'binary-dir=s' => \$opt_binary_dir,
'data-dir=s' => \$opt_data_dir,
'log-dir=s' => \$opt_log_dir,
- 'help' => sub { showhelp(); },
- 'update' => sub { update(); },
- 'clean' => sub { clean(); },
+ 'help' => \&cmd_help,
+ 'update' => \&cmd_update,
+ 'clean' => \&cmd_clean,
'list-extras' => sub { list_extras; exit 0; }, # This, --enable-extras, and --disable-extras are for non-interactive managing.
'enable-extras=s@' => \@opt_enableextras, # ^
'disable-extras=s@' => \@opt_disableextras, # ^
);
our $topdir = getcwd();
-our @modlist = ();
-our %config = ();
-our $cache_loaded = getcache();
+our %config = read_configure_cache();
+
+print "Checking for cache from previous configure... ";
+print %config ? "found\n" : "not found\n";
$config{BASE_DIR} = $topdir."/run";
$config{BINARY_DIR} = rel2abs($config{BASE_DIR}."/bin");
$config{BUILD_DIR} = rel2abs($topdir."/build");
$config{DATA_DIR} = rel2abs($config{BASE_DIR}."/data");
- $config{LOG_DIR} = rel2abs($config{BASE_DIR}."/logs");
+ $config{LOG_DIR} = rel2abs($config{BASE_DIR}."/logs");
}
if (defined $opt_config_dir) {
$config{HAS_OPENSSL} = "";
}
-# Get and Set some important vars..
-getmodules();
-
-sub clean
-{
- unlink(".config.cache");
-}
-
-sub update
-{
- eval {
- # Does the cache file exist?
- if (!getcache()) {
- # No, No it doesn't.. *BASH*
- print "You have not run ./configure before. Please do this before trying to run the update script.\n";
- exit 1;
- } else {
- # We've Loaded the cache file and all our variables..
- $topdir = getcwd();
- getmodules();
- print "Updating files...\n";
- %cxx = get_compiler_info($config{CXX});
- writefiles();
- makecache();
- print "Complete.\n";
- exit;
- }
- };
- if ($@)
- {
- print "Configure update failed: $@\n";
- }
- exit;
-}
-
-print "Running non-interactive configure...\n" unless $interactive;
-print "Checking for cache from previous configure... ";
-print ($cache_loaded ? "found\n" : "not found\n");
-
$config{HAS_CLOCK_GETTIME} = run_test 'clock_gettime()', test_file($config{CXX}, 'clock_gettime.cpp', '-lrt');
$config{HAS_EVENTFD} = run_test 'eventfd()', test_file($config{CXX}, 'eventfd.cpp');
# Clear the screen.
system 'tput', 'clear';
- my $revision = getrevision();
+ my $revision = get_revision();
chomp(my $version = `sh src/version.sh`);
# Display Introduction Message..
# Directory Settings..
my $tmpbase = $config{BASE_DIR};
- dir_check("do you wish to install the InspIRCd base", "BASE_DIR");
+ $config{BASE_DIR} = prompt_dir(1, 'What directory do you wish to install the InspIRCd base?', $config{BASE_DIR});
if ($tmpbase ne $config{BASE_DIR}) {
$config{CONFIG_DIR} = rel2abs($config{BASE_DIR}."/conf");
$config{MODULE_DIR} = rel2abs($config{BASE_DIR}."/modules");
$config{BINARY_DIR} = rel2abs($config{BASE_DIR}."/bin");
}
- dir_check("are the configuration files", "CONFIG_DIR");
- dir_check("are the modules to be compiled to", "MODULE_DIR");
- dir_check("is the IRCd binary to be placed", "BINARY_DIR");
- dir_check("are variable data files to be located in", "DATA_DIR");
- dir_check("are the logs to be stored in", "LOG_DIR");
- dir_check("do you want the build to take place", "BUILD_DIR");
-
+ $config{BINARY_DIR} = prompt_dir(1, 'In what directory should the InspIRCd binary be placed?', $config{BINARY_DIR});
+ $config{CONFIG_DIR} = prompt_dir(1, 'In what directory are the configuration files to be stored?', $config{CONFIG_DIR});
+ $config{DATA_DIR} = prompt_dir(1, 'In what directory are variable data files to be stored?', $config{DATA_DIR});
+ $config{LOG_DIR} = prompt_dir(1, 'In what directory are log files to be stored?', $config{LOG_DIR});
+ $config{MODULE_DIR} = prompt_dir(1, 'In what directory are the modules to be placed?', $config{MODULE_DIR});
+ $config{BUILD_DIR} = prompt_dir(1, 'In what directory do you want the build to take place?', $config{BUILD_DIR});
+
my $chose_hiperf = 0;
if ($config{HAS_KQUEUE}) {
- $config{USE_KQUEUE} = "y";
- yesno('USE_KQUEUE',"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
- print "\n";
- if ($config{USE_KQUEUE} eq "y") {
+ $config{USE_KQUEUE} = prompt_bool(1, 'Your operating system has support for the high performance kqueue socket engine. Would you like to enable it?', 1);
+ if ($config{USE_KQUEUE}) {
$config{SOCKETENGINE} = "kqueue";
$chose_hiperf = 1;
}
}
if ($config{HAS_EPOLL}) {
- $config{USE_EPOLL} = "y";
- yesno('USE_EPOLL',"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
- print "\n";
- if ($config{USE_EPOLL} eq "y") {
+ $config{USE_EPOLL} = prompt_bool(1, 'Your operating system has support for the high performance epoll socket engine. Would you like to enable it?', 1);
+ if ($config{USE_EPOLL}) {
$config{SOCKETENGINE} = "epoll";
$chose_hiperf = 1;
}
}
if ($config{HAS_PORTS}) {
- $config{USE_PORTS} = "y";
- yesno('USE_PORTS',"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
- print "\n";
- if ($config{USE_PORTS} eq "y") {
+ $config{USE_PORTS} = prompt_bool(1, 'Your operating system has support for the high performance IOCP socket engine. Would you like to enable it?', 1);
+ if ($config{USE_PORTS}) {
$config{SOCKETENGINE} = "ports";
$chose_hiperf = 1;
}
}
if (!$chose_hiperf && $config{HAS_POLL}) {
- $config{USE_POLL} = "y";
- yesno('USE_POLL', "Would you like to use poll?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?");
- if ($config{USE_POLL} eq "y") {
+ $config{USE_POLL} = prompt_bool(1, 'Your operating system has support for the mid performance poll socket engine. Would you like to enable it?', 1);
+ if ($config{USE_POLL}) {
$config{SOCKETENGINE} = "poll";
}
}
- if (!$chose_hiperf && $config{USE_POLL} ne "y")
+ unless ($chose_hiperf || $config{USE_POLL})
{
- print "No high-performance socket engines are available, or you chose\n";
- print "not to enable one. Defaulting to select() engine.\n\n";
+ print "No high-performance socket engines are available, or you chose not to enable one. Defaulting to select() engine.\n\n";
$config{SOCKETENGINE} = "select";
}
- $config{USE_SSL} = "n";
-
if ($config{HAS_GNUTLS} eq "y" || $config{HAS_OPENSSL} eq "y")
{
print "Detected GnuTLS version: \e[1;32m" . $gnutls_ver . "\e[0m\n";
print "Detected OpenSSL version: \e[1;32m" . $openssl_ver . "\e[0m\n\n";
- yesno('USE_SSL', "One or more SSL libraries detected. Would you like to enable SSL support?");
- if ($config{USE_SSL} eq "y")
+ $config{USE_SSL} = prompt_bool(1, 'One or more SSL libraries detected. Would you like to enable SSL support?', 1);
+ if ($config{USE_SSL})
{
if ($config{HAS_GNUTLS} eq "y")
{
- yesno('USE_GNUTLS',"Would you like to enable SSL with m_ssl_gnutls? (recommended)");
- if ($config{USE_GNUTLS} eq "y")
+ $config{USE_GNUTLS} = prompt_bool(1, 'Would you like to enable SSL with m_ssl_gnutls (recommended)?', 1);
+ if ($config{USE_GNUTLS})
{
- print "\nUsing GnuTLS SSL module.\n";
+ print "Using GnuTLS SSL module.\n\n";
+ unlink 'src/modules/m_ssl_gnutls.cpp' if -f 'src/modules/m_ssl_gnutls.cpp';
+ symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!\n";
}
}
if ($config{HAS_OPENSSL} eq "y")
{
- yesno('USE_OPENSSL', "Would you like to enable SSL with m_ssl_openssl?");
- if ($config{USE_OPENSSL} eq "y")
+ $config{USE_OPENSSL} = prompt_bool(1, 'Would you like to enable SSL with m_ssl_openssl (recommended)?', 1);
+ if ($config{USE_OPENSSL})
{
- print "\nUsing OpenSSL SSL module.\n";
+ print "Using OpenSSL SSL module.\n\n";
+ unlink 'src/modules/m_ssl_openssl.cpp' if -f 'src/modules/m_ssl_openssl.cpp';
+ symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!\n";
}
}
}
# We are on a POSIX system, we can enable POSIX extras without asking
symlink "extra/m_regex_posix.cpp", "src/modules/m_regex_posix.cpp";
-if (($config{USE_GNUTLS} eq "y") && ($config{HAS_GNUTLS} ne "y"))
+if (($config{USE_GNUTLS}) && ($config{HAS_GNUTLS} ne "y"))
{
print "Sorry, but i couldn't detect gnutls. Make sure pkg-config is in your path.\n";
exit 1;
}
-if (($config{USE_OPENSSL} eq "y") && ($config{HAS_OPENSSL} ne "y"))
+if (($config{USE_OPENSSL}) && ($config{HAS_OPENSSL} ne "y"))
{
print "Sorry, but i couldn't detect openssl. Make sure pkg-config is in your path.\n";
exit 1;
}
-$config{CERTGEN} ||= 'y';
-yesno('CERTGEN',"Would you like generate SSL certificates now?") if ($interactive && ($config{USE_GNUTLS} eq "y" || $config{USE_OPENSSL} eq "y"));
-
-if ($config{USE_GNUTLS} eq "y") {
- unless (-r "src/modules/m_ssl_gnutls.cpp") {
- print "Symlinking src/modules/m_ssl_gnutls.cpp from extra/\n";
- symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!";
- }
- if ($interactive && $config{CERTGEN} eq 'y')
- {
+if ($config{USE_GNUTLS} || $config{USE_OPENSSL}) {
+ if (my $val = prompt_bool($interactive, 'Would you like to generate SSL certificates now?', $interactive)) {
unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem" && -r "$config{CONFIG_DIR}/dhparams.pem") {
- unless (system './tools/genssl gnutls') {
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
- print "Done.\n\n";
- }
- }
- else {
- print "SSL Certificates found, skipping.\n\n";
- }
- }
- else
- {
- print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
- }
-}
-
-if ($config{USE_OPENSSL} eq "y") {
- unless (-r "src/modules/m_ssl_openssl.cpp") {
- print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
- symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!";
- }
- if ($interactive && $config{CERTGEN} eq 'y')
- {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem" && -r "$config{CONFIG_DIR}/dhparams.pem") {
- unless (system './tools/genssl openssl') {
+ unless (system './tools/genssl auto') {
print "\nCertificate generation complete, copying to config directory... ";
File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
} else {
print "SSL Certificates found, skipping.\n\n"
}
+ } else {
+ print "Skipping SSL certificate generation in non-interactive mode.\n\n";
}
- else
- {
- print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
- }
-}
-if (($config{USE_GNUTLS} eq "n") && ($config{USE_OPENSSL} eq "n")) {
+} else {
print "Skipping SSL Certificate generation, SSL support is not available.\n\n";
}
-getmodules();
+print "Writing \e[1;32m.config.cache\e[0m ...\n";
+write_configure_cache(%config);
writefiles();
-makecache();
-dumphash();
+dump_hash();
print "\n";
print "To build your server with these settings, please run '\e[1;32mmake\e[0m' now.\n";
-if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
+if ($config{USE_GNUTLS} || $config{USE_OPENSSL}) {
print "Please note: for \e[1;32mSSL support\e[0m you will need to load required\n";
print "modules in your config. This configure script has added those modules to the\n";
print "build process. For more info please refer to:\n";
}
print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n";
-sub getcache {
- # Retrieves the .config.cache file, and loads values into the main config hash.
- open(CACHE, ".config.cache") or return 0;
- while (<CACHE>) {
- chomp;
- # Ignore Blank lines, and comments..
- next if /^\s*$/;
- next if /^\s*#/;
- my ($key, $value) = split("=", $_, 2);
- $value =~ /^\"(.*)\"$/;
- # Do something with data here!
- $config{$key} = $1;
- }
- close(CACHE);
- return 1;
-}
-
-sub makecache {
- # Dump the contents of %config
- print "Writing \e[1;32mcache file\e[0m for future ./configures ...\n";
- open(FILEHANDLE, ">.config.cache");
- foreach my $key (keys %config) {
- print FILEHANDLE "$key=\"$config{$key}\"\n";
- }
- close(FILEHANDLE);
-}
-
-sub dir_check {
- my ($desc, $hash_key) = @_;
- my $complete = 0;
- while (!$complete) {
- print "In what directory $desc?\n";
- print "[\e[1;32m$config{$hash_key}\e[0m] -> ";
- chomp(my $var = <STDIN>);
- if ($var eq "") {
- $var = $config{$hash_key};
- }
- if ($var =~ /^\~\/(.+)$/) {
- # Convert it to a full path..
- $var = rel2abs($ENV{HOME} . "/" . $1);
- }
- $var = rel2abs($var);
- if (! -e $var) {
- print "$var does not exist. Create it?\n[\e[1;32my\e[0m] ";
- chomp(my $tmp = <STDIN>);
- if (($tmp eq "") || ($tmp =~ /^y/i)) {
- # Attempt to Create the Dir..
- my $chk = eval {
- use File::Path ();
- File::Path::mkpath($var, 0, 0777);
- 1;
- };
- unless (defined($chk) && -d $var) {
- print "Unable to create directory. ($var)\n\n";
- # Restart Loop..
- next;
- }
- } else {
- # They said they don't want to create, and we can't install there.
- print "\n\n";
- next;
- }
- } else {
- if (! -d $var) {
- # Target exists, but is not a directory.
- print "File $var exists, but is not a directory.\n\n";
- next;
- }
- }
- # Either Dir Exists, or was created fine.
- $config{$hash_key} = $var;
- $complete = 1;
- print "\n";
- }
-}
-
sub writefiles {
chomp(my $incos = `uname -n -s -r`);
chomp(my $version = `sh src/version.sh`);
- my $revision = getrevision();
+ my $revision = get_revision();
my $branch = "InspIRCd-0.0";
if ($version =~ /^(InspIRCd-[0-9]+\.[0-9]+)\.[0-9]+/)
{
}
}
- chmod 0755, 'inspircd';
+ chmod 0750, 'inspircd';
}
# Routine to list out the extra/ modules that have been enabled.
projects / user / henk / code / inspircd.git / blobdiff