###################################################
# InspIRCd Configuration Script
#
-# Copyright 2002-2007 The InspIRCd Development Team
+# Copyright 2002-2008 The InspIRCd Development Team
# http://www.inspircd.org/wiki/index.php/Credits
#
# Licensed under GPL, please see the COPYING file
our %extrasources = ();
our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_nick_length,
- $opt_chan_length, $opt_maxclients, $opt_ports, $opt_epoll, $opt_kqueue, $opt_noports,
+ $opt_chan_length, $opt_ports, $opt_epoll, $opt_kqueue, $opt_noports,
$opt_noepoll, $opt_nokqueue, $opt_disablerpath, $opt_ipv6, $opt_ipv6links,
$opt_noipv6links, $opt_ident, $opt_quit, $opt_topic, $opt_maxbuf, $opt_kick,
$opt_gecos, $opt_away, $opt_modes, $opt_disable_debug, $opt_maxchans,
'disable-interactive' => \$opt_nointeractive,
'with-nick-length=i' => \$opt_nick_length,
'with-channel-length=i' => \$opt_chan_length,
- 'with-max-clients=i' => \$opt_maxclients,
'enable-ports' => \$opt_ports,
'enable-epoll' => \$opt_epoll,
'enable-kqueue' => \$opt_kqueue,
(defined $opt_away) ||
(defined $opt_gecos) ||
(defined $opt_kick) ||
- (defined $opt_maxclients) ||
(defined $opt_modes) ||
(defined $opt_topic) ||
(defined $opt_quit) ||
{
$config{SUPPORT_IP6LINKS} = "n";
}
-chomp($config{MAX_CLIENT_T} = `sh -c \"ulimit -n\"`); # FD Limit
-chomp($config{MAX_DESCRIPTORS} = `sh -c \"ulimit -n\"`); # Hard FD Limit
chomp($config{GCCVER} = `g++ -dumpversion | cut -c 1`); # Major GCC Version
$config{_SOMAXCONN} = SOMAXCONN; # Max connections in accept queue
$config{OSNAME} = $^O; # Operating System Name
exit;
}
-our $fd_scan_fail = "";
-if (!$config{MAX_CLIENT_T}) {
- $config{MAX_CLIENT_T} = 1024; # Set a reasonable 'Default'
- $fd_scan_fail = "true"; # Used Later
-}
-
# Get and Set some important vars..
getmodules();
open(FH,"<.svn/entries") or $fail = 1;
if ($fail) {
print "This is not an SVN copy of InspIRCd.\n";
- exit;
+ exit 1;
}
else
{
close(FH);
}
- system("svn update");
- system("perl configure -update");
+ open my $fd, "-|", "svn update";
+ my $configurechanged = 0; # Needs ./configure -update
+ my $coredirchanged = 0; # Needs ./configure -update
+ my $moduledirchanged = 0; # Needs ./configure -modupdate
+ my $rootincchanged = 0;
+ my @conflicted = ();
+ while (defined(my $line = <$fd>))
+ {
+ my ($action, $file);
+ print $line;
+ $line =~ m/^([ADUCG])\s+(.*)$/ or next;
+ ($action, $file) = ($1, $2);
+ if ($action eq "C")
+ {
+ push @conflicted, $file;
+ if ($file eq "configure")
+ {
+ $configurechanged = 1;
+ }
+ elsif ($file =~ m#^src/modules#)
+ {
+ $moduledirchanged = 1;
+ }
+ elsif ($file =~ m#^src/#)
+ {
+ $coredirchanged = 1;
+ }
+ elsif ($file =~ m/^\..*\.inc$/)
+ {
+ $rootincchanged = 1;
+ }
+ }
+ elsif ($action eq "U" || $action eq "G")
+ {
+ if ($file eq "configure")
+ {
+ $configurechanged = 1;
+ }
+ elsif ($file =~ m/^\..*\.inc$/)
+ {
+ $rootincchanged = 1;
+ }
+ }
+ elsif ($action eq "A" || $action eq "D")
+ {
+ if ($file =~ m#^src/modules#)
+ {
+ $moduledirchanged = 1;
+ }
+ elsif ($file =~ m#^src/#)
+ {
+ $coredirchanged = 1;
+ }
+ }
+ }
+ unless (close $fd) # close() waits for exit and returns false if the command failed
+ {
+ if ($! == 0)
+ {
+ print STDERR "Problem updating from SVN, please check above for errors\n";
+ }
+ else
+ {
+ print STDERR "Failed to run SVN: $!\n";
+ }
+ exit 1;
+ }
+ if (scalar(@conflicted) > 0)
+ {
+ print STDERR "\e[0;33;1mERROR:\e[0m You have local modifications which conflicted with the updates from SVN\n";
+ printf STDERR "Configure is not able to complete the update. Please resolve these conflicts, then run ./configure -%supdate\n", (($coredirchanged || $configurechanged) ? "" : "mod");
+ print "Conflicted files: " . join ", ", @conflicted . "\n";
+ exit 1;
+ }
+ if ($configurechanged || $coredirchanged)
+ {
+ system("perl configure -update");
+ }
+ elsif ($moduledirchanged || $rootincchanged)
+ {
+ system("perl configure -modupdate");
+ }
+ else
+ {
+ print "No need to update Makefiles.\n";
+ }
if (defined $opt_rebuild) {
system("make install");
}
print "Checking operating system version... ";
print getosflags() . "\n";
-if (defined $opt_maxclients)
-{
- $config{MAX_CLIENT} = $opt_maxclients;
-}
-
-if (!$config{MAX_CLIENT}) {
- # If the cache hasn't set the max clients, copy the variable of MAX_CLIENT_T, this
- # allows us to keep _T for testing purposes. (ie. "Are you sure you want to go
- # higher than the found value" :))
- $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
-}
-
printf "Checking if stdint.h exists... ";
$config{HAS_STDINT} = "true";
our $fail = 0;
dir, otherwise you won't have a config file!
Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
-Maximum file descriptors: \e[1;32m$config{MAX_CLIENT_T}\e[0m
Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
STOP
if ($rev eq "r0") {
print "of the 'maximum number of clients' setting which may be different on\n";
print "different servers on the network.\n\n";
- # File Descriptor Settings..
- promptnumeric("number of clients at any one time", "MAX_CLIENT_T");
- $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
- $config{MAX_DESCRIPTORS} = $config{MAX_CLIENT_T};
-
promptnumeric("length of nicknames", "NICK_LENGT");
promptnumeric("length of channel names", "CHAN_LENGT");
promptnumeric("number of mode changes in one line", "MAXI_MODES");
print "\n\n";
print "To build your server with these settings, please type '\e[1;32m$config{MAKEPROG}\e[0m' now.\n";
if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
- print "Please remember that to enable \e[1;32mSSL support\e[0m you must\n";
- print "load the required modules in your config. This configure process\n";
- print "has just prepared these modules to be compiled for you, and has not\n";
- print "configured them to be compiled into the core of the ircd.\n";
+ print "Please note: for \e[1;32mSSL support\e[0m you will need to load required\n";
+ print "modules in your config. This configure script has added those modules to the\n";
+ print "build process. For more info please refer to:\n";
+ print "\e[1;32mhttp://www.inspircd.org/wiki/Installation_From_Tarball\e[0m\n";
}
print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n\n";
if (($config{OSNAME} eq "OpenBSD") && ($config{CC} ne "eg++")) {
# Beware: Linux sets it's own cflags below for some retarded reason
$config{LDLIBS} = "-pthread -lstdc++";
- $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wall $config{OPTIMISATI}";
- $config{DEVELOPER} = "-fPIC -Woverloaded-virtual -Wshadow -Wall -g";
+ $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wformat=2 -Wmissing-format-attribute -Wall $config{OPTIMISATI}";
+ $config{DEVELOPER} = "-fPIC -Woverloaded-virtual -Wshadow -Wall -Wformat=2 -Wmissing-format-attribute -g";
$SHARED = "-Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared" unless defined $opt_disablerpath;
$config{MAKEPROG} = "make";
if ($config{OSNAME} =~ /Linux/i) {
$config{LDLIBS} = "-ldl -lstdc++ -pthread";
- $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wall $config{OPTIMISATI}";
+# $config{FLAGS} = "-fPIC -Woverloaded-virtual -Wshadow -Wall $config{OPTIMISATI}";
$config{FLAGS} .= " " . $ENV{CXXFLAGS} if exists($ENV{CXXFLAGS});
$config{LDLIBS} .= " " . $ENV{LDLIBS} if exists($ENV{LDLIBS});
$config{MAKEPROG} = "make";
#define MOD_PATH "$config{MODULE_DIR}"
#define VERSION "$version"
#define REVISION "$revision2"
-#define MAXCLIENTS $config{MAX_CLIENT}
-#define MAXCLIENTS_S "$config{MAX_CLIENT}"
#define SOMAXCONN_S "$config{_SOMAXCONN}"
-#define MAX_DESCRIPTORS $config{MAX_DESCRIPTORS}
#define NICKMAX $NL
#define CHANMAX $CL
#define MAXMODES $config{MAXI_MODES}
#define OPTIMISATION $config{OPTIMITEMP}
#define LIBRARYDIR "$config{LIBRARY_DIR}"
#define SYSTEM "$incos"
+
EOF
print FILEHANDLE "#define MAXBUF " . ($config{MAXBUF}+2) . "\n";
print FILEHANDLE "#define USE_SELECT\n";
$se = "socketengine_select";
}
- print FILEHANDLE "\n#endif\n";
+ print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n\n#endif\n";
close(FILEHANDLE);
}
my $all = "all: ";
my $all_libsonly = "";
-
my $libraryext = "";
my $othercrap = "";
my $RPATH = "";
foreach my $cmd (@cmdlist) {
print FH <<ITEM;
cmd_$cmd.so: cmd_$cmd.cpp ../../include/base.h ../../include/modules.h ../../include/inspircd.h ../../include/channels.h ../../include/users.h ../../include/globals.h ../../include/inspircd_config.h ../../include/commands/cmd_$cmd.h
- \@../../make/run-cc.pl \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
- \@../../make/run-cc.pl \$(CC) -pipe $SHARED -o cmd_$cmd.so cmd_$cmd.o
+ \@../../make/run-cc.pl \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic $SHARED -o cmd_$cmd.so cmd_$cmd.cpp
ITEM
}
-#try build a .so, no intermediate .o
-# @../../make/run-cc.pl \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic $SHARED -o cmd_$cmd.so
-
-#this works for sure
-# @../../make/run-cc.pl \$(CC) -pipe -I../../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
-# @../../make/run-cc.pl \$(CC) -pipe $SHARED -o cmd_$cmd.so cmd_$cmd.o
}
# Routine to list out the extra/ modules that have been enabled.