#!/usr/bin/perl
-
+###################################################
# InspIRCd Configuration Script
#
-# Copyright 2002-2007 The ChatSpike Development Team
-# <brain@chatspike.net>
-# <Craig@chatspike.net>
+# Copyright 2002-2010 The InspIRCd Development Team
+# http://wiki.inspircd.org/Credits
#
-# [14:21] Brain: <matrix impression> i know perl-fu!
+# Licensed under GPL, please see the COPYING file
+# for more information
#
# $Id$
#
-########################################
+###################################################
+
+BEGIN {
+ require 5.8.0;
+}
+
+use strict;
+use warnings FATAL => qw(all);
+use Data::Dumper;
+BEGIN {
+ $Data::Dumper::Sortkeys = 1;
+ $Data::Dumper::Useqq = 1;
+};
-require 5.6.0;
+use File::Copy ();
use Socket;
use Cwd;
use Getopt::Long;
+# Utility functions for our buildsystem
+use make::utilities;
+use make::configure;
+use make::gnutlscert;
+use make::opensslcert;
+
+###############################################################################################
+#
+# NON-EDITABLE VARIABLES
+#
+###############################################################################################
+
+our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_ports,
+ $opt_epoll, $opt_kqueue, $opt_noports, $opt_noepoll, $opt_nokqueue,
+ $opt_noipv6, $opt_maxbuf, $opt_disable_debug, $opt_freebsd_port,
+ $opt_system, $opt_uid);
+
+our ($opt_cc, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir);
+
+sub list_extras ();
+
+sub enable_extras (@);
+
+sub disable_extras (@);
+
+my @opt_enableextras;
+my @opt_disableextras;
+
GetOptions (
'enable-gnutls' => \$opt_use_gnutls,
+ 'rebuild' => \$opt_rebuild,
+ 'system' => \$opt_system,
+ 'uid=s' => \$opt_uid,
'enable-openssl' => \$opt_use_openssl,
'disable-interactive' => \$opt_nointeractive,
- 'with-nick-length=i' => \$opt_nick_length,
- 'with-channel-length=i' => \$opt_chan_length,
- 'with-max-channels=i' => \$opt_maxchans,
- 'with-max-oper-channels=i' => \$opt_opermaxchans,
- 'with-max-clients=i' => \$opt_maxclients,
+ 'enable-ports' => \$opt_ports,
'enable-epoll' => \$opt_epoll,
'enable-kqueue' => \$opt_kqueue,
+ 'disable-ports' => \$opt_noports,
'disable-epoll' => \$opt_noepoll,
'disable-kqueue' => \$opt_nokqueue,
- 'enable-ipv6' => \$opt_ipv6,
- 'enable-remote-ipv6' => \$opt_ipv6links,
- 'disable-remote-ipv6' => \$opt_noipv6links,
+ 'disable-ipv6' => \$opt_noipv6,
'with-cc=s' => \$opt_cc,
- 'with-ident-length=i' => \$opt_ident,
- 'with-quit-length=i' => \$opt_quit,
- 'with-topic-length=i' => \$opt_topic,
- 'with-kick-length=i' => \$opt_kick,
- 'with-gecos-length=i' => \$opt_gecos,
- 'with-away-length=i' => \$opt_away,
- 'with-max-modes=i' => \$opt_modes,
+ 'with-maxbuf=i' => \$opt_maxbuf,
+ 'enable-freebsd-ports-openssl' => \$opt_freebsd_port,
'prefix=s' => \$opt_base_dir,
'config-dir=s' => \$opt_config_dir,
'module-dir=s' => \$opt_module_dir,
'binary-dir=s' => \$opt_binary_dir,
- 'library-dir=s' => \$opt_library_dir,
'disable-debuginfo' => sub { $opt_disable_debug = 1 },
'help' => sub { showhelp(); },
- 'modupdate' => sub { modupdate(); },
'update' => sub { update(); },
'svnupdate' => sub { svnupdate(); },
'clean' => sub { clean(); },
+ 'list-extras' => sub { list_extras; exit 0; }, # This, --enable-extras, and --disable-extras are for non-interactive managing.
+ 'enable-extras=s@' => \@opt_enableextras, # ^
+ 'disable-extras=s@' => \@opt_disableextras, # ^
+ 'generate-openssl-cert' => sub { make_openssl_cert(); exit(0); },
+ 'generate-gnutls-cert' => sub { make_gnutls_cert(); exit(0); }
);
-my $non_interactive = (
- (defined $opt_library_dir) ||
+if (scalar(@opt_enableextras) + scalar(@opt_disableextras) > 0) {
+ @opt_enableextras = split /,/, join(',', @opt_enableextras);
+ @opt_disableextras = split /,/, join(',', @opt_disableextras);
+ enable_extras(@opt_enableextras);
+ disable_extras(@opt_disableextras);
+ list_extras;
+ print "Remember: YOU are responsible for making sure any libraries needed have been installed!\n";
+ exit 0;
+}
+
+our $interactive = !(
(defined $opt_base_dir) ||
(defined $opt_config_dir) ||
(defined $opt_module_dir) ||
(defined $opt_base_dir) ||
(defined $opt_binary_dir) ||
(defined $opt_nointeractive) ||
- (defined $opt_away) ||
- (defined $opt_gecos) ||
- (defined $opt_kick) ||
- (defined $opt_maxclients) ||
- (defined $opt_modes) ||
- (defined $opt_topic) ||
- (defined $opt_quit) ||
- (defined $opt_ident) ||
(defined $opt_cc) ||
- (defined $opt_ipv6) ||
- (defined $opt_ipv6links) ||
- (defined $opt_noipv6links) ||
+ (defined $opt_noipv6) ||
(defined $opt_kqueue) ||
(defined $opt_epoll) ||
- (defined $opt_maxchans) ||
- (defined $opt_opermaxchans) ||
- (defined $opt_chan_length) ||
- (defined $opt_nick_length) ||
+ (defined $opt_ports) ||
(defined $opt_use_openssl) ||
(defined $opt_nokqueue) ||
(defined $opt_noepoll) ||
- (defined $opt_use_gnutls)
+ (defined $opt_noports) ||
+ (defined $opt_maxbuf) ||
+ (defined $opt_system) ||
+ (defined $opt_uid) ||
+ (defined $opt_use_gnutls) ||
+ (defined $opt_freebsd_port)
);
-my $interactive = !$non_interactive;
-
-chomp($topdir = getcwd());
-$this = resolve_directory($topdir); # PWD, Regardless.
-@modlist = (); # Declare for Module List..
-%config = (); # Initiate Configuration Hash..
-$config{ME} = resolve_directory($topdir); # Present Working Directory
+chomp(our $topdir = getcwd());
+our $this = resolve_directory($topdir); # PWD, Regardless.
+our @modlist = (); # Declare for Module List..
+our %config = (); # Initiate Configuration Hash..
+$config{ME} = resolve_directory($topdir); # Present Working Directory
-$config{BASE_DIR} = $config{ME};
+$config{BASE_DIR} = $config{ME}."/run";
-if (defined $opt_base_dir)
-{
+if (defined $opt_base_dir) {
$config{BASE_DIR} = $opt_base_dir;
+} elsif (defined $opt_system || defined $opt_uid) {
+ $config{BASE_DIR} = '/var/lib/inspircd';
}
-$config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Directory
-$config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
-$config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
-$config{LIBRARY_DIR} = resolve_directory($config{BASE_DIR}."/lib"); # Library Directory
+if (defined $opt_system || defined $opt_uid) {
+ $config{UID} = $opt_uid || 'ircd';
+ $config{CONFIG_DIR} = '/etc/inspircd';
+ $config{MODULE_DIR} = '/usr/lib/inspircd';
+ $config{BINARY_DIR} = '/usr/sbin/';
+ $config{BUILD_DIR} = resolve_directory($config{ME}."/build"); # Build Directory
+} else {
+ $config{UID} = $<;
+ $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Directory
+ $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
+ $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
+ $config{BUILD_DIR} = resolve_directory($config{ME}."/build"); # Build Directory
+}
-if (defined $opt_config_dir)
-{
+if (defined $opt_config_dir) {
$config{CONFIG_DIR} = $opt_config_dir;
}
-if (defined $opt_module_dir)
-{
+if (defined $opt_module_dir) {
$config{MODULE_DIR} = $opt_module_dir;
}
-if (defined $opt_binary_dir)
-{
+if (defined $opt_binary_dir) {
$config{BINARY_DIR} = $opt_binary_dir;
}
-if (defined $opt_library_dir)
+chomp($config{HAS_GNUTLS} = `pkg-config --modversion gnutls 2>/dev/null | cut -c 1,2,3`); # GNUTLS Version.
+
+if (defined $opt_freebsd_port)
{
- $config{LIBRARY_DIR} = $opt_library_dir;
+ chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`);
+ chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`);
+ $config{USE_FREEBSD_BASE_SSL} = "n";
}
-chomp($config{HAS_GNUTLS} = `libgnutls-config --version 2>/dev/null | cut -c 1,2,3`); # GNUTLS Version.
-chomp($config{HAS_OPENSSL} = `openssl version 2>/dev/null`); # Openssl version
+else
+{
+ if ($^O eq "freebsd")
+ {
+ # default: use base ssl
+ chomp($config{HAS_OPENSSL} = `openssl version | cut -d ' ' -f 2`); # OpenSSL version, freebsd specific
+ chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`); # Port version, may be different
+ }
+ else
+ {
+ chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version, others
+ $config{HAS_OPENSSL_PORT} = "";
+ }
+}
+
+chomp(our $gnutls_ver = $config{HAS_GNUTLS});
+chomp(our $openssl_ver = $config{HAS_OPENSSL});
$config{USE_GNUTLS} = "n";
if (defined $opt_use_gnutls)
{
- $config{USE_GNUTLS} = "y"; # Use gnutls.
+ $config{USE_GNUTLS} = "y"; # Use gnutls.
}
-$config{USE_OPENSSL} = "n"; # Use openssl.
+$config{USE_OPENSSL} = "n"; # Use openssl.
if (defined $opt_use_openssl)
{
$config{USE_OPENSSL} = "y";
}
-# no, let's not change these.
-$config{OPTIMITEMP} = "0"; # Default Optimisation Value
-if (!defined $opt_disable_debug)
-{
- $config{OPTIMISATI} = "-g"; # Optimisation Flag
-}
-else
-{
- $config{OPTIMISATI} = ""; # DEBUGGING OFF!
+if (!defined $opt_disable_debug) {
+ $config{OPTIMISATI} = "-g1"; # Optimisation Flag
+} else {
+ $config{OPTIMISATI} = "-O2";
}
-$config{NICK_LENGT} = "31"; # Default Nick Length
-if (defined $opt_nick_length)
-{
- $config{NICK_LENGT} = $opt_nick_length;
-}
-$config{CHAN_LENGT} = "64"; # Default Channel Name Length
-if (defined $opt_chan_length)
-{
- $config{CHAN_LENGT} = $opt_chan_length;
-}
-$config{MAX_CHANNE} = "20"; # Default Max. Channels per user
-if (defined $opt_maxchans)
-{
- $config{MAX_CHANNE} = $opt_maxchans;
-}
-$config{MAX_OPERCH} = "60"; # Default Max. Channels per oper
-if (defined $opt_opermaxchans)
-{
- $config{MAX_OPERCH} = $opt_opermaxchans;
-}
-$config{MAXI_MODES} = "20"; # Default Max. Number of Modes set at once.
-if (defined $opt_modes)
-{
- $config{MAXI_MODES} = $opt_modes;
-}
-$config{HAS_STRLCPY} = "false"; # strlcpy Check.
-$config{HAS_STDINT} = "false"; # stdint.h check
-$config{USE_KQUEUE} = "y"; # kqueue enabled
-if (defined $opt_kqueue)
-{
- $config{USE_KQUEUE} = "y";
-}
-if (defined $opt_nokqueue)
-{
+$config{HAS_STRLCPY} = "false"; # strlcpy Check.
+$config{HAS_STDINT} = "false"; # stdint.h check
+$config{USE_KQUEUE} = "y"; # kqueue enabled
+if (defined $opt_nokqueue) {
$config{USE_KQUEUE} = "n";
}
-$config{USE_EPOLL} = "y"; # epoll enabled
-if (defined $opt_epoll)
-{
- $config{USE_EPOLL} = "y";
-}
+$config{USE_POLL} = "y"; # poll enabled
+$config{USE_EPOLL} = "y"; # epoll enabled
if (defined $opt_noepoll)
{
$config{USE_EPOLL} = "n";
}
-$config{IPV6} = "n"; # IPv6 support (experimental)
-if (defined $opt_ipv6)
+$config{USE_PORTS} = "y"; # epoll enabled
+if (defined $opt_noports)
{
- $config{IPV6} = "y";
+ $config{USE_PORTS} = "n";
}
-$config{SUPPORT_IP6LINKS} = "y"; # IPv4 supporting IPv6 links (experimental)
-if (defined $opt_ipv6links)
+$config{IPV6} = "y"; # IPv6 support
+if (defined $opt_noipv6)
{
- $config{SUPPORT_IP6LINKS} = "y";
-}
-if (defined $opt_noipv6links)
+ $config{IPV6} = "n";
+}
+$config{_SOMAXCONN} = SOMAXCONN; # Max connections in accept queue
+$config{OSNAME} = $^O; # Operating System Name
+$config{IS_DARWIN} = "NO"; # Is OSX?
+$config{STARTSCRIPT} = "inspircd"; # start script?
+$config{DESTINATION} = "BASE"; # Is target path.
+$config{EXTRA_DIR} = ""; # Is empty.
+if ($config{OSNAME} =~ /darwin/i)
{
- $config{SUPPORT_IP6LINKS} = "n";
+ $config{IS_DARWIN} = "YES";
+ $config{STARTSCRIPT} = "org.inspircd.plist"; # start script for OSX.
}
-$config{STATIC_LINK} = "no"; # are doing static modules?
-chomp($config{MAX_CLIENT_T} = `sh -c \"ulimit -n\"`); # FD Limit
-chomp($config{MAX_DESCRIPTORS} = `sh -c \"ulimit -n\"`); # Hard FD Limit
-chomp($config{GCCVER} = `g++ -dumpversion | cut -c 1`); # Major GCC Version
-$config{_SOMAXCONN} = SOMAXCONN; # Max connections in accept queue
-$config{OSNAME} = $^O; # Operating System Name
$config{CC} = "g++"; # C++ compiler
if (defined $opt_cc)
{
$config{CC} = $opt_cc;
}
-$exec = $config{CC} . " -dumpversion | cut -c 1";
-chomp($config{GCCVER} = `$exec`); # Major GCC Version
-$config{MAKEORDER} = "ircd mods"; # build order
-$config{STATICLIBS} = ""; # library archive path
-$config{MAX_IDENT} = "12"; # max ident size
-$config{MAX_QUIT} = "255"; # max quit message size
-$config{MAX_TOPIC} = "307"; # max topic size
-$config{MAX_KICK} = "255"; # max kick message size
-$config{MAX_GECOS} = "128"; # max GECOS size
-$config{MAX_AWAY} = "200"; # max AWAY size
-if (defined $opt_ident)
-{
- $config{MAX_IDENT} = $opt_ident;
-}
-if (defined $opt_quit)
-{
- $config{MAX_QUIT} = $opt_quit;
-}
-if (defined $opt_topic)
-{
- $config{MAX_TOPIC} = $opt_topic;
-}
-if (defined $opt_kick)
-{
- $config{MAX_KICK} = $opt_kick;
-}
-if (defined $opt_gecos)
-{
- $config{MAX_GECOS} = $opt_gecos;
-}
-if (defined $opt_away)
-{
- $config{MAX_AWAY} = $opt_away;
-}
+our $exec = $config{CC} . " -dumpversion | cut -c 1";
+chomp($config{GCCVER} = `$exec`); # Major GCC Version
+$exec = $config{CC} . " -dumpversion | cut -c 3";
+chomp($config{GCCMINOR} = `$exec`);
+$config{MAXBUF} = "512"; # Max buffer size
-$no_svn = 0;
-
-$config{HAS_OPENSSL} =~ /OpenSSL ([-[:digit:].]+)([a-z])?(\-[a-z][0-9])? (\w{3}|[0-9]+) (\w{3}|[0-9]+) [0-9]{4}/;
-$config{HAS_OPENSSL} = $1;
+if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)([a-z])?(\-[a-z][0-9])?$/) {
+ $config{HAS_OPENSSL} = $1;
+} else {
+ $config{HAS_OPENSSL} = "";
+}
-if ($config{GCCVER} eq "") {
+if (($config{GCCVER} eq "") || ($config{GCCMINOR} eq "")) {
print $config{CC} . " was not found! You require g++ (the GNU C++ compiler, part of GCC) to build InspIRCd!\n";
exit;
}
-# Minihack! Convert Cygwin to 'Cyg-Static' so i can
-# Keep my dynamic module experiments here for later
-# concideration!
-
-if ($config{OSNAME} =~ /CYGWIN/i)
-{
- $config{OSNAME} = "CYG-STATIC";
-}
-
-if (!$config{MAX_CLIENT_T}) {
- $config{MAX_CLIENT_T} = 1024; # Set a reasonable 'Default'
- $fd_scan_fail = "true"; # Used Later
-}
-
# Get and Set some important vars..
getmodules();
sub clean
{
- system("rm -rf .config.cache");
+ unlink(".config.cache");
}
+our ($has_epoll, $has_ports, $has_kqueue) = (0, 0, 0);
+
sub update
{
- chomp($topdir = getcwd());
- $this = resolve_directory($topdir); # PWD, Regardless.
- getmodules();
- # Does the cache file exist?
- if (!getcache()) {
- # No, No it doesn't.. *BASH*
- print "You have not run ./configure before. Please do this before trying to run the update script.\n";
- exit 0;
- } else {
- # We've Loaded the cache file and all our variables..
- print "Updating Files..\n";
- getosflags();
- if ($opt_disable_debug == 1)
- {
- print "Disabling debug information (-g).\n";
- $config{OPTIMISATI} = "";
- getosflags();
+ eval {
+ chomp($topdir = getcwd());
+ $this = resolve_directory($topdir); # PWD, Regardless.
+ getmodules();
+ # Does the cache file exist?
+ if (!getcache()) {
+ # No, No it doesn't.. *BASH*
+ print "You have not run ./configure before. Please do this before trying to run the update script.\n";
+ exit 0;
+ } else {
+ # We've Loaded the cache file and all our variables..
+ print "Updating files...\n";
+ if (defined($opt_disable_debug) && $opt_disable_debug == 1)
+ {
+ print "Disabling debug information (-g).\n";
+ $config{OPTIMISATI} = "";
+ }
+ $has_epoll = $config{HAS_EPOLL};
+ $has_ports = $config{HAS_PORTS};
+ $has_kqueue = $config{HAS_KQUEUE};
+ writefiles(1);
+ makecache();
+ print "Complete.\n";
+ exit;
}
- $has_epoll = $config{HAS_EPOLL};
- $has_kqueue = $config{HAS_KQUEUE};
- writefiles(1);
- print "Complete.\n";
- exit;
+ };
+ if ($@)
+ {
+ print "Configure update failed: $@\n";
}
+ exit;
}
-sub modupdate
-{
- chomp($topdir = getcwd());
- $this = resolve_directory($topdir); # PWD, Regardless.
- getmodules();
- # Does the cache file exist?
- if (!getcache()) {
- # No, No it doesn't.. *BASH*
- print "You have not run ./configure before. Please do this before trying to run the update script.\n";
- exit 0;
- } else {
- # We've Loaded the cache file and all our variables..
- print "Updating Files..\n";
- getosflags();
- $has_epoll = $config{HAS_EPOLL};
- $has_kqueue = $config{HAS_KQUEUE};
- writefiles(0);
- print "Complete.\n";
- exit;
- }
-}
-
-
-
sub svnupdate
{
my $fail = 0;
open(FH,"<.svn/entries") or $fail = 1;
if ($fail) {
print "This is not an SVN copy of InspIRCd.\n";
- exit;
+ exit 1;
+ }
+ else
+ {
+ close(FH);
+ }
+ open my $fd, "-|", "svn update";
+ my $configurechanged = 0; # Needs ./configure -update
+ my $rootincchanged = 0;
+ my @conflicted = ();
+ while (defined(my $line = <$fd>))
+ {
+ my ($action, $file);
+ print $line;
+ $line =~ m/^([ADUCG])\s+(.*)$/ or next;
+ ($action, $file) = ($1, $2);
+ if ($action eq "C")
+ {
+ push @conflicted, $file;
+ if ($file eq "configure")
+ {
+ $configurechanged = 1;
+ }
+ elsif ($file =~ m/^\..*\.inc$/)
+ {
+ $rootincchanged = 1;
+ }
+ }
+ elsif ($action eq "U" || $action eq "G")
+ {
+ if ($file eq "configure")
+ {
+ $configurechanged = 1;
+ }
+ elsif ($file =~ m/^\..*\.inc$/)
+ {
+ $rootincchanged = 1;
+ }
+ }
}
- system("svn update");
- system("perl configure -update");
- if ($ARGV[1] eq "rebuild") {
+ unless (close $fd) # close() waits for exit and returns false if the command failed
+ {
+ if ($! == 0)
+ {
+ print STDERR "Problem updating from SVN, please check above for errors\n";
+ }
+ else
+ {
+ print STDERR "Failed to run SVN: $!\n";
+ }
+ exit 1;
+ }
+ if (scalar(@conflicted) > 0)
+ {
+ print STDERR "\e[0;33;1mERROR:\e[0m You have local modifications which conflicted with the updates from SVN\n";
+ print STDERR "Configure is not able to complete the update. Please resolve these conflicts, then run ./configure -update\n";
+ print "Conflicted files: " . join ", ", @conflicted . "\n";
+ exit 1;
+ }
+ if ($configurechanged)
+ {
+ system("perl configure -update");
+ }
+ else
+ {
+ print "No need to update Makefiles.\n";
+ }
+ if (defined $opt_rebuild) {
system("make install");
}
exit;
}
+sub test_compile {
+ my $feature = shift;
+ my $fail = 0;
+ $fail ||= system "$config{CC} -o test_$feature make/check_$feature.cpp >/dev/null 2>&1";
+ $fail ||= system "./test_$feature";
+ unlink "test_$feature";
+ return !$fail;
+}
+
print "Running non-interactive configure...\n" unless $interactive;
print "Checking for cache from previous configure... ";
-print ((getcache() eq "true") ? "found\n" : "not found\n");
-print "Checking operating system version... ";
-print getosflags() . "\n";
-
-if (defined $opt_maxclients)
-{
- $config{MAX_CLIENT} = $opt_maxclients;
-}
+print ((!getcache()) ? "not found\n" : "found\n");
+$config{SYSTEM} = lc $^O;
+print "Checking operating system version... $config{SYSTEM}\n";
-if (!$config{MAX_CLIENT}) {
- # If the cache hasn't set the max clients, copy the variable of MAX_CLIENT_T, this
- # allows us to keep _T for testing purposes. (ie. "Are you sure you want to go
- # higher than the found value" :))
- $config{MAX_CLIENT} = $config{MAX_CLIENT_T};
-}
+$exec = $config{CC} . " -dumpversion | cut -c 1";
+chomp($config{GCCVER} = `$exec`); # Major GCC Version
+$exec = $config{CC} . " -dumpversion | cut -c 3";
+chomp($config{GCCMINOR} = `$exec`);
printf "Checking if stdint.h exists... ";
$config{HAS_STDINT} = "true";
-my $fail = 0;
+our $fail = 0;
open(STDINT, "</usr/include/stdint.h") or $config{HAS_STDINT} = "false";
if ($config{HAS_STDINT} eq "true") {
close(STDINT);
print "yes\n" if $config{HAS_STDINT} eq "true";
print "no\n" if $config{HAS_STDINT} eq "false";
-
printf "Checking if strlcpy exists... ";
# Perform the strlcpy() test..
$config{HAS_STRLCPY} = "false";
-my $fail = 0;
+$fail = 0;
open(STRLCPY, "</usr/include/string.h") or $fail = 1;
if (!$fail) {
- while (chomp($line = <STRLCPY>)) {
+ while (defined(my $line = <STRLCPY>)) {
+ chomp($line);
# try and find the delcaration of:
# size_t strlcpy(...)
if ($line =~ /size_t(\0x9|\s)+strlcpy/) {
print "yes\n" if $config{HAS_STRLCPY} eq "true";
print "no\n" if $config{HAS_STRLCPY} eq "false";
-
printf "Checking if kqueue exists... ";
$has_kqueue = 0;
$fail = 0;
open(KQUEUE, "</usr/include/sys/event.h") or $fail = 1;
if (!$fail) {
- while (chomp($line = <KQUEUE>)) {
- # try and find the delcaration of:
+ while (defined(my $line = <KQUEUE>)) {
+ chomp($line);
+ # try and find the delcaration of:
# int kqueue(void);
if ($line =~ /int(\0x9|\s)+kqueue/) {
$has_kqueue = 1;
print "yes\n" if $has_kqueue == 1;
print "no\n" if $has_kqueue == 0;
-printf "Checking if epoll exists... ";
-$has_epoll = 0;
-$fail = 0;
-open(EPOLL, "</usr/include/sys/epoll.h") or $fail = 1;
-if (!$fail) {
- $has_epoll = 1;
- close(EPOLL);
-}
-if ($has_epoll) {
+printf "Checking for epoll support... ";
+$has_epoll = test_compile('epoll');
+print $has_epoll ? "yes\n" : "no\n";
+
+printf "Checking for eventfd support... ";
+$config{HAS_EVENTFD} = test_compile('eventfd') ? 'true' : 'false';
+print $config{HAS_EVENTFD} eq 'true' ? "yes\n" : "no\n";
+
+printf "Checking if Solaris I/O completion ports are available... ";
+$has_ports = 0;
+our $system = `uname -s`;
+chomp ($system);
+$has_ports = 1 if ($system eq "SunOS");
+
+if ($has_ports) {
my $kernel = `uname -r`;
chomp($kernel);
- if (($kernel =~ /2\.0/) || ($kernel =~ /2\.2/) || ($kernel =~ /2\.4/)) {
- $has_epoll = 0;
+ if (($kernel !~ /^5\.1./)) {
+ $has_ports = 0;
}
}
-print "yes\n" if $has_epoll == 1;
-print "no\n" if $has_epoll == 0;
-
-if (($config{OSNAME} =~ /CYGWIN/) || ($config{OSNAME} eq "CYG-STATIC")) {
- $config{HAS_STRLCPY} = "true";
-}
+print "yes\n" if $has_ports == 1;
+print "no\n" if $has_ports == 0;
$config{HAS_EPOLL} = $has_epoll;
-$config{HAS_KQUEUE} = $has_kqueue;
+$config{HAS_KQUEUE} = $has_kqueue;
printf "Checking for libgnutls... ";
-if (($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS} >= 1.2) || ($config{HAS_GNUTLS} eq "y"))) {
- print "yes\n";
- $config{HAS_GNUTLS} = "y";
+if (defined($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS}) || ($config{HAS_GNUTLS} eq "y"))) {
+ if (defined($gnutls_ver) && ($gnutls_ver ne "")) {
+ print "yes\n";
+ $config{HAS_GNUTLS} = "y";
+ } else {
+ print "no\n";
+ $config{HAS_GNUTLS} = "n";
+ }
} else {
print "no\n";
$config{HAS_GNUTLS} = "n";
}
printf "Checking for openssl... ";
-if (($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL} >= 0.8) || ($config{HAS_OPENSSL} eq "y"))) {
- print "yes\n";
- $config{HAS_OPENSSL} = "y";
+if (defined($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL}) || ($config{HAS_OPENSSL} eq "y"))) {
+ if (defined($openssl_ver) && ($openssl_ver ne "")) {
+ print "yes\n";
+ $config{HAS_OPENSSL} = "y";
+ } else {
+ print "no\n";
+ $config{HAS_OPENSSL} = "n";
+ }
} else {
print "no\n";
$config{HAS_OPENSSL} = "n";
}
+printf "Checking if you are running an ancient, unsupported OS... ";
+if ($config{OSNAME} =~ /FreeBSD/i)
+{
+ my $version = `uname -r`;
+ if ($version =~ /^4\./)
+ {
+ print "yes.\n";
+ print "FreeBSD 4.x is no longer supported. By ANYONE.\n";
+ print "To build, you will need to add the following to CXXFLAGS:\n";
+ print "\t-L/usr/local/lib -lgnugetopt -DHAVE_DECL_GETOPT=1\n";
+ }
+ else
+ {
+ print "no ($version)\n";
+ }
+}
+else
+{
+ print "no ($config{OSNAME})\n";
+}
+
################################################################################
-# BEGIN INTERACTIVE PART #
+# BEGIN INTERACTIVE PART #
################################################################################
# Clear the Screen..
if ($interactive)
{
- system("clear");
- $wholeos = $^O;
+ print "\e[2J\e[0G\e[0d"; # J = Erase in Display, 2 = Entire Screen, (G, d) = Move cursor to (..,..)
+ my $wholeos = $^O;
my $rev = getrevision();
# Display Introduction Message..
- print "
-Welcome to the \033[1mInspIRCd\033[0m Configuration program! (\033[1minteractive mode\033[0m)
-\033[1mPackage maintainers: Type ./configure --help for non-interactive help\033[0m
+ print <<"STOP" ;
+Welcome to the \e[1mInspIRCd\e[0m Configuration program! (\e[1minteractive mode\e[0m)
+\e[1mPackage maintainers: Type ./configure --help for non-interactive help\e[0m
*** If you are unsure of any of these values, leave it blank for ***
*** standard settings that will work, and your server will run ***
*** using them. Please consult your IRC network admin if in doubt. ***
-Press \033[1m<RETURN>\033[0m to accept the default for any option, or enter
-a new value. Please note: You will \033[1mHAVE\033[0m to read the docs
+Press \e[1m<RETURN>\e[0m to accept the default for any option, or enter
+a new value. Please note: You will \e[1mHAVE\e[0m to read the docs
dir, otherwise you won't have a config file!
-Your operating system is: \033[1;32m$config{OSNAME}\033[0m ($wholeos)
-Maximum file descriptors: \033[1;32m$config{MAX_CLIENT_T}\033[0m
-Your InspIRCd revision ID is \033[1;32mr$rev\033[0m";
+Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
+Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
+STOP
if ($rev eq "r0") {
print " (Non-SVN build)";
}
print ".\n\n";
$config{CHANGE_COMPILER} = "n";
- print "I have detected the following compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.x\033[0m)\n";
+ print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
- print "\033[1;32mIMPORTANT!\033[0m A GCC 2.x compiler has been detected, and
+ print "\e[1;32mIMPORTANT!\e[0m A GCC 2.x compiler has been detected, and
should NOT be used. You should probably specify a newer compiler.\n\n";
- yesno(CHANGE_COMPILER,"Do you want to change the compiler?");
+ yesno('CHANGE_COMPILER',"Do you want to change the compiler?");
if ($config{CHANGE_COMPILER} =~ /y/i) {
print "What command do you want to use to invoke your compiler?\n";
- print "[\033[1;32m$config{CC}\033[0m] -> ";
+ print "[\e[1;32m$config{CC}\e[0m] -> ";
chomp($config{CC} = <STDIN>);
if ($config{CC} eq "") {
$config{CC} = "g++";
}
- chomp($foo = `$config{CC} -dumpversion | cut -c 1`);
+ chomp(my $foo = `$config{CC} -dumpversion | cut -c 1`);
if ($foo ne "") {
chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
- print "Queried compiler: \033[1;32m$config{CC}\033[0m (version \033[1;32m$config{GCCVER}.x\033[0m)\n";
+ chomp($config{GCCMINOR} = `$config{CC} -dumpversion | cut -c 3`);
+ print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
if ($config{GCCVER} < 3) {
- print "\033[1;32mGCC 2.x WILL NOT WORK!\033[0m. Let's try that again, shall we?\n";
+ print "\e[1;32mGCC 2.x WILL NOT WORK!\e[0m. Let's try that again, shall we?\n";
}
}
else {
- print "\033[1;32mWARNING!\033[0m Could not execute the compiler you specified. You may want to try again.\n";
+ print "\e[1;32mWARNING!\e[0m Could not execute the compiler you specified. You may want to try again.\n";
}
}
}
my $tmpbase = $config{BASE_DIR};
dir_check("do you wish to install the InspIRCd base", "BASE_DIR");
if ($tmpbase ne $config{BASE_DIR}) {
- $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Dir
- $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
- $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
- $config{LIBRARY_DIR} = resolve_directory($config{BASE_DIR}."/lib"); # Library Directory
+ $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Dir
+ $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
+ $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
}
dir_check("are the configuration files", "CONFIG_DIR");
dir_check("are the modules to be compiled to", "MODULE_DIR");
dir_check("is the IRCd binary to be placed", "BINARY_DIR");
- dir_check("are the IRCd libraries to be placed", "LIBRARY_DIR");
+ dir_check("do you want the build to take place", "BUILD_DIR");
+ my $chose_hiperf = 0;
if ($has_kqueue) {
- yesno(USE_KQUEUE,"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
+ yesno('USE_KQUEUE',"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
print "\n";
+ if ($config{USE_KQUEUE} eq "y") {
+ $chose_hiperf = 1;
+ }
}
if ($has_epoll) {
- yesno(USE_EPOLL,"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
+ yesno('USE_EPOLL',"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
print "\n";
- }
- $chose_hiperf = (($config{USE_EPOLL} eq "y") || ($config{USE_KQUEUE} eq "y"));
- if (!$chose_hiperf) {
- print "No high-performance socket engines are available, or you chose\n";
- print "not to enable one. Defaulting to select() engine.\n\n";
- }
-
- yesno(IPV6,"Would you like to build InspIRCd with IPv6 support?");
- print "\n";
-
- if ($config{IPV6} eq "y") {
- print "You have chosen to build an \033[1;32mIPV6-only\033[0m server.\nTo accept IPV4 users, you must use the '::ffff:' notation of addresses.\n\n";
- $config{SUPPORT_IP6LINKS} = "y";
- } else {
- yesno(SUPPORT_IP6LINKS,"You have chosen to build an \033[1;32mIPV4-only\033[0m server.\nWould you like to enable support for linking to IPV6-enabled\nInspIRCd servers which are using '::ffff:' notation?\nIf you are using a recent operating\nsystem and are unsure, answer yes.");
- print "\n";
- }
-
- if (($config{HAS_GNUTLS} eq "y") && ($config{HAS_OPENSSL} eq "y")) {
- print "I have detected both GnuTLS and OpenSSL on your system.\n";
- print "I will default to GnuTLS. If you wish to use OpenSSL\n";
- print "instead, you should enable the OpenSSL module yourself\n";
- print "by copying it from src/modules/extra to src/modules.\n\n";
- }
-
- if ($config{HAS_GNUTLS} eq "y") {
- yesno(USE_GNUTLS, "Would you like to enable SSL Support?");
- if ($config{USE_GNUTLS} eq "y") {
- print "\nUsing GnuTLS SSL module.\n";
- }
- } elsif ($config{HAS_OPENSSL} eq "y") {
- yesno(USE_OPENSSL, "Would you like to enable SSL Support?");
- if ($config{USE_OPENSSL} eq "y") {
- print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
+ if ($config{USE_EPOLL} eq "y") {
+ $chose_hiperf = 1;
}
}
-
- print "\nThe following questions will ask you for various figures relating\n";
- print "To your IRCd install. Please note that these should usually be left\n";
- print "as defaults unless you have a real reason to change them. If they\n";
- print "changed, then the values must be identical on all servers on your\n";
- print "network, or malfunctions and/or crashes may occur, with the exception\n";
- print "of the 'maximum number of clients' setting which may be different on\n";
- print "different servers on the network.\n\n";
-
- # File Descriptor Settings..
- my $continue = 0;
- while (!$continue) {
- print "Maximum number of clients at any one time ($config{MAX_CLIENT_T})\n";
- print "[\033[1;32m$config{MAX_CLIENT}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAX_CLIENT};
- }
- if ($var =~ /^\d+$/) {
- if (($var > $config{MAX_CLIENT_T}) && ($fd_scan_fail ne "true")) {
- # Client has entered a larger number than the 'discovered' value
- # Confirm.
- print "WARNING: Our scans have indicated that you are attempting
-to use more sockets than there are avaliable. Are you sure
-you wish to do this? It may cause the IRCd to malfunction [y/n]
-[\033[1;32mn\033[0m] -> $c";
- chomp($tmp = <STDIN>);
- if ($tmp ne "y") {
- print "Please enter the correct value.\n\n";
- next;
- }
- }
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
- next;
- }
- # If we get here, we should be good to go.
- $config{MAX_CLIENT} = $var;
- $config{MAX_DESCRIPTORS} = $var;
- $continue = 1;
+ if ($has_ports) {
+ yesno('USE_PORTS',"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
print "\n";
- }
-
- my $continue = 0;
- while (!$continue) {
- print "What is the maximum length of nicknames?\n";
- print "[\033[1;32m$config{NICK_LENGT}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{NICK_LENGT};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{NICK_LENGT} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
+ if ($config{USE_PORTS} eq "y") {
+ $chose_hiperf = 1;
}
}
- $continue = 0;
- while (!$continue) {
- print "What is the maximum length of channel names?\n";
- print "[\033[1;32m$config{CHAN_LENGT}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{CHAN_LENGT};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{CHAN_LENGT} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
+ if (!$chose_hiperf) {
+ yesno('USE_POLL', "Would you like to use poll?\n This is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?");
+ if ($config{USE_POLL} ne "y")
+ {
+ print "No high-performance socket engines are available, or you chose\n";
+ print "not to enable one. Defaulting to select() engine.\n\n";
}
}
- $continue = 0;
- while (!$continue) {
- print "What is the maximum number of channels a normal user may join at any one time?\n";
- print "[\033[1;32m$config{MAX_CHANNE}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAX_CHANNE};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{MAX_CHANNE} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
- }
- }
+ yesno('IPV6',"Would you like to build InspIRCd with IPv6 support?\nYou can still use IPv4 addresses in your port bindings.\n\nEnable IPv6?");
+ print "\n";
- $continue = 0;
- while (!$continue) {
- print "What is the maximum number of channels an oper may join at any one time?\n";
- print "[\033[1;32m$config{MAX_OPERCH}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAX_OPERCH};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{MAX_OPERCH} = $var;
- $continue = 1;
- print "\n";
- }
- }
+ $config{USE_FREEBSD_BASE_SSL} = "n";
+ $config{USE_FREEBSD_PORTS_SSL} = "n";
+ if ($config{HAS_OPENSSL_PORT} ne "")
+ {
+ $config{USE_FREEBSD_PORTS_SSL} = "y";
+ print "I have detected the OpenSSL FreeBSD port installed on your system,\n";
+ print "version \e[1;32m".$config{HAS_OPENSSL_PORT}."\e[0m. Your base system OpenSSL is version \e[1;32m".$openssl_ver."\e[0m.\n\n";
+ yesno('USE_FREEBSD_PORTS_SSL', "Do you want to use the FreeBSD ports version?");
+ print "\n";
+ $config{USE_FREEBSD_BASE_SSL} = "y" if ($config{USE_FREEBSD_PORTS_SSL} eq "n");
- $continue = 0;
- while (!$continue) {
- print "What is the maximum number of mode changes in one line?\n";
- print "[\033[1;32m$config{MAXI_MODES}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAXI_MODES};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{MAXI_MODES} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
+ if ($config{USE_FREEBSD_BASE_SSL} eq "n")
+ {
+ # update to port version
+ $openssl_ver = $config{HAS_OPENSSL_PORT};
}
}
-
- $continue = 0;
- while (!$continue) {
- print "What is the maximum length of an ident (username)?\n";
- print "[\033[1;32m$config{MAX_IDENT}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAX_IDENT};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{MAX_IDENT} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
- }
+ else
+ {
+ $config{USE_FREEBSD_BASE_SSL} = "y" if ($^O eq "freebsd");
}
- $continue = 0;
- while (!$continue) {
- print "What is the maximum length of a quit message?\n";
- print "[\033[1;32m$config{MAX_QUIT}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAX_QUIT};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{MAX_QUIT} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
- }
- }
+ $config{USE_SSL} = "n";
+ $config{MODUPDATE} = 'n';
- $continue = 0;
- while (!$continue) {
- print "What is the maximum length of a channel topic?\n";
- print "[\033[1;32m$config{MAX_TOPIC}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAX_TOPIC};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{MAX_TOPIC} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
- }
- }
+ if ($config{HAS_GNUTLS} eq "y" || $config{HAS_OPENSSL} eq "y")
+ {
+ print "Detected GnuTLS version: \e[1;32m" . $gnutls_ver . "\e[0m\n";
+ print "Detected OpenSSL version: \e[1;32m" . $openssl_ver . "\e[0m\n\n";
- $continue = 0;
- while (!$continue) {
- print "What is the maximum length of a kick message?\n";
- print "[\033[1;32m$config{MAX_KICK}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAX_KICK};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{MAX_KICK} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
- }
- }
+ yesno('USE_SSL', "One or more SSL libraries detected. Would you like to enable SSL support?");
+ if ($config{USE_SSL} eq "y")
+ {
+ if ($config{HAS_GNUTLS} eq "y")
+ {
+ yesno('USE_GNUTLS',"Would you like to enable SSL with m_ssl_gnutls? (recommended)");
+ if ($config{USE_GNUTLS} eq "y")
+ {
+ print "\nUsing GnuTLS SSL module.\n";
+ }
+ }
- $continue = 0;
- while (!$continue) {
- print "What is the maximum length of a GECOS (real name) field?\n";
- print "[\033[1;32m$config{MAX_GECOS}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAX_GECOS};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{MAX_GECOS} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
+ if ($config{HAS_OPENSSL} eq "y")
+ {
+ yesno('USE_OPENSSL', "Would you like to enable SSL with m_ssl_openssl?");
+ if ($config{USE_OPENSSL} eq "y")
+ {
+ print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
+ }
+ }
}
}
+ else
+ {
+ print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed if\n";
+ print "you intend to use OpenSSL, or that GnuTLS is in your path if you intend\nto use GnuTLS.\n\n";
+ }
- $continue = 0;
- while (!$continue) {
- print "What is the maximum length of an away message?\n";
- print "[\033[1;32m$config{MAX_AWAY}\033[0m] -> ";
- chomp($var = <STDIN>);
- if ($var eq "") {
- $var = $config{MAX_AWAY};
- }
- if ($var =~ /^\d+$/) {
- # We don't care what the number is, set it and be on our way.
- $config{MAX_AWAY} = $var;
- $continue = 1;
- print "\n";
- } else {
- print "You must enter a number in this field. Please try again.\n\n";
- }
+ yesno('MODUPDATE',"Would you like to check for updates to third-party modules?");
+ print "\n";
+ if ($config{MODUPDATE} eq "y") {
+ print "Checking for upgrades to extra and third party modules... ";
+ system "./modulemanager upgrade";
}
}
-print "\n\033[1;32mPre-build configuration is complete!\033[0m\n\n";
-print "\033[0mBase install path:\033[1;32m\t\t$config{BASE_DIR}\033[0m\n";
-print "\033[0mConfig path:\033[1;32m\t\t\t$config{CONFIG_DIR}\033[0m\n";
-print "\033[0mModule path:\033[1;32m\t\t\t$config{MODULE_DIR}\033[0m\n";
-print "\033[0mLibrary path:\033[1;32m\t\t\t$config{LIBRARY_DIR}\033[0m\n";
-print "\033[0mMax connections:\033[1;32m\t\t$config{MAX_CLIENT}\033[0m\n";
-print "\033[0mMax User Channels:\033[1;32m\t\t$config{MAX_CHANNE}\033[0m\n";
-print "\033[0mMax Oper Channels:\033[1;32m\t\t$config{MAX_OPERCH}\033[0m\n";
-print "\033[0mMax nickname length:\033[1;32m\t\t$config{NICK_LENGT}\033[0m\n";
-print "\033[0mMax channel length:\033[1;32m\t\t$config{CHAN_LENGT}\033[0m\n";
-print "\033[0mMax mode length:\033[1;32m\t\t$config{MAXI_MODES}\033[0m\n";
-print "\033[0mMax ident length:\033[1;32m\t\t$config{MAX_IDENT}\033[0m\n";
-print "\033[0mMax quit length:\033[1;32m\t\t$config{MAX_QUIT}\033[0m\n";
-print "\033[0mMax topic length:\033[1;32m\t\t$config{MAX_TOPIC}\033[0m\n";
-print "\033[0mMax kick length:\033[1;32m\t\t$config{MAX_KICK}\033[0m\n";
-print "\033[0mMax name length:\033[1;32m\t\t$config{MAX_GECOS}\033[0m\n";
-print "\033[0mMax away length:\033[1;32m\t\t$config{MAX_AWAY}\033[0m\n";
-print "\033[0mGCC Version Found:\033[1;32m\t\t$config{GCCVER}.x\033[0m\n";
-# and not echo it out so we don't get some ricer fuck complaining
-#print "\033[0mOptimization Flag:\033[1;32m\t\t$config{OPTIMISATI}\033[0m\n";
-print "\033[0mCompiler program:\033[1;32m\t\t$config{CC}\033[0m\n";
-print "\033[0mStatic modules:\033[1;32m\t\t\t$config{STATIC_LINK}\033[0m\n";
-print "\033[0mIPv6 Support:\033[1;32m\t\t\t$config{IPV6}\033[0m\n";
-print "\033[0mIPv6 to IPv4 Links:\033[1;32m\t\t$config{SUPPORT_IP6LINKS}\033[0m\n";
-print "\033[0mGnuTLS Support:\033[1;32m\t\t\t$config{USE_GNUTLS}\033[0m\n";
-print "\033[0mOpenSSL Support:\033[1;32m\t\t$config{USE_OPENSSL}\033[0m\n\n";
+dumphash();
if (($config{USE_GNUTLS} eq "y") && ($config{HAS_GNUTLS} ne "y"))
{
print "Sorry, but i couldn't detect openssl. Make sure openssl is in your path.\n";
exit(0);
}
+our $failed = 0;
+
+$config{CERTGEN} ||= 'y';
+yesno('CERTGEN',"Would you like generate SSL certificates now?") if ($interactive && ($config{USE_GNUTLS} eq "y" || $config{USE_OPENSSL} eq "y"));
if ($config{USE_GNUTLS} eq "y") {
- $failed = 0;
- open(TMP, "<src/modules/m_ssl_gnutls.cpp") or $failed = 1;
- close(TMP);
- if ($failed) {
+ unless (-r "src/modules/m_ssl_gnutls.cpp") {
print "Symlinking src/modules/m_ssl_gnutls.cpp from extra/\n";
- chdir("src/modules");
- system("ln -s extra/m_ssl_gnutls.cpp");
- system("ln -s extra/ssl_cert.h");
- chdir("../..");
+ symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!";
}
- getmodules();
- if ($interactive)
+ if ($interactive && $config{CERTGEN} eq 'y')
{
- $failed = 0;
- open(TMP, "<$config{CONFIG_DIR}/key.pem") or $failed = 1;
- close(TMP);
- open(TMP, "<$config{CONFIG_DIR}/cert.pem") or $failed = 1;
- close(TMP);
- if ($failed) {
+ unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
print "SSL Certificates Not found, Generating.. \n\n
*************************************************************
* Generating the Private Key may take some time, go grab a *
* few times and get that HD going :) Then answer the *
* Questions which follow. If you are unsure, just hit enter *
*************************************************************\n\n";
- system("certtool --generate-privkey --outfile key.pem");
- system("certtool --generate-self-signed --load-privkey key.pem --outfile cert.pem");
- print "\nCertificate generation complete, copying to config directory... ";
- system("mv key.pem $config{CONFIG_DIR}/key.pem");
- system("mv cert.pem $config{CONFIG_DIR}/cert.pem");
- print "Done.\n\n";
- } else {
- print "SSL Certificates found, skipping.\n\n"
+ $failed = make_gnutls_cert();
+ if ($failed) {
+ print "\n\e[1;32mCertificate generation failed!\e[0m\n\n";
+ } else {
+ print "\nCertificate generation complete, copying to config directory... ";
+ File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
+ File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
+ print "Done.\n\n";
+ }
+ }
+ else {
+ print "SSL Certificates found, skipping.\n\n";
}
}
else
{
print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
}
-} elsif ($config{USE_OPENSSL} eq "y") {
- $failed = 0;
- open(TMP, "<src/modules/m_ssl_openssl.cpp") or $failed = 1;
- close(TMP);
- if ($failed) {
+}
+
+if ($config{USE_OPENSSL} eq "y") {
+ unless (-r "src/modules/m_ssl_openssl.cpp") {
print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
- chdir("src/modules");
- system("ln -s extra/m_ssl_openssl.cpp");
- system("ln -s extra/ssl_cert.h");
- chdir("../..");
+ symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!";
}
- getmodules();
$failed = 0;
- if ($interactive)
+ if ($interactive && $config{CERTGEN} eq 'y')
{
- open(TMP, "<$config{CONFIG_DIR}/key.pem") or $failed = 1;
- close(TMP);
- open(TMP, "<$config{CONFIG_DIR}/cert.pem") or $failed = 1;
- close(TMP);
- if ($failed) {
+ unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
print "SSL Certificates Not found, Generating.. \n\n
*************************************************************
* Generating the certificates may take some time, go grab a *
-* coffee, or something. *
+* coffee, or something. *
*************************************************************\n\n";
- system("openssl req -x509 -nodes -newkey rsa:1024 -keyout key.pem -out cert.pem");
- system("openssl dhparam -out dhparams.pem 1024");
+ make_openssl_cert();
print "\nCertificate generation complete, copying to config directory... ";
- system("mv key.pem $config{CONFIG_DIR}/key.pem");
- system("mv cert.pem $config{CONFIG_DIR}/cert.pem");
- system("mv dhparams.pem $config{CONFIG_DIR}/dhparams.pem");
+ File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
+ File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
+ File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
print "Done.\n\n";
} else {
print "SSL Certificates found, skipping.\n\n"
print "Skipping SSL Certificate generation, SSL support is not available.\n\n";
}
-getosflags();
-makecache();
+depcheck();
writefiles(1);
+makecache();
print "\n\n";
-print "To build your server with these settings, please type '\033[1;32m$config{MAKEPROG}\033[0m' now.\n";
+print "To build your server with these settings, please run '\e[1;32mmake\e[0m' now.\n";
if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
- print "Please remember that to enable \033[1;32mSSL support\033[0m you must\n";
- print "load the required modules in your config. This configure process\n";
- print "has just prepared these modules to be compiled for you, and has not\n";
- print "configured them to be compiled into the core of the ircd.\n";
+ print "Please note: for \e[1;32mSSL support\e[0m you will need to load required\n";
+ print "modules in your config. This configure script has added those modules to the\n";
+ print "build process. For more info please refer to:\n";
+ print "\e[1;32mhttp://wiki.inspircd.org/Installation_From_Tarball\e[0m\n";
}
-print "*** \033[1;32mRemember to edit your configuration files!!!\033[0m ***\n\n\n";
+print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n\n";
if (($config{OSNAME} eq "OpenBSD") && ($config{CC} ne "eg++")) {
- print "\033[1;32mWARNING!\033[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but i'm letting you\ngo ahead with it anyway, just in case i'm wrong :-)\n";
+ print "\e[1;32mWARNING!\e[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but i'm letting you\ngo ahead with it anyway, just in case i'm wrong :-)\n";
}
if ($config{GCCVER} < "3") {
print <<FOO2;
-\033[1;32mWARNING!\033[0m You are attempting to compile InspIRCd on GCC 2.x!
+\e[1;32mWARNING!\e[0m You are attempting to compile InspIRCd on GCC 2.x!
GCC 2.x series compilers only had partial (read as broken) C++ support, and
your compile will most likely fail horribly! If you have any problems, do NOT
report them to the bugtracker or forums without first upgrading your compiler
}
################################################################################
-# HELPER FUNCTIONS #
+# HELPER FUNCTIONS #
################################################################################
sub getcache {
# Retrieves the .config.cache file, and loads values into the main config hash.
- open(CACHE, ".config.cache") or return undef;
+ open(CACHE, ".config.cache") or return 0;
while (<CACHE>) {
chomp;
# Ignore Blank lines, and comments..
next if /^\s*$/;
next if /^\s*#/;
- my ($key, $value) = split("=", $_);
+ my ($key, $value) = split("=", $_, 2);
$value =~ /^\"(.*)\"$/;
# Do something with data here!
$config{$key} = $1;
}
- close(CONFIG);
- return "true";
+ close(CACHE);
+ return 1;
}
sub makecache {
# Dump the contents of %config
- print "Writing \033[1;32mcache file\033[0m for future ./configures ...\n";
+ print "Writing \e[1;32mcache file\e[0m for future ./configures ...\n";
open(FILEHANDLE, ">.config.cache");
- foreach $key (keys %config) {
+ foreach my $key (keys %config) {
print FILEHANDLE "$key=\"$config{$key}\"\n";
}
close(FILEHANDLE);
my $complete = 0;
while (!$complete) {
print "In what directory $desc?\n";
- print "[\033[1;32m$config{$hash_key}\033[0m] -> ";
- chomp($var = <STDIN>);
+ print "[\e[1;32m$config{$hash_key}\e[0m] -> ";
+ chomp(my $var = <STDIN>);
if ($var eq "") {
$var = $config{$hash_key};
}
# Assume relative Path was given.. fill in the rest.
$var = $this . "/$var";
}
-
- $var = resolve_directory($var);
+
+ $var = resolve_directory($var);
if (! -e $var) {
- print "$var does not exist. Create it?\n[\033[1;32my\033[0m] ";
- chomp($tmp = <STDIN>);
+ print "$var does not exist. Create it?\n[\e[1;32my\e[0m] ";
+ chomp(my $tmp = <STDIN>);
if (($tmp eq "") || ($tmp =~ /^y/i)) {
# Attempt to Create the Dir..
-
- system("mkdir -p \"$var\" >> /dev/null 2>&1");
- $chk = system("mkdir -p \"$var\" >> /dev/null 2>&1") / 256;
- if ($chk != 0) {
+ my $chk = eval {
+ use File::Path ();
+ File::Path::mkpath($var, 0, 0777);
+ 1;
+ };
+ unless (defined($chk) && -d $var) {
print "Unable to create directory. ($var)\n\n";
# Restart Loop..
next;
}
}
-sub getosflags {
-
- $config{LDLIBS} = "-lstdc++";
- $config{FLAGS} = "-fno-strict-aliasing -fPIC -Wall -Woverloaded-virtual $config{OPTIMISATI}";
- $config{MAKEPROG} = "make";
-
- if ($config{OSNAME} =~ /OpenBSD/i) {
- $config{MAKEPROG} = "gmake";
- chomp($foo = `eg++ -dumpversion | cut -c 1`);
- # theyre running the package version of gcc (eg++)... detect it and set up its version numbers.
- # if theyre not running this, configure lets the build continue but they probably wont manage to
- # compile as this standard version is 2.95.3!
- if ($foo ne "") {
- $config{CC} = "eg++";
- chomp($config{GCCVER} = `eg++ -dumpversion | cut -c 1`); # we must redo these if we change the compiler path
- }
- return "OpenBSD";
- }
-
- if ($config{OSNAME} =~ /Linux/i) {
- $config{LDLIBS} = "-ldl -lstdc++";
- $config{FLAGS} = "-fno-strict-aliasing -fPIC -Wall -Woverloaded-virtual $config{OPTIMISATI}";
- $config{FLAGS} .= " " . $ENV{CXXFLAGS} if exists($ENV{CXXFLAGS});
- $config{MAKEPROG} = "make";
- if ($config{OSNAME} =~ /CYGWIN/) {
- $config{FLAGS} = "-fno-strict-aliasing -Wall -Woverloaded-virtual $config{OPTIMISATI}";
- $config{LDLIBS} = "";
- $config{MAKEPROG} = "/usr/bin/make";
- $config{MAKEORDER} = "ircd mods";
- return "Cygwin";
- } elsif ($config{OSNAME} eq "CYG-STATIC") {
- $config{FLAGS} = "-fno-strict-aliasing -Wall -Woverloaded-virtual $config{OPTIMISATI}";
- $config{LDLIBS} = "";
- $config{MAKEPROG} = "/usr/bin/make";
- $config{MAKEORDER} = "mods ircd";
- $config{STATICLIBS} = "modules/mods.a";
- $config{STATIC_LINK} = "yes";
- return "Cygwin-Static";
- }
- $config{FLAGS} .= " " . $ENV{CXXFLAGS} if exists($ENV{CXXFLAGS});
- }
-
- if ($config{OSNAME} =~ /SunOS/i)
- {
- # solaris/sunos needs these
- # socket = bsd sockets api
- # nsl = dns stuff
- # rt = POSIX realtime extensions
- # resolv = inet_aton only (why isnt this in nsl?!)
- $config{MAKEPROG} = "gmake";
- $config{LDLIBS} = $config{LDLIBS} . " -lsocket -lnsl -lrt -lresolv";
- return "Solaris";
- }
-
- if($config{OSNAME} =~ /MINGW32/i)
- {
- # All code is position-independent on windows
- $config{FLAGS} =~ s/-fPIC //;
- return "MinGW";
- }
-
- return $config{OSNAME};
-}
-
-sub is_dir {
- my ($path) = @_;
- if (chdir($path)) {
- chdir($this);
- return 1;
- } else {
- # Just in case..
- chdir($this);
- return 0;
- }
-}
+our $SHARED = "";
-sub getmodules {
- my $i = 0;
- print "Detecting modules ";
- opendir(DIRHANDLE, "src/modules");
- foreach $name (sort readdir(DIRHANDLE)) {
- if ($name =~ /^m_(.+)\.cpp$/)
- {
- $mod = $1;
- if ($mod !~ /_static$/) {
- $modlist[$i++] = $mod;
- print ".";
- }
- }
- }
- closedir(DIRHANDLE);
- print "\nOk, $i modules.\n";
-}
-
-sub getrevision {
- if ($no_svn) {
- return "0";
- }
- my $data = `svn info`;
-
- if ($data eq "") {
- $no_svn = 1;
- $rev = "0";
- return $rev;
- }
- $data =~ /Revision: (\d+)/;
- my $rev = $1;
- if (!defined($rev)) {
- $rev = "0";
- }
- return $rev;
-}
+my ($mliflags, $mfrules, $mobjs, $mfcount) = ("", "", "", 0);
sub writefiles {
my($writeheader) = @_;
# First File.. inspircd_config.h
chomp(my $incos = `uname -n -s -r`);
- chomp(my $version = `sh ./src/version.sh`);
- chomp(my $revision = getrevision());
- $version = "$version(r$revision)";
+ chomp(my $version = `sh src/version.sh`);
chomp(my $revision2 = getrevision());
if ($writeheader == 1)
{
- print "Writing \033[1;32minspircd_config.h\033[0m\n";
- open(FILEHANDLE, ">include/inspircd_config.h");
- my $NL = $config{NICK_LENGT}+1;
- my $CL = $config{CHAN_LENGT}+1;
+ print "Writing \e[1;32minspircd_config.h\e[0m\n";
+ open(FILEHANDLE, ">include/inspircd_config.h.tmp");
print FILEHANDLE <<EOF;
/* Auto generated by configure, do not modify! */
#ifndef __CONFIGURATION_AUTO__
#define __CONFIGURATION_AUTO__
-#define CONFIG_FILE "$config{CONFIG_DIR}/inspircd.conf"
+/* this is for windows support. */
+#define CoreExport /**/
+#define DllExport /**/
+
#define MOD_PATH "$config{MODULE_DIR}"
-#define VERSION "$version"
-#define REVISION "$revision2"
-#define MAXCLIENTS $config{MAX_CLIENT}
-#define MAXCLIENTS_S "$config{MAX_CLIENT}"
#define SOMAXCONN_S "$config{_SOMAXCONN}"
-#define MAX_DESCRIPTORS $config{MAX_DESCRIPTORS}
-#define NICKMAX $NL
-#define CHANMAX $CL
-#define MAXCHANS $config{MAX_CHANNE}
-#define OPERMAXCHANS $config{MAX_OPERCH}
-#define MAXMODES $config{MAXI_MODES}
-#define IDENTMAX $config{MAX_IDENT}
-#define MAXQUIT $config{MAX_QUIT}
-#define MAXTOPIC $config{MAX_TOPIC}
-#define MAXKICK $config{MAX_KICK}
-#define MAXGECOS $config{MAX_GECOS}
-#define MAXAWAY $config{MAX_AWAY}
-#define OPTIMISATION $config{OPTIMITEMP}
-#define LIBRARYDIR "$config{LIBRARY_DIR}"
-#define SYSTEM "$incos"
-#define MAXBUF 514
+#define ENTRYPOINT int main(int argc, char** argv)
+
EOF
+print FILEHANDLE "#define MAXBUF " . ($config{MAXBUF}+2) . "\n";
+
if ($config{OSNAME} =~ /SunOS/i) {
print FILEHANDLE "#define IS_SOLARIS\n";
}
- if ($config{OSNAME} =~ /CYGWIN/i) {
- print FILEHANDLE "#define IS_CYGWIN\n";
- print FILEHANDLE "#ifndef FD_SETSIZE\n#define FD_SETSIZE 1024\n#endif\n";
- }
if ($config{OSNAME} =~ /MINGW32/i) {
print FILEHANDLE "#define IS_MINGW\n";
}
- if ($config{OSNAME} =~ /CYG-STATIC/i) {
- print FILEHANDLE "#ifndef FD_SETSIZE\n#define FD_SETSIZE 1024\n#endif\n";
- }
- if ($config{STATIC_LINK} eq "yes") {
- print FILEHANDLE "#define STATIC_LINK\n";
- }
if ($config{GCCVER} >= 3) {
print FILEHANDLE "#define GCC3\n";
}
+ if (
+ (($config{GCCVER} == 4) && ($config{GCCMINOR} >= 3))
+ ||
+ ($config{GCCVER} > 4)
+ ) {
+ print FILEHANDLE "#define HASHMAP_DEPRECATED\n";
+ }
if ($config{HAS_STRLCPY} eq "true") {
print FILEHANDLE "#define HAS_STRLCPY\n";
}
if ($config{IPV6} =~ /y/i) {
print FILEHANDLE "#define IPV6\n";
}
- if ($config{SUPPORT_IP6LINKS} =~ /y/i) {
- print FILEHANDLE "#define SUPPORT_IP6LINKS\n";
+ if ($config{HAS_EVENTFD} eq 'true') {
+ print FILEHANDLE "#define HAS_EVENTFD\n";
}
my $use_hiperf = 0;
if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
print FILEHANDLE "#define USE_KQUEUE\n";
- $se = "socketengine_kqueue";
+ $config{SOCKETENGINE} = "socketengine_kqueue";
$use_hiperf = 1;
}
if (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
print FILEHANDLE "#define USE_EPOLL\n";
- $se = "socketengine_epoll";
+ $config{SOCKETENGINE} = "socketengine_epoll";
+ $use_hiperf = 1;
+ }
+ if (($has_ports) && ($config{USE_PORTS} eq "y")) {
+ print FILEHANDLE "#define USE_PORTS\n";
+ $config{SOCKETENGINE} = "socketengine_ports";
$use_hiperf = 1;
}
# user didn't choose either epoll or select for their OS.
# default them to USE_SELECT (ewwy puke puke)
if (!$use_hiperf) {
- print FILEHANDLE "#define USE_SELECT\n";
- $se = "socketengine_select";
+ print "no hi-perf, " . $config{USE_POLL};
+ if ($config{USE_POLL} eq "y")
+ {
+ print FILEHANDLE "#define USE_POLL\n";
+ $config{SOCKETENGINE} = "socketengine_poll";
+ }
+ else
+ {
+ print FILEHANDLE "#define USE_SELECT\n";
+ $config{SOCKETENGINE} = "socketengine_select";
+ }
}
- print FILEHANDLE "\n#endif\n";
+ print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n\n#endif\n";
close(FILEHANDLE);
- }
- if ($writeheader)
- {
- open(FILEHANDLE, ">include/inspircd_se_config.h");
+ open(FILEHANDLE, ">include/inspircd_version.h.tmp");
print FILEHANDLE <<EOF;
-/* Auto generated by configure, do not modify or commit to svn! */
-#ifndef __CONFIGURATION_SOCKETENGINE__
-#define __CONFIGURATION_SOCKETENGINE__
-
-#include "$se.h"
-
-#endif
+#define VERSION "$version"
+#define REVISION "$revision2"
+#define SYSTEM "$incos"
EOF
- close(FILEHANDLE);
- }
-
-
- # Create a Modules List..
- my $modules = "";
- foreach $i (@modlist)
- {
- if ($config{STATIC_LINK} eq "yes") {
- $modules .= "m_".$i.".o ";
- }
- else {
- $modules .= "m_".$i.".so ";
+ close FILEHANDLE;
+
+ for my $file (qw(include/inspircd_config.h include/inspircd_version.h)) {
+ my $diff = 0;
+ open my $fh1, $file or $diff = 1;
+ open my $fh2, $file.'.tmp' or die "Can't read $file.tmp that we just wrote: $!";
+ while (!$diff) {
+ my $line1 = <$fh1>;
+ my $line2 = <$fh2>;
+ if (defined($line1) != defined($line2)) {
+ $diff = 1;
+ } elsif (!defined $line1) {
+ last;
+ } else {
+ $diff = ($line1 ne $line2);
+ }
+ }
+ if ($diff) {
+ unlink $file;
+ rename "$file.tmp", $file;
+ } else {
+ unlink "$file.tmp";
+ }
}
}
- chomp($modules); # Remove Redundant whitespace..
-
# Write all .in files.
my $tmp = "";
my $file = "";
my $exe = "inspircd";
- if ($config{OSNAME} =~ /CYGWIN/i) {
- $exe = "inspircd.exe";
- }
-
- opendir(DIRHANDLE, $this);
-
# Do this once here, and cache it in the .*.inc files,
# rather than attempting to read src/version.sh from
# compiled code -- we might not have the source to hand.
# Fix for bug#177 by Brain.
- chomp(my $version = `sh ./src/version.sh`);
+ chomp($version = `sh ./src/version.sh`);
chomp(my $revision = getrevision());
$version = "$version(r$revision)";
# We can actually parse any file starting with . and ending with .inc,
# but right now we only parse .inspircd.inc to form './inspircd'
+ prepare_dynamic_makefile();
- foreach $name (sort readdir(DIRHANDLE)) {
- if ($name =~ /^\.(.+)\.inc$/) {
- $file = $1;
- # All .name.inc files need parsing!
- $tmp = "";
- open(FILEHANDLE, ".$file.inc");
- while (<FILEHANDLE>) {
- $tmp .= $_;
- }
- close(FILEHANDLE);
+ my @dotfiles = qw(main.mk inspircd);
+ push @dotfiles, 'org.inspircd.plist' if $config{OSNAME} eq 'darwin';
- $tmp =~ s/\@CC\@/$config{CC}/;
- $tmp =~ s/\@MAKEPROG\@/$config{MAKEPROG}/;
- $tmp =~ s/\@FLAGS\@/$config{FLAGS}/;
- $tmp =~ s/\@LDLIBS\@/$config{LDLIBS}/;
- $tmp =~ s/\@BASE_DIR\@/$config{BASE_DIR}/;
- $tmp =~ s/\@CONFIG_DIR\@/$config{CONFIG_DIR}/;
- $tmp =~ s/\@MODULE_DIR\@/$config{MODULE_DIR}/;
- $tmp =~ s/\@BINARY_DIR\@/$config{BINARY_DIR}/;
- $tmp =~ s/\@LIBRARY_DIR\@/$config{LIBRARY_DIR}/;
- $tmp =~ s/\@MODULES\@/$modules/;
- $tmp =~ s/\@EXECUTABLE\@/$exe/;
- $tmp =~ s/\@MAKEORDER\@/$config{MAKEORDER}/;
- $tmp =~ s/\@STATICLIBS\@/$config{STATICLIBS}/;
- $tmp =~ s/\@VERSION\@/$version/;
-
- print "Writing \033[1;32m$file\033[0m\n";
- open(FILEHANDLE, ">$file");
- print FILEHANDLE $tmp;
- }
- }
- closedir(DIRHANDLE);
-
- # Make inspircd executable!
- chmod 0744, 'inspircd';
-
- if ($config{STATIC_LINK} eq "yes") {
- print "Writing static-build \033[1;32msrc/Makefile\033[0m\n";
- write_static_makefile();
- write_static_modules_makefile();
- } elsif ($config{OSNAME} =~ /CYGWIN/i) {
- print "Writing cygwin-build \033[1;32msrc/Makefile\033[0m\n";
- write_static_makefile();
- write_dynamic_modules_makefile();
- } else {
- print "Writing dynamic-build \033[1;32msrc/Makefile\033[0m\n";
- write_dynamic_makefile();
- write_dynamic_modules_makefile();
- }
-}
+ foreach my $file (@dotfiles) {
+ open(FILEHANDLE, "make/template/$file") or die "Can't open make/template/$file: $!";
+ $_ = join '', <FILEHANDLE>;
+ close(FILEHANDLE);
-sub getcompilerflags {
- my ($file) = @_;
- open(FLAGS, $file);
- while (<FLAGS>) {
- if ($_ =~ /^\/\* \$CompileFlags: (.+) \*\/$/) {
- close(FLAGS);
- return $1;
- }
- }
- close(FLAGS);
- return undef;
-}
+ $config{BUILD_DIR} ||= resolve_directory($config{ME}."/build");
-sub getlinkerflags {
- my ($file) = @_;
- open(FLAGS, $file);
- while (<FLAGS>) {
- if ($_ =~ /^\/\* \$LinkerFlags: (.+) \*\/$/) {
- close(FLAGS);
- return $1;
+ for my $var (qw(
+ CC SYSTEM BASE_DIR CONFIG_DIR MODULE_DIR BINARY_DIR BUILD_DIR UID
+ STARTSCRIPT DESTINATION EXTRA_DIR SOCKETENGINE
+ )) {
+ s/\@$var\@/$config{$var}/g;
}
- }
- close(FLAGS);
- return undef;
-}
-
-sub getdependencies {
- my ($file) = @_;
- open(FLAGS, $file);
- while (<FLAGS>) {
- if ($_ =~ /^\/\* \$ModDep: (.+) \*\/$/) {
- close(FLAGS);
- return $1;
+ s/\@EXECUTABLE\@/$exe/ if defined $exe;
+ s/\@VERSION\@/$version/ if defined $version;
+
+ if ($file eq 'main.mk') {
+ print "Writing \e[1;32mGNUmakefile\e[0m ...\n";
+
+ my $mk_tmp = $_;
+ s/\@IFDEF (\S+)/ifdef $1/g;
+ s/\@IFNDEF (\S+)/ifndef $1/g;
+ s/\@IFEQ (\S+) (\S+)/ifeq ($1,$2)/g;
+ s/\@ELSIFEQ (\S+) (\S+)/else ifeq ($1,$2)/g;
+ s/\@ELSE/else/g;
+ s/\@ENDIF/endif/g;
+ s/ *\@BSD_ONLY .*\n//g;
+ s/\@GNU_ONLY //g;
+ s/\@DO_EXPORT (.*)/export $1/g;
+ open MKF, '>GNUmakefile' or die "Can't write to GNUmakefile: $!";
+ print MKF $_;
+ close MKF;
+
+ print "Writing \e[1;32mBSDmakefile\e[0m ...\n";
+ $_ = $mk_tmp;
+ s/\@IFDEF (\S+)/.if defined($1)/g;
+ s/\@IFNDEF (\S+)/.if !defined($1)/g;
+ s/\@IFEQ (\S+) (\S+)/.if $1 == $2/g;
+ s/\@ELSIFEQ (\S+) (\S+)/.elif $1 == $2/g;
+ s/\@ELSE/.else/g;
+ s/\@ENDIF/.endif/g;
+ s/\@BSD_ONLY //g;
+ s/ *\@GNU_ONLY .*\n//g;
+ $mk_tmp = $_;
+ $mk_tmp =~ s#\@DO_EXPORT (.*)#"MAKEENV += ".join ' ', map "$_='\${$_}'", split /\s/, $1#eg;
+ open MKF, '>BSDmakefile' or die "Can't write to BSDmakefile: $!";
+ print MKF $mk_tmp;
+ close MKF;
+ } else {
+ print "Writing \e[1;32m$file\e[0m ...\n";
+ open(FILEHANDLE, ">$file") or die("Can't write to $file: $!\n");
+ print FILEHANDLE $_;
+ close(FILEHANDLE);
}
}
- close(FLAGS);
- return undef;
-}
-sub resolve_directory {
- use File::Spec;
- return File::Spec->rel2abs($_[0]);
+ chmod 0755, 'inspircd';
}
-sub yesno {
- my ($flag,$prompt) = @_;
- print "$prompt [\033[1;32m$config{$flag}\033[0m] -> ";
- chomp($tmp = <STDIN>);
- if ($tmp eq "") { $tmp = $config{$flag} }
-
- if (($tmp eq "") || ($tmp =~ /^y/i)) {
- $config{$flag} = "y";
- } else {
- $config{$flag} = "n";
- }
- return;
+sub depcheck
+{
+ getmodules();
+ for my $mod (@modlist) {
+ getcompilerflags("src/modules/m_$mod.cpp");
+ getlinkerflags("src/modules/m_$mod.cpp");
+ }
}
-sub write_static_modules_makefile {
- # Modules Makefile..
- print "Writing \033[1;32msrc/modules/Makefile\033[0m\n";
- open(FILEHANDLE, ">src/modules/Makefile");
-
- ###
- # Module Makefile Header
- ###
- print FILEHANDLE <<EOF;
-# (C) ChatSpike development team
-# Makefile by <Craig\@ChatSpike.net>
-# Many Thanks to Andrew Church <achurch\@achurch.org>
-# for assisting with making this work right.
-#
-# Automatically Generated by ./configure to add a modules
-# please run ./configure --update
-
-all: \$(MODULES)
-
-EOF
- ###
- # End Module Makefile Header
- ###
-
- # Create a Modules List..
- my $modules = "";
- my $cmflags = "";
- my $liflags = "";
-
- open(MODLIST,">include/modlist.h");
-
- ###
- # Include File Header
- ###
- print MODLIST <<HEADER;
-// Generated automatically by configure. DO NOT EDIT!
-
-#ifndef __SYMBOLS__H_CONFIGURED__
-#define __SYMBOLS__H_CONFIGURED__
-
-HEADER
- ###
- # End Include File Header
- ###
-
- # Place Module List into Include
- foreach $i (@modlist) {
- if ($i !~ /_static$/) {
- print MODLIST "extern \"C\" void * $i\_init (void);\n";
- }
- }
- print MODLIST "\nstruct {const char *name; initfunc *value; } modsyms[] = {\n";
+sub prepare_dynamic_makefile
+{
+ my $i = 0;
- ###
- # Build Module Crap
- ###
- foreach $i (@modlist)
+ if (!$has_epoll)
{
- if ($i !~ /_static$/) {
- $cmflags = getcompilerflags("src/modules/m_".$i.".cpp");
- $liflags = getlinkerflags("src/modules/m_".$i.".cpp");
- $deps = getdependencies("src/modules/m_".$i.".cpp");
-
- ###
- # Write Entry to the Makefile
- ###
- print FILEHANDLE <<EOCHEESE;
-m_$i.o: .m_$i\_static.cpp ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h $deps
- \$(CC) -pipe -I../../include \$(FLAGS) $flags -export-dynamic -c .m_$i\_static.cpp
- mv .m_$i\_static.o ../m_$i.o
-
-EOCHEESE
- ###
- # End Write Entry to the MakeFile
- ###
- print "Configuring module [\033[1;32mm_$i.so\033[0m] for static linking... ";
- open(MODULE,"<src/modules/m_".$i.".cpp") or die("Could not open m_".$i.".cpp");
- open(MUNGED,">src/modules/.m_".$i."_static.cpp") or die("Could not create .m_".$i."_static.cpp");
- while (chomp($a = <MODULE>)) {
- $a =~ s/init_module/$i\_init/g;
- print MUNGED "$a\n";
- }
- close(MODULE);
- close(MUNGED);
- print MODLIST <<EOENT;
-{"m_$i.so",\&$i\_init},
-EOENT
- print "done\n";
- }
+ $config{USE_EPOLL} = 0;
}
- print MODLIST "{0}};\n\n#endif\n";
- close(MODLIST);
-}
-
-sub write_dynamic_modules_makefile {
- # Modules Makefile..
- print "Writing \033[1;32msrc/modules/Makefile\033[0m\n";
- open(FILEHANDLE, ">src/modules/Makefile");
- my $extra = "";
-
- if ($config{OSNAME} =~ /CYGWIN/i) {
- $extra = "../inspircd.dll.a";
+ if (!$has_kqueue)
+ {
+ $config{USE_KQUEUE} = 0;
}
-
-###
-# Module Makefile Header
-###
- print FILEHANDLE <<EOF;
-# (C) ChatSpike development team
-# Makefile by <Craig\@ChatSpike.net>
-# Many Thanks to Andrew Church <achurch\@achurch.org>
-# for assisting with making this work right.
-#
-# Automatically Generated by ./configure to add a modules
-# please run ./configure -update or ./configure -modupdate
-
-all: \$(MODULES)
-
-EOF
- ###
- # End Module Makefile Header
- ###
-
- # Create a Modules List..
- my $modules = "";
- my $cmflags = "";
- my $liflags = "";
- my $crud = "";
-
- foreach $i (@modlist) {
- ###
- # Write Entry to the MakeFile
- ###
- $cmflags = getcompilerflags("src/modules/m_".$i.".cpp");
- $liflags = getlinkerflags("src/modules/m_".$i.".cpp");
- $deps = getdependencies("src/modules/m_".$i.".cpp");
- print FILEHANDLE <<EOCHEESE;
-m_$i.so: m_$i.cpp ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/base.h ../../include/inspircd_config.h ../../include/inspircd.h ../../include/configreader.h $deps
- \$(CC) -pipe -I../../include \$(FLAGS) $cmflags -export-dynamic -c m_$i.cpp
- \$(CC) -pipe \$(FLAGS) -shared $liflags -o m_$i.so m_$i.o $extra
-
-EOCHEESE
- $crud = $crud . " install -m 0700 m_$i.so \$(MODPATH)\n";
-###
- # End Write Entry to the MakeFile
- ###
+ if (!$has_ports)
+ {
+ $config{USE_PORTS} = 0;
}
- print FILEHANDLE "modinst:\n \@echo \"Installing modules...\"\n" . $crud;
}
-
-sub write_static_makefile {
- open(FH,">src/Makefile") or die("Could not write src/Makefile!");
- my $i = 0;
- my @cmdlist = ();
- opendir(DIRHANDLE, "src");
- foreach $name (sort readdir(DIRHANDLE)) {
- if ($name =~ /^cmd_(.+)\.cpp$/) {
- $cmdlist[$i++] = $1;
- }
- }
- closedir(DIRHANDLE);
- my $cmdobjs = "";
- my $srcobjs = "";
- foreach my $cmd (@cmdlist) {
- $cmdobjs = $cmdobjs . "cmd_$cmd.o ";
- $srcobjs = $srcobjs . "cmd_$cmd.cpp ";
+# Routine to list out the extra/ modules that have been enabled.
+# Note: when getting any filenames out and comparing, it's important to lc it if the
+# file system is not case-sensitive (== Epoc, MacOS, OS/2 (incl DOS/DJGPP), VMS, Win32
+# (incl NetWare, Symbian)). Cygwin may or may not be case-sensitive, depending on
+# configuration, however, File::Spec does not currently tell us (it assumes Unix behavior).
+sub list_extras () {
+ use File::Spec;
+ # @_ not used
+ my $srcdir = File::Spec->catdir("src", "modules");
+ my $abs_srcdir = File::Spec->rel2abs($srcdir);
+ local $_;
+ my $dd;
+ opendir $dd, File::Spec->catdir($abs_srcdir, "extra") or die (File::Spec->catdir($abs_srcdir, "extra") . ": $!\n");
+ my @extras = map { File::Spec->case_tolerant() ? lc($_) : $_ } (readdir($dd));
+ closedir $dd;
+ undef $dd;
+ opendir $dd, $abs_srcdir or die "$abs_srcdir: $!\n";
+ my @sources = map { File::Spec->case_tolerant() ? lc($_) : $_ } (readdir($dd));
+ closedir $dd;
+ undef $dd;
+ my $maxlen = (sort { $b <=> $a } (map {length($_)} (@extras)))[0];
+ my %extras = ();
+EXTRA: for my $extra (@extras) {
+ next if (File::Spec->curdir() eq $extra || File::Spec->updir() eq $extra);
+ next if ($extra eq '.svn');
+ my $abs_extra = File::Spec->catfile($abs_srcdir, "extra", $extra);
+ my $abs_source = File::Spec->catfile($abs_srcdir, $extra);
+ next unless ($extra =~ m/\.(cpp|h)$/ || (-d $abs_extra)); # C++ Source/Header, or directory
+ if (-l $abs_source) {
+ # Symlink, is it in the right place?
+ my $targ = readlink($abs_source);
+ my $abs_targ = File::Spec->rel2abs($targ, $abs_srcdir);
+ if ($abs_targ eq $abs_extra) {
+ $extras{$extra} = "\e[32;1menabled\e[0m";
+ } else {
+ $extras{$extra} = sprintf("\e[31;1mwrong symlink target (%s)\e[0m", $abs_targ);
+ }
+ } elsif (-e $abs_source) {
+ my ($devext, $inoext) = stat($abs_extra);
+ my ($devsrc, $inosrc, undef, $lnksrc) = stat($abs_source);
+ if ($lnksrc > 1) {
+ if ($devsrc == $devext && $inosrc == $inoext) {
+ $extras{$extra} = "\e[32;1menabled\e[0m";
+ } else {
+ $extras{$extra} = sprintf("\e[31;1mwrong hardlink target (%d:%d)\e[0m", $devsrc, $inosrc);
+ }
+ } else {
+ open my $extfd, "<", $abs_extra;
+ open my $srcfd, "<", $abs_source;
+ local $/ = undef;
+ if (scalar(<$extfd>) eq scalar(<$srcfd>)) {
+ $extras{$extra} = "\e[32;1menabled\e[0m";
+ } else {
+ $extras{$extra} = sprintf("\e[31;1mout of synch (re-copy)\e[0m");
+ }
+ }
+ } else {
+ $extras{$extra} = "\e[33;1mdisabled\e[0m";
+ }
}
- print FH <<EOM;
-# Insp Makefile :p
-#
-# (C) ChatSpike development team
-# Makefile by <Craig\@ChatSpike.net>
-# Makefile version 2 (statically linked core) by <brain\@inspircd.org>
-#
-
-CC = im a cheezeball
-
-CXXFLAGS = -I../include \${FLAGS}
-CPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* //' | grep -v svn)
-RELCPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* /modes\\//' | grep -v svn)
-
-EOM
-
-$se = "socketengine_select";
-if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
- $se = "socketengine_kqueue";
-}
-elsif (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
- $se = "socketengine_epoll";
-}
-
- ###
- # This next section is for cygwin dynamic module builds.
- # Basically, what we do, is build the inspircd core as a library
- # then the main executable uses that. the library is capable of
- # loading / unloading the modules dynamically :)
- # Massive thanks to the guys on #cygwin @ irc.freenode.net for helping
- # make this work :)
- ###
-
- if ($config{OSNAME} =~ /CYGWIN/i) {
- print FH <<EOM;
-all: timer.o command_parse.o cull_list.o userprocess.o socketengine.o socket.o hashcomp.o channels.o mode.o xline.o inspstring.o dns.o base.o configreader.o inspsocket.o $cmdobjs commands.o dynamic.o users.o modules.o wildcard.o helperfuncs.o snomasks.o inspircd.exe
-
-inspircd.exe: inspircd.dll.a
- \$(CC) -o \$@ \$^
-
-inspircd.dll inspircd.dll.a: inspircd.o channels.o mode.o xline.o inspstring.o dns.o base.o configreader.o inspsocket.o $cmdobjs commands.o dynamic.o users.o modules.o wildcard.o helperfuncs.o hashcomp.o socket.o socketengine.o userprocess.o cull_list.o command_parse.o timer.o snomasks.o
- \$(CC) -shared -Wl,--out-implib=inspircd.dll.a -o inspircd.dll \$^
-EOM
- } else {
- print FH <<EOM;
-all: timer.o command_parse.o cull_list.o userprocess.o socketengine.o socket.o hashcomp.o channels.o mode.o xline.o inspstring.o dns.o base.o configreader.o inspsocket.o $cmdobjs commands.o dynamic.o users.o modules.o wildcard.o helperfuncs.o snomasks.o \$(MODULES) inspircd.exe
-
-inspircd.exe: inspircd.cpp ../include/base.h ../include/channels.h ../include/inspircd.h ../include/channels.h ../include/globals.h ../include/inspircd_config.h ../include/base.h
- \$(CC) -I../include \$(FLAGS) inspircd.cpp -o inspircd.exe \$(LDLIBS) channels.o mode.o xline.o inspstring.o dns.o base.o inspsocket.o configreader.o $cmdobjs commands.o dynamic.o users.o modules.o wildcard.o helperfuncs.o hashcomp.o socket.o socketengine.o userprocess.o cull_list.o command_parse.o timer.o snomasks.o modes/modeclasses.a \$(MODULES)
-EOM
+ # Now let's add dependency info
+ for my $extra (keys(%extras)) {
+ next unless $extras{$extra} =~ m/enabled/; # only process enabled extras.
+ my $abs_extra = File::Spec->catfile($abs_srcdir, "extra", $extra);
+ my @deps = split / +/, getdependencies($abs_extra);
+ for my $dep (@deps) {
+ if (exists($extras{$dep})) {
+ my $ref = \$extras{$dep}; # Take reference.
+ if ($$ref !~ m/needed by/) {
+ # First dependency found.
+ if ($$ref =~ m/enabled/) {
+ $$ref .= " (needed by \e[32;1m$extra\e[0m";
+ } else {
+ $$ref =~ s/\e\[.*?m//g; # Strip out previous coloring. Will be set in bold+red+blink later.
+ $$ref .= " (needed by \e[0;32;1;5m$extra\e[0;31;1;5m";
+ }
+ } else {
+ if ($$ref =~ m/enabled/) {
+ $$ref .= ", \e[32;1m$extra\e[0m";
+ } else {
+ $$ref .= ", \e[0;32;1;5m$extra\e[0;31;1;5m";
+ }
+ }
+ }
+ }
}
-
- print FH <<EOM;
-
-cull_list.o: cull_list.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h ../include/users.h ../include/channels.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c cull_list.cpp
-
-snomasks.o: snomasks.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h ../include/channels.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c snomasks.cpp
-
-command_parse.o: command_parse.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c command_parse.cpp
-
-userprocess.o: userprocess.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c userprocess.cpp
-
-socketengine.o: $se.cpp socketengine.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h ../include/$se.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c socketengine.cpp $se.cpp
-
-hashcomp.o: hashcomp.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c hashcomp.cpp
-
-helperfuncs.o: helperfuncs.cpp ../include/base.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c helperfuncs.cpp
-
-channels.o: channels.cpp ../include/base.h ../include/channels.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c channels.cpp
-
-mode.o: mode.cpp ../include/base.h ../include/mode.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h \$(RELCPPFILES) modes/modeclasses.a
- \${MAKE} -C "modes" DIRNAME="src/modes" CC="\$(CC)" \$(MAKEARGS)
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c mode.cpp
-
-xline.o: xline.cpp ../include/base.h ../include/xline.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c xline.cpp
-
-inspstring.o: inspstring.cpp ../include/base.h ../include/inspstring.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspstring.cpp
-
-dns.o: dns.cpp ../include/base.h ../include/dns.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dns.cpp
-
-base.o: base.cpp ../include/base.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c base.cpp
-
-configreader.o: configreader.cpp ../include/base.h ../include/configreader.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c configreader.cpp
-
-commands.o: commands.cpp ../include/base.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h $srcobjs
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c commands.cpp $cmdobjs
-
-dynamic.o: dynamic.cpp ../include/base.h ../include/dynamic.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dynamic.cpp
-
-users.o: users.cpp ../include/base.h ../include/users.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c users.cpp
-
-modules.o: modules.cpp ../include/base.h ../include/modules.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c modules.cpp
-
-wildcard.o: wildcard.cpp ../include/base.h ../include/wildcard.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c wildcard.cpp
-
-socket.o: socket.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c socket.cpp
-
-inspsocket.o: inspsocket.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspsocket.cpp
-
-timer.o: timer.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c timer.cpp
-
-EOM
- foreach my $cmd (@cmdlist) {
- print FH <<ITEM;
-cmd_$cmd.o: cmd_$cmd.cpp ../include/base.h ../include/modules.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h ../include/commands/cmd_$cmd.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
-ITEM
+ for my $extra (sort {$a cmp $b} keys(%extras)) {
+ my $text = $extras{$extra};
+ if ($text =~ m/needed by/ && $text !~ m/enabled/) {
+ printf "\e[31;1;5m%-*s = %s%s\e[0m\n", $maxlen, $extra, $text, ($text =~ m/needed by/ ? ")" : "");
+ } else {
+ printf "%-*s = %s%s\n", $maxlen, $extra, $text, ($text =~ m/needed by/ ? "\e[0m)" : "");
+ }
}
- close(FH);
+ return keys(%extras) if wantarray; # Can be used by manage_extras.
}
-sub write_dynamic_makefile {
-
- my $i = 0;
- my @cmdlist = ();
- opendir(DIRHANDLE, "src");
- foreach $name (sort readdir(DIRHANDLE)) {
- if ($name =~ /^cmd_(.+)\.cpp$/) {
- $cmdlist[$i++] = $1;
- }
- }
- closedir(DIRHANDLE);
-
- my $cmdobjs = "";
- my $srcobjs = "";
- foreach my $cmd (@cmdlist) {
- $cmdobjs = $cmdobjs . "cmd_$cmd.so ";
- $srcobjs = $srcobjs . "cmd_$cmd.cpp ";
- }
-
- $se = "socketengine_select";
- if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
- $se = "socketengine_kqueue";
- }
- elsif (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
- $se = "socketengine_epoll";
- }
-
- open(FH,">src/Makefile") or die("Could not write src/Makefile");
- print FH <<EOM;
-# Insp Makefile :p
-#
-# (C) ChatSpike development team
-# Makefile by <Craig\@ChatSpike.net>
-# Makefile version 2 (dynamically linked core) by <brain\@inspircd.org>
-#
-
-CC = im a cheezeball
-
-CXXFLAGS = -I../include \${FLAGS}
-CPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* //' | grep -v svn)
-RELCPPFILES = \$(shell /bin/ls -l modes/ | grep '\\.cpp' | sed 's/^.* /modes\\//' | grep -v svn)
-
-all: libIRCDtimer.so libIRCDcull_list.so libIRCDuserprocess.so libIRCDsocketengine.so libIRCDsocket.so libIRCDhash.so libIRCDchannels.so libIRCDmode.so libIRCDxline.so libIRCDstring.so libIRCDasyncdns.so libIRCDbase.so libIRCDconfigreader.so libIRCDinspsocket.so $cmdobjs libIRCDcommands.so libIRCDdynamic.so libIRCDusers.so libIRCDmodules.so libIRCDwildcard.so libIRCDhelper.so libIRCDcommand_parse.so libIRCDsnomasks.so inspircd
-
-inspircd: inspircd.cpp ../include/base.h ../include/channels.h ../include/inspircd.h ../include/channels.h ../include/globals.h ../include/inspircd_config.h ../include/socket.h libIRCDtimer.so libIRCDcull_list.so libIRCDuserprocess.so libIRCDsocketengine.so libIRCDsocket.so libIRCDhash.so libIRCDchannels.so libIRCDmode.so libIRCDxline.so libIRCDstring.so libIRCDasyncdns.so libIRCDbase.so libIRCDconfigreader.so libIRCDinspsocket.so $cmdobjs libIRCDsnomasks.so libIRCDcommands.so libIRCDdynamic.so libIRCDusers.so libIRCDmodules.so libIRCDwildcard.so libIRCDhelper.so libIRCDcommand_parse.so
- \$(CC) -pipe -I../include $extra -Wl,--rpath -Wl,$config{LIBRARY_DIR} \$(FLAGS) -rdynamic -L. inspircd.cpp -o inspircd \$(LDLIBS) libIRCDchannels.so libIRCDmode.so libIRCDxline.so libIRCDstring.so libIRCDasyncdns.so libIRCDbase.so libIRCDconfigreader.so libIRCDinspsocket.so libIRCDcommands.so libIRCDdynamic.so libIRCDusers.so libIRCDmodules.so libIRCDwildcard.so libIRCDhelper.so libIRCDhash.so libIRCDsocket.so libIRCDsocketengine.so libIRCDuserprocess.so libIRCDcull_list.so libIRCDcommand_parse.so libIRCDtimer.so libIRCDsnomasks.so
-
-libIRCDsocketengine.so: $se.cpp socketengine.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h ../include/$se.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c socketengine.cpp $se.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDsocketengine.so socketengine.o $se.o
-
-libIRCDsnomasks.so: snomasks.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h ../include/channels.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c snomasks.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDsnomasks.so snomasks.o
-
-libIRCDcommand_parse.so: command_parse.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c command_parse.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDcommand_parse.so command_parse.o
-
-libIRCDcull_list.so: cull_list.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h ../include/users.h ../include/channels.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c cull_list.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDcull_list.so cull_list.o
-
-libIRCDuserprocess.so: userprocess.cpp ../include/base.h ../include/hashcomp.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c userprocess.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDuserprocess.so userprocess.o
-
-libIRCDhash.so: hashcomp.cpp ../include/base.h ../include/hashcomp.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c hashcomp.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDhash.so hashcomp.o
-
-libIRCDhelper.so: helperfuncs.cpp ../include/base.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c helperfuncs.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDhelper.so helperfuncs.o
-
-libIRCDchannels.so: channels.cpp ../include/base.h ../include/channels.h ../include/inspircd.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c channels.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDchannels.so channels.o
-
-libIRCDmode.so: mode.cpp ../include/base.h ../include/mode.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h \$(RELCPPFILES)
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c mode.cpp
- \${MAKE} -C "modes" DIRNAME="src/modes" CC="\$(CC)" \$(MAKEARGS) CPPFILES="\$(CPPFILES)"
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDmode.so mode.o modes/modeclasses.a
-
-libIRCDxline.so: xline.cpp ../include/base.h ../include/xline.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c xline.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDxline.so xline.o
-
-libIRCDstring.so: inspstring.cpp ../include/base.h ../include/inspstring.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspstring.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDstring.so inspstring.o
-
-libIRCDasyncdns.so: dns.cpp ../include/base.h ../include/dns.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dns.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDasyncdns.so dns.o
-
-libIRCDbase.so: base.cpp ../include/base.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c base.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDbase.so base.o
-
-libIRCDconfigreader.so: configreader.cpp ../include/base.h ../include/configreader.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c configreader.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDconfigreader.so configreader.o
-
-libIRCDcommands.so: commands.cpp ../include/base.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c commands.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDcommands.so commands.o
-
-libIRCDdynamic.so: dynamic.cpp ../include/base.h ../include/dynamic.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c dynamic.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDdynamic.so dynamic.o
-
-libIRCDusers.so: users.cpp ../include/base.h ../include/users.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c users.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDusers.so users.o
-
-libIRCDmodules.so: modules.cpp ../include/base.h ../include/modules.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c modules.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDmodules.so modules.o
-
-libIRCDwildcard.so: wildcard.cpp ../include/base.h ../include/wildcard.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c wildcard.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDwildcard.so wildcard.o
-
-libIRCDsocket.so: socket.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c socket.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDsocket.so socket.o
-
-libIRCDinspsocket.so: inspsocket.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c inspsocket.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDinspsocket.so inspsocket.o
-
-libIRCDtimer.so: timer.cpp ../include/base.h ../include/inspircd.h ../include/globals.h ../include/inspircd_config.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c timer.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o libIRCDtimer.so timer.o
-
-EOM
- foreach my $cmd (@cmdlist) {
- print FH <<ITEM;
-cmd_$cmd.so: cmd_$cmd.cpp ../include/base.h ../include/modules.h ../include/inspircd.h ../include/channels.h ../include/users.h ../include/globals.h ../include/inspircd_config.h ../include/commands/cmd_$cmd.h
- \$(CC) -pipe -I../include \$(FLAGS) -export-dynamic -c cmd_$cmd.cpp
- \$(CC) -pipe -Wl,--rpath -Wl,$config{LIBRARY_DIR} -shared -o cmd_$cmd.so cmd_$cmd.o
-
-ITEM
+sub enable_extras (@) {
+ my (@extras) = @_;
+ for my $extra (@extras) {
+ my $extrapath = "src/modules/extra/$extra";
+ if (!-e $extrapath) {
+ print STDERR "Cannot enable \e[32;1m$extra\e[0m : No such file or directory in src/modules/extra\n";
+ next;
+ }
+ my $source = "src/modules/$extra";
+ if (-e $source) {
+ print STDERR "Cannot enable \e[32;1m$extra\e[0m : destination in src/modules exists (might already be enabled?)\n";
+ next;
+ }
+ # Get dependencies, and add them to be processed.
+ my @deps = split / +/, getdependencies($extrapath);
+ for my $dep (@deps) {
+ next if scalar(grep { $_ eq $dep } (@extras)) > 0; # Skip if we're going to be enabling it anyway.
+ if (!-e "src/modules/$dep") {
+ if (-e "src/modules/extra/$dep") {
+ print STDERR "Will also enable extra \e[32;1m$dep\e[0m (needed by \e[32;1m$extra\e[0m)\n";
+ push @extras, $dep;
+ } else {
+ print STDERR "\e[33;1mWARNING:\e[0m module \e[32;1m$extra\e[0m might be missing dependency \e[32;1m$dep\e[0m - YOU are responsible for satisfying it!\n";
+ }
+ }
+ }
+ print "Enabling $extra ... \n";
+ symlink "extra/$extra", $source or print STDERR "$source: Cannot link to 'extra/$extra': $!\n";
}
- close(FH);
}
-sub showhelp
+sub disable_extras (@)
{
- chomp($PWD = `pwd`);
- print "Usage: configure [options]
-
-*** NOTE: NON-INTERACTIVE CONFIGURE IS *NOT* SUPPORTED BY THE ***
-*** INSPIRCD DEVELOPMENT TEAM. DO NOT ASK FOR HELP REGARDING ***
-*** NON-INTERACTIVE CONFIGURE ON THE FORUMS OR ON IRC! ***
-
-Options: [defaults in brackets after descriptions]
-
-When no options are specified, interactive
-configuration is started and you must specify
-any required values manually. If one or more
-options are specified, non-interactive configuration
-is started, and any omitted values are defaulted.
-
-Arguments with a single \"-\" symbol, as in
-InspIRCd 1.0.x, are also allowed.
-
- --disable-interactive Sets no options intself, but
- will disable any interactive prompting.
- --update Update makefiles and dependencies
- --modupdate Detect new modules and write makefiles
- --svnupdate {rebuild} Update working copy via subversion
- {and optionally rebuild it}
- --clean Remove .config.cache file and go interactive
- --enable-gnutls Enable GnuTLS module [no]
- --enable-openssl Enable OpenSSL module [no]
- --with-nick-length=[n] Specify max. nick length [32]
- --with-channel-length=[n] Specify max. channel length [64]
- --with-max-channels=[n] Specify max. number of channels
- a normal user may join [20]
- --with-max-oper-channels=[n] Specify max. number of channels
- an irc operator may join [60]
- --with-max-clients=[n] Specify maximum number of users
- which may connect locally
- --enable-optimization=[n] Optimize using -O[n] gcc flag
- --enable-epoll Enable epoll() where supported [set]
- --enable-kqueue Enable kqueue() where supported [set]
- --disable-epoll Do not enable epoll(), fall back
- to select() [not set]
- --disable-kqueue Do not enable kqueue(), fall back
- to select() [not set]
- --enable-ipv6 Build ipv6 native InspIRCd [no]
- --enable-remote-ipv6 Build with ipv6 support for remote
- servers on the network [yes]
- --disable-remote-ipv6 Do not allow remote ipv6 servers [not set]
- --with-cc=[filename] Use an alternative g++ binary to
- build InspIRCd [g++]
- --with-ident-length=[n] Specify max length of ident [12]
- --with-quit-length=[n] Specify max length of quit [200]
- --with-topic-length=[n] Specify max length of topic [350]
- --with-kick-length=[n] Specify max length of kick [200]
- --with-gecos-length=[n] Specify max length of gecos [150]
- --with-away-length=[n] Specify max length of away [150]
- --with-max-modes=[n] Specify max modes per line which
- have parameters [20]
- --prefix=[directory] Base directory to install into (if defined,
- can automatically define config, module, bin
- and library dirs as subdirectories of prefix)
- [$PWD]
- --config-dir=[directory] Config file directory for config and SSL certs
- [$PWD/conf]
- --module-dir=[directory] Modules directory for loadable modules
- [$PWD/modules]
- --binary-dir=[directory] Binaries directory for core binary
- [$PWD/bin]
- --library-dir=[directory] Library directory for core libraries
- [$PWD/lib]
- --help Show this help text and exit
-
-";
- exit(0);
+ opendir my $dd, "src/modules/extra/";
+ my @files = readdir($dd);
+ closedir $dd;
+ my (@extras) = @_;
+EXTRA: for my $extra (@extras) {
+ my $extrapath = "src/modules/extra/$extra";
+ my $source = "src/modules/$extra";
+ if (!-e $extrapath) {
+ print STDERR "Cannot disable \e[32;1m$extra\e[0m : Is not an extra\n";
+ next;
+ }
+ if ((! -l $source) || readlink($source) ne "extra/$extra") {
+ print STDERR "Cannot disable \e[32;1m$extra\e[0m : Source is not a link or doesn't refer to the right file. Remove manually if this is in error.\n";
+ next;
+ }
+ # Check if anything needs this.
+ for my $file (@files) {
+ my @deps = split / +/, getdependencies("src/modules/extra/$file");
+ # File depends on this extra...
+ if (scalar(grep { $_ eq $extra } @deps) > 0) {
+ # And is both enabled and not about to be disabled.
+ if (-e "src/modules/$file" && scalar(grep { $_ eq $file } @extras) < 1) {
+ print STDERR "Cannot disable \e[32;1m$extra\e[0m : is needed by \e[32;1m$file\e[0m\n";
+ next EXTRA;
+ }
+ }
+ }
+ # Now remove.
+ print "Disabling $extra ... \n";
+ unlink "src/modules/$extra" or print STDERR "Cannot disable \e[32;1m$extra\e[0m : $!\n";
+ }
}