###################################################
# InspIRCd Configuration Script
#
-# Copyright 2002-2007 The InspIRCd Development Team
+# Copyright 2002-2008 The InspIRCd Development Team
# http://www.inspircd.org/wiki/index.php/Credits
#
# Licensed under GPL, please see the COPYING file
# This is a list of all files in the core. Each cpp file is mapped to a shared object file,
# whos file extension is omitted (these can vary from system to system). Auto detected by
-# scanning the src/*.cpp files for files containing /* $Core: */ identifiers.
+# scanning the src/*.cpp files for files containing /* $Core */ identifiers.
our %filelist = ();
our %extrasources = ();
-our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_nick_length,
- $opt_chan_length, $opt_maxclients, $opt_ports, $opt_epoll, $opt_kqueue, $opt_noports,
- $opt_noepoll, $opt_nokqueue, $opt_disablerpath, $opt_ipv6, $opt_ipv6links,
- $opt_noipv6links, $opt_ident, $opt_quit, $opt_topic, $opt_maxbuf, $opt_kick,
- $opt_gecos, $opt_away, $opt_modes, $opt_disable_debug, $opt_maxchans,
- $opt_opermaxchans);
+our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_ports,
+ $opt_epoll, $opt_kqueue, $opt_noports, $opt_noepoll, $opt_nokqueue,
+ $opt_ipv6, $opt_ipv6links, $opt_noipv6links, $opt_maxbuf, $opt_disable_debug,
+ $opt_freebsd_port);
our ($opt_cc, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir,
$opt_library_dir);
'rebuild' => \$opt_rebuild,
'enable-openssl' => \$opt_use_openssl,
'disable-interactive' => \$opt_nointeractive,
- 'with-nick-length=i' => \$opt_nick_length,
- 'with-channel-length=i' => \$opt_chan_length,
- 'with-max-clients=i' => \$opt_maxclients,
'enable-ports' => \$opt_ports,
'enable-epoll' => \$opt_epoll,
'enable-kqueue' => \$opt_kqueue,
'disable-ports' => \$opt_noports,
'disable-epoll' => \$opt_noepoll,
'disable-kqueue' => \$opt_nokqueue,
- 'disable-rpath' => \$opt_disablerpath,
'enable-ipv6' => \$opt_ipv6,
'enable-remote-ipv6' => \$opt_ipv6links,
'disable-remote-ipv6' => \$opt_noipv6links,
'with-cc=s' => \$opt_cc,
- 'with-ident-length=i' => \$opt_ident,
- 'with-quit-length=i' => \$opt_quit,
- 'with-topic-length=i' => \$opt_topic,
'with-maxbuf=i' => \$opt_maxbuf,
- 'with-kick-length=i' => \$opt_kick,
- 'with-gecos-length=i' => \$opt_gecos,
- 'with-away-length=i' => \$opt_away,
- 'with-max-modes=i' => \$opt_modes,
+ 'enable-freebsd-ports-openssl' => \$opt_freebsd_port,
'prefix=s' => \$opt_base_dir,
'config-dir=s' => \$opt_config_dir,
'module-dir=s' => \$opt_module_dir,
'update' => sub { update(); },
'svnupdate' => sub { svnupdate(); },
'clean' => sub { clean(); },
- 'update-root' => sub { update_root() },
'list-extras' => sub { list_extras; exit 0; }, # This, --enable-extras, and --disable-extras are for non-interactive managing.
'enable-extras=s@' => \@opt_enableextras, # ^
'disable-extras=s@' => \@opt_disableextras, # ^
(defined $opt_base_dir) ||
(defined $opt_binary_dir) ||
(defined $opt_nointeractive) ||
- (defined $opt_away) ||
- (defined $opt_gecos) ||
- (defined $opt_kick) ||
- (defined $opt_maxclients) ||
- (defined $opt_modes) ||
- (defined $opt_topic) ||
- (defined $opt_quit) ||
- (defined $opt_ident) ||
(defined $opt_cc) ||
(defined $opt_ipv6) ||
(defined $opt_ipv6links) ||
(defined $opt_kqueue) ||
(defined $opt_epoll) ||
(defined $opt_ports) ||
- (defined $opt_maxchans) ||
- (defined $opt_opermaxchans) ||
- (defined $opt_chan_length) ||
- (defined $opt_nick_length) ||
(defined $opt_use_openssl) ||
(defined $opt_nokqueue) ||
(defined $opt_noepoll) ||
(defined $opt_noports) ||
(defined $opt_maxbuf) ||
- (defined $opt_use_gnutls)
+ (defined $opt_use_gnutls) ||
+ (defined $opt_freebsd_port)
);
our $interactive = !$non_interactive;
chomp(our $topdir = getcwd());
our $this = resolve_directory($topdir); # PWD, Regardless.
our @modlist = (); # Declare for Module List..
-
our %config = (); # Initiate Configuration Hash..
$config{ME} = resolve_directory($topdir); # Present Working Directory
$config{LIBRARY_DIR} = $opt_library_dir;
}
chomp($config{HAS_GNUTLS} = `libgnutls-config --version 2>/dev/null | cut -c 1,2,3`); # GNUTLS Version.
-chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version
+
+if (defined $opt_freebsd_port)
+{
+ chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`);
+ chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`);
+ $config{USE_FREEBSD_BASE_SSL} = "n";
+}
+else
+{
+ if ($^O eq "freebsd")
+ {
+ # default: use base ssl
+ chomp($config{HAS_OPENSSL} = `openssl version | cut -d ' ' -f 2`); # OpenSSL version, freebsd specific
+ chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`); # Port version, may be different
+ }
+ else
+ {
+ chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version, others
+ $config{HAS_OPENSSL_PORT} = "";
+ }
+}
+
chomp(our $gnutls_ver = $config{HAS_GNUTLS});
chomp(our $openssl_ver = $config{HAS_OPENSSL});
$config{USE_GNUTLS} = "n";
$config{OPTIMISATI} = "-O2"; # DEBUGGING OFF!
}
-$config{NICK_LENGT} = "31"; # Default Nick Length
-if (defined $opt_nick_length)
-{
- $config{NICK_LENGT} = $opt_nick_length;
-}
-$config{CHAN_LENGT} = "64"; # Default Channel Name Length
-if (defined $opt_chan_length)
-{
- $config{CHAN_LENGT} = $opt_chan_length;
-}
-$config{MAXI_MODES} = "20"; # Default Max. Number of Modes set at once.
-if (defined $opt_modes)
-{
- $config{MAXI_MODES} = $opt_modes;
-}
$config{HAS_STRLCPY} = "false"; # strlcpy Check.
$config{HAS_STDINT} = "false"; # stdint.h check
$config{USE_KQUEUE} = "y"; # kqueue enabled
{
$config{SUPPORT_IP6LINKS} = "n";
}
-chomp($config{MAX_CLIENT_T} = `sh -c \"ulimit -n\"`); # FD Limit
-chomp($config{MAX_DESCRIPTORS} = `sh -c \"ulimit -n\"`); # Hard FD Limit
chomp($config{GCCVER} = `g++ -dumpversion | cut -c 1`); # Major GCC Version
+chomp($config{GCCMINOR} = `g++ -dumpversion | cut -c 3`);
$config{_SOMAXCONN} = SOMAXCONN; # Max connections in accept queue
$config{OSNAME} = $^O; # Operating System Name
$config{IS_DARWIN} = "NO"; # Is OSX?
}
our $exec = $config{CC} . " -dumpversion | cut -c 1";
chomp($config{GCCVER} = `$exec`); # Major GCC Version
+$exec = $config{CC} . " -dumpversion | cut -c 3";
+chomp($config{GCCMINOR} = `$exec`);
$config{MAKEORDER} = "ircd mods"; # build order
-$config{MAX_IDENT} = "12"; # max ident size
-$config{MAX_QUIT} = "255"; # max quit message size
-$config{MAX_TOPIC} = "307"; # max topic size
-$config{MAX_KICK} = "255"; # max kick message size
-$config{MAX_GECOS} = "128"; # max GECOS size
-$config{MAX_AWAY} = "200"; # max AWAY size
$config{MAXBUF} = "512"; # Max buffer size
-if (defined $opt_ident)
-{
- $config{MAX_IDENT} = $opt_ident;
-}
-if (defined $opt_quit)
-{
- $config{MAX_QUIT} = $opt_quit;
-}
-if (defined $opt_topic)
-{
- $config{MAX_TOPIC} = $opt_topic;
-}
-if (defined $opt_kick)
-{
- $config{MAX_KICK} = $opt_kick;
-}
-if (defined $opt_gecos)
-{
- $config{MAX_GECOS} = $opt_gecos;
-}
-if (defined $opt_away)
-{
- $config{MAX_AWAY} = $opt_away;
-}
if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)([a-z])?(\-[a-z][0-9])?$/) {
$config{HAS_OPENSSL} = $1;
$config{HAS_OPENSSL} = "";
}
-if ($config{GCCVER} eq "") {
+if (($config{GCCVER} eq "") || ($config{GCCMINOR} eq "")) {
print $config{CC} . " was not found! You require g++ (the GNU C++ compiler, part of GCC) to build InspIRCd!\n";
exit;
}
-our $fd_scan_fail = "";
-if (!$config{MAX_CLIENT_T}) {
- $config{MAX_CLIENT_T} = 1024; # Set a reasonable 'Default'
- $fd_scan_fail = "true"; # Used Later
-}
-
# Get and Set some important vars..
getmodules();
our ($has_epoll, $has_ports, $has_kqueue) = (0, 0, 0);
-sub update_root
-{
- eval {
- chomp($topdir = getcwd());
- $this = resolve_directory($topdir); # PWD, Regardless.
- getmodules();
- # Does the cache file exist?
- if (!getcache()) {
- # No, No it doesn't.. *BASH*
- print "You have not run ./configure before. Please do this before trying to run the update script.\n";
- exit 0;
- } else {
- print "Updating root files...\n";
- getosflags();
- if (defined($opt_disable_debug) && $opt_disable_debug == 1)
- {
- print "Disabling debug information (-g).\n";
- $config{OPTIMISATI} = "";
- getosflags();
- }
- $has_epoll = $config{HAS_EPOLL};
- $has_ports = $config{HAS_PORTS};
- $has_kqueue = $config{HAS_KQUEUE};
- write_root_files();
- makecache();
- print "Complete.\n";
- exit 0;
- }
- };
- if ($@)
- {
- print "Configure update failed: $@\n";
- }
- exit 1;
-}
-
sub update
{
eval {
open(FH,"<.svn/entries") or $fail = 1;
if ($fail) {
print "This is not an SVN copy of InspIRCd.\n";
- exit;
+ exit 1;
}
else
{
close(FH);
}
- system("svn update");
- system("perl configure -update");
+ open my $fd, "-|", "svn update";
+ my $configurechanged = 0; # Needs ./configure -update
+ my $coredirchanged = 0; # Needs ./configure -update
+ my $moduledirchanged = 0; # Needs ./configure -modupdate
+ my $rootincchanged = 0;
+ my @conflicted = ();
+ while (defined(my $line = <$fd>))
+ {
+ my ($action, $file);
+ print $line;
+ $line =~ m/^([ADUCG])\s+(.*)$/ or next;
+ ($action, $file) = ($1, $2);
+ if ($action eq "C")
+ {
+ push @conflicted, $file;
+ if ($file eq "configure")
+ {
+ $configurechanged = 1;
+ }
+ elsif ($file =~ m#^src/modules#)
+ {
+ $moduledirchanged = 1;
+ }
+ elsif ($file =~ m#^src/#)
+ {
+ $coredirchanged = 1;
+ }
+ elsif ($file =~ m/^\..*\.inc$/)
+ {
+ $rootincchanged = 1;
+ }
+ }
+ elsif ($action eq "U" || $action eq "G")
+ {
+ if ($file eq "configure")
+ {
+ $configurechanged = 1;
+ }
+ elsif ($file =~ m/^\..*\.inc$/)
+ {
+ $rootincchanged = 1;
+ }
+ }
+ elsif ($action eq "A" || $action eq "D")
+ {
+ if ($file =~ m#^src/modules#)
+ {
+ $moduledirchanged = 1;
+ }
+ elsif ($file =~ m#^src/#)
+ {
+ $coredirchanged = 1;
+ }
+ }
+ }
+ unless (close $fd) # close() waits for exit and returns false if the command failed
+ {
+ if ($! == 0)
+ {
+ print STDERR "Problem updating from SVN, please check above for errors\n";
+ }
+ else
+ {
+ print STDERR "Failed to run SVN: $!\n";
+ }
+ exit 1;
+ }
+ if (scalar(@conflicted) > 0)
+ {
+ print STDERR "\e[0;33;1mERROR:\e[0m You have local modifications which conflicted with the updates from SVN\n";
+ printf STDERR "Configure is not able to complete the update. Please resolve these conflicts, then run ./configure -%supdate\n", (($coredirchanged || $configurechanged) ? "" : "mod");
+ print "Conflicted files: " . join ", ", @conflicted . "\n";
+ exit 1;
+ }
+ if ($configurechanged || $coredirchanged)
+ {
+ system("perl configure -update");
+ }
+ elsif ($moduledirchanged || $rootincchanged)
+ {
+ system("perl configure -modupdate");
+ }
+ else
+ {
+ print "No need to update Makefiles.\n";
+ }
if (defined $opt_rebuild) {
system("make install");
}
print "Checking operating system version... ";
print getosflags() . "\n";
-if (defined $opt_maxclients)
-{
- $config{MAX_CLIENT} = $opt_maxclients;
-}
-
-if (!$config{MAX_CLIENT}) {
- # If the cache hasn't set the max clients, copy the variable of MAX_CLIENT_T, this
- # allows us to keep _T for testing purposes. (ie. "Are you sure you want to go
- # higher than the found value" :))
- $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
-}
-
printf "Checking if stdint.h exists... ";
$config{HAS_STDINT} = "true";
our $fail = 0;
dir, otherwise you won't have a config file!
Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
-Maximum file descriptors: \e[1;32m$config{MAX_CLIENT_T}\e[0m
Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
STOP
if ($rev eq "r0") {
print ".\n\n";
$config{CHANGE_COMPILER} = "n";
- print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.x\e[0m)\n";
+ print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
print "\e[1;32mIMPORTANT!\e[0m A GCC 2.x compiler has been detected, and
chomp(my $foo = `$config{CC} -dumpversion | cut -c 1`);
if ($foo ne "") {
chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
- print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.x\e[0m)\n";
+ chomp($config{GCCMINOR} = `$config{CC} -dumpversion | cut -c 3`);
+ print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
if ($config{GCCVER} < 3) {
print "\e[1;32mGCC 2.x WILL NOT WORK!\e[0m. Let's try that again, shall we?\n";
}
print "You have chosen to build an \e[1;32mIPV6-enabled\e[0m server.\nTo accept IPV4 users, you can still use IPV4 addresses\nin your port bindings..\n\n";
$config{SUPPORT_IP6LINKS} = "y";
} else {
- yesno('SUPPORT_IP6LINKS',"You have chosen to build an \e[1;32mIPV4-only\e[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers?\nIf you are using a recent operating\nsystem and are unsure, answer yes.\nIf you answer 'no' here, your InspIRCd server will be unable\nto parse IPV6 addresses (e.g. for CIDR bans)");
+ yesno('SUPPORT_IP6LINKS',"You have chosen to build an \e[1;32mIPV4-only\e[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers? If you are using a recent operating system and are\nunsure, answer yes. If you answer 'no' here, your InspIRCd server will\nbe unable to parse IPV6 addresses (e.g. for CIDR bans)\n\nEnable linking to servers which have IPV6 enabled?");
print "\n";
}
+ $config{USE_FREEBSD_BASE_SSL} = "n";
+ $config{USE_FREEBSD_PORTS_SSL} = "n";
+ if ($config{HAS_OPENSSL_PORT} ne "")
+ {
+ $config{USE_FREEBSD_PORTS_SSL} = "y";
+ print "I have detected the OpenSSL FreeBSD port installed on your system,\n";
+ print "version \e[1;32m".$config{HAS_OPENSSL_PORT}."\e[0m. Your base system OpenSSL is version \e[1;32m".$openssl_ver."\e[0m.\n\n";
+ yesno('USE_FREEBSD_PORTS_SSL', "Do you want to use the FreeBSD ports version?");
+ print "\n";
+ $config{USE_FREEBSD_BASE_SSL} = "y" if ($config{USE_FREEBSD_PORTS_SSL} eq "n");
+
+ if ($config{USE_FREEBSD_BASE_SSL} eq "n")
+ {
+ # update to port version
+ $openssl_ver = $config{HAS_OPENSSL_PORT};
+ }
+ }
+ else
+ {
+ $config{USE_FREEBSD_BASE_SSL} = "y" if ($^O eq "freebsd");
+ }
+
if (($config{HAS_GNUTLS} eq "y") && ($config{HAS_OPENSSL} eq "y")) {
print "I have detected both \e[1;32mGnuTLS\e[0m and \e[1;32mOpenSSL\e[0m on your system.\n";
print "I will default to GnuTLS. If you wish to use OpenSSL\n";
else {
print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed if\nyou intend to use OpenSSL, or that GnuTLS is in your path if you intend\nto use GnuTLS.\n\n";
}
-
- print "\nThe following questions will ask you for various figures relating\n";
- print "To your IRCd install. Please note that these should usually be left\n";
- print "as defaults unless you have a real reason to change them. If they\n";
- print "changed, then the values must be identical on all servers on your\n";
- print "network, or malfunctions and/or crashes may occur, with the exception\n";
- print "of the 'maximum number of clients' setting which may be different on\n";
- print "different servers on the network.\n\n";
-
- # File Descriptor Settings..
- promptnumeric("number of clients at any one time", "MAX_CLIENT_T");
- $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
- $config{MAX_DESCRIPTORS} = $config{MAX_CLIENT_T};
-
- promptnumeric("length of nicknames", "NICK_LENGT");
- promptnumeric("length of channel names", "CHAN_LENGT");
- promptnumeric("number of mode changes in one line", "MAXI_MODES");
- promptnumeric("length of an ident (username)", "MAX_IDENT");
- promptnumeric("length of a quit message", "MAX_QUIT");
- promptnumeric("length of a channel topic", "MAX_TOPIC");
- promptnumeric("length of a kick message", "MAX_KICK");
- promptnumeric("length of a GECOS (real name)", "MAX_GECOS");
- promptnumeric("length of an away message", "MAX_AWAY");
}
dumphash();
# Beware: Linux sets it's own cflags below for some retarded reason
$config{LDLIBS} = "-pthread -lstdc++";
- $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wall $config{OPTIMISATI}";
- $config{DEVELOPER} = "-fPIC -Woverloaded-virtual -Wshadow -Wall -g";
- $SHARED = "-Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared" unless defined $opt_disablerpath;
+ $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wformat=2 -Wmissing-format-attribute -Wall $config{OPTIMISATI}";
+ $config{DEVELOPER} = "-fPIC -Woverloaded-virtual -Wshadow -Wall -Wformat=2 -Wmissing-format-attribute -g";
+ $SHARED = "-shared";
$config{MAKEPROG} = "make";
if ($config{OSNAME} =~ /darwin/i) {
if ($foo ne "") {
$config{CC} = "eg++";
chomp($config{GCCVER} = `eg++ -dumpversion | cut -c 1`); # we must redo these if we change the compiler path
+ chomp($config{GCCMINOR} = `eg++ -dumpversion | cut -c 3`);
}
return "OpenBSD";
}
if ($config{OSNAME} =~ /Linux/i) {
$config{LDLIBS} = "-ldl -lstdc++ -pthread";
- $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wall $config{OPTIMISATI}";
+# $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wall $config{OPTIMISATI}";
$config{FLAGS} .= " " . $ENV{CXXFLAGS} if exists($ENV{CXXFLAGS});
$config{LDLIBS} .= " " . $ENV{LDLIBS} if exists($ENV{LDLIBS});
$config{MAKEPROG} = "make";
my ($mliflags, $mfrules, $mobjs, $mfcount) = ("", "", "", 0);
-sub write_root_files {
- # Create a Modules List..
- my $modules = "";
- foreach my $i (@modlist)
- {
- $modules .= "m_".$i.".so ";
- }
- chomp($modules); # Remove Redundant whitespace..
-
- opendir(DIRHANDLE, "src/modules");
- foreach my $name (sort readdir(DIRHANDLE)) {
- if ($name =~ /^m_(.+?)$/) {
- if (defined(opendir(MDIRHANDLE, "src/modules/$name"))) {
- closedir(MDIRHANDLE);
- $modules .= "$name.so ";
- $uninstall_list = $uninstall_list . " -rm \$(MODULES)/$name.so\n";
- }
- }
- }
- closedir(DIRHANDLE);
-
- # Write all .in files.
- my $exe = "inspircd";
-
- # Do this once here, and cache it in the .*.inc files,
- # rather than attempting to read src/version.sh from
- # compiled code -- we might not have the source to hand.
- # Fix for bug#177 by Brain.
-
- chomp(my $version = `sh ./src/version.sh`);
- chomp(my $revision = getrevision());
- $version = "$version(r$revision)";
-
- # We can actually parse any file starting with . and ending with .inc,
- # but right now we only parse .inspircd.inc to form './inspircd'
-
- opendir(DIRHANDLE, $this);
-
- foreach my $name (sort readdir(DIRHANDLE)) {
- if ($name =~ /^\.(.+)\.inc$/) {
- my $file = $1;
-
- # Bug #353, omit this on non-darwin
- next if (($config{OSNAME} !~ /darwin/) && ($file eq "org.inspircd.plist"));
-
- # All .name.inc files need parsing!
- my $tmp = "";
- open(FILEHANDLE, ".$file.inc") or die ("Can't open .$file.inc");
- while (<FILEHANDLE>) {
- $tmp .= $_;
- }
- close(FILEHANDLE);
-
- print "Writing \e[1;32m$file\e[0m ...\n";
- $tmp =~ s/\@CC\@/$config{CC}/ if defined $config{CC};
- $tmp =~ s/\@MAKEPROG\@/$config{MAKEPROG}/ if defined $config{MAKEPROG};
- $tmp =~ s/\@FLAGS\@/$config{FLAGS}/ if defined $config{FLAGS};
- $tmp =~ s/\@DEVELOPER\@/$config{DEVELOPER}/ if defined $config{DEVELOPER};
- $tmp =~ s/\@LDLIBS\@/$config{LDLIBS}/ if defined $config{LDLIBS};
- $tmp =~ s/\@BASE_DIR\@/$config{BASE_DIR}/ if defined $config{BASE_DIR};
- $tmp =~ s/\@CONFIG_DIR\@/$config{CONFIG_DIR}/ if defined $config{CONFIG_DIR};
- $tmp =~ s/\@MODULE_DIR\@/$config{MODULE_DIR}/ if defined $config{MODULE_DIR};
- $tmp =~ s/\@BINARY_DIR\@/$config{BINARY_DIR}/ if defined $config{BINARY_DIR};
- $tmp =~ s/\@LIBRARY_DIR\@/$config{LIBRARY_DIR}/ if defined $config{LIBRARY_DIR};
- $tmp =~ s/\@MODULES\@/$modules/ if defined $modules;
- $tmp =~ s/\@STARTSCRIPT\@/$config{STARTSCRIPT}/ if defined $config{STARTSCRIPT};
- $tmp =~ s/\@DESTINATION\@/$config{DESTINATION}/ if defined $config{DESTINATION};
- $tmp =~ s/\@EXTRA_DIR\@/$config{EXTRA_DIR}/ if defined $config{EXTRA_DIR};
- $tmp =~ s/\@EXECUTABLE\@/$exe/ if defined $exe;
- $tmp =~ s/\@MAKEORDER\@/$config{MAKEORDER}/ if defined $config{MAKEORDER};
- $tmp =~ s/\@VERSION\@/$version/ if defined $version;
- $tmp =~ s/\@INSTALL_LIST\@/$install_list/ if defined $install_list;
- $tmp =~ s/\@UNINSTALL_LIST\@/$uninstall_list/ if defined $uninstall_list;
-
- open(FILEHANDLE, ">$file");
- print FILEHANDLE $tmp;
- }
- }
- closedir(DIRHANDLE);
-
- # Make inspircd executable!
- chmod 0744, 'inspircd';
-
-}
-
sub writefiles {
my($writeheader) = @_;
my $se = "";
{
print "Writing \e[1;32minspircd_config.h\e[0m\n";
open(FILEHANDLE, ">include/inspircd_config.h");
- my $NL = $config{NICK_LENGT}+1;
- my $CL = $config{CHAN_LENGT}+1;
print FILEHANDLE <<EOF;
/* Auto generated by configure, do not modify! */
#ifndef __CONFIGURATION_AUTO__
#define MOD_PATH "$config{MODULE_DIR}"
#define VERSION "$version"
#define REVISION "$revision2"
-#define MAXCLIENTS $config{MAX_CLIENT}
-#define MAXCLIENTS_S "$config{MAX_CLIENT}"
#define SOMAXCONN_S "$config{_SOMAXCONN}"
-#define MAX_DESCRIPTORS $config{MAX_DESCRIPTORS}
-#define NICKMAX $NL
-#define CHANMAX $CL
-#define MAXMODES $config{MAXI_MODES}
-#define IDENTMAX $config{MAX_IDENT}
-#define MAXQUIT $config{MAX_QUIT}
-#define MAXTOPIC $config{MAX_TOPIC}
-#define MAXKICK $config{MAX_KICK}
-#define MAXGECOS $config{MAX_GECOS}
-#define MAXAWAY $config{MAX_AWAY}
#define OPTIMISATION $config{OPTIMITEMP}
#define LIBRARYDIR "$config{LIBRARY_DIR}"
#define SYSTEM "$incos"
+#define ENTRYPOINT int main(int argc, char** argv)
EOF
print FILEHANDLE "#define MAXBUF " . ($config{MAXBUF}+2) . "\n";
if ($config{GCCVER} >= 3) {
print FILEHANDLE "#define GCC3\n";
}
+ if (
+ (($config{GCCVER} == 4) && ($config{GCCMINOR} >= 3))
+ ||
+ ($config{GCCVER} > 4)
+ ) {
+ print FILEHANDLE "#define HASHMAP_DEPRECATED\n";
+ }
if ($config{HAS_STRLCPY} eq "true") {
print FILEHANDLE "#define HAS_STRLCPY\n";
}
close(FILEHANDLE);
}
- write_root_files();
+
+ # Create a Modules List..
+ my $modules = "";
+ foreach my $i (@modlist)
+ {
+ $modules .= "m_".$i.".so ";
+ }
+ chomp($modules); # Remove Redundant whitespace..
+
+ opendir(DIRHANDLE, "src/modules");
+ foreach my $name2 (sort readdir(DIRHANDLE)) {
+ if ($name2 =~ /^m_(.+?)$/) {
+ if (defined(opendir(MDIRHANDLE, "src/modules/$name2"))) {
+ closedir(MDIRHANDLE);
+ $modules .= "$name2.so ";
+ $uninstall_list = $uninstall_list . " -rm \$(MODULES)/$name2.so\n";
+ }
+ }
+ }
+ closedir(DIRHANDLE);
+
+
+ # Write all .in files.
+ my $tmp = "";
+ my $file = "";
+ my $exe = "inspircd";
+
+ # Do this once here, and cache it in the .*.inc files,
+ # rather than attempting to read src/version.sh from
+ # compiled code -- we might not have the source to hand.
+ # Fix for bug#177 by Brain.
+
+ chomp($version = `sh ./src/version.sh`);
+ chomp(my $revision = getrevision());
+ $version = "$version(r$revision)";
+
+ # We can actually parse any file starting with . and ending with .inc,
+ # but right now we only parse .inspircd.inc to form './inspircd'
print "Writing \e[1;32mMakefiles\e[0m\n";
write_dynamic_modules_makefile();
write_dynamic_makefile();
+ opendir(DIRHANDLE, $this);
+
+ foreach my $name (sort readdir(DIRHANDLE)) {
+ if ($name =~ /^\.(.+)\.inc$/) {
+ $file = $1;
+
+ # Bug #353, omit this on non-darwin
+ next if (($config{OSNAME} !~ /darwin/) && ($file eq "org.inspircd.plist"));
+
+ # All .name.inc files need parsing!
+ $tmp = "";
+ open(FILEHANDLE, ".$file.inc") or die ("Can't open .$file.inc");
+ while (<FILEHANDLE>) {
+ $tmp .= $_;
+ }
+ close(FILEHANDLE);
+
+ print "Writing \e[1;32m$file\e[0m ...\n";
+ $tmp =~ s/\@CC\@/$config{CC}/ if defined $config{CC};
+ $tmp =~ s/\@MAKEPROG\@/$config{MAKEPROG}/ if defined $config{MAKEPROG};
+ $tmp =~ s/\@FLAGS\@/$config{FLAGS}/ if defined $config{FLAGS};
+ $tmp =~ s/\@DEVELOPER\@/$config{DEVELOPER}/ if defined $config{DEVELOPER};
+ $tmp =~ s/\@LDLIBS\@/$config{LDLIBS}/ if defined $config{LDLIBS};
+ $tmp =~ s/\@BASE_DIR\@/$config{BASE_DIR}/ if defined $config{BASE_DIR};
+ $tmp =~ s/\@CONFIG_DIR\@/$config{CONFIG_DIR}/ if defined $config{CONFIG_DIR};
+ $tmp =~ s/\@MODULE_DIR\@/$config{MODULE_DIR}/ if defined $config{MODULE_DIR};
+ $tmp =~ s/\@BINARY_DIR\@/$config{BINARY_DIR}/ if defined $config{BINARY_DIR};
+ $tmp =~ s/\@LIBRARY_DIR\@/$config{LIBRARY_DIR}/ if defined $config{LIBRARY_DIR};
+ $tmp =~ s/\@MODULES\@/$modules/ if defined $modules;
+ $tmp =~ s/\@STARTSCRIPT\@/$config{STARTSCRIPT}/ if defined $config{STARTSCRIPT};
+ $tmp =~ s/\@DESTINATION\@/$config{DESTINATION}/ if defined $config{DESTINATION};
+ $tmp =~ s/\@EXTRA_DIR\@/$config{EXTRA_DIR}/ if defined $config{EXTRA_DIR};
+ $tmp =~ s/\@EXECUTABLE\@/$exe/ if defined $exe;
+ $tmp =~ s/\@MAKEORDER\@/$config{MAKEORDER}/ if defined $config{MAKEORDER};
+ $tmp =~ s/\@VERSION\@/$version/ if defined $version;
+ $tmp =~ s/\@INSTALL_LIST\@/$install_list/ if defined $install_list;
+ $tmp =~ s/\@UNINSTALL_LIST\@/$uninstall_list/ if defined $uninstall_list;
+
+ open(FILEHANDLE, ">$file");
+ print FILEHANDLE $tmp;
+ }
+ }
+ closedir(DIRHANDLE);
+
+ # Make inspircd executable!
+ chmod 0744, 'inspircd';
}
sub write_dynamic_modules_makefile {
my $i = 0;
my @cmdlist = ();
my %existing_install_list = ();
+ my %core_files_list = ();
+
opendir(DIRHANDLE, "src/commands");
foreach my $name (sort readdir(DIRHANDLE))
{
$config{USE_PORTS} = 0;
}
+ # formerly generated below this foreach, now it's not! magic.
+ my $all_core = "";
+
foreach my $dir (("src","src/commands","src/modes","src/socketengines","src/modules"))
{
print "Scanning \e[1;32m$dir\e[0m for core files ";
while (defined(my $line = <CPP>))
{
chomp($line);
- if ($line =~ /\/\* \$Core: (\w+) \*\//i)
+ if ($line =~ /\/\* \$Core \*\//i)
{
- $filelist{$name} = $1;
+ my $sname = $name;
+ $sname =~ s/\.cpp$/.o/;
+
+ # append it to list to be built
+ $all_core = $all_core . $sname . " ";
+ $filelist{$name} = $sname;
+
+ # mark it as a core file, so it won't get shared object cflags
+ if (!exists($core_files_list{$name}))
+ {
+ $core_files_list{$name} = 1;
+ }
}
elsif ($line =~ /\/\* \$ExtraDeps: (.*?) \*\//i)
{
print " done!\n";
}
- my $freebsd4libs = (defined $config{CRAQ} ? $config{CRAQ} : "");
+ # modes need to be compiled in too
+ $all_core = $all_core . "modes/modeclasses.a";
- my $all = "all: ";
- my $all_libsonly = "";
+ my $freebsd4libs = (defined $config{CRAQ} ? $config{CRAQ} : "");
my $libraryext = "";
- my $othercrap = "";
- my $RPATH = "";
+ my $binary_rule = "";
if ($config{IS_DARWIN} eq "YES")
{
$libraryext = "dylib";
- $othercrap = " \@../make/run-cc.pl \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspircd.cpp\n \@../make/run-cc.pl \$(CC) -pipe -dynamic -bind_at_load -L. -o inspircd \$(LDLIBS) inspircd.o "
+ $binary_rule = " \@../make/run-cc.pl \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspircd.cpp\n \@../make/run-cc.pl \$(CC) -pipe -dynamic -bind_at_load -L. -o inspircd \$(LDLIBS) inspircd.o "
}
else
{
$libraryext = "so";
- $RPATH = "-Wl,--rpath -Wl,$config{LIBRARY_DIR}" unless defined $opt_disablerpath;
- $othercrap = " \@../make/run-cc.pl \$(CC) -pipe -I../include $RPATH \$(FLAGS) $freebsd4libs -rdynamic -L. inspircd.cpp -o inspircd \$(LDLIBS) ";
+ $binary_rule = " \@../make/run-cc.pl \$(CC) -pipe -I../include \$(FLAGS) $freebsd4libs -rdynamic -L. inspircd.cpp -o inspircd \$(LDLIBS) ";
}
- foreach my $cpp (sort keys %filelist)
- {
- $all = $all . $filelist{$cpp} . "." . $libraryext . " ";
- $all_libsonly = $all_libsonly . $filelist{$cpp} . "." . $libraryext . " ";
- $install_list = $install_list . " -install -m \$(INSTMODE) src/" . $filelist{$cpp} . "." . $libraryext . " \$(LIBPATH)\n";
- $uninstall_list = $uninstall_list . " -rm \$(LIBPATH)/" . $filelist{$cpp} . "." . $libraryext . "\n";
- }
- $all = $all . "moo inspircd\n";
-
- $othercrap = $othercrap . " $all_libsonly\n\n";
-
open(FH,">src/Makefile") or die("Could not write src/Makefile");
print FH <<EOM;
EOM
- print FH "$all\n\n";
-
- my $deps = calcdeps("src/inspircd.cpp");
- print FH "inspircd: inspircd.cpp $deps $all_libsonly\n";
- print FH "$othercrap\n";
+ my $buildstring = "";
+ my $deps = "";
foreach my $cpp (sort keys %filelist)
{
- my $thislib = $filelist{$cpp} . "." . $libraryext;
my $objs = $cpp;
my $rawcpp = $cpp;
- my $libcrap = "";
$objs =~ s/\.cpp$/.o/;
if (exists($extraobjects{$cpp}))
{
$objs = $objs . " " . $extraobjects{$cpp};
+ $all_core = $all_core . " " . $extraobjects{$cpp};
}
if (exists($extrasources{$cpp}))
{
$rawcpp = $rawcpp . " " . $extrasources{$cpp};
}
- if ($config{IS_DARWIN} eq "YES")
- {
- $libcrap = "-install_name " . $config{LIBRARY_DIR} . "/" . $thislib . " -dynamiclib -twolevel_namespace -undefined dynamic_lookup";
- }
- else
- {
- if (defined $opt_disablerpath)
- {
- $libcrap = " -shared";
- }
- else
- {
- $libcrap = "-Wl,--rpath -Wl," . $config{LIBRARY_DIR} . " -shared";
- }
- }
+
$deps = calcdeps("src/$cpp");
if (exists($extrasources{$cpp}))
{
}
}
}
- print FH $thislib . ": $cpp $deps ". (defined($specialdeps{$cpp}) ? $specialdeps{$cpp} : "") . "\n";
- print FH " \@../make/run-cc.pl \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c $rawcpp\n";
+ $buildstring = $buildstring . $objs . ": $cpp $deps ". (defined($specialdeps{$cpp}) ? $specialdeps{$cpp} : "") . "\n";
+
+ if (exists($core_files_list{$cpp}))
+ {
+ # core files are statically linked into the binary and do not require -export-dynamic
+ $buildstring = $buildstring . " \@../make/run-cc.pl \$(CC) -pipe -I../include \$(FLAGS) -c $rawcpp\n";
+ }
+ else
+ {
+ $buildstring = $buildstring . " \@../make/run-cc.pl \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c $rawcpp\n";
+ }
+
if (exists($extrabuildlines{$cpp}))
{
- print FH " " . $extrabuildlines{$cpp} . "\n";
+ $buildstring = $buildstring . " " . $extrabuildlines{$cpp} . "\n";
}
- print FH " \@../make/run-cc.pl \$(CC) -pipe $libcrap -o " . $thislib . " " . $objs . "\n\n";
}
+ print FH "all: inspircd moo\n\n\n";
+
+ $deps = calcdeps("src/inspircd.cpp");
+ print FH "inspircd: inspircd.cpp $deps $all_core\n";
+ print FH "$binary_rule $all_core\n\n";
+
+ print FH $buildstring;
print FH "moo:\n \@\${MAKE} -C \"commands\" DIRNAME=\"src/commands\" CC=\"\$(CC)\" \$(MAKEARGS)\n\n";
# close main makefile
# now print the command file details.
foreach my $cmd (@cmdlist) {
print FH <<ITEM;
-cmd_$cmd.so: cmd_$cmd.cpp ../../include/base.h ../../include/modules.h ../../include/inspircd.h ../../include/channels.h ../../include/users.h ../../include/globals.h ../../include/inspircd_config.h ../../include/commands/cmd_$cmd.h
+cmd_$cmd.so: cmd_$cmd.cpp ../../include/base.h ../../include/modules.h ../../include/inspircd.h ../../include/channels.h ../../include/users.h ../../include/inspircd_config.h ../../include/commands/cmd_$cmd.h
\@../../make/run-cc.pl \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic $SHARED -o cmd_$cmd.so cmd_$cmd.cpp
ITEM
projects / user / henk / code / inspircd.git / blobdiff