use strict;
use warnings FATAL => qw(all);
-use Data::Dumper;
-BEGIN {
- $Data::Dumper::Sortkeys = 1;
- $Data::Dumper::Useqq = 1;
-};
-
use File::Copy ();
+use File::Spec::Functions qw(rel2abs);
use Cwd;
use Getopt::Long;
-# Utility functions for our buildsystem
-use make::utilities;
use make::configure;
+use make::utilities;
-###############################################################################################
-#
-# NON-EDITABLE VARIABLES
-#
-###############################################################################################
-
-our ($opt_use_gnutls, $opt_use_openssl, $opt_nointeractive, $opt_socketengine, $opt_freebsd_port,
- $opt_system, $opt_uid);
-
-our ($opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir, $opt_data_dir, $opt_log_dir);
+our ($opt_use_gnutls, $opt_use_openssl, $opt_nointeractive, $opt_socketengine,
+ $opt_system, $opt_uid, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir,
+ $opt_data_dir, $opt_log_dir);
sub list_extras ();
'enable-openssl' => \$opt_use_openssl,
'disable-interactive' => \$opt_nointeractive,
'socketengine=s' => \$opt_socketengine,
- 'enable-freebsd-ports-openssl' => \$opt_freebsd_port,
'prefix=s' => \$opt_base_dir,
'config-dir=s' => \$opt_config_dir,
'module-dir=s' => \$opt_module_dir,
'binary-dir=s' => \$opt_binary_dir,
'data-dir=s' => \$opt_data_dir,
'log-dir=s' => \$opt_log_dir,
- 'help' => sub { showhelp(); },
- 'update' => sub { update(); },
- 'clean' => sub { clean(); },
+ 'help' => \&cmd_help,
+ 'update' => \&cmd_update,
+ 'clean' => \&cmd_clean,
'list-extras' => sub { list_extras; exit 0; }, # This, --enable-extras, and --disable-extras are for non-interactive managing.
'enable-extras=s@' => \@opt_enableextras, # ^
'disable-extras=s@' => \@opt_disableextras, # ^
(defined $opt_use_openssl) ||
(defined $opt_system) ||
(defined $opt_uid) ||
- (defined $opt_use_gnutls) ||
- (defined $opt_freebsd_port)
+ (defined $opt_use_gnutls)
);
-chomp(our $topdir = getcwd());
-our $this = resolve_directory($topdir); # PWD, Regardless.
-our @modlist = (); # Declare for Module List..
-our %config = (); # Initiate Configuration Hash..
-our $cache_loaded = getcache();
-$config{ME} = resolve_directory($topdir); # Present Working Directory
+our $topdir = getcwd();
+our %config = read_configure_cache();
+
+print "Checking for cache from previous configure... ";
+print %config ? "found\n" : "not found\n";
-$config{BASE_DIR} = $config{ME}."/run";
+$config{BASE_DIR} = $topdir."/run";
if (defined $opt_base_dir) {
$config{BASE_DIR} = $opt_base_dir;
}
if (defined $opt_system) {
- $config{UID} = $opt_uid || 'ircd';
- $config{CONFIG_DIR} = '/etc/inspircd';
- $config{MODULE_DIR} = '/usr/lib/inspircd';
- $config{BINARY_DIR} = '/usr/sbin/';
- $config{BUILD_DIR} = resolve_directory($config{ME}."/build"); # Build Directory
- $config{DATA_DIR} = '/var/inspircd';
- $config{LOG_DIR} = '/var/log/inspircd';
+ $config{UID} = defined $opt_uid ? $opt_uid : 'ircd';
+ $config{CONFIG_DIR} = '/etc/inspircd';
+ $config{MODULE_DIR} = '/usr/lib/inspircd';
+ $config{BINARY_DIR} = '/usr/sbin/';
+ $config{BUILD_DIR} = $topdir."/build";
+ $config{DATA_DIR} = '/var/inspircd';
+ $config{LOG_DIR} = '/var/log/inspircd';
} else {
- $config{UID} = $opt_uid || $<;
- $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Directory
- $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
- $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
- $config{BUILD_DIR} = resolve_directory($config{ME}."/build"); # Build Directory
- $config{DATA_DIR} = resolve_directory($config{BASE_DIR}."/data"); # Data directory
- $config{LOG_DIR} = resolve_directory($config{BASE_DIR}."/logs"); # Log directory
+ $config{UID} = defined $opt_uid ? $opt_uid : $<;
+ $config{CONFIG_DIR} = rel2abs($config{BASE_DIR}."/conf");
+ $config{MODULE_DIR} = rel2abs($config{BASE_DIR}."/modules");
+ $config{BINARY_DIR} = rel2abs($config{BASE_DIR}."/bin");
+ $config{BUILD_DIR} = rel2abs($topdir."/build");
+ $config{DATA_DIR} = rel2abs($config{BASE_DIR}."/data");
+ $config{LOG_DIR} = rel2abs($config{BASE_DIR}."/logs");
}
if (defined $opt_config_dir) {
if (defined $opt_log_dir) {
$config{LOG_DIR} = $opt_log_dir;
}
-chomp($config{HAS_GNUTLS} = `pkg-config --modversion gnutls 2>/dev/null`); # GNUTLS Version.
-
-if (defined $opt_freebsd_port)
-{
- chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`);
- chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`);
- $config{USE_FREEBSD_BASE_SSL} = "n";
-}
-else
-{
- if ($^O eq "freebsd")
- {
- # default: use base ssl
- chomp($config{HAS_OPENSSL} = `openssl version | cut -d ' ' -f 2`); # OpenSSL version, freebsd specific
- chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`); # Port version, may be different
- }
- else
- {
- chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version, others
- $config{HAS_OPENSSL_PORT} = "";
- }
-}
+chomp($config{HAS_GNUTLS} = `pkg-config --modversion gnutls 2>/dev/null`);
+chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`);
chomp(our $gnutls_ver = $config{HAS_GNUTLS});
chomp(our $openssl_ver = $config{HAS_OPENSSL});
-$config{USE_GNUTLS} = "n";
+$config{USE_GNUTLS} = 0;
if (defined $opt_use_gnutls)
{
$config{USE_GNUTLS} = "y"; # Use gnutls.
}
-$config{USE_OPENSSL} = "n"; # Use openssl.
+$config{USE_OPENSSL} = 0; # Use openssl.
if (defined $opt_use_openssl)
{
$config{USE_OPENSSL} = "y";
}
-$config{HAS_STDINT} = "false"; # stdint.h check
-$config{OSNAME} = $^O; # Operating System Name
-$config{STARTSCRIPT} = "inspircd"; # start script?
-$config{DESTINATION} = "BASE"; # Is target path.
-if ($config{OSNAME} =~ /darwin/i)
-{
- $config{STARTSCRIPT} = "org.inspircd.plist"; # start script for OSX.
-}
+$config{STARTSCRIPT} = $^O eq 'darwin' ? 'org.inspircd.plist' : 'inspircd';
$config{CXX} = defined $ENV{CXX} && !system("$ENV{CXX} -v > /dev/null 2>&1") ? $ENV{CXX} : find_compiler();
if ($config{CXX} eq "") {
$config{HAS_OPENSSL} = "";
}
-# Get and Set some important vars..
-getmodules();
+$config{HAS_CLOCK_GETTIME} = run_test 'clock_gettime()', test_file($config{CXX}, 'clock_gettime.cpp', '-lrt');
+$config{HAS_EVENTFD} = run_test 'eventfd()', test_file($config{CXX}, 'eventfd.cpp');
-sub clean
-{
- unlink(".config.cache");
-}
-
-sub update
-{
- eval {
- chomp($topdir = getcwd());
- $this = resolve_directory($topdir); # PWD, Regardless.
- getmodules();
- # Does the cache file exist?
- if (!getcache()) {
- # No, No it doesn't.. *BASH*
- print "You have not run ./configure before. Please do this before trying to run the update script.\n";
- exit 0;
- } else {
- # We've Loaded the cache file and all our variables..
- print "Updating files...\n";
- %cxx = get_compiler_info($config{CXX});
- writefiles(1);
- makecache();
- print "Complete.\n";
- exit;
- }
- };
- if ($@)
- {
- print "Configure update failed: $@\n";
- }
- exit;
-}
-
-print "Running non-interactive configure...\n" unless $interactive;
-print "Checking for cache from previous configure... ";
-print ($cache_loaded ? "found\n" : "not found\n");
-$config{SYSTEM} = lc $^O;
-print "Checking operating system version... $config{SYSTEM}\n";
-
-print "Checking whether <stdint.h> exists... ";
-if (test_header($config{CXX}, "stdint.h")) {
- $config{HAS_STDINT} = "true";
- print "yes\n";
-} else {
- $config{HAS_STDINT} = "false";
- print "no\n";
+if ($config{HAS_EPOLL} = run_test 'epoll', test_header($config{CXX}, 'sys/epoll.h')) {
+ $config{SOCKETENGINE} ||= 'epoll';
}
-printf "Checking whether clock_gettime() exists... ";
-if (test_file($config{CXX}, "clock_gettime.cpp", "-lrt")) {
- $config{HAS_CLOCK_GETTIME} = "true";
- print "yes\n";
-} else {
- $config{HAS_CLOCK_GETTIME} = "false";
- print "no\n";
+if ($config{HAS_KQUEUE} = run_test 'kqueue', test_file($config{CXX}, 'kqueue.cpp')) {
+ $config{SOCKETENGINE} ||= 'kqueue';
}
-printf "Checking whether eventfd() exists... ";
-if (test_file($config{CXX}, "eventfd.cpp")) {
- $config{HAS_EVENTFD} = "true";
- print "yes\n";
-} else {
- $config{HAS_EVENTFD} = "false";
- print "no\n";
+if ($config{HAS_PORTS} = run_test 'Solaris IOCP', test_header($config{CXX}, 'port.h')) {
+ $config{SOCKETENGINE} ||= 'ports';
}
-printf "Checking if a TCP deferring mechanism is available... ";
-if (test_file($config{CXX}, "tcp_defer_accept.cpp")) {
- $config{HAS_DEFER} = "TCP_DEFER_ACCEPT";
- print "yes (TCP_DEFER_ACCEPT)\n";
-} elsif (test_file($config{CXX}, "so_acceptfilter.cpp")) {
- $config{HAS_DEFER} = "SO_ACCEPTFILTER";
- print "yes (SO_ACCEPTFILTER)\n";
-} else {
- $config{HAS_DEFER} = "false";
- print "no\n";
+if ($config{HAS_POLL} = run_test 'poll', test_header($config{CXX}, 'poll.h')) {
+ $config{SOCKETENGINE} ||= 'poll';
}
-print "Checking whether epoll is available... ";
-$config{HAS_EPOLL} = test_header($config{CXX}, "sys/epoll.h");
-print $config{HAS_EPOLL} ? "yes\n" : "no\n";
-$config{SOCKETENGINE} ||= "epoll" if $config{HAS_EPOLL};
-
-print "Checking whether Kqueue is available... ";
-$config{HAS_KQUEUE} = test_file($config{CXX}, "kqueue.cpp");
-print $config{HAS_KQUEUE} ? "yes\n" : "no\n";
-$config{SOCKETENGINE} ||= "kqueue" if $config{HAS_KQUEUE};
-
-print 'Checking whether Solaris IOCP is available... ';
-$config{HAS_PORTS} = test_header($config{CXX}, 'port.h');
-print $config{HAS_PORTS} ? "yes\n" : "no\n";
-$config{SOCKETENGINE} ||= "ports" if $config{HAS_PORTS};
-
-print 'Checking whether poll is available... ';
-$config{HAS_POLL} = test_header($config{CXX}, 'poll.h');
-print $config{HAS_POLL} ? "yes\n" : "no\n";
-$config{SOCKETENGINE} ||= "poll" if $config{HAS_POLL};
-
# Select is available on all platforms
$config{HAS_SELECT} = 1;
$config{SOCKETENGINE} ||= "select";
}
}
-printf "Checking for libgnutls... ";
+print "Checking for libgnutls... ";
if (defined($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS}) || ($config{HAS_GNUTLS} eq "y"))) {
if (defined($gnutls_ver) && ($gnutls_ver ne "")) {
print "yes\n";
$config{HAS_GNUTLS} = "n";
}
-printf "Checking for openssl... ";
+print "Checking for openssl... ";
if (defined($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL}) || ($config{HAS_OPENSSL} eq "y"))) {
if (defined($openssl_ver) && ($openssl_ver ne "")) {
print "yes\n";
$config{HAS_OPENSSL} = "n";
}
-printf "Checking if you are running an ancient, unsupported OS... ";
-if ($config{OSNAME} =~ /FreeBSD/i)
-{
- my $version = `uname -r`;
- if ($version =~ /^4\./)
- {
- print "yes.\n";
- print "FreeBSD 4.x is no longer supported. By ANYONE.\n";
- print "To build, you will need to add the following to CXXFLAGS:\n";
- print "\t-L/usr/local/lib -lgnugetopt -DHAVE_DECL_GETOPT=1\n";
- }
- else
- {
- print "no ($version)\n";
- }
-}
-else
-{
- print "no ($config{OSNAME})\n";
-}
-
-################################################################################
-# BEGIN INTERACTIVE PART #
-################################################################################
-
-# Clear the Screen..
if ($interactive)
{
- print "\e[2J\e[0G\e[0d"; # J = Erase in Display, 2 = Entire Screen, (G, d) = Move cursor to (..,..)
- my $wholeos = $^O;
+ # Clear the screen.
+ system 'tput', 'clear';
+
+ my $revision = get_revision();
+ chomp(my $version = `sh src/version.sh`);
- my $rev = getrevision();
# Display Introduction Message..
print <<"STOP" ;
Welcome to the \e[1mInspIRCd\e[0m Configuration program! (\e[1minteractive mode\e[0m)
a new value. Please note: You will \e[1mHAVE\e[0m to read the docs
dir, otherwise you won't have a config file!
-Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
-Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
+Your operating system is: \e[1;32m$^O\e[0m
STOP
- if ($rev eq "r0") {
- print " (Non-SVN build)";
- }
- print ".\n\n";
+ print "Your InspIRCd version is: \e[1;32m";
+ print $revision eq 'release' ? substr($version, 9) : substr($revision, 1);
+ print "\e[0m\n\n";
+ print "The following compiler has been detected: \e[1;32m$cxx{NAME} $cxx{VERSION}\e[0m ($config{CXX})\n\n";
- print "I have detected the following compiler: \e[1;32m$cxx{NAME}\e[0m (version \e[1;32m$cxx{VERSION}\e[0m)\n\n";
+ # Check that the user actually wants this version.
+ if (index($version, '+') != -1) {
+ print <<"EOW" ;
+\e[1;31mWARNING!\e[0m You are building a development version. This contains code which has
+not been tested as heavily and may contain various faults which could seriously
+affect the running of your server. It is recommended that you use a stable
+version instead.
+
+You can obtain the latest stable version from https://github.com/inspircd/inspircd/releases
+or by running `git checkout insp20` if you are installing from Git.
+
+EOW
+ exit 1 unless prompt_bool(1, 'I understand this warning and want to continue anyway.', 0);
+ }
# Directory Settings..
my $tmpbase = $config{BASE_DIR};
- dir_check("do you wish to install the InspIRCd base", "BASE_DIR");
+ $config{BASE_DIR} = prompt_dir(1, 'What directory do you wish to install the InspIRCd base?', $config{BASE_DIR});
if ($tmpbase ne $config{BASE_DIR}) {
- $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Dir
- $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
- $config{DATA_DIR} = resolve_directory($config{BASE_DIR}."/data"); # Data Directory
- $config{LOG_DIR} = resolve_directory($config{BASE_DIR}."/logs"); # Log Directory
- $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
+ $config{CONFIG_DIR} = rel2abs($config{BASE_DIR}."/conf");
+ $config{MODULE_DIR} = rel2abs($config{BASE_DIR}."/modules");
+ $config{DATA_DIR} = rel2abs($config{BASE_DIR}."/data");
+ $config{LOG_DIR} = rel2abs($config{BASE_DIR}."/logs");
+ $config{BINARY_DIR} = rel2abs($config{BASE_DIR}."/bin");
}
- dir_check("are the configuration files", "CONFIG_DIR");
- dir_check("are the modules to be compiled to", "MODULE_DIR");
- dir_check("is the IRCd binary to be placed", "BINARY_DIR");
- dir_check("are variable data files to be located in", "DATA_DIR");
- dir_check("are the logs to be stored in", "LOG_DIR");
- dir_check("do you want the build to take place", "BUILD_DIR");
-
+ $config{BINARY_DIR} = prompt_dir(1, 'In what directory should the InspIRCd binary be placed?', $config{BINARY_DIR});
+ $config{CONFIG_DIR} = prompt_dir(1, 'In what directory are the configuration files to be stored?', $config{CONFIG_DIR});
+ $config{DATA_DIR} = prompt_dir(1, 'In what directory are variable data files to be stored?', $config{DATA_DIR});
+ $config{LOG_DIR} = prompt_dir(1, 'In what directory are log files to be stored?', $config{LOG_DIR});
+ $config{MODULE_DIR} = prompt_dir(1, 'In what directory are the modules to be placed?', $config{MODULE_DIR});
+ $config{BUILD_DIR} = prompt_dir(1, 'In what directory do you want the build to take place?', $config{BUILD_DIR});
+
my $chose_hiperf = 0;
if ($config{HAS_KQUEUE}) {
- $config{USE_KQUEUE} = "y";
- yesno('USE_KQUEUE',"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
- print "\n";
- if ($config{USE_KQUEUE} eq "y") {
+ $config{USE_KQUEUE} = prompt_bool(1, 'Your operating system has support for the high performance kqueue socket engine. Would you like to enable it?', 1);
+ if ($config{USE_KQUEUE}) {
$config{SOCKETENGINE} = "kqueue";
$chose_hiperf = 1;
}
}
if ($config{HAS_EPOLL}) {
- $config{USE_EPOLL} = "y";
- yesno('USE_EPOLL',"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
- print "\n";
- if ($config{USE_EPOLL} eq "y") {
+ $config{USE_EPOLL} = prompt_bool(1, 'Your operating system has support for the high performance epoll socket engine. Would you like to enable it?', 1);
+ if ($config{USE_EPOLL}) {
$config{SOCKETENGINE} = "epoll";
$chose_hiperf = 1;
}
}
if ($config{HAS_PORTS}) {
- $config{USE_PORTS} = "y";
- yesno('USE_PORTS',"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
- print "\n";
- if ($config{USE_PORTS} eq "y") {
+ $config{USE_PORTS} = prompt_bool(1, 'Your operating system has support for the high performance IOCP socket engine. Would you like to enable it?', 1);
+ if ($config{USE_PORTS}) {
$config{SOCKETENGINE} = "ports";
$chose_hiperf = 1;
}
}
if (!$chose_hiperf && $config{HAS_POLL}) {
- $config{USE_POLL} = "y";
- yesno('USE_POLL', "Would you like to use poll?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?");
- if ($config{USE_POLL} eq "y") {
+ $config{USE_POLL} = prompt_bool(1, 'Your operating system has support for the mid performance poll socket engine. Would you like to enable it?', 1);
+ if ($config{USE_POLL}) {
$config{SOCKETENGINE} = "poll";
}
}
- if (!$chose_hiperf && $config{USE_POLL} ne "y")
+ unless ($chose_hiperf || $config{USE_POLL})
{
- print "No high-performance socket engines are available, or you chose\n";
- print "not to enable one. Defaulting to select() engine.\n\n";
+ print "No high-performance socket engines are available, or you chose not to enable one. Defaulting to select() engine.\n\n";
$config{SOCKETENGINE} = "select";
}
- $config{USE_FREEBSD_BASE_SSL} = "n";
- $config{USE_FREEBSD_PORTS_SSL} = "n";
- if ($config{HAS_OPENSSL_PORT} ne "")
- {
- $config{USE_FREEBSD_PORTS_SSL} = "y";
- print "I have detected the OpenSSL FreeBSD port installed on your system,\n";
- print "version \e[1;32m".$config{HAS_OPENSSL_PORT}."\e[0m. Your base system OpenSSL is version \e[1;32m".$openssl_ver."\e[0m.\n\n";
- yesno('USE_FREEBSD_PORTS_SSL', "Do you want to use the FreeBSD ports version?");
- print "\n";
- $config{USE_FREEBSD_BASE_SSL} = "y" if ($config{USE_FREEBSD_PORTS_SSL} eq "n");
-
- if ($config{USE_FREEBSD_BASE_SSL} eq "n")
- {
- # update to port version
- $openssl_ver = $config{HAS_OPENSSL_PORT};
- }
- }
- else
- {
- $config{USE_FREEBSD_BASE_SSL} = "y" if ($^O eq "freebsd");
- }
-
- $config{USE_SSL} = "n";
- $config{MODUPDATE} = 'n';
-
if ($config{HAS_GNUTLS} eq "y" || $config{HAS_OPENSSL} eq "y")
{
print "Detected GnuTLS version: \e[1;32m" . $gnutls_ver . "\e[0m\n";
print "Detected OpenSSL version: \e[1;32m" . $openssl_ver . "\e[0m\n\n";
- yesno('USE_SSL', "One or more SSL libraries detected. Would you like to enable SSL support?");
- if ($config{USE_SSL} eq "y")
+ $config{USE_SSL} = prompt_bool(1, 'One or more SSL libraries detected. Would you like to enable SSL support?', 1);
+ if ($config{USE_SSL})
{
if ($config{HAS_GNUTLS} eq "y")
{
- yesno('USE_GNUTLS',"Would you like to enable SSL with m_ssl_gnutls? (recommended)");
- if ($config{USE_GNUTLS} eq "y")
+ $config{USE_GNUTLS} = prompt_bool(1, 'Would you like to enable SSL with m_ssl_gnutls (recommended)?', 1);
+ if ($config{USE_GNUTLS})
{
- print "\nUsing GnuTLS SSL module.\n";
+ print "Using GnuTLS SSL module.\n\n";
+ unlink 'src/modules/m_ssl_gnutls.cpp' if -f 'src/modules/m_ssl_gnutls.cpp';
+ symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!\n";
}
}
if ($config{HAS_OPENSSL} eq "y")
{
- yesno('USE_OPENSSL', "Would you like to enable SSL with m_ssl_openssl?");
- if ($config{USE_OPENSSL} eq "y")
+ $config{USE_OPENSSL} = prompt_bool(1, 'Would you like to enable SSL with m_ssl_openssl (recommended)?', 1);
+ if ($config{USE_OPENSSL})
{
- print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
+ print "Using OpenSSL SSL module.\n\n";
+ unlink 'src/modules/m_ssl_openssl.cpp' if -f 'src/modules/m_ssl_openssl.cpp';
+ symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!\n";
}
}
}
print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed and\n";
print "is in your path.\n\n";
}
-
- yesno('MODUPDATE',"Would you like to check for updates to third-party modules?");
- print "\n";
- if ($config{MODUPDATE} eq "y") {
- print "Checking for upgrades to extra and third party modules... ";
- system "./modulemanager upgrade";
- }
}
# We are on a POSIX system, we can enable POSIX extras without asking
symlink "extra/m_regex_posix.cpp", "src/modules/m_regex_posix.cpp";
-if (($config{USE_GNUTLS} eq "y") && ($config{HAS_GNUTLS} ne "y"))
+if (($config{USE_GNUTLS}) && ($config{HAS_GNUTLS} ne "y"))
{
- print "Sorry, but i couldn't detect gnutls. Make sure gnutls-config is in your path.\n";
- exit(0);
+ print "Sorry, but i couldn't detect gnutls. Make sure pkg-config is in your path.\n";
+ exit 1;
}
-if (($config{USE_OPENSSL} eq "y") && ($config{HAS_OPENSSL} ne "y"))
+if (($config{USE_OPENSSL}) && ($config{HAS_OPENSSL} ne "y"))
{
- print "Sorry, but i couldn't detect openssl. Make sure openssl is in your path.\n";
- exit(0);
+ print "Sorry, but i couldn't detect openssl. Make sure pkg-config is in your path.\n";
+ exit 1;
}
-our $failed = 0;
-$config{CERTGEN} ||= 'y';
-yesno('CERTGEN',"Would you like generate SSL certificates now?") if ($interactive && ($config{USE_GNUTLS} eq "y" || $config{USE_OPENSSL} eq "y"));
-
-if ($config{USE_GNUTLS} eq "y") {
- unless (-r "src/modules/m_ssl_gnutls.cpp") {
- print "Symlinking src/modules/m_ssl_gnutls.cpp from extra/\n";
- symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!";
- }
- if ($interactive && $config{CERTGEN} eq 'y')
- {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL Certificates Not found, Generating.. \n\n
-*************************************************************
-* Generating the Private Key may take some time, go grab a *
-* Coffee. Even better, to generate some more entropy if it *
-* is taking a while, open another console and type du / a *
-* few times and get that HD going :) Then answer the *
-* Questions which follow. If you are unsure, just hit enter *
-*************************************************************\n\n";
- $failed = system "./tools/genssl gnutls";
- if ($failed) {
- print "\n\e[1;32mCertificate generation failed!\e[0m\n\n";
- } else {
+if ($config{USE_GNUTLS} || $config{USE_OPENSSL}) {
+ if (my $val = prompt_bool($interactive, 'Would you like to generate SSL certificates now?', $interactive)) {
+ unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem" && -r "$config{CONFIG_DIR}/dhparams.pem") {
+ unless (system './tools/genssl auto') {
print "\nCertificate generation complete, copying to config directory... ";
File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
+ File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
print "Done.\n\n";
}
- }
- else {
- print "SSL Certificates found, skipping.\n\n";
- }
- }
- else
- {
- print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
- }
-}
-
-if ($config{USE_OPENSSL} eq "y") {
- unless (-r "src/modules/m_ssl_openssl.cpp") {
- print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
- symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!";
- }
- $failed = 0;
- if ($interactive && $config{CERTGEN} eq 'y')
- {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL Certificates Not found, Generating.. \n\n
-*************************************************************
-* Generating the certificates may take some time, go grab a *
-* coffee, or something. *
-*************************************************************\n\n";
- system "./tools/genssl openssl";
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
- print "Done.\n\n";
} else {
print "SSL Certificates found, skipping.\n\n"
}
+ } else {
+ print "Skipping SSL certificate generation in non-interactive mode.\n\n";
}
- else
- {
- print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
- }
-}
-if (($config{USE_GNUTLS} eq "n") && ($config{USE_OPENSSL} eq "n")) {
+} else {
print "Skipping SSL Certificate generation, SSL support is not available.\n\n";
}
-depcheck();
-writefiles(1);
-makecache();
-dumphash();
+print "Writing \e[1;32m.config.cache\e[0m ...\n";
+write_configure_cache(%config);
+writefiles();
+dump_hash();
print "\n";
print "To build your server with these settings, please run '\e[1;32mmake\e[0m' now.\n";
-if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
+if ($config{USE_GNUTLS} || $config{USE_OPENSSL}) {
print "Please note: for \e[1;32mSSL support\e[0m you will need to load required\n";
print "modules in your config. This configure script has added those modules to the\n";
print "build process. For more info please refer to:\n";
}
print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n";
-################################################################################
-# HELPER FUNCTIONS #
-################################################################################
-sub getcache {
- # Retrieves the .config.cache file, and loads values into the main config hash.
- open(CACHE, ".config.cache") or return 0;
- while (<CACHE>) {
- chomp;
- # Ignore Blank lines, and comments..
- next if /^\s*$/;
- next if /^\s*#/;
- my ($key, $value) = split("=", $_, 2);
- $value =~ /^\"(.*)\"$/;
- # Do something with data here!
- $config{$key} = $1;
- }
- close(CACHE);
- return 1;
-}
-
-sub makecache {
- # Dump the contents of %config
- print "Writing \e[1;32mcache file\e[0m for future ./configures ...\n";
- open(FILEHANDLE, ">.config.cache");
- foreach my $key (keys %config) {
- print FILEHANDLE "$key=\"$config{$key}\"\n";
- }
- close(FILEHANDLE);
-}
-
-sub dir_check {
- my ($desc, $hash_key) = @_;
- my $complete = 0;
- while (!$complete) {
- print "In what directory $desc?\n";
- print "[\e[1;32m$config{$hash_key}\e[0m] -> ";
- chomp(my $var = <STDIN>);
- if ($var eq "") {
- $var = $config{$hash_key};
- }
- if ($var =~ /^\~\/(.+)$/) {
- # Convert it to a full path..
- $var = resolve_directory($ENV{HOME} . "/" . $1);
- }
- elsif ((($config{OSNAME} =~ /MINGW32/i) and ($var !~ /^[A-Z]{1}:\\.*/)) and (substr($var,0,1) ne "/"))
- {
- # Assume relative Path was given.. fill in the rest.
- $var = $this . "/$var";
- }
-
- $var = resolve_directory($var);
- if (! -e $var) {
- print "$var does not exist. Create it?\n[\e[1;32my\e[0m] ";
- chomp(my $tmp = <STDIN>);
- if (($tmp eq "") || ($tmp =~ /^y/i)) {
- # Attempt to Create the Dir..
- my $chk = eval {
- use File::Path ();
- File::Path::mkpath($var, 0, 0777);
- 1;
- };
- unless (defined($chk) && -d $var) {
- print "Unable to create directory. ($var)\n\n";
- # Restart Loop..
- next;
- }
- } else {
- # They said they don't want to create, and we can't install there.
- print "\n\n";
- next;
- }
- } else {
- if (!is_dir($var)) {
- # Target exists, but is not a directory.
- print "File $var exists, but is not a directory.\n\n";
- next;
- }
- }
- # Either Dir Exists, or was created fine.
- $config{$hash_key} = $var;
- $complete = 1;
- print "\n";
- }
-}
-
-our $SHARED = "";
-
-my ($mliflags, $mfrules, $mobjs, $mfcount) = ("", "", "", 0);
-
sub writefiles {
- my($writeheader) = @_;
- # First File.. config.h
chomp(my $incos = `uname -n -s -r`);
chomp(my $version = `sh src/version.sh`);
- chomp(my $revision2 = getrevision());
+ my $revision = get_revision();
my $branch = "InspIRCd-0.0";
if ($version =~ /^(InspIRCd-[0-9]+\.[0-9]+)\.[0-9]+/)
{
$branch = $1;
}
- if ($writeheader == 1)
- {
- print "Writing \e[1;32mconfig.h\e[0m\n";
- open(FILEHANDLE, ">include/config.h.tmp");
- print FILEHANDLE <<EOF;
+ print "Writing \e[1;32mconfig.h\e[0m\n";
+ open(FILEHANDLE, ">include/config.h.tmp");
+ print FILEHANDLE <<EOF;
/* Auto generated by configure, do not modify! */
#pragma once
#define BRANCH "$branch"
#define VERSION "$version"
-#define REVISION "$revision2"
+#define REVISION "$revision"
#define SYSTEM "$incos"
+#define INSPIRCD_SOCKETENGINE_NAME "$config{SOCKETENGINE}"
#define CONFIG_PATH "$config{CONFIG_DIR}"
#define DATA_PATH "$config{DATA_DIR}"
EOF
- if ($config{HAS_STDINT} eq "true") {
- print FILEHANDLE "#define HAS_STDINT\n";
- }
- if ($config{HAS_EVENTFD} eq 'true') {
- print FILEHANDLE "#define HAS_EVENTFD\n";
- }
- if ($config{HAS_CLOCK_GETTIME} eq 'true') {
- print FILEHANDLE "#define HAS_CLOCK_GETTIME\n";
- }
- if ($config{HAS_DEFER} eq "TCP_DEFER_ACCEPT") {
- print FILEHANDLE "#define USE_TCP_DEFER_ACCEPT\n";
- } elsif ($config{HAS_DEFER} eq "SO_ACCEPTFILTER") {
- print FILEHANDLE "#define USE_SO_ACCEPTFILTER\n"
- }
-
- print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n";
- close(FILEHANDLE);
-
- my $file = 'include/config.h';
- my $diff = 0;
- open my $fh1, $file or $diff = 1;
- open my $fh2, $file.'.tmp' or die "Can't read $file.tmp that we just wrote: $!";
- while (!$diff) {
- my $line1 = <$fh1>;
- my $line2 = <$fh2>;
- if (defined($line1) != defined($line2)) {
- $diff = 1;
- } elsif (!defined $line1) {
- last;
- } else {
- $diff = ($line1 ne $line2);
- }
- }
- if ($diff) {
- unlink $file;
- rename "$file.tmp", $file;
- } else {
- unlink "$file.tmp";
- }
+ if ($config{HAS_EVENTFD}) {
+ print FILEHANDLE "#define HAS_EVENTFD\n";
+ }
+ if ($config{HAS_CLOCK_GETTIME}) {
+ print FILEHANDLE "#define HAS_CLOCK_GETTIME\n";
}
- # Write all .in files.
- my $tmp = "";
- my $file = "";
- my $exe = "inspircd";
+ print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n";
+ close(FILEHANDLE);
+
+ unlink 'include/config.h';
+ rename 'include/config.h.tmp', 'include/config.h';
# Do this once here, and cache it in the .*.inc files,
# rather than attempting to read src/version.sh from
# compiled code -- we might not have the source to hand.
- # Fix for bug#177 by Brain.
-
- chomp($version = `sh ./src/version.sh`);
- chomp(my $revision = getrevision());
- $version = "$version(r$revision)";
my @dotfiles = qw(main.mk inspircd);
- push @dotfiles, 'org.inspircd.plist' if $config{OSNAME} eq 'darwin';
+ push @dotfiles, 'org.inspircd.plist' if $^O eq 'darwin';
foreach my $file (@dotfiles) {
open(FILEHANDLE, "make/template/$file") or die "Can't open make/template/$file: $!";
$_ = join '', <FILEHANDLE>;
close(FILEHANDLE);
- $config{BUILD_DIR} ||= resolve_directory($config{ME}."/build");
+ $config{BUILD_DIR} ||= rel2abs($topdir."/build");
$config{COMPILER} = lc $cxx{NAME};
+ $config{SYSTEM} = lc $^O;
for my $var (qw(
CXX COMPILER SYSTEM BASE_DIR CONFIG_DIR MODULE_DIR BINARY_DIR BUILD_DIR DATA_DIR UID
- STARTSCRIPT DESTINATION SOCKETENGINE
+ STARTSCRIPT SOCKETENGINE
)) {
s/\@$var\@/$config{$var}/g;
}
- s/\@EXECUTABLE\@/$exe/ if defined $exe;
+
s/\@VERSION\@/$version/ if defined $version;
if ($file eq 'main.mk') {
}
}
- chmod 0755, 'inspircd';
-}
-
-sub depcheck
-{
- getmodules();
- for my $mod (@modlist) {
- getcompilerflags("src/modules/m_$mod.cpp");
- getlinkerflags("src/modules/m_$mod.cpp");
- }
+ chmod 0750, 'inspircd';
}
# Routine to list out the extra/ modules that have been enabled.
for my $extra (keys(%extras)) {
next unless $extras{$extra} =~ m/enabled/; # only process enabled extras.
my $abs_extra = File::Spec->catfile($abs_srcdir, "extra", $extra);
- my @deps = split / +/, getdependencies($abs_extra);
+ my @deps = split /\s+/, get_property($abs_extra, 'ModDep');
for my $dep (@deps) {
if (exists($extras{$dep})) {
my $ref = \$extras{$dep}; # Take reference.
next;
}
# Get dependencies, and add them to be processed.
- my @deps = split / +/, getdependencies($extrapath);
+ my @deps = split /\s+/, get_property($extrapath, 'ModDep');
for my $dep (@deps) {
next if scalar(grep { $_ eq $dep } (@extras)) > 0; # Skip if we're going to be enabling it anyway.
if (!-e "src/modules/$dep" && !-e "include/$dep") {
}
# Check if anything needs this.
for my $file (@files) {
- my @deps = split / +/, getdependencies("src/modules/extra/$file");
+ my @deps = split /\s+/, get_property("src/modules/extra/$file", 'ModDep');
# File depends on this extra...
if (scalar(grep { $_ eq $extra } @deps) > 0) {
# And is both enabled and not about to be disabled.
projects / user / henk / code / inspircd.git / blobdiff