM;
cmd_$cmd.so: cmd_$cmd.cpp ../../include/base.h ../../include/modules.h ../../include/inspircd.h ../../include/channels.h ../../include/users.h ../../include/globals.h ../../include/inspircd_config.h ../../include/commands/cmd_$cmd.h
- \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
- \$(CC) -pipe $SHARED -o cmd_$cmd.so cmd_$cmd.o
+ \@../../make/run-cc.pl \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
+ \@../../make/run-cc.pl \$(CC) -pipe $SHARED -o cmd_$cmd.so cmd_$cmd.o
ITEM
}
#try build a .so, no intermediate .o
-# \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic $SHARED -o cmd_$cmd.so
+# @../../make/run-cc.pl \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic $SHARED -o cmd_$cmd.so
#this works for sure
-# \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
-# \$(CC) -pipe $SHARED -o cmd_$cmd.so cmd_$cmd.o
+# @../../make/run-cc.pl \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
+# @../../make/run-cc.pl \$(CC) -pipe $SHARED -o cmd_$cmd.so cmd_$cmd.o
+}
+
+# Routine to list out the extra/ modules that have been enabled.
+# Note: when getting any filenames out and comparing, it's important to lc it if the
+# file system is not case-sensitive (== Epoc, MacOS, OS/2 (incl DOS/DJGPP), VMS, Win32
+# (incl NetWare, Symbian)). Cygwin may or may not be case-sensitive, depending on
+# configuration, however, File::Spec does not currently tell us (it assumes Unix behavior).
+sub list_extras () {
+ use File::Spec;
+ # @_ not used
+ my $srcdir = File::Spec->catdir("src", "modules");
+ my $abs_srcdir = File::Spec->rel2abs($srcdir);
+ local $_;
+ my $dd;
+ opendir $dd, File::Spec->catdir($abs_srcdir, "extra") or die (File::Spec->catdir($abs_srcdir, "extra") . ": $!\n");
+ my @extras = map { File::Spec->case_tolerant() ? lc($_) : $_ } (readdir($dd));
+ closedir $dd;
+ undef $dd;
+ opendir $dd, $abs_srcdir or die "$abs_srcdir: $!\n";
+ my @sources = map { File::Spec->case_tolerant() ? lc($_) : $_ } (readdir($dd));
+ closedir $dd;
+ undef $dd;
+ my $maxlen = (sort { $b <=> $a } (map {length($_)} (@extras)))[0];
+ my %extras = ();
+EXTRA: for my $extra (@extras) {
+ next if (File::Spec->curdir() eq $extra || File::Spec->updir() eq $extra);
+ next if ($extra eq '.svn');
+ my $abs_extra = File::Spec->catfile($abs_srcdir, "extra", $extra);
+ my $abs_source = File::Spec->catfile($abs_srcdir, $extra);
+ next unless ($extra =~ m/\.(cpp|h)$/ || (-d $abs_extra)); # C++ Source/Header, or directory
+ if (-l $abs_source) {
+ # Symlink, is it in the right place?
+ my $targ = readlink($abs_source);
+ my $abs_targ = File::Spec->rel2abs($targ, $abs_srcdir);
+ if ($abs_targ eq $abs_extra) {
+ $extras{$extra} = "\e[32;1menabled\e[0m";
+ } else {
+ $extras{$extra} = sprintf("\e[31;1mwrong symlink target (%s)\e[0m", $abs_targ);
+ }
+ } elsif (-e $abs_source) {
+ my ($devext, $inoext) = stat($abs_extra);
+ my ($devsrc, $inosrc, undef, $lnksrc) = stat($abs_source);
+ if ($lnksrc > 1) {
+ if ($devsrc == $devext && $inosrc == $inoext) {
+ $extras{$extra} = "\e[32;1menabled\e[0m";
+ } else {
+ $extras{$extra} = sprintf("\e[31;1mwrong hardlink target (%d:%d)\e[0m", $devsrc, $inosrc);
+ }
+ } else {
+ open my $extfd, "<", $abs_extra;
+ open my $srcfd, "<", $abs_source;
+ local $/ = undef;
+ if (scalar(<$extfd>) eq scalar(<$srcfd>)) {
+ $extras{$extra} = "\e[32;1menabled\e[0m";
+ } else {
+ $extras{$extra} = sprintf("\e[31;1mout of synch (re-copy)\e[0m");
+ }
+ }
+ } else {
+ $extras{$extra} = "\e[33;1mdisabled\e[0m";
+ }
+ }
+ # Now let's add dependency info
+ for my $extra (keys(%extras)) {
+ next unless $extras{$extra} =~ m/enabled/; # only process enabled extras.
+ my $abs_extra = File::Spec->catfile($abs_srcdir, "extra", $extra);
+ my @deps = split / +/, getdependencies($abs_extra);
+ for my $dep (@deps) {
+ if (exists($extras{$dep})) {
+ my $ref = \$extras{$dep}; # Take reference.
+ if ($$ref !~ m/needed by/) {
+ # First dependency found.
+ if ($$ref =~ m/enabled/) {
+ $$ref .= " (needed by \e[32;1m$extra\e[0m";
+ } else {
+ $$ref =~ s/\e\[.*?m//g; # Strip out previous coloring. Will be set in bold+red+blink later.
+ $$ref .= " (needed by \e[0;32;1;5m$extra\e[0;31;1;5m";
+ }
+ } else {
+ if ($$ref =~ m/enabled/) {
+ $$ref .= ", \e[32;1m$extra\e[0m";
+ } else {
+ $$ref .= ", \e[0;32;1;5m$extra\e[0;31;1;5m";
+ }
+ }
+ }
+ }
+ }
+ for my $extra (sort {$a cmp $b} keys(%extras)) {
+ my $text = $extras{$extra};
+ if ($text =~ m/needed by/ && $text !~ m/enabled/) {
+ printf "\e[31;1;5m%-*s = %s%s\e[0m\n", $maxlen, $extra, $text, ($text =~ m/needed by/ ? ")" : "");
+ } else {
+ printf "%-*s = %s%s\n", $maxlen, $extra, $text, ($text =~ m/needed by/ ? "\e[0m)" : "");
+ }
+ }
+ return keys(%extras) if wantarray; # Can be used by manage_extras.
}
+sub enable_extras (@) {
+ my (@extras) = @_;
+ for my $extra (@extras) {
+ my $extrapath = "src/modules/extra/$extra";
+ if (!-e $extrapath) {
+ print STDERR "Cannot enable \e[32;1m$extra\e[0m : No such file or directory in src/modules/extra\n";
+ next;
+ }
+ my $source = "src/modules/$extra";
+ if (-e $source) {
+ print STDERR "Cannot enable \e[32;1m$extra\e[0m : destination in src/modules exists (might already be enabled?)\n";
+ next;
+ }
+ # Get dependencies, and add them to be processed.
+ my @deps = split / +/, getdependencies($extrapath);
+ for my $dep (@deps) {
+ next if scalar(grep { $_ eq $dep } (@extras)) > 0; # Skip if we're going to be enabling it anyway.
+ if (!-e "src/modules/$dep") {
+ if (-e "src/modules/extra/$dep") {
+ print STDERR "Will also enable extra \e[32;1m$dep\e[0m (needed by \e[32;1m$extra\e[0m)\n";
+ push @extras, $dep;
+ } else {
+ print STDERR "\e[33;1mWARNING:\e[0m module \e[32;1m$extra\e[0m might be missing dependency \e[32;1m$dep\e[0m - YOU are responsible for satisfying it!\n";
+ }
+ }
+ }
+ print "Enabling $extra ... \n";
+ symlink "extra/$extra", $source or print STDERR "$source: Cannot link to 'extra/$extra': $!\n";
+ }
+}
+
+sub disable_extras (@)
+{
+ opendir my $dd, "src/modules/extra/";
+ my @files = readdir($dd);
+ closedir $dd;
+ my (@extras) = @_;
+EXTRA: for my $extra (@extras) {
+ my $extrapath = "src/modules/extra/$extra";
+ my $source = "src/modules/$extra";
+ if (!-e $extrapath) {
+ print STDERR "Cannot disable \e[32;1m$extra\e[0m : Is not an extra\n";
+ next;
+ }
+ if ((! -l $source) || readlink($source) ne "extra/$extra") {
+ print STDERR "Cannot disable \e[32;1m$extra\e[0m : Source is not a link or doesn't refer to the right file. Remove manually if this is in error.\n";
+ next;
+ }
+ # Check if anything needs this.
+ for my $file (@files) {
+ my @deps = split / +/, getdependencies("src/modules/extra/$file");
+ # File depends on this extra...
+ if (scalar(grep { $_ eq $extra } @deps) > 0) {
+ # And is both enabled and not about to be disabled.
+ if (-e "src/modules/$file" && scalar(grep { $_ eq $file } @extras) < 1) {
+ print STDERR "Cannot disable \e[32;1m$extra\e[0m : is needed by \e[32;1m$file\e[0m\n";
+ next EXTRA;
+ }
+ }
+ }
+ # Now remove.
+ print "Disabling $extra ... \n";
+ unlink "src/modules/$extra" or print STDERR "Cannot disable \e[32;1m$extra\e[0m : $!\n";
+ }
+}
projects / user / henk / code / inspircd.git / blobdiff