use strict;
use warnings FATAL => qw(all);
-use Data::Dumper;
-BEGIN {
- $Data::Dumper::Sortkeys = 1;
- $Data::Dumper::Useqq = 1;
-};
-
use File::Copy ();
+use File::Spec::Functions qw(rel2abs);
use Cwd;
use Getopt::Long;
-# Utility functions for our buildsystem
-use make::utilities;
use make::configure;
+use make::utilities;
-###############################################################################################
-#
-# NON-EDITABLE VARIABLES
-#
-###############################################################################################
-
-our ($opt_use_gnutls, $opt_use_openssl, $opt_nointeractive, $opt_ports, $opt_epoll, $opt_kqueue,
- $opt_noports, $opt_noepoll, $opt_nokqueue, $opt_maxbuf, $opt_freebsd_port, $opt_system, $opt_uid);
-
-our ($opt_cc, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir, $opt_data_dir, $opt_log_dir);
+our ($opt_use_gnutls, $opt_use_openssl, $opt_nointeractive, $opt_socketengine, $opt_freebsd_port,
+ $opt_system, $opt_uid, $opt_base_dir, $opt_config_dir, $opt_module_dir, $opt_binary_dir,
+ $opt_data_dir, $opt_log_dir);
sub list_extras ();
'uid=s' => \$opt_uid,
'enable-openssl' => \$opt_use_openssl,
'disable-interactive' => \$opt_nointeractive,
- 'enable-ports' => \$opt_ports,
- 'enable-epoll' => \$opt_epoll,
- 'enable-kqueue' => \$opt_kqueue,
- 'disable-ports' => \$opt_noports,
- 'disable-epoll' => \$opt_noepoll,
- 'disable-kqueue' => \$opt_nokqueue,
- 'with-cc=s' => \$opt_cc,
- 'with-maxbuf=i' => \$opt_maxbuf,
+ 'socketengine=s' => \$opt_socketengine,
'enable-freebsd-ports-openssl' => \$opt_freebsd_port,
'prefix=s' => \$opt_base_dir,
'config-dir=s' => \$opt_config_dir,
(defined $opt_data_dir) ||
(defined $opt_log_dir) ||
(defined $opt_nointeractive) ||
- (defined $opt_cc) ||
- (defined $opt_kqueue) ||
- (defined $opt_epoll) ||
- (defined $opt_ports) ||
+ (defined $opt_socketengine) ||
(defined $opt_use_openssl) ||
- (defined $opt_nokqueue) ||
- (defined $opt_noepoll) ||
- (defined $opt_noports) ||
- (defined $opt_maxbuf) ||
(defined $opt_system) ||
(defined $opt_uid) ||
(defined $opt_use_gnutls) ||
(defined $opt_freebsd_port)
);
-chomp(our $topdir = getcwd());
-our $this = resolve_directory($topdir); # PWD, Regardless.
-our @modlist = (); # Declare for Module List..
-our %config = (); # Initiate Configuration Hash..
+our $topdir = getcwd();
+our @modlist = ();
+our %config = ();
our $cache_loaded = getcache();
-$config{ME} = resolve_directory($topdir); # Present Working Directory
-$config{BASE_DIR} = $config{ME}."/run";
+$config{BASE_DIR} = $topdir."/run";
if (defined $opt_base_dir) {
$config{BASE_DIR} = $opt_base_dir;
if (defined $opt_system) {
$config{UID} = $opt_uid || 'ircd';
- $config{CONFIG_DIR} = '/etc/inspircd';
- $config{MODULE_DIR} = '/usr/lib/inspircd';
- $config{BINARY_DIR} = '/usr/sbin/';
- $config{BUILD_DIR} = resolve_directory($config{ME}."/build"); # Build Directory
- $config{DATA_DIR} = '/var/inspircd';
- $config{LOG_DIR} = '/var/log/inspircd';
+ $config{CONFIG_DIR} = '/etc/inspircd';
+ $config{MODULE_DIR} = '/usr/lib/inspircd';
+ $config{BINARY_DIR} = '/usr/sbin/';
+ $config{BUILD_DIR} = $topdir."/build";
+ $config{DATA_DIR} = '/var/inspircd';
+ $config{LOG_DIR} = '/var/log/inspircd';
} else {
$config{UID} = $opt_uid || $<;
- $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Directory
- $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
- $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
- $config{BUILD_DIR} = resolve_directory($config{ME}."/build"); # Build Directory
- $config{DATA_DIR} = resolve_directory($config{BASE_DIR}."/data"); # Data directory
- $config{LOG_DIR} = resolve_directory($config{BASE_DIR}."/logs"); # Log directory
+ $config{CONFIG_DIR} = rel2abs($config{BASE_DIR}."/conf");
+ $config{MODULE_DIR} = rel2abs($config{BASE_DIR}."/modules");
+ $config{BINARY_DIR} = rel2abs($config{BASE_DIR}."/bin");
+ $config{BUILD_DIR} = rel2abs($topdir."/build");
+ $config{DATA_DIR} = rel2abs($config{BASE_DIR}."/data");
+ $config{LOG_DIR} = rel2abs($config{BASE_DIR}."/logs");
}
if (defined $opt_config_dir) {
$config{USE_OPENSSL} = "y";
}
-$config{HAS_STDINT} = "false"; # stdint.h check
-$config{USE_KQUEUE} = "y"; # kqueue enabled
-if (defined $opt_nokqueue) {
- $config{USE_KQUEUE} = "n";
-}
-$config{USE_POLL} = "y"; # poll enabled
-$config{USE_EPOLL} = "y"; # epoll enabled
-if (defined $opt_noepoll)
-{
- $config{USE_EPOLL} = "n";
-}
-$config{USE_PORTS} = "y"; # epoll enabled
-if (defined $opt_noports)
-{
- $config{USE_PORTS} = "n";
-}
-$config{OSNAME} = $^O; # Operating System Name
-$config{STARTSCRIPT} = "inspircd"; # start script?
-$config{DESTINATION} = "BASE"; # Is target path.
-if ($config{OSNAME} =~ /darwin/i)
-{
- $config{STARTSCRIPT} = "org.inspircd.plist"; # start script for OSX.
- $config{CC} = "xcrun clang++"; # C++ compiler for OSX.
-}
-else
-{
- $config{CC} = "g++"; # C++ compiler
+$config{STARTSCRIPT} = $^O eq 'darwin' ? 'org.inspircd.plist' : 'inspircd';
+
+$config{CXX} = defined $ENV{CXX} && !system("$ENV{CXX} -v > /dev/null 2>&1") ? $ENV{CXX} : find_compiler();
+if ($config{CXX} eq "") {
+ print "A C++ compiler could not be detected on your system!\n";
+ print "Set the CXX environment variable to the full path if this is incorrect.\n";
+ exit 1;
}
-if (defined $opt_cc)
-{
- $config{CC} = $opt_cc;
+
+our %cxx = get_compiler_info($config{CXX});
+if ($cxx{UNSUPPORTED}) {
+ print "Your C++ compiler is too old to build InspIRCd!\n";
+ print "Reason: $cxx{REASON}\n";
+ exit 1;
}
-our $exec = $config{CC} . " -dumpversion | cut -c 1";
-chomp($config{GCCVER} = `$exec`); # Major GCC Version
-$exec = $config{CC} . " -dumpversion | cut -c 3";
-chomp($config{GCCMINOR} = `$exec`);
-$config{MAXBUF} = "512"; # Max buffer size
if ($config{HAS_OPENSSL} =~ /^([-[:digit:].]+)(?:[a-z])?(?:\-[a-z][0-9])?/) {
$config{HAS_OPENSSL} = $1;
$config{HAS_OPENSSL} = "";
}
-if (($config{GCCVER} eq "") || ($config{GCCMINOR} eq "")) {
- if ($config{OSNAME} eq 'darwin') {
- print $config{CC} . " was not found! You require clang++ (the LLVM C++ compiler, part of the OSX developer tools) to build InspIRCd!\n";
- } else {
- print $config{CC} . " was not found! You require g++ (the GNU C++ compiler, part of GCC) to build InspIRCd!\n";
- }
- exit;
-}
-
# Get and Set some important vars..
getmodules();
unlink(".config.cache");
}
-our ($has_epoll, $has_ports, $has_kqueue) = (0, 0, 0);
-
sub update
{
eval {
- chomp($topdir = getcwd());
- $this = resolve_directory($topdir); # PWD, Regardless.
- getmodules();
# Does the cache file exist?
if (!getcache()) {
# No, No it doesn't.. *BASH*
print "You have not run ./configure before. Please do this before trying to run the update script.\n";
- exit 0;
+ exit 1;
} else {
# We've Loaded the cache file and all our variables..
+ $topdir = getcwd();
+ getmodules();
print "Updating files...\n";
- $has_epoll = $config{HAS_EPOLL};
- $has_ports = $config{HAS_PORTS};
- $has_kqueue = $config{HAS_KQUEUE};
- writefiles(1);
+ %cxx = get_compiler_info($config{CXX});
+ writefiles();
makecache();
print "Complete.\n";
exit;
print "Running non-interactive configure...\n" unless $interactive;
print "Checking for cache from previous configure... ";
print ($cache_loaded ? "found\n" : "not found\n");
-$config{SYSTEM} = lc $^O;
-print "Checking operating system version... $config{SYSTEM}\n";
-$exec = $config{CC} . " -dumpversion | cut -c 1";
-chomp($config{GCCVER} = `$exec`); # Major GCC Version
-$exec = $config{CC} . " -dumpversion | cut -c 3";
-chomp($config{GCCMINOR} = `$exec`);
+$config{HAS_CLOCK_GETTIME} = run_test 'clock_gettime()', test_file($config{CXX}, 'clock_gettime.cpp', '-lrt');
+$config{HAS_EVENTFD} = run_test 'eventfd()', test_file($config{CXX}, 'eventfd.cpp');
-
-print "Checking whether <stdint.h> exists... ";
-if (test_header($config{CC}, "stdint.h")) {
- $config{HAS_STDINT} = "true";
- print "yes\n";
-} else {
- $config{HAS_STDINT} = "false";
- print "no\n";
+if ($config{HAS_EPOLL} = run_test 'epoll', test_header($config{CXX}, 'sys/epoll.h')) {
+ $config{SOCKETENGINE} ||= 'epoll';
}
-printf "Checking whether clock_gettime() exists... ";
-if (test_file($config{CC}, "clock_gettime.cpp", "-lrt")) {
- $config{HAS_CLOCK_GETTIME} = "true";
- print "yes\n";
-} else {
- $config{HAS_CLOCK_GETTIME} = "false";
- print "no\n";
+if ($config{HAS_KQUEUE} = run_test 'kqueue', test_file($config{CXX}, 'kqueue.cpp')) {
+ $config{SOCKETENGINE} ||= 'kqueue';
}
-printf "Checking whether eventfd() exists... ";
-if (test_file($config{CC}, "eventfd.cpp")) {
- $config{HAS_EVENTFD} = "true";
- print "yes\n";
-} else {
- $config{HAS_EVENTFD} = "false";
- print "no\n";
+if ($config{HAS_PORTS} = run_test 'Solaris IOCP', test_header($config{CXX}, 'port.h')) {
+ $config{SOCKETENGINE} ||= 'ports';
}
-printf "Checking if a TCP deferring mechanism is available... ";
-if (test_file($config{CC}, "tcp_defer_accept.cpp")) {
- $config{HAS_DEFER} = "TCP_DEFER_ACCEPT";
- print "yes (TCP_DEFER_ACCEPT)\n";
-} elsif (test_file($config{CC}, "so_acceptfilter.cpp")) {
- $config{HAS_DEFER} = "SO_ACCEPTFILTER";
- print "yes (SO_ACCEPTFILTER)\n";
-} else {
- $config{HAS_DEFER} = "false";
- print "no\n";
+if ($config{HAS_POLL} = run_test 'poll', test_header($config{CXX}, 'poll.h')) {
+ $config{SOCKETENGINE} ||= 'poll';
}
-print "Checking whether epoll is available... ";
-$has_epoll = test_header($config{CC}, "sys/epoll.h");
-print $has_epoll ? "yes\n" : "no\n";
-
-print "Checking whether Kqueue is available... ";
-$has_kqueue = test_file($config{CC}, "kqueue.cpp");
-print $has_kqueue ? "yes\n" : "no\n";
+# Select is available on all platforms
+$config{HAS_SELECT} = 1;
+$config{SOCKETENGINE} ||= "select";
-print 'Checking whether Solaris IOCP is available... ';
-$has_ports = test_header($config{CC}, 'port.h');
-print $has_ports ? "yes\n" : "no\n";
-
-$config{HAS_EPOLL} = $has_epoll;
-$config{HAS_KQUEUE} = $has_kqueue;
+if (defined $opt_socketengine) {
+ my $cfgkey = "HAS_" . uc $opt_socketengine;
+ if ($config{$cfgkey} && -f "src/socketengines/socketengine_$opt_socketengine.cpp") {
+ $config{SOCKETENGINE} = $opt_socketengine;
+ } else {
+ print "Unable to use a socket engine which is not supported on this platform ($opt_socketengine)!\n";
+ print "Available socket engines are:";
+ foreach (<src/socketengines/socketengine_*.cpp>) {
+ s/src\/socketengines\/socketengine_(\w+)\.cpp/$1/;
+ print " $1" if $config{"HAS_" . uc $1};
+ }
+ print "\n";
+ exit 1;
+ }
+}
-printf "Checking for libgnutls... ";
+print "Checking for libgnutls... ";
if (defined($config{HAS_GNUTLS}) && (($config{HAS_GNUTLS}) || ($config{HAS_GNUTLS} eq "y"))) {
if (defined($gnutls_ver) && ($gnutls_ver ne "")) {
print "yes\n";
$config{HAS_GNUTLS} = "n";
}
-printf "Checking for openssl... ";
+print "Checking for openssl... ";
if (defined($config{HAS_OPENSSL}) && (($config{HAS_OPENSSL}) || ($config{HAS_OPENSSL} eq "y"))) {
if (defined($openssl_ver) && ($openssl_ver ne "")) {
print "yes\n";
$config{HAS_OPENSSL} = "n";
}
-printf "Checking if you are running an ancient, unsupported OS... ";
-if ($config{OSNAME} =~ /FreeBSD/i)
-{
- my $version = `uname -r`;
- if ($version =~ /^4\./)
- {
- print "yes.\n";
- print "FreeBSD 4.x is no longer supported. By ANYONE.\n";
- print "To build, you will need to add the following to CXXFLAGS:\n";
- print "\t-L/usr/local/lib -lgnugetopt -DHAVE_DECL_GETOPT=1\n";
- }
- else
- {
- print "no ($version)\n";
- }
-}
-else
-{
- print "no ($config{OSNAME})\n";
-}
-
-################################################################################
-# BEGIN INTERACTIVE PART #
-################################################################################
-
-# Clear the Screen..
if ($interactive)
{
- print "\e[2J\e[0G\e[0d"; # J = Erase in Display, 2 = Entire Screen, (G, d) = Move cursor to (..,..)
- my $wholeos = $^O;
+ # Clear the screen.
+ system 'tput', 'clear';
+
+ my $revision = getrevision();
+ chomp(my $version = `sh src/version.sh`);
- my $rev = getrevision();
# Display Introduction Message..
print <<"STOP" ;
Welcome to the \e[1mInspIRCd\e[0m Configuration program! (\e[1minteractive mode\e[0m)
a new value. Please note: You will \e[1mHAVE\e[0m to read the docs
dir, otherwise you won't have a config file!
-Your operating system is: \e[1;32m$config{OSNAME}\e[0m ($wholeos)
-Your InspIRCd revision ID is \e[1;32mr$rev\e[0m
+Your operating system is: \e[1;32m$^O\e[0m
STOP
- if ($rev eq "r0") {
- print " (Non-SVN build)";
- }
- print ".\n\n";
-
- $config{CHANGE_COMPILER} = "n";
- print "I have detected the following compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
-
- while (($config{GCCVER} < 3) || ($config{GCCVER} eq "")) {
- print "\e[1;32mIMPORTANT!\e[0m A GCC 2.x compiler has been detected, and
-should NOT be used. You should probably specify a newer compiler.\n\n";
- yesno('CHANGE_COMPILER',"Do you want to change the compiler?");
- if ($config{CHANGE_COMPILER} =~ /y/i) {
- print "What command do you want to use to invoke your compiler?\n";
- print "[\e[1;32m$config{CC}\e[0m] -> ";
- chomp($config{CC} = <STDIN>);
- if ($config{CC} eq "") {
- $config{CC} = "g++";
- }
- chomp(my $foo = `$config{CC} -dumpversion | cut -c 1`);
- if ($foo ne "") {
- chomp($config{GCCVER} = `$config{CC} -dumpversion | cut -c 1`); # we must redo these if we change compilers
- chomp($config{GCCMINOR} = `$config{CC} -dumpversion | cut -c 3`);
- print "Queried compiler: \e[1;32m$config{CC}\e[0m (version \e[1;32m$config{GCCVER}.$config{GCCMINOR}\e[0m)\n";
- if ($config{GCCVER} < 4 || $config{GCCVER} == 4 && $config{GCCMINOR} < 1) {
- print "\e[1;32mGCC 4.1 and earlier WILL NOT WORK!\e[0m. Let's try that again, shall we?\n";
- }
- }
- else {
- print "\e[1;32mWARNING!\e[0m Could not execute the compiler you specified. You may want to try again.\n";
- }
- }
- }
-
- print "\n";
+ print "Your InspIRCd version is: \e[1;32m";
+ print $revision eq 'release' ? substr($version, 9) : substr($revision, 1);
+ print "\e[0m\n\n";
+ print "The following compiler has been detected: \e[1;32m$cxx{NAME} $cxx{VERSION}\e[0m ($config{CXX})\n\n";
# Directory Settings..
my $tmpbase = $config{BASE_DIR};
dir_check("do you wish to install the InspIRCd base", "BASE_DIR");
if ($tmpbase ne $config{BASE_DIR}) {
- $config{CONFIG_DIR} = resolve_directory($config{BASE_DIR}."/conf"); # Configuration Dir
- $config{MODULE_DIR} = resolve_directory($config{BASE_DIR}."/modules"); # Modules Directory
- $config{DATA_DIR} = resolve_directory($config{BASE_DIR}."/data"); # Data Directory
- $config{LOG_DIR} = resolve_directory($config{BASE_DIR}."/logs"); # Log Directory
- $config{BINARY_DIR} = resolve_directory($config{BASE_DIR}."/bin"); # Binary Directory
+ $config{CONFIG_DIR} = rel2abs($config{BASE_DIR}."/conf");
+ $config{MODULE_DIR} = rel2abs($config{BASE_DIR}."/modules");
+ $config{DATA_DIR} = rel2abs($config{BASE_DIR}."/data");
+ $config{LOG_DIR} = rel2abs($config{BASE_DIR}."/logs");
+ $config{BINARY_DIR} = rel2abs($config{BASE_DIR}."/bin");
}
dir_check("are the configuration files", "CONFIG_DIR");
dir_check("do you want the build to take place", "BUILD_DIR");
my $chose_hiperf = 0;
- if ($has_kqueue) {
+ if ($config{HAS_KQUEUE}) {
+ $config{USE_KQUEUE} = "y";
yesno('USE_KQUEUE',"You are running a BSD operating system, and kqueue\nwas detected. Would you like to enable kqueue support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable kqueue?");
print "\n";
if ($config{USE_KQUEUE} eq "y") {
+ $config{SOCKETENGINE} = "kqueue";
$chose_hiperf = 1;
}
}
- if ($has_epoll) {
+ if ($config{HAS_EPOLL}) {
+ $config{USE_EPOLL} = "y";
yesno('USE_EPOLL',"You are running a Linux 2.6+ operating system, and epoll\nwas detected. Would you like to enable epoll support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable epoll?");
print "\n";
if ($config{USE_EPOLL} eq "y") {
+ $config{SOCKETENGINE} = "epoll";
$chose_hiperf = 1;
}
}
- if ($has_ports) {
+ if ($config{HAS_PORTS}) {
+ $config{USE_PORTS} = "y";
yesno('USE_PORTS',"You are running Solaris 10.\nWould you like to enable I/O completion ports support?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable support for I/O completion ports?");
print "\n";
if ($config{USE_PORTS} eq "y") {
+ $config{SOCKETENGINE} = "ports";
$chose_hiperf = 1;
}
}
- if (!$chose_hiperf) {
- yesno('USE_POLL', "Would you like to use poll?\n This is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?");
- if ($config{USE_POLL} ne "y")
- {
- print "No high-performance socket engines are available, or you chose\n";
- print "not to enable one. Defaulting to select() engine.\n\n";
+ if (!$chose_hiperf && $config{HAS_POLL}) {
+ $config{USE_POLL} = "y";
+ yesno('USE_POLL', "Would you like to use poll?\nThis is likely to increase performance.\nIf you are unsure, answer yes.\n\nEnable poll?");
+ if ($config{USE_POLL} eq "y") {
+ $config{SOCKETENGINE} = "poll";
}
}
+ if (!$chose_hiperf && $config{USE_POLL} ne "y")
+ {
+ print "No high-performance socket engines are available, or you chose\n";
+ print "not to enable one. Defaulting to select() engine.\n\n";
+ $config{SOCKETENGINE} = "select";
+ }
$config{USE_FREEBSD_BASE_SSL} = "n";
$config{USE_FREEBSD_PORTS_SSL} = "n";
}
$config{USE_SSL} = "n";
- $config{MODUPDATE} = 'n';
if ($config{HAS_GNUTLS} eq "y" || $config{HAS_OPENSSL} eq "y")
{
yesno('USE_OPENSSL', "Would you like to enable SSL with m_ssl_openssl?");
if ($config{USE_OPENSSL} eq "y")
{
- print "\nUsing OpenSSL SSL module.\nYou will get better performance if you move to GnuTLS in the future.\n";
+ print "\nUsing OpenSSL SSL module.\n";
}
}
}
print "\nCould not detect OpenSSL or GnuTLS. Make sure pkg-config is installed and\n";
print "is in your path.\n\n";
}
-
- yesno('MODUPDATE',"Would you like to check for updates to third-party modules?");
- print "\n";
- if ($config{MODUPDATE} eq "y") {
- print "Checking for upgrades to extra and third party modules... ";
- system "./modulemanager upgrade";
- }
}
# We are on a POSIX system, we can enable POSIX extras without asking
symlink "extra/m_regex_posix.cpp", "src/modules/m_regex_posix.cpp";
-dumphash();
-
if (($config{USE_GNUTLS} eq "y") && ($config{HAS_GNUTLS} ne "y"))
{
print "Sorry, but i couldn't detect gnutls. Make sure gnutls-config is in your path.\n";
- exit(0);
+ exit 1;
}
if (($config{USE_OPENSSL} eq "y") && ($config{HAS_OPENSSL} ne "y"))
{
print "Sorry, but i couldn't detect openssl. Make sure openssl is in your path.\n";
- exit(0);
+ exit 1;
}
-our $failed = 0;
$config{CERTGEN} ||= 'y';
yesno('CERTGEN',"Would you like generate SSL certificates now?") if ($interactive && ($config{USE_GNUTLS} eq "y" || $config{USE_OPENSSL} eq "y"));
}
if ($interactive && $config{CERTGEN} eq 'y')
{
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL Certificates Not found, Generating.. \n\n
-*************************************************************
-* Generating the Private Key may take some time, go grab a *
-* Coffee. Even better, to generate some more entropy if it *
-* is taking a while, open another console and type du / a *
-* few times and get that HD going :) Then answer the *
-* Questions which follow. If you are unsure, just hit enter *
-*************************************************************\n\n";
- $failed = system "./tools/genssl gnutls";
- if ($failed) {
- print "\n\e[1;32mCertificate generation failed!\e[0m\n\n";
- } else {
+ unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem" && -r "$config{CONFIG_DIR}/dhparams.pem") {
+ unless (system './tools/genssl gnutls') {
print "\nCertificate generation complete, copying to config directory... ";
File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
+ File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
print "Done.\n\n";
}
}
print "Symlinking src/modules/m_ssl_openssl.cpp from extra/\n";
symlink "extra/m_ssl_openssl.cpp", "src/modules/m_ssl_openssl.cpp" or print STDERR "Symlink failed: $!";
}
- $failed = 0;
if ($interactive && $config{CERTGEN} eq 'y')
{
- unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem") {
- print "SSL Certificates Not found, Generating.. \n\n
-*************************************************************
-* Generating the certificates may take some time, go grab a *
-* coffee, or something. *
-*************************************************************\n\n";
- system "./tools/genssl openssl";
- print "\nCertificate generation complete, copying to config directory... ";
- File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
- File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
- File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
- print "Done.\n\n";
+ unless (-r "$config{CONFIG_DIR}/key.pem" && -r "$config{CONFIG_DIR}/cert.pem" && -r "$config{CONFIG_DIR}/dhparams.pem") {
+ unless (system './tools/genssl openssl') {
+ print "\nCertificate generation complete, copying to config directory... ";
+ File::Copy::move("key.pem", "$config{CONFIG_DIR}/key.pem") or print STDERR "Could not copy key.pem!\n";
+ File::Copy::move("cert.pem", "$config{CONFIG_DIR}/cert.pem") or print STDERR "Could not copy cert.pem!\n";
+ File::Copy::move("dhparams.pem", "$config{CONFIG_DIR}/dhparams.pem") or print STDERR "Could not copy dhparams.pem!\n";
+ print "Done.\n\n";
+ }
} else {
print "SSL Certificates found, skipping.\n\n"
}
}
depcheck();
-writefiles(1);
+writefiles();
makecache();
+dumphash();
-print "\n\n";
+print "\n";
print "To build your server with these settings, please run '\e[1;32mmake\e[0m' now.\n";
if (($config{USE_GNUTLS} eq "y") || ($config{USE_OPENSSL} eq "y")) {
print "Please note: for \e[1;32mSSL support\e[0m you will need to load required\n";
print "build process. For more info please refer to:\n";
print "\e[1;32mhttp://wiki.inspircd.org/Installation_From_Tarball\e[0m\n";
}
-print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n\n";
-if (($config{OSNAME} eq "OpenBSD") && ($config{CC} ne "eg++")) {
- print "\e[1;32mWARNING!\e[0m You are running OpenBSD but you are using the base gcc package\nrather than eg++. This compile will most likely fail, but i'm letting you\ngo ahead with it anyway, just in case i'm wrong :-)\n";
-}
-
-if ($config{GCCVER} < "3") {
- print <<FOO2;
-\e[1;32mWARNING!\e[0m You are attempting to compile InspIRCd on GCC 2.x!
-GCC 2.x series compilers only had partial (read as broken) C++ support, and
-your compile will most likely fail horribly! If you have any problems, do NOT
-report them to the bugtracker or forums without first upgrading your compiler
-to a newer 3.x or 4.x (or whatever is available currently) version.
-FOO2
-}
+print "*** \e[1;32mRemember to edit your configuration files!!!\e[0m ***\n\n";
-################################################################################
-# HELPER FUNCTIONS #
-################################################################################
sub getcache {
# Retrieves the .config.cache file, and loads values into the main config hash.
open(CACHE, ".config.cache") or return 0;
}
if ($var =~ /^\~\/(.+)$/) {
# Convert it to a full path..
- $var = resolve_directory($ENV{HOME} . "/" . $1);
+ $var = rel2abs($ENV{HOME} . "/" . $1);
}
- elsif ((($config{OSNAME} =~ /MINGW32/i) and ($var !~ /^[A-Z]{1}:\\.*/)) and (substr($var,0,1) ne "/"))
- {
- # Assume relative Path was given.. fill in the rest.
- $var = $this . "/$var";
- }
-
- $var = resolve_directory($var);
+ $var = rel2abs($var);
if (! -e $var) {
print "$var does not exist. Create it?\n[\e[1;32my\e[0m] ";
chomp(my $tmp = <STDIN>);
next;
}
} else {
- if (!is_dir($var)) {
+ if (! -d $var) {
# Target exists, but is not a directory.
print "File $var exists, but is not a directory.\n\n";
next;
}
}
-our $SHARED = "";
-
-my ($mliflags, $mfrules, $mobjs, $mfcount) = ("", "", "", 0);
-
sub writefiles {
- my($writeheader) = @_;
- # First File.. config.h
chomp(my $incos = `uname -n -s -r`);
chomp(my $version = `sh src/version.sh`);
- chomp(my $revision2 = getrevision());
+ my $revision = getrevision();
my $branch = "InspIRCd-0.0";
if ($version =~ /^(InspIRCd-[0-9]+\.[0-9]+)\.[0-9]+/)
{
$branch = $1;
}
- if ($writeheader == 1)
- {
- print "Writing \e[1;32mconfig.h\e[0m\n";
- open(FILEHANDLE, ">include/config.h.tmp");
- print FILEHANDLE <<EOF;
+ print "Writing \e[1;32mconfig.h\e[0m\n";
+ open(FILEHANDLE, ">include/config.h.tmp");
+ print FILEHANDLE <<EOF;
/* Auto generated by configure, do not modify! */
#pragma once
#define BRANCH "$branch"
#define VERSION "$version"
-#define REVISION "$revision2"
+#define REVISION "$revision"
#define SYSTEM "$incos"
#define CONFIG_PATH "$config{CONFIG_DIR}"
#define MOD_PATH "$config{MODULE_DIR}"
EOF
-print FILEHANDLE "#define MAXBUF " . ($config{MAXBUF}+2) . "\n";
-
- if ($config{OSNAME} =~ /SunOS/i) {
- print FILEHANDLE "#define IS_SOLARIS\n";
- }
- if ($config{OSNAME} =~ /MINGW32/i) {
- print FILEHANDLE "#define IS_MINGW\n";
- }
- if ($config{GCCVER} >= 3) {
- print FILEHANDLE "#define GCC3\n";
- }
- if ($config{HAS_STDINT} eq "true") {
- print FILEHANDLE "#define HAS_STDINT\n";
- }
- if ($config{HAS_EVENTFD} eq 'true') {
- print FILEHANDLE "#define HAS_EVENTFD\n";
- }
- if ($config{HAS_CLOCK_GETTIME} eq 'true') {
- print FILEHANDLE "#define HAS_CLOCK_GETTIME\n";
- }
- my $use_hiperf = 0;
- if (($has_kqueue) && ($config{USE_KQUEUE} eq "y")) {
- print FILEHANDLE "#define USE_KQUEUE\n";
- $config{SOCKETENGINE} = "socketengine_kqueue";
- $use_hiperf = 1;
- }
- if (($has_epoll) && ($config{USE_EPOLL} eq "y")) {
- print FILEHANDLE "#define USE_EPOLL\n";
- $config{SOCKETENGINE} = "socketengine_epoll";
- $use_hiperf = 1;
- }
- if (($has_ports) && ($config{USE_PORTS} eq "y")) {
- print FILEHANDLE "#define USE_PORTS\n";
- $config{SOCKETENGINE} = "socketengine_ports";
- $use_hiperf = 1;
- }
- # user didn't choose either epoll or select for their OS.
- # default them to USE_SELECT (ewwy puke puke)
- if (!$use_hiperf) {
- print "no hi-perf, " . $config{USE_POLL};
- if ($config{USE_POLL} eq "y")
- {
- print FILEHANDLE "#define USE_POLL\n";
- $config{SOCKETENGINE} = "socketengine_poll";
- }
- else
- {
- print FILEHANDLE "#define USE_SELECT\n";
- $config{SOCKETENGINE} = "socketengine_select";
- }
- }
-
- if ($config{HAS_DEFER} eq "TCP_DEFER_ACCEPT") {
- print FILEHANDLE "#define USE_TCP_DEFER_ACCEPT";
- } elsif ($config{HAS_DEFER} eq "SO_ACCEPTFILTER") {
- print FILEHANDLE "#define USE_SO_ACCEPTFILTER"
- }
- print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n";
- close(FILEHANDLE);
-
- my $file = 'include/config.h';
- my $diff = 0;
- open my $fh1, $file or $diff = 1;
- open my $fh2, $file.'.tmp' or die "Can't read $file.tmp that we just wrote: $!";
- while (!$diff) {
- my $line1 = <$fh1>;
- my $line2 = <$fh2>;
- if (defined($line1) != defined($line2)) {
- $diff = 1;
- } elsif (!defined $line1) {
- last;
- } else {
- $diff = ($line1 ne $line2);
- }
- }
- if ($diff) {
- unlink $file;
- rename "$file.tmp", $file;
- } else {
- unlink "$file.tmp";
- }
+ if ($config{HAS_EVENTFD}) {
+ print FILEHANDLE "#define HAS_EVENTFD\n";
+ }
+ if ($config{HAS_CLOCK_GETTIME}) {
+ print FILEHANDLE "#define HAS_CLOCK_GETTIME\n";
}
- # Write all .in files.
- my $tmp = "";
- my $file = "";
- my $exe = "inspircd";
+ print FILEHANDLE "\n#include \"threadengines/threadengine_pthread.h\"\n";
+ close(FILEHANDLE);
+
+ unlink 'include/config.h';
+ rename 'include/config.h.tmp', 'include/config.h';
# Do this once here, and cache it in the .*.inc files,
# rather than attempting to read src/version.sh from
# compiled code -- we might not have the source to hand.
- # Fix for bug#177 by Brain.
-
- chomp($version = `sh ./src/version.sh`);
- chomp(my $revision = getrevision());
- $version = "$version(r$revision)";
-
- # We can actually parse any file starting with . and ending with .inc,
- # but right now we only parse .inspircd.inc to form './inspircd'
- prepare_dynamic_makefile();
my @dotfiles = qw(main.mk inspircd);
- push @dotfiles, 'org.inspircd.plist' if $config{OSNAME} eq 'darwin';
+ push @dotfiles, 'org.inspircd.plist' if $^O eq 'darwin';
foreach my $file (@dotfiles) {
open(FILEHANDLE, "make/template/$file") or die "Can't open make/template/$file: $!";
$_ = join '', <FILEHANDLE>;
close(FILEHANDLE);
- $config{BUILD_DIR} ||= resolve_directory($config{ME}."/build");
+ $config{BUILD_DIR} ||= rel2abs($topdir."/build");
+ $config{COMPILER} = lc $cxx{NAME};
+ $config{SYSTEM} = lc $^O;
for my $var (qw(
- CC SYSTEM BASE_DIR CONFIG_DIR MODULE_DIR BINARY_DIR BUILD_DIR DATA_DIR UID
- STARTSCRIPT DESTINATION SOCKETENGINE
+ CXX COMPILER SYSTEM BASE_DIR CONFIG_DIR MODULE_DIR BINARY_DIR BUILD_DIR DATA_DIR UID
+ STARTSCRIPT SOCKETENGINE
)) {
s/\@$var\@/$config{$var}/g;
}
- s/\@EXECUTABLE\@/$exe/ if defined $exe;
+
s/\@VERSION\@/$version/ if defined $version;
if ($file eq 'main.mk') {
s/\@IFDEF (\S+)/ifdef $1/g;
s/\@IFNDEF (\S+)/ifndef $1/g;
s/\@IFEQ (\S+) (\S+)/ifeq ($1,$2)/g;
+ s/\@IFNEQ (\S+) (\S+)/ifneq ($1,$2)/g;
s/\@ELSIFEQ (\S+) (\S+)/else ifeq ($1,$2)/g;
s/\@ELSE/else/g;
s/\@ENDIF/endif/g;
s/\@IFDEF (\S+)/.if defined($1)/g;
s/\@IFNDEF (\S+)/.if !defined($1)/g;
s/\@IFEQ (\S+) (\S+)/.if $1 == $2/g;
+ s/\@IFNEQ (\S+) (\S+)/.if $1 != $2/g;
s/\@ELSIFEQ (\S+) (\S+)/.elif $1 == $2/g;
s/\@ELSE/.else/g;
s/\@ENDIF/.endif/g;
}
}
-sub prepare_dynamic_makefile
-{
- my $i = 0;
-
- if (!$has_epoll)
- {
- $config{USE_EPOLL} = 0;
- }
- if (!$has_kqueue)
- {
- $config{USE_KQUEUE} = 0;
- }
- if (!$has_ports)
- {
- $config{USE_PORTS} = 0;
- }
-}
-
# Routine to list out the extra/ modules that have been enabled.
# Note: when getting any filenames out and comparing, it's important to lc it if the
# file system is not case-sensitive (== Epoc, MacOS, OS/2 (incl DOS/DJGPP), VMS, Win32
my @deps = split / +/, getdependencies($extrapath);
for my $dep (@deps) {
next if scalar(grep { $_ eq $dep } (@extras)) > 0; # Skip if we're going to be enabling it anyway.
- if (!-e "src/modules/$dep") {
+ if (!-e "src/modules/$dep" && !-e "include/$dep") {
if (-e "src/modules/extra/$dep") {
print STDERR "Will also enable extra \e[32;1m$dep\e[0m (needed by \e[32;1m$extra\e[0m)\n";
push @extras, $dep;
projects / user / henk / code / inspircd.git / blobdiff