#!/usr/bin/env perl
-
#
# InspIRCd -- Internet Relay Chat Daemon
#
-# Copyright (C) 2009-2010 Daniel De Graaf <danieldg@inspircd.org>
-# Copyright (C) 2007, 2009 Dennis Friis <peavey@inspircd.org>
-# Copyright (C) 2003, 2006-2008 Craig Edwards <craigedwards@brainbox.cc>
-# Copyright (C) 2006-2008 Robin Burchell <robin+git@viroteck.net>
+# Copyright (C) 2020 Nicole Kleinhoff <ilbelkyr@shalture.org>
+# Copyright (C) 2020 Daniel Vassdal <shutter@canternet.org>
+# Copyright (C) 2019 Matt Schatz <genius3000@g3k.solutions>
+# Copyright (C) 2013-2021 Sadie Powell <sadie@witchery.services>
+# Copyright (C) 2012, 2019 Robby <robby@chatbelgie.be>
+# Copyright (C) 2012 ChrisTX <xpipe@hotmail.de>
+# Copyright (C) 2010 Daniel De Graaf <danieldg@inspircd.org>
# Copyright (C) 2008 Thomas Stagner <aquanight@inspircd.org>
-# Copyright (C) 2007 John Brooks <john.brooks@dereferenced.net>
-# Copyright (C) 2006 Oliver Lupton <oliverlupton@gmail.com>
-# Copyright (C) 2003-2006 Craig McLure <craig@chatspike.net>
+# Copyright (C) 2008 Robin Burchell <robin+git@viroteck.net>
+# Copyright (C) 2007 Dennis Friis <peavey@inspircd.org>
+# Copyright (C) 2006-2008 Craig Edwards <brain@inspircd.org>
#
# This file is part of InspIRCd. InspIRCd is free software: you can
# redistribute it and/or modify it under the terms of the GNU General Public
#
-BEGIN {
- require 5.8.0;
-}
-
+use v5.10.0;
use strict;
use warnings FATAL => qw(all);
-use File::Copy ();
-use File::Spec::Functions qw(rel2abs);
-use Cwd;
-use Getopt::Long;
+use Cwd qw(getcwd);
+use File::Basename qw(basename);
+use File::Copy ();
+use File::Spec::Functions qw(abs2rel catfile catdir rel2abs);
+use FindBin qw($RealDir);
+use Getopt::Long qw(GetOptions);
+use POSIX qw(getgid getuid);
+use lib $RealDir;
+use make::common;
use make::configure;
-use make::utilities;
-
-our ($opt_use_gnutls, $opt_use_openssl, $opt_nointeractive, $opt_socketengine,
- $opt_system, $opt_uid, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir,
- $opt_data_dir, $opt_log_dir);
+use make::console;
+use make::directive;
+
+my ($opt_binary_dir,
+ $opt_config_dir,
+ $opt_data_dir,
+ $opt_development,
+ $opt_disable_auto_extras,
+ $opt_disable_interactive,
+ $opt_distribution_label,
+ $opt_example_dir,
+ $opt_gid,
+ $opt_log_dir,
+ $opt_manual_dir,
+ $opt_module_dir,
+ $opt_portable,
+ $opt_prefix,
+ $opt_runtime_dir,
+ $opt_script_dir,
+ $opt_socketengine,
+ $opt_system,
+ $opt_uid);
sub list_extras ();
my @opt_enableextras;
my @opt_disableextras;
-GetOptions (
- 'enable-gnutls' => \$opt_use_gnutls,
- 'system' => \$opt_system,
- 'uid=s' => \$opt_uid,
- 'enable-openssl' => \$opt_use_openssl,
- 'disable-interactive' => \$opt_nointeractive,
- 'socketengine=s' => \$opt_socketengine,
- 'prefix=s' => \$opt_base_dir,
- 'config-dir=s' => \$opt_config_dir,
- 'module-dir=s' => \$opt_module_dir,
- 'binary-dir=s' => \$opt_binary_dir,
- 'data-dir=s' => \$opt_data_dir,
- 'log-dir=s' => \$opt_log_dir,
- 'help' => \&cmd_help,
+exit 1 unless GetOptions(
+ 'clean' => \&cmd_clean,
+ 'help' => \&cmd_help,
'update' => \&cmd_update,
- 'clean' => \&cmd_clean,
- 'list-extras' => sub { list_extras; exit 0; }, # This, --enable-extras, and --disable-extras are for non-interactive managing.
- 'enable-extras=s@' => \@opt_enableextras, # ^
- 'disable-extras=s@' => \@opt_disableextras, # ^
+
+ 'binary-dir=s' => \$opt_binary_dir,
+ 'config-dir=s' => \$opt_config_dir,
+ 'data-dir=s' => \$opt_data_dir,
+ 'development' => \$opt_development,
+ 'disable-auto-extras' => \$opt_disable_auto_extras,
+ 'disable-interactive' => \$opt_disable_interactive,
+ 'distribution-label=s' => \$opt_distribution_label,
+ 'example-dir=s' => \$opt_example_dir,
+ 'gid=s' => \$opt_gid,
+ 'log-dir=s' => \$opt_log_dir,
+ 'manual-dir=s' => \$opt_manual_dir,
+ 'module-dir=s' => \$opt_module_dir,
+ 'portable' => \$opt_portable,
+ 'prefix=s' => \$opt_prefix,
+ 'runtime-dir=s' => \$opt_runtime_dir,
+ 'script-dir=s' => \$opt_script_dir,
+ 'socketengine=s' => \$opt_socketengine,
+ 'system' => \$opt_system,
+ 'uid=s' => \$opt_uid,
+
+ 'disable-extras=s@' => \@opt_disableextras,
+ 'enable-extras=s@' => \@opt_enableextras,
+ 'list-extras' => sub { list_extras; exit 0; },
);
if (scalar(@opt_enableextras) + scalar(@opt_disableextras) > 0) {
- @opt_enableextras = split /,/, join(',', @opt_enableextras);
- @opt_disableextras = split /,/, join(',', @opt_disableextras);
+ @opt_enableextras = grep { /\S/ } split /[, ]+/, join(',', @opt_enableextras);
+ @opt_disableextras = grep { /\S/ } split /[, ]+/, join(',', @opt_disableextras);
enable_extras(@opt_enableextras);
disable_extras(@opt_disableextras);
list_extras;
}
our $interactive = !(
- (defined $opt_base_dir) ||
- (defined $opt_config_dir) ||
- (defined $opt_module_dir) ||
- (defined $opt_base_dir) ||
- (defined $opt_binary_dir) ||
- (defined $opt_data_dir) ||
- (defined $opt_log_dir) ||
- (defined $opt_nointeractive) ||
- (defined $opt_socketengine) ||
- (defined $opt_use_openssl) ||
- (defined $opt_system) ||
- (defined $opt_uid) ||
- (defined $opt_use_gnutls)
+ !-t STDIN ||
+ !-t STDOUT ||
+ defined $opt_binary_dir ||
+ defined $opt_config_dir ||
+ defined $opt_data_dir ||
+ defined $opt_development ||
+ defined $opt_disable_auto_extras ||
+ defined $opt_disable_interactive ||
+ defined $opt_distribution_label ||
+ defined $opt_example_dir ||
+ defined $opt_gid ||
+ defined $opt_log_dir ||
+ defined $opt_manual_dir ||
+ defined $opt_module_dir ||
+ defined $opt_portable ||
+ defined $opt_prefix ||
+ defined $opt_runtime_dir ||
+ defined $opt_script_dir ||
+ defined $opt_socketengine ||
+ defined $opt_system ||
+ defined $opt_uid
);
-our $topdir = getcwd();
-our %config = read_configure_cache();
-
-print "Checking for cache from previous configure... ";
-print %config ? "found\n" : "not found\n";
-
-$config{BASE_DIR} = $topdir."/run";
-
-if (defined $opt_base_dir) {
- $config{BASE_DIR} = $opt_base_dir;
-} elsif (defined $opt_system) {
- $config{BASE_DIR} = '/var/lib/inspircd';
-}
-
-if (defined $opt_system) {
- $config{UID} = defined $opt_uid ? $opt_uid : 'ircd';
- $config{CONFIG_DIR} = '/etc/inspircd';
- $config{MODULE_DIR} = '/usr/lib/inspircd';
- $config{BINARY_DIR} = '/usr/sbin/';
- $config{BUILD_DIR} = $topdir."/build";
- $config{DATA_DIR} = '/var/inspircd';
- $config{LOG_DIR} = '/var/log/inspircd';
-} else {
- $config{UID} = defined $opt_uid ? $opt_uid : $<;
- $config{CONFIG_DIR} = rel2abs($config{BASE_DIR}."/conf");
- $config{MODULE_DIR} = rel2abs($config{BASE_DIR}."/modules");
- $config{BINARY_DIR} = rel2abs($config{BASE_DIR}."/bin");
- $config{BUILD_DIR} = rel2abs($topdir."/build");
- $config{DATA_DIR} = rel2abs($config{BASE_DIR}."/data");
- $config{LOG_DIR} = rel2abs($config{BASE_DIR}."/logs");
+my %version = get_version $opt_distribution_label;
+say console_format "<|BOLD Configuring InspIRCd $version{FULL} on $^O.|>";
+
+my %config;
+if ($interactive) {
+ %config = read_config_file(CONFIGURE_CACHE_FILE);
+ run_test abs2rel(CONFIGURE_CACHE_FILE, $RealDir), %config;
+ if (!defined $config{VERSION}) {
+ $config{VERSION} = CONFIGURE_CACHE_VERSION;
+ } elsif ($config{VERSION} != CONFIGURE_CACHE_VERSION) {
+ print_warning "ignoring contents of ${\CONFIGURE_CACHE_FILE} as it was generated by an incompatible version of $0!";
+ %config = ('VERSION', CONFIGURE_CACHE_VERSION);
+ }
}
-if (defined $opt_config_dir) {
- $config{CONFIG_DIR} = $opt_config_dir;
-}
-if (defined $opt_module_dir) {
- $config{MODULE_DIR} = $opt_module_dir;
-}
-if (defined $opt_binary_dir) {
- $config{BINARY_DIR} = $opt_binary_dir;
-}
-if (defined $opt_data_dir) {
- $config{DATA_DIR} = $opt_data_dir;
-}
-if (defined $opt_log_dir) {
- $config{LOG_DIR} = $opt_log_dir;
-}
-chomp($config{HAS_GNUTLS} = `pkg-config --modversion gnutls 2>/dev/null`);
-chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`);
-
-chomp(our $gnutls_ver = $config{HAS_GNUTLS});
-chomp(our $openssl_ver = $config{HAS_OPENSSL});
-$config{USE_GNUTLS} = 0;
-if (defined $opt_use_gnutls)
-{
- $config{USE_GNUTLS} = "y"; # Use gnutls.
-}
-$config{USE_OPENSSL} = 0; # Use openssl.
-if (defined $opt_use_openssl)
-{
- $config{USE_OPENSSL} = "y";
+$config{CXX} = find_compiler($config{CXX} // $ENV{CXX});
+unless ($config{CXX}) {
+ say 'A suitable C++ compiler could not be detected on your system!';
+ unless ($interactive) {
+ say 'Set the CXX environment variable to the path to a C++ compiler binary if this is incorrect.';
+ exit 1;
+ }
+ until ($config{CXX}) {
+ my $compiler_path = prompt_string 1, 'Please enter the path to a C++ compiler binary:', 'c++';
+ $config{CXX} = find_compiler $compiler_path;
+ }
}
+my %compiler = get_compiler_info($config{CXX});
-$config{STARTSCRIPT} = $^O eq 'darwin' ? 'org.inspircd.plist' : 'inspircd';
+$config{HAS_ARC4RANDOM_BUF} = run_test 'arc4random_buf()', test_file($config{CXX}, 'arc4random_buf.cpp');
+$config{HAS_CLOCK_GETTIME} = run_test 'clock_gettime()', test_file($config{CXX}, 'clock_gettime.cpp', $^O eq 'darwin' ? undef : '-lrt');
+$config{HAS_EVENTFD} = run_test 'eventfd()', test_file($config{CXX}, 'eventfd.cpp');
-$config{CXX} = defined $ENV{CXX} && !system("$ENV{CXX} -v > /dev/null 2>&1") ? $ENV{CXX} : find_compiler();
-if ($config{CXX} eq "") {
- print "A C++ compiler could not be detected on your system!\n";
- print "Set the CXX environment variable to the full path if this is incorrect.\n";
- exit 1;
-}
+my @socketengines;
+push @socketengines, 'epoll' if run_test 'epoll', test_header $config{CXX}, 'sys/epoll.h';
+push @socketengines, 'kqueue' if run_test 'kqueue', test_file $config{CXX}, 'kqueue.cpp';
+push @socketengines, 'poll' if run_test 'poll', test_header $config{CXX}, 'poll.h';
+push @socketengines, 'select';
-our %cxx = get_compiler_info($config{CXX});
-if ($cxx{UNSUPPORTED}) {
- print "Your C++ compiler is too old to build InspIRCd!\n";
- print "Reason: $cxx{REASON}\n";
- exit 1;
+if (defined $opt_socketengine) {
+ unless (grep { $_ eq $opt_socketengine } @socketengines) {
+ my $reason = -f "src/socketengines/socketengine_$opt_socketengine.cpp" ? 'is not available on this platform' : 'does not exist';
+ print_error "The socket engine you requested ($opt_socketengine) $reason!",
+ 'Available socket engines are:',
+ map { " * $_" } @socketengines;
+ }
}
-
-if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)(?:[a-z])?(?:\-[a-z][0-9])?/) {
- $config{HAS_OPENSSL} = $1;
+$config{SOCKETENGINE} = $opt_socketengine // $socketengines[0];
+
+if (defined $opt_portable) {
+ print_error '--portable and --system can not be used together!' if defined $opt_system;
+ $config{DESTDIR} = catfile $RealDir, 'run', '';
+ $config{BASE_DIR} = $opt_prefix // '';
+ $config{BINARY_DIR} = $opt_binary_dir // 'bin';
+ $config{CONFIG_DIR} = $opt_config_dir // 'conf';
+ $config{DATA_DIR} = $opt_data_dir // 'data';
+ $config{EXAMPLE_DIR} = $opt_example_dir // catdir $config{CONFIG_DIR}, 'examples';
+ $config{LOG_DIR} = $opt_log_dir // 'logs';
+ $config{MANUAL_DIR} = $opt_manual_dir // 'manuals';
+ $config{MODULE_DIR} = $opt_module_dir // 'modules';
+ $config{RUNTIME_DIR} = $opt_runtime_dir // $config{DATA_DIR};
+ $config{SCRIPT_DIR} = $opt_script_dir // $config{BASE_DIR};
+} elsif (defined $opt_system) {
+ $config{BASE_DIR} = $opt_prefix // '/';
+ $config{BINARY_DIR} = $opt_binary_dir // catdir $config{BASE_DIR}, 'usr/sbin';
+ $config{CONFIG_DIR} = $opt_config_dir // catdir $config{BASE_DIR}, 'etc/inspircd';
+ $config{DATA_DIR} = $opt_data_dir // catdir $config{BASE_DIR}, 'var/lib/inspircd';
+ $config{EXAMPLE_DIR} = $opt_example_dir // catdir $config{BASE_DIR}, 'usr/share/doc/inspircd';
+ $config{LOG_DIR} = $opt_log_dir // catdir $config{BASE_DIR}, 'var/log/inspircd';
+ $config{MANUAL_DIR} = $opt_manual_dir // catdir $config{BASE_DIR}, 'usr/share/man/man1';
+ $config{MODULE_DIR} = $opt_module_dir // catdir $config{BASE_DIR}, 'usr/lib/inspircd';
+ $config{RUNTIME_DIR} = $opt_runtime_dir // catdir $config{BASE_DIR}, 'var/run/inspircd';
+ $config{SCRIPT_DIR} = $opt_script_dir // catdir $config{BASE_DIR}, 'usr/share/inspircd';
} else {
- $config{HAS_OPENSSL} = "";
+ $config{BASE_DIR} = rel2abs $opt_prefix // $config{BASE_DIR} // catdir $RealDir, 'run';
+ $config{BINARY_DIR} = $opt_binary_dir // $config{BINARY_DIR} // catdir $config{BASE_DIR}, 'bin';
+ $config{CONFIG_DIR} = $opt_config_dir // $config{CONFIG_DIR} // catdir $config{BASE_DIR}, 'conf';
+ $config{DATA_DIR} = $opt_data_dir // $config{DATA_DIR} // catdir $config{BASE_DIR}, 'data';
+ $config{EXAMPLE_DIR} = $opt_example_dir // $config{EXAMPLE_DIR} // catdir $config{CONFIG_DIR}, 'examples';
+ $config{LOG_DIR} = $opt_log_dir // $config{LOG_DIR} // catdir $config{BASE_DIR}, 'logs';
+ $config{MANUAL_DIR} = $opt_manual_dir // $config{MANUAL_DIR} // catdir $config{BASE_DIR}, 'manuals';
+ $config{MODULE_DIR} = $opt_module_dir // $config{MODULE_DIR} // catdir $config{BASE_DIR}, 'modules';
+ $config{RUNTIME_DIR} = $opt_runtime_dir // $config{RUNTIME_DIR} // $config{DATA_DIR};
+ $config{SCRIPT_DIR} = $opt_script_dir // $config{SCRIPT_DIR} // $config{BASE_DIR};
}
-$config{HAS_CLOCK_GETTIME} = run_test 'clock_gettime()', test_file($config{CXX}, 'clock_gettime.cpp', '-lrt');
-$config{HAS_EVENTFD} = run_test 'eventfd()', test_file($config{CXX}, 'eventfd.cpp');
-
-if ($config{HAS_EPOLL} = run_test 'epoll', test_header($config{CXX}, 'sys/epoll.h')) {
- $config{SOCKETENGINE} ||= 'epoll';
-}
-
-if ($config{HAS_KQUEUE} = run_test 'kqueue', test_file($config{CXX}, 'kqueue.cpp')) {
- $config{SOCKETENGINE} ||= 'kqueue';
+# Parse --gid=123 or --gid=foo and extract the group id.
+my @group;
+if (defined $opt_gid) {
+ @group = $opt_gid =~ /^\d+$/ ? getgrgid($opt_gid) : getgrnam($opt_gid);
+ print_error "there is no '$opt_gid' group on this system!" unless @group;
+} else {
+ @group = $opt_system ? getgrnam('irc') : getgrgid($config{GID} // getgid());
+ print_error "you need to specify a group to run as using '--gid [id|name]'!" unless @group;
+ unless ($group[2]) {
+ print_warning <<"EOW";
+You are building as the privileged $group[0] group and have not specified
+an unprivileged group to run InspIRCd as.
+
+This is almost never what you should do. You should probably either create a new
+unprivileged user/group to build and run as or pass the '--gid [id|name]' flag
+to specify an unprivileged group to run as.
+EOW
+ if (!prompt_bool $interactive, "Are you sure you want to build as the $group[0] group?", 0) {
+ # PACKAGERS: You do not need to delete this check. Use `--gid $(id -g)` or `--gid 0` instead.
+ say STDERR "If you are sure you want to build as the $group[0] group pass the --gid $group[2] flag." unless $interactive;
+ exit 1;
+ }
+ }
}
-
-if ($config{HAS_PORTS} = run_test 'Solaris IOCP', test_header($config{CXX}, 'port.h')) {
- $config{SOCKETENGINE} ||= 'ports';
+$config{GROUP} = $group[0];
+$config{GID} = $group[2];
+
+# Parse --uid=123 or --uid=foo and extract the user id.
+my @user;
+if (defined $opt_uid) {
+ @user = $opt_uid =~ /^\d+$/ ? getpwuid($opt_uid) : getpwnam($opt_uid);
+ print_error "there is no '$opt_uid' user on this system!" unless @user;
+} else {
+ @user = $opt_system ? getpwnam('irc') : getpwuid($config{UID} // getuid());
+ print_error "you need to specify a user to run as using '--uid [id|name]'!" unless @user;
+ unless ($user[2]) {
+ print_warning <<"EOW";
+You are building as the privileged $user[0] user and have not specified
+an unprivileged user to run InspIRCd as.
+
+This is almost never what you should do. You should probably either create a new
+unprivileged user/group to build and run as or pass the '--uid [id|name]' flag
+to specify an unprivileged user to run as.
+EOW
+ if (!prompt_bool $interactive, "Are you sure you want to build as the $user[0] user?", 0) {
+ # PACKAGERS: You do not need to delete this check. Use `--uid $(id -u)` or `--uid 0` instead.
+ say STDERR "If you are sure you want to build as the $user[0] user pass the --uid $user[2] flag." unless $interactive;
+ exit 1;
+ }
+ }
}
-
-if ($config{HAS_POLL} = run_test 'poll', test_header($config{CXX}, 'poll.h')) {
- $config{SOCKETENGINE} ||= 'poll';
+$config{USER} = $user[0];
+$config{UID} = $user[2];
+
+# Warn the user about clock drifting when running on OpenVZ.
+if (-e '/proc/user_beancounters' || -e '/proc/vz/vzaquota') {
+ print_warning <<'EOW';
+You are building InspIRCd inside of an OpenVZ container. If you
+plan to use InspIRCd in this container then you should make sure that NTP is
+configured on the Hardware Node. Failure to do so may result in clock drifting!
+EOW
}
-# Select is available on all platforms
-$config{HAS_SELECT} = 1;
-$config{SOCKETENGINE} ||= "select";
-
-if (defined $opt_socketengine) {
- my $cfgkey = "HAS_" . uc $opt_socketengine;
- if ($config{$cfgkey} && -f "src/socketengines/socketengine_$opt_socketengine.cpp") {
- $config{SOCKETENGINE} = $opt_socketengine;
- } else {
- print "Unable to use a socket engine which is not supported on this platform ($opt_socketengine)!\n";
- print "Available socket engines are:";
- foreach (<src/socketengines/socketengine_*.cpp>) {
- s/src\/socketengines\/socketengine_(\w+)\.cpp/$1/;
- print " $1" if $config{"HAS_" . uc $1};
- }
- print "\n";
- exit 1;
- }
+# Warn the user about OpenBSD shipping incredibly broken compilers/linkers.
+if ($^O eq 'openbsd') {
+ print_warning <<'EOW';
+You are building InspIRCd on OpenBSD. The C++ compilers and linkers
+that OpenBSD ship are incredibly broken. You may have strange linker errors
+and crashes. Please consider using a different OS like FreeBSD/NetBSD instead.
+EOW
}
-print "Checking for libgnutls... ";
-if (defined($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS}) || ($config{HAS_GNUTLS} eq "y"))) {
- if (defined($gnutls_ver) && ($gnutls_ver ne "")) {
- print "yes\n";
- $config{HAS_GNUTLS} = "y";
- } else {
- print "no\n";
- $config{HAS_GNUTLS} = "n";
- }
-} else {
- print "no\n";
- $config{HAS_GNUTLS} = "n";
+# Warn about Perl versions that will not be supported in the future.
+if ($^V lt 'v5.26.0') {
+ print_warning <<"EOW";
+You are building InspIRCd with Perl $^V. This is very old and will
+not be supported by the next major version of InspIRCd. Please consider updating
+to Perl v5.26 or newer.
+EOW
}
-print "Checking for openssl... ";
-if (defined($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL}) || ($config{HAS_OPENSSL} eq "y"))) {
- if (defined($openssl_ver) && ($openssl_ver ne "")) {
- print "yes\n";
- $config{HAS_OPENSSL} = "y";
- } else {
- print "no\n";
- $config{HAS_OPENSSL} = "n";
- }
-} else {
- print "no\n";
- $config{HAS_OPENSSL} = "n";
+# Warn about compiler versions that will not be supported in the future.
+my %future_compilers = (
+ AppleClang => version->parse('10.0'),
+ Clang => version->parse('5.0'),
+ GCC => version->parse('7.0'),
+);
+if (exists $future_compilers{$compiler{NAME}} && $compiler{VERSION} lt $future_compilers{$compiler{NAME}}) {
+ print_warning <<"EOW";
+You are building InspIRCd with $compiler{NAME} v$compiler{VERSION}. This is very old and
+will not be supported by the next major version of InspIRCd. Please consider
+updating to $compiler{NAME} v$future_compilers{$compiler{NAME}} or newer.
+EOW
}
-if ($interactive)
-{
- # Clear the screen.
- system 'tput', 'clear';
-
- my $revision = get_revision();
- chomp(my $version = `sh src/version.sh`);
-
- # Display Introduction Message..
- print <<"STOP" ;
-Welcome to the \e[1mInspIRCd\e[0m Configuration program! (\e[1minteractive mode\e[0m)
-\e[1mPackage maintainers: Type ./configure --help for non-interactive help\e[0m
-
-*** If you are unsure of any of these values, leave it blank for ***
-*** standard settings that will work, and your server will run ***
-*** using them. Please consult your IRC network admin if in doubt. ***
-
-Press \e[1m<RETURN>\e[0m to accept the default for any option, or enter
-a new value. Please note: You will \e[1mHAVE\e[0m to read the docs
-dir, otherwise you won't have a config file!
-
-Your operating system is: \e[1;32m$^O\e[0m
-STOP
- print "Your InspIRCd version is: \e[1;32m";
- print $revision eq 'release' ? substr($version, 9) : substr($revision, 1);
- print "\e[0m\n\n";
- print "The following compiler has been detected: \e[1;32m$cxx{NAME} $cxx{VERSION}\e[0m ($config{CXX})\n\n";
-
- # Check that the user actually wants this version.
- if (index($version, '+') != -1) {
- print <<"EOW" ;
-\e[1;31mWARNING!\e[0m You are building a development version. This contains code which has
+# Check that the user actually wants this version.
+if (defined $version{REAL_LABEL}) {
+ print_warning <<'EOW';
+You are building a development version. This contains code which has
not been tested as heavily and may contain various faults which could seriously
affect the running of your server. It is recommended that you use a stable
version instead.
-You can obtain the latest stable version from https://github.com/inspircd/inspircd/releases
-or by running `git checkout insp20` if you are installing from Git.
-
+You can obtain the latest stable version from https://www.inspircd.org or by
+running `<|GREEN git checkout $(git describe --abbrev=0 --tags insp3)|>` if you are
+installing from Git.
EOW
- exit 1 unless prompt_bool(1, 'I understand this warning and want to continue anyway.', 0);
+ if (!prompt_bool $interactive, 'I understand this warning and want to continue anyway.', $opt_development // 0) {
+ say STDERR 'If you understand this warning and still want to continue pass the --development flag.' unless $interactive;
+ exit 1;
}
+}
- # Directory Settings..
- my $tmpbase = $config{BASE_DIR};
- $config{BASE_DIR} = prompt_dir(1, 'What directory do you wish to install the InspIRCd base?', $config{BASE_DIR});
- if ($tmpbase ne $config{BASE_DIR}) {
- $config{CONFIG_DIR} = rel2abs($config{BASE_DIR}."/conf");
- $config{MODULE_DIR} = rel2abs($config{BASE_DIR}."/modules");
- $config{DATA_DIR} = rel2abs($config{BASE_DIR}."/data");
- $config{LOG_DIR} = rel2abs($config{BASE_DIR}."/logs");
- $config{BINARY_DIR} = rel2abs($config{BASE_DIR}."/bin");
+# Configure directory settings.
+my $question = <<"EOQ";
+Currently, InspIRCd is configured with the following paths:
+
+<|BOLD Binary:|> $config{BINARY_DIR}
+<|BOLD Config:|> $config{CONFIG_DIR}
+<|BOLD Data:|> $config{DATA_DIR}
+<|BOLD Log:|> $config{LOG_DIR}
+<|BOLD Manual:|> $config{MANUAL_DIR}
+<|BOLD Module:|> $config{MODULE_DIR}
+<|BOLD Script:|> $config{SCRIPT_DIR}
+
+Do you want to change these settings?
+EOQ
+if (prompt_bool $interactive, $question, 0) {
+ my $original_base_dir = $config{BASE_DIR};
+ $config{BASE_DIR} = prompt_dir $interactive, 'In what directory do you wish to install the InspIRCd base?', $config{BASE_DIR};
+ for my $key (qw(BINARY_DIR CONFIG_DIR DATA_DIR LOG_DIR MANUAL_DIR MODULE_DIR SCRIPT_DIR)) {
+ $config{$key} =~ s/^\Q$original_base_dir\E/$config{BASE_DIR}/;
}
+ $config{BINARY_DIR} = prompt_dir $interactive, 'In what directory should the InspIRCd binary be placed?', $config{BINARY_DIR};
+ $config{CONFIG_DIR} = prompt_dir $interactive, 'In what directory are configuration files to be stored?', $config{CONFIG_DIR};
+ $config{DATA_DIR} = prompt_dir $interactive, 'In what directory are variable data files to be stored?', $config{DATA_DIR};
+ $config{LOG_DIR} = prompt_dir $interactive, 'In what directory are log files to be stored?', $config{LOG_DIR};
+ $config{MANUAL_DIR} = prompt_dir $interactive, 'In what directory are manual pages to be placed?', $config{MANUAL_DIR};
+ $config{MODULE_DIR} = prompt_dir $interactive, 'In what directory are modules to be placed?', $config{MODULE_DIR};
+ $config{SCRIPT_DIR} = prompt_dir $interactive, 'In what directory are scripts to be placed?', $config{SCRIPT_DIR};
+ $config{EXAMPLE_DIR} = $config{CONFIG_DIR} . '/examples';
+ $config{RUNTIME_DIR} = $config{DATA_DIR};
+}
- $config{BINARY_DIR} = prompt_dir(1, 'In what directory should the InspIRCd binary be placed?', $config{BINARY_DIR});
- $config{CONFIG_DIR} = prompt_dir(1, 'In what directory are the configuration files to be stored?', $config{CONFIG_DIR});
- $config{DATA_DIR} = prompt_dir(1, 'In what directory are variable data files to be stored?', $config{DATA_DIR});
- $config{LOG_DIR} = prompt_dir(1, 'In what directory are log files to be stored?', $config{LOG_DIR});
- $config{MODULE_DIR} = prompt_dir(1, 'In what directory are the modules to be placed?', $config{MODULE_DIR});
- $config{BUILD_DIR} = prompt_dir(1, 'In what directory do you want the build to take place?', $config{BUILD_DIR});
-
- my $chose_hiperf = 0;
- if ($config{HAS_KQUEUE}) {
- $config{USE_KQUEUE} = prompt_bool(1, 'Your operating system has support for the high performance kqueue socket engine. Would you like to enable it?', 1);
- if ($config{USE_KQUEUE}) {
- $config{SOCKETENGINE} = "kqueue";
- $chose_hiperf = 1;
+# Configure module settings.
+$question = <<'EOQ';
+Currently, InspIRCd is configured to automatically enable all available extra modules.
+
+Would you like to enable extra modules manually?
+EOQ
+if (prompt_bool $interactive, $question, 0) {
+ for my $extra (<$RealDir/src/modules/extra/m_*.cpp>) {
+ my $module_name = module_shrink $extra;
+ if (prompt_bool $interactive, "Would you like to enable the <|BOLD $module_name|> module?", 0) {
+ enable_extras $module_name;
}
}
- if ($config{HAS_EPOLL}) {
- $config{USE_EPOLL} = prompt_bool(1, 'Your operating system has support for the high performance epoll socket engine. Would you like to enable it?', 1);
- if ($config{USE_EPOLL}) {
- $config{SOCKETENGINE} = "epoll";
- $chose_hiperf = 1;
- }
- }
- if ($config{HAS_PORTS}) {
- $config{USE_PORTS} = prompt_bool(1, 'Your operating system has support for the high performance IOCP socket engine. Would you like to enable it?', 1);
- if ($config{USE_PORTS}) {
- $config{SOCKETENGINE} = "ports";
- $chose_hiperf = 1;
+} elsif (!defined $opt_disable_auto_extras) {
+ my %modules = (
+ 'm_argon2.cpp' => 'pkg-config --exists libargon2',
+ 'm_geo_maxmind.cpp' => 'pkg-config --exists libmaxminddb',
+ 'm_mysql.cpp' => 'mysql_config --version',
+ 'm_pgsql.cpp' => 'pg_config --version',
+ 'm_ldap.cpp' => "echo '#include <ldap.h>' | $config{CXX} -E -",
+ 'm_regex_pcre.cpp' => 'pcre-config --version',
+ 'm_regex_posix.cpp' => undef,
+ 'm_regex_re2.cpp' => 'pkg-config --exists re2',
+ 'm_regex_stdlib.cpp' => "$config{CXX} -o /dev/null -std=c++11 $RealDir/make/test/compiler.cpp",
+ 'm_regex_tre.cpp' => 'pkg-config --exists tre',
+ 'm_sqlite3.cpp' => 'pkg-config --exists sqlite3',
+ 'm_ssl_gnutls.cpp' => 'pkg-config --exists gnutls',
+ 'm_ssl_mbedtls.cpp' => "echo '#include <mbedtls/version.h>' | $config{CXX} -E -",
+ 'm_ssl_openssl.cpp' => 'pkg-config --exists openssl',
+ 'm_sslrehashsignal.cpp' => undef,
+ );
+ while (my ($module, $command) = each %modules) {
+ unless (defined $command && system "$command 1>/dev/null 2>/dev/null") {
+ enable_extras $module;
}
}
+}
- if (!$chose_hiperf && $config{HAS_POLL}) {
- $config{USE_POLL} = prompt_bool(1, 'Your operating system has support for the mid performance poll socket engine. Would you like to enable it?', 1);
- if ($config{USE_POLL}) {
- $config{SOCKETENGINE} = "poll";
- }
- }
- unless ($chose_hiperf || $config{USE_POLL})
- {
- print "No high-performance socket engines are available, or you chose not to enable one. Defaulting to select() engine.\n\n";
- $config{SOCKETENGINE} = "select";
- }
+# Generate SSL certificates.
+$question = <<EOQ;
+Would you like to generate a self-signed SSL certificate now? This certificate
+can be used for testing but <|BOLD should not|> be used on a production network.
- if ($config{HAS_GNUTLS} eq "y" || $config{HAS_OPENSSL} eq "y")
- {
- print "Detected GnuTLS version: \e[1;32m" . $gnutls_ver . "\e[0m\n";
- print "Detected OpenSSL version: \e[1;32m" . $openssl_ver . "\e[0m\n\n";
-
- $config{USE_SSL} = prompt_bool(1, 'One or more SSL libraries detected. Would you like to enable SSL support?', 1);
- if ($config{USE_SSL})
- {
- if ($config{HAS_GNUTLS} eq "y")
- {
- $config{USE_GNUTLS} = prompt_bool(1, 'Would you like to enable SSL with m_ssl_gnutls (recommended)?', 1);
- if ($config{USE_GNUTLS})
- {
- print "Using GnuTLS SSL module.\n\n";
- unlink 'src/modules/m_ssl_gnutls.cpp' if -f 'src/modules/m_ssl_gnutls.cpp';
- symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!\n";
- }
- }
+Note: you can get a <|BOLD free|> CA-signed certificate from Let's Encrypt. See
+https://letsencrypt.org/getting-started/ for more details.
+EOQ
- if ($config{HAS_OPENSSL} eq "y")
- {
- $config{USE_OPENSSL} = prompt_bool(1, 'Would you like to enable SSL with m_ssl_openssl (recommended)?', 1);
- if ($config{USE_OPENSSL})
- {
- print "Using OpenSSL SSL module.\n\n";
- unlink 'src/modules/m_ssl_openssl.cpp' if -f 'src/modules/m_ssl_openssl.cpp';
- symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!\n";
- }
- }
+if (<$RealDir/src/modules/m_ssl_*.cpp>) {
+ if (prompt_bool $interactive, $question, $interactive) {
+ create_directory CONFIGURE_DIRECTORY, 0750 or print_error "unable to create ${\CONFIGURE_DIRECTORY}: $!";
+ system './tools/genssl', 'auto', CONFIGURE_DIRECTORY;
+ } else {
+ my @pems = <${\CONFIGURE_DIRECTORY}/{cert,csr,dhparams,key}.pem>;
+ $question = <<EOQ;
+The following self-signed files were previously generated and will be installed
+when you run Make. Do you want to delete them?
+
+ * ${\join "\n * ", @pems}
+EOQ
+ if (@pems && prompt_bool $interactive, $question, 0) {
+ unlink @pems;
}
}
- else
- {
- print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed and\n";
- print "is in your path.\n\n";
- }
+} elsif (!defined $opt_disable_auto_extras) {
+ print_warning <<"EOM";
+You are building without enabling any SSL modules. This is not
+recommended as SSL greatly enhances the security and privacy of your IRC server
+and in a future version will be <|BOLD required|> for linking servers.
+
+Please read the following documentation pages on how to enable SSL support:
+
+GnuTLS (recommended): https://docs.inspircd.org/3/modules/ssl_gnutls
+mbedTLS: https://docs.inspircd.org/3/modules/ssl_mbedtls
+OpenSSL: https://docs.inspircd.org/3/modules/ssl_openssl
+EOM
}
-# We are on a POSIX system, we can enable POSIX extras without asking
-symlink "extra/m_regex_posix.cpp", "src/modules/m_regex_posix.cpp";
+# Cache the distribution label so that its not lost when --update is run.
+$config{DISTRIBUTION} = $opt_distribution_label if $opt_distribution_label;
-if (($config{USE_GNUTLS}) && ($config{HAS_GNUTLS} ne "y"))
-{
- print "Sorry, but i couldn't detect gnutls. Make sure pkg-config is in your path.\n";
- exit 1;
-}
-if (($config{USE_OPENSSL}) && ($config{HAS_OPENSSL} ne "y"))
-{
- print "Sorry, but i couldn't detect openssl. Make sure pkg-config is in your path.\n";
- exit 1;
-}
+write_configure_cache %config;
+parse_templates \%config, \%compiler, \%version;
-if ($config{USE_GNUTLS} || $config{USE_OPENSSL}) {
- if (my $val = prompt_bool($interactive, 'Would you like to generate SSL certificates now?', $interactive)) {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem" && -r "$config{CONFIG_DIR}/dhparams.pem") {
- unless (system './tools/genssl auto') {
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
- print "Done.\n\n";
- }
- } else {
- print "SSL Certificates found, skipping.\n\n"
- }
- } else {
- print "Skipping SSL certificate generation in non-interactive mode.\n\n";
- }
-} else {
- print "Skipping SSL Certificate generation, SSL support is not available.\n\n";
-}
+print console_format <<"EOM";
-print "Writing \e[1;32m.config.cache\e[0m ...\n";
-write_configure_cache(%config);
-writefiles();
-dump_hash();
-
-print "\n";
-print "To build your server with these settings, please run '\e[1;32mmake\e[0m' now.\n";
-if ($config{USE_GNUTLS} || $config{USE_OPENSSL}) {
- print "Please note: for \e[1;32mSSL support\e[0m you will need to load required\n";
- print "modules in your config. This configure script has added those modules to the\n";
- print "build process. For more info please refer to:\n";
- print "\e[1;32mhttp://wiki.inspircd.org/Installation_From_Tarball\e[0m\n";
-}
-print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n";
-
-sub writefiles {
- chomp(my $incos = `uname -n -s -r`);
- chomp(my $version = `sh src/version.sh`);
- my $revision = get_revision();
- my $branch = "InspIRCd-0.0";
- if ($version =~ /^(InspIRCd-[0-9]+\.[0-9]+)\.[0-9]+/)
- {
- $branch = $1;
- }
- print "Writing \e[1;32mconfig.h\e[0m\n";
- open(FILEHANDLE, ">include/config.h.tmp");
- print FILEHANDLE <<EOF;
-/* Auto generated by configure, do not modify! */
-#pragma once
-
-#define BRANCH "$branch"
-#define VERSION "$version"
-#define REVISION "$revision"
-#define SYSTEM "$incos"
-
-#define CONFIG_PATH "$config{CONFIG_DIR}"
-#define DATA_PATH "$config{DATA_DIR}"
-#define LOG_PATH "$config{LOG_DIR}"
-#define MOD_PATH "$config{MODULE_DIR}"
-
-EOF
-
- if ($config{HAS_EVENTFD}) {
- print FILEHANDLE "#define HAS_EVENTFD\n";
- }
- if ($config{HAS_CLOCK_GETTIME}) {
- print FILEHANDLE "#define HAS_CLOCK_GETTIME\n";
- }
+Configuration is complete! You have chosen to build with the following settings:
- print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n";
- close(FILEHANDLE);
+<|GREEN Compiler:|>
+ <|GREEN Binary:|> $config{CXX}
+ <|GREEN Name:|> $compiler{NAME}
+ <|GREEN Version:|> $compiler{VERSION}
- unlink 'include/config.h';
- rename 'include/config.h.tmp', 'include/config.h';
+<|GREEN Extra Modules:|>
+EOM
- # Do this once here, and cache it in the .*.inc files,
- # rather than attempting to read src/version.sh from
- # compiled code -- we might not have the source to hand.
+for my $file (<$RealDir/src/modules/m_*>) {
+ say " * ${\module_shrink $file}" if -l $file;
+}
- my @dotfiles = qw(main.mk inspircd);
- push @dotfiles, 'org.inspircd.plist' if $^O eq 'darwin';
+my @makeargs;
+push @makeargs, "-C${\abs2rel $RealDir}" unless getcwd eq $RealDir;
+push @makeargs, "-j${\(get_cpu_count() + 1)}";
- foreach my $file (@dotfiles) {
- open(FILEHANDLE, "make/template/$file") or die "Can't open make/template/$file: $!";
- $_ = join '', <FILEHANDLE>;
- close(FILEHANDLE);
+print console_format <<"EOM";
- $config{BUILD_DIR} ||= rel2abs($topdir."/build");
- $config{COMPILER} = lc $cxx{NAME};
- $config{SYSTEM} = lc $^O;
+<|GREEN Paths:|>
+ <|GREEN Binary:|> $config{BINARY_DIR}
+ <|GREEN Config:|> $config{CONFIG_DIR}
+ <|GREEN Data:|> $config{DATA_DIR}
+ <|GREEN Example:|> $config{EXAMPLE_DIR}
+ <|GREEN Log:|> $config{LOG_DIR}
+ <|GREEN Manual:|> $config{MANUAL_DIR}
+ <|GREEN Module:|> $config{MODULE_DIR}
+ <|GREEN Runtime:|> $config{RUNTIME_DIR}
+ <|GREEN Script:|> $config{SCRIPT_DIR}
- for my $var (qw(
- CXX COMPILER SYSTEM BASE_DIR CONFIG_DIR MODULE_DIR BINARY_DIR BUILD_DIR DATA_DIR UID
- STARTSCRIPT SOCKETENGINE
- )) {
- s/\@$var\@/$config{$var}/g;
- }
+<|GREEN Execution Group:|> $config{GROUP} ($config{GID})
+<|GREEN Execution User:|> $config{USER} ($config{UID})
+<|GREEN Socket Engine:|> $config{SOCKETENGINE}
- s/\@VERSION\@/$version/ if defined $version;
-
- if ($file eq 'main.mk') {
- print "Writing \e[1;32mGNUmakefile\e[0m ...\n";
-
- my $mk_tmp = $_;
- s/\@IFDEF (\S+)/ifdef $1/g;
- s/\@IFNDEF (\S+)/ifndef $1/g;
- s/\@IFEQ (\S+) (\S+)/ifeq ($1,$2)/g;
- s/\@IFNEQ (\S+) (\S+)/ifneq ($1,$2)/g;
- s/\@ELSIFEQ (\S+) (\S+)/else ifeq ($1,$2)/g;
- s/\@ELSE/else/g;
- s/\@ENDIF/endif/g;
- s/ *\@BSD_ONLY .*\n//g;
- s/\@GNU_ONLY //g;
- s/\@DO_EXPORT (.*)/export $1/g;
- open MKF, '>GNUmakefile' or die "Can't write to GNUmakefile: $!";
- print MKF $_;
- close MKF;
-
- print "Writing \e[1;32mBSDmakefile\e[0m ...\n";
- $_ = $mk_tmp;
- s/\@IFDEF (\S+)/.if defined($1)/g;
- s/\@IFNDEF (\S+)/.if !defined($1)/g;
- s/\@IFEQ (\S+) (\S+)/.if $1 == $2/g;
- s/\@IFNEQ (\S+) (\S+)/.if $1 != $2/g;
- s/\@ELSIFEQ (\S+) (\S+)/.elif $1 == $2/g;
- s/\@ELSE/.else/g;
- s/\@ENDIF/.endif/g;
- s/\@BSD_ONLY //g;
- s/ *\@GNU_ONLY .*\n//g;
- $mk_tmp = $_;
- $mk_tmp =~ s#\@DO_EXPORT (.*)#"MAKEENV += ".join ' ', map "$_='\${$_}'", split /\s/, $1#eg;
- open MKF, '>BSDmakefile' or die "Can't write to BSDmakefile: $!";
- print MKF $mk_tmp;
- close MKF;
- } else {
- print "Writing \e[1;32m$file\e[0m ...\n";
- open(FILEHANDLE, ">$file") or die("Can't write to $file: $!\n");
- print FILEHANDLE $_;
- close(FILEHANDLE);
- }
- }
+To build with these settings run '<|GREEN make ${\join ' ', @makeargs} install|>' now.
- chmod 0750, 'inspircd';
-}
+EOM
# Routine to list out the extra/ modules that have been enabled.
# Note: when getting any filenames out and comparing, it's important to lc it if the
my @sources = map { File::Spec->case_tolerant() ? lc($_) : $_ } (readdir($dd));
closedir $dd;
undef $dd;
- my $maxlen = (sort { $b <=> $a } (map {length($_)} (@extras)))[0];
+ my $maxlen = (sort { $b <=> $a } (map { length module_shrink $_ } (@extras)))[0];
my %extras = ();
EXTRA: for my $extra (@extras) {
next if (File::Spec->curdir() eq $extra || File::Spec->updir() eq $extra);
for my $extra (keys(%extras)) {
next unless $extras{$extra} =~ m/enabled/; # only process enabled extras.
my $abs_extra = File::Spec->catfile($abs_srcdir, "extra", $extra);
- my @deps = split /\s+/, get_property($abs_extra, 'ModDep');
+ my @deps = split /\s+/, get_directive($abs_extra, 'ModDep', '');
for my $dep (@deps) {
if (exists($extras{$dep})) {
my $ref = \$extras{$dep}; # Take reference.
for my $extra (sort {$a cmp $b} keys(%extras)) {
my $text = $extras{$extra};
if ($text =~ m/needed by/ && $text !~ m/enabled/) {
- printf "\e[31;1;5m%-*s = %s%s\e[0m\n", $maxlen, $extra, $text, ($text =~ m/needed by/ ? ")" : "");
+ printf "\e[31;1;5m%-*s = %s%s\e[0m\n", $maxlen, module_shrink($extra), $text, ($text =~ m/needed by/ ? ")" : "");
} else {
- printf "%-*s = %s%s\n", $maxlen, $extra, $text, ($text =~ m/needed by/ ? "\e[0m)" : "");
+ printf "%-*s = %s%s\n", $maxlen, module_shrink($extra), $text, ($text =~ m/needed by/ ? "\e[0m)" : "");
}
}
return keys(%extras) if wantarray; # Can be used by manage_extras.
}
-sub enable_extras (@) {
- my (@extras) = @_;
- for my $extra (@extras) {
- my $extrapath = "src/modules/extra/$extra";
- if (!-e $extrapath) {
- print STDERR "Cannot enable \e[32;1m$extra\e[0m : No such file or directory in src/modules/extra\n";
- next;
- }
- my $source = "src/modules/$extra";
- if (-e $source) {
- print STDERR "Cannot enable \e[32;1m$extra\e[0m : destination in src/modules exists (might already be enabled?)\n";
- next;
+sub enable_extras(@) {
+ my $moduledir = catdir $RealDir, 'src', 'modules';
+ my $extradir = catdir $moduledir, 'extra';
+
+ for my $extra (@_) {
+ my $shortname = module_shrink $extra;
+ my $extrafile = module_expand $extra;
+
+ my $extrapath = catfile $extradir, $extrafile;
+ if (!-f $extrapath) {
+ print_error "<|GREEN $extra|> is not an extra module!";
}
- # Get dependencies, and add them to be processed.
- my @deps = split /\s+/, get_property($extrapath, 'ModDep');
- for my $dep (@deps) {
- next if scalar(grep { $_ eq $dep } (@extras)) > 0; # Skip if we're going to be enabling it anyway.
- if (!-e "src/modules/$dep" && !-e "include/$dep") {
- if (-e "src/modules/extra/$dep") {
- print STDERR "Will also enable extra \e[32;1m$dep\e[0m (needed by \e[32;1m$extra\e[0m)\n";
- push @extras, $dep;
- } else {
- print STDERR "\e[33;1mWARNING:\e[0m module \e[32;1m$extra\e[0m might be missing dependency \e[32;1m$dep\e[0m - YOU are responsible for satisfying it!\n";
- }
+
+ my $modulepath = catfile $moduledir, $extrafile;
+ if (-l $modulepath) {
+ if (readlink($modulepath) ne $extrapath) {
+ unlink $modulepath; # Remove the dead symlink.
+ } else {
+ next; # Module is already enabled.
}
}
- print "Enabling $extra ... \n";
- symlink "extra/$extra", $source or print STDERR "$source: Cannot link to 'extra/$extra': $!\n";
+
+ if (-e $modulepath) {
+ print_error "unable to symlink <|GREEN ${\abs2rel $modulepath}|> to <|GREEN ${\abs2rel $extrapath}|>: the target exists and is not a symlink.";
+ } else {
+ say console_format "Enabling the <|GREEN $shortname|> module ...";
+ symlink $extrapath, $modulepath or print_error "unable to symlink <|GREEN ${\abs2rel $modulepath}|> to <|GREEN ${\abs2rel $extrapath}|>: $!";
+ }
}
}
-sub disable_extras (@)
-{
- opendir my $dd, "src/modules/extra/";
- my @files = readdir($dd);
- closedir $dd;
- my (@extras) = @_;
-EXTRA: for my $extra (@extras) {
- my $extrapath = "src/modules/extra/$extra";
- my $source = "src/modules/$extra";
- if (!-e $extrapath) {
- print STDERR "Cannot disable \e[32;1m$extra\e[0m : Is not an extra\n";
- next;
- }
- if ((! -l $source) || readlink($source) ne "extra/$extra") {
- print STDERR "Cannot disable \e[32;1m$extra\e[0m : Source is not a link or doesn't refer to the right file. Remove manually if this is in error.\n";
- next;
- }
- # Check if anything needs this.
- for my $file (@files) {
- my @deps = split /\s+/, get_property("src/modules/extra/$file", 'ModDep');
- # File depends on this extra...
- if (scalar(grep { $_ eq $extra } @deps) > 0) {
- # And is both enabled and not about to be disabled.
- if (-e "src/modules/$file" && scalar(grep { $_ eq $file } @extras) < 1) {
- print STDERR "Cannot disable \e[32;1m$extra\e[0m : is needed by \e[32;1m$file\e[0m\n";
- next EXTRA;
- }
- }
+sub disable_extras(@) {
+ my $moduledir = catdir $RealDir, 'src', 'modules';
+ my $extradir = catdir $moduledir, 'extra';
+
+ for my $extra (@_) {
+ my $shortname = module_shrink $extra;
+ my $extrafile = module_expand $extra;
+
+ my $modulepath = catfile $moduledir, $extrafile;
+ my $extrapath = catfile $extradir, $extrafile;
+ if (!-e $modulepath && !-e $extrapath) {
+ print_error "the <|GREEN $shortname|> module does not exist!";
+ } elsif (!-e $modulepath && -e $extrapath) {
+ print_error "the <|GREEN $shortname|> module is not currently enabled!";
+ } elsif ((-e $modulepath && !-e $extrapath) || !-l $modulepath) {
+ print_error "the <|GREEN $shortname|> module is not an extra module!";
+ } else {
+ say console_format "Disabling the <|GREEN $shortname|> module ...";
+ unlink $modulepath or print_error "unable to unlink <|GREEN $extrapath|>: $!";
}
- # Now remove.
- print "Disabling $extra ... \n";
- unlink "src/modules/$extra" or print STDERR "Cannot disable \e[32;1m$extra\e[0m : $!\n";
}
}
projects / user / henk / code / inspircd.git / blobdiff