###################################################
# InspIRCd Configuration Script
#
-# Copyright 2002-2007 The InspIRCd Development Team
+# Copyright 2002-2008 The InspIRCd Development Team
# http://www.inspircd.org/wiki/index.php/Credits
#
# Licensed under GPL, please see the COPYING file
our %extrasources = ();
-our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_nick_length,
- $opt_chan_length, $opt_maxclients, $opt_ports, $opt_epoll, $opt_kqueue, $opt_noports,
- $opt_noepoll, $opt_nokqueue, $opt_disablerpath, $opt_ipv6, $opt_ipv6links,
- $opt_noipv6links, $opt_ident, $opt_quit, $opt_topic, $opt_maxbuf, $opt_kick,
- $opt_gecos, $opt_away, $opt_modes, $opt_disable_debug, $opt_maxchans,
- $opt_opermaxchans);
+our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_ports,
+ $opt_epoll, $opt_kqueue, $opt_noports, $opt_noepoll, $opt_nokqueue, $opt_disablerpath,
+ $opt_ipv6, $opt_ipv6links, $opt_noipv6links, $opt_maxbuf, $opt_disable_debug,
+ $opt_freebsd_port);
our ($opt_cc, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir,
$opt_library_dir);
'rebuild' => \$opt_rebuild,
'enable-openssl' => \$opt_use_openssl,
'disable-interactive' => \$opt_nointeractive,
- 'with-nick-length=i' => \$opt_nick_length,
- 'with-channel-length=i' => \$opt_chan_length,
- 'with-max-clients=i' => \$opt_maxclients,
'enable-ports' => \$opt_ports,
'enable-epoll' => \$opt_epoll,
'enable-kqueue' => \$opt_kqueue,
'enable-remote-ipv6' => \$opt_ipv6links,
'disable-remote-ipv6' => \$opt_noipv6links,
'with-cc=s' => \$opt_cc,
- 'with-ident-length=i' => \$opt_ident,
- 'with-quit-length=i' => \$opt_quit,
- 'with-topic-length=i' => \$opt_topic,
'with-maxbuf=i' => \$opt_maxbuf,
- 'with-kick-length=i' => \$opt_kick,
- 'with-gecos-length=i' => \$opt_gecos,
- 'with-away-length=i' => \$opt_away,
- 'with-max-modes=i' => \$opt_modes,
+ 'enable-freebsd-ports-openssl' => \$opt_freebsd_port,
'prefix=s' => \$opt_base_dir,
'config-dir=s' => \$opt_config_dir,
'module-dir=s' => \$opt_module_dir,
(defined $opt_base_dir) ||
(defined $opt_binary_dir) ||
(defined $opt_nointeractive) ||
- (defined $opt_away) ||
- (defined $opt_gecos) ||
- (defined $opt_kick) ||
- (defined $opt_maxclients) ||
- (defined $opt_modes) ||
- (defined $opt_topic) ||
- (defined $opt_quit) ||
- (defined $opt_ident) ||
(defined $opt_cc) ||
(defined $opt_ipv6) ||
(defined $opt_ipv6links) ||
(defined $opt_kqueue) ||
(defined $opt_epoll) ||
(defined $opt_ports) ||
- (defined $opt_maxchans) ||
- (defined $opt_opermaxchans) ||
- (defined $opt_chan_length) ||
- (defined $opt_nick_length) ||
(defined $opt_use_openssl) ||
(defined $opt_nokqueue) ||
(defined $opt_noepoll) ||
(defined $opt_noports) ||
(defined $opt_maxbuf) ||
- (defined $opt_use_gnutls)
+ (defined $opt_use_gnutls) ||
+ (defined $opt_freebsd_port)
);
our $interactive = !$non_interactive;
$config{LIBRARY_DIR} = $opt_library_dir;
}
chomp($config{HAS_GNUTLS} = `libgnutls-config --version 2>/dev/null | cut -c 1,2,3`); # GNUTLS Version.
-chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version
+
+if (defined $opt_freebsd_port)
+{
+ chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`);
+ chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`);
+ $config{USE_FREEBSD_BASE_SSL} = "n";
+}
+else
+{
+ if ($^O eq "freebsd")
+ {
+ # default: use base ssl
+ chomp($config{HAS_OPENSSL} = `openssl version | cut -d ' ' -f 2`); # OpenSSL version, freebsd specific
+ chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`); # Port version, may be different
+ }
+ else
+ {
+ chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version, others
+ $config{HAS_OPENSSL_PORT} = "";
+ }
+}
+
chomp(our $gnutls_ver = $config{HAS_GNUTLS});
chomp(our $openssl_ver = $config{HAS_OPENSSL});
$config{USE_GNUTLS} = "n";
$config{OPTIMISATI} = "-O2"; # DEBUGGING OFF!
}
-$config{NICK_LENGT} = "31"; # Default Nick Length
-if (defined $opt_nick_length)
-{
- $config{NICK_LENGT} = $opt_nick_length;
-}
-$config{CHAN_LENGT} = "64"; # Default Channel Name Length
-if (defined $opt_chan_length)
-{
- $config{CHAN_LENGT} = $opt_chan_length;
-}
-$config{MAXI_MODES} = "20"; # Default Max. Number of Modes set at once.
-if (defined $opt_modes)
-{
- $config{MAXI_MODES} = $opt_modes;
-}
$config{HAS_STRLCPY} = "false"; # strlcpy Check.
$config{HAS_STDINT} = "false"; # stdint.h check
$config{USE_KQUEUE} = "y"; # kqueue enabled
{
$config{SUPPORT_IP6LINKS} = "n";
}
-chomp($config{MAX_CLIENT_T} = `sh -c \"ulimit -n\"`); # FD Limit
-chomp($config{MAX_DESCRIPTORS} = `sh -c \"ulimit -n\"`); # Hard FD Limit
chomp($config{GCCVER} = `g++ -dumpversion | cut -c 1`); # Major GCC Version
+chomp($config{GCCMINOR} = `g++ -dumpversion | cut -c 3`);
$config{_SOMAXCONN} = SOMAXCONN; # Max connections in accept queue
$config{OSNAME} = $^O; # Operating System Name
$config{IS_DARWIN} = "NO"; # Is OSX?
}
our $exec = $config{CC} . " -dumpversion | cut -c 1";
chomp($config{GCCVER} = `$exec`); # Major GCC Version
+$exec = $config{CC} . " -dumpversion | cut -c 3";
+chomp($config{GCCMINOR} = `$exec`);
$config{MAKEORDER} = "ircd mods"; # build order
-$config{MAX_IDENT} = "12"; # max ident size
-$config{MAX_QUIT} = "255"; # max quit message size
-$config{MAX_TOPIC} = "307"; # max topic size
-$config{MAX_KICK} = "255"; # max kick message size
-$config{MAX_GECOS} = "128"; # max GECOS size
-$config{MAX_AWAY} = "200"; # max AWAY size
$config{MAXBUF} = "512"; # Max buffer size
-if (defined $opt_ident)
-{
- $config{MAX_IDENT} = $opt_ident;
-}
-if (defined $opt_quit)
-{
- $config{MAX_QUIT} = $opt_quit;
-}
-if (defined $opt_topic)
-{
- $config{MAX_TOPIC} = $opt_topic;
-}
-if (defined $opt_kick)
-{
- $config{MAX_KICK} = $opt_kick;
-}
-if (defined $opt_gecos)
-{
- $config{MAX_GECOS} = $opt_gecos;
-}
-if (defined $opt_away)
-{
- $config{MAX_AWAY} = $opt_away;
-}
if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)([a-z])?(\-[a-z][0-9])?$/) {
$config{HAS_OPENSSL} = $1;
$config{HAS_OPENSSL} = "";
}
-if ($config{GCCVER} eq "") {
+if (($config{GCCVER} eq "") || ($config{GCCMINOR} eq "")) {
print $config{CC} . " was not found! You require g++ (the GNU C++ compiler, part of GCC) to build InspIRCd!\n";
exit;
}
-our $fd_scan_fail = "";
-if (!$config{MAX_CLIENT_T}) {
- $config{MAX_CLIENT_T} = 1024; # Set a reasonable 'Default'
- $fd_scan_fail = "true"; # Used Later
-}
-
# Get and Set some important vars..
getmodules();
print "Checking operating system version... ";
print getosflags() . "\n";
-if (defined $opt_maxclients)
-{
- $config{MAX_CLIENT} = $opt_maxclients;
-}
-
-if (!$config{MAX_CLIENT}) {
- # If the cache hasn't set the max clients, copy the variable of MAX_CLIENT_T, this
- # allows us to keep _T for testing purposes. (ie. "Are you sure you want to go
- # higher than the found value" :))
- $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
-}
-
printf "Checking if stdint.h exists... ";
$config{HAS_STDINT} = "true";
our $fail = 0;
dir, otherwise you won't have a config file!
Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
-Maximum file descriptors: \e[1;32m$config{MAX_CLIENT_T}\e[0m
Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
STOP
if ($rev eq "r0") {
print ".\n\n";
$config{CHANGE_COMPILER} = "n";
- print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.x\e[0m)\n";
+ print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
print "\e[1;32mIMPORTANT!\e[0m A GCC 2.x compiler has been detected, and
chomp(my $foo = `$config{CC} -dumpversion | cut -c 1`);
if ($foo ne "") {
chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
- print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.x\e[0m)\n";
+ chomp($config{GCCMINOR} = `$config{CC} -dumpversion | cut -c 3`);
+ print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
if ($config{GCCVER} < 3) {
print "\e[1;32mGCC 2.x WILL NOT WORK!\e[0m. Let's try that again, shall we?\n";
}
print "You have chosen to build an \e[1;32mIPV6-enabled\e[0m server.\nTo accept IPV4 users, you can still use IPV4 addresses\nin your port bindings..\n\n";
$config{SUPPORT_IP6LINKS} = "y";
} else {
- yesno('SUPPORT_IP6LINKS',"You have chosen to build an \e[1;32mIPV4-only\e[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers?\nIf you are using a recent operating\nsystem and are unsure, answer yes.\nIf you answer 'no' here, your InspIRCd server will be unable\nto parse IPV6 addresses (e.g. for CIDR bans)");
+ yesno('SUPPORT_IP6LINKS',"You have chosen to build an \e[1;32mIPV4-only\e[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers? If you are using a recent operating system and are\nunsure, answer yes. If you answer 'no' here, your InspIRCd server will\nbe unable to parse IPV6 addresses (e.g. for CIDR bans)\n\nEnable linking to servers which have IPV6 enabled?");
+ print "\n";
+ }
+
+ $config{USE_FREEBSD_BASE_SSL} = "n";
+ $config{USE_FREEBSD_PORTS_SSL} = "n";
+ if ($config{HAS_OPENSSL_PORT} ne "")
+ {
+ $config{USE_FREEBSD_PORTS_SSL} = "y";
+ print "I have detected the OpenSSL FreeBSD port installed on your system,\n";
+ print "version \e[1;32m".$config{HAS_OPENSSL_PORT}."\e[0m. Your base system OpenSSL is version \e[1;32m".$openssl_ver."\e[0m.\n\n";
+ yesno('USE_FREEBSD_PORTS_SSL', "Do you want to use the FreeBSD ports version?");
print "\n";
+ $config{USE_FREEBSD_BASE_SSL} = "y" if ($config{USE_FREEBSD_PORTS_SSL} eq "n");
+
+ if ($config{USE_FREEBSD_BASE_SSL} eq "n")
+ {
+ # update to port version
+ $openssl_ver = $config{HAS_OPENSSL_PORT};
+ }
+ }
+ else
+ {
+ $config{USE_FREEBSD_BASE_SSL} = "y" if ($^O eq "freebsd");
}
if (($config{HAS_GNUTLS} eq "y") && ($config{HAS_OPENSSL} eq "y")) {
else {
print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed if\nyou intend to use OpenSSL, or that GnuTLS is in your path if you intend\nto use GnuTLS.\n\n";
}
-
- print "\nThe following questions will ask you for various figures relating\n";
- print "To your IRCd install. Please note that these should usually be left\n";
- print "as defaults unless you have a real reason to change them. If they\n";
- print "changed, then the values must be identical on all servers on your\n";
- print "network, or malfunctions and/or crashes may occur, with the exception\n";
- print "of the 'maximum number of clients' setting which may be different on\n";
- print "different servers on the network.\n\n";
-
- # File Descriptor Settings..
- promptnumeric("number of clients at any one time", "MAX_CLIENT_T");
- $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
- $config{MAX_DESCRIPTORS} = $config{MAX_CLIENT_T};
-
- promptnumeric("length of nicknames", "NICK_LENGT");
- promptnumeric("length of channel names", "CHAN_LENGT");
- promptnumeric("number of mode changes in one line", "MAXI_MODES");
- promptnumeric("length of an ident (username)", "MAX_IDENT");
- promptnumeric("length of a quit message", "MAX_QUIT");
- promptnumeric("length of a channel topic", "MAX_TOPIC");
- promptnumeric("length of a kick message", "MAX_KICK");
- promptnumeric("length of a GECOS (real name)", "MAX_GECOS");
- promptnumeric("length of an away message", "MAX_AWAY");
}
dumphash();
if ($foo ne "") {
$config{CC} = "eg++";
chomp($config{GCCVER} = `eg++ -dumpversion | cut -c 1`); # we must redo these if we change the compiler path
+ chomp($config{GCCMINOR} = `eg++ -dumpversion | cut -c 3`);
}
return "OpenBSD";
}
{
print "Writing \e[1;32minspircd_config.h\e[0m\n";
open(FILEHANDLE, ">include/inspircd_config.h");
- my $NL = $config{NICK_LENGT}+1;
- my $CL = $config{CHAN_LENGT}+1;
print FILEHANDLE <<EOF;
/* Auto generated by configure, do not modify! */
#ifndef __CONFIGURATION_AUTO__
#define MOD_PATH "$config{MODULE_DIR}"
#define VERSION "$version"
#define REVISION "$revision2"
-#define MAXCLIENTS $config{MAX_CLIENT}
-#define MAXCLIENTS_S "$config{MAX_CLIENT}"
#define SOMAXCONN_S "$config{_SOMAXCONN}"
-#define MAX_DESCRIPTORS $config{MAX_DESCRIPTORS}
-#define NICKMAX $NL
-#define CHANMAX $CL
-#define MAXMODES $config{MAXI_MODES}
-#define IDENTMAX $config{MAX_IDENT}
-#define MAXQUIT $config{MAX_QUIT}
-#define MAXTOPIC $config{MAX_TOPIC}
-#define MAXKICK $config{MAX_KICK}
-#define MAXGECOS $config{MAX_GECOS}
-#define MAXAWAY $config{MAX_AWAY}
#define OPTIMISATION $config{OPTIMITEMP}
#define LIBRARYDIR "$config{LIBRARY_DIR}"
#define SYSTEM "$incos"
if ($config{GCCVER} >= 3) {
print FILEHANDLE "#define GCC3\n";
}
+ if (
+ (($config{GCCVER} == 4) && ($config{GCCMINOR} >= 3))
+ ||
+ ($config{GCCVER} > 4)
+ ) {
+ print FILEHANDLE "#define HASHMAP_DEPRECATED\n";
+ }
if ($config{HAS_STRLCPY} eq "true") {
print FILEHANDLE "#define HAS_STRLCPY\n";
}
chomp($modules); # Remove Redundant whitespace..
opendir(DIRHANDLE, "src/modules");
- foreach my $name (sort readdir(DIRHANDLE)) {
- if ($name =~ /^m_(.+?)$/) {
- if (defined(opendir(MDIRHANDLE, "src/modules/$name"))) {
+ foreach my $name2 (sort readdir(DIRHANDLE)) {
+ if ($name2 =~ /^m_(.+?)$/) {
+ if (defined(opendir(MDIRHANDLE, "src/modules/$name2"))) {
closedir(MDIRHANDLE);
- $modules .= "$name.so ";
- $uninstall_list = $uninstall_list . " -rm \$(MODULES)/$name.so\n";
+ $modules .= "$name2.so ";
+ $uninstall_list = $uninstall_list . " -rm \$(MODULES)/$name2.so\n";
}
}
}
projects / user / henk / code / inspircd.git / blobdiff