#
# InspIRCd -- Internet Relay Chat Daemon
#
+# Copyright (C) 2012-2017 Peter Powell <petpow@saberuk.com>
# Copyright (C) 2009-2010 Daniel De Graaf <danieldg@inspircd.org>
# Copyright (C) 2007, 2009 Dennis Friis <peavey@inspircd.org>
# Copyright (C) 2003, 2006-2008 Craig Edwards <craigedwards@brainbox.cc>
BEGIN {
- require 5.8.0;
+ require 5.10.0;
}
+use feature ':5.10';
use strict;
use warnings FATAL => qw(all);
-use File::Copy ();
-use Socket;
-use Cwd;
-use Getopt::Long;
+use File::Basename qw(basename);
+use File::Copy ();
+use File::Spec::Functions qw(rel2abs);
+use FindBin qw($RealDir);
+use Getopt::Long qw(GetOptions);
+use POSIX qw(getgid getuid);
-# Utility functions for our buildsystem
-use make::utilities;
+use lib $RealDir;
+use make::common;
use make::configure;
-use make::gnutlscert;
-use make::opensslcert;
-
-###############################################################################################
-#
-# NON-EDITABLE VARIABLES
-#
-###############################################################################################
-
-our ($opt_use_gnutls, $opt_rebuild, $opt_use_openssl, $opt_nointeractive, $opt_ports,
- $opt_epoll, $opt_kqueue, $opt_noports, $opt_noepoll, $opt_nokqueue,
- $opt_noipv6, $opt_maxbuf, $opt_disable_debug, $opt_freebsd_port,
- $opt_system, $opt_uid);
-
-our ($opt_cc, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir, $opt_data_dir, $opt_log_dir);
+use make::console;
+use make::directive;
+
+my ($opt_binary_dir,
+ $opt_config_dir,
+ $opt_data_dir,
+ $opt_development,
+ $opt_disable_interactive,
+ $opt_distribution_label,
+ $opt_gid,
+ $opt_log_dir,
+ $opt_manual_dir,
+ $opt_module_dir,
+ $opt_prefix,
+ $opt_socketengine,
+ $opt_system,
+ $opt_uid);
sub list_extras ();
my @opt_enableextras;
my @opt_disableextras;
-GetOptions (
- 'enable-gnutls' => \$opt_use_gnutls,
- 'rebuild' => \$opt_rebuild,
- 'system' => \$opt_system,
- 'uid=s' => \$opt_uid,
- 'enable-openssl' => \$opt_use_openssl,
- 'disable-interactive' => \$opt_nointeractive,
- 'enable-ports' => \$opt_ports,
- 'enable-epoll' => \$opt_epoll,
- 'enable-kqueue' => \$opt_kqueue,
- 'disable-ports' => \$opt_noports,
- 'disable-epoll' => \$opt_noepoll,
- 'disable-kqueue' => \$opt_nokqueue,
- 'disable-ipv6' => \$opt_noipv6,
- 'with-cc=s' => \$opt_cc,
- 'with-maxbuf=i' => \$opt_maxbuf,
- 'enable-freebsd-ports-openssl' => \$opt_freebsd_port,
- 'prefix=s' => \$opt_base_dir,
- 'config-dir=s' => \$opt_config_dir,
- 'module-dir=s' => \$opt_module_dir,
- 'binary-dir=s' => \$opt_binary_dir,
- 'data-dir=s' => \$opt_data_dir,
- 'log-dir=s' => \$opt_log_dir,
- 'disable-debuginfo' => sub { $opt_disable_debug = 1 },
- 'help' => sub { showhelp(); },
- 'update' => sub { update(); },
- 'clean' => sub { clean(); },
- 'list-extras' => sub { list_extras; exit 0; }, # This, --enable-extras, and --disable-extras are for non-interactive managing.
- 'enable-extras=s@' => \@opt_enableextras, # ^
- 'disable-extras=s@' => \@opt_disableextras, # ^
- 'generate-openssl-cert' => sub { make_openssl_cert(); exit(0); },
- 'generate-gnutls-cert' => sub { make_gnutls_cert(); exit(0); }
+GetOptions(
+ 'clean' => \&cmd_clean,
+ 'help' => \&cmd_help,
+ 'update' => \&cmd_update,
+
+ 'development' => \$opt_development,
+ 'disable-interactive' => \$opt_disable_interactive,
+ 'distribution-label=s' => \$opt_distribution_label,
+ 'binary-dir=s' => \$opt_binary_dir,
+ 'config-dir=s' => \$opt_config_dir,
+ 'data-dir=s' => \$opt_data_dir,
+ 'gid=s' => \$opt_gid,
+ 'log-dir=s' => \$opt_log_dir,
+ 'manual-dir=s' => \$opt_manual_dir,
+ 'module-dir=s' => \$opt_module_dir,
+ 'prefix=s' => \$opt_prefix,
+ 'socketengine=s' => \$opt_socketengine,
+ 'system' => \$opt_system,
+ 'uid=s' => \$opt_uid,
+
+ # TODO: when the modulemanager rewrite is done these should be removed.
+ 'disable-extras=s@' => \@opt_disableextras,
+ 'enable-extras=s@' => \@opt_enableextras,
+ 'list-extras' => sub { list_extras; exit 0; },
);
if (scalar(@opt_enableextras) + scalar(@opt_disableextras) > 0) {
}
our $interactive = !(
- (defined $opt_base_dir) ||
- (defined $opt_config_dir) ||
- (defined $opt_module_dir) ||
- (defined $opt_base_dir) ||
- (defined $opt_binary_dir) ||
- (defined $opt_data_dir) ||
- (defined $opt_log_dir) ||
- (defined $opt_nointeractive) ||
- (defined $opt_cc) ||
- (defined $opt_noipv6) ||
- (defined $opt_kqueue) ||
- (defined $opt_epoll) ||
- (defined $opt_ports) ||
- (defined $opt_use_openssl) ||
- (defined $opt_nokqueue) ||
- (defined $opt_noepoll) ||
- (defined $opt_noports) ||
- (defined $opt_maxbuf) ||
- (defined $opt_system) ||
- (defined $opt_uid) ||
- (defined $opt_use_gnutls) ||
- (defined $opt_freebsd_port)
+ !-t STDIN ||
+ !-t STDOUT ||
+ defined $opt_binary_dir ||
+ defined $opt_config_dir ||
+ defined $opt_data_dir ||
+ defined $opt_development ||
+ defined $opt_disable_interactive ||
+ defined $opt_distribution_label ||
+ defined $opt_gid ||
+ defined $opt_log_dir ||
+ defined $opt_manual_dir ||
+ defined $opt_module_dir ||
+ defined $opt_prefix ||
+ defined $opt_socketengine ||
+ defined $opt_system ||
+ defined $opt_uid
);
-chomp(our $topdir = getcwd());
-our $this = resolve_directory($topdir); # PWD, Regardless.
-our @modlist = (); # Declare for Module List..
-our %config = (); # Initiate Configuration Hash..
-our $cache_loaded = getcache();
-$config{ME} = resolve_directory($topdir); # Present Working Directory
-
-$config{BASE_DIR} ||= $config{ME}."/run";
-
-if (defined $opt_base_dir) {
- $config{BASE_DIR} = $opt_base_dir;
-} elsif (defined $opt_system) {
- $config{BASE_DIR} = '/var/lib/inspircd';
-}
-
-if (defined $opt_system) {
- $config{UID} = $opt_uid || 'ircd';
- $config{CONFIG_DIR} = '/etc/inspircd';
- $config{MODULE_DIR} = '/usr/lib/inspircd';
- $config{BINARY_DIR} = '/usr/sbin/';
- $config{BUILD_DIR} = resolve_directory($config{ME}."/build"); # Build Directory
- $config{DATA_DIR} = '/var/inspircd';
- $config{LOG_DIR} = '/var/log/inspircd';
-} else {
- $config{UID} = $opt_uid || $config{UID} || $<;
- $config{CONFIG_DIR} ||= resolve_directory($config{BASE_DIR}."/conf"); # Configuration Directory
- $config{MODULE_DIR} ||= resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
- $config{BINARY_DIR} ||= resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
- $config{BUILD_DIR} ||= resolve_directory($config{ME}."/build"); # Build Directory
- $config{DATA_DIR} ||= resolve_directory($config{BASE_DIR}."/data"); # Data directory
- $config{LOG_DIR} ||= resolve_directory($config{BASE_DIR}."/logs"); # Log directory
-}
-
-if (defined $opt_config_dir) {
- $config{CONFIG_DIR} = $opt_config_dir;
-}
-if (defined $opt_module_dir) {
- $config{MODULE_DIR} = $opt_module_dir;
-}
-if (defined $opt_binary_dir) {
- $config{BINARY_DIR} = $opt_binary_dir;
-}
-if (defined $opt_data_dir) {
- $config{DATA_DIR} = $opt_data_dir;
-}
-if (defined $opt_log_dir) {
- $config{LOG_DIR} = $opt_log_dir;
-}
-chomp($config{HAS_GNUTLS} = `pkg-config --modversion gnutls 2>/dev/null`); # GNUTLS Version.
-
-if (defined $opt_freebsd_port)
-{
- chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`);
- chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`);
- $config{USE_FREEBSD_BASE_SSL} = "n";
-}
-else
-{
- if ($^O eq "freebsd")
- {
- # default: use base ssl
- chomp($config{HAS_OPENSSL} = `openssl version | cut -d ' ' -f 2`); # OpenSSL version, freebsd specific
- chomp($config{HAS_OPENSSL_PORT} = `pkg-config --modversion openssl 2>/dev/null`); # Port version, may be different
- }
- else
- {
- chomp($config{HAS_OPENSSL} = `pkg-config --modversion openssl 2>/dev/null`); # Openssl version, others
- $config{HAS_OPENSSL_PORT} = "";
- $config{USE_FREEBSD_BASE_SSL} = "n";
- }
-}
-
-chomp(our $gnutls_ver = $config{HAS_GNUTLS});
-chomp(our $openssl_ver = $config{HAS_OPENSSL});
-$config{USE_GNUTLS} ||= "n";
-if (defined $opt_use_gnutls)
-{
- $config{USE_GNUTLS} = "y"; # Use gnutls.
-}
-$config{USE_OPENSSL} ||= "n"; # Use openssl.
-if (defined $opt_use_openssl)
-{
- $config{USE_OPENSSL} = "y";
-}
-
-if (!defined $opt_disable_debug) {
- $config{OPTIMISATI} = "-g1"; # Optimisation Flag
-} else {
- $config{OPTIMISATI} = "-O2";
-}
-
-$config{HAS_STRLCPY} = "false"; # strlcpy Check.
-$config{HAS_STDINT} = "false"; # stdint.h check
-$config{USE_KQUEUE} = "y"; # kqueue enabled
-if (defined $opt_nokqueue) {
- $config{USE_KQUEUE} = "n";
-}
-$config{USE_POLL} = "y"; # poll enabled
-$config{USE_EPOLL} = "y"; # epoll enabled
-if (defined $opt_noepoll)
-{
- $config{USE_EPOLL} = "n";
-}
-$config{USE_PORTS} = "y"; # epoll enabled
-if (defined $opt_noports)
-{
- $config{USE_PORTS} = "n";
-}
-$config{_SOMAXCONN} = SOMAXCONN; # Max connections in accept queue
-$config{OSNAME} = $^O; # Operating System Name
-$config{IS_DARWIN} = "NO"; # Is OSX?
-$config{STARTSCRIPT} = "inspircd"; # start script?
-$config{DESTINATION} = "BASE"; # Is target path.
-if ($config{OSNAME} =~ /darwin/i)
-{
- $config{IS_DARWIN} = "YES";
- $config{STARTSCRIPT} = "org.inspircd.plist"; # start script for OSX.
- $config{CC} = "xcrun clang++"; # C++ compiler for OSX.
-}
-elsif ($config{OSNAME} =~ /freebsd/i)
-{
- chomp(my $fbsd_version = `uname -r`);
- $config{CC} = $fbsd_version ge '10.0' ? 'clang++' : 'g++';
-}
-else
-{
- $config{CC} = "g++"; # C++ compiler
-}
-if (defined $opt_cc)
-{
- $config{CC} = $opt_cc;
-}
-our $exec = $config{CC} . " -dumpversion | cut -c 1";
-chomp($config{GCCVER} = `$exec`); # Major GCC Version
-$exec = $config{CC} . " -dumpversion | cut -c 3";
-chomp($config{GCCMINOR} = `$exec`);
-$config{MAXBUF} = "512"; # Max buffer size
-
-if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)(?:[a-z])?(?:\-[a-z][0-9])?/) {
- $config{HAS_OPENSSL} = $1;
-} else {
- $config{HAS_OPENSSL} = "";
-}
-
-if (($config{GCCVER} eq "") || ($config{GCCMINOR} eq "")) {
- print "`$config{CC}` was not found! A C++ compiler is required to build InspIRCd!\n";
- print "You can pass a custom compiler to $0 using --with-cc=[name].\n";
- exit;
-}
-
-# Get and Set some important vars..
-getmodules();
-
-sub clean
-{
- unlink(".config.cache");
-}
-
-our ($has_epoll, $has_ports, $has_kqueue) = (0, 0, 0);
+my %version = get_version $opt_distribution_label;
+print_format "<|BOLD Configuring InspIRCd $version{FULL} on $^O.|>\n";
-sub update
-{
- eval {
- chomp($topdir = getcwd());
- $this = resolve_directory($topdir); # PWD, Regardless.
- getmodules();
- # Does the cache file exist?
- if (!getcache()) {
- # No, No it doesn't.. *BASH*
- print "You have not run ./configure before. Please do this before trying to run the update script.\n";
- exit 0;
- } else {
- # We've Loaded the cache file and all our variables..
- print "Updating files...\n";
- if (defined($opt_disable_debug) && $opt_disable_debug == 1)
- {
- print "Disabling debug information (-g).\n";
- $config{OPTIMISATI} = "";
- }
- $has_epoll = $config{HAS_EPOLL};
- $has_ports = $config{HAS_PORTS};
- $has_kqueue = $config{HAS_KQUEUE};
- writefiles(1);
- makecache();
- print "Complete.\n";
- exit;
- }
- };
- if ($@)
- {
- print "Configure update failed: $@\n";
+my %config;
+if ($interactive) {
+ %config = read_config_file(CONFIGURE_CACHE_FILE);
+ run_test CONFIGURE_CACHE_FILE, %config;
+ if (!defined $config{VERSION}) {
+ $config{VERSION} = CONFIGURE_CACHE_VERSION;
+ } elsif ($config{VERSION} != CONFIGURE_CACHE_VERSION) {
+ print_warning "ignoring contents of ${\CONFIGURE_CACHE_FILE} as it was generated by an incompatible version of $0!";
+ %config = ('VERSION', CONFIGURE_CACHE_VERSION);
}
- exit;
-}
-
-
-sub test_compile {
- my $feature = shift;
- my $fail = 0;
- $fail ||= system "$config{CC} -o test_$feature make/check_$feature.cpp >/dev/null 2>&1";
- $fail ||= system "./test_$feature";
- unlink "test_$feature";
- return !$fail;
}
-print "Running non-interactive configure...\n" unless $interactive;
-print "Checking for cache from previous configure... ";
-print ($cache_loaded ? "found\n" : "not found\n");
-$config{SYSTEM} = lc $^O;
-print "Checking operating system version... $config{SYSTEM}\n";
-
-$exec = $config{CC} . " -dumpversion | cut -c 1";
-chomp($config{GCCVER} = `$exec`); # Major GCC Version
-$exec = $config{CC} . " -dumpversion | cut -c 3";
-chomp($config{GCCMINOR} = `$exec`);
-
-printf "Checking if stdint.h exists... ";
-$config{HAS_STDINT} = "true";
-our $fail = 0;
-open(STDINT, "</usr/include/stdint.h") or $config{HAS_STDINT} = "false";
-if ($config{HAS_STDINT} eq "true") {
- close(STDINT);
-}
-print "yes\n" if $config{HAS_STDINT} eq "true";
-print "no\n" if $config{HAS_STDINT} eq "false";
-
-printf "Checking if strlcpy exists... ";
-# Perform the strlcpy() test..
-$config{HAS_STRLCPY} = "false";
-$fail = 0;
-open(STRLCPY, "</usr/include/string.h") or $fail = 1;
-if (!$fail) {
- while (defined(my $line = <STRLCPY>)) {
- chomp($line);
- # try and find the delcaration of:
- # size_t strlcpy(...)
- if ($line =~ /size_t(\0x9|\s)+strlcpy/) {
- $config{HAS_STRLCPY} = "true";
- }
+$config{CXX} = find_compiler($config{CXX} // $ENV{CXX});
+unless ($config{CXX}) {
+ say 'A suitable C++ compiler could not be detected on your system!';
+ unless ($interactive) {
+ say 'Set the CXX environment variable to the path to a C++ compiler binary if this is incorrect.';
+ exit 1;
}
- close(STRLCPY);
-}
-print "yes\n" if $config{HAS_STRLCPY} eq "true";
-print "no\n" if $config{HAS_STRLCPY} eq "false";
-
-printf "Checking if kqueue exists... ";
-$has_kqueue = 0;
-$fail = 0;
-open(KQUEUE, "</usr/include/sys/event.h") or $fail = 1;
-if (!$fail) {
- while (defined(my $line = <KQUEUE>)) {
- chomp($line);
- # try and find the delcaration of:
- # int kqueue(void);
- if ($line =~ /int(\0x9|\s)+kqueue/) {
- $has_kqueue = 1;
- }
+ until ($config{CXX}) {
+ my $compiler_path = prompt_string 1, 'Please enter the path to a C++ compiler binary:', 'c++';
+ $config{CXX} = find_compiler $compiler_path;
}
- close(KQUEUE);
}
-print "yes\n" if $has_kqueue == 1;
-print "no\n" if $has_kqueue == 0;
+my %compiler = get_compiler_info($config{CXX});
-printf "Checking for epoll support... ";
-$has_epoll = test_compile('epoll');
-print $has_epoll ? "yes\n" : "no\n";
+$config{HAS_CLOCK_GETTIME} = run_test 'clock_gettime()', test_file($config{CXX}, 'clock_gettime.cpp', $^O eq 'darwin' ? undef : '-lrt');
+$config{HAS_EVENTFD} = run_test 'eventfd()', test_file($config{CXX}, 'eventfd.cpp');
-printf "Checking for eventfd support... ";
-$config{HAS_EVENTFD} = test_compile('eventfd') ? 'true' : 'false';
-print $config{HAS_EVENTFD} eq 'true' ? "yes\n" : "no\n";
+my @socketengines;
+push @socketengines, 'epoll' if run_test 'epoll', test_header $config{CXX}, 'sys/epoll.h';
+push @socketengines, 'kqueue' if run_test 'kqueue', test_file $config{CXX}, 'kqueue.cpp';
+push @socketengines, 'ports' if run_test 'Solaris IOCP', test_header $config{CXX}, 'port.h';
+push @socketengines, 'poll' if run_test 'poll', test_header $config{CXX}, 'poll.h';
+push @socketengines, 'select';
-printf "Checking if Solaris I/O completion ports are available... ";
-$has_ports = 0;
-our $system = `uname -s`;
-chomp ($system);
-$has_ports = 1 if ($system eq "SunOS");
-
-if ($has_ports) {
- my $kernel = `uname -r`;
- chomp($kernel);
- if (($kernel !~ /^5\.1./)) {
- $has_ports = 0;
+if (defined $opt_socketengine) {
+ unless (grep { $_ eq $opt_socketengine } @socketengines) {
+ my $reason = -f "src/socketengines/socketengine_$opt_socketengine.cpp" ? 'is not available on this platform' : 'does not exist';
+ print_error "The socket engine you requested ($opt_socketengine) $reason!",
+ 'Available socket engines are:',
+ map { " * $_" } @socketengines;
}
}
-print "yes\n" if $has_ports == 1;
-print "no\n" if $has_ports == 0;
-
-$config{HAS_EPOLL} = $has_epoll;
-$config{HAS_KQUEUE} = $has_kqueue;
+$config{SOCKETENGINE} = $opt_socketengine // $socketengines[0];
-printf "Checking for libgnutls... ";
-if (defined($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS}) || ($config{HAS_GNUTLS} eq "y"))) {
- if (defined($gnutls_ver) && ($gnutls_ver ne "")) {
- print "yes\n";
- $config{HAS_GNUTLS} = "y";
- } else {
- print "no\n";
- $config{HAS_GNUTLS} = "n";
- }
+if (defined $opt_system) {
+ $config{BASE_DIR} = $opt_prefix // '/var/lib/inspircd';
+ $config{BINARY_DIR} = $opt_binary_dir // '/usr/sbin';
+ $config{CONFIG_DIR} = $opt_config_dir // '/etc/inspircd';
+ $config{DATA_DIR} = $opt_data_dir // '/var/inspircd';
+ $config{LOG_DIR} = $opt_module_dir // '/var/log/inspircd';
+ $config{MANUAL_DIR} = $opt_manual_dir // '/usr/share/man/man1';
+ $config{MODULE_DIR} = $opt_module_dir // '/usr/lib/inspircd';
} else {
- print "no\n";
- $config{HAS_GNUTLS} = "n";
-}
-
-printf "Checking for openssl... ";
-if (defined($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL}) || ($config{HAS_OPENSSL} eq "y"))) {
- if (defined($openssl_ver) && ($openssl_ver ne "")) {
- print "yes\n";
- $config{HAS_OPENSSL} = "y";
- } else {
- print "no\n";
- $config{HAS_OPENSSL} = "n";
- }
+ $config{BASE_DIR} = $opt_prefix // $config{BASE_DIR} // rel2abs 'run';
+ $config{BINARY_DIR} = $opt_binary_dir // $config{BINARY_DIR} // rel2abs $config{BASE_DIR} . '/bin';
+ $config{CONFIG_DIR} = $opt_config_dir // $config{CONFIG_DIR} // rel2abs $config{BASE_DIR} . '/conf';
+ $config{DATA_DIR} = $opt_data_dir // $config{DATA_DIR} // rel2abs $config{BASE_DIR} . '/data';
+ $config{LOG_DIR} = $opt_log_dir // $config{LOG_DIR} // rel2abs $config{BASE_DIR} . '/logs';
+ $config{MANUAL_DIR} = $opt_manual_dir // $config{MANUAL_DIR} // rel2abs $config{BASE_DIR} . '/manuals';
+ $config{MODULE_DIR} = $opt_module_dir // $config{MODULE_DIR} // rel2abs $config{BASE_DIR} . '/modules';
+}
+
+# Parse --gid=123 or --gid=foo and extract the group id.
+my @group;
+if (defined $opt_gid) {
+ @group = $opt_gid =~ /^\d+$/ ? getgrgid($opt_gid) : getgrnam($opt_gid);
+ print_error "there is no '$opt_gid' group on this system!" unless @group;
} else {
- print "no\n";
- $config{HAS_OPENSSL} = "n";
-}
-
-printf "Checking if you are running an ancient, unsupported OS... ";
-if ($config{OSNAME} =~ /FreeBSD/i)
-{
- my $version = `uname -r`;
- if ($version =~ /^4\./)
- {
- print "yes.\n";
- print "FreeBSD 4.x is no longer supported. By ANYONE.\n";
- print "To build, you will need to add the following to CXXFLAGS:\n";
- print "\t-L/usr/local/lib -lgnugetopt -DHAVE_DECL_GETOPT=1\n";
- }
- else
- {
- print "no ($version)\n";
- }
-}
-else
-{
- print "no ($config{OSNAME})\n";
-}
-
-################################################################################
-# BEGIN INTERACTIVE PART #
-################################################################################
-
-# Clear the Screen..
-if ($interactive)
-{
- print "\e[2J\e[0G\e[0d"; # J = Erase in Display, 2 = Entire Screen, (G, d) = Move cursor to (..,..)
- my $wholeos = $^O;
-
- my $rev = getrevision();
- # Display Introduction Message..
- print <<"STOP" ;
-Welcome to the \e[1mInspIRCd\e[0m configuration program! (\e[1minteractive mode\e[0m)
-\e[1mPackage maintainers: Type ./configure --help for non-interactive help\e[0m
-
-*** If you are unsure of any of these values, leave it blank for ***
-*** standard settings that will work, and your server will run ***
-*** using them. Please consult your IRC network admin if in doubt. ***
-
-Press \e[1m<RETURN>\e[0m to accept the default for any option, or enter
-a new value. Please note: You will \e[1mHAVE\e[0m to read the docs
-dir, otherwise you won't have a config file!
-
-Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
-Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
-STOP
- if ($rev eq "r0") {
- print " (Non-SVN build)";
- }
- print ".\n\n";
-
- $config{CHANGE_COMPILER} = "n";
- print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
-
- while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
- print "\e[1;32mIMPORTANT!\e[0m A GCC 2.x compiler has been detected, and
-should NOT be used. You should probably specify a newer compiler.\n\n";
- yesno('CHANGE_COMPILER',"Do you want to change the compiler?");
- if ($config{CHANGE_COMPILER} =~ /y/i) {
- print "What command do you want to use to invoke your compiler?\n";
- print "[\e[1;32m$config{CC}\e[0m] -> ";
- chomp($config{CC} = <STDIN>);
- if ($config{CC} eq "") {
- $config{CC} = "g++";
- }
- chomp(my $foo = `$config{CC} -dumpversion | cut -c 1`);
- if ($foo ne "") {
- chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
- chomp($config{GCCMINOR} = `$config{CC} -dumpversion | cut -c 3`);
- print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
- if ($config{GCCVER} < 3) {
- print "\e[1;32mGCC 2.x WILL NOT WORK!\e[0m. Let's try that again, shall we?\n";
- }
- }
- else {
- print "\e[1;32mWARNING!\e[0m Could not execute the compiler you specified. You may want to try again.\n";
- }
- }
- }
-
- print "\n";
-
- # Directory Settings..
- my $tmpbase = $config{BASE_DIR};
- dir_check("do you wish to install the InspIRCd base", "BASE_DIR");
- if ($tmpbase ne $config{BASE_DIR}) {
- $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Dir
- $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
- $config{DATA_DIR} = resolve_directory($config{BASE_DIR}."/data"); # Data Directory
- $config{LOG_DIR} = resolve_directory($config{BASE_DIR}."/logs"); # Log Directory
- $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
- }
-
- dir_check("are the configuration files", "CONFIG_DIR");
- dir_check("are the modules to be compiled to", "MODULE_DIR");
- dir_check("is the IRCd binary to be placed", "BINARY_DIR");
- dir_check("are variable data files to be located in", "DATA_DIR");
- dir_check("are the logs to be stored in", "LOG_DIR");
- dir_check("do you want the build to take place", "BUILD_DIR");
-
- my $chose_hiperf = 0;
- if ($has_kqueue) {
- yesno('USE_KQUEUE',"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
- print "\n";
- if ($config{USE_KQUEUE} eq "y") {
- $chose_hiperf = 1;
- }
- }
- if ($has_epoll) {
- yesno('USE_EPOLL',"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
- print "\n";
- if ($config{USE_EPOLL} eq "y") {
- $chose_hiperf = 1;
- }
- }
- if ($has_ports) {
- yesno('USE_PORTS',"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
- print "\n";
- if ($config{USE_PORTS} eq "y") {
- $chose_hiperf = 1;
- }
- }
-
- if (!$chose_hiperf) {
- yesno('USE_POLL', "Would you like to use poll?\n This is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?");
- if ($config{USE_POLL} ne "y")
- {
- print "No high-performance socket engines are available, or you chose\n";
- print "not to enable one. Defaulting to select() engine.\n\n";
- }
- }
-
- $config{USE_FREEBSD_BASE_SSL} = "n";
- $config{USE_FREEBSD_PORTS_SSL} = "n";
- if ($config{HAS_OPENSSL_PORT} ne "")
- {
- $config{USE_FREEBSD_PORTS_SSL} = "y";
- print "I have detected the OpenSSL FreeBSD port installed on your system,\n";
- print "version \e[1;32m".$config{HAS_OPENSSL_PORT}."\e[0m. Your base system OpenSSL is version \e[1;32m".$openssl_ver."\e[0m.\n\n";
- yesno('USE_FREEBSD_PORTS_SSL', "Do you want to use the FreeBSD ports version?");
- print "\n";
- $config{USE_FREEBSD_BASE_SSL} = "y" if ($config{USE_FREEBSD_PORTS_SSL} eq "n");
-
- if ($config{USE_FREEBSD_BASE_SSL} eq "n")
- {
- # update to port version
- $openssl_ver = $config{HAS_OPENSSL_PORT};
- }
- }
- else
- {
- $config{USE_FREEBSD_BASE_SSL} = "y" if ($^O eq "freebsd");
- }
-
- $config{USE_SSL} ||= "n";
- $config{MODUPDATE} ||= 'n';
-
- if ($config{HAS_GNUTLS} eq "y" || $config{HAS_OPENSSL} eq "y")
- {
- print "Detected GnuTLS version: \e[1;32m" . $gnutls_ver . "\e[0m\n";
- print "Detected OpenSSL version: \e[1;32m" . $openssl_ver . "\e[0m\n\n";
-
- yesno('USE_SSL', "One or more SSL libraries detected. Would you like to enable SSL support?");
- if ($config{USE_SSL} eq "y")
- {
- if ($config{HAS_GNUTLS} eq "y")
- {
- yesno('USE_GNUTLS',"Would you like to enable SSL with m_ssl_gnutls? (recommended)");
- if ($config{USE_GNUTLS} eq "y")
- {
- print "\nUsing GnuTLS SSL module.\n";
- }
- }
-
- if ($config{HAS_OPENSSL} eq "y")
- {
- yesno('USE_OPENSSL', "Would you like to enable SSL with m_ssl_openssl?");
- if ($config{USE_OPENSSL} eq "y")
- {
- print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
- }
- }
- }
- }
- else
- {
- print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed and\n";
- print "is in your path.\n\n";
- }
-
- yesno('MODUPDATE',"Would you like to check for updates to third-party modules?");
- print "\n";
- if ($config{MODUPDATE} eq "y") {
- print "Checking for upgrades to extra and third-party modules... ";
- system "./modulemanager upgrade";
- }
-}
-
-# We are on a POSIX system, we can enable POSIX extras without asking
-symlink "extra/m_regex_posix.cpp", "src/modules/m_regex_posix.cpp";
-
-dumphash();
-
-if (($config{USE_GNUTLS} eq "y") && ($config{HAS_GNUTLS} ne "y"))
-{
- print "Sorry, but I couldn't detect GnuTLS. Make sure pkg-config is in your path.\n";
- exit(0);
-}
-if (($config{USE_OPENSSL} eq "y") && ($config{HAS_OPENSSL} ne "y"))
-{
- print "Sorry, but I couldn't detect OpenSSL. Make sure pkg-config and openssl are in your path.\n";
- exit(0);
+ @group = $opt_system ? getgrnam('irc') : getgrgid($config{GID} // getgid());
+ print_error "you need to specify a group to run as using '--gid [id|name]'!" unless @group;
}
-our $failed = 0;
+$config{GROUP} = $group[0];
+$config{GID} = $group[2];
-$config{CERTGEN} ||= 'y';
-yesno('CERTGEN',"Would you like to generate SSL certificates now?") if ($interactive && ($config{USE_GNUTLS} eq "y" || $config{USE_OPENSSL} eq "y"));
-
-if ($config{USE_GNUTLS} eq "y") {
- unless (-r "src/modules/m_ssl_gnutls.cpp") {
- print "Symlinking src/modules/m_ssl_gnutls.cpp from extra/\n";
- symlink "extra/m_ssl_gnutls.cpp", "src/modules/m_ssl_gnutls.cpp" or print STDERR "Symlink failed: $!";
- }
- if ($interactive && $config{CERTGEN} eq 'y')
- {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL certificates not found, generating.. \n\n
-*************************************************************
-* Generating the private key may take some time, once done, *
-* answer the questions which follow. If you are unsure, *
-* just hit enter! *
-*************************************************************\n\n";
- $failed = make_gnutls_cert();
- if ($failed) {
- print "\n\e[1;32mCertificate generation failed!\e[0m\n\n";
- } else {
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- print "Done.\n\n";
- }
- }
- else {
- print "SSL certificates found, skipping.\n\n";
+# Parse --uid=123 or --uid=foo and extract the user id.
+my @user;
+if (defined $opt_uid) {
+ @user = $opt_uid =~ /^\d+$/ ? getpwuid($opt_uid) : getpwnam($opt_uid);
+ print_error "there is no '$opt_uid' user on this system!" unless @user;
+} else {
+ @user = $opt_system ? getpwnam('irc') : getpwuid($config{UID} // getuid());
+ print_error "you need to specify a user to run as using '--uid [id|name]'!" unless @user;
+}
+$config{USER} = $user[0];
+$config{UID} = $user[2];
+
+# Clear the screen.
+system 'tput', 'clear' if $interactive;
+
+# Warn the user about clock drifting when running on OpenVZ.
+if (-e '/proc/user_beancounters' || -e '/proc/vz/vzaquota') {
+ print_warning <<'EOW';
+You are building InspIRCd inside of an an OpenVZ container. If you
+plan to use InspIRCd in this container then you should make sure that NTP is
+configured on the Hardware Node. Failure to do so may result in clock drifting!
+EOW
+}
+
+# Check that the user actually wants this version.
+if ($version{LABEL} ne 'release') {
+ print_warning <<'EOW';
+You are building a development version. This contains code which has
+not been tested as heavily and may contain various faults which could seriously
+affect the running of your server. It is recommended that you use a stable
+version instead.
+
+You can obtain the latest stable version from http://www.inspircd.org/ or by
+running `git checkout insp20` if you are installing from Git.
+EOW
+ if (!prompt_bool $interactive, 'I understand this warning and want to continue anyway.', $opt_development // 0) {
+ say STDERR 'If you understand this warning and still want to continue pass the --development flag.' unless $interactive;
+ exit 1;
+ }
+}
+
+# Configure directory settings.
+my $question = <<"EOQ";
+Currently, InspIRCd is configured with the following paths:
+
+<|BOLD Base:|> $config{BASE_DIR}
+<|BOLD Binary:|> $config{BINARY_DIR}
+<|BOLD Config:|> $config{CONFIG_DIR}
+<|BOLD Data:|> $config{DATA_DIR}
+<|BOLD Log:|> $config{LOG_DIR}
+<|BOLD Manual:|> $config{MANUAL_DIR}
+<|BOLD Module:|> $config{MODULE_DIR}
+
+Do you want to change these settings?
+EOQ
+if (prompt_bool $interactive, $question, 0) {
+ my $original_base_dir = $config{BASE_DIR};
+ $config{BASE_DIR} = prompt_dir $interactive, 'In what directory do you wish to install the InspIRCd base?', $config{BASE_DIR};
+ foreach my $key (qw(BINARY_DIR CONFIG_DIR DATA_DIR LOG_DIR MANUAL_DIR MODULE_DIR)) {
+ $config{$key} =~ s/^\Q$original_base_dir\E/$config{BASE_DIR}/;
+ }
+ $config{BINARY_DIR} = prompt_dir $interactive, 'In what directory should the InspIRCd binary be placed?', $config{BINARY_DIR};
+ $config{CONFIG_DIR} = prompt_dir $interactive, 'In what directory are configuration files to be stored?', $config{CONFIG_DIR};
+ $config{DATA_DIR} = prompt_dir $interactive, 'In what directory are variable data files to be stored?', $config{DATA_DIR};
+ $config{LOG_DIR} = prompt_dir $interactive, 'In what directory are log files to be stored?', $config{LOG_DIR};
+ $config{MANUAL_DIR} = prompt_dir $interactive, 'In what directory are manual pages to be placed?', $config{MANUAL_DIR};
+ $config{MODULE_DIR} = prompt_dir $interactive, 'In what directory are modules to be placed?', $config{MODULE_DIR};
+}
+
+# Configure module settings.
+$question = <<'EOQ';
+Currently, InspIRCd is configured to automatically enable all available extra modules.
+
+Would you like to enable extra modules manually?
+EOQ
+if (prompt_bool $interactive, $question, 0) {
+ foreach my $extra (<src/modules/extra/m_*.cpp>) {
+ my $module_name = basename $extra, '.cpp';
+ if (prompt_bool $interactive, "Would you like to enable $module_name?", 0) {
+ enable_extras "$module_name.cpp";
}
}
- else
- {
- print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
- }
+} else {
+ # TODO: finish modulemanager rewrite and replace this code with:
+ # system './modulemanager', 'enable', '--auto';
+ enable_extras 'm_ssl_gnutls.cpp' unless system 'pkg-config --exists gnutls >/dev/null 2>&1';
+ enable_extras 'm_ssl_mbedtls.cpp' if -e '/usr/include/mbedtls/ssl.h';
+ enable_extras 'm_ssl_openssl.cpp' unless system 'pkg-config --exists openssl >/dev/null 2>&1';
}
-if ($config{USE_OPENSSL} eq "y") {
- unless (-r "src/modules/m_ssl_openssl.cpp") {
- print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
- symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!";
- }
- $failed = 0;
- if ($interactive && $config{CERTGEN} eq 'y')
- {
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL certificates not found, generating.. \n\n
-*************************************************************
-* Generating the certificates may take some time, go grab a *
-* coffee or something. *
-*************************************************************\n\n";
- make_openssl_cert();
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
- print "Done.\n\n";
- } else {
- print "SSL certificates found, skipping.\n\n"
- }
- }
- else
- {
- print "Skipping SSL certificate generation\nin non-interactive mode.\n\n";
- }
-}
-if (($config{USE_GNUTLS} eq "n") && ($config{USE_OPENSSL} eq "n")) {
- print "Skipping SSL certificate generation as SSL support is not available.\n\n";
+# Generate SSL certificates.
+if (<src/modules/m_ssl_*.cpp> && prompt_bool $interactive, 'Would you like to generate SSL certificates now?', $interactive) {
+ system './tools/genssl', 'auto';
}
-depcheck();
-writefiles(1);
-makecache();
+# Cache the distribution label so that its not lost when --update is run.
+$config{DISTRIBUTION} = $opt_distribution_label if $opt_distribution_label;
-print "\n\n";
-print "To build your server with these settings, please run '\e[1;32mmake\e[0m' now.\n";
-if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
- print "Please note: for \e[1;32mSSL support\e[0m you will need to load required\n";
- print "modules in your config. This configure script has added those modules to the\n";
- print "build process. For more info, please refer to:\n";
- print "\e[1;32mhttp://wiki.inspircd.org/Installation_From_Tarball\e[0m\n";
-}
-print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n\n";
-if (($config{OSNAME} eq "OpenBSD") && ($config{CC} ne "eg++")) {
- print "\e[1;32mWARNING!\e[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but I'm letting you\ngo ahead with it anyway, just in case I'm wrong :-)\n";
-}
+write_configure_cache %config;
+parse_templates \%config, \%compiler, \%version;
-if ($config{GCCVER} < "3") {
- print <<FOO2;
-\e[1;32mWARNING!\e[0m You are attempting to compile InspIRCd on GCC 2.x!
-GCC 2.x series compilers only had partial (read as broken) C++ support, and
-your compile will most likely fail horribly! If you have any problems, do NOT
-report them to the bugtracker or forums without first upgrading your compiler
-to a newer 3.x or 4.x (or whatever is available currently) version.
-FOO2
-}
+print_format <<"EOM";
-################################################################################
-# HELPER FUNCTIONS #
-################################################################################
-sub getcache {
- # Retrieves the .config.cache file, and loads values into the main config hash.
- open(CACHE, ".config.cache") or return 0;
- while (<CACHE>) {
- chomp;
- # Ignore Blank lines, and comments..
- next if /^\s*$/;
- next if /^\s*#/;
- my ($key, $value) = split("=", $_, 2);
- $value =~ /^\"(.*)\"$/;
- # Do something with data here!
- $config{$key} = $1;
- }
- close(CACHE);
- return 1;
-}
+Configuration is complete! You have chosen to build with the following settings:
-sub makecache {
- # Dump the contents of %config
- print "Writing \e[1;32mcache file\e[0m for future ./configures ...\n";
- open(FILEHANDLE, ">.config.cache");
- foreach my $key (keys %config) {
- print FILEHANDLE "$key=\"$config{$key}\"\n";
- }
- close(FILEHANDLE);
-}
+<|GREEN Compiler:|>
+ <|GREEN Binary:|> $config{CXX}
+ <|GREEN Name:|> $compiler{NAME}
+ <|GREEN Version:|> $compiler{VERSION}
-sub dir_check {
- my ($desc, $hash_key) = @_;
- my $complete = 0;
- while (!$complete) {
- print "In what directory $desc?\n";
- print "[\e[1;32m$config{$hash_key}\e[0m] -> ";
- chomp(my $var = <STDIN>);
- if ($var eq "") {
- $var = $config{$hash_key};
- }
- if ($var =~ /^\~\/(.+)$/) {
- # Convert it to a full path..
- $var = resolve_directory($ENV{HOME} . "/" . $1);
- }
- elsif ((($config{OSNAME} =~ /MINGW32/i) and ($var !~ /^[A-Z]{1}:\\.*/)) and (substr($var,0,1) ne "/"))
- {
- # Assume relative Path was given.. fill in the rest.
- $var = $this . "/$var";
- }
+<|GREEN Extra Modules:|>
+EOM
- $var = resolve_directory($var);
- if (! -e $var) {
- print "$var does not exist. Create it?\n[\e[1;32my\e[0m] ";
- chomp(my $tmp = <STDIN>);
- if (($tmp eq "") || ($tmp =~ /^y/i)) {
- # Attempt to Create the Dir..
- my $chk = eval {
- use File::Path ();
- File::Path::mkpath($var, 0, 0777);
- 1;
- };
- unless (defined($chk) && -d $var) {
- print "Unable to create directory. ($var)\n\n";
- # Restart Loop..
- next;
- }
- } else {
- # They said they don't want to create, and we can't install there.
- print "\n\n";
- next;
- }
- } else {
- if (!is_dir($var)) {
- # Target exists, but is not a directory.
- print "File $var exists, but is not a directory.\n\n";
- next;
- }
- }
- # Either Dir Exists, or was created fine.
- $config{$hash_key} = $var;
- $complete = 1;
- print "\n";
- }
+for my $file (<src/modules/m_*>) {
+ my $module = basename $file, '.cpp';
+ say " * $module" if -l $file;
}
-our $SHARED = "";
-
-my ($mliflags, $mfrules, $mobjs, $mfcount) = ("", "", "", 0);
-
-sub writefiles {
- my($writeheader) = @_;
- # First File.. inspircd_config.h
- chomp(my $incos = `uname -n -s -r`);
- chomp(my $version = `sh src/version.sh`);
- chomp(my $revision2 = getrevision());
- my $branch = "InspIRCd-0.0";
- if ($version =~ /^(InspIRCd-[0-9]+\.[0-9]+)\.[0-9]+/)
- {
- $branch = $1;
- }
- if ($writeheader == 1)
- {
- print "Writing \e[1;32minspircd_config.h\e[0m\n";
- open(FILEHANDLE, ">include/inspircd_config.h.tmp");
- print FILEHANDLE <<EOF;
-/* Auto generated by configure, do not modify! */
-#ifndef __CONFIGURATION_AUTO__
-#define __CONFIGURATION_AUTO__
-
-/* this is for windows support. */
-#define CoreExport /**/
-#define DllExport /**/
-
-#define CONFIG_PATH "$config{CONFIG_DIR}"
-#define DATA_PATH "$config{DATA_DIR}"
-#define LOG_PATH "$config{LOG_DIR}"
-#define MOD_PATH "$config{MODULE_DIR}"
-#define SOMAXCONN_S "$config{_SOMAXCONN}"
-#define ENTRYPOINT int main(int argc, char** argv)
-
-EOF
-print FILEHANDLE "#define MAXBUF " . ($config{MAXBUF}+2) . "\n";
-
- if ($config{OSNAME} =~ /SunOS/i) {
- print FILEHANDLE "#define IS_SOLARIS\n";
- }
- if ($config{OSNAME} =~ /MINGW32/i) {
- print FILEHANDLE "#define IS_MINGW\n";
- }
- if ($config{GCCVER} >= 3) {
- print FILEHANDLE "#define GCC3\n";
- }
- if ($config{HAS_STRLCPY} eq "true") {
- print FILEHANDLE "#define HAS_STRLCPY\n";
- }
- if ($config{HAS_STDINT} eq "true") {
- print FILEHANDLE "#define HAS_STDINT\n";
- }
- if ($config{HAS_EVENTFD} eq 'true') {
- print FILEHANDLE "#define HAS_EVENTFD\n";
- }
- if ($config{OSNAME} !~ /DARWIN/i) {
- print FILEHANDLE "#define HAS_CLOCK_GETTIME\n";
- }
- my $use_hiperf = 0;
- if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
- print FILEHANDLE "#define USE_KQUEUE\n";
- $config{SOCKETENGINE} = "socketengine_kqueue";
- $use_hiperf = 1;
- }
- if (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
- print FILEHANDLE "#define USE_EPOLL\n";
- $config{SOCKETENGINE} = "socketengine_epoll";
- $use_hiperf = 1;
- }
- if (($has_ports) && ($config{USE_PORTS} eq "y")) {
- print FILEHANDLE "#define USE_PORTS\n";
- $config{SOCKETENGINE} = "socketengine_ports";
- $use_hiperf = 1;
- }
- # user didn't choose either epoll or select for their OS.
- # default them to USE_SELECT (ewwy puke puke)
- if (!$use_hiperf) {
- print "no hi-perf, " . $config{USE_POLL};
- if ($config{USE_POLL} eq "y")
- {
- print FILEHANDLE "#define USE_POLL\n";
- $config{SOCKETENGINE} = "socketengine_poll";
- }
- else
- {
- print FILEHANDLE "#define USE_SELECT\n";
- $config{SOCKETENGINE} = "socketengine_select";
- }
- }
- print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n\n#endif\n";
- close(FILEHANDLE);
-
- open(FILEHANDLE, ">include/inspircd_version.h.tmp");
- print FILEHANDLE <<EOF;
-#define BRANCH "$branch"
-#define VERSION "$version"
-#define REVISION "$revision2"
-#define SYSTEM "$incos"
-EOF
- close FILEHANDLE;
-
- for my $file (qw(include/inspircd_config.h include/inspircd_version.h)) {
- my $diff = 0;
- open my $fh1, $file or $diff = 1;
- open my $fh2, $file.'.tmp' or die "Can't read $file.tmp that we just wrote: $!";
- while (!$diff) {
- my $line1 = <$fh1>;
- my $line2 = <$fh2>;
- if (defined($line1) != defined($line2)) {
- $diff = 1;
- } elsif (!defined $line1) {
- last;
- } else {
- $diff = ($line1 ne $line2);
- }
- }
- if ($diff) {
- unlink $file;
- rename "$file.tmp", $file;
- } else {
- unlink "$file.tmp";
- }
- }
- }
-
- # Write all .in files.
- my $tmp = "";
- my $file = "";
- my $exe = "inspircd";
-
- # Do this once here, and cache it in the .*.inc files,
- # rather than attempting to read src/version.sh from
- # compiled code -- we might not have the source to hand.
- # Fix for bug#177 by Brain.
-
- chomp($version = `sh ./src/version.sh`);
- chomp(my $revision = getrevision());
- $version = "$version(r$revision)";
-
- # We can actually parse any file starting with . and ending with .inc,
- # but right now we only parse .inspircd.inc to form './inspircd'
- prepare_dynamic_makefile();
-
- my @dotfiles = qw(main.mk inspircd);
- push @dotfiles, 'org.inspircd.plist' if $config{OSNAME} eq 'darwin';
-
- foreach my $file (@dotfiles) {
- open(FILEHANDLE, "make/template/$file") or die "Can't open make/template/$file: $!";
- $_ = join '', <FILEHANDLE>;
- close(FILEHANDLE);
-
- $config{BUILD_DIR} ||= resolve_directory($config{ME}."/build");
-
- for my $var (qw(
- CC SYSTEM BASE_DIR CONFIG_DIR MODULE_DIR BINARY_DIR BUILD_DIR DATA_DIR UID
- STARTSCRIPT DESTINATION SOCKETENGINE LOG_DIR
- )) {
- s/\@$var\@/$config{$var}/g;
- }
- s/\@EXECUTABLE\@/$exe/ if defined $exe;
- s/\@VERSION\@/$version/ if defined $version;
-
- if ($file eq 'main.mk') {
- print "Writing \e[1;32mGNUmakefile\e[0m ...\n";
+print_format <<"EOM";
- my $mk_tmp = $_;
- s/\@IFDEF (\S+)/ifdef $1/g;
- s/\@IFNDEF (\S+)/ifndef $1/g;
- s/\@IFEQ (\S+) (\S+)/ifeq ($1,$2)/g;
- s/\@ELSIFEQ (\S+) (\S+)/else ifeq ($1,$2)/g;
- s/\@ELSE/else/g;
- s/\@ENDIF/endif/g;
- s/ *\@BSD_ONLY .*\n//g;
- s/\@GNU_ONLY //g;
- s/\@DO_EXPORT (.*)/export $1/g;
- open MKF, '>GNUmakefile' or die "Can't write to GNUmakefile: $!";
- print MKF $_;
- close MKF;
+<|GREEN Paths:|>
+ <|GREEN Base:|> $config{BASE_DIR}
+ <|GREEN Binary:|> $config{BINARY_DIR}
+ <|GREEN Config:|> $config{CONFIG_DIR}
+ <|GREEN Data:|> $config{DATA_DIR}
+ <|GREEN Log:|> $config{LOG_DIR}
+ <|GREEN Manual:|> $config{MANUAL_DIR}
+ <|GREEN Module:|> $config{MODULE_DIR}
- print "Writing \e[1;32mBSDmakefile\e[0m ...\n";
- $_ = $mk_tmp;
- s/\@IFDEF (\S+)/.if defined($1)/g;
- s/\@IFNDEF (\S+)/.if !defined($1)/g;
- s/\@IFEQ (\S+) (\S+)/.if $1 == $2/g;
- s/\@ELSIFEQ (\S+) (\S+)/.elif $1 == $2/g;
- s/\@ELSE/.else/g;
- s/\@ENDIF/.endif/g;
- s/\@BSD_ONLY //g;
- s/ *\@GNU_ONLY .*\n//g;
- $mk_tmp = $_;
- $mk_tmp =~ s#\@DO_EXPORT (.*)#"MAKEENV += ".join ' ', map "$_='\${$_}'", split /\s/, $1#eg;
- open MKF, '>BSDmakefile' or die "Can't write to BSDmakefile: $!";
- print MKF $mk_tmp;
- close MKF;
- } else {
- print "Writing \e[1;32m$file\e[0m ...\n";
- open(FILEHANDLE, ">$file") or die("Can't write to $file: $!\n");
- print FILEHANDLE $_;
- close(FILEHANDLE);
- }
- }
-
- chmod 0755, 'inspircd';
-}
-
-sub depcheck
-{
- getmodules();
- for my $mod (@modlist) {
- getcompilerflags("src/modules/m_$mod.cpp");
- getlinkerflags("src/modules/m_$mod.cpp");
- }
-}
+<|GREEN Execution Group:|> $config{GROUP} ($config{GID})
+<|GREEN Execution User:|> $config{USER} ($config{UID})
+<|GREEN Socket Engine:|> $config{SOCKETENGINE}
-sub prepare_dynamic_makefile
-{
- my $i = 0;
+To build with these settings run '<|GREEN make -j${\get_cpu_count}|>' now.
- if (!$has_epoll)
- {
- $config{USE_EPOLL} = 0;
- }
- if (!$has_kqueue)
- {
- $config{USE_KQUEUE} = 0;
- }
- if (!$has_ports)
- {
- $config{USE_PORTS} = 0;
- }
-}
+EOM
# Routine to list out the extra/ modules that have been enabled.
# Note: when getting any filenames out and comparing, it's important to lc it if the
for my $extra (keys(%extras)) {
next unless $extras{$extra} =~ m/enabled/; # only process enabled extras.
my $abs_extra = File::Spec->catfile($abs_srcdir, "extra", $extra);
- my @deps = split / +/, getdependencies($abs_extra);
+ my @deps = split /\s+/, get_directive($abs_extra, 'ModDep', '');
for my $dep (@deps) {
if (exists($extras{$dep})) {
my $ref = \$extras{$dep}; # Take reference.
next;
}
# Get dependencies, and add them to be processed.
- my @deps = split / +/, getdependencies($extrapath);
+ my @deps = split /\s+/, get_directive($extrapath, 'ModDep', '');
for my $dep (@deps) {
next if scalar(grep { $_ eq $dep } (@extras)) > 0; # Skip if we're going to be enabling it anyway.
- if (!-e "src/modules/$dep") {
+ if (!-e "src/modules/$dep" && !-e "include/$dep") {
if (-e "src/modules/extra/$dep") {
print STDERR "Will also enable extra \e[32;1m$dep\e[0m (needed by \e[32;1m$extra\e[0m)\n";
push @extras, $dep;
}
# Check if anything needs this.
for my $file (@files) {
- my @deps = split / +/, getdependencies("src/modules/extra/$file");
+ my @deps = split /\s+/, get_directive("src/modules/extra/$file", 'ModDep', '');
# File depends on this extra...
if (scalar(grep { $_ eq $extra } @deps) > 0) {
# And is both enabled and not about to be disabled.
projects / user / henk / code / inspircd.git / blobdiff