#
# $Id$
#
-# Some shell code based on the configure script of IRC Services.
-# IRC Services is copyright (c) 1996-2002 Andrew Church.
-# E-mail: <achurch@achurch.org>
-#
#
########################################
-# echo -e "\033[1;37mtest\033[0;37m"
-
echo "Configuring default values..."
-mkdir fdscount
-echo "#include <sys/types.h>" >> fdscount/fdcounter.c
-echo "#include <sys/socket.h>" >> fdscount/fdcounter.c
-echo "main()" >> fdscount/fdcounter.c
-echo "{" >> fdscount/fdcounter.c
-echo " int i;" >> fdscount/fdcounter.c
-echo " int s;" >> fdscount/fdcounter.c
-echo "" >> fdscount/fdcounter.c
-echo " for (i = 1; i <= 10000; i++)" >> fdscount/fdcounter.c
-echo " {" >> fdscount/fdcounter.c
-echo " s = socket(AF_INET, SOCK_STREAM, 0);" >> fdscount/fdcounter.c
-echo " if (s < 0)" >> fdscount/fdcounter.c
-echo " {" >> fdscount/fdcounter.c
-echo " printf(\"%i\", i + 2);" >> fdscount/fdcounter.c
-echo " exit(-1);" >> fdscount/fdcounter.c
-echo " }" >> fdscount/fdcounter.c
-echo " }" >> fdscount/fdcounter.c
-echo "}" >> fdscount/fdcounter.c
-
-echo "PROGS = fdcounter" >> fdscount/Makefile
-echo "OBJS = fdcounter.o" >> fdscount/Makefile
-echo "" >> fdscount/Makefile
-echo "CC = gcc" >> fdscount/Makefile
-echo "CXXFLAGS = -fPIC -frtti -O" >> fdscount/Makefile
-echo "" >> fdscount/Makefile
-echo "all : \$(PROGS)" >> fdscount/Makefile
-echo "" >> fdscount/Makefile
-echo "\$(PROGS): \$(OBJS)" >> fdscount/Makefile
-echo " \$(CXX) -rdynamic \$^ -o \$@" >> fdscount/Makefile
-echo "" >> fdscount/Makefile
-echo ".PHONY: clean" >> fdscount/Makefile
-echo "clean:" >> fdscount/Makefile
-echo " rm -f *.o core" >> fdscount/Makefile
-
-cd fdscount
-make
-cd ..
ME=`pwd`
-PERL=`which perl`
+GCCVER=`gcc -dumpversion | cut -c 1`
+GCC34=`gcc -dumpversion | cut -c 3`
CONFIG_DIR=$ME/conf
MODULE_DIR=$ME/modules
-MAX_CLIENT=`fdscount/fdcounter`
+BINARY_DIR=$ME/bin
+INSTALL=`which install`
+OPTIMITEMP=0
+OPTIMISATI="-g"
+MAX_CLIENT_T=`ulimit -n`
NICK_LENGT=32
CHAN_LENGT=64
MAX_CHANNE=20
MAXI_MODES=20
+HAS_STRLCPY=0
+OSNAME=`(uname -s) 2>/dev/null` || OSNAME="unknown"
-rm -rf fdscount
-
-if [ "$PERL" = "" ] ; then
- echo "You require perl to run this program."
- exit
+if [ -z $MAX_CLIENT_T ] ; then
+ MAX_CLIENT_T=1024
+ SCAN_FAILED=1
fi
+
if [ "$1" = "-clean" -o "$2" = "-clean" ] ; then
- CLEAN="1"
+ `rm -rf .config.cache`
fi
-if [ -e "config.cache" -a -z "$CLEAN" ] ; then
- . config.cache
+if [ -e ".config.cache" -a -z "$CLEAN" ] ; then
+ . .config.cache
+fi
+
+if [ "$1" = "-update" -o "$2" = "-update" ] ; then
+ # They wanna update their Makefile.. good for 'em
+ # Make sure .config.cache exists
+ if [ ! -e ".config.cache" ] ; then
+ echo "You have not run ./configure before. Please do this before trying to run the update script."
+ exit 0
+ fi
+ # Right, load the cache values
+ . .config.cache
+ # Check for modules
+
+ case "$OSNAME" in
+ FreeBSD)
+ LDLIBS="-Ldl"
+ FLAGS="-fPIC -frtti $OPTIMISATI -Wcomment -Wformat -Wunused -Wshadow -Werror -Wswitch -Wchar-subscripts -Wparentheses"
+ MAKEPROG="gmake"
+ ;;
+ *)
+ LDLIBS="-ldl"
+ FLAGS="-fPIC -frtti $OPTIMISATI -Wcomment -Wformat -Wunused -Wshadow -Werror -Wswitch -Wchar-subscripts -Wparentheses"
+ MAKEPROG="make"
+ ;;
+ esac
+
+ MODULES=""
+ for module in src/modules/*.cpp ; do
+ mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
+ MODULES="$MODULES $mod"
+ done
+
+ # Write the new makefile.
+ for file in Makefile; do
+ echo -e "\033[0mWriting \033[1;32m$file\033[0m"
+ rm -f $file
+ sed -e "
+ s%@MAKEPROG@%$MAKEPROG%g
+ s%@FLAGS@%$FLAGS%g
+ s%@LDLIBS@%$LDLIBS%g
+ s%@CONFIG_DIR@%$CONFIG_DIR%g
+ s%@MODULE_DIR@%$MODULE_DIR%g
+ s%@BINARY_DIR@%$BINARY_DIR%g
+ s%@MODULES@%$MODULES%g
+ " .${file}.inc >> $file
+ done
+ echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m"
+ rm -f src/modules/Makefile
+
+ # Generate the Header..
+
+ echo "# (C) ChatSpike development team" >> src/modules/Makefile
+ echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
+ echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
+ echo "# for assisting with making this work right." >> src/modules/Makefile
+ echo "#" >> src/modules/Makefile
+ echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
+ echo "# please run ./configure --update" >> src/modules/Makefile
+ echo "" >> src/modules/Makefile
+ echo "all: \$(MODULES)" >> src/modules/Makefile
+ echo "" >> src/modules/Makefile
+
+
+ for module in src/modules/*.cpp ; do
+ flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
+ mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
+ mod2=`echo $module | sed 's/src\/modules\///'`
+ echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
+ echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
+ echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
+ echo "" >> src/modules/Makefile
+ done
+
+
+ echo "Complete."
+ exit 1;
fi
-OSNAME=`(uname -s) 2>/dev/null` || OSNAME="unknown"
+
+if [ -z $MAX_CLIENT ] ; then
+ MAX_CLIENT=$MAX_CLIENT_T
+fi
c=""
n=""
-if [ "`eval echo -n 'a'`" = "-n a" ] ; then
+if [ "`eval echo -e -n 'a'`" = "-n a" ] ; then
c="\c"
else
n="-n"
fi
}
+echo "#include <string.h>">.test.cpp
+echo "#include <stdio.h>">>.test.cpp
+echo "int main() { char a[10]; char b[10]; strlcpy(a,b,10); printf(\"%d\\n\",9); }" >>.test.cpp
+g++ -o .test .test.cpp 2>&1
+if [ -e ".test" ] ; then
+ HAS_STRLCPY=1
+fi
+rm -f .test.cpp .test
+
clear
-echo -e "'\033[1;33m####\033[0;37m:'\033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m::'\033[1;33m######\033[0;37m::'\033[1;33m########\033[0;37m::'\033[1;33m####\033[0;37m:'\033[1;33m########\033[0;37m:::'\033[1;33m######\033[0;37m::'\033[1;33m########\033[0;37m::"
-echo -e ". \033[1;33m##\033[0;37m:: \033[1;33m###\033[0;37m:: \033[1;33m##\033[0;37m:'\033[1;33m##\033[0;37m... \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m.... \033[1;33m##\033[0;37m:. \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m.... \033[1;33m##\033[0;37m:'\033[1;33m##\033[0;37m... \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m.... \033[1;33m##\033[0;37m:"
-echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m####\033[0;37m: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m:::..:: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m:::..:: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
-echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m \033[1;33m##\033[0;37m \033[1;33m##\033[0;37m:. \033[1;33m######\033[0;37m:: \033[1;33m########\033[0;37m::: \033[1;33m##\033[0;37m:: \033[1;33m########\033[0;37m:: \033[1;33m##\033[0;37m::::::: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
-echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m. \033[1;33m####\033[0;37m::..... \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m.....:::: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m.. \033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m::::::: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
-echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m:. \033[1;33m###\033[0;37m:'\033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m::::::::: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m::. \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
-echo -e "'\033[1;33m####\033[0;37m: \033[1;33m##\033[0;37m::. \033[1;33m##\033[0;37m:. \033[1;33m######\033[0;37m:: \033[1;33m##\033[0;37m::::::::'\033[1;33m####\033[0;37m: \033[1;33m##\033[0;37m:::. \033[1;33m##\033[0;37m:. \033[1;33m######\033[0;37m:: \033[1;33m########\033[0;37m::"
-echo -e "\033[0;37m\033[0;37m....::..::::..:::......:::..:::::::::....::..:::::..:::......:::........:::"
+echo -e "'\033[1;33m####\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::'\033[1;33m####\033[0m:'\033[1;33m########\033[0m:::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::"
+echo -e ". \033[1;33m##\033[0m:: \033[1;33m###\033[0m:: \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:. \033[1;33m##\033[0m:: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:"
+echo -e ": \033[1;33m##\033[0m:: \033[1;33m####\033[0m: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
+echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m \033[1;33m##\033[0m \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::: \033[1;33m##\033[0m:: \033[1;33m########\033[0m:: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
+echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m. \033[1;33m####\033[0m::..... \033[1;33m##\033[0m: \033[1;33m##\033[0m.....:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m.. \033[1;33m##\033[0m::: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
+echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m:. \033[1;33m###\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m::::::::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:: \033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
+echo -e "'\033[1;33m####\033[0m: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m##\033[0m::::::::'\033[1;33m####\033[0m: \033[1;33m##\033[0m:::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::"
+echo -e "\033[0m\033[0m....::..::::..:::......:::..:::::::::....::..:::::..:::......:::........:::"
echo ""
-echo -e "\033[1;37mWelcome to the InspIRCd Configuration program!"
+echo "Welcome to the InspIRCd Configuration program!"
echo ""
echo "*** If you are unsure of any of these values, leave it blank for ***"
echo "*** standard settings that will work, and your server will run ***"
echo "*** using them. If you are running this server as part of a ***"
echo "*** larger network, you must consult with your network admins ***"
echo "*** for the proper values to use, or server links will be unstable! ***"
-echo -e "\033[0;37m"
-echo -e "Press \033[1;37m<RETURN>\033[0;37m to accept the default for any option, or enter"
-echo -e "a new value. Please note: You will \033[1;37mHAVE\033[0;37m to read the docs"
+echo ""
+echo -e "Press \033[1m<RETURN>\033[0m to accept the default for any option, or enter"
+echo -e "a new value. Please note: You will \033[1mHAVE\033[0m to read the docs"
echo -e "dir, otherwise you won't have a config file!"
echo ""
-echo -e "Your operating system is: \033[1;37m$OSNAME\033[0;37m (`uname -mnr`), fdmax: $MAX_CLIENT"
+echo -e "Your operating system is: \033[1;32m$OSNAME\033[0m (`uname -mnr`), fdmax: $MAX_CLIENT_T"
echo ""
#############################################################################
asked=1
echo "In what directory are the configuration files?"
while [ $ok -eq 0 ] ; do
- echo -e $n "[\033[1;32m$CONFIG_DIR\033[0;37m] -> $c"
+ echo -e $n "[\033[1;32m$CONFIG_DIR\033[0m] -> $c"
if read INPUT ; then : ; else echo "" ; exit 1 ; fi
if [ ! "$INPUT" ] ; then
INPUT=$CONFIG_DIR
echo "$INPUT exists, but is not a directory!"
else
echo "$INPUT does not exist. Create it?"
- echo -e $n "[\033[1;32my\033[0;37m] $c"
+ echo -e $n "[\033[1;32my\033[0m] $c"
read YN
if [ "$YN" != "n" ] ; then
if mkdir -p "$INPUT" ; then
asked=1
echo "In What directory are the modules to be compiled to?"
while [ $ok -eq 0 ] ; do
- echo -e $n "[\033[1;32m$MODULE_DIR\033[0;37m] -> $c"
+ echo -e $n "[\033[1;32m$MODULE_DIR\033[0m] -> $c"
if read INPUT ; then : ; else echo "" ; exit 1 ; fi
if [ ! "$INPUT" ] ; then
INPUT=$MODULE_DIR
echo "$INPUT exists, but is not a directory!"
else
echo "$INPUT does not exist. Create it?"
- echo -e $n "[\033[1;32my\033[0;37m] $c"
+ echo -e $n "[\033[1;32my\033[0m] $c"
read YN
if [ "$YN" != "n" ] ; then
if mkdir -p "$INPUT" ; then
echo ""
-###############################################################################
+##############################################################################
- echo -e "Maximum number of clients at any one time (\033[1;32m1-$MAX_CLIENT\033[0;37m)?"
- echo -e $n "[\033[1;32m$MAX_CLIENT\033[0;37m] -> $c"
- read cc
- if [ "$cc" ] ; then
- if [ "$cc" > "$MAX_CLIENT" ] ; then
- echo -e "Number entered was above the maximum allowed by your OS."
- echo -e "Max clients was set to the highest possible value, \033[1;32m$MAX_CLIENT\033[0;37m"
- else
- MAX_CLIENT=$cc
- fi
- fi
+ ok=0
+ asked=1
+ echo "In what directory is the IRCd binary to be placed?"
+ while [ $ok -eq 0 ] ; do
+ echo -e $n "[\033[1;32m$BINARY_DIR\033[0m] -> $c"
+ if read INPUT ; then : ; else echo "" ; exit 1 ; fi
+ if [ ! "$INPUT" ] ; then
+ INPUT=$BINARY_DIR
+ default=1
+ fi
+ if echo "$INPUT" | grep -q \[\'\"\\\] ; then
+ echo 'Please use a pathname without the characters: '\'' " \'
+ elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
+ if exists "$INPUT" ; then
+ echo "$INPUT exists, but is not a directory!"
+ else
+ echo "$INPUT does not exist. Create it?"
+ echo -e $n "[\033[1;32my\033[0m] $c"
+ read YN
+ if [ "$YN" != "n" ] ; then
+ if mkdir -p "$INPUT" ; then
+ ok=1
+ fi
+ fi
+ fi
+ else
+ ok=1
+ fi
+ done
+ BINARY_DIR=$INPUT
echo ""
###############################################################################
+# Craigs Version 3 With slightly less Cheeze :p
+
+cheeze=0
+echo -e "Maximum number of clients at any one time (\033[1;32m1-$MAX_CLIENT_T\033[0m)?"
+while [ "$cheeze" -eq "0" ] ; do
+ echo -e $n "[\033[1;32m$MAX_CLIENT\033[0m] -> $c"
+ read cc
+
+ if [ -z "$cc" ] ; then
+ cc=$MAX_CLIENT
+ fi
+
+ case "$cc" in
+ [0-9]*)
+ if [ "$cc" -gt "$MAX_CLIENT_T" -a -z "$SCAN_FAILED" ] ; then
+ echo -e "WARNING: Our scans have indicated that you are attempting"
+ echo -e "to use more sockets than there are avaliable. Are you sure"
+ echo -e "you wish to do this? It may cause the IRCd to malfunction [y/n]"
+ echo -e $n "[\033[1;32mn\033[0m] -> $c"
+ read YN
+ if [ "$YN" = "y" ] ; then
+ MAX_CLIENT=$cc
+ cheeze=1
+ else
+ echo ""
+ echo -e "Please enter the correct value (\033[1;32m1-$MAX_CLIENT_T\033[0m)"
+ fi
+ else
+ echo $SCAN_FAILED
+ cheeze=1
+ MAX_CLIENT=$cc
+ fi
+ ;;
+ *)
+ echo ""
+ echo "You must enter a number in this field. Please try again."
+ ;;
+ esac
+done
+echo ""
- echo "What is the Maximum length of nicknames?"
- echo -e $n "[\033[1;32m$NICK_LENGT\033[0;37m] -> $c"
- read cc
- if [ "$cc" ] ; then
- NICK_LENGT=$cc
- fi
- echo ""
###############################################################################
- echo "What is the Maximum length of channel names?"
- echo -e $n "[\033[1;32m$CHAN_LENGT\033[0;37m] -> $c"
- read cc
- if [ "$cc" ] ; then
- CHAN_LENGT=$cc
- fi
- echo ""
+ cheeze=0
+ echo -e "What is the Maximum length of nicknames?"
+ while [ "$cheeze" -eq "0" ] ; do
+ echo -e $n "[\033[1;32m$NICK_LENGT\033[0m] -> $c"
+ read cc
+ if [ "$cc" ] ; then
+ case "$cc" in
+ [0-9]*)
+ NICK_LENGT=$cc
+ cheeze=1
+ ;;
+ *)
+ echo ""
+ echo "You Must Enter a Number in this field. Please Try Again."
+ cheeze=0
+ ;;
+ esac
+ else
+ cheeze=1
+ fi
+ done
+ echo ""
###############################################################################
- echo "What is the Maximum Number of channels a user may Join?"
- echo -e $n "[\033[1;32m$MAX_CHANNE\033[0;37m] -> $c"
- read cc
- if [ "$cc" ] ; then
- MAX_CHANNE_LENGT=$cc
- fi
- echo ""
+ cheeze=0
+ echo -e "What is the Maximum length of channel names?"
+ while [ "$cheeze" -eq "0" ] ; do
+ echo -e $n "[\033[1;32m$MAX_CHANNE\033[0m] -> $c"
+ read cc
+ if [ "$cc" ] ; then
+ case "$cc" in
+ [0-9]*)
+ MAX_CHANNE=$cc
+ cheeze=1
+ ;;
+ *)
+ echo ""
+ echo "You Must Enter a Number in this field. Please Try Again."
+ cheeze=0
+ ;;
+ esac
+ else
+ cheeze=1
+ fi
+ done
+ echo ""
###############################################################################
- echo "What is the Maximum number of mode changes in one line?"
- echo -e $n "[\033[1;32m$MAXI_MODES\033[0;37m] -> $c"
+ cheeze=0
+ echo -e "What is the Maximum number of mode changes in one line?"
+ while [ "$cheeze" -eq "0" ] ; do
+ echo -e $n "[\033[1;32m$MAXI_MODES\033[0m] -> $c"
+ read cc
+ if [ "$cc" ] ; then
+ case "$cc" in
+ [0-9]*)
+ MAXI_MODES=$cc
+ cheeze=1
+ ;;
+ *)
+ echo ""
+ echo "You Must Enter a Number in this field. Please Try Again."
+ cheeze=0
+ ;;
+ esac
+ else
+ cheeze=1
+ fi
+ done
+ echo ""
+
+###############################################################################
+# Code Optimisation?
+
+ cheeze=0
+ echo -e "Enter the Level Of Binary optimisation. This is a number between 0 and 3 (inclusive)"
+ echo -e "The InspIRCd Team will _NOT_ support any bug reports above 0."
+ echo -e "Also note, the IRCd behaviour will be different depending on this value."
+ echo -e "Please read the documentation for more information."
+ echo -e ""
+ echo -e "The Higher the number, the more optimised your binary will be. This value will default to 0"
+ echo -e "If you either a) Dont enter a number, or b) Enter a value outside the range."
+ echo -e $n "[\033[1;32m$OPTIMITEMP\033[0m] -> $c"
read cc
- if [ "$cc" ] ; then
- MAXI_MODES=$cc
+ if [ -z "$cc" ] ; then
+ cc=$OPTIMITEMP
fi
- echo ""
+ case "$cc" in
+ 1)
+ OPTIMITEMP=1
+ OPTIMISATI="-O"
+ ;;
+ 2)
+ OPTIMITEMP=2
+ OPTIMISATI="-O2"
+ ;;
+ 3)
+ OPTIMITEMP=3
+ OPTIMISATI="-O3"
+ ;;
+ *)
+ OPTIMITEMP=0
+ OPTIMISATI="-g"
+ ;;
+ esac
+ echo ""
###############################################################################
-echo -e "\033[1;32mPre-build configuration is complete!\033[0;37m"
+echo -e "\033[1;32mPre-build configuration is complete!\033[0m"
echo ""
-echo -e "\033[0;37mConfig path:\033[1;32m\t\t\t$CONFIG_DIR"
-echo -e "\033[0;37mModule path:\033[1;32m\t\t\t$MODULE_DIR"
-echo -e "\033[0;37mMax connections:\033[1;32m\t\t$MAX_CLIENT"
-echo -e "\033[0;37mMax User Channels\033[1;32m\t\t$MAX_CHANNE"
-echo -e "\033[0;37mMax nickname length:\033[1;32m\t\t$NICK_LENGT"
-echo -e "\033[0;37mMax channel length:\033[1;32m\t\t$CHAN_LENGT"
-echo -e "\033[0;37mMax mode length:\033[1;32m\t\t$MAXI_MODES"
-echo -e "\033[0;37m"
+echo -e "\033[0mConfig path:\033[1;32m\t\t\t$CONFIG_DIR"
+echo -e "\033[0mModule path:\033[1;32m\t\t\t$MODULE_DIR"
+echo -e "\033[0mMax connections:\033[1;32m\t\t$MAX_CLIENT"
+echo -e "\033[0mMax User Channels\033[1;32m\t\t$MAX_CHANNE"
+echo -e "\033[0mMax nickname length:\033[1;32m\t\t$NICK_LENGT"
+echo -e "\033[0mMax channel length:\033[1;32m\t\t$CHAN_LENGT"
+echo -e "\033[0mMax mode length:\033[1;32m\t\t$MAXI_MODES"
+echo -e "\033[0mGCC Version Found:\033[1;32m\t\t$GCCVER.$GCC34"
+echo -e "\033[0mOptimatizaton Flag:\033[1;32m\t\t$OPTIMISATI"
+echo -e "\033[0m"
echo "Writing cache file for future ./configures ..."
-if [ -e "config.cache" ] ; then
- rm config.cache
-fi
-echo "CONFIG_DIR=\"$CONFIG_DIR\"" >> config.cache
-echo "MODULE_DIR=\"$MODULE_DIR\"" >> config.cache
-echo "MAX_CLIENT=\"$MAX_CLIENT\"" >> config.cache
-echo "MAX_CHANNE=\"$MAX_CHANNE\"" >> config.cache
-echo "NICK_LENGT=\"$NICK_LENGT\"" >> config.cache
-echo "MAXI_MODES=\"$MAXI_MODES\"" >> config.cache
+COPY_CONF=0
+if [ "$CONFIG_DIR" != "$ME/conf" ] ; then
+ COPY_CONF=1
+fi
-echo "Writing include/inspircd_config.h ..."
+if [ -e ".config.cache" ] ; then
+ rm .config.cache
+fi
+echo "CONFIG_DIR=\"$CONFIG_DIR\"" >> .config.cache
+echo "MODULE_DIR=\"$MODULE_DIR\"" >> .config.cache
+echo "BINARY_DIR=\"$BINARY_DIR\"" >> .config.cache
+echo "MAX_CLIENT=\"$MAX_CLIENT\"" >> .config.cache
+echo "MAX_CHANNE=\"$MAX_CHANNE\"" >> .config.cache
+echo "NICK_LENGT=\"$NICK_LENGT\"" >> .config.cache
+echo "MAXI_MODES=\"$MAXI_MODES\"" >> .config.cache
+echo "OPTIMITEMP=\"$OPTIMITEMP\"" >> .config.cache
+echo "OPTIMISATI=\"$OPTIMISATI\"" >> .config.cache
+echo "GCC34=\"$GCC34\"" >> .config.cache
+echo "HAS_STRLCPY=\"$HAS_STRLCPY\"" >> .config.cache
+echo "COPY_CONF=\"$COPY_CONF\"" >> .config.cache
+
+echo -e "Writing \033[1;32minspircd_config.h"
echo "/* Auto generated by configure, do not modify! */" >include/inspircd_config.h
echo "" >>include/inspircd_config.h
+if [ "$GCCVER" -eq "3" ] ; then
+echo "#define GCC3" >>include/inspircd_config.h
+ if [ "$GCC34" -gt "3" ] ; then
+ echo "#define GCC34" >>include/inspircd_config.h
+ fi
+fi
+if [ "$HAS_STRLCPY" -eq "1" ] ; then
+ echo "#define HAS_STRLCPY" >>include/inspircd_config.h
+fi
echo "#define SYSLOG_FACILITY LOG_DAEMON" >>include/inspircd_config.h
echo "#define SYSLOG_LEVEL LOG_NOTICE" >>include/inspircd_config.h
echo "#define CONFIG_FILE \"$CONFIG_DIR/inspircd.conf\"" >>include/inspircd_config.h
echo "#define CHANMAX $CHAN_LENGT" >>include/inspircd_config.h
echo "#define MAXCHANS $MAX_CHANNE" >>include/inspircd_config.h
echo "#define MAXMODES $MAXI_MODES" >>include/inspircd_config.h
+echo "#define OPTIMISATION $OPTIMITEMP" >>include/inspircd_config.h
echo "#define SYSTEM \"`uname -n -s -r`\"" >>include/inspircd_config.h
echo "#define MAXBUF 514">>include/inspircd_config.h
-
touch include/inspircd_config.h
-echo -e "Writing \033[1;37m$OSNAME\033[0;37m makefile"
-echo ""
+case "$OSNAME" in
+ FreeBSD)
+ LDLIBS="-Ldl"
+ FLAGS="-fPIC -frtti $OPTIMISATI"
+ MAKEPROG="gmake"
+ ;;
+ *)
+ LDLIBS="-ldl"
+ FLAGS="-fPIC -frtti $OPTIMISATI"
+ MAKEPROG="make"
+ ;;
+esac
+
+MODULES=""
+for module in src/modules/*.cpp ; do
+ mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
+ MODULES="$MODULES $mod"
+done
+
+for file in Makefile inspircd; do
+ echo -e "\033[0mWriting \033[1;32m$file\033[0m"
+ rm -f $file
+ sed -e "
+ s%@MAKEPROG@%$MAKEPROG%g
+ s%@FLAGS@%$FLAGS%g
+ s%@LDLIBS@%$LDLIBS%g
+ s%@CONFIG_DIR@%$CONFIG_DIR%g
+ s%@MODULE_DIR@%$MODULE_DIR%g
+ s%@BINARY_DIR@%$BINARY_DIR%g
+ s%@MODULES@%$MODULES%g
+ " .${file}.inc >> $file
+done
+`chmod 700 inspircd`
+
+echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m"
+rm -f src/modules/Makefile
+
+# Generate the Header..
+
+echo "# (C) ChatSpike development team" >> src/modules/Makefile
+echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
+echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
+echo "# for assisting with making this work right." >> src/modules/Makefile
+echo "#" >> src/modules/Makefile
+echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
+echo "# please run ./configure --update" >> src/modules/Makefile
+echo "" >> src/modules/Makefile
+echo "all: \$(MODULES)" >> src/modules/Makefile
+echo "" >> src/modules/Makefile
+
+for module in src/modules/*.cpp ; do
+ flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
+ mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
+ mod2=`echo $module | sed 's/src\/modules\///'`
+ echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
+ echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
+ echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
+ echo "" >> src/modules/Makefile
+done
-if exists "Makefile.$OSNAME" ; then
- echo "Operating system supported."
-else
- echo "Your operating system, \"$OSNAME\", is not supported!"
- exit
-fi
echo ""
-cp -f Makefile.$OSNAME Makefile
-cp -f src/Makefile.$OSNAME src/Makefile
-cp -f src/modules/Makefile.$OSNAME src/modules/Makefile
-
echo ""
echo "Do you want to compile the IRCd binaries?"
-echo -e $n "[\033[1;32my\033[0;37m] $c"
+echo -e $n "[\033[1;32my\033[0m] $c"
read YN
if [ "$YN" != "n" ] ; then
echo ""
- echo -e "\033[1;32mCompiling...\033[0;37m"
+ echo -e "\033[1;32mCompiling...\033[0m"
echo ""
cd $ME
- make
+ $MAKEPROG
echo ""
echo "Done!"
- echo ""
else
echo ""
- echo "Done!"
- echo ""
- echo -e "To build your server with these settings, please type '\033[1;32mmake\033[0;37m' now."
- echo ""
- echo -e "*** \033[1;32mRemember to edit your configuration files!!!\033[0;37m ***"
- echo ""
+ echo -e "To build your server with these settings, please type '\033[1;32m$MAKEPROG\033[0m' now."
fi
echo ""
-echo "Do you want to run the config file maker?"
-echo -e $n "[\033[1;32my\033[0;37m] $c"
-read YN
-if [ "$YN" != "n" ] ; then
- sh makeconf
-fi
-
-echo -e "*** \033[1;32mRemember to edit your configuration files!!!\033[0;37m ***"
+echo -e "*** \033[1;32mRemember to edit your configuration files!!!\033[0m ***"
echo ""
-
projects / user / henk / code / inspircd.git / blobdiff