-#!/bin/sh
+#!/usr/bin/perl
+
# InspIRCd Configuration Script
#
# Copyright 2003 The ChatSpike Development Team
# <brain@chatspike.net>
# <Craig@chatspike.net>
#
-# $Id$
+# [14:21] Brain: <matrix impression> i know perl-fu!
#
+# $Id$
#
########################################
-echo "Configuring default values..."
-
-ME=`pwd`
-GCCVER=`gcc -dumpversion | cut -c 1`
-GCC34=`gcc -dumpversion | cut -c 3`
-CONFIG_DIR=$ME/conf
-MODULE_DIR=$ME/modules
-BINARY_DIR=$ME/bin
-INSTALL=`which install`
-OPTIMITEMP=0
-OPTIMISATI="-g"
-MAX_CLIENT_T=`ulimit -n`
-NICK_LENGT=32
-CHAN_LENGT=64
-MAX_CHANNE=20
-MAXI_MODES=20
-OSNAME=`(uname -s) 2>/dev/null` || OSNAME="unknown"
-
-if [ -z $MAX_CLIENT_T ] ; then
- MAX_CLIENT_T=1024
- SCAN_FAILED=1
-fi
-
-
-if [ "$1" = "-clean" -o "$2" = "-clean" ] ; then
- `rm -rf .config.cache`
-fi
-
-if [ -e ".config.cache" -a -z "$CLEAN" ] ; then
- . .config.cache
-fi
-
-if [ "$1" = "-update" -o "$2" = "-update" ] ; then
- # They wanna update their Makefile.. good for 'em
- # Make sure .config.cache exists
- if [ ! -e ".config.cache" ] ; then
- echo "You have not run ./configure before. Please do this before trying to run the update script."
- exit 0
- fi
- # Right, load the cache values
- . .config.cache
- # Check for modules
-
- case "$OSNAME" in
- FreeBSD)
- LDLIBS="-Ldl"
- FLAGS="-fPIC -frtti $OPTIMISATI"
- MAKEPROG="gmake"
- ;;
- *)
- LDLIBS="-ldl"
- FLAGS="-fPIC -frtti $OPTIMISATI"
- MAKEPROG="make"
- ;;
- esac
-
- MODULES=""
- for module in src/modules/*.cpp ; do
- mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
- MODULES="$MODULES $mod"
- done
-
- # Write the new makefile.
- for file in Makefile; do
- echo -e "\033[0;37mWriting \033[1;32m$file\033[0;37m"
- rm -f $file
- sed -e "
- s%@MAKEPROG@%$MAKEPROG%g
- s%@FLAGS@%$FLAGS%g
- s%@LDLIBS@%$LDLIBS%g
- s%@CONFIG_DIR@%$CONFIG_DIR%g
- s%@MODULE_DIR@%$MODULE_DIR%g
- s%@BINARY_DIR@%$BINARY_DIR%g
- s%@MODULES@%$MODULES%g
- " .${file}.inc >> $file
- done
- echo -e "\033[0;37mWriting \033[1;32msrc/modules/Makefile\033[0;37m"
- rm -f src/modules/Makefile
-
- # Generate the Header..
-
- echo "# (C) ChatSpike development team" >> src/modules/Makefile
- echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
- echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
- echo "# for assisting with making this work right." >> src/modules/Makefile
- echo "#" >> src/modules/Makefile
- echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
- echo "# please run ./configure --update" >> src/modules/Makefile
- echo "" >> src/modules/Makefile
- echo "all: \$(MODULES)" >> src/modules/Makefile
- echo "" >> src/modules/Makefile
-
-
- for module in src/modules/*.cpp ; do
- flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
- mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
- mod2=`echo $module | sed 's/src\/modules\///'`
- echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
- echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
- echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
- echo "" >> src/modules/Makefile
- done
-
-
- echo "Complete."
- exit 1;
-fi
-
-
-if [ -z $MAX_CLIENT ] ; then
- MAX_CLIENT=$MAX_CLIENT_T
-fi
-
-
-c=""
-n=""
-if [ "`eval echo -e -n 'a'`" = "-n a" ] ; then
- c="\c"
-else
- n="-n"
-fi
-
-exists () { # because some shells don't have test -e
- if [ -f $1 -o -d $1 -o -p $1 -o -c $1 -o -b $1 ] ; then
- return 0
- else
- return 1
- fi
-}
-
-echo "#include <string.h>">.test.cpp
-echo "#include <stdio.h>">>.test.cpp
-echo "int main() { char a[10]; char b[10]; strlcpy(a,b,10); printf(\"%d\\n\",999); }" >>.test.cpp
-g++ -o .test .test.cpp 2>&1
-HAS_STRLCPY=`./.test 2>&1`
-rm -f .test.cpp .test
-
-clear
-echo -e "'\033[1;33m####\033[0;37m:'\033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m::'\033[1;33m######\033[0;37m::'\033[1;33m########\033[0;37m::'\033[1;33m####\033[0;37m:'\033[1;33m########\033[0;37m:::'\033[1;33m######\033[0;37m::'\033[1;33m########\033[0;37m::"
-echo -e ". \033[1;33m##\033[0;37m:: \033[1;33m###\033[0;37m:: \033[1;33m##\033[0;37m:'\033[1;33m##\033[0;37m... \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m.... \033[1;33m##\033[0;37m:. \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m.... \033[1;33m##\033[0;37m:'\033[1;33m##\033[0;37m... \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m.... \033[1;33m##\033[0;37m:"
-echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m####\033[0;37m: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m:::..:: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m:::..:: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
-echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m \033[1;33m##\033[0;37m \033[1;33m##\033[0;37m:. \033[1;33m######\033[0;37m:: \033[1;33m########\033[0;37m::: \033[1;33m##\033[0;37m:: \033[1;33m########\033[0;37m:: \033[1;33m##\033[0;37m::::::: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
-echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m. \033[1;33m####\033[0;37m::..... \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m.....:::: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m.. \033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m::::::: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
-echo -e ": \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m:. \033[1;33m###\033[0;37m:'\033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m::::::::: \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m::. \033[1;33m##\033[0;37m:: \033[1;33m##\033[0;37m::: \033[1;33m##\033[0;37m: \033[1;33m##\033[0;37m:::: \033[1;33m##\033[0;37m:"
-echo -e "'\033[1;33m####\033[0;37m: \033[1;33m##\033[0;37m::. \033[1;33m##\033[0;37m:. \033[1;33m######\033[0;37m:: \033[1;33m##\033[0;37m::::::::'\033[1;33m####\033[0;37m: \033[1;33m##\033[0;37m:::. \033[1;33m##\033[0;37m:. \033[1;33m######\033[0;37m:: \033[1;33m########\033[0;37m::"
-echo -e "\033[0;37m\033[0;37m....::..::::..:::......:::..:::::::::....::..:::::..:::......:::........:::"
-echo ""
-echo -e "\033[1;37mWelcome to the InspIRCd Configuration program!"
-echo ""
-echo "*** If you are unsure of any of these values, leave it blank for ***"
-echo "*** standard settings that will work, and your server will run ***"
-echo "*** using them. If you are running this server as part of a ***"
-echo "*** larger network, you must consult with your network admins ***"
-echo "*** for the proper values to use, or server links will be unstable! ***"
-echo -e "\033[0;37m"
-echo -e "Press \033[1;37m<RETURN>\033[0;37m to accept the default for any option, or enter"
-echo -e "a new value. Please note: You will \033[1;37mHAVE\033[0;37m to read the docs"
-echo -e "dir, otherwise you won't have a config file!"
-echo ""
-echo -e "Your operating system is: \033[1;37m$OSNAME\033[0;37m (`uname -mnr`), fdmax: $MAX_CLIENT_T"
-echo ""
-
-#############################################################################
-
- ok=0
- asked=1
- echo "In what directory are the configuration files?"
- while [ $ok -eq 0 ] ; do
- echo -e $n "[\033[1;32m$CONFIG_DIR\033[0;37m] -> $c"
- if read INPUT ; then : ; else echo "" ; exit 1 ; fi
- if [ ! "$INPUT" ] ; then
- INPUT=$CONFIG_DIR
- default=1
- fi
- if echo "$INPUT" | grep -q \[\'\"\\\] ; then
- echo 'Please use a pathname without the characters: '\'' " \'
- elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
- if exists "$INPUT" ; then
- echo "$INPUT exists, but is not a directory!"
- else
- echo "$INPUT does not exist. Create it?"
- echo -e $n "[\033[1;32my\033[0;37m] $c"
- read YN
- if [ "$YN" != "n" ] ; then
- if mkdir -p "$INPUT" ; then
- ok=1
- fi
- fi
- fi
- else
- ok=1
- fi
- done
- CONFIG_DIR=$INPUT
- echo ""
-
-
-##############################################################################
-
- ok=0
- asked=1
- echo "In What directory are the modules to be compiled to?"
- while [ $ok -eq 0 ] ; do
- echo -e $n "[\033[1;32m$MODULE_DIR\033[0;37m] -> $c"
- if read INPUT ; then : ; else echo "" ; exit 1 ; fi
- if [ ! "$INPUT" ] ; then
- INPUT=$MODULE_DIR
- default=1
- fi
- if echo "$INPUT" | grep -q \[\'\"\\\] ; then
- echo 'Please use a pathname without the characters: '\'' " \'
- elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
- if exists "$INPUT" ; then
- echo "$INPUT exists, but is not a directory!"
- else
- echo "$INPUT does not exist. Create it?"
- echo -e $n "[\033[1;32my\033[0;37m] $c"
- read YN
- if [ "$YN" != "n" ] ; then
- if mkdir -p "$INPUT" ; then
- ok=1
- fi
- fi
- fi
- else
- ok=1
- fi
- done
- MODULE_DIR=$INPUT
- echo ""
-
-
-##############################################################################
-
- ok=0
- asked=1
- echo "In what directory is the IRCd binary to be placed?"
- while [ $ok -eq 0 ] ; do
- echo -e $n "[\033[1;32m$BINARY_DIR\033[0;37m] -> $c"
- if read INPUT ; then : ; else echo "" ; exit 1 ; fi
- if [ ! "$INPUT" ] ; then
- INPUT=$BINARY_DIR
- default=1
- fi
- if echo "$INPUT" | grep -q \[\'\"\\\] ; then
- echo 'Please use a pathname without the characters: '\'' " \'
- elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
- if exists "$INPUT" ; then
- echo "$INPUT exists, but is not a directory!"
- else
- echo "$INPUT does not exist. Create it?"
- echo -e $n "[\033[1;32my\033[0;37m] $c"
- read YN
- if [ "$YN" != "n" ] ; then
- if mkdir -p "$INPUT" ; then
- ok=1
- fi
- fi
- fi
- else
- ok=1
- fi
- done
- BINARY_DIR=$INPUT
- echo ""
-
-###############################################################################
-# Craigs Version 3 With slightly less Cheeze :p
-
-cheeze=0
-echo -e "Maximum number of clients at any one time (\033[1;32m1-$MAX_CLIENT_T\033[0;37m)?"
-while [ "$cheeze" -eq "0" ] ; do
- echo -e $n "[\033[1;32m$MAX_CLIENT\033[0;37m] -> $c"
- read cc
-
- if [ -z "$cc" ] ; then
- cc=$MAX_CLIENT
- fi
-
- case "$cc" in
- [0-9]*)
- if [ "$cc" -gt "$MAX_CLIENT_T" -a -z "$SCAN_FAILED" ] ; then
- echo -e "WARNING: Our scans have indicated that you are attempting"
- echo -e "to use more sockets than there are avaliable. Are you sure"
- echo -e "you wish to do this? It may cause the IRCd to malfunction [y/n]"
- echo -e $n "[\033[1;32mn\033[0;37m] -> $c"
- read YN
- if [ "$YN" = "y" ] ; then
- MAX_CLIENT=$cc
- cheeze=1
- else
- echo ""
- echo -e "Please enter the correct value (\033[1;32m1-$MAX_CLIENT_T\033[0;37m)"
- fi
- else
- echo $SCAN_FAILED
- cheeze=1
- MAX_CLIENT=$cc
- fi
- ;;
- *)
- echo ""
- echo "You must enter a number in this field. Please try again."
- ;;
- esac
-done
-echo ""
-
-
-###############################################################################
-
- cheeze=0
- echo -e "What is the Maximum length of nicknames?"
- while [ "$cheeze" -eq "0" ] ; do
- echo -e $n "[\033[1;32m$NICK_LENGT\033[0;37m] -> $c"
- read cc
- if [ "$cc" ] ; then
- case "$cc" in
- [0-9]*)
- NICK_LENGT=$cc
- cheeze=1
- ;;
- *)
- echo ""
- echo "You Must Enter a Number in this field. Please Try Again."
- cheeze=0
- ;;
- esac
- else
- cheeze=1
- fi
- done
- echo ""
-
-###############################################################################
-
- cheeze=0
- echo -e "What is the Maximum length of channel names?"
- while [ "$cheeze" -eq "0" ] ; do
- echo -e $n "[\033[1;32m$MAX_CHANNE\033[0;37m] -> $c"
- read cc
- if [ "$cc" ] ; then
- case "$cc" in
- [0-9]*)
- MAX_CHANNE=$cc
- cheeze=1
- ;;
- *)
- echo ""
- echo "You Must Enter a Number in this field. Please Try Again."
- cheeze=0
- ;;
- esac
- else
- cheeze=1
- fi
- done
- echo ""
-
-###############################################################################
-
- cheeze=0
- echo -e "What is the Maximum number of mode changes in one line?"
- while [ "$cheeze" -eq "0" ] ; do
- echo -e $n "[\033[1;32m$MAXI_MODES\033[0;37m] -> $c"
- read cc
- if [ "$cc" ] ; then
- case "$cc" in
- [0-9]*)
- MAXI_MODES=$cc
- cheeze=1
- ;;
- *)
- echo ""
- echo "You Must Enter a Number in this field. Please Try Again."
- cheeze=0
- ;;
- esac
- else
- cheeze=1
- fi
- done
- echo ""
-
-###############################################################################
-# Code Optimisation?
-
- cheeze=0
- echo -e "Enter the Level Of Binary optimisation. This is a number between 0 and 3 (inclusive)"
- echo -e "The InspIRCd Team will _NOT_ support any bug reports above 0."
- echo -e "Also note, the IRCd behaviour will be different depending on this value."
- echo -e "Please read the documentation for more information."
- echo -e ""
- echo -e "The Higher the number, the more optimised your binary will be. This value will default to 0"
- echo -e "If you either a) Dont enter a number, or b) Enter a value outside the range."
- echo -e $n "[\033[1;32m$OPTIMITEMP\033[0;37m] -> $c"
- read cc
- if [ -z "$cc" ] ; then
- cc=$OPTIMITEMP
- fi
- case "$cc" in
- 1)
- OPTIMITEMP=1
- OPTIMISATI="-O"
- ;;
- 2)
- OPTIMITEMP=2
- OPTIMISATI="-O2"
- ;;
- 3)
- OPTIMITEMP=3
- OPTIMISATI="-O3"
- ;;
- *)
- OPTIMITEMP=0
- OPTIMISATI="-g"
- ;;
- esac
- echo ""
-
-###############################################################################
-
-
-echo -e "\033[1;32mPre-build configuration is complete!\033[0;37m"
-echo ""
-echo -e "\033[0;37mConfig path:\033[1;32m\t\t\t$CONFIG_DIR"
-echo -e "\033[0;37mModule path:\033[1;32m\t\t\t$MODULE_DIR"
-echo -e "\033[0;37mMax connections:\033[1;32m\t\t$MAX_CLIENT"
-echo -e "\033[0;37mMax User Channels\033[1;32m\t\t$MAX_CHANNE"
-echo -e "\033[0;37mMax nickname length:\033[1;32m\t\t$NICK_LENGT"
-echo -e "\033[0;37mMax channel length:\033[1;32m\t\t$CHAN_LENGT"
-echo -e "\033[0;37mMax mode length:\033[1;32m\t\t$MAXI_MODES"
-echo -e "\033[0;37mGCC Version Found:\033[1;32m\t\t$GCCVER.$GCC34"
-echo -e "\033[0;37mOptimatizaton Flag:\033[1;32m\t\t$OPTIMISATI"
-echo -e "\033[0;37m"
-
-echo "Writing cache file for future ./configures ..."
-
-COPY_CONF=0
-if [ "$CONFIG_DIR" != "$ME/conf" ] ; then
- COPY_CONF=1
-fi
-
-
-if [ -e ".config.cache" ] ; then
- rm .config.cache
-fi
-echo "CONFIG_DIR=\"$CONFIG_DIR\"" >> .config.cache
-echo "MODULE_DIR=\"$MODULE_DIR\"" >> .config.cache
-echo "BINARY_DIR=\"$BINARY_DIR\"" >> .config.cache
-echo "MAX_CLIENT=\"$MAX_CLIENT\"" >> .config.cache
-echo "MAX_CHANNE=\"$MAX_CHANNE\"" >> .config.cache
-echo "NICK_LENGT=\"$NICK_LENGT\"" >> .config.cache
-echo "MAXI_MODES=\"$MAXI_MODES\"" >> .config.cache
-echo "OPTIMITEMP=\"$OPTIMITEMP\"" >> .config.cache
-echo "OPTIMISATI=\"$OPTIMISATI\"" >> .config.cache
-echo "GCC34=\"$GCC34\"" >> .config.cache
-echo "HAS_STRLCPY=\"$HAS_STRLCPY\"" >> .config.cache
-echo "COPY_CONF=\"$COPY_CONF\"" >> .config.cache
-
-echo -e "Writing \033[1;32minspircd_config.h"
-
-echo "/* Auto generated by configure, do not modify! */" >include/inspircd_config.h
-echo "" >>include/inspircd_config.h
-if [ "$GCCVER" -eq "3" ] ; then
-echo "#define GCC3" >>include/inspircd_config.h
- if [ "$GCC34" -gt "3" ] ; then
- echo "#define GCC34" >>include/inspircd_config.h
- fi
-fi
-if [ "$HAS_STRLCPY" -eq "999" ] ; then
- echo "#define HAS_STRLCPY" >>include/inspircd_config.h
-fi
-echo "#define SYSLOG_FACILITY LOG_DAEMON" >>include/inspircd_config.h
-echo "#define SYSLOG_LEVEL LOG_NOTICE" >>include/inspircd_config.h
-echo "#define CONFIG_FILE \"$CONFIG_DIR/inspircd.conf\"" >>include/inspircd_config.h
-echo "#define MOD_PATH \"$MODULE_DIR\"" >>include/inspircd_config.h
-echo "#define VERSION \"`sh ./src/version.sh`\"" >>include/inspircd_config.h
-echo "#define MAXCLIENTS $MAX_CLIENT" >>include/inspircd_config.h
-echo "#define NICKMAX $NICK_LENGT" >>include/inspircd_config.h
-echo "#define CHANMAX $CHAN_LENGT" >>include/inspircd_config.h
-echo "#define MAXCHANS $MAX_CHANNE" >>include/inspircd_config.h
-echo "#define MAXMODES $MAXI_MODES" >>include/inspircd_config.h
-echo "#define OPTIMISATION $OPTIMITEMP" >>include/inspircd_config.h
-echo "#define SYSTEM \"`uname -n -s -r`\"" >>include/inspircd_config.h
-echo "#define MAXBUF 514">>include/inspircd_config.h
-touch include/inspircd_config.h
-
-case "$OSNAME" in
- FreeBSD)
- LDLIBS="-Ldl"
- FLAGS="-fPIC -frtti $OPTIMISATI"
- MAKEPROG="gmake"
- ;;
- *)
- LDLIBS="-ldl"
- FLAGS="-fPIC -frtti $OPTIMISATI"
- MAKEPROG="make"
- ;;
-esac
-
-MODULES=""
-for module in src/modules/*.cpp ; do
- mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
- MODULES="$MODULES $mod"
-done
-
-for file in Makefile inspircd; do
- echo -e "\033[0;37mWriting \033[1;32m$file\033[0;37m"
- rm -f $file
- sed -e "
- s%@MAKEPROG@%$MAKEPROG%g
- s%@FLAGS@%$FLAGS%g
- s%@LDLIBS@%$LDLIBS%g
- s%@CONFIG_DIR@%$CONFIG_DIR%g
- s%@MODULE_DIR@%$MODULE_DIR%g
- s%@BINARY_DIR@%$BINARY_DIR%g
- s%@MODULES@%$MODULES%g
- " .${file}.inc >> $file
-done
-`chmod 700 inspircd`
-
-echo -e "\033[0;37mWriting \033[1;32msrc/modules/Makefile\033[0;37m"
-rm -f src/modules/Makefile
-
-# Generate the Header..
-
-echo "# (C) ChatSpike development team" >> src/modules/Makefile
-echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
-echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
-echo "# for assisting with making this work right." >> src/modules/Makefile
-echo "#" >> src/modules/Makefile
-echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
-echo "# please run ./configure --update" >> src/modules/Makefile
-echo "" >> src/modules/Makefile
-echo "all: \$(MODULES)" >> src/modules/Makefile
-echo "" >> src/modules/Makefile
-
-for module in src/modules/*.cpp ; do
- flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
- mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
- mod2=`echo $module | sed 's/src\/modules\///'`
- echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
- echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
- echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
- echo "" >> src/modules/Makefile
-done
-
-
-echo ""
-
-echo ""
-echo "Do you want to compile the IRCd binaries?"
-echo -e $n "[\033[1;32my\033[0;37m] $c"
-read YN
-if [ "$YN" != "n" ] ; then
- echo ""
- echo -e "\033[1;32mCompiling...\033[0;37m"
- echo ""
- cd $ME
- $MAKEPROG
- echo ""
- echo "Done!"
-else
- echo ""
- echo -e "To build your server with these settings, please type '\033[1;32m$MAKEPROG\033[0;37m' now."
-fi
-
-
-echo ""
-echo -e "*** \033[1;32mRemember to edit your configuration files!!!\033[0;37m ***"
-echo ""
+chomp($topdir = `pwd`);
+$this = resolve_directory($topdir); # PWD, Regardless.
+@modlist = (); # Declare for Module List..
+%config = (); # Initiate Configuration Hash..
+$config{ME} = resolve_directory($topdir); # Present Working Directory
+$config{BASE_DIR} = $config{ME}; # Use CWD as 'Base' Directory.
+$config{CONFIG_DIR} = resolve_directory($config{ME}."/conf"); # Configuration Directory
+$config{MODULE_DIR} = resolve_directory($config{ME}."/modules"); # Modules Directory
+$config{BINARY_DIR} = resolve_directory($config{ME}."/bin"); # Binary Directory
+$config{LIBRARY_DIR} = resolve_directory($config{ME}."/lib"); # Library Directory
+chomp($config{HAS_GNUTLS} = `libgnutls-config --version 2>/dev/null | cut -c 1,2,3`); # GNUTLS Version.
+chomp($config{HAS_OPENSSL} = `openssl version 2>/dev/null`); # Openssl version
+$config{USE_GNUTLS} = "n"; # Use gnutls.
+$config{USE_OPENSSL} = "n"; # Use openssl.
+$config{OPTIMITEMP} = "0"; # Default Optimisation Value
+$config{OPTIMISATI} = "-g"; # Optimisation Flag
+$config{NICK_LENGT} = "31"; # Default Nick Length
+$config{CHAN_LENGT} = "64"; # Default Channel Name Length
+$config{MAX_CHANNE} = "20"; # Default Max. Channels per user
+$config{MAX_OPERCH} = "60"; # Default Max. Channels per oper
+$config{MAXI_MODES} = "20"; # Default Max. Number of Modes set at once.
+$config{HAS_STRLCPY} = "false"; # strlcpy Check.
+$config{HAS_STDINT} = "false"; # stdint.h check
+$config{HAS_EXECINFO} = "0"; # execinfo.h Check.
+$config{USE_KQUEUE} = "y"; # kqueue enabled
+$config{USE_EPOLL} = "y"; # epoll enabled
+$config{THREADED_DNS} = "n"; # threaded dns (experimental)
+$config{IPV6} = "n"; # IPv6 support (experimental)
+$config{STATIC_LINK} = "no"; # are doing static modules?
+chomp($config{MAX_CLIENT_T} = `sh -c \"ulimit -n\"`); # FD Limit
+chomp($config{MAX_DESCRIPTORS} = `sh -c \"ulimit -n\"`); # Hard FD Limit
+chomp($config{GCCVER} = `g++ -dumpversion | cut -c 1`); # Major GCC Version
+chomp($config{OSNAME} = `/bin/uname`); # Operating System Name
+$config{CC} = "g++"; # C++ compiler
+$config{MAKEORDER} = "ircd mods"; # build order
+$config{STATICLIBS} = ""; # library archive path
+$config{MAX_IDENT} = "12"; # max ident size
+$config{MAX_QUIT} = "255"; # max quit message size
+$config{MAX_TOPIC} = "307"; # max topic size
+$config{MAX_KICK} = "255"; # max kick message size
+$config{MAX_GECOS} = "128"; # max GECOS size
+$config{MAX_AWAY} = "200"; # max AWAY size
+
+$no_svn = 0;
+
+$config{HAS_OPENSSL} =~ /OpenSSL (\S+) \d+ \S+ \d{4}/;
+$config{HAS_OPENSSL} = $1;
+
+if ($config{GCCVER} eq "") {
+ print "g++ was not found! You require g++ (the GNU C++ compiler, part of GCC) to build InspIRCd!\n";
+ return 0;
+}
+
+# Minihack! Convert Cygwin to 'Cyg-Static' so i can
+# Keep my dynamic module experiments here for later
+# concideration!
+
+if ($config{OSNAME} =~ /CYGWIN/) {
+ $config{OSNAME} = "CYG-STATIC";
+}
+
+if ((!$config{OSNAME}) || ($config{OSNAME} eq "")) {
+ chomp($config{OSNAME} = `/usr/bin/uname`);
+ if ((!$config{OSNAME}) || ($config{OSNAME} eq "")){
+ $config{OSNAME} = "Unknown";
+ }
+}
+
+if (!$config{MAX_CLIENT_T}) {
+ $config{MAX_CLIENT_T} = 1024; # Set a reasonable 'Default'
+ $fd_scan_fail = "true"; # Used Later
+}
+
+# Get and Set some important vars..
+getmodules();
+
+my $arg = $ARGV[0]; # Do Some Argument Checks..
+if ($arg eq "-clean") {
+ system("rm -rf .config.cache");
+} # Remove the config.cache file.
+
+if ($arg eq "-update") {
+ # Does the cache file exist?
+ if (!getcache()) {
+ # No, No it doesn't.. *BASH*
+ print "You have not run ./configure before. Please do this before trying to run the update script.\n";
+ exit 0;
+ } else {
+ # We've Loaded the cache file and all our variables..
+ print "Updating Files..\n";
+ getosflags();
+ $has_epoll = $config{HAS_EPOLL};
+ $has_kqueue = $config{HAS_KQUEUE};
+ writefiles(1);
+ print "Complete.\n";
+ exit;
+ }
+}
+
+if ($arg eq "-modupdate") {
+ # Does the cache file exist?
+ if (!getcache()) {
+ # No, No it doesn't.. *BASH*
+ print "You have not run ./configure before. Please do this before trying to run the update script.\n";
+ exit 0;
+ } else {
+ # We've Loaded the cache file and all our variables..
+ print "Updating Files..\n";
+ getosflags();
+ $has_epoll = $config{HAS_EPOLL};
+ $has_kqueue = $config{HAS_KQUEUE};
+ writefiles(0);
+ print "Complete.\n";
+ exit;
+ }
+}
+
+
+
+if ($arg eq "-svnupdate") {
+ my $fail = 0;
+ open(FH,"<.svn/entries") or $fail = 1;
+ if ($fail) {
+ print "This is not an SVN copy of InspIRCd.\n";
+ exit;
+ }
+ system("svn update");
+ system("perl configure -update");
+ if ($ARGV[1] eq "rebuild") {
+ system("make install");
+ }
+ exit;
+}
+
+print "Checking for cache from previous configure...\n";
+getcache();
+print "Checking operating system version...\n";
+getosflags();
+
+if (!$config{MAX_CLIENT}) {
+ # If the cache hasn't set the max clients, copy the variable of MAX_CLIENT_T, this
+ # allows us to keep _T for testing purposes. (ie. "Are you sure you want to go
+ # higher than the found value" :))
+ $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
+}
+
+printf "Checking if stdint.h exists... ";
+$config{HAS_STDINT} = "true";
+my $fail = 0;
+open(STDINT, "</usr/include/stdint.h") or $config{HAS_STDINT} = "false";
+if ($config{HAS_STDINT} eq "true") {
+ close(STDINT);
+}
+print "yes\n" if $config{HAS_STDINT} eq "true";
+print "no\n" if $config{HAS_STDINT} eq "false";
+
+
+printf "Checking if strlcpy exists... ";
+# Perform the strlcpy() test..
+$config{HAS_STRLCPY} = "false";
+my $fail = 0;
+open(STRLCPY, "</usr/include/string.h") or $fail = 1;
+if (!$fail) {
+ while (chomp($line = <STRLCPY>)) {
+ # try and find the delcaration of:
+ # size_t strlcpy(...)
+ if ($line =~ /size_t(\0x9|\s)+strlcpy/) {
+ $config{HAS_STRLCPY} = "true";
+ }
+ }
+ close(STRLCPY);
+}
+print "yes\n" if $config{HAS_STRLCPY} eq "true";
+print "no\n" if $config{HAS_STRLCPY} eq "false";
+
+printf "Checking if execinfo.h exists... ";
+$config{HAS_EXECINFO} = "0";
+my $fail = 0;
+open(EXECINFO, "</usr/include/execinfo.h") or $fail = 1;
+if ($fail) {
+ $fail = 0;
+ open(EXECINFO, "</usr/local/include/execinfo.h") or $fail = 1;
+ if (!$fail) {
+ printf "/usr/local/include/execinfo.h\n";
+ $config{HAS_EXECINFO} = "1";
+ close(EXECINFO);
+ }
+ else {
+ printf "Not found!\n";
+ }
+}
+else {
+ printf "/usr/include/execinfo.h\n";
+ $config{HAS_EXECINFO} = "1";
+ close(EXECINFO);
+}
+
+printf "Checking if kqueue exists... ";
+$has_kqueue = 0;
+$fail = 0;
+open(KQUEUE, "</usr/include/sys/event.h") or $fail = 1;
+if (!$fail) {
+ while (chomp($line = <KQUEUE>)) {
+ # try and find the delcaration of:
+ # int kqueue(void);
+ if ($line =~ /int(\0x9|\s)+kqueue/) {
+ $has_kqueue = 1;
+ }
+ }
+ close(KQUEUE);
+}
+print "yes\n" if $has_kqueue == 1;
+print "no\n" if $has_kqueue == 0;
+
+printf "Checking if epoll exists... ";
+$has_epoll = 0;
+$fail = 0;
+open(EPOLL, "</usr/include/sys/epoll.h") or $fail = 1;
+if (!$fail) {
+ $has_epoll = 1;
+ close(EPOLL);
+}
+if ($has_epoll) {
+ my $kernel = `uname -r`;
+ chomp($kernel);
+ if (($kernel =~ /2\.0/) || ($kernel =~ /2\.2/) || ($kernel =~ /2\.4/)) {
+ $has_epoll = 0;
+ }
+}
+print "yes\n" if $has_epoll == 1;
+print "no\n" if $has_epoll == 0;
+
+if (($config{OSNAME} =~ /CYGWIN/) || ($config{OSNAME} eq "CYG-STATIC")) {
+ $config{HAS_STRLCPY} = "true";
+}
+
+$config{HAS_EPOLL} = $has_epoll;
+$config{HAS_KQUEUE} = $has_kqueue;
+
+printf "Checking for libgnutls... ";
+if (($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS} >= 1.2) || ($config{HAS_GNUTLS} eq "y"))) {
+ print "yes\n";
+ $config{HAS_GNUTLS} = "y";
+} else {
+ print "no\n";
+ $config{HAS_GNUTLS} = "n";
+}
+
+printf "Checking for openssl... ";
+if (($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL} >= 0.8) || ($config{HAS_OPENSSL} eq "y"))) {
+ print "yes\n";
+ $config{HAS_OPENSSL} = "y";
+} else {
+ print "no\n";
+ $config{HAS_OPENSSL} = "n";
+}
+
+################################################################################
+# BEGIN INTERACTIVE PART #
+################################################################################
+
+# Clear the Screen..
+system("clear");
+# Display Splash Logo..
+show_splash();
+chomp($wholeos = `uname -mnr`);
+
+my $rev = getrevision();
+# Display Introduction Message..
+print "
+Welcome to the InspIRCd Configuration program!
+
+*** If you are unsure of any of these values, leave it blank for ***
+*** standard settings that will work, and your server will run ***
+*** using them. If you are running this server as part of a ***
+*** larger network, you must consult with your network admins ***
+*** for the proper values to use, or server links will be unstable! ***
+
+Press \033[1m<RETURN>\033[0m to accept the default for any option, or enter
+a new value. Please note: You will \033[1mHAVE\033[0m to read the docs
+dir, otherwise you won't have a config file!
+
+Your operating system is: \033[1;32m$config{OSNAME}\033[0m ($wholeos), fdmax: $config{MAX_CLIENT_T}
+Your InspIRCd revision ID is \033[1;32mr$rev\033[0m";
+if ($rev eq "r0") {
+ print " (Non-SVN build)";
+}
+print ".\n\n";
+
+$config{CHANGE_COMPILER} = "n";
+print "I have detected the following compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.x\033[0m)\n";
+
+while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
+ print "\033[1;32mIMPORTANT!\033[0m A GCC 2.x compiler has been detected, and
+should NOT be used. You should probably specify a newer compiler.\n\n";
+ yesno(CHANGE_COMPILER,"Do you want to change the compiler?");
+ if ($config{CHANGE_COMPILER} =~ /y/i) {
+ print "What command do you want to use to invoke your compiler?\n";
+ print "[\033[1;32m$config{CC}\033[0m] -> ";
+ chomp($config{CC} = <STDIN>);
+ if ($config{CC} eq "") {
+ $config{CC} = "g++";
+ }
+ chomp($foo = `$config{CC} -dumpversion | cut -c 1`);
+ if ($foo ne "") {
+ chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
+ print "Queried compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.x\033[0m)\n";
+ if ($config{GCCVER} < 3) {
+ print "\033[1;32mGCC 2.x WILL NOT WORK!\033[0m. Let's try that again, shall we?\n";
+ }
+ }
+ else {
+ print "\033[1;32mWARNING!\033[0m Could not execute the compiler you specified. You may want to try again.\n";
+ }
+ }
+}
+
+print "\n";
+
+# Directory Settings..
+my $tmpbase = $config{BASE_DIR};
+dir_check("do you wish to install the InspIRCd base", "BASE_DIR");
+if ($tmpbase ne $config{BASE_DIR}) {
+ $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Directory
+ $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
+ $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
+ $config{LIBRARY_DIR} = resolve_directory($config{BASE_DIR}."/lib"); # Library Directory
+}
+
+dir_check("are the configuration files", "CONFIG_DIR");
+dir_check("are the modules to be compiled to", "MODULE_DIR");
+dir_check("is the IRCd binary to be placed", "BINARY_DIR");
+dir_check("are the IRCd libraries to be placed", "LIBRARY_DIR");
+
+if ($has_kqueue) {
+ yesno(USE_KQUEUE,"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
+ print "\n";
+}
+if ($has_epoll) {
+ yesno(USE_EPOLL,"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
+ print "\n";
+}
+$chose_hiperf = (($config{USE_EPOLL} eq "y") || ($config{USE_KQUEUE} eq "y"));
+if (!$chose_hiperf) {
+ print "No high-performance socket engines are available, or you chose\n";
+ print "not to enable one. Defaulting to select() engine.\n\n";
+}
+
+yesno(THREADED_DNS,"Would you like to enable the experimental multi-threaded DNS lookup?");
+print "\n";
+
+yesno(IPV6,"Would you like to enable IPv6 support?");
+print "\n";
+
+if (($config{HAS_GNUTLS} eq "y") && ($config{HAS_OPENSSL} eq "y")) {
+ print "I have detected both GnuTLS and OpenSSL on your system.\n";
+ print "I will default to GnuTLS. If you wish to use OpenSSL\n";
+ print "instead, you should enable the OpenSSL module yourself\n";
+ print "by copying it from src/modules/extra to src/modules.\n\n";
+}
+
+if ($config{HAS_GNUTLS} eq "y") {
+ yesno(USE_GNUTLS, "Would you like to enable SSL Support?");
+ if ($config{USE_GNUTLS} eq "y") {
+ print "\nUsing GnuTLS SSL module.\n";
+ }
+} elsif ($config{HAS_OPENSSL} eq "y") {
+ yesno(USE_OPENSSL, "Would you like to enable SSL Support?");
+ if ($config{USE_OPENSSL} eq "y") {
+ print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
+ }
+}
+
+print "\nThe following questions will ask you for various figures relating\n";
+print "To your IRCd install. Please note that these should usually be left\n";
+print "as defaults unless you have a real reason to change them. If they\n";
+print "changed, then the values must be identical on all servers on your\n";
+print "network, or malfunctions and/or crashes may occur, with the exception\n";
+print "of the 'maximum number of clients' setting which may be different on\n";
+print "different servers on the network.\n\n";
+
+# File Descriptor Settings..
+my $continue = 0;
+while (!$continue) {
+ print "Maximum number of clients at any one time ($config{MAX_CLIENT_T})\n";
+ print "[\033[1;32m$config{MAX_CLIENT}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAX_CLIENT};
+ }
+ if ($var =~ /^\d+$/) {
+ if (($var > $config{MAX_CLIENT_T}) && ($fd_scan_failed ne true)) {
+ # Client has entered a larger number than the 'discovered' value
+ # Confirm.
+ print "WARNING: Our scans have indicated that you are attempting
+to use more sockets than there are avaliable. Are you sure
+you wish to do this? It may cause the IRCd to malfunction [y/n]
+[\033[1;32mn\033[0m] -> $c";
+ chomp($tmp = <STDIN>);
+ if ($tmp ne "y") {
+ print "Please enter the correct value.\n\n";
+ next;
+ }
+ }
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ next;
+ }
+ # If we get here, we should be good to go.
+ $config{MAX_CLIENT} = $var;
+ $continue = 1;
+ print "\n";
+}
+
+my $continue = 0;
+while (!$continue) {
+ print "What is the maximum length of nicknames?\n";
+ print "[\033[1;32m$config{NICK_LENGT}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{NICK_LENGT};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{NICK_LENGT} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of channel names?\n";
+ print "[\033[1;32m$config{CHAN_LENGT}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{CHAN_LENGT};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{CHAN_LENGT} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum number of channels a normal user may join at any one time?\n";
+ print "[\033[1;32m$config{MAX_CHANNE}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAX_CHANNE};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_CHANNE} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum number of channels an oper may join at any one time?\n";
+ print "[\033[1;32m$config{MAX_OPERCH}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAX_OPERCH};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_OPERCH} = $var;
+ $continue = 1;
+ print "\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum number of mode changes in one line?\n";
+ print "[\033[1;32m$config{MAXI_MODES}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAXI_MODES};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAXI_MODES} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of an ident (username)?\n";
+ print "[\033[1;32m$config{MAX_IDENT}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAX_IDENT};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_IDENT} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of a quit message?\n";
+ print "[\033[1;32m$config{MAX_QUIT}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAX_QUIT};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_QUIT} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of a channel topic?\n";
+ print "[\033[1;32m$config{MAX_TOPIC}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAX_TOPIC};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_TOPIC} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of a kick message?\n";
+ print "[\033[1;32m$config{MAX_KICK}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAX_KICK};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_KICK} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of a GECOS (real name) field?\n";
+ print "[\033[1;32m$config{MAX_GECOS}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAX_GECOS};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_GECOS} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+$continue = 0;
+while (!$continue) {
+ print "What is the maximum length of an away message?\n";
+ print "[\033[1;32m$config{MAX_AWAY}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{MAX_AWAY};
+ }
+ if ($var =~ /^\d+$/) {
+ # We don't care what the number is, set it and be on our way.
+ $config{MAX_AWAY} = $var;
+ $continue = 1;
+ print "\n";
+ } else {
+ print "You must enter a number in this field. Please try again.\n\n";
+ }
+}
+
+# Code Optimisation
+print "Enter the Level Of Binary optimisation. This is a number between 0 and 3.
+The InspIRCd Team will NOT support any bug reports above 0. Also note,
+the IRCd behaviour will be different depending on this value. Please
+read the documentation for more information.
+
+The higher the number, the more optimised your binary will be. This
+value will default to 0 if you either don't enter a number, or enter
+a value outside the range.
+
+As always, if you are unsure, just press enter and accept the default.\n\n";
+print "[\033[1;32m$config{OPTIMITEMP}\033[0m] -> ";
+chomp($var = <STDIN>);
+if ($var eq "") {
+ $var = $config{OPTIMITEMP};
+}
+
+if ($var eq "1") {
+ $config{OPTIMITEMP} = 1;
+ $config{OPTIMISATI} = "-O";
+} elsif ($var eq "2") {
+ $config{OPTIMITEMP} = 2;
+ $config{OPTIMISATI} = "-O2";
+} elsif ($var eq "3") {
+ $config{OPTIMITEMP} = 3;
+ $config{OPTIMISATI} = "-O3";
+} else {
+ $config{OPTIMITEMP} = 0;
+ $config{OPTIMISATI} = "-g";
+}
+
+print "\n\033[1;32mPre-build configuration is complete!\033[0m\n\n";
+print "\033[0mBase install path:\033[1;32m\t\t$config{BASE_DIR}\033[0m\n";
+print "\033[0mConfig path:\033[1;32m\t\t\t$config{CONFIG_DIR}\033[0m\n";
+print "\033[0mModule path:\033[1;32m\t\t\t$config{MODULE_DIR}\033[0m\n";
+print "\033[0mLibrary path:\033[1;32m\t\t\t$config{LIBRARY_DIR}\033[0m\n";
+print "\033[0mMax connections:\033[1;32m\t\t$config{MAX_CLIENT}\033[0m\n";
+print "\033[0mMax User Channels:\033[1;32m\t\t$config{MAX_CHANNE}\033[0m\n";
+print "\033[0mMax Oper Channels:\033[1;32m\t\t$config{MAX_OPERCH}\033[0m\n";
+print "\033[0mMax nickname length:\033[1;32m\t\t$config{NICK_LENGT}\033[0m\n";
+print "\033[0mMax channel length:\033[1;32m\t\t$config{CHAN_LENGT}\033[0m\n";
+print "\033[0mMax mode length:\033[1;32m\t\t$config{MAXI_MODES}\033[0m\n";
+print "\033[0mMax ident length:\033[1;32m\t\t$config{MAX_IDENT}\033[0m\n";
+print "\033[0mMax quit length:\033[1;32m\t\t$config{MAX_QUIT}\033[0m\n";
+print "\033[0mMax topic length:\033[1;32m\t\t$config{MAX_TOPIC}\033[0m\n";
+print "\033[0mMax kick length:\033[1;32m\t\t$config{MAX_KICK}\033[0m\n";
+print "\033[0mMax name length:\033[1;32m\t\t$config{MAX_GECOS}\033[0m\n";
+print "\033[0mMax away length:\033[1;32m\t\t$config{MAX_AWAY}\033[0m\n";
+print "\033[0mGCC Version Found:\033[1;32m\t\t$config{GCCVER}.x\033[0m\n";
+print "\033[0mOptimization Flag:\033[1;32m\t\t$config{OPTIMISATI}\033[0m\n";
+print "\033[0mCompiler program:\033[1;32m\t\t$config{CC}\033[0m\n";
+print "\033[0mStatic modules:\033[1;32m\t\t\t$config{STATIC_LINK}\033[0m\n";
+print "\033[0mMultithread DNS:\033[1;32m\t\t$config{THREADED_DNS}\033[0m\n";
+print "\033[0mIPv6 Support:\033[1;32m\t\t\t$config{IPV6}\033[0m\n";
+print "\033[0mGnuTLS Support:\033[1;32m\t\t\t$config{USE_GNUTLS}\033[0m\n";
+print "\033[0mOpenSSL Support:\033[1;32m\t\t$config{USE_OPENSSL}\033[0m\n\n";
+
+if ($config{USE_GNUTLS} eq "y") {
+ $failed = 0;
+ open(TMP, "<src/modules/m_ssl_gnutls.cpp") or $failed = 1;
+ close(TMP);
+ if ($failed) {
+ print "Symlinking src/modules/m_ssl_gnutls.cpp from extra/\n";
+ chdir("src/modules");
+ system("ln -s extra/m_ssl_gnutls.cpp");
+ chdir("../..");
+ }
+ getmodules();
+ $failed = 0;
+ open(TMP, "<$config{CONFIG_DIR}/key.pem") or $failed = 1;
+ close(TMP);
+ open(TMP, "<$config{CONFIG_DIR}/cert.pem") or $failed = 1;
+ close(TMP);
+ if ($failed) {
+ print "SSL Certificates Not found, Generating.. \n\n
+*************************************************************
+* Generating the Private Key may take some time, go grab a *
+* Coffee. Even better, to generate some more entropy if it *
+* is taking a while, open another console and type du / a *
+* few times and get that HD going :) Then answer the *
+* Questions which follow. If you are unsure, just hit enter *
+*************************************************************\n\n";
+ system("certtool --generate-privkey --outfile key.pem");
+ system("certtool --generate-self-signed --load-privkey key.pem --outfile cert.pem");
+ print "\nCertificate generation complete, copying to config directory... ";
+ system("mv key.pem $config{CONFIG_DIR}/key.pem");
+ system("mv cert.pem $config{CONFIG_DIR}/cert.pem");
+ print "Done.\n\n";
+ } else {
+ print "SSL Certificates found, skipping.\n\n"
+ }
+} elsif ($config{USE_OPENSSL} eq "y") {
+ $failed = 0;
+ open(TMP, "<src/modules/m_ssl_openssl.cpp") or $failed = 1;
+ close(TMP);
+ if ($failed) {
+ print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
+ chdir("src/modules");
+ system("ln -s extra/m_ssl_openssl.cpp");
+ chdir("../..");
+ }
+ getmodules();
+ $failed = 0;
+ open(TMP, "<$config{CONFIG_DIR}/key.pem") or $failed = 1;
+ close(TMP);
+ open(TMP, "<$config{CONFIG_DIR}/cert.pem") or $failed = 1;
+ close(TMP);
+ if ($failed) {
+ print "SSL Certificates Not found, Generating.. \n\n
+*************************************************************
+* Generating the certificates may take some time, go grab a *
+* coffee, or something. *
+*************************************************************\n\n";
+ system("openssl req -x509 -nodes -newkey rsa:1024 -keyout key.pem -out cert.pem");
+ system("openssl dhparam -out dhparams.pem 1024");
+ print "\nCertificate generation complete, copying to config directory... ";
+ system("mv key.pem $config{CONFIG_DIR}/key.pem");
+ system("mv cert.pem $config{CONFIG_DIR}/cert.pem");
+ system("mv dhparams.pem $config{CONFIG_DIR}/dhparams.pem");
+ print "Done.\n\n";
+ } else {
+ print "SSL Certificates found, skipping.\n\n"
+ }
+}
+if (($config{USE_GNUTLS} eq "n") && ($config{USE_OPENSSL} eq "n")) {
+ print "Skipping SSL Certificate generation, SSL support is not available.\n\n";
+}
+
+getosflags();
+makecache();
+writefiles(1);
+
+print "\n\n";
+print "To build your server with these settings, please type '\033[1;32m$config{MAKEPROG}\033[0m' now.\n";
+if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
+ print "Please remember that to enable \033[1;32mSSL support\033[0m you must\n";
+ print "load the required modules in your config. This configure process\n";
+ print "has just prepared these modules to be compiled for you, and has not\n";
+ print "configured them to be compiled into the core of the ircd.\n";
+}
+print "*** \033[1;32mRemember to edit your configuration files!!!\033[0m ***\n\n\n";
+if (($config{OSNAME} eq "OpenBSD") && ($config{CC} ne "eg++")) {
+ print "\033[1;32mWARNING!\033[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but i'm letting you\ngo ahead with it anyway, just in case i'm wrong :-)\n";
+}
+
+if ($config{GCCVER} < "3") {
+ print <<FOO2;
+\033[1;32mWARNING!\033[0m You are attempting to compile InspIRCd on GCC 2.x!
+GCC 2.x series compilers only had partial (read as broken) C++ support, and
+your compile will most likely fail horribly! If you have any problems, do NOT
+report them to the bugtracker or forums without first upgrading your compiler
+to a newer 3.x or 4.x (or whatever is available currently) version.
+FOO2
+}
+
+################################################################################
+# HELPER FUNCTIONS #
+################################################################################
+sub getcache {
+ # Retrieves the .config.cache file, and loads values into the main config hash.
+ open(CACHE, ".config.cache") or return undef;
+ while (<CACHE>) {
+ chomp;
+ # Ignore Blank lines, and comments..
+ next if /^\s*$/;
+ next if /^\s*#/;
+ my ($key, $value) = split("=", $_);
+ $value =~ /^\"(.*)\"$/;
+ # Do something with data here!
+ $config{$key} = $1;
+ }
+ close(CONFIG);
+ return "true";
+}
+
+sub makecache {
+ # Dump the contents of %config
+ print "Writing \033[1;32mcache file\033[0m for future ./configures ...\n";
+ open(FILEHANDLE, ">.config.cache");
+ foreach $key (keys %config) {
+ print FILEHANDLE "$key=\"$config{$key}\"\n";
+ }
+ close(FILEHANDLE);
+}
+
+sub dir_check {
+ my ($desc, $hash_key) = @_;
+ my $complete = 0;
+ while (!$complete) {
+ print "In what directory $desc?\n";
+ print "[\033[1;32m$config{$hash_key}\033[0m] -> ";
+ chomp($var = <STDIN>);
+ if ($var eq "") {
+ $var = $config{$hash_key};
+ }
+ if ($var =~ /^\~\/(.+)$/) {
+ # Convert it to a full path..
+ $var = resolve_directory($ENV{HOME} . "/" . $1);
+ }
+ if (substr($var,0,1) ne "/")
+ {
+ # Assume relative Path was given.. fill in the rest.
+ $var = $this . "/$var";
+ }
+ $var = resolve_directory($var);
+ if (! -e $var) {
+ print "$var does not exist. Create it?\n[\033[1;32my\033[0m] ";
+ chomp($tmp = <STDIN>);
+ if (($tmp eq "") || ($tmp =~ /^y/i)) {
+ # Attempt to Create the Dir..
+ $chk = system("mkdir -p \"$var\" >> /dev/null 2>&1") / 256;
+ if ($chk != 0) {
+ print "Unable to create directory. ($var)\n\n";
+ # Restart Loop..
+ next;
+ }
+ } else {
+ # They said they don't want to create, and we can't install there.
+ print "\n\n";
+ next;
+ }
+ } else {
+ if (!is_dir($var)) {
+ # Target exists, but is not a directory.
+ print "File $var exists, but is not a directory.\n\n";
+ next;
+ }
+ }
+ # Either Dir Exists, or was created fine.
+ $config{$hash_key} = $var;
+ $complete = 1;
+ print "\n";
+ }
+}
+
+sub getosflags {
+ if ($config{OSNAME} =~ /BSD$/) {
+ $config{LDLIBS} = "-Ldl -lstdc++";
+ $config{FLAGS} = "-fPIC -frtti -Wall -Woverloaded-virtual $config{OPTIMISATI}";
+ $config{MAKEPROG} = "gmake";
+ if ($config{OSNAME} eq "OpenBSD") {
+ chomp($foo = `eg++ -dumpversion | cut -c 1`);
+ # theyre running the package version of gcc (eg++)... detect it and set up its version numbers.
+ # if theyre not running this, configure lets the build continue but they probably wont manage to
+ # compile as this standard version is 2.95.3!
+ if ($foo ne "") {
+ $config{CC} = "eg++";
+ chomp($config{GCCVER} = `eg++ -dumpversion | cut -c 1`); # we must redo these if we change the compiler path
+ }
+ }
+ } else {
+ $config{LDLIBS} = "-ldl -lstdc++";
+ $config{FLAGS} = "-fPIC -frtti -Wall -Woverloaded-virtual $config{OPTIMISATI}";
+ $config{MAKEPROG} = "make";
+ if ($config{OSNAME} =~ /CYGWIN/) {
+ $config{FLAGS} = "-frtti -Wall -Woverloaded-virtual $config{OPTIMISATI}";
+ $config{LDLIBS} = "";
+ $config{MAKEPROG} = "/usr/bin/make";
+ $config{MAKEORDER} = "ircd mods";
+ } elsif ($config{OSNAME} eq "CYG-STATIC") {
+ $config{FLAGS} = "-frtti -Wall -Woverloaded-virtual $config{OPTIMISATI}";
+ $config{LDLIBS} = "";
+ $config{MAKEPROG} = "/usr/bin/make";
+ $config{MAKEORDER} = "mods ircd";
+ $config{STATICLIBS} = "modules/mods.a";
+ $config{STATIC_LINK} = "yes";
+ }
+ }
+ if ($config{OSNAME} =~ /SunOS/) {
+ # solaris/sunos needs these
+ # socket = bsd sockets api
+ # nsl = dns stuff
+ # rt = POSIX realtime extensions
+ # resolv = inet_aton only (why isnt this in nsl?!)
+ $config{LDLIBS} = $config{LDLIBS} . " -lsocket -lnsl -lrt -lresolv";
+ }
+}
+
+sub is_dir {
+ my ($path) = @_;
+ if (chdir($path)) {
+ chdir($this);
+ return 1;
+ } else {
+ # Just in case..
+ chdir($this);
+ return 0;
+ }
+}
+
+sub getmodules {
+ my $i = 0;
+ print "Detecting modules ";
+ opendir(DIRHANDLE, "src/modules");
+ foreach $name (sort readdir(DIRHANDLE)) {
+ if ($name =~ /^m_(.+)\.cpp$/)
+ {
+ $mod = $1;
+ if ($mod !~ /_static$/) {
+ $modlist[$i++] = $mod;
+ print ".";
+ }
+ }
+ }
+ closedir(DIRHANDLE);
+ print "\nOk, $i modules.\n";
+}
+
+sub getrevision {
+ if ($no_svn) {
+ return "0";
+ }
+ my $data = `svn info`;
+ if ($data eq "") {
+ $no_svn = 1;
+ $rev = "0";
+ return $rev;
+ }
+ $data =~ /Revision: (\d+)/;
+ my $rev = $1;
+ if (!defined($rev)) {
+ $rev = "0";
+ }
+ return $rev;
+}
+
+sub writefiles {
+ my($writeheader) = @_;
+ # First File.. inspircd_config.h
+ chomp(my $incos = `uname -n -s -r`);
+ chomp(my $version = `sh ./src/version.sh`);
+ chomp(my $revision = getrevision());
+ $version = "$version(r$revision)";
+ chomp(my $revision2 = getrevision());
+ if ($writeheader == 1)
+ {
+ print "Writing \033[1;32minspircd_config.h\033[0m\n";
+ open(FILEHANDLE, ">include/inspircd_config.h");
+ my $NL = $config{NICK_LENGT}+1;
+ my $CL = $config{CHAN_LENGT}+1;
+ print FILEHANDLE <<EOF;
+/* Auto generated by configure, do not modify! */
+#ifndef __CONFIGURATION_AUTO__
+#define __CONFIGURATION_AUTO__
+
+#define CONFIG_FILE "$config{CONFIG_DIR}/inspircd.conf"
+#define MOD_PATH "$config{MODULE_DIR}"
+#define VERSION "$version"
+#define REVISION "$revision2"
+#define MAXCLIENTS $config{MAX_CLIENT}
+#define MAX_DESCRIPTORS $config{MAX_DESCRIPTORS}
+#define NICKMAX $NL
+#define CHANMAX $CL
+#define MAXCHANS $config{MAX_CHANNE}
+#define OPERMAXCHANS $config{MAX_OPERCH}
+#define MAXMODES $config{MAXI_MODES}
+#define IDENTMAX $config{MAX_IDENT}
+#define MAXQUIT $config{MAX_QUIT}
+#define MAXTOPIC $config{MAX_TOPIC}
+#define MAXKICK $config{MAX_KICK}
+#define MAXGECOS $config{MAX_GECOS}
+#define MAXAWAY $config{MAX_AWAY}
+#define OPTIMISATION $config{OPTIMITEMP}
+#define SYSTEM "$incos"
+#define MAXBUF 514
+EOF
+ if ($config{OSNAME} =~ /SunOS/) {
+ print FILEHANDLE "#define IS_SOLARIS\n";
+ }
+ if ($config{OSNAME} =~ /CYGWIN/) {
+ print FILEHANDLE "#define IS_CYGWIN\n";
+ print FILEHANDLE "#ifndef FD_SETSIZE\n#define FD_SETSIZE 1024\n#endif\n";
+ }
+ if ($config{OSNAME} eq "CYG-STATIC") {
+ print FILEHANDLE "#ifndef FD_SETSIZE\n#define FD_SETSIZE 1024\n#endif\n";
+ }
+ if ($config{HAS_EXECINFO} eq "1") {
+ print FILEHANDLE "#define HAS_EXECINFO\n";
+ }
+ if ($config{STATIC_LINK} eq "yes") {
+ print FILEHANDLE "#define STATIC_LINK\n";
+ }
+ if ($config{GCCVER} >= 3) {
+ print FILEHANDLE "#define GCC3\n";
+ }
+ if ($config{HAS_STRLCPY} eq "true") {
+ print FILEHANDLE "#define HAS_STRLCPY\n";
+ }
+ if ($config{HAS_STDINT} eq "true") {
+ print FILEHANDLE "#define HAS_STDINT\n";
+ }
+ if ($config{THREADED_DNS} =~ /y/i) {
+ print FILEHANDLE "#define THREADED_DNS\n";
+ }
+ if ($config{IPV6} =~/y/i) {
+ print FILEHANDLE "#define IPV6\n";
+ }
+ my $use_hiperf = 0;
+ if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
+ print FILEHANDLE "#define USE_KQUEUE\n";
+ $se = "socketengine_kqueue";
+ $use_hiperf = 1;
+ }
+ if (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
+ print FILEHANDLE "#define USE_EPOLL\n";
+ $se = "socketengine_epoll";
+ $use_hiperf = 1;
+ }
+ # user didn't choose either epoll or select for their OS.
+ # default them to USE_SELECT (ewwy puke puke)
+ if (!$use_hiperf) {
+ print FILEHANDLE "#define USE_SELECT\n";
+ $se = "socketengine_select";
+ }
+ print FILEHANDLE "\n#endif\n";
+ close(FILEHANDLE);
+ }
+
+open(FILEHANDLE, ">include/inspircd_se_config.h");
+ print FILEHANDLE <<EOF;
+/* Auto generated by configure, do not modify or commit to svn! */
+#ifndef __CONFIGURATION_SOCKETENGINE__
+#define __CONFIGURATION_SOCKETENGINE__
+
+#include "$se.h"
+
+#endif
+EOF
+close(FILEHANDLE);
+
+
+ # Create a Modules List..
+ my $modules = "";
+ foreach $i (@modlist)
+ {
+ if ($config{STATIC_LINK} eq "yes") {
+ $modules .= "m_".$i.".o ";
+ }
+ else {
+ $modules .= "m_".$i.".so ";
+ }
+ }
+ chomp($modules); # Remove Redundant whitespace..
+
+
+ # Write all .in files.
+ my $tmp = "";
+ my $file = "";
+ my $exe = "inspircd";
+
+ if ($config{OSNAME} =~ /CYGWIN/) {
+ $exe = "inspircd.exe";
+ }
+
+ opendir(DIRHANDLE, $this);
+ if ($config{THREADED_DNS} =~ /y/i) {
+ $config{LDLIBS} = $config{LDLIBS} . " -pthread";
+ }
+ foreach $name (sort readdir(DIRHANDLE)) {
+ if ($name =~ /^\.(.+)\.inc$/) {
+ $file = $1;
+ # All .name.inc files need parsing!
+ $tmp = "";
+ open(FILEHANDLE, ".$file.inc");
+ while (<FILEHANDLE>) {
+ $tmp .= $_;
+ }
+ close(FILEHANDLE);
+
+ $tmp =~ s/\@CC\@/$config{CC}/;
+ $tmp =~ s/\@MAKEPROG\@/$config{MAKEPROG}/;
+ $tmp =~ s/\@FLAGS\@/$config{FLAGS}/;
+ $tmp =~ s/\@LDLIBS\@/$config{LDLIBS}/;
+ $tmp =~ s/\@BASE_DIR\@/$config{BASE_DIR}/;
+ $tmp =~ s/\@CONFIG_DIR\@/$config{CONFIG_DIR}/;
+ $tmp =~ s/\@MODULE_DIR\@/$config{MODULE_DIR}/;
+ $tmp =~ s/\@BINARY_DIR\@/$config{BINARY_DIR}/;
+ $tmp =~ s/\@LIBRARY_DIR\@/$config{LIBRARY_DIR}/;
+ $tmp =~ s/\@MODULES\@/$modules/;
+ $tmp =~ s/\@EXECUTABLE\@/$exe/;
+ $tmp =~ s/\@MAKEORDER\@/$config{MAKEORDER}/;
+ $tmp =~ s/\@STATICLIBS\@/$config{STATICLIBS}/;
+
+ print "Writing \033[1;32m$file\033[0m\n";
+ open(FILEHANDLE, ">$file");
+ print FILEHANDLE $tmp;
+ }
+ }
+ closedir(DIRHANDLE);
+
+ # Make inspircd executable!
+ chmod 0744, 'inspircd';
+
+ if ($config{STATIC_LINK} eq "yes") {
+ print "Writing static-build \033[1;32msrc/Makefile\033[0m\n";
+ write_static_makefile();
+ write_static_modules_makefile();
+ } elsif ($config{OSNAME} =~ /CYGWIN/) {
+ print "Writing cygwin-build \033[1;32msrc/Makefile\033[0m\n";
+ write_static_makefile();
+ write_dynamic_modules_makefile();
+ } else {
+ print "Writing dynamic-build \033[1;32msrc/Makefile\033[0m\n";
+ write_dynamic_makefile();
+ write_dynamic_modules_makefile();
+ }
+}
+
+sub getcompilerflags {
+ my ($file) = @_;
+ open(FLAGS, $file);
+ while (<FLAGS>) {
+ if ($_ =~ /^\/\* \$CompileFlags: (.+) \*\/$/) {
+ close(FLAGS);
+ return $1;
+ }
+ }
+ close(FLAGS);
+ return undef;
+}
+
+sub getlinkerflags {
+ my ($file) = @_;
+ open(FLAGS, $file);
+ while (<FLAGS>) {
+ if ($_ =~ /^\/\* \$LinkerFlags: (.+) \*\/$/) {
+ close(FLAGS);
+ return $1;
+ }
+ }
+ close(FLAGS);
+ return undef;
+}
+
+sub show_splash {
+ print "'\033[1;33m####\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::'\033[1;33m####\033[0m:'\033[1;33m########\033[0m:::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::\n";
+ print ". \033[1;33m##\033[0m:: \033[1;33m###\033[0m:: \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:. \033[1;33m##\033[0m:: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:\n";
+ print ": \033[1;33m##\033[0m:: \033[1;33m####\033[0m: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:\n";
+ print ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m \033[1;33m##\033[0m \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::: \033[1;33m##\033[0m:: \033[1;33m########\033[0m:: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:\n";
+ print ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m. \033[1;33m####\033[0m::..... \033[1;33m##\033[0m: \033[1;33m##\033[0m.....:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m.. \033[1;33m##\033[0m::: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:\n";
+ print ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m:. \033[1;33m###\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m::::::::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:: \033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:\n";
+ print "'\033[1;33m####\033[0m: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m##\033[0m::::::::'\033[1;33m####\033[0m: \033[1;33m##\033[0m:::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::\n";
+ print "\033[0m\033[0m....::..::::..:::......:::..:::::::::....::..:::::..:::......:::........:::\n\n";
+}
+
+sub resolve_directory {
+ use File::Spec;
+ return File::Spec->rel2abs($_[0]);
+}
+
+sub yesno {
+ my ($flag,$prompt) = @_;
+ print "$prompt [\033[1;32m$config{$flag}\033[0m] -> ";
+ chomp($tmp = <STDIN>);
+ if ($tmp eq "") { $tmp = $config{$flag} }
+
+ if (($tmp eq "") || ($tmp =~ /^y/i)) {
+ $config{$flag} = "y";
+ } else {
+ $config{$flag} = "n";
+ }
+ return;
+}
+
+sub write_static_modules_makefile {
+ # Modules Makefile..
+ print "Writing \033[1;32msrc/modules/Makefile\033[0m\n";
+ open(FILEHANDLE, ">src/modules/Makefile");
+
+ ###
+ # Module Makefile Header
+ ###
+ print FILEHANDLE <<EOF;
+# (C) ChatSpike development team
+# Makefile by <Craig\@ChatSpike.net>
+# Many Thanks to Andrew Church <achurch\@achurch.org>
+# for assisting with making this work right.
+#
+# Automatically Generated by ./configure to add a modules
+# please run ./configure --update
+
+all: \$(MODULES)
+
+EOF
+ ###
+ # End Module Makefile Header
+ ###
+
+ # Create a Modules List..
+ my $modules = "";
+ my $cmflags = "";
+ my $liflags = "";
+
+ open(MODLIST,">include/modlist.h");
+
+ ###
+ # Include File Header
+ ###
+ print MODLIST <<HEADER;
+// Generated automatically by configure. DO NOT EDIT!
+
+#ifndef __SYMBOLS__H_CONFIGURED__
+#define __SYMBOLS__H_CONFIGURED__
+
+HEADER
+ ###
+ # End Include File Header
+ ###
+
+ # Place Module List into Include
+ foreach $i (@modlist) {
+ if ($i !~ /_static$/) {
+ print MODLIST "extern \"C\" void * $i\_init (void);\n";
+ }
+ }
+ print MODLIST "\nstruct {const char *name; initfunc *value; } modsyms[] = {\n";
+
+ ###
+ # Build Module Crap
+ ###
+ foreach $i (@modlist)
+ {
+ if ($i !~ /_static$/) {
+ $cmflags = getcompilerflags("src/modules/m_".$i.".cpp");
+ $liflags = getlinkerflags("src/modules/m_".$i.".cpp");
+
+ ###
+ # Write Entry to the Makefile
+ ###
+ print FILEHANDLE <<EOCHEESE;
+m_$i.o: .m_$i\_static.cpp ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h
+ \$(CC) -pipe -I../../include \$(FLAGS) $flags -export-dynamic -c .m_$i\_static.cpp
+ mv m_$i\_static.o ../m_$i.o
+
+EOCHEESE
+ ###
+ # End Write Entry to the MakeFile
+ ###
+ print "Configuring module [\033[1;32mm_$i.so\033[0m] for static linking... ";
+ open(MODULE,"<src/modules/m_".$i.".cpp") or die("Could not open m_".$i.".cpp");
+ open(MUNGED,">src/modules/.m_".$i."_static.cpp") or die("Could not create .m_".$i."_static.cpp");
+ while (chomp($a = <MODULE>)) {
+ $a =~ s/init_module/$i\_init/g;
+ print MUNGED "$a\n";
+ }
+ close(MODULE);
+ close(MUNGED);
+ print MODLIST <<EOENT;
+{"m_$i.so",\&$i\_init},
+EOENT
+ print "done\n";
+ }
+ }
+ print MODLIST "{0}};\n\n#endif\n";
+ close(MODLIST);
+}
+
+sub write_dynamic_modules_makefile {
+ # Modules Makefile..
+ print "Writing \033[1;32msrc/modules/Makefile\033[0m\n";
+ open(FILEHANDLE, ">src/modules/Makefile");
+ my $extra = "";
+
+ if ($config{OSNAME} =~ /CYGWIN/) {
+ $extra = "../inspircd.dll.a";
+ }
+
+###
+# Module Makefile Header
+###
+ print FILEHANDLE <<EOF;
+# (C) ChatSpike development team
+# Makefile by <Craig\@ChatSpike.net>
+# Many Thanks to Andrew Church <achurch\@achurch.org>
+# for assisting with making this work right.
+#
+# Automatically Generated by ./configure to add a modules
+# please run ./configure -update or ./configure -modupdate
+
+all: \$(MODULES)
+
+EOF
+ ###
+ # End Module Makefile Header
+ ###
+
+ # Create a Modules List..
+ my $modules = "";
+ my $cmflags = "";
+ my $liflags = "";
+ my $crud = "";
+
+ foreach $i (@modlist) {
+ ###
+ # Write Entry to the MakeFile
+ ###
+ $cmflags = getcompilerflags("src/modules/m_".$i.".cpp");
+ $liflags = getlinkerflags("src/modules/m_".$i.".cpp");
+ print FILEHANDLE <<EOCHEESE;
+m_$i.so: m_$i.cpp ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h
+ \$(CC) -pipe -I../../include \$(FLAGS) $cmflags -export-dynamic -c m_$i.cpp
+ \$(CC) \$(FLAGS) -shared $liflags -o m_$i.so m_$i.o $extra
+
+EOCHEESE
+ $crud = $crud . " \@install -v -m 0700 m_$i.so \$(MODPATH)\n";
+ ###
+ # End Write Entry to the MakeFile
+ ###
+ }
+ print FILEHANDLE "modinst:\n \@echo \"Installing modules...\"\n" . $crud;
+}
+
+
+sub write_static_makefile {
+ open(FH,">src/Makefile") or die("Could not write src/Makefile!");
+ my $i = 0;
+ my @cmdlist = ();
+ opendir(DIRHANDLE, "src");
+ foreach $name (sort readdir(DIRHANDLE)) {
+ if ($name =~ /^cmd_(.+)\.cpp$/) {
+ $cmdlist[$i++] = $1;
+ }
+ }
+ closedir(DIRHANDLE);
+ my $cmdobjs = "";
+ my $srcobjs = "";
+ foreach my $cmd (@cmdlist) {
+ $cmdobjs = $cmdobjs . "cmd_$cmd.o ";
+ $srcobjs = $srcobjs . "cmd_$cmd.cpp ";
+ }
+ print FH <<EOM;
+# Insp Makefile :p
+#
+# (C) ChatSpike development team
+# Makefile by <Craig\@ChatSpike.net>
+# Makefile version 2 (statically linked core) by <brain\@inspircd.org>
+#
+
+CC = im a cheezeball
+
+CXXFLAGS = -I../include \${FLAGS}
+CPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* //' | grep -v svn)
+RELCPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* /modes\\//' | grep -v svn)
+
+EOM
+
+$se = "socketengine_select";
+if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
+ $se = "socketengine_kqueue";
+}
+elsif (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
+ $se = "socketengine_epoll";
+}
+
+ ###
+ # This next section is for cygwin dynamic module builds.
+ # Basically, what we do, is build the inspircd core as a library
+ # then the main executable uses that. the library is capable of
+ # loading / unloading the modules dynamically :)
+ # Massive thanks to the guys on #cygwin @ irc.freenode.net for helping
+ # make this work :)
+ ###
+
+ if ($config{OSNAME} =~ /CYGWIN/) {
+ print FH <<EOM;
+all: timer.o aes.o command_parse.o cull_list.o userprocess.o socketengine.o socket.o hashcomp.o channels.o mode.o xline.o inspstring.o dns.o base.o configreader.o inspsocket.o message.o $cmdobjs commands.o dnsqueue.o dynamic.o users.o modules.o wildcard.o helperfuncs.o snomasks.o inspircd.exe
+
+inspircd.exe: inspircd.dll.a
+ \$(CC) -o \$@ \$^
+
+inspircd.dll inspircd.dll.a: inspircd.o channels.o mode.o xline.o inspstring.o dns.o base.o configreader.o inspsocket.o message.o $cmdobjs commands.o dnsqueue.o dynamic.o users.o modules.o wildcard.o helperfuncs.o hashcomp.o socket.o socketengine.o userprocess.o cull_list.o command_parse.o aes.o timer.o snomasks.o
+ \$(CC) -shared -Wl,--out-implib=inspircd.dll.a -o inspircd.dll \$^
+EOM
+ } else {
+ print FH <<EOM;
+all: timer.o aes.o command_parse.o cull_list.o userprocess.o socketengine.o socket.o hashcomp.o channels.o mode.o xline.o inspstring.o dns.o base.o configreader.o inspsocket.o message.o $cmdobjs commands.o dnsqueue.o dynamic.o users.o modules.o wildcard.o helperfuncs.o snomasks.o \$(MODULES) inspircd.exe
+
+inspircd.exe: inspircd.cpp ../include/base.h ../include/channels.h ../include/inspircd.h ../include/channels.h ../include/globals.h ../include/inspircd_config.h ../include/base.h
+ \$(CC) -I../include \$(FLAGS) inspircd.cpp -o inspircd.exe \$(LDLIBS) channels.o mode.o xline.o inspstring.o dns.o base.o inspsocket.o configreader.o message.o $cmdobjs commands.o dnsqueue.o dynamic.o users.o modules.o wildcard.o helperfuncs.o hashcomp.o socket.o socketengine.o userprocess.o cull_list.o command_parse.o aes.o timer.o snomasks.o modes/modeclasses.a \$(MODULES)
+EOM
+ }
+
+ print FH <<EOM;
+
+cull_list.o: cull_list.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h ../include/users.h ../include/channels.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c cull_list.cpp
+
+snomasks.o: snomasks.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h ../include/channels.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c snomasks.cpp
+
+command_parse.o: command_parse.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c command_parse.cpp
+
+userprocess.o: userprocess.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c userprocess.cpp
+
+socketengine.o: $se.cpp socketengine.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h ../include/$se.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c socketengine.cpp $se.cpp
+
+hashcomp.o: hashcomp.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c hashcomp.cpp
+
+helperfuncs.o: helperfuncs.cpp ../include/base.h ../include/helperfuncs.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I/usr/local/include -L/usr/local/lib -I../include \$(FLAGS) -export-dynamic -c helperfuncs.cpp
+
+channels.o: channels.cpp ../include/base.h ../include/channels.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c channels.cpp
+
+mode.o: mode.cpp ../include/base.h ../include/mode.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h \$(RELCPPFILES)
+ \${MAKE} -C "modes" DIRNAME="src/modes" \$(MAKEARGS) CPPFILES="\$(CPPFILES)"
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c mode.cpp
+
+xline.o: xline.cpp ../include/base.h ../include/xline.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c xline.cpp
+
+inspstring.o: inspstring.cpp ../include/base.h ../include/inspstring.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspstring.cpp
+
+dns.o: dns.cpp ../include/base.h ../include/dns.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dns.cpp
+
+base.o: base.cpp ../include/base.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c base.cpp
+
+configreader.o: configreader.cpp ../include/base.h ../include/configreader.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c configreader.cpp
+
+message.o: message.cpp ../include/base.h ../include/message.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c message.cpp
+
+commands.o: commands.cpp ../include/base.h ../include/commands.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h $srcobjs
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c commands.cpp $cmdobjs
+
+dnsqueue.o: dnsqueue.cpp ../include/base.h ../include/dnsqueue.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dnsqueue.cpp
+
+dynamic.o: dynamic.cpp ../include/base.h ../include/dynamic.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dynamic.cpp
+
+users.o: users.cpp ../include/base.h ../include/users.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c users.cpp
+
+modules.o: modules.cpp ../include/base.h ../include/modules.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c modules.cpp
+
+wildcard.o: wildcard.cpp ../include/base.h ../include/wildcard.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c wildcard.cpp
+
+socket.o: socket.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c socket.cpp
+
+inspsocket.o: inspsocket.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspsocket.cpp
+
+aes.o: aes.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c aes.cpp
+
+timer.o: timer.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c timer.cpp
+
+EOM
+ foreach my $cmd (@cmdlist) {
+ print FH <<ITEM;
+cmd_$cmd.o: cmd_$cmd.cpp ../include/base.h ../include/modules.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h ../include/commands/cmd_$cmd.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
+ITEM
+ }
+ close(FH);
+}
+
+sub write_dynamic_makefile {
+
+ my $i = 0;
+ my @cmdlist = ();
+ opendir(DIRHANDLE, "src");
+ foreach $name (sort readdir(DIRHANDLE)) {
+ if ($name =~ /^cmd_(.+)\.cpp$/) {
+ $cmdlist[$i++] = $1;
+ }
+ }
+ closedir(DIRHANDLE);
+
+ my $cmdobjs = "";
+ my $srcobjs = "";
+ foreach my $cmd (@cmdlist) {
+ $cmdobjs = $cmdobjs . "cmd_$cmd.o ";
+ $srcobjs = $srcobjs . "cmd_$cmd.cpp ";
+ }
+
+if (($config{OSNAME} !~ /Linux/i) && ($config{HAS_EXECINFO} eq "1")) {
+ $extra = "-L/usr/local/lib -lexecinfo";
+} else {
+ $extra = "";
+}
+
+$se = "socketengine_select";
+if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
+ $se = "socketengine_kqueue";
+}
+elsif (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
+ $se = "socketengine_epoll";
+}
+
+ open(FH,">src/Makefile") or die("Could not write src/Makefile");
+ print FH <<EOM;
+# Insp Makefile :p
+#
+# (C) ChatSpike development team
+# Makefile by <Craig\@ChatSpike.net>
+# Makefile version 2 (dynamically linked core) by <brain\@inspircd.org>
+#
+
+CC = im a cheezeball
+
+CXXFLAGS = -I../include \${FLAGS}
+CPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* //' | grep -v svn)
+RELCPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* /modes\\//' | grep -v svn)
+
+all: libIRCDtimer.so libIRCDaes.so libIRCDcull_list.so libIRCDuserprocess.so libIRCDsocketengine.so libIRCDsocket.so libIRCDhash.so libIRCDchannels.so libIRCDmode.so libIRCDxline.so libIRCDstring.so libIRCDasyncdns.so libIRCDbase.so libIRCDconfigreader.so libIRCDinspsocket.so libIRCDmessage.so $cmdobjs libIRCDcommands.so libIRCDdnsqueue.so libIRCDdynamic.so libIRCDusers.so libIRCDmodules.so libIRCDwildcard.so libIRCDhelper.so libIRCDcommand_parse.so libIRCDsnomasks.so inspircd
+
+inspircd: inspircd.cpp ../include/base.h ../include/channels.h ../include/inspircd.h ../include/channels.h ../include/globals.h ../include/inspircd_config.h ../include/socket.h libIRCDtimer.so libIRCDaes.so libIRCDcull_list.so libIRCDuserprocess.so libIRCDsocketengine.so libIRCDsocket.so libIRCDhash.so libIRCDchannels.so libIRCDmode.so libIRCDxline.so libIRCDstring.so libIRCDasyncdns.so libIRCDbase.so libIRCDconfigreader.so libIRCDinspsocket.so libIRCDmessage.so $cmdobjs libIRCDsnomasks.so libIRCDcommands.so libIRCDdnsqueue.so libIRCDdynamic.so libIRCDusers.so libIRCDmodules.so libIRCDwildcard.so libIRCDhelper.so libIRCDcommand_parse.so
+ \$(CC) -I../include $extra -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath -Wl,$config{LIBRARY_DIR} \$(FLAGS) -rdynamic -L. inspircd.cpp -o inspircd \$(LDLIBS) libIRCDchannels.so libIRCDmode.so libIRCDxline.so libIRCDstring.so libIRCDasyncdns.so libIRCDbase.so libIRCDconfigreader.so libIRCDinspsocket.so libIRCDmessage.so libIRCDcommands.so libIRCDdnsqueue.so libIRCDdynamic.so libIRCDusers.so libIRCDmodules.so libIRCDwildcard.so libIRCDhelper.so libIRCDhash.so libIRCDsocket.so libIRCDsocketengine.so libIRCDuserprocess.so libIRCDcull_list.so libIRCDcommand_parse.so libIRCDaes.so libIRCDtimer.so libIRCDsnomasks.so
+
+libIRCDsocketengine.so: $se.cpp socketengine.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h ../include/$se.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c socketengine.cpp $se.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDsocketengine.so socketengine.o $se.o
+
+libIRCDsnomasks.so: snomasks.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h ../include/channels.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c snomasks.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDsnomasks.so snomasks.o
+
+libIRCDcommand_parse.so: command_parse.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c command_parse.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDcommand_parse.so command_parse.o
+
+libIRCDcull_list.so: cull_list.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h ../include/users.h ../include/channels.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c cull_list.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDcull_list.so cull_list.o
+
+libIRCDuserprocess.so: userprocess.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c userprocess.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDuserprocess.so userprocess.o
+
+libIRCDhash.so: hashcomp.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c hashcomp.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDhash.so hashcomp.o
+
+libIRCDhelper.so: helperfuncs.cpp ../include/base.h ../include/helperfuncs.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I/usr/local/include -L/usr/local/lib -I../include \$(FLAGS) -export-dynamic -c helperfuncs.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDhelper.so helperfuncs.o
+
+libIRCDchannels.so: channels.cpp ../include/base.h ../include/channels.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c channels.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDchannels.so channels.o
+
+libIRCDmode.so: mode.cpp ../include/base.h ../include/mode.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h \$(RELCPPFILES)
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c mode.cpp
+ \${MAKE} -C "modes" DIRNAME="src/modes" \$(MAKEARGS) CPPFILES="\$(CPPFILES)"
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDmode.so mode.o modes/modeclasses.a
+
+libIRCDxline.so: xline.cpp ../include/base.h ../include/xline.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c xline.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDxline.so xline.o
+
+libIRCDstring.so: inspstring.cpp ../include/base.h ../include/inspstring.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspstring.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDstring.so inspstring.o
+
+libIRCDasyncdns.so: dns.cpp ../include/base.h ../include/dns.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dns.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDasyncdns.so dns.o
+
+libIRCDbase.so: base.cpp ../include/base.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c base.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDbase.so base.o
+
+libIRCDconfigreader.so: configreader.cpp ../include/base.h ../include/configreader.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c configreader.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDconfigreader.so configreader.o
+
+libIRCDmessage.so: message.cpp ../include/base.h ../include/message.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c message.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDmessage.so message.o
+
+libIRCDcommands.so: commands.cpp ../include/base.h ../include/commands.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h $srcobjs
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c commands.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDcommands.so commands.o $cmdobjs
+
+libIRCDdnsqueue.so: dnsqueue.cpp ../include/base.h ../include/dnsqueue.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dnsqueue.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDdnsqueue.so dnsqueue.o
+
+libIRCDdynamic.so: dynamic.cpp ../include/base.h ../include/dynamic.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dynamic.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDdynamic.so dynamic.o
+
+libIRCDusers.so: users.cpp ../include/base.h ../include/users.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c users.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDusers.so users.o
+
+libIRCDmodules.so: modules.cpp ../include/base.h ../include/modules.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c modules.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDmodules.so modules.o
+
+libIRCDwildcard.so: wildcard.cpp ../include/base.h ../include/wildcard.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c wildcard.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDwildcard.so wildcard.o
+
+libIRCDsocket.so: socket.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c socket.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDsocket.so socket.o
+
+libIRCDinspsocket.so: inspsocket.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspsocket.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDinspsocket.so inspsocket.o
+
+libIRCDaes.so: aes.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c aes.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDaes.so aes.o
+
+libIRCDtimer.so: timer.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c timer.cpp
+ \$(CC) -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDtimer.so timer.o
+
+EOM
+ foreach my $cmd (@cmdlist) {
+ print FH <<ITEM;
+cmd_$cmd.o: cmd_$cmd.cpp ../include/base.h ../include/modules.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h ../include/commands/cmd_$cmd.h
+ \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
+
+ITEM
+ }
+ close(FH);
+}
projects / user / henk / code / inspircd.git / blobdiff