};
use File::Copy ();
-use Socket;
use Cwd;
use Getopt::Long;
# Utility functions for our buildsystem
use make::utilities;
use make::configure;
-use make::gnutlscert;
-use make::opensslcert;
###############################################################################################
#
#
###############################################################################################
-our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_ports,
- $opt_epoll, $opt_kqueue, $opt_noports, $opt_noepoll, $opt_nokqueue,
- $opt_noipv6, $opt_maxbuf, $opt_disable_debug, $opt_freebsd_port,
- $opt_system, $opt_uid);
+our ($opt_use_gnutls, $opt_use_openssl, $opt_nointeractive, $opt_socketengine, $opt_freebsd_port,
+ $opt_system, $opt_uid);
-our ($opt_cc, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir, $opt_data_dir, $opt_log_dir);
+our ($opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir, $opt_data_dir, $opt_log_dir);
sub list_extras ();
GetOptions (
'enable-gnutls' => \$opt_use_gnutls,
- 'rebuild' => \$opt_rebuild,
'system' => \$opt_system,
'uid=s' => \$opt_uid,
'enable-openssl' => \$opt_use_openssl,
'disable-interactive' => \$opt_nointeractive,
- 'enable-ports' => \$opt_ports,
- 'enable-epoll' => \$opt_epoll,
- 'enable-kqueue' => \$opt_kqueue,
- 'disable-ports' => \$opt_noports,
- 'disable-epoll' => \$opt_noepoll,
- 'disable-kqueue' => \$opt_nokqueue,
- 'disable-ipv6' => \$opt_noipv6,
- 'with-cc=s' => \$opt_cc,
- 'with-maxbuf=i' => \$opt_maxbuf,
+ 'socketengine=s' => \$opt_socketengine,
'enable-freebsd-ports-openssl' => \$opt_freebsd_port,
'prefix=s' => \$opt_base_dir,
'config-dir=s' => \$opt_config_dir,
'binary-dir=s' => \$opt_binary_dir,
'data-dir=s' => \$opt_data_dir,
'log-dir=s' => \$opt_log_dir,
- 'disable-debuginfo' => sub { $opt_disable_debug = 1 },
'help' => sub { showhelp(); },
'update' => sub { update(); },
'clean' => sub { clean(); },
'list-extras' => sub { list_extras; exit 0; }, # This, --enable-extras, and --disable-extras are for non-interactive managing.
'enable-extras=s@' => \@opt_enableextras, # ^
'disable-extras=s@' => \@opt_disableextras, # ^
- 'generate-openssl-cert' => sub { make_openssl_cert(); exit(0); },
- 'generate-gnutls-cert' => sub { make_gnutls_cert(); exit(0); }
);
if (scalar(@opt_enableextras) + scalar(@opt_disableextras) > 0) {
(defined $opt_data_dir) ||
(defined $opt_log_dir) ||
(defined $opt_nointeractive) ||
- (defined $opt_cc) ||
- (defined $opt_noipv6) ||
- (defined $opt_kqueue) ||
- (defined $opt_epoll) ||
- (defined $opt_ports) ||
+ (defined $opt_socketengine) ||
(defined $opt_use_openssl) ||
- (defined $opt_nokqueue) ||
- (defined $opt_noepoll) ||
- (defined $opt_noports) ||
- (defined $opt_maxbuf) ||
(defined $opt_system) ||
(defined $opt_uid) ||
(defined $opt_use_gnutls) ||
if (defined $opt_log_dir) {
$config{LOG_DIR} = $opt_log_dir;
}
-chomp($config{HAS_GNUTLS} = `pkg-config --modversion gnutls 2>/dev/null | cut -c 1,2,3`); # GNUTLS Version.
+chomp($config{HAS_GNUTLS} = `pkg-config --modversion gnutls 2>/dev/null`); # GNUTLS Version.
if (defined $opt_freebsd_port)
{
$config{USE_OPENSSL} = "y";
}
-if (!defined $opt_disable_debug) {
- $config{OPTIMISATI} = "-g1"; # Optimisation Flag
-} else {
- $config{OPTIMISATI} = "-O2";
-}
-
-$config{HAS_STRLCPY} = "false"; # strlcpy Check.
$config{HAS_STDINT} = "false"; # stdint.h check
-$config{USE_KQUEUE} = "y"; # kqueue enabled
-if (defined $opt_nokqueue) {
- $config{USE_KQUEUE} = "n";
-}
-$config{USE_POLL} = "y"; # poll enabled
-$config{USE_EPOLL} = "y"; # epoll enabled
-if (defined $opt_noepoll)
-{
- $config{USE_EPOLL} = "n";
-}
-$config{USE_PORTS} = "y"; # epoll enabled
-if (defined $opt_noports)
-{
- $config{USE_PORTS} = "n";
-}
-$config{_SOMAXCONN} = SOMAXCONN; # Max connections in accept queue
$config{OSNAME} = $^O; # Operating System Name
-$config{IS_DARWIN} = "NO"; # Is OSX?
$config{STARTSCRIPT} = "inspircd"; # start script?
$config{DESTINATION} = "BASE"; # Is target path.
if ($config{OSNAME} =~ /darwin/i)
{
- $config{IS_DARWIN} = "YES";
$config{STARTSCRIPT} = "org.inspircd.plist"; # start script for OSX.
- $config{CC} = "xcrun clang++"; # C++ compiler for OSX.
}
-else
-{
- $config{CC} = "g++"; # C++ compiler
+
+$config{CXX} = defined $ENV{CXX} && !system("$ENV{CXX} -v > /dev/null 2>&1") ? $ENV{CXX} : find_compiler();
+if ($config{CXX} eq "") {
+ print "A C++ compiler could not be detected on your system!\n";
+ print "Set the CXX environment variable to the full path if this is incorrect.\n";
+ exit 1;
}
-if (defined $opt_cc)
-{
- $config{CC} = $opt_cc;
+
+our %cxx = get_compiler_info($config{CXX});
+if ($cxx{UNSUPPORTED}) {
+ print "Your C++ compiler is too old to build InspIRCd!\n";
+ print "Reason: $cxx{REASON}\n";
+ exit 1;
}
-our $exec = $config{CC} . " -dumpversion | cut -c 1";
-chomp($config{GCCVER} = `$exec`); # Major GCC Version
-$exec = $config{CC} . " -dumpversion | cut -c 3";
-chomp($config{GCCMINOR} = `$exec`);
-$config{MAXBUF} = "512"; # Max buffer size
-if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)([a-z])?(\-[a-z][0-9])?$/) {
+if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)(?:[a-z])?(?:\-[a-z][0-9])?/) {
$config{HAS_OPENSSL} = $1;
} else {
$config{HAS_OPENSSL} = "";
}
-if (($config{GCCVER} eq "") || ($config{GCCMINOR} eq "")) {
- if ($config{IS_DARWIN} eq "YES") {
- print $config{CC} . " was not found! You require clang++ (the LLVM C++ compiler, part of the OSX developer tools) to build InspIRCd!\n";
- } else {
- print $config{CC} . " was not found! You require g++ (the GNU C++ compiler, part of GCC) to build InspIRCd!\n";
- }
- exit;
-}
-
# Get and Set some important vars..
getmodules();
unlink(".config.cache");
}
-our ($has_epoll, $has_ports, $has_kqueue) = (0, 0, 0);
-
sub update
{
eval {
} else {
# We've Loaded the cache file and all our variables..
print "Updating files...\n";
- if (defined($opt_disable_debug) && $opt_disable_debug == 1)
- {
- print "Disabling debug information (-g).\n";
- $config{OPTIMISATI} = "";
- }
- $has_epoll = $config{HAS_EPOLL};
- $has_ports = $config{HAS_PORTS};
- $has_kqueue = $config{HAS_KQUEUE};
+ %cxx = get_compiler_info($config{CXX});
writefiles(1);
makecache();
print "Complete.\n";
exit;
}
-
-sub test_compile {
- my $feature = shift;
- my $fail = 0;
- $fail ||= system "$config{CC} -o test_$feature make/check_$feature.cpp >/dev/null 2>&1";
- $fail ||= system "./test_$feature";
- unlink "test_$feature";
- return !$fail;
-}
-
print "Running non-interactive configure...\n" unless $interactive;
print "Checking for cache from previous configure... ";
print ($cache_loaded ? "found\n" : "not found\n");
$config{SYSTEM} = lc $^O;
print "Checking operating system version... $config{SYSTEM}\n";
-$exec = $config{CC} . " -dumpversion | cut -c 1";
-chomp($config{GCCVER} = `$exec`); # Major GCC Version
-$exec = $config{CC} . " -dumpversion | cut -c 3";
-chomp($config{GCCMINOR} = `$exec`);
-
-printf "Checking if stdint.h exists... ";
-$config{HAS_STDINT} = "true";
-our $fail = 0;
-open(STDINT, "</usr/include/stdint.h") or $config{HAS_STDINT} = "false";
-if ($config{HAS_STDINT} eq "true") {
- close(STDINT);
+print "Checking whether <stdint.h> exists... ";
+if (test_header($config{CXX}, "stdint.h")) {
+ $config{HAS_STDINT} = "true";
+ print "yes\n";
+} else {
+ $config{HAS_STDINT} = "false";
+ print "no\n";
+}
+
+printf "Checking whether clock_gettime() exists... ";
+if (test_file($config{CXX}, "clock_gettime.cpp", "-lrt")) {
+ $config{HAS_CLOCK_GETTIME} = "true";
+ print "yes\n";
+} else {
+ $config{HAS_CLOCK_GETTIME} = "false";
+ print "no\n";
}
-print "yes\n" if $config{HAS_STDINT} eq "true";
-print "no\n" if $config{HAS_STDINT} eq "false";
-
-printf "Checking if strlcpy exists... ";
-# Perform the strlcpy() test..
-$config{HAS_STRLCPY} = "false";
-$fail = 0;
-open(STRLCPY, "</usr/include/string.h") or $fail = 1;
-if (!$fail) {
- while (defined(my $line = <STRLCPY>)) {
- chomp($line);
- # try and find the delcaration of:
- # size_t strlcpy(...)
- if ($line =~ /size_t(\0x9|\s)+strlcpy/) {
- $config{HAS_STRLCPY} = "true";
- }
- }
- close(STRLCPY);
+
+printf "Checking whether eventfd() exists... ";
+if (test_file($config{CXX}, "eventfd.cpp")) {
+ $config{HAS_EVENTFD} = "true";
+ print "yes\n";
+} else {
+ $config{HAS_EVENTFD} = "false";
+ print "no\n";
}
-print "yes\n" if $config{HAS_STRLCPY} eq "true";
-print "no\n" if $config{HAS_STRLCPY} eq "false";
-
-printf "Checking if kqueue exists... ";
-$has_kqueue = 0;
-$fail = 0;
-open(KQUEUE, "</usr/include/sys/event.h") or $fail = 1;
-if (!$fail) {
- while (defined(my $line = <KQUEUE>)) {
- chomp($line);
- # try and find the delcaration of:
- # int kqueue(void);
- if ($line =~ /int(\0x9|\s)+kqueue/) {
- $has_kqueue = 1;
+
+print "Checking whether epoll is available... ";
+$config{HAS_EPOLL} = test_header($config{CXX}, "sys/epoll.h");
+print $config{HAS_EPOLL} ? "yes\n" : "no\n";
+$config{SOCKETENGINE} ||= "epoll" if $config{HAS_EPOLL};
+
+print "Checking whether Kqueue is available... ";
+$config{HAS_KQUEUE} = test_file($config{CXX}, "kqueue.cpp");
+print $config{HAS_KQUEUE} ? "yes\n" : "no\n";
+$config{SOCKETENGINE} ||= "kqueue" if $config{HAS_KQUEUE};
+
+print 'Checking whether Solaris IOCP is available... ';
+$config{HAS_PORTS} = test_header($config{CXX}, 'port.h');
+print $config{HAS_PORTS} ? "yes\n" : "no\n";
+$config{SOCKETENGINE} ||= "ports" if $config{HAS_PORTS};
+
+print 'Checking whether poll is available... ';
+$config{HAS_POLL} = test_header($config{CXX}, 'poll.h');
+print $config{HAS_POLL} ? "yes\n" : "no\n";
+$config{SOCKETENGINE} ||= "poll" if $config{HAS_POLL};
+
+# Select is available on all platforms
+$config{HAS_SELECT} = 1;
+$config{SOCKETENGINE} ||= "select";
+
+if (defined $opt_socketengine) {
+ my $cfgkey = "HAS_" . uc $opt_socketengine;
+ if ($config{$cfgkey} && -f "src/socketengines/socketengine_$opt_socketengine.cpp") {
+ $config{SOCKETENGINE} = $opt_socketengine;
+ } else {
+ print "Unable to use a socket engine which is not supported on this platform ($opt_socketengine)!\n";
+ print "Available socket engines are:";
+ foreach (<src/socketengines/socketengine_*.cpp>) {
+ s/src\/socketengines\/socketengine_(\w+)\.cpp/$1/;
+ print " $1" if $config{"HAS_" . uc $1};
}
+ print "\n";
+ exit 1;
}
- close(KQUEUE);
}
-print "yes\n" if $has_kqueue == 1;
-print "no\n" if $has_kqueue == 0;
-
-printf "Checking for epoll support... ";
-$has_epoll = test_compile('epoll');
-print $has_epoll ? "yes\n" : "no\n";
-
-printf "Checking for eventfd support... ";
-$config{HAS_EVENTFD} = test_compile('eventfd') ? 'true' : 'false';
-print $config{HAS_EVENTFD} eq 'true' ? "yes\n" : "no\n";
-
-printf "Checking if Solaris I/O completion ports are available... ";
-$has_ports = 0;
-our $system = `uname -s`;
-chomp ($system);
-$has_ports = 1 if ($system eq "SunOS");
-
-if ($has_ports) {
- my $kernel = `uname -r`;
- chomp($kernel);
- if (($kernel !~ /^5\.1./)) {
- $has_ports = 0;
- }
-}
-print "yes\n" if $has_ports == 1;
-print "no\n" if $has_ports == 0;
-
-$config{HAS_EPOLL} = $has_epoll;
-$config{HAS_KQUEUE} = $has_kqueue;
printf "Checking for libgnutls... ";
if (defined($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS}) || ($config{HAS_GNUTLS} eq "y"))) {
}
print ".\n\n";
- $config{CHANGE_COMPILER} = "n";
- print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
-
- while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
- print "\e[1;32mIMPORTANT!\e[0m A GCC 2.x compiler has been detected, and
-should NOT be used. You should probably specify a newer compiler.\n\n";
- yesno('CHANGE_COMPILER',"Do you want to change the compiler?");
- if ($config{CHANGE_COMPILER} =~ /y/i) {
- print "What command do you want to use to invoke your compiler?\n";
- print "[\e[1;32m$config{CC}\e[0m] -> ";
- chomp($config{CC} = <STDIN>);
- if ($config{CC} eq "") {
- $config{CC} = "g++";
- }
- chomp(my $foo = `$config{CC} -dumpversion | cut -c 1`);
- if ($foo ne "") {
- chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
- chomp($config{GCCMINOR} = `$config{CC} -dumpversion | cut -c 3`);
- print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
- if ($config{GCCVER} < 3) {
- print "\e[1;32mGCC 2.x WILL NOT WORK!\e[0m. Let's try that again, shall we?\n";
- }
- }
- else {
- print "\e[1;32mWARNING!\e[0m Could not execute the compiler you specified. You may want to try again.\n";
- }
- }
- }
-
- print "\n";
+ print "I have detected the following compiler: \e[1;32m$cxx{NAME}\e[0m (version \e[1;32m$cxx{VERSION}\e[0m)\n\n";
# Directory Settings..
my $tmpbase = $config{BASE_DIR};
dir_check("do you want the build to take place", "BUILD_DIR");
my $chose_hiperf = 0;
- if ($has_kqueue) {
+ if ($config{HAS_KQUEUE}) {
+ $config{USE_KQUEUE} = "y";
yesno('USE_KQUEUE',"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
print "\n";
if ($config{USE_KQUEUE} eq "y") {
+ $config{SOCKETENGINE} = "kqueue";
$chose_hiperf = 1;
}
}
- if ($has_epoll) {
+ if ($config{HAS_EPOLL}) {
+ $config{USE_EPOLL} = "y";
yesno('USE_EPOLL',"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
print "\n";
if ($config{USE_EPOLL} eq "y") {
+ $config{SOCKETENGINE} = "epoll";
$chose_hiperf = 1;
}
}
- if ($has_ports) {
+ if ($config{HAS_PORTS}) {
+ $config{USE_PORTS} = "y";
yesno('USE_PORTS',"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
print "\n";
if ($config{USE_PORTS} eq "y") {
+ $config{SOCKETENGINE} = "ports";
$chose_hiperf = 1;
}
}
- if (!$chose_hiperf) {
- yesno('USE_POLL', "Would you like to use poll?\n This is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?");
- if ($config{USE_POLL} ne "y")
- {
- print "No high-performance socket engines are available, or you chose\n";
- print "not to enable one. Defaulting to select() engine.\n\n";
+ if (!$chose_hiperf && $config{HAS_POLL}) {
+ $config{USE_POLL} = "y";
+ yesno('USE_POLL', "Would you like to use poll?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?");
+ if ($config{USE_POLL} eq "y") {
+ $config{SOCKETENGINE} = "poll";
}
}
+ if (!$chose_hiperf && $config{USE_POLL} ne "y")
+ {
+ print "No high-performance socket engines are available, or you chose\n";
+ print "not to enable one. Defaulting to select() engine.\n\n";
+ $config{SOCKETENGINE} = "select";
+ }
$config{USE_FREEBSD_BASE_SSL} = "n";
$config{USE_FREEBSD_PORTS_SSL} = "n";
# We are on a POSIX system, we can enable POSIX extras without asking
symlink "extra/m_regex_posix.cpp", "src/modules/m_regex_posix.cpp";
-dumphash();
-
if (($config{USE_GNUTLS} eq "y") && ($config{HAS_GNUTLS} ne "y"))
{
print "Sorry, but i couldn't detect gnutls. Make sure gnutls-config is in your path.\n";
* few times and get that HD going :) Then answer the *
* Questions which follow. If you are unsure, just hit enter *
*************************************************************\n\n";
- $failed = make_gnutls_cert();
+ $failed = system "./tools/genssl gnutls";
if ($failed) {
print "\n\e[1;32mCertificate generation failed!\e[0m\n\n";
} else {
* Generating the certificates may take some time, go grab a *
* coffee, or something. *
*************************************************************\n\n";
- make_openssl_cert();
+ system "./tools/genssl openssl";
print "\nCertificate generation complete, copying to config directory... ";
File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
depcheck();
writefiles(1);
makecache();
+dumphash();
-print "\n\n";
+print "\n";
print "To build your server with these settings, please run '\e[1;32mmake\e[0m' now.\n";
if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
print "Please note: for \e[1;32mSSL support\e[0m you will need to load required\n";
print "build process. For more info please refer to:\n";
print "\e[1;32mhttp://wiki.inspircd.org/Installation_From_Tarball\e[0m\n";
}
-print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n\n";
-if (($config{OSNAME} eq "OpenBSD") && ($config{CC} ne "eg++")) {
- print "\e[1;32mWARNING!\e[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but i'm letting you\ngo ahead with it anyway, just in case i'm wrong :-)\n";
-}
-
-if ($config{GCCVER} < "3") {
- print <<FOO2;
-\e[1;32mWARNING!\e[0m You are attempting to compile InspIRCd on GCC 2.x!
-GCC 2.x series compilers only had partial (read as broken) C++ support, and
-your compile will most likely fail horribly! If you have any problems, do NOT
-report them to the bugtracker or forums without first upgrading your compiler
-to a newer 3.x or 4.x (or whatever is available currently) version.
-FOO2
-}
+print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n";
################################################################################
# HELPER FUNCTIONS #
sub writefiles {
my($writeheader) = @_;
- # First File.. inspircd_config.h
+ # First File.. config.h
chomp(my $incos = `uname -n -s -r`);
chomp(my $version = `sh src/version.sh`);
chomp(my $revision2 = getrevision());
}
if ($writeheader == 1)
{
- print "Writing \e[1;32minspircd_config.h\e[0m\n";
- open(FILEHANDLE, ">include/inspircd_config.h.tmp");
+ print "Writing \e[1;32mconfig.h\e[0m\n";
+ open(FILEHANDLE, ">include/config.h.tmp");
print FILEHANDLE <<EOF;
/* Auto generated by configure, do not modify! */
-#ifndef __CONFIGURATION_AUTO__
-#define __CONFIGURATION_AUTO__
+#pragma once
-/* this is for windows support. */
-#define CoreExport /**/
-#define DllExport /**/
+#define BRANCH "$branch"
+#define VERSION "$version"
+#define REVISION "$revision2"
+#define SYSTEM "$incos"
#define CONFIG_PATH "$config{CONFIG_DIR}"
#define DATA_PATH "$config{DATA_DIR}"
#define LOG_PATH "$config{LOG_DIR}"
#define MOD_PATH "$config{MODULE_DIR}"
-#define SOMAXCONN_S "$config{_SOMAXCONN}"
-#define ENTRYPOINT int main(int argc, char** argv)
EOF
-print FILEHANDLE "#define MAXBUF " . ($config{MAXBUF}+2) . "\n";
- if ($config{OSNAME} =~ /SunOS/i) {
- print FILEHANDLE "#define IS_SOLARIS\n";
- }
- if ($config{OSNAME} =~ /MINGW32/i) {
- print FILEHANDLE "#define IS_MINGW\n";
- }
- if ($config{GCCVER} >= 3) {
- print FILEHANDLE "#define GCC3\n";
- }
- if (
- (($config{GCCVER} == 4) && ($config{GCCMINOR} >= 3))
- ||
- ($config{GCCVER} > 4)
- || # HACK: temporary fix for non-GCC (i.e. clang) builds
- ($config{CC} !~ /gcc/)
- ) {
- print FILEHANDLE "#define HASHMAP_DEPRECATED\n";
- }
- if ($config{HAS_STRLCPY} eq "true") {
- print FILEHANDLE "#define HAS_STRLCPY\n";
- }
if ($config{HAS_STDINT} eq "true") {
print FILEHANDLE "#define HAS_STDINT\n";
}
if ($config{HAS_EVENTFD} eq 'true') {
print FILEHANDLE "#define HAS_EVENTFD\n";
}
- if ($config{OSNAME} !~ /DARWIN/i) {
+ if ($config{HAS_CLOCK_GETTIME} eq 'true') {
print FILEHANDLE "#define HAS_CLOCK_GETTIME\n";
}
- my $use_hiperf = 0;
- if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
- print FILEHANDLE "#define USE_KQUEUE\n";
- $config{SOCKETENGINE} = "socketengine_kqueue";
- $use_hiperf = 1;
- }
- if (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
- print FILEHANDLE "#define USE_EPOLL\n";
- $config{SOCKETENGINE} = "socketengine_epoll";
- $use_hiperf = 1;
- }
- if (($has_ports) && ($config{USE_PORTS} eq "y")) {
- print FILEHANDLE "#define USE_PORTS\n";
- $config{SOCKETENGINE} = "socketengine_ports";
- $use_hiperf = 1;
- }
- # user didn't choose either epoll or select for their OS.
- # default them to USE_SELECT (ewwy puke puke)
- if (!$use_hiperf) {
- print "no hi-perf, " . $config{USE_POLL};
- if ($config{USE_POLL} eq "y")
- {
- print FILEHANDLE "#define USE_POLL\n";
- $config{SOCKETENGINE} = "socketengine_poll";
- }
- else
- {
- print FILEHANDLE "#define USE_SELECT\n";
- $config{SOCKETENGINE} = "socketengine_select";
- }
- }
- print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n\n#endif\n";
- close(FILEHANDLE);
- open(FILEHANDLE, ">include/inspircd_version.h.tmp");
- print FILEHANDLE <<EOF;
-#define BRANCH "$branch"
-#define VERSION "$version"
-#define REVISION "$revision2"
-#define SYSTEM "$incos"
-EOF
- close FILEHANDLE;
-
- for my $file (qw(include/inspircd_config.h include/inspircd_version.h)) {
- my $diff = 0;
- open my $fh1, $file or $diff = 1;
- open my $fh2, $file.'.tmp' or die "Can't read $file.tmp that we just wrote: $!";
- while (!$diff) {
- my $line1 = <$fh1>;
- my $line2 = <$fh2>;
- if (defined($line1) != defined($line2)) {
- $diff = 1;
- } elsif (!defined $line1) {
- last;
- } else {
- $diff = ($line1 ne $line2);
- }
- }
- if ($diff) {
- unlink $file;
- rename "$file.tmp", $file;
+ print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n";
+ close(FILEHANDLE);
+
+ my $file = 'include/config.h';
+ my $diff = 0;
+ open my $fh1, $file or $diff = 1;
+ open my $fh2, $file.'.tmp' or die "Can't read $file.tmp that we just wrote: $!";
+ while (!$diff) {
+ my $line1 = <$fh1>;
+ my $line2 = <$fh2>;
+ if (defined($line1) != defined($line2)) {
+ $diff = 1;
+ } elsif (!defined $line1) {
+ last;
} else {
- unlink "$file.tmp";
+ $diff = ($line1 ne $line2);
}
}
+ if ($diff) {
+ unlink $file;
+ rename "$file.tmp", $file;
+ } else {
+ unlink "$file.tmp";
+ }
}
# Write all .in files.
chomp(my $revision = getrevision());
$version = "$version(r$revision)";
- # We can actually parse any file starting with . and ending with .inc,
- # but right now we only parse .inspircd.inc to form './inspircd'
- prepare_dynamic_makefile();
-
my @dotfiles = qw(main.mk inspircd);
push @dotfiles, 'org.inspircd.plist' if $config{OSNAME} eq 'darwin';
close(FILEHANDLE);
$config{BUILD_DIR} ||= resolve_directory($config{ME}."/build");
+ $config{COMPILER} = lc $cxx{NAME};
for my $var (qw(
- CC SYSTEM BASE_DIR CONFIG_DIR MODULE_DIR BINARY_DIR BUILD_DIR DATA_DIR UID
+ CXX COMPILER SYSTEM BASE_DIR CONFIG_DIR MODULE_DIR BINARY_DIR BUILD_DIR DATA_DIR UID
STARTSCRIPT DESTINATION SOCKETENGINE
)) {
s/\@$var\@/$config{$var}/g;
s/\@IFDEF (\S+)/ifdef $1/g;
s/\@IFNDEF (\S+)/ifndef $1/g;
s/\@IFEQ (\S+) (\S+)/ifeq ($1,$2)/g;
+ s/\@IFNEQ (\S+) (\S+)/ifneq ($1,$2)/g;
s/\@ELSIFEQ (\S+) (\S+)/else ifeq ($1,$2)/g;
s/\@ELSE/else/g;
s/\@ENDIF/endif/g;
s/\@IFDEF (\S+)/.if defined($1)/g;
s/\@IFNDEF (\S+)/.if !defined($1)/g;
s/\@IFEQ (\S+) (\S+)/.if $1 == $2/g;
+ s/\@IFNEQ (\S+) (\S+)/.if $1 != $2/g;
s/\@ELSIFEQ (\S+) (\S+)/.elif $1 == $2/g;
s/\@ELSE/.else/g;
s/\@ENDIF/.endif/g;
}
}
-sub prepare_dynamic_makefile
-{
- my $i = 0;
-
- if (!$has_epoll)
- {
- $config{USE_EPOLL} = 0;
- }
- if (!$has_kqueue)
- {
- $config{USE_KQUEUE} = 0;
- }
- if (!$has_ports)
- {
- $config{USE_PORTS} = 0;
- }
-}
-
# Routine to list out the extra/ modules that have been enabled.
# Note: when getting any filenames out and comparing, it's important to lc it if the
# file system is not case-sensitive (== Epoc, MacOS, OS/2 (incl DOS/DJGPP), VMS, Win32
my @deps = split / +/, getdependencies($extrapath);
for my $dep (@deps) {
next if scalar(grep { $_ eq $dep } (@extras)) > 0; # Skip if we're going to be enabling it anyway.
- if (!-e "src/modules/$dep") {
+ if (!-e "src/modules/$dep" && !-e "include/$dep") {
if (-e "src/modules/extra/$dep") {
print STDERR "Will also enable extra \e[32;1m$dep\e[0m (needed by \e[32;1m$extra\e[0m)\n";
push @extras, $dep;