-#!/usr/bin/perl
-###################################################
-# InspIRCd Configuration Script
+#!/usr/bin/env perl
#
-# Copyright 2002-2009 The InspIRCd Development Team
-# http://wiki.inspircd.org/Credits
+# InspIRCd -- Internet Relay Chat Daemon
#
-# Licensed under GPL, please see the COPYING file
-# for more information
+# Copyright (C) 2020 Nicole Kleinhoff <ilbelkyr@shalture.org>
+# Copyright (C) 2020 Daniel Vassdal <shutter@canternet.org>
+# Copyright (C) 2019 Matt Schatz <genius3000@g3k.solutions>
+# Copyright (C) 2013-2021 Sadie Powell <sadie@witchery.services>
+# Copyright (C) 2012, 2019 Robby <robby@chatbelgie.be>
+# Copyright (C) 2012 ChrisTX <xpipe@hotmail.de>
+# Copyright (C) 2010 Daniel De Graaf <danieldg@inspircd.org>
+# Copyright (C) 2008 Thomas Stagner <aquanight@inspircd.org>
+# Copyright (C) 2008 Robin Burchell <robin+git@viroteck.net>
+# Copyright (C) 2007 Dennis Friis <peavey@inspircd.org>
+# Copyright (C) 2006-2008 Craig Edwards <brain@inspircd.org>
#
-# $Id$
+# This file is part of InspIRCd. InspIRCd is free software: you can
+# redistribute it and/or modify it under the terms of the GNU General Public
+# License as published by the Free Software Foundation, version 2.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
-###################################################
-BEGIN {
- require 5.8.0;
-}
+use v5.10.0;
use strict;
use warnings FATAL => qw(all);
-use Data::Dumper;
-BEGIN {
- $Data::Dumper::Sortkeys = 1;
- $Data::Dumper::Useqq = 1;
-};
-
-use File::Copy ();
-use Socket;
-use Cwd;
-use Getopt::Long;
+use Cwd qw(getcwd);
+use File::Basename qw(basename);
+use File::Copy ();
+use File::Spec::Functions qw(abs2rel catfile catdir rel2abs);
+use FindBin qw($RealDir);
+use Getopt::Long qw(GetOptions);
+use POSIX qw(getgid getuid);
-# Utility functions for our buildsystem
-use make::utilities;
+use lib $RealDir;
+use make::common;
use make::configure;
-use make::gnutlscert;
-use make::opensslcert;
-
-###############################################################################################
-#
-# NON-EDITABLE VARIABLES
-#
-###############################################################################################
-
-our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_ports,
- $opt_epoll, $opt_kqueue, $opt_noports, $opt_noepoll, $opt_nokqueue,
- $opt_ipv6, $opt_ipv6links, $opt_noipv6links, $opt_maxbuf, $opt_disable_debug, $opt_freebsd_port);
-
-our ($opt_cc, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir,
- $opt_library_dir);
+use make::console;
+use make::directive;
+
+my ($opt_binary_dir,
+ $opt_config_dir,
+ $opt_data_dir,
+ $opt_development,
+ $opt_disable_auto_extras,
+ $opt_disable_interactive,
+ $opt_distribution_label,
+ $opt_example_dir,
+ $opt_gid,
+ $opt_log_dir,
+ $opt_manual_dir,
+ $opt_module_dir,
+ $opt_portable,
+ $opt_prefix,
+ $opt_runtime_dir,
+ $opt_script_dir,
+ $opt_socketengine,
+ $opt_system,
+ $opt_uid);
sub list_extras ();
my @opt_enableextras;
my @opt_disableextras;
-GetOptions (
- 'enable-gnutls' => \$opt_use_gnutls,
- 'rebuild' => \$opt_rebuild,
- 'enable-openssl' => \$opt_use_openssl,
- 'disable-interactive' => \$opt_nointeractive,
- 'enable-ports' => \$opt_ports,
- 'enable-epoll' => \$opt_epoll,
- 'enable-kqueue' => \$opt_kqueue,
- 'disable-ports' => \$opt_noports,
- 'disable-epoll' => \$opt_noepoll,
- 'disable-kqueue' => \$opt_nokqueue,
- 'enable-ipv6' => \$opt_ipv6,
- 'enable-remote-ipv6' => \$opt_ipv6links,
- 'disable-remote-ipv6' => \$opt_noipv6links,
- 'with-cc=s' => \$opt_cc,
- 'with-maxbuf=i' => \$opt_maxbuf,
- 'enable-freebsd-ports-openssl' => \$opt_freebsd_port,
- 'prefix=s' => \$opt_base_dir,
- 'config-dir=s' => \$opt_config_dir,
- 'module-dir=s' => \$opt_module_dir,
- 'binary-dir=s' => \$opt_binary_dir,
- 'library-dir=s' => \$opt_library_dir,
- 'disable-debuginfo' => sub { $opt_disable_debug = 1 },
- 'help' => sub { showhelp(); },
- 'update' => sub { update(); },
- 'svnupdate' => sub { svnupdate(); },
- 'clean' => sub { clean(); },
- 'list-extras' => sub { list_extras; exit 0; }, # This, --enable-extras, and --disable-extras are for non-interactive managing.
- 'enable-extras=s@' => \@opt_enableextras, # ^
- 'disable-extras=s@' => \@opt_disableextras, # ^
- 'generate-openssl-cert' => sub { make_openssl_cert(); exit(0); },
- 'generate-gnutls-cert' => sub { make_gnutls_cert(); exit(0); }
+exit 1 unless GetOptions(
+ 'clean' => \&cmd_clean,
+ 'help' => \&cmd_help,
+ 'update' => \&cmd_update,
+
+ 'binary-dir=s' => \$opt_binary_dir,
+ 'config-dir=s' => \$opt_config_dir,
+ 'data-dir=s' => \$opt_data_dir,
+ 'development' => \$opt_development,
+ 'disable-auto-extras' => \$opt_disable_auto_extras,
+ 'disable-interactive' => \$opt_disable_interactive,
+ 'distribution-label=s' => \$opt_distribution_label,
+ 'example-dir=s' => \$opt_example_dir,
+ 'gid=s' => \$opt_gid,
+ 'log-dir=s' => \$opt_log_dir,
+ 'manual-dir=s' => \$opt_manual_dir,
+ 'module-dir=s' => \$opt_module_dir,
+ 'portable' => \$opt_portable,
+ 'prefix=s' => \$opt_prefix,
+ 'runtime-dir=s' => \$opt_runtime_dir,
+ 'script-dir=s' => \$opt_script_dir,
+ 'socketengine=s' => \$opt_socketengine,
+ 'system' => \$opt_system,
+ 'uid=s' => \$opt_uid,
+
+ 'disable-extras=s@' => \@opt_disableextras,
+ 'enable-extras=s@' => \@opt_enableextras,
+ 'list-extras' => sub { list_extras; exit 0; },
);
if (scalar(@opt_enableextras) + scalar(@opt_disableextras) > 0) {
- @opt_enableextras = split /,/, join(',', @opt_enableextras);
- @opt_disableextras = split /,/, join(',', @opt_disableextras);
+ @opt_enableextras = grep { /\S/ } split /[, ]+/, join(',', @opt_enableextras);
+ @opt_disableextras = grep { /\S/ } split /[, ]+/, join(',', @opt_disableextras);
enable_extras(@opt_enableextras);
disable_extras(@opt_disableextras);
list_extras;
exit 0;
}
-our $non_interactive = (
- (defined $opt_library_dir) ||
- (defined $opt_base_dir) ||
- (defined $opt_config_dir) ||
- (defined $opt_module_dir) ||
- (defined $opt_base_dir) ||
- (defined $opt_binary_dir) ||
- (defined $opt_nointeractive) ||
- (defined $opt_cc) ||
- (defined $opt_ipv6) ||
- (defined $opt_ipv6links) ||
- (defined $opt_noipv6links) ||
- (defined $opt_kqueue) ||
- (defined $opt_epoll) ||
- (defined $opt_ports) ||
- (defined $opt_use_openssl) ||
- (defined $opt_nokqueue) ||
- (defined $opt_noepoll) ||
- (defined $opt_noports) ||
- (defined $opt_maxbuf) ||
- (defined $opt_use_gnutls) ||
- (defined $opt_freebsd_port)
+our $interactive = !(
+ !-t STDIN ||
+ !-t STDOUT ||
+ defined $opt_binary_dir ||
+ defined $opt_config_dir ||
+ defined $opt_data_dir ||
+ defined $opt_development ||
+ defined $opt_disable_auto_extras ||
+ defined $opt_disable_interactive ||
+ defined $opt_distribution_label ||
+ defined $opt_example_dir ||
+ defined $opt_gid ||
+ defined $opt_log_dir ||
+ defined $opt_manual_dir ||
+ defined $opt_module_dir ||
+ defined $opt_portable ||
+ defined $opt_prefix ||
+ defined $opt_runtime_dir ||
+ defined $opt_script_dir ||
+ defined $opt_socketengine ||
+ defined $opt_system ||
+ defined $opt_uid
);
-our $interactive = !$non_interactive;
-
-chomp(our $topdir = getcwd());
-our $this = resolve_directory($topdir); # PWD, Regardless.
-our @modlist = (); # Declare for Module List..
-our %config = (); # Initiate Configuration Hash..
-$config{ME} = resolve_directory($topdir); # Present Working Directory
-
-$config{BASE_DIR} = $config{ME};
-
-if (defined $opt_base_dir)
-{
- $config{BASE_DIR} = $opt_base_dir;
-}
-
-$config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Directory
-$config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
-$config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
-$config{LIBRARY_DIR} = resolve_directory($config{BASE_DIR}."/lib"); # Library Directory
-
-if (defined $opt_config_dir)
-{
- $config{CONFIG_DIR} = $opt_config_dir;
-}
-if (defined $opt_module_dir)
-{
- $config{MODULE_DIR} = $opt_module_dir;
-}
-if (defined $opt_binary_dir)
-{
- $config{BINARY_DIR} = $opt_binary_dir;
-}
-if (defined $opt_library_dir)
-{
- $config{LIBRARY_DIR} = $opt_library_dir;
-}
-chomp($config{HAS_GNUTLS} = `pkg-config --modversion gnutls 2>/dev/null | cut -c 1,2,3`); # GNUTLS Version.
-
-if (defined $opt_freebsd_port)
-{
- chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`);
- chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`);
- $config{USE_FREEBSD_BASE_SSL} = "n";
-}
-else
-{
- if ($^O eq "freebsd")
- {
- # default: use base ssl
- chomp($config{HAS_OPENSSL} = `openssl version | cut -d ' ' -f 2`); # OpenSSL version, freebsd specific
- chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`); # Port version, may be different
- }
- else
- {
- chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version, others
- $config{HAS_OPENSSL_PORT} = "";
- }
-}
-
-chomp(our $gnutls_ver = $config{HAS_GNUTLS});
-chomp(our $openssl_ver = $config{HAS_OPENSSL});
-$config{USE_GNUTLS} = "n";
-if (defined $opt_use_gnutls)
-{
- $config{USE_GNUTLS} = "y"; # Use gnutls.
-}
-$config{USE_OPENSSL} = "n"; # Use openssl.
-if (defined $opt_use_openssl)
-{
- $config{USE_OPENSSL} = "y";
-}
-
-# no, let's not change these.
-$config{OPTIMITEMP} = "0"; # Default Optimisation Value
-if (!defined $opt_disable_debug)
-{
- $config{OPTIMISATI} = "-g1"; # Optimisation Flag
-}
-else
-{
- $config{OPTIMISATI} = "-O2"; # DEBUGGING OFF!
-}
-
-$config{HAS_STRLCPY} = "false"; # strlcpy Check.
-$config{HAS_STDINT} = "false"; # stdint.h check
-$config{USE_KQUEUE} = "y"; # kqueue enabled
-if (defined $opt_kqueue)
-{
- $config{USE_KQUEUE} = "y";
-}
-if (defined $opt_nokqueue)
-{
- $config{USE_KQUEUE} = "n";
-}
-$config{USE_POLL} = "y"; # poll enabled
-$config{USE_EPOLL} = "y"; # epoll enabled
-if (defined $opt_epoll)
-{
- $config{USE_EPOLL} = "y";
-}
-if (defined $opt_noepoll)
-{
- $config{USE_EPOLL} = "n";
-}
-$config{USE_PORTS} = "y"; # epoll enabled
-if (defined $opt_ports)
-{
- $config{USE_PORTS} = "y";
-}
-if (defined $opt_noports)
-{
- $config{USE_PORTS} = "n";
-}
-$config{IPV6} = "n"; # IPv6 support (experimental)
-if (defined $opt_ipv6)
-{
- $config{IPV6} = "y";
-}
-$config{SUPPORT_IP6LINKS} = "y"; # IPv4 supporting IPv6 links (experimental)
-if (defined $opt_ipv6links)
-{
- $config{SUPPORT_IP6LINKS} = "y";
-}
-if (defined $opt_noipv6links)
-{
- $config{SUPPORT_IP6LINKS} = "n";
-}
-chomp($config{GCCVER} = `g++ -dumpversion | cut -c 1`); # Major GCC Version
-chomp($config{GCCMINOR} = `g++ -dumpversion | cut -c 3`);
-$config{_SOMAXCONN} = SOMAXCONN; # Max connections in accept queue
-$config{OSNAME} = $^O; # Operating System Name
-$config{IS_DARWIN} = "NO"; # Is OSX?
-$config{STARTSCRIPT} = "inspircd"; # start script?
-$config{DESTINATION} = "BASE"; # Is target path.
-$config{EXTRA_DIR} = ""; # Is empty.
-if ($config{OSNAME} =~ /darwin/i)
-{
- $config{IS_DARWIN} = "YES";
- $config{STARTSCRIPT} = "org.inspircd.plist"; # start script for OSX.
- $config{DESTINATION} = "LAUNCHDPATH"; # Is OSX target.
- $config{EXTRA_DIR} = " launchd_dir"; # Is OSX specific path.
-}
-$config{CC} = "g++"; # C++ compiler
-if (defined $opt_cc)
-{
- $config{CC} = $opt_cc;
-}
-our $exec = $config{CC} . " -dumpversion | cut -c 1";
-chomp($config{GCCVER} = `$exec`); # Major GCC Version
-$exec = $config{CC} . " -dumpversion | cut -c 3";
-chomp($config{GCCMINOR} = `$exec`);
-$config{MAXBUF} = "512"; # Max buffer size
-
-if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)([a-z])?(\-[a-z][0-9])?$/) {
- $config{HAS_OPENSSL} = $1;
-} else {
- $config{HAS_OPENSSL} = "";
-}
-
-if (($config{GCCVER} eq "") || ($config{GCCMINOR} eq "")) {
- print $config{CC} . " was not found! You require g++ (the GNU C++ compiler, part of GCC) to build InspIRCd!\n";
- exit;
-}
-# Get and Set some important vars..
-getmodules();
+my %version = get_version $opt_distribution_label;
+say console_format "<|BOLD Configuring InspIRCd $version{FULL} on $^O.|>";
-sub clean
-{
- unlink(".config.cache");
-}
-
-our ($has_epoll, $has_ports, $has_kqueue) = (0, 0, 0);
-
-sub update
-{
- eval {
- chomp($topdir = getcwd());
- $this = resolve_directory($topdir); # PWD, Regardless.
- getmodules();
- # Does the cache file exist?
- if (!getcache()) {
- # No, No it doesn't.. *BASH*
- print "You have not run ./configure before. Please do this before trying to run the update script.\n";
- exit 0;
- } else {
- # We've Loaded the cache file and all our variables..
- print "Updating files...\n";
- getosflags();
- if (defined($opt_disable_debug) && $opt_disable_debug == 1)
- {
- print "Disabling debug information (-g).\n";
- $config{OPTIMISATI} = "";
- getosflags();
- }
- $has_epoll = $config{HAS_EPOLL};
- $has_ports = $config{HAS_PORTS};
- $has_kqueue = $config{HAS_KQUEUE};
- writefiles(1);
- makecache();
- print "Complete.\n";
- exit;
- }
- };
- if ($@)
- {
- print "Configure update failed: $@\n";
+my %config;
+if ($interactive) {
+ %config = read_config_file(CONFIGURE_CACHE_FILE);
+ run_test abs2rel(CONFIGURE_CACHE_FILE, $RealDir), %config;
+ if (!defined $config{VERSION}) {
+ $config{VERSION} = CONFIGURE_CACHE_VERSION;
+ } elsif ($config{VERSION} != CONFIGURE_CACHE_VERSION) {
+ print_warning "ignoring contents of ${\CONFIGURE_CACHE_FILE} as it was generated by an incompatible version of $0!";
+ %config = ('VERSION', CONFIGURE_CACHE_VERSION);
}
- exit;
}
-sub svnupdate
-{
- my $fail = 0;
- open(FH,"<.svn/entries") or $fail = 1;
- if ($fail) {
- print "This is not an SVN copy of InspIRCd.\n";
- exit 1;
- }
- else
- {
- close(FH);
- }
- open my $fd, "-|", "svn update";
- my $configurechanged = 0; # Needs ./configure -update
- my $rootincchanged = 0;
- my @conflicted = ();
- while (defined(my $line = <$fd>))
- {
- my ($action, $file);
- print $line;
- $line =~ m/^([ADUCG])\s+(.*)$/ or next;
- ($action, $file) = ($1, $2);
- if ($action eq "C")
- {
- push @conflicted, $file;
- if ($file eq "configure")
- {
- $configurechanged = 1;
- }
- elsif ($file =~ m/^\..*\.inc$/)
- {
- $rootincchanged = 1;
- }
- }
- elsif ($action eq "U" || $action eq "G")
- {
- if ($file eq "configure")
- {
- $configurechanged = 1;
- }
- elsif ($file =~ m/^\..*\.inc$/)
- {
- $rootincchanged = 1;
- }
- }
- }
- unless (close $fd) # close() waits for exit and returns false if the command failed
- {
- if ($! == 0)
- {
- print STDERR "Problem updating from SVN, please check above for errors\n";
- }
- else
- {
- print STDERR "Failed to run SVN: $!\n";
- }
- exit 1;
- }
- if (scalar(@conflicted) > 0)
- {
- print STDERR "\e[0;33;1mERROR:\e[0m You have local modifications which conflicted with the updates from SVN\n";
- print STDERR "Configure is not able to complete the update. Please resolve these conflicts, then run ./configure -update\n";
- print "Conflicted files: " . join ", ", @conflicted . "\n";
+$config{CXX} = find_compiler($config{CXX} // $ENV{CXX});
+unless ($config{CXX}) {
+ say 'A suitable C++ compiler could not be detected on your system!';
+ unless ($interactive) {
+ say 'Set the CXX environment variable to the path to a C++ compiler binary if this is incorrect.';
exit 1;
}
- if ($configurechanged)
- {
- system("perl configure -update");
- }
- else
- {
- print "No need to update Makefiles.\n";
- }
- if (defined $opt_rebuild) {
- system("make install");
- }
- exit;
-}
-
-sub test_compile {
- my $feature = shift;
- my $fail = 0;
- $fail ||= system "$config{CC} -o test_$feature make/check_$feature.cpp >/dev/null 2>&1";
- $fail ||= system "./test_$feature";
- unlink "test_$feature";
- return !$fail;
-}
-
-print "Running non-interactive configure...\n" unless $interactive;
-print "Checking for cache from previous configure... ";
-print ((!getcache()) ? "not found\n" : "found\n");
-print "Checking operating system version... ";
-print getosflags() . "\n";
-
-printf "Checking if stdint.h exists... ";
-$config{HAS_STDINT} = "true";
-our $fail = 0;
-open(STDINT, "</usr/include/stdint.h") or $config{HAS_STDINT} = "false";
-if ($config{HAS_STDINT} eq "true") {
- close(STDINT);
-}
-print "yes\n" if $config{HAS_STDINT} eq "true";
-print "no\n" if $config{HAS_STDINT} eq "false";
-
-printf "Checking if strlcpy exists... ";
-# Perform the strlcpy() test..
-$config{HAS_STRLCPY} = "false";
-$fail = 0;
-open(STRLCPY, "</usr/include/string.h") or $fail = 1;
-if (!$fail) {
- while (defined(my $line = <STRLCPY>)) {
- chomp($line);
- # try and find the delcaration of:
- # size_t strlcpy(...)
- if ($line =~ /size_t(\0x9|\s)+strlcpy/) {
- $config{HAS_STRLCPY} = "true";
- }
- }
- close(STRLCPY);
-}
-print "yes\n" if $config{HAS_STRLCPY} eq "true";
-print "no\n" if $config{HAS_STRLCPY} eq "false";
-
-printf "Checking if kqueue exists... ";
-$has_kqueue = 0;
-$fail = 0;
-open(KQUEUE, "</usr/include/sys/event.h") or $fail = 1;
-if (!$fail) {
- while (defined(my $line = <KQUEUE>)) {
- chomp($line);
- # try and find the delcaration of:
- # int kqueue(void);
- if ($line =~ /int(\0x9|\s)+kqueue/) {
- $has_kqueue = 1;
- }
- }
- close(KQUEUE);
-}
-print "yes\n" if $has_kqueue == 1;
-print "no\n" if $has_kqueue == 0;
-
-printf "Checking for epoll support... ";
-$has_epoll = test_compile('epoll');
-print $has_epoll ? "yes\n" : "no\n";
-
-printf "Checking for eventfd support... ";
-$config{HAS_EVENTFD} = test_compile('eventfd') ? 'true' : 'false';
-print $config{HAS_EVENTFD} eq 'true' ? "yes\n" : "no\n";
-
-printf "Checking if Solaris I/O completion ports are available... ";
-$has_ports = 0;
-our $system = `uname -s`;
-chomp ($system);
-$has_ports = 1 if ($system eq "SunOS");
-
-if ($has_ports) {
- my $kernel = `uname -r`;
- chomp($kernel);
- if (($kernel !~ /^5\.1./)) {
- $has_ports = 0;
- }
-}
-print "yes\n" if $has_ports == 1;
-print "no\n" if $has_ports == 0;
-
-$config{HAS_EPOLL} = $has_epoll;
-$config{HAS_KQUEUE} = $has_kqueue;
-
-printf "Checking for libgnutls... ";
-if (defined($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS}) || ($config{HAS_GNUTLS} eq "y"))) {
- if (defined($gnutls_ver) && ($gnutls_ver ne "")) {
- print "yes\n";
- $config{HAS_GNUTLS} = "y";
- } else {
- print "no\n";
- $config{HAS_GNUTLS} = "n";
- }
+ until ($config{CXX}) {
+ my $compiler_path = prompt_string 1, 'Please enter the path to a C++ compiler binary:', 'c++';
+ $config{CXX} = find_compiler $compiler_path;
+ }
+}
+my %compiler = get_compiler_info($config{CXX});
+
+$config{HAS_ARC4RANDOM_BUF} = run_test 'arc4random_buf()', test_file($config{CXX}, 'arc4random_buf.cpp');
+$config{HAS_CLOCK_GETTIME} = run_test 'clock_gettime()', test_file($config{CXX}, 'clock_gettime.cpp', $^O eq 'darwin' ? undef : '-lrt');
+$config{HAS_EVENTFD} = run_test 'eventfd()', test_file($config{CXX}, 'eventfd.cpp');
+
+my @socketengines;
+push @socketengines, 'epoll' if run_test 'epoll', test_header $config{CXX}, 'sys/epoll.h';
+push @socketengines, 'kqueue' if run_test 'kqueue', test_file $config{CXX}, 'kqueue.cpp';
+push @socketengines, 'poll' if run_test 'poll', test_header $config{CXX}, 'poll.h';
+push @socketengines, 'select';
+
+if (defined $opt_socketengine) {
+ unless (grep { $_ eq $opt_socketengine } @socketengines) {
+ my $reason = -f "src/socketengines/socketengine_$opt_socketengine.cpp" ? 'is not available on this platform' : 'does not exist';
+ print_error "The socket engine you requested ($opt_socketengine) $reason!",
+ 'Available socket engines are:',
+ map { " * $_" } @socketengines;
+ }
+}
+$config{SOCKETENGINE} = $opt_socketengine // $socketengines[0];
+
+if (defined $opt_portable) {
+ print_error '--portable and --system can not be used together!' if defined $opt_system;
+ $config{DESTDIR} = catfile $RealDir, 'run', '';
+ $config{BASE_DIR} = $opt_prefix // '';
+ $config{BINARY_DIR} = $opt_binary_dir // 'bin';
+ $config{CONFIG_DIR} = $opt_config_dir // 'conf';
+ $config{DATA_DIR} = $opt_data_dir // 'data';
+ $config{EXAMPLE_DIR} = $opt_example_dir // catdir $config{CONFIG_DIR}, 'examples';
+ $config{LOG_DIR} = $opt_log_dir // 'logs';
+ $config{MANUAL_DIR} = $opt_manual_dir // 'manuals';
+ $config{MODULE_DIR} = $opt_module_dir // 'modules';
+ $config{RUNTIME_DIR} = $opt_runtime_dir // $config{DATA_DIR};
+ $config{SCRIPT_DIR} = $opt_script_dir // $config{BASE_DIR};
+} elsif (defined $opt_system) {
+ $config{BASE_DIR} = $opt_prefix // '/';
+ $config{BINARY_DIR} = $opt_binary_dir // catdir $config{BASE_DIR}, 'usr/sbin';
+ $config{CONFIG_DIR} = $opt_config_dir // catdir $config{BASE_DIR}, 'etc/inspircd';
+ $config{DATA_DIR} = $opt_data_dir // catdir $config{BASE_DIR}, 'var/lib/inspircd';
+ $config{EXAMPLE_DIR} = $opt_example_dir // catdir $config{BASE_DIR}, 'usr/share/doc/inspircd';
+ $config{LOG_DIR} = $opt_log_dir // catdir $config{BASE_DIR}, 'var/log/inspircd';
+ $config{MANUAL_DIR} = $opt_manual_dir // catdir $config{BASE_DIR}, 'usr/share/man/man1';
+ $config{MODULE_DIR} = $opt_module_dir // catdir $config{BASE_DIR}, 'usr/lib/inspircd';
+ $config{RUNTIME_DIR} = $opt_runtime_dir // catdir $config{BASE_DIR}, 'var/run/inspircd';
+ $config{SCRIPT_DIR} = $opt_script_dir // catdir $config{BASE_DIR}, 'usr/share/inspircd';
} else {
- print "no\n";
- $config{HAS_GNUTLS} = "n";
-}
-
-printf "Checking for openssl... ";
-if (defined($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL}) || ($config{HAS_OPENSSL} eq "y"))) {
- if (defined($openssl_ver) && ($openssl_ver ne "")) {
- print "yes\n";
- $config{HAS_OPENSSL} = "y";
- } else {
- print "no\n";
- $config{HAS_OPENSSL} = "n";
- }
+ $config{BASE_DIR} = rel2abs $opt_prefix // $config{BASE_DIR} // catdir $RealDir, 'run';
+ $config{BINARY_DIR} = $opt_binary_dir // $config{BINARY_DIR} // catdir $config{BASE_DIR}, 'bin';
+ $config{CONFIG_DIR} = $opt_config_dir // $config{CONFIG_DIR} // catdir $config{BASE_DIR}, 'conf';
+ $config{DATA_DIR} = $opt_data_dir // $config{DATA_DIR} // catdir $config{BASE_DIR}, 'data';
+ $config{EXAMPLE_DIR} = $opt_example_dir // $config{EXAMPLE_DIR} // catdir $config{CONFIG_DIR}, 'examples';
+ $config{LOG_DIR} = $opt_log_dir // $config{LOG_DIR} // catdir $config{BASE_DIR}, 'logs';
+ $config{MANUAL_DIR} = $opt_manual_dir // $config{MANUAL_DIR} // catdir $config{BASE_DIR}, 'manuals';
+ $config{MODULE_DIR} = $opt_module_dir // $config{MODULE_DIR} // catdir $config{BASE_DIR}, 'modules';
+ $config{RUNTIME_DIR} = $opt_runtime_dir // $config{RUNTIME_DIR} // $config{DATA_DIR};
+ $config{SCRIPT_DIR} = $opt_script_dir // $config{SCRIPT_DIR} // $config{BASE_DIR};
+}
+
+# Parse --gid=123 or --gid=foo and extract the group id.
+my @group;
+if (defined $opt_gid) {
+ @group = $opt_gid =~ /^\d+$/ ? getgrgid($opt_gid) : getgrnam($opt_gid);
+ print_error "there is no '$opt_gid' group on this system!" unless @group;
} else {
- print "no\n";
- $config{HAS_OPENSSL} = "n";
-}
-
-printf "Checking if you are running an ancient, unsupported OS... ";
-if ($config{OSNAME} =~ /FreeBSD/i)
-{
- my $version = `uname -r`;
- if ($version =~ /^4\./)
- {
- my $foundit = `ls -l /usr/local/lib/libgnugetopt* | wc -l`;
- if ($foundit > 0)
- {
- # ICKY ICKY ICK, FREEBSD 4.x! GET AN UPGRADE!
- $config{CRAQ} = "-L/usr/local/lib -lgnugetopt -DHAVE_DECL_GETOPT=1";
- print "yes (upgrade ffs, freebsd 4 is *way* out of date)\n";
- }
- else
- {
- print "\n\nERROR: You require libgnugetopt (from ports or packages) to build InspIRCd on FreeBSD 4.11.\n";
- }
- }
- else
- {
- $config{CRAQ} = " ";
- print "no ($version)\n";
+ @group = $opt_system ? getgrnam('irc') : getgrgid($config{GID} // getgid());
+ print_error "you need to specify a group to run as using '--gid [id|name]'!" unless @group;
+ unless ($group[2]) {
+ print_warning <<"EOW";
+You are building as the privileged $group[0] group and have not specified
+an unprivileged group to run InspIRCd as.
+
+This is almost never what you should do. You should probably either create a new
+unprivileged user/group to build and run as or pass the '--gid [id|name]' flag
+to specify an unprivileged group to run as.
+EOW
+ if (!prompt_bool $interactive, "Are you sure you want to build as the $group[0] group?", 0) {
+ # PACKAGERS: You do not need to delete this check. Use `--gid $(id -g)` or `--gid 0` instead.
+ say STDERR "If you are sure you want to build as the $group[0] group pass the --gid $group[2] flag." unless $interactive;
+ exit 1;
+ }
+ }
+}
+$config{GROUP} = $group[0];
+$config{GID} = $group[2];
+
+# Parse --uid=123 or --uid=foo and extract the user id.
+my @user;
+if (defined $opt_uid) {
+ @user = $opt_uid =~ /^\d+$/ ? getpwuid($opt_uid) : getpwnam($opt_uid);
+ print_error "there is no '$opt_uid' user on this system!" unless @user;
+} else {
+ @user = $opt_system ? getpwnam('irc') : getpwuid($config{UID} // getuid());
+ print_error "you need to specify a user to run as using '--uid [id|name]'!" unless @user;
+ unless ($user[2]) {
+ print_warning <<"EOW";
+You are building as the privileged $user[0] user and have not specified
+an unprivileged user to run InspIRCd as.
+
+This is almost never what you should do. You should probably either create a new
+unprivileged user/group to build and run as or pass the '--uid [id|name]' flag
+to specify an unprivileged user to run as.
+EOW
+ if (!prompt_bool $interactive, "Are you sure you want to build as the $user[0] user?", 0) {
+ # PACKAGERS: You do not need to delete this check. Use `--uid $(id -u)` or `--uid 0` instead.
+ say STDERR "If you are sure you want to build as the $user[0] user pass the --uid $user[2] flag." unless $interactive;
+ exit 1;
+ }
+ }
+}
+$config{USER} = $user[0];
+$config{UID} = $user[2];
+
+# Warn the user about clock drifting when running on OpenVZ.
+if (-e '/proc/user_beancounters' || -e '/proc/vz/vzaquota') {
+ print_warning <<'EOW';
+You are building InspIRCd inside of an OpenVZ container. If you
+plan to use InspIRCd in this container then you should make sure that NTP is
+configured on the Hardware Node. Failure to do so may result in clock drifting!
+EOW
+}
+
+# Warn the user about OpenBSD shipping incredibly broken compilers/linkers.
+if ($^O eq 'openbsd') {
+ print_warning <<'EOW';
+You are building InspIRCd on OpenBSD. The C++ compilers and linkers
+that OpenBSD ship are incredibly broken. You may have strange linker errors
+and crashes. Please consider using a different OS like FreeBSD/NetBSD instead.
+EOW
+}
+
+# Warn about Perl versions that will not be supported in the future.
+if ($^V lt 'v5.26.0') {
+ print_warning <<"EOW";
+You are building InspIRCd with Perl $^V. This is very old and will
+not be supported by the next major version of InspIRCd. Please consider updating
+to Perl v5.26 or newer.
+EOW
+}
+
+# Warn about compiler versions that will not be supported in the future.
+my %future_compilers = (
+ AppleClang => version->parse('10.0'),
+ Clang => version->parse('5.0'),
+ GCC => version->parse('7.0'),
+);
+if (exists $future_compilers{$compiler{NAME}} && $compiler{VERSION} lt $future_compilers{$compiler{NAME}}) {
+ print_warning <<"EOW";
+You are building InspIRCd with $compiler{NAME} v$compiler{VERSION}. This is very old and
+will not be supported by the next major version of InspIRCd. Please consider
+updating to $compiler{NAME} v$future_compilers{$compiler{NAME}} or newer.
+EOW
+}
+
+# Check that the user actually wants this version.
+if (defined $version{REAL_LABEL}) {
+ print_warning <<'EOW';
+You are building a development version. This contains code which has
+not been tested as heavily and may contain various faults which could seriously
+affect the running of your server. It is recommended that you use a stable
+version instead.
+
+You can obtain the latest stable version from https://www.inspircd.org or by
+running `<|GREEN git checkout $(git describe --abbrev=0 --tags insp3)|>` if you are
+installing from Git.
+EOW
+ if (!prompt_bool $interactive, 'I understand this warning and want to continue anyway.', $opt_development // 0) {
+ say STDERR 'If you understand this warning and still want to continue pass the --development flag.' unless $interactive;
+ exit 1;
}
}
-else
-{
- $config{CRAQ} = " ";
- print "no ($config{OSNAME})\n";
-}
-
-print "Checking for upgrades to extra and third party modules... ";
-system "./modulemanager upgrade";
-
-################################################################################
-# BEGIN INTERACTIVE PART #
-################################################################################
-
-# Clear the Screen..
-if ($interactive)
-{
- print "\e[2J\e[0G\e[0d"; # J = Erase in Display, 2 = Entire Screen, (G, d) = Move cursor to (..,..)
- my $wholeos = $^O;
-
- my $rev = getrevision();
- # Display Introduction Message..
- print <<"STOP" ;
-Welcome to the \e[1mInspIRCd\e[0m Configuration program! (\e[1minteractive mode\e[0m)
-\e[1mPackage maintainers: Type ./configure --help for non-interactive help\e[0m
-
-*** If you are unsure of any of these values, leave it blank for ***
-*** standard settings that will work, and your server will run ***
-*** using them. Please consult your IRC network admin if in doubt. ***
-
-Press \e[1m<RETURN>\e[0m to accept the default for any option, or enter
-a new value. Please note: You will \e[1mHAVE\e[0m to read the docs
-dir, otherwise you won't have a config file!
-
-Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
-Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
-STOP
- if ($rev eq "r0") {
- print " (Non-SVN build)";
- }
- print ".\n\n";
-
- $config{CHANGE_COMPILER} = "n";
- print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
-
- while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
- print "\e[1;32mIMPORTANT!\e[0m A GCC 2.x compiler has been detected, and
-should NOT be used. You should probably specify a newer compiler.\n\n";
- yesno('CHANGE_COMPILER',"Do you want to change the compiler?");
- if ($config{CHANGE_COMPILER} =~ /y/i) {
- print "What command do you want to use to invoke your compiler?\n";
- print "[\e[1;32m$config{CC}\e[0m] -> ";
- chomp($config{CC} = <STDIN>);
- if ($config{CC} eq "") {
- $config{CC} = "g++";
- }
- chomp(my $foo = `$config{CC} -dumpversion | cut -c 1`);
- if ($foo ne "") {
- chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
- chomp($config{GCCMINOR} = `$config{CC} -dumpversion | cut -c 3`);
- print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
- if ($config{GCCVER} < 3) {
- print "\e[1;32mGCC 2.x WILL NOT WORK!\e[0m. Let's try that again, shall we?\n";
- }
- }
- else {
- print "\e[1;32mWARNING!\e[0m Could not execute the compiler you specified. You may want to try again.\n";
- }
- }
- }
- print "\n";
-
- # Directory Settings..
- my $tmpbase = $config{BASE_DIR};
- dir_check("do you wish to install the InspIRCd base", "BASE_DIR");
- if ($tmpbase ne $config{BASE_DIR}) {
- $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Dir
- $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
- $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
- $config{LIBRARY_DIR} = resolve_directory($config{BASE_DIR}."/lib"); # Library Directory
- }
-
- dir_check("are the configuration files", "CONFIG_DIR");
- dir_check("are the modules to be compiled to", "MODULE_DIR");
- dir_check("is the IRCd binary to be placed", "BINARY_DIR");
- dir_check("are the IRCd libraries to be placed", "LIBRARY_DIR");
-
- my $chose_hiperf = 0;
- if ($has_kqueue) {
- yesno('USE_KQUEUE',"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
- print "\n";
- if ($config{USE_KQUEUE} eq "y") {
- $chose_hiperf = 1;
- }
- }
- if ($has_epoll) {
- yesno('USE_EPOLL',"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
- print "\n";
- if ($config{USE_EPOLL} eq "y") {
- $chose_hiperf = 1;
- }
- }
- if ($has_ports) {
- yesno('USE_PORTS',"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
- print "\n";
- if ($config{USE_PORTS} eq "y") {
- $chose_hiperf = 1;
- }
- }
-
- if (!$chose_hiperf) {
- yesno('USE_POLL', "Would you like to use poll?\n This is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?\n");
- if ($config{USE_POLL} ne "y")
- {
- print "No high-performance socket engines are available, or you chose\n";
- print "not to enable one. Defaulting to select() engine.\n\n";
- }
- }
-
- yesno('IPV6',"Would you like to build InspIRCd with IPv6 support?");
- print "\n";
-
- if ($config{IPV6} eq "y") {
- print "You have chosen to build an \e[1;32mIPV6-enabled\e[0m server.\nTo accept IPV4 users, you can still use IPV4 addresses\nin your port bindings..\n\n";
- $config{SUPPORT_IP6LINKS} = "y";
+# Configure directory settings.
+my $question = <<"EOQ";
+Currently, InspIRCd is configured with the following paths:
+
+<|BOLD Binary:|> $config{BINARY_DIR}
+<|BOLD Config:|> $config{CONFIG_DIR}
+<|BOLD Data:|> $config{DATA_DIR}
+<|BOLD Log:|> $config{LOG_DIR}
+<|BOLD Manual:|> $config{MANUAL_DIR}
+<|BOLD Module:|> $config{MODULE_DIR}
+<|BOLD Script:|> $config{SCRIPT_DIR}
+
+Do you want to change these settings?
+EOQ
+if (prompt_bool $interactive, $question, 0) {
+ my $original_base_dir = $config{BASE_DIR};
+ $config{BASE_DIR} = prompt_dir $interactive, 'In what directory do you wish to install the InspIRCd base?', $config{BASE_DIR};
+ for my $key (qw(BINARY_DIR CONFIG_DIR DATA_DIR LOG_DIR MANUAL_DIR MODULE_DIR SCRIPT_DIR)) {
+ $config{$key} =~ s/^\Q$original_base_dir\E/$config{BASE_DIR}/;
+ }
+ $config{BINARY_DIR} = prompt_dir $interactive, 'In what directory should the InspIRCd binary be placed?', $config{BINARY_DIR};
+ $config{CONFIG_DIR} = prompt_dir $interactive, 'In what directory are configuration files to be stored?', $config{CONFIG_DIR};
+ $config{DATA_DIR} = prompt_dir $interactive, 'In what directory are variable data files to be stored?', $config{DATA_DIR};
+ $config{LOG_DIR} = prompt_dir $interactive, 'In what directory are log files to be stored?', $config{LOG_DIR};
+ $config{MANUAL_DIR} = prompt_dir $interactive, 'In what directory are manual pages to be placed?', $config{MANUAL_DIR};
+ $config{MODULE_DIR} = prompt_dir $interactive, 'In what directory are modules to be placed?', $config{MODULE_DIR};
+ $config{SCRIPT_DIR} = prompt_dir $interactive, 'In what directory are scripts to be placed?', $config{SCRIPT_DIR};
+ $config{EXAMPLE_DIR} = $config{CONFIG_DIR} . '/examples';
+ $config{RUNTIME_DIR} = $config{DATA_DIR};
+}
+
+# Configure module settings.
+$question = <<'EOQ';
+Currently, InspIRCd is configured to automatically enable all available extra modules.
+
+Would you like to enable extra modules manually?
+EOQ
+if (prompt_bool $interactive, $question, 0) {
+ for my $extra (<$RealDir/src/modules/extra/m_*.cpp>) {
+ my $module_name = module_shrink $extra;
+ if (prompt_bool $interactive, "Would you like to enable the <|BOLD $module_name|> module?", 0) {
+ enable_extras $module_name;
+ }
+ }
+} elsif (!defined $opt_disable_auto_extras) {
+ my %modules = (
+ 'm_argon2.cpp' => 'pkg-config --exists libargon2',
+ 'm_geo_maxmind.cpp' => 'pkg-config --exists libmaxminddb',
+ 'm_mysql.cpp' => 'mysql_config --version',
+ 'm_pgsql.cpp' => 'pg_config --version',
+ 'm_ldap.cpp' => "echo '#include <ldap.h>' | $config{CXX} -E -",
+ 'm_regex_pcre.cpp' => 'pcre-config --version',
+ 'm_regex_posix.cpp' => undef,
+ 'm_regex_re2.cpp' => 'pkg-config --exists re2',
+ 'm_regex_stdlib.cpp' => "$config{CXX} -o /dev/null -std=c++11 $RealDir/make/test/compiler.cpp",
+ 'm_regex_tre.cpp' => 'pkg-config --exists tre',
+ 'm_sqlite3.cpp' => 'pkg-config --exists sqlite3',
+ 'm_ssl_gnutls.cpp' => 'pkg-config --exists gnutls',
+ 'm_ssl_mbedtls.cpp' => "echo '#include <mbedtls/version.h>' | $config{CXX} -E -",
+ 'm_ssl_openssl.cpp' => 'pkg-config --exists openssl',
+ 'm_sslrehashsignal.cpp' => undef,
+ );
+ while (my ($module, $command) = each %modules) {
+ unless (defined $command && system "$command 1>/dev/null 2>/dev/null") {
+ enable_extras $module;
+ }
+ }
+}
+
+# Generate SSL certificates.
+$question = <<EOQ;
+Would you like to generate a self-signed SSL certificate now? This certificate
+can be used for testing but <|BOLD should not|> be used on a production network.
+
+Note: you can get a <|BOLD free|> CA-signed certificate from Let's Encrypt. See
+https://letsencrypt.org/getting-started/ for more details.
+EOQ
+
+if (<$RealDir/src/modules/m_ssl_*.cpp>) {
+ if (prompt_bool $interactive, $question, $interactive) {
+ create_directory CONFIGURE_DIRECTORY, 0750 or print_error "unable to create ${\CONFIGURE_DIRECTORY}: $!";
+ system './tools/genssl', 'auto', CONFIGURE_DIRECTORY;
} else {
- yesno('SUPPORT_IP6LINKS',"You have chosen to build an \e[1;32mIPV4-only\e[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers? If you are using a recent operating system and are\nunsure, answer yes. If you answer 'no' here, your InspIRCd server will\nbe unable to parse IPV6 addresses (e.g. for CIDR bans)\n\nEnable linking to servers which have IPV6 enabled?");
- print "\n";
- }
+ my @pems = <${\CONFIGURE_DIRECTORY}/{cert,csr,dhparams,key}.pem>;
+ $question = <<EOQ;
+The following self-signed files were previously generated and will be installed
+when you run Make. Do you want to delete them?
- $config{USE_FREEBSD_BASE_SSL} = "n";
- $config{USE_FREEBSD_PORTS_SSL} = "n";
- if ($config{HAS_OPENSSL_PORT} ne "")
- {
- $config{USE_FREEBSD_PORTS_SSL} = "y";
- print "I have detected the OpenSSL FreeBSD port installed on your system,\n";
- print "version \e[1;32m".$config{HAS_OPENSSL_PORT}."\e[0m. Your base system OpenSSL is version \e[1;32m".$openssl_ver."\e[0m.\n\n";
- yesno('USE_FREEBSD_PORTS_SSL', "Do you want to use the FreeBSD ports version?");
- print "\n";
- $config{USE_FREEBSD_BASE_SSL} = "y" if ($config{USE_FREEBSD_PORTS_SSL} eq "n");
-
- if ($config{USE_FREEBSD_BASE_SSL} eq "n")
- {
- # update to port version
- $openssl_ver = $config{HAS_OPENSSL_PORT};
+ * ${\join "\n * ", @pems}
+EOQ
+ if (@pems && prompt_bool $interactive, $question, 0) {
+ unlink @pems;
}
}
- else
- {
- $config{USE_FREEBSD_BASE_SSL} = "y" if ($^O eq "freebsd");
- }
+} elsif (!defined $opt_disable_auto_extras) {
+ print_warning <<"EOM";
+You are building without enabling any SSL modules. This is not
+recommended as SSL greatly enhances the security and privacy of your IRC server
+and in a future version will be <|BOLD required|> for linking servers.
- $config{USE_SSL} = "n";
-
- if ($config{HAS_GNUTLS} eq "y" || $config{HAS_OPENSSL} eq "y")
- {
- print "Detected GnuTLS version: \e[1;32m" . $gnutls_ver . "\e[0m\n";
- print "Detected OpenSSL version: \e[1;32m" . $openssl_ver . "\e[0m\n\n";
-
- yesno('USE_SSL', "One or more SSL libraries detected. Would you like to enable SSL support?");
- if ($config{USE_SSL} eq "y")
- {
- if ($config{HAS_GNUTLS} eq "y")
- {
- yesno('USE_GNUTLS',"Would you like to enable SSL with m_ssl_gnutls? (recommended)");
- if ($config{USE_GNUTLS} eq "y")
- {
- print "\nUsing GnuTLS SSL module.\n";
- }
- }
+Please read the following documentation pages on how to enable SSL support:
- if ($config{HAS_OPENSSL} eq "y")
- {
- yesno('USE_OPENSSL', "Would you like to enable SSL with m_ssl_openssl?");
- if ($config{USE_OPENSSL} eq "y")
- {
- print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
- }
- }
- }
- }
- else
- {
- print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed if\n";
- print "you intend to use OpenSSL, or that GnuTLS is in your path if you intend\nto use GnuTLS.\n\n";
- }
+GnuTLS (recommended): https://docs.inspircd.org/3/modules/ssl_gnutls
+mbedTLS: https://docs.inspircd.org/3/modules/ssl_mbedtls
+OpenSSL: https://docs.inspircd.org/3/modules/ssl_openssl
+EOM
}
-dumphash();
+# Cache the distribution label so that its not lost when --update is run.
+$config{DISTRIBUTION} = $opt_distribution_label if $opt_distribution_label;
-if (($config{USE_GNUTLS} eq "y") && ($config{HAS_GNUTLS} ne "y"))
-{
- print "Sorry, but i couldn't detect gnutls. Make sure gnutls-config is in your path.\n";
- exit(0);
-}
-if (($config{USE_OPENSSL} eq "y") && ($config{HAS_OPENSSL} ne "y"))
-{
- print "Sorry, but i couldn't detect openssl. Make sure openssl is in your path.\n";
- exit(0);
-}
-our $failed = 0;
+write_configure_cache %config;
+parse_templates \%config, \%compiler, \%version;
-$config{CERTGEN} ||= 'y';
-yesno('CERTGEN',"Would you like generate SSL certificates now?") if ($interactive && ($config{USE_GNUTLS} eq "y" || $config{USE_OPENSSL} eq "y"));
+print console_format <<"EOM";
-if ($config{USE_GNUTLS} eq "y") {
- unless (-r "src/modules/m_ssl_gnutls.cpp") {
- print "Symlinking src/modules/m_ssl_gnutls.cpp from extra/\n";
- symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!";
- }
- if ($interactive && $config{CERTGEN} eq 'y')
- {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL Certificates Not found, Generating.. \n\n
-*************************************************************
-* Generating the Private Key may take some time, go grab a *
-* Coffee. Even better, to generate some more entropy if it *
-* is taking a while, open another console and type du / a *
-* few times and get that HD going :) Then answer the *
-* Questions which follow. If you are unsure, just hit enter *
-*************************************************************\n\n";
- $failed = make_gnutls_cert();
- if ($failed) {
- print "\n\e[1;32mCertificate generation failed!\e[0m\n\n";
- } else {
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- print "Done.\n\n";
- }
- }
- else {
- print "SSL Certificates found, skipping.\n\n";
- }
- }
- else
- {
- print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
- }
-}
+Configuration is complete! You have chosen to build with the following settings:
-if ($config{USE_OPENSSL} eq "y") {
- unless (-r "src/modules/m_ssl_openssl.cpp") {
- print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
- symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!";
- }
- $failed = 0;
- if ($interactive && $config{CERTGEN} eq 'y')
- {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL Certificates Not found, Generating.. \n\n
-*************************************************************
-* Generating the certificates may take some time, go grab a *
-* coffee, or something. *
-*************************************************************\n\n";
- make_openssl_cert();
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
- print "Done.\n\n";
- } else {
- print "SSL Certificates found, skipping.\n\n"
- }
- }
- else
- {
- print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
- }
-}
-if (($config{USE_GNUTLS} eq "n") && ($config{USE_OPENSSL} eq "n")) {
- print "Skipping SSL Certificate generation, SSL support is not available.\n\n";
-}
-
-getosflags();
-writefiles(1);
-makecache();
-
-print "\n\n";
-print "To build your server with these settings, please type '\e[1;32m$config{MAKEPROG}\e[0m' now.\n";
-if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
- print "Please note: for \e[1;32mSSL support\e[0m you will need to load required\n";
- print "modules in your config. This configure script has added those modules to the\n";
- print "build process. For more info please refer to:\n";
- print "\e[1;32mhttp://wiki.inspircd.org/Installation_From_Tarball\e[0m\n";
-}
-print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n\n";
-if (($config{OSNAME} eq "OpenBSD") && ($config{CC} ne "eg++")) {
- print "\e[1;32mWARNING!\e[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but i'm letting you\ngo ahead with it anyway, just in case i'm wrong :-)\n";
-}
-
-if ($config{GCCVER} < "3") {
- print <<FOO2;
-\e[1;32mWARNING!\e[0m You are attempting to compile InspIRCd on GCC 2.x!
-GCC 2.x series compilers only had partial (read as broken) C++ support, and
-your compile will most likely fail horribly! If you have any problems, do NOT
-report them to the bugtracker or forums without first upgrading your compiler
-to a newer 3.x or 4.x (or whatever is available currently) version.
-FOO2
-}
-
-################################################################################
-# HELPER FUNCTIONS #
-################################################################################
-sub getcache {
- # Retrieves the .config.cache file, and loads values into the main config hash.
- open(CACHE, ".config.cache") or return 0;
- while (<CACHE>) {
- chomp;
- # Ignore Blank lines, and comments..
- next if /^\s*$/;
- next if /^\s*#/;
- my ($key, $value) = split("=", $_, 2);
- $value =~ /^\"(.*)\"$/;
- # Do something with data here!
- $config{$key} = $1;
- }
- close(CACHE);
- return 1;
-}
-
-sub makecache {
- # Dump the contents of %config
- print "Writing \e[1;32mcache file\e[0m for future ./configures ...\n";
- open(FILEHANDLE, ">.config.cache");
- foreach my $key (keys %config) {
- print FILEHANDLE "$key=\"$config{$key}\"\n";
- }
- close(FILEHANDLE);
-}
+<|GREEN Compiler:|>
+ <|GREEN Binary:|> $config{CXX}
+ <|GREEN Name:|> $compiler{NAME}
+ <|GREEN Version:|> $compiler{VERSION}
-sub dir_check {
- my ($desc, $hash_key) = @_;
- my $complete = 0;
- while (!$complete) {
- print "In what directory $desc?\n";
- print "[\e[1;32m$config{$hash_key}\e[0m] -> ";
- chomp(my $var = <STDIN>);
- if ($var eq "") {
- $var = $config{$hash_key};
- }
- if ($var =~ /^\~\/(.+)$/) {
- # Convert it to a full path..
- $var = resolve_directory($ENV{HOME} . "/" . $1);
- }
- elsif ((($config{OSNAME} =~ /MINGW32/i) and ($var !~ /^[A-Z]{1}:\\.*/)) and (substr($var,0,1) ne "/"))
- {
- # Assume relative Path was given.. fill in the rest.
- $var = $this . "/$var";
- }
+<|GREEN Extra Modules:|>
+EOM
- $var = resolve_directory($var);
- if (! -e $var) {
- print "$var does not exist. Create it?\n[\e[1;32my\e[0m] ";
- chomp(my $tmp = <STDIN>);
- if (($tmp eq "") || ($tmp =~ /^y/i)) {
- # Attempt to Create the Dir..
- my $chk = eval {
- use File::Path ();
- File::Path::mkpath($var, 0, 0777);
- 1;
- };
- unless (defined($chk) && -d $var) {
- print "Unable to create directory. ($var)\n\n";
- # Restart Loop..
- next;
- }
- } else {
- # They said they don't want to create, and we can't install there.
- print "\n\n";
- next;
- }
- } else {
- if (!is_dir($var)) {
- # Target exists, but is not a directory.
- print "File $var exists, but is not a directory.\n\n";
- next;
- }
- }
- # Either Dir Exists, or was created fine.
- $config{$hash_key} = $var;
- $complete = 1;
- print "\n";
- }
+for my $file (<$RealDir/src/modules/m_*>) {
+ say " * ${\module_shrink $file}" if -l $file;
}
-our $SHARED = "";
+my @makeargs;
+push @makeargs, "-C${\abs2rel $RealDir}" unless getcwd eq $RealDir;
+push @makeargs, "-j${\(get_cpu_count() + 1)}";
-sub getosflags {
+print console_format <<"EOM";
- # Beware: Linux sets it's own cflags below for some retarded reason
- $config{LDLIBS} = "-pthread -lstdc++";
- $config{FLAGS} = "-pipe -fPIC -Woverloaded-virtual -Wshadow -Wformat=2 -Wmissing-format-attribute -Wall $config{OPTIMISATI}";
- $config{DEVELOPER} = "-pipe -fPIC -Woverloaded-virtual -Wshadow -Wall -Wformat=2 -Wmissing-format-attribute -g";
- $SHARED = "-shared -export-dynamic";
- $config{MAKEPROG} = "make";
+<|GREEN Paths:|>
+ <|GREEN Binary:|> $config{BINARY_DIR}
+ <|GREEN Config:|> $config{CONFIG_DIR}
+ <|GREEN Data:|> $config{DATA_DIR}
+ <|GREEN Example:|> $config{EXAMPLE_DIR}
+ <|GREEN Log:|> $config{LOG_DIR}
+ <|GREEN Manual:|> $config{MANUAL_DIR}
+ <|GREEN Module:|> $config{MODULE_DIR}
+ <|GREEN Runtime:|> $config{RUNTIME_DIR}
+ <|GREEN Script:|> $config{SCRIPT_DIR}
- if ($config{OSNAME} =~ /darwin/i) {
- $config{FLAGS} = "-pipe -DDARWIN -frtti -fPIC -Wall $config{OPTIMISATI}";
- $SHARED = "-bundle -twolevel_namespace -undefined dynamic_lookup";
- $config{LDLIBS} = "-ldl -pthread -lstdc++";
- }
+<|GREEN Execution Group:|> $config{GROUP} ($config{GID})
+<|GREEN Execution User:|> $config{USER} ($config{UID})
+<|GREEN Socket Engine:|> $config{SOCKETENGINE}
- if ($config{OSNAME} =~ /OpenBSD/i) {
- $config{MAKEPROG} = "gmake";
-# apparantly (Dagonet says) that this causes problems, so let's try without it.
-# $config{LDLIBS} = $config{LDLIBS} . " -lunwind";
- chomp(my $foo = `eg++ -dumpversion | cut -c 1`);
- # theyre running the package version of gcc (eg++)... detect it and set up its version numbers.
- # if theyre not running this, configure lets the build continue but they probably wont manage to
- # compile as this standard version is 2.95.3!
- if ($foo ne "") {
- $config{CC} = "eg++";
- chomp($config{GCCVER} = `eg++ -dumpversion | cut -c 1`); # we must redo these if we change the compiler path
- chomp($config{GCCMINOR} = `eg++ -dumpversion | cut -c 3`);
- }
- return "OpenBSD";
- }
+To build with these settings run '<|GREEN make ${\join ' ', @makeargs} install|>' now.
- if ($config{OSNAME} =~ /Linux/i) {
- $config{LDLIBS} = "-ldl -lstdc++ -pthread";
-# $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wall $config{OPTIMISATI}";
- $config{FLAGS} .= " " . $ENV{CXXFLAGS} if exists($ENV{CXXFLAGS});
- $config{LDLIBS} .= " " . $ENV{LDLIBS} if exists($ENV{LDLIBS});
- $config{LDLIBS} .= " " . $ENV{LDFLAGS} if exists($ENV{LDFLAGS});
- $config{MAKEPROG} = "make";
- }
-
- if ($config{OSNAME} =~ /FreeBSD/i) {
- $config{FLAGS} .= " " . $ENV{CXXFLAGS} if exists($ENV{CXXFLAGS});
- $config{LDLIBS} .= " " . $ENV{LDLIBS} if exists($ENV{LDLIBS});
- $config{LDLIBS} .= " " . $ENV{LDFLAGS} if exists($ENV{LDFLAGS});
- }
-
- if ($config{OSNAME} =~ /SunOS/i or $config{OSNAME} =~ /solaris/i)
- {
- # solaris/sunos needs these
- # socket = bsd sockets api
- # nsl = dns stuff
- # rt = POSIX realtime extensions
- # resolv = inet_aton only (why isnt this in nsl?!)
- $config{MAKEPROG} = "gmake";
- $config{LDLIBS} .= " -lsocket -lnsl -lrt -lresolv -pthread";
- return "Solaris";
- }
-
- if($config{OSNAME} =~ /MINGW32/i)
- {
- # All code is position-independent on windows
- $config{FLAGS} =~ s/-fPIC //;
- return "MinGW";
- }
-
- return $config{OSNAME};
-}
-
-my ($mliflags, $mfrules, $mobjs, $mfcount) = ("", "", "", 0);
-
-sub writefiles {
- my($writeheader) = @_;
- # First File.. inspircd_config.h
- chomp(my $incos = `uname -n -s -r`);
- chomp(my $version = `sh src/version.sh`);
- chomp(my $revision2 = getrevision());
- if ($writeheader == 1)
- {
- print "Writing \e[1;32minspircd_config.h\e[0m\n";
- open(FILEHANDLE, ">include/inspircd_config.h.tmp");
- print FILEHANDLE <<EOF;
-/* Auto generated by configure, do not modify! */
-#ifndef __CONFIGURATION_AUTO__
-#define __CONFIGURATION_AUTO__
-
-/* this is for windows support. */
-#define CoreExport /**/
-#define DllExport /**/
-
-#define CONFIG_FILE "$config{CONFIG_DIR}/inspircd.conf"
-#define MOD_PATH "$config{MODULE_DIR}"
-#define SOMAXCONN_S "$config{_SOMAXCONN}"
-#define OPTIMISATION $config{OPTIMITEMP}
-#define LIBRARYDIR "$config{LIBRARY_DIR}"
-#define ENTRYPOINT int main(int argc, char** argv)
-
-EOF
-print FILEHANDLE "#define MAXBUF " . ($config{MAXBUF}+2) . "\n";
-
- if ($config{OSNAME} =~ /SunOS/i) {
- print FILEHANDLE "#define IS_SOLARIS\n";
- }
- if ($config{OSNAME} =~ /MINGW32/i) {
- print FILEHANDLE "#define IS_MINGW\n";
- }
- if ($config{GCCVER} >= 3) {
- print FILEHANDLE "#define GCC3\n";
- }
- if (
- (($config{GCCVER} == 4) && ($config{GCCMINOR} >= 3))
- ||
- ($config{GCCVER} > 4)
- ) {
- print FILEHANDLE "#define HASHMAP_DEPRECATED\n";
- }
- if ($config{HAS_STRLCPY} eq "true") {
- print FILEHANDLE "#define HAS_STRLCPY\n";
- }
- if ($config{HAS_STDINT} eq "true") {
- print FILEHANDLE "#define HAS_STDINT\n";
- }
- if ($config{IPV6} =~ /y/i) {
- print FILEHANDLE "#define IPV6\n";
- }
- if ($config{SUPPORT_IP6LINKS} =~ /y/i) {
- print FILEHANDLE "#define SUPPORT_IP6LINKS\n";
- }
- if ($config{HAS_EVENTFD} eq 'true') {
- print FILEHANDLE "#define HAS_EVENTFD\n";
- }
- my $use_hiperf = 0;
- if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
- print FILEHANDLE "#define USE_KQUEUE\n";
- $config{SOCKETENGINE} = "socketengine_kqueue";
- $use_hiperf = 1;
- }
- if (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
- print FILEHANDLE "#define USE_EPOLL\n";
- $config{SOCKETENGINE} = "socketengine_epoll";
- $use_hiperf = 1;
- }
- if (($has_ports) && ($config{USE_PORTS} eq "y")) {
- print FILEHANDLE "#define USE_PORTS\n";
- $config{SOCKETENGINE} = "socketengine_ports";
- $use_hiperf = 1;
- }
- # user didn't choose either epoll or select for their OS.
- # default them to USE_SELECT (ewwy puke puke)
- if (!$use_hiperf) {
- print "no hi-perf, " . $config{USE_POLL};
- if ($config{USE_POLL} eq "y")
- {
- print FILEHANDLE "#define USE_POLL\n";
- $config{SOCKETENGINE} = "socketengine_poll";
- }
- else
- {
- print FILEHANDLE "#define USE_SELECT\n";
- $config{SOCKETENGINE} = "socketengine_select";
- }
- }
- print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n\n#endif\n";
- close(FILEHANDLE);
-
- open(FILEHANDLE, ">include/inspircd_se_config.h.tmp");
- print FILEHANDLE <<EOF;
-/* Auto generated by configure, do not modify or commit to svn! */
-#ifndef __CONFIGURATION_SOCKETENGINE__
-#define __CONFIGURATION_SOCKETENGINE__
-
-#include "socketengines/$config{SOCKETENGINE}.h"
-
-#endif
-EOF
- close(FILEHANDLE);
-
- open(FILEHANDLE, ">include/inspircd_version.h.tmp");
- print FILEHANDLE <<EOF;
-#define VERSION "$version"
-#define REVISION "$revision2"
-#define SYSTEM "$incos"
-EOF
- close FILEHANDLE;
-
- for my $file (qw(include/inspircd_config.h include/inspircd_se_config.h include/inspircd_version.h)) {
- my $diff = 0;
- open my $fh1, $file or $diff = 1;
- open my $fh2, $file.'.tmp' or die "Can't read $file.tmp that we just wrote: $!";
- while (!$diff) {
- my $line1 = <$fh1>;
- my $line2 = <$fh2>;
- if (defined($line1) != defined($line2)) {
- $diff = 1;
- } elsif (!defined $line1) {
- last;
- } else {
- $diff = ($line1 ne $line2);
- }
- }
- if ($diff) {
- unlink $file;
- rename "$file.tmp", $file;
- } else {
- unlink "$file.tmp";
- }
- }
- }
-
- # Write all .in files.
- my $tmp = "";
- my $file = "";
- my $exe = "inspircd";
-
- # Do this once here, and cache it in the .*.inc files,
- # rather than attempting to read src/version.sh from
- # compiled code -- we might not have the source to hand.
- # Fix for bug#177 by Brain.
-
- chomp($version = `sh ./src/version.sh`);
- chomp(my $revision = getrevision());
- $version = "$version(r$revision)";
-
- # We can actually parse any file starting with . and ending with .inc,
- # but right now we only parse .inspircd.inc to form './inspircd'
- prepare_dynamic_makefile();
-
- print "Writing \e[1;32mMakefiles\e[0m\n";
-
- opendir(DIRHANDLE, $this);
-
- foreach my $name (sort readdir(DIRHANDLE)) {
- if ($name =~ /^\.(.+)\.inc$/) {
- $file = $1;
-
- # Bug #353, omit this on non-darwin
- next if (($config{OSNAME} !~ /darwin/) && ($file eq "org.inspircd.plist"));
-
- # All .name.inc files need parsing!
- open(FILEHANDLE, ".$file.inc") or die ("Can't open .$file.inc");
- $_ = join '', <FILEHANDLE>;
- close(FILEHANDLE);
-
- print "Writing \e[1;32m$file\e[0m ...\n";
- for my $var (qw(
- CC FLAGS DEVELOPER LDLIBS BASE_DIR CONFIG_DIR MODULE_DIR BINARY_DIR LIBRARY_DIR
- STARTSCRIPT DESTINATION EXTRA_DIR SOCKETENGINE CORE_FLAGS
- )) {
- s/\@$var\@/$config{$var}/g;
- }
- s/\@EXECUTABLE\@/$exe/ if defined $exe;
- s/\@VERSION\@/$version/ if defined $version;
-
- if ($file eq 'Makefile') {
- my $mk_tmp = $_;
- s/\@IFDEF (\S+)/ifdef $1/g;
- s/\@IFNDEF (\S+)/ifndef $1/g;
- s/\@ELSE/else/g;
- s/\@ENDIF/endif/g;
- s/ *\@BSD_ONLY .*\n//g;
- s/\@GNU_ONLY //g;
- s/\@DO_EXPORT (.*)/export $1/g;
- open MKF, '>GNUmakefile' or die "Can't write to GNUmakefile: $!";
- print MKF $_;
- close MKF;
- $_ = $mk_tmp;
- s/\@IFDEF (\S+)/.if defined($1)/g;
- s/\@IFNDEF (\S+)/.if !defined($1)/g;
- s/\@ELSE/.else/g;
- s/\@ENDIF/.endif/g;
- s/\@BSD_ONLY //g;
- s/ *\@GNU_ONLY .*\n//g;
- $mk_tmp = $_;
- $mk_tmp =~ s#\@DO_EXPORT (.*)#"MAKEENV += ".join ' ', map "$_='\${$_}'", split /\s/, $1#eg;
- open MKF, '>BSDmakefile' or die "Can't write to BSDmakefile: $!";
- print MKF $mk_tmp;
- close MKF;
- } else {
- open(FILEHANDLE, ">$file") or die("Can't write to $file: $!\n");
- print FILEHANDLE $_;
- close(FILEHANDLE);
- }
- }
- }
- closedir(DIRHANDLE);
-
- # Make inspircd executable!
- chmod 0744, 'inspircd';
-}
-
-sub prepare_dynamic_makefile
-{
- my $i = 0;
-
- if (!$has_epoll)
- {
- $config{USE_EPOLL} = 0;
- }
- if (!$has_kqueue)
- {
- $config{USE_KQUEUE} = 0;
- }
- if (!$has_ports)
- {
- $config{USE_PORTS} = 0;
- }
-
- if ($config{IS_DARWIN} eq "YES")
- {
- $config{CORE_FLAGS} = '-dynamic -bind_at_load -L.';
- }
- else
- {
- $config{CORE_FLAGS} = (defined $config{CRAQ} ? $config{CRAQ}. ' ' : "").'-rdynamic -L.'
- }
-}
+EOM
# Routine to list out the extra/ modules that have been enabled.
# Note: when getting any filenames out and comparing, it's important to lc it if the
my @sources = map { File::Spec->case_tolerant() ? lc($_) : $_ } (readdir($dd));
closedir $dd;
undef $dd;
- my $maxlen = (sort { $b <=> $a } (map {length($_)} (@extras)))[0];
+ my $maxlen = (sort { $b <=> $a } (map { length module_shrink $_ } (@extras)))[0];
my %extras = ();
EXTRA: for my $extra (@extras) {
next if (File::Spec->curdir() eq $extra || File::Spec->updir() eq $extra);
- next if ($extra eq '.svn');
my $abs_extra = File::Spec->catfile($abs_srcdir, "extra", $extra);
my $abs_source = File::Spec->catfile($abs_srcdir, $extra);
next unless ($extra =~ m/\.(cpp|h)$/ || (-d $abs_extra)); # C++ Source/Header, or directory
for my $extra (keys(%extras)) {
next unless $extras{$extra} =~ m/enabled/; # only process enabled extras.
my $abs_extra = File::Spec->catfile($abs_srcdir, "extra", $extra);
- my @deps = split / +/, getdependencies($abs_extra);
+ my @deps = split /\s+/, get_directive($abs_extra, 'ModDep', '');
for my $dep (@deps) {
if (exists($extras{$dep})) {
my $ref = \$extras{$dep}; # Take reference.
for my $extra (sort {$a cmp $b} keys(%extras)) {
my $text = $extras{$extra};
if ($text =~ m/needed by/ && $text !~ m/enabled/) {
- printf "\e[31;1;5m%-*s = %s%s\e[0m\n", $maxlen, $extra, $text, ($text =~ m/needed by/ ? ")" : "");
+ printf "\e[31;1;5m%-*s = %s%s\e[0m\n", $maxlen, module_shrink($extra), $text, ($text =~ m/needed by/ ? ")" : "");
} else {
- printf "%-*s = %s%s\n", $maxlen, $extra, $text, ($text =~ m/needed by/ ? "\e[0m)" : "");
+ printf "%-*s = %s%s\n", $maxlen, module_shrink($extra), $text, ($text =~ m/needed by/ ? "\e[0m)" : "");
}
}
return keys(%extras) if wantarray; # Can be used by manage_extras.
}
-sub enable_extras (@) {
- my (@extras) = @_;
- for my $extra (@extras) {
- my $extrapath = "src/modules/extra/$extra";
- if (!-e $extrapath) {
- print STDERR "Cannot enable \e[32;1m$extra\e[0m : No such file or directory in src/modules/extra\n";
- next;
- }
- my $source = "src/modules/$extra";
- if (-e $source) {
- print STDERR "Cannot enable \e[32;1m$extra\e[0m : destination in src/modules exists (might already be enabled?)\n";
- next;
+sub enable_extras(@) {
+ my $moduledir = catdir $RealDir, 'src', 'modules';
+ my $extradir = catdir $moduledir, 'extra';
+
+ for my $extra (@_) {
+ my $shortname = module_shrink $extra;
+ my $extrafile = module_expand $extra;
+
+ my $extrapath = catfile $extradir, $extrafile;
+ if (!-f $extrapath) {
+ print_error "<|GREEN $extra|> is not an extra module!";
}
- # Get dependencies, and add them to be processed.
- my @deps = split / +/, getdependencies($extrapath);
- for my $dep (@deps) {
- next if scalar(grep { $_ eq $dep } (@extras)) > 0; # Skip if we're going to be enabling it anyway.
- if (!-e "src/modules/$dep") {
- if (-e "src/modules/extra/$dep") {
- print STDERR "Will also enable extra \e[32;1m$dep\e[0m (needed by \e[32;1m$extra\e[0m)\n";
- push @extras, $dep;
- } else {
- print STDERR "\e[33;1mWARNING:\e[0m module \e[32;1m$extra\e[0m might be missing dependency \e[32;1m$dep\e[0m - YOU are responsible for satisfying it!\n";
- }
+
+ my $modulepath = catfile $moduledir, $extrafile;
+ if (-l $modulepath) {
+ if (readlink($modulepath) ne $extrapath) {
+ unlink $modulepath; # Remove the dead symlink.
+ } else {
+ next; # Module is already enabled.
}
}
- print "Enabling $extra ... \n";
- symlink "extra/$extra", $source or print STDERR "$source: Cannot link to 'extra/$extra': $!\n";
+
+ if (-e $modulepath) {
+ print_error "unable to symlink <|GREEN ${\abs2rel $modulepath}|> to <|GREEN ${\abs2rel $extrapath}|>: the target exists and is not a symlink.";
+ } else {
+ say console_format "Enabling the <|GREEN $shortname|> module ...";
+ symlink $extrapath, $modulepath or print_error "unable to symlink <|GREEN ${\abs2rel $modulepath}|> to <|GREEN ${\abs2rel $extrapath}|>: $!";
+ }
}
}
-sub disable_extras (@)
-{
- opendir my $dd, "src/modules/extra/";
- my @files = readdir($dd);
- closedir $dd;
- my (@extras) = @_;
-EXTRA: for my $extra (@extras) {
- my $extrapath = "src/modules/extra/$extra";
- my $source = "src/modules/$extra";
- if (!-e $extrapath) {
- print STDERR "Cannot disable \e[32;1m$extra\e[0m : Is not an extra\n";
- next;
- }
- if ((! -l $source) || readlink($source) ne "extra/$extra") {
- print STDERR "Cannot disable \e[32;1m$extra\e[0m : Source is not a link or doesn't refer to the right file. Remove manually if this is in error.\n";
- next;
- }
- # Check if anything needs this.
- for my $file (@files) {
- my @deps = split / +/, getdependencies("src/modules/extra/$file");
- # File depends on this extra...
- if (scalar(grep { $_ eq $extra } @deps) > 0) {
- # And is both enabled and not about to be disabled.
- if (-e "src/modules/$file" && scalar(grep { $_ eq $file } @extras) < 1) {
- print STDERR "Cannot disable \e[32;1m$extra\e[0m : is needed by \e[32;1m$file\e[0m\n";
- next EXTRA;
- }
- }
+sub disable_extras(@) {
+ my $moduledir = catdir $RealDir, 'src', 'modules';
+ my $extradir = catdir $moduledir, 'extra';
+
+ for my $extra (@_) {
+ my $shortname = module_shrink $extra;
+ my $extrafile = module_expand $extra;
+
+ my $modulepath = catfile $moduledir, $extrafile;
+ my $extrapath = catfile $extradir, $extrafile;
+ if (!-e $modulepath && !-e $extrapath) {
+ print_error "the <|GREEN $shortname|> module does not exist!";
+ } elsif (!-e $modulepath && -e $extrapath) {
+ print_error "the <|GREEN $shortname|> module is not currently enabled!";
+ } elsif ((-e $modulepath && !-e $extrapath) || !-l $modulepath) {
+ print_error "the <|GREEN $shortname|> module is not an extra module!";
+ } else {
+ say console_format "Disabling the <|GREEN $shortname|> module ...";
+ unlink $modulepath or print_error "unable to unlink <|GREEN $extrapath|>: $!";
}
- # Now remove.
- print "Disabling $extra ... \n";
- unlink "src/modules/$extra" or print STDERR "Cannot disable \e[32;1m$extra\e[0m : $!\n";
}
}
projects / user / henk / code / inspircd.git / blobdiff